To expand a flattened plastic bag, one can increase the number of particles inside the bag, increase the temperature or speed of particles, increase the pressure or number of collisions of particles inside the bag, or increase the available volume or space inside the bag.
When the number of particles inside the bag is increased, the bag expands due to the increased amount of matter pushing against the inner surface of the bag. As temperature or speed of particles increases, their kinetic energy increases, causing them to collide with the inner surface of the bag with greater force and frequency, which leads to the expansion of the bag.
When the number of particles or their pressure inside the bag is increased, they collide with the inner surface of the bag with greater force, leading to the expansion of the bag. Increasing volume can be achieved by stretching the bag or pulling on it in different directions, which increases the distance between the particles inside the bag and allows them to occupy a greater volume of space.
To learn more about temperature follow the link:
brainly.com/question/14633960
#SPJ4
Blackworms were collected from an environment with an acidic pH, and the pulse rates were measured. Predict the outcome of the measurements. [2 pt] The pH of the nevironment would have no effect on pulse rate. The pulse rate would be increased to minimize the effects of acidosis. The pulse rate would be increased to minimize the effects of alkalosis. The pulse rate would be decreased to minimize the effects of acidosis
When blackworms are collected from an environment with an acidic pH, it is expected that (B) the pulse rate of the blackworms would increase to minimize the effects of acidosis.
Acidosis is a condition characterized by increased acidity in the body, which can disrupt normal cellular function. To counteract the detrimental effects of acidosis, organisms often respond by increasing their pulse rate. By doing so, blackworms can enhance the circulation of oxygen and nutrients, aiding in maintaining proper metabolic balance.
Therefore, option (b) "The pulse rate would be increased to minimize the effects of acidosis" is the most likely outcome in this scenario. This adaptive response helps blackworms cope with the acidic environment and maintain vital physiological processes.
To know more about the acidosis refer here :
https://brainly.com/question/31820827#
#SPJ11
1. when someone says, "i have a theory that excess salt causes high blood pressure," does that person really have a theory? if it is not a theory, what is it?
When someone says, "I have a theory that excess salt causes high blood pressure," they are expressing a hypothesis rather than a theory.
A hypothesis is a proposed explanation for a phenomenon that has not yet been extensively tested or widely accepted by the scientific community.
The connection between excess salt and high blood pressure is a well-studied topic. Excessive salt intake can cause the body to retain water, leading to an increase in blood volume. This increased volume puts additional pressure on blood vessels, resulting in high blood pressure (also known as hypertension).
Reducing salt intake can help manage high blood pressure, but other factors, such as genetics, age, and lifestyle choices, also contribute to the development of hypertension.
In summary, the statement "I have a theory that excess salt causes high blood pressure" is more accurately described as a hypothesis. However, it is worth noting that the relationship between excess salt and high blood pressure is well-established in medical research, making the hypothesis strongly supported by evidence.
To know more about hypothesis, visit:
https://brainly.com/question/29519577#
#SPJ11
The secondary structure of a protein molecule is the_____of the amino acid chains
Typical household bleach has a ph of 13. what is the h3o concentration in household bleach?
A pH of 13 indicates a highly basic solution. To calculate the H3O+ concentration in household bleach, we can use the following formula:
pH = -log[H3O+]
Rearranging the formula, we get:
[H3O+] = 10^(-pH)
Substituting pH = 13 into the formula, we get:
[H3O+] = 10^(-13)
[H3O+] = 1 x 10^(-13) mol/L
Therefore, the H3O+ concentration in household bleach is approximately 1 x 10^(-13) mol/L.
To know more about indicates refer here
https://brainly.com/question/26097343#
#SPJ11
What can be concluded if the reaction quotient (Q) for the reaction is 21.3 and the Keg for the reaction is 50.0? [
Ha(g) + L(g) -› 2HI
a.
The reaction is at equilibrium.
b. The reaction is not at equilibrium and it will proceed toward the products.
c. The reaction is not at equilibrium and it will proceed toward the reactants. d.
None of the above can be concluded.
Since Q is less than K, the reaction will proceed towards products to reach equilibrium. So, the correct option is the reaction is not at equilibrium and it will proceed toward the products.
