Answer:
50/20 = ans
Explanation:
you tube - superio s
Forces at a Distance
Use Equation: e-r/T
If the distance between the two foci in an orbit is 4 AU, and the length of the major axis is 9 AU, what is the eccentricity of the orbit?
O 0.888
O 0.222
O 2.25
O 0.444
These 2 processes cause watersheds to change.
Answer:
Change is an integral component of the watershed. The wide variations in river and stream flow regularly change shorelines, stream channels and stream corridors. Upland areas of watersheds also undergo changes due to ecological succession, disease, competition, human activity and other factors.
Explanation:
Give me two examples of a pushing force and two examples of a pulling force:
Answer:
A pushing force example could be a button, like on a keyboard.
Another example would be a piston.
An example of a pulling force could be a lever.
Another example could be rope.
Hope this helps! c:
Water heating over a stove
ahh yes
Y. E. S. W A. T. E. R. A. N. D. S T. ON. V. E
Consider two soap bubbles having radii r1 and r2 (r1 < r2) connected via a valve. What happens if we open the valve?
Answer:
Explanation:
The radius of the smaller bubble, r1 will decrease and that of the bigger bubble, r2 will increase.
The pressure that is present in the smaller bubble usually is greater than the pressure that exists inside that of the bigger bubble. This then makes air to flow from r1 to r2 thereby making the radius of the smaller bubble r1, to decrease while keeping that of the bigger bubble r2 higher.
A 8.0-g bullet with an initial velocity of 115.0 m/s lodges in a block of wood and comes to rest at a
distance of 4.0 cm. Assume the bullet undergoes a constant negative acceleration; it slows at a
constant rate.
a. How much time does it take for the bullet to stop?
b. What is the impulse on the woodblock?
c. What is the average force experienced by the block?
A bird flies South for the winter at a constant force of 51 N. Suddenly a wind with a force of 35 N blows due South. What is the net force of the bird?
Answer:
86N
Explanation:
The bird is going south and the wind is also blowing south so all the force is acting in the same direction thus it all adds up.
If a chemical reaction has a AH value of -125 kJ, it would be considered what?
Answer:
Exothermic Reaction
Explanation:
ENDOTHERMIC REACTION: A chemical reaction is considered endothermic if the energy is absorbed during the reaction. In other words, if the energy is required by the reactants to proceed with the reaction, then the reaction is endothermic.
The value of enthalpy change ΔH is positive in such reactions showing intake of energy.
EXOTHERMIC REACTION: A chemical reaction is considered exothermic if the energy is released during the reaction. In other words, if the energy is produced as a product of the reaction, then the reaction is exothermic.
The value of enthalpy change ΔH is negative in such reactions showing the release of energy.
Since, the value of ΔH = -125 KJ, is negative for the given reaction.
Therefore, it would be considered as Exothermic Reaction.
Electricity is the _____________ of electrons, because electrons _____________ from atom to atom.
Electricity is the [tex]\sf{\underline{flow}}[/tex] of electrons, because electrons [tex]\sf{\underline{passes}}[/tex] from atom to atom.
This is graded help hurry pls
A block of density 8.9g/cm³ measures 5cm by 2cm, Given that the force of gravity is 10N/kg. Determine the maximum pressure
Answer:
Maximum pressure = 4450 N/m²
Explanation:
We'll begin by calculating the volume of the block. This can be obtained as follow:
Volume (V) = 5 cm × 3 cm × 2 cm
V = 30 cm³
Next, we shall determine the mass of the block. This can be obtained as follow:
Density = 8.9 g/cm³
Volume = 30 cm³
Mass =?
Density = mass /volume
8.9 = mass / 30
Cross multiply
Mass = 8.9 × 30
Mass = 267 g
Next, we shall covert 267 g to Kg.
1000 g = 1 Kg
Therefore,
267 g = 267 g × 1 Kg / 1000
267 g = 0.267 Kg
Thus, the mass of the block is 0.267 Kg
Next, we shall determine the force.
Force of gravity (g) = 10 N/Kg
Mass (m) = 0.267 Kg
Force (F) =?
F = mg
F = 0.267 × 20
F = 2.67 N
Next, we shall determine the minimum area since we are trying to obtain the maximum pressure. This can be obtained as follow:
Minimum area = 3 cm × 2 cm
Covert each measurement to metre (m) by dividing each measurement by 100
Minimum area = 0.03 m × 0.02 m
Minimum area = 0.0006 m²
Finally, we shall determine the maximum pressure. This can be obtained as follow:
Force (F) = 2.67 N
Minimum area = 0.0006 m²
Maximum pressure =?
Maximum pressure = Force /minimum area
Maximum pressure = 2.67 / 0.0006
Maximum pressure = 4450 N/m²
Why should Mike repeat this investigation?
Mike needs to make sure that all the skateboards are not affected by friction.