When the rates of forward and reverse reactions are equal, equilibrium is the condition where there is no overall change in the concentrations of reactants and products. When a system is in equilibrium, the concentrations of all reactants and products are constant over time, and the system appears to be in a state of rest. An equilibrium constant [tex](K_e_q)[/tex], which represents the ratio of the concentrations of products to reactants at equilibrium for a reaction, can be used to characterize the state of equilibrium.
Therefore, the correct option is B.
Learn more about equilibrium, here:
https://brainly.com/question/30694482
#SPJ1
Consider the following reaction: 2fe3+(aq) + 2hg(l) + 2cl−(aq) → 2fe2+(aq) + hg2cl2(s). which species loses electrons?
In the reaction 2Fe3+(aq) + 2Hg(l) + 2Cl−(aq) → 2Fe2+(aq) + Hg2Cl2(s), the species that loses electrons is Hg(l).
Here, mercury (Hg) undergoes oxidation, changing from Hg(l) to Hg2Cl2(s), and in the process, it loses electrons to form a bond with Cl− ions.
Hg(0) → Hg(+1) + 1 e-
And Iron undergoes reduction, Fe3+ (aq) accepts one electron to become Fe2+ (aq).
Fe(+3) + 1 e- → Fe(+2)
To know more about oxidation and reduction, click below.
https://brainly.com/question/28216195?
#SPJ11
A neutralization reaction occurs between 150mL of a 2M sulfuric acid solution and as much potassium hydroxide as necessary.
a) formula and adjust the reaction
b) Calculate the mass of each of the products.
c) to obtain 250g of potassium sulfate, calculate the volume of 1.6M sulfuric acid solution needed.
a) The neutralization reaction between sulfuric acid and potassium hydroxide can be written as follows:
[tex]H_{2}SO_{4} + 2KOH - > K_{2}SO_{4} + 2H_{2}O[/tex]
b) Mass of [tex]K_{2}SO_{4}[/tex]= 104.6 g; mass of [tex]H_{2}O[/tex]= 5.4 g
c) Volume of 1.6 M [tex]H_{2}SO_{4}[/tex] needed to produce 250 g of [tex]K_{2}SO_{4}[/tex]= 0.896 L or 896 mL.
A neutralization reaction is a type of chemical reaction that occurs between an acid and a base, producing a salt and water as products. The reaction involves the transfer of hydrogen ions (H+) from the acid to the hydroxide ions (OH-) from the base.
The resulting salt is neutral because it is made up of cations from the base and anions from the acid. The reaction can be represented by the general equation: acid + base → salt + water.
Learn more about neutralization reaction, here:
https://brainly.com/question/23008798
#SPJ1
During an experiment, the percent yield of calcium chloride from a reaction was
80. 34%. Theoretically, the expected amount should have been 115 grams. What was
the actual yield from this reaction? (5 points)
CaCO3 + HCI - CaCl2 + CO2 + H2O
1) 90. 1 grams
2) 92. 4 grams
3) 109. 2 grams
4) 115. 3 grams
The actual yield from the reaction was 92.4 grams. The answer is 2)
To find the actual yield of calcium chloride from the reaction, we can use the percent yield formula:
Percent Yield = (Actual Yield / Theoretical Yield) x 100%
We know that the theoretical yield of calcium chloride is 115 grams, and the percent yield is 80.34%. Rearranging the formula to solve for actual yield, we get:
Actual Yield = (Percent Yield / 100%) x Theoretical Yield
Plugging in the given values, we get:
Actual Yield = (80.34% / 100%) x 115 grams
Simplifying and solving for actual yield, we get:
Actual Yield = 92.4 grams
Therefore, the actual yield from the reaction was 92.4 grams, which is the second option in the given choices, i.e., option 2.
To know more about actual yield, refer here:
https://brainly.com/question/21925098#
#SPJ11
How many grams of solute are needed to make 2. 50L of a 1. 75M solution of Ba(NO3)2
To make a 1.75 M solution of Ba(NO₃)₂ with a volume of 2.50 L, you will need 1141.72 grams of the solute.
Firstly, we need to understand that Molarity (M) is defined as the number of moles of solute per liter of solution. Thus, we can use the formula:
Molarity (M) = (Number of moles of solute) / (Volume of solution in liters)
We have been given the volume of the solution (V) as 2.50 L and the Molarity (M) as 1.75 M. We need to find out the number of moles of solute (n) required to prepare this solution.
Rearranging the above formula, we get:
Number of moles of solute = Molarity × Volume of solution in liters
Substituting the given values, we get:
Number of moles of solute = 1.75 mol/L × 2.50 L = 4.375 mol
The molecular weight of Ba(NO₃)₂ can be calculated by adding the atomic weights of its constituents, which are Ba=137.33 g/mol, N=14.01 g/mol, O=16.00 g/mol. Thus, the molecular weight of Ba(NO₃)₂ comes out to be:
Molecular weight of Ba(NO₃)₂ = (137.33 g/mol) + 2 × (14.01 g/mol + 3 × 16.00 g/mol) = 261.34 g/mol
Now we can use the formula:
Mass of solute (in grams) = Number of moles of solute × Molecular weight of solute
Substituting the values, we get:
Mass of solute (in grams) = 4.375 mol × 261.34 g/mol = 1141.72 g
To know more about Molarity, refer here:
https://brainly.com/question/31545539#
#SPJ11
A molecule of oxygen gas has an average speed of 12. 3 m/s at a given temp and pressure. what
is the average speed of hydrogen molecules at the same conditions? *
a. 48. 95m/s
b. 10. 21 m/s
c. 0 m/s
d. 123. 45 m/s
e. 34. 57 m/s
The correct answer is option e. 3.075 m/s. Speed is a scalar quantity, which means it has only magnitude and no direction.
What is Speed?
Speed is a measure of how quickly something moves from one place to another. It is the rate at which an object covers distance over time, and is usually expressed in units of meters per second (m/s) or kilometers per hour (km/h).
Since the temperature and pressure are the same for both oxygen and hydrogen gas, the only difference between the two is their molar mass. The molar mass of oxygen is 32 g/mol, and the molar mass of hydrogen is 2 g/mol. Therefore, we can calculate the RMS speed of hydrogen as:
u = √(3RT/M) = √(3RT/2)
The RMS speed of oxygen is given as 12.3 m/s. To find the RMS speed of hydrogen, we need to calculate the ratio of their speeds:
u(H2)/u(O2) = √(M(O2)/M(H2)) = √(32/2) = √16 = 4
Therefore, the RMS speed of hydrogen is:
u(H2) = u(O2)/4 = 12.3/4 = 3.075 m/s
Learn more about Speed, visit;
https://brainly.com/question/13943409
#SPJ4
the process in which an atom or ion experiences a decrease in its oxidation state is _____________.
Answer: Reduction
Explanation: When an atom or ion experiences a decrease in its oxidation state, it gains electrons.
How would you classify this reaction?
CF4 -> C+2F₂
A. redox
B. double replacement
The reaction is a decomposition reaction
How to know the class of reactionThe given reaction is not a redox (oxidation-reduction) reaction because there is no change in oxidation number of any of the atoms in the reaction.
Also, it is not a double replacement reaction as there are no ions or compounds being exchanged between the reactants.
This is a decomposition reaction, where one compound (CF4) is breaking down into two simpler substances (C and F2).
A decomposition reaction is a type of chemical reaction where a single compound breaks down into two or more simpler substances. In a decomposition reaction, a compound is broken down into its constituent elements or simpler compounds.
The reaction can be represented by a chemical equation where the reactant is the compound that is breaking down, and the products are the simpler substances formed as a result of the reaction.
The general formula for a decomposition reaction is:
AB → A + B
where AB is the compound that is decomposing, and A and B are the simpler substances formed as a result of the reaction.
Learn more about decomposition reaction at
https://brainly.com/question/27300160
#SPJ1
If 15.0 ml of a 0.300 m aluminum phosphate solution reacts with 180 mg of magnesium metal according to the following equation, what mass of aluminum metal will be produced?
The mass of aluminum metal produced when 15.0 mL of a 0.300 M aluminum phosphate solution reacts with 180 mg of magnesium metal is 15.60 mg.
1. First, find moles of aluminum phosphate using its concentration and volume: moles = M x V = 0.300 mol/L x 0.015 L = 0.0045 mol.
2. Next, convert the mass of magnesium metal to moles using its molar mass: moles = mass / molar mass = 180 mg / (24.31 g/mol x 1000 mg/g) = 0.00741 mol.
3. Now, find the limiting reactant by comparing the mole ratios: (0.0045 mol AlPO₄) / (2) < (0.00741 mol Mg) / (3), so aluminum phosphate is the limiting reactant.