Mike needs to have more than one set of numbers to make an accurate graph
The investigation needs multiple trials to determine which board is the control.
The investigation needs to be repeated several times to have the most accurate data.
Answer:
D
Explanation:
If a 12 kg object's velocity changes from 5 m/s to 10 m/s in 5 s, what amount of force was applied to increase the speed of the object?
Answer:
12 N
Explanation:
Given that a 12 kg object's velocity changes from 5 m/s to 10 m/s in 5 s, what amount of force was applied to increase the speed of the object?
Solution
M = 12 kg
T = 5 s
The formula to use will be
F = ma
Where
Acceleration a = change in velocity/ time
Acceleration a = ( 10 - 5 ) / 5
Acceleration a = 5 / 5
Acceleration a = 1 m/s^2
Substitutes a into the formula above
F = ma
F = 12 × 1
F = 12 N
Therefore, the amount of force applied to increase the speed of the object is 12 N.
PLZZ IF ANYONE KNOWS SCIENCE HELP ME PLZ I this is so confusing :(
ill liderally make a question with 50 and a brainliest since you helped me ;-;
Answer:
i think it would be either b or c because....
Explanation:
"The desert biome is best adapted for aloe because aloe plant usuallly grows in open area under sunlight exposure where the intensity of sunlight is very high. Its grows in very rocky, dry and open areas."
PLEASE help its timed..
Which statement describes how a machine can help make work easier?
A)It can put out more force than the input force by decreasing the distance over which force is applied.
B) It can increase the amount of work performed if the output force is in the same direction as the input force.
C) It can apply a greater output force over a greater distance compared to the input force and distance.
D) It can increase the distance over which output force acts by applying less output force than input force.
Answer:
D
Explanation:
by increasing the distance through which force is applied, by changing the direction of force applied or by multiplying force of speed of the energy applied
What type of FORCE is GRAVITY?
a) PULL
b) PUSH
c) ENERGY
d) It is not a FORCE at all.
Answer:
It is (a) pull because when we are on earth we have gravity and it is pulling us down hope you have a great day!! :)
Explanation:
Which color has the lowest frequency?
1.) Cameron loads a wheelbarrow full of dirt. She then holds up both handles and begins to push it across her yard. The push Cameron uses to move the wheelbarrow is an example of
trajectory
motion
dynamics
force
2.) Jeremy is pushing his two children on a set of swings. He gives his daughter a push and she swings about three feet high. Jeremy gives his son the same push, but he only swings about two feet high. What could account for the difference in how high the kids got?
Jeremy's daughter has more mass, so it takes less force to get her into the air.
Jeremy's son has more mass, so it would take more force to reach the same height as his daughter.
Jeremy's son has less mass, so it would take more force to reach the same height as his daughter.
Jeremy's daughter has more mass, so she accelerates faster than his son.
Answer:
C (Force)
Explanation:
Cmon we should all know dis
Answer:
force and Jeremy's son has more mass
Explanation:
pushing requires force and the son moves less
The picture below shows a wheelbarrow. Using a wheelbarrow can make it easier to lift a heavy object by
A. changing the direction of the input force.
B. reducing the amount of input force needed to lift the object.
C. decreasing the distance over which the input force is applied.
D. reducing the weight of the object.
Answer:
B IS CORRECT
Explanation:
A king orders a gold crown having a mass of 0.5 kg. When it arrives from the metalsmith, the volume of the crown is found to be 185 cm3. Is the crown made of solid gold?
Answer:
The crown is not made of solid gold.
Explanation:
Density ρ = M/V. M and V are given.
The density of the crown is (0.5 kg)/(185 cm3) * (106 cm3)/(1 m3) = 2.7*103 kg/m3.
plz answer fast need your help plz
hello friends the answer does not exist
do you love me or not
What is happening when an oxygen molecule is formed from two separate oxygen atoms?
Two from each oxygen atom. For examples of covalent bonding are water (H2O), and carbon dioxide (CO2). Covalent compounds are mostly gases or liquids with low melting points.
A dog sits on a flat surface. If the dog has a mass of 13 kg, what is the normal force acting on it?
85 N
13 N
127 N
41 N
Answer:
127
Explanation:
f(n)=mg
(13)*(9.81)
127.4N
1. The wavelength of light of a particular colour is
5800 A. Express it in (a) nanometre and (b) metre.
Answer:
In Nanometer- 580 nanaometers
In Meter - 5.8 x 10^-7
If the vehiche has a speed of 24.0 m/s at point a what is the force of the track on the vehicle at this point?
Question:
A roller-coaster vehicle has a mass of 500 kg when fully loaded with passengers. If the vehicle has a speed of 20.0 m/s at point A, what is the force exerted by the track on the vehicle at this point?
See attachment
Answer:
33700 Newton
Explanation:
Given
[tex]m = 500kg\\v = 24.0m/s\\r=10m[/tex]
First, we determine the forces acting on mass m.