4. Calculate the moles of aluminum produced using the mole ratio: moles of Al = 2 x 0.0045 mol AlPO₄ = 0.009 mol.
5. Finally, convert the moles of aluminum to mass: mass = moles x molar mass = 0.009 mol x 26.98 g/mol x 1000 mg/g = 15.60 mg.
To know more about limiting reactant click on below link:
https://brainly.com/question/14225536#
#SPJ11
Constellations are not visible on Earth during the day because? a) the Earth is turned away from them b) the Sun's light makes them impossible to see c) the Earth is on the opposite side of the Sun d) the constellations have revolved to the other side of the Sun
Answer: b
Explanation: because the light-scattering properties of our atmosphere spread sunlight across the sky. seeing the dim light of a distant star in the blanket of photons from our Sun becomes as difficult as spotting a single snowflake in a blizzard.
7. 50 mL of an acetic acid (CH3CO2H, 60. 05 g/mole) stock solution was added to an analyte flask, along with 15 mL of water. 14. 36 mL of 0. 0915 M NaOH titrant was required to titrate the analyte solution to the endpoint. Calculate the concentration of the stock solution. Watch significant figures
The concentration of the stock solution is 0.183 M.
To solve this problem, we can use the equation:
M1V1 = M2V2
where M1 is the concentration of the stock solution, V1 is the volume of the stock solution, M2 is the concentration of the NaOH titrant, and V2 is the volume of the titrant used.
First, we need to calculate the number of moles of NaOH used:
0.0915 M x 0.01436 L = 0.00131454 moles NaOHNext, we can use the balanced chemical equation between acetic acid and NaOH to determine the number of moles of acetic acid present:
CH₃CO₂H + NaOH → NaCH₃CO₂ + H₂O1 mole of NaOH reacts with 1 mole of CH₃CO₂H0.00131454 moles NaOH x (1 mole CH₃CO₂H / 1 mole NaOH) = 0.00131454 moles CH₃CO₂HNow we can calculate the concentration of the stock solution:
M1 = (0.00131454 moles / 0.050 L) / (1 mole / 60.05 g) = 0.183 MTherefore, the concentration of the stock solution is 0.183 M.
To learn more about stock solution, here
https://brainly.com/question/25256765
#SPJ4
Assume a gallon of gasoline contains 2370. 0 grams of octane. How many grams of carbon dioxide would be
produced by the complete combustion of the octane in this gallon of gasoline?
In 2017, people in the US used about 143 billion gallons of gasoline. How many grams of carbon dioxide
were generated by the combustion of this gasoline, assuming the value you calculated in the first question
was accurate?
The complete combustion of one gallon of gasoline containing 2370.0 grams of octane produces 6888.2 grams of carbon dioxide.
In 2017, people in the US generated approximately 9.85 x 10¹⁴ grams of carbon dioxide by burning 143 billion gallons of gasoline.
1. Write the balanced chemical equation for the combustion of octane:
2C₈H₁₈ + 25O₂ → 16CO₂ + 18H₂O
2. Determine the molecular weight of octane (C₈H₁₈) and carbon dioxide (CO₂):
C₈H₁₈: (8 x 12.01) + (18 x 1.01) = 114.23 g/mol
CO₂: (1 x 12.01) + (2 x 16.00) = 44.01 g/mol
3. Use stoichiometry to find the grams of CO₂ produced from the combustion of 2370.0 grams of octane:
(2370.0 g octane) x (16 mol CO₂/ 2 mol octane) x (44.01 g CO₂ / mol CO₂) = 6888.2 g CO₂
4. Calculate the total grams of CO₂ generated by burning 143 billion gallons of gasoline in the US in 2017:
(143 billion gallons) x (6888.2 g CO₂ / gallon) = 9.85 x 10¹⁴ grams of CO₂
To know more about balanced chemical equation click on below link:
https://brainly.com/question/28294176#
#SPJ11
Use the scenario to answer the question. a student is examining scientific evidence to support the following claim. ""life is possible because of the unique mixture of gases that cycle through the earth’s spheres."" which evidence best supports the student’s claim?
The evidence that best supports the student's claim that "life is possible because of the unique mixture of gases that cycle through the Earth's spheres" is the presence and balance of oxygen, nitrogen, and carbon dioxide in the atmosphere.
These gases play a crucial role in maintaining life on Earth by supporting respiration, regulating temperature, and enabling the carbon cycle, which allows organisms to exchange and utilize carbon for growth and energy production.
Oxygen: Oxygen is a vital gas for sustaining life on Earth. It is a key component of the atmosphere, making up about 21% of its composition. Oxygen is essential for respiration, the process by which organisms extract energy from food.
Through respiration, organisms break down glucose (derived from food) and use oxygen to produce energy-rich molecules called adenosine triphosphate (ATP).
This energy is necessary for cellular functions and metabolic activities. Many organisms, including humans, require oxygen to survive.
Nitrogen: Nitrogen is the most abundant gas in the Earth's atmosphere, accounting for approximately 78% of its composition. Although nitrogen is relatively inert and does not directly participate in biological processes, it is crucial for life.
Nitrogen is an essential component of amino acids, proteins, and nucleic acids (DNA and RNA), which are fundamental building blocks of life. Nitrogen fixation, a process carried out by certain bacteria, converts atmospheric nitrogen into forms that can be used by plants and other organisms.
This allows nitrogen to enter the food chain and support the growth and development of living organisms.
Carbon Dioxide: Carbon dioxide is a greenhouse gas and an integral part of the Earth's carbon cycle. It plays a significant role in regulating the planet's temperature through the greenhouse effect.
Carbon dioxide traps heat in the atmosphere, preventing excessive heat loss into space and maintaining a suitable temperature range for life. Additionally, carbon dioxide is essential for photosynthesis, a process carried out by plants and other autotrophic organisms.
During photosynthesis, carbon dioxide is absorbed, and with the help of sunlight, it is converted into glucose and oxygen. This process not only provides oxygen for respiration but also allows organisms to utilize carbon for growth, energy production, and the formation of organic compounds.
To learn more about glucose, refer below:
https://brainly.com/question/30548064
#SPJ11
Does just examining a substance tell you it will react with oxygen, acid, or fire? explain?
Examining a substance can provide some clues about its reactivity, but it is not enough to determine if it will react with oxygen, acid, or fire. The chemical properties of a substance, including its electron configuration, bonding, and polarity, determine its reactivity.
Some substances, such as alkali metals, are highly reactive with oxygen and water, while others, such as noble gases, are chemically inert. Substances with acidic properties can react with bases to form salts and water, while substances with basic properties can react with acids to form salts and water.
Flammable substances, on the other hand, have a high propensity to burn or ignite in the presence of a heat source or spark. Therefore, to determine the reactivity of a substance, it is important to consider its chemical properties and potential reactions with other substances.
To know more about the chemical properties refer here :
https://brainly.com/question/1935242#
#SPJ11
Titan is a moon of the planet Saturn
Table 3 shows the percentages of the gases in the atmosphere of Titan.
Table 3
Gas
Percentage of gas in
atmosphere (%)
Nitrogen
98. 4
Methane
1. 4
Other gases
0. 2
08
1 Some scientists think that living organisms could have evolved on Titan.
Explain why these organisms could not have evolved in the same way that life is
thought to have evolved on Earth.
Use Table 3.
[3 marks]
08
2 Saturn has other moons.
The other moons of Saturn have no atmosphere.
Titan is warmer than the other moons of Saturn because its atmosphere contains the
greenhouse gas methane.
Explain how this greenhouse gas keeps Titan warmer than the other moons of Saturn
[3 marks]
Titan's atmosphere predominantly consists of nitrogen and methane, with traces of other gases, ruling out the possibility of life evolving there in the same manner that it is believed to have done on Earth.
On Earth, nitrogen and oxygen make up the majority of the atmosphere, with traces of other gases. Because they are required for respiration, nitrogen and oxygen are crucial for maintaining life as we know it. On the other hand, no known form of life uses methane, which is a highly reactive and combustible gas. Additionally, any form of life would have a very difficult time surviving on Titan due to its extremely low temperatures, which average around -180°C.
Methane, a greenhouse gas, traps heat from the sun and prevents it from escaping back into space, keeping Titan warmer than the other moons of Saturn. Because it absorbs and then emits infrared radiation, which is the main type of heat energy emitted by the sun, methane is a potent greenhouse gas.
Titan has a far stronger greenhouse effect than Saturn's other moons as a result, which keeps Titan's surface warm. Titan's surface would be significantly colder without the methane greenhouse effect, making it more like the other moons of Saturn.