They are: the force exerted by the track (Fn) and the weight of the vehicle (W)
So, the net force is:
[tex]F_{net} = F_n - W[/tex]
[tex]W=mg[/tex]
So:
[tex]F_{net} = F_n - mg[/tex]
Make Fn the subject
[tex]F_n = F_{net} + mg[/tex]
Fnet is calculated as:
[tex]F_{net} = F_c = \frac{mv^2}{r}[/tex] --- i.e. the centripetal force
So:
[tex]F_n = F_{net} + mg[/tex]
[tex]F_n = \frac{mv^2}{r} + mg[/tex]
[tex]F_n = \frac{500 * 24^2}{10} + 500 * 9.8[/tex]
[tex]F_n = 28800 + 4900[/tex]
[tex]F_n = 33700N[/tex]
The weight of a luggage is 69.3 N on the moon. Find its weight on the Earth.
Answer:
Explanation:
weight on moon = 1/6* weight on earth
69.3=1/6*weight on earth
weight on earth = 69.3*6
weight on earth = 415.8 N
What could be the average human density? Justify?
Answer:
985 kg/m3
Explanation:
The average density of the human body is 985 kg/m3 k g / m 3 , and the typical density of seawater is about 1020 kg/m3 k g / m 3 .
Explanation:
the worldwide human population density is around 7,500,000,000 ÷ 510,000,000 = 14.7 per km2 (38 per sq. mi.). If only the Earth's land area of 150,000,000 km2 (58,000,000 sq. mi.) is taken into account, then human population density is 50 per km2 (129 per sq.
What is the kinetic energy of a 78kg object moving at a velocity of 2.5m/s
Answer:
[tex]\boxed {\boxed {\sf 243.75 \ J }}[/tex]
Explanation:
Kinetic energy is energy an object has due to motion. The formula is:
[tex]KE=\frac {1}{2}mv^2[/tex]
The mass of the object is 78 kilograms and the velocity is 2.5 meters per second.
[tex]m= 78 \ kg \\v= 2.5 \ m/s[/tex]
Substitute the values into the formula.
[tex]KE= \frac {1}{2} (78 \ kg)*(2.5 \ m/s)^2[/tex]
Solve according to PEMDAS: Parentheses, Exponents, Multiplication, Division, Addition, and Subtraction. Solve the exponent first.
(2.5 m/s)²= 2.5 m/s * 2.5 m/s = 6.25 m²/s²[tex]KE= \frac {1}{2}(78 \ kg)*6.25 \ m^2/s^2[/tex]
Multiply all three numbers together.
[tex]KE=39 \ kg * 6.25 \ m^2/s^2\\[/tex]
[tex]KE=243.75 \ kg*m^2/s^2[/tex]
1 kilogram meter squared per second squared is equal to 1 Joule. So, our answer of 243.75 kg *m²/s² is equal to 243.75 Joules.
[tex]KE=243.75 \ J[/tex]
The object has 243.75 Joules of kinetic energy.
Please ans fast I will mark brainliest
For sure
Un cuerpo lleva una velocidad de 122k por hora y de golpe frena reduciendo su velocidad a 50km por hora en un instante de tiempo de 4,5 segundos y la fuerza de frenado es de 1200n, ¿cual será su masa?
Answer:
La masa del objeto es 270.027 kilogramos.
Explanation:
Asumamos que el cuerpo decelera a tasa constante, entonces podemos calcularlo por medio de la siguiente ecuación cinemática:
[tex]a = \frac{v-v_{o}}{t}[/tex] (1)
Donde:
[tex]v_{o}[/tex] - Velocidad inicial, en metros por segundo.
[tex]v[/tex] - Velocidad final, en metros por segundo.
[tex]t[/tex] - Tiempo, en segundos.
[tex]a[/tex] - Deceleración, en metros per segundo al cuadrado.
Si sabemos que [tex]v_{o} = 33.889\,\frac{m}{s}[/tex], [tex]v = 13.889\,\frac{m}{s}[/tex] y [tex]t = 4.5\,s[/tex], entonces la deceleración experimentada por el cuerpo es:
[tex]a = \frac{v-v_{o}}{t}[/tex]
[tex]a = -4.444\,\frac{m}{s^{2}}[/tex]
Por las Leyes de Newton, tenemos que la masa del cuerpo se calcula a partir de la siguiente expresión:
[tex]m = \frac{F}{a}[/tex] (2)
Donde:
[tex]m[/tex] - Masa, en kilogramos.
[tex]F[/tex] - Fuerza de frenado, en newtons.
Si sabemos que [tex]F = -1200\,N[/tex] y [tex]a = -4.444\,\frac{m}{s^{2}}[/tex], entonces la masa del cuerpo es:
[tex]m = \frac{F}{a}[/tex]
[tex]m = 270.027\,kg[/tex]
La masa del objeto es 270.027 kilogramos.