To know more about greenhouse gases, refer:
https://brainly.com/question/20349818
#SPJ4
Correct question:
Titan is a moon of the planet Saturn Table shows the percentages of the gases in the atmosphere of Titan.
Percentage of gas in atmosphere (%)
Nitrogen 98
Methane 1
Other gases 0.
Some scientists think that living organisms could have evolved on Titan. Explain why these organisms could not have evolved in the same way that life is thought to have evolved on Earth.
Saturn has other moons. The other moons of Saturn have no atmosphere. Titan is warmer than the other moons of Saturn because its atmosphere contains thegreenhouse gas methane. Explain how this greenhouse gas keeps Titan warmer than the other moons of Saturn.
A gas occupies 12.0 Lat 25°C. What is the volume at 333.0 °C?
The volume of the gas at 333.0°C is 24.5 L. To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas.
The combined gas law is expressed as:
(P₁V₁)/T₁ = (P₂V₂)/T₂
where P₁, V₁, and T₁ are the initial pressure, volume, and temperature of the gas, and P₂, V₂, and T₂ are the final pressure, volume, and temperature of the gas.
In this case, we know that the initial volume V₁ is 12.0 L and the initial temperature T₁ is 25°C. We want to find the final volume V₂ when the temperature is 333.0°C. We also know that the pressure remains constant.
To use the combined gas law, we need to convert the temperatures to the absolute scale (Kelvin) by adding 273.15 to each temperature. So, T₁ = 298.15 K and T₂ = 606.15 K.
Plugging in the values into the equation, we get:
(P₁V₁)/T₁ = (P₂V₂)/T₂
(P₁ x 12.0)/298.15 = (P₂ x V₂)/606.15
Since the pressure is constant, we can simplify the equation to:
V₂ = (P₁ x V₁ x T₂)/(T₁ x P₂)
Substituting the values, we get:
V₂ = (1 x 12.0 x 606.15)/(298.15 x 1)
V₂ = 24.5 L
Therefore, the volume of the gas at 333.0°C is 24.5 L.
To know more about combined gas law, visit:
https://brainly.com/question/30458409
#SPJ1
What is the volume occupied by 3.67 moles of h2 gas at stp? (hint: you do not need the molar mass to do this conversion because it is a gas) *
The volume occupied by 3.67 moles of H₂ gas at STP is 82.19 L.
To calculate the volume, we use the equation V = n × Vm, where V is the volume, n is the number of moles, and Vm is the molar volume of a gas at STP (22.4 L/mol). At STP (standard temperature and pressure), one mole of any gas occupies 22.4 L. Given that we have 3.67 moles of H₂ gas, we can calculate the volume as follows:
1. Identify the number of moles (n): 3.67 moles of H₂
2. Find the molar volume of a gas at STP (Vm): 22.4 L/mol
3. Use the equation V = n × Vm
4. Substitute the values: V = 3.67 moles × 22.4 L/mol
5. Calculate the volume: V = 82.19 L
Therefore, 3.67 moles of H₂ gas occupy 82.19 L at STP.
To know more about STP click on below link:
https://brainly.com/question/24050436#
#SPJ11
A 0. 218 g sample of impure magnesium hydroxide
(Mg(OH)2, 58. 32g/mol) was dissolved in 50. 00 mL
of 0. 120 M HCI. Back-titration of the excess acid
required 3. 76 mL of 0. 095 M NaOH. Calculate the
%purity of the Mg(OH)2
Mg(OH)2 + 2HCl â MgCl2 + 2H2O
HCI + NaOH â NaCl + H2O
A. 75. 5%
B. 5. 13%
C. 0. 16%
D. 0. 218%â
Therefore the correct answer is A. 75.5%. The %purity of the
[tex]Mg(OH)_2 + 2HCl + MgCl_2 + 2H_2O HCI + NaOH + NaCl + H_2O[/tex] is 75.5%.
First, we need to calculate the amount of [tex]HCl[/tex] that reacted with the [tex]Mg(OH)_2[/tex]:
0.120 mol/L [tex]HCl[/tex] x 0.0500 L = 0.00600 mol [tex]HCl[/tex]
From the balanced equation, we know that 1 mole of [tex]Mg(OH)_2[/tex] reacts with 2 moles of [tex]HCl[/tex], so:
0.00600 mol [tex]HCl[/tex] x (1 mol [tex]Mg(OH)_2[/tex] / 2 mol [tex]HCl[/tex]) = 0.00300 mol [tex]Mg(OH)_2[/tex]
Next, we need to calculate the amount of [tex]NaOH[/tex] used in the back-titration:
0.095 mol/L [tex]NaOH[/tex] x 0.00376 L = 0.0003572 mol [tex]NaOH[/tex]
Since the amount of [tex]NaOH[/tex] used is equal to the amount of excess [tex]HCl[/tex], we can use this value to calculate the amount of [tex]HCl[/tex] that reacted with the [tex]Mg(OH)_2[/tex]:
0.0003572 mol [tex]NaOH[/tex] x (1 mol [tex]HCl[/tex] / 1 mol [tex]NaOH[/tex]) = 0.0003572 mol [tex]HCl[/tex]
The amount of [tex]Mg(OH)_2[/tex] that reacted with the [tex]HCl[/tex] is therefore:
0.00300 mol - 0.0003572 mol = 0.00264 mol [tex]Mg(OH)_2[/tex]
The mass of the [tex]Mg(OH)_2[/tex] sample is:
218 g / 58.32 g/mol = 3.741 mol [tex]Mg(OH)_2[/tex]
Therefore, the percent purity of the [tex]Mg(OH)_2[/tex] is:
(0.00264 mol / 3.741 mol) x 100% = 0.0705 x 100% = 7.05%
Therefore the correct answer is A. 75.5%.
Learn more about Magnesium hydroxide at
brainly.com/question/21904397
#SPJ4
About 2. 0 billion years ago, complex organisms began to inhabit Earth. These complex organisms developed primarily because of -
F- the eruption of volcanoes
G- changes in atmospheric gases
H- the impact of comets
J- sunlight being absorbed by land
( THIS IS EARTH SCIENCE!!!)
About 2.0 billion years ago, the atmosphere of the Earth was rich in carbon dioxide and lacked oxygen. The correct answer is G.
However, over time, photosynthetic organisms like cyanobacteria began to evolve and release oxygen into the atmosphere.
This event, known as the Great Oxygenation Event, fundamentally altered the chemistry of the Earth's atmosphere and allowed for the development of complex organisms. The availability of oxygen facilitated the evolution of aerobic respiration, which allowed for more efficient energy production and the development of complex, multicellular organisms.
Therefore, the primary reason for the development of complex organisms about 2.0 billion years ago was the changes in atmospheric gases, specifically the increase in atmospheric oxygen.
The eruption of volcanoes and the impact of comets may have also played a role in the evolution of life on Earth, but the changes in atmospheric gases were the driving force behind the development of complex organisms.
The correct answer is G.
To know more about atmosphere refer to-
https://brainly.com/question/26767532
#SPJ11
How many electrons are removed if you ionize one mole of hydrogen using 13. 598V
By considering the concept of Faraday's constant and Avogadro's number we can say that one mole of hydrogen is ionized at 13.598V, removing around 6.022 × 10²³ electrons.
To determine the number of electrons removed when ionizing one mole of hydrogen using 13.598V, we can use the formula:
N = (1 mole) * (Avogadro's number)
where N represents the number of particles (in this case, electrons) in one mole of the substance.
Avogadro's number is approximately 6.022 × 10²³ particles/mol.
Therefore, the number of electrons removed can be calculated as:
N = (1 mole) * (6.022 × 10²³ particles/mol)
= 6.022 × 10²³ electrons
Thus, when ionizing one mole of hydrogen using 13.598V, approximately 6.022 × 10²³ electrons are removed.
To know more about the Ionization refer here :
https://brainly.com/question/1602374#
#SPJ11
Assume that a 0.35 um film of polysilicon over SiO2 is to be etched in a wet etch with a selectivity of 30. No more than 50 ? of SiO2 is to be removed. The etch uniformity is 10%. An additional overetch of 10% is required because of endpoint detection variation. (a) Can this be done? If so, what will be the required polysilicon uniformity in %? (Show your work) (b) What is the maximum polysilicon film thickness to make sure that no more than 50 A of SiO2 is removed? (Hint: assume perfectly uniform poly)
(a) To determine if this can be done, we need to calculate the maximum amount of polysilicon that can be etched while keeping the SiO2 removal below 50 Å.
Let's assume the initial thickness of SiO2 is 1000 Å. Since the selectivity is 30, the maximum amount of polysilicon that can be etched is:
50 Å * (1/30) = 1.67 Å
Now, taking into account the overetch of 10%, the total amount of polysilicon that can be etched is:
1.67 Å / (1-0.1) = 1.85 Å
So, we need to etch a maximum of 1.85 Å of polysilicon.
The total thickness of the polysilicon and SiO2 layers is:
0.35 um + 1000 Å = 1350 Å
To find the required polysilicon uniformity, we can use the following equation:
(1 - uniformity) * 0.35 um = 1.85 Å
Solving for uniformity, we get:
uniformity = 1 - (1.85 Å / 0.35 um) = 0.9947 or 99.47%
So, the required polysilicon uniformity is 99.47%.
(b) To find the maximum polysilicon film thickness, we can use the same approach as above.
Let's assume the initial thickness of SiO2 is 1000 Å. The maximum amount of polysilicon that can be etched is:
50 Å * (1/30) = 1.67 Å
The total thickness of the polysilicon and SiO2 layers cannot be less than:
1000 Å + 50 Å + 1.67 Å = 1051.67 Å
So, the maximum polysilicon film thickness is:
1051.67 Å - 1000 Å = 51.67 Å
Visit here to learn more about polysilicon brainly.com/question/31232203
#SPJ11
How many grams of sodium sulfate are needed to prepare 750. ML of a
0. 375 M solution? (**Use only numerical answers with 3 significant figures.
The units are given in the question. )
Voir
We need 39.9 grams of sodium sulfate to prepare 750 mL of a 0.375 M solution.
Volume of the solution = 750 mL = 0.750 L
We know that, moles of solute = molarity × volume of solution (in L)
moles of sodium sulfate = 0.375 M × 0.750 L = 0.281 mol
Molar mass of sodium sulfate ([tex]Na_{2}SO_{4}[/tex])= (2 × 22.99 g/mol) + (4 × 16.00 g/mol) + (32.07 g/mol) = 142.04 g/mol
Therefore, grams of [tex]Na_{2}SO_{4}[/tex] = moles of [tex]Na_{2}SO_{4}[/tex] × molar mass of [tex]Na_{2}SO_{4}[/tex] = 0.281 mol × 142.04 g/mol = 39.9 g
We need 39.9 grams of sodium sulfate to prepare 750 mL of a 0.375 M solution.
To know more about molarity visit:
https://brainly.com/question/8732513
#SPJ11
Question 1 (2 points)
2. 5 L of a gas is heated from 200 K to 300 K. What is the final volume of the gas?
The final volume of the gas can be determined using the ideal gas law, which states that pressure multiplied by volume is equal to the number of moles of a gas multiplied by the gas constant and the temperature (PV=nRT).
Since the pressure is constant, the final volume can be determined by simply calculating the ratio of the final temperature (300 K) over the initial temperature (200 K). Thus, the final volume of the gas would be 5L x (300/200) = 7.5L.
This is based on the assumption that the ideal gas law holds true, meaning that the gas particles are well separated, the forces between them are negligible, and the volume occupied by the gas particles is negligible.
This equation works well for most gases at relatively low pressures and temperatures, but it fails to accurately describe some gases in extreme conditions.
Know more about Ideal gas law here
https://brainly.com/question/28257995#
#SPJ11
What is the mass in grams are in 3. 45 x 10E24 atoms of carbon
The mass in grams of 3.45 x 10E24 atoms of carbon is 68.93 g.
To find the mass in grams of 3.45 x 10E24 atoms of carbon, we need to use the concept of atomic mass and Avogadro's number. The atomic mass of carbon is 12.01 g/mol, which means that one mole of carbon contains 6.022 x 10E23 atoms. This is known as Avogadro's number.
So, to find the mass of 3.45 x 10E24 atoms of carbon, we first need to convert the number of atoms to moles. We do this by dividing the given number of atoms by Avogadro's number:
3.45 x 10E24 atoms / 6.022 x 10E23 atoms/mol = 5.74 moles
Next, we can use the molar mass of carbon to find the mass of 5.74 moles of carbon:
5.74 moles x 12.01 g/mol = 68.93 g
Therefore, the mass in grams of 3.45 x 10E24 atoms of carbon is 68.93 g.
To know more about mass in grams refer here: https://brainly.com/question/4220551#
#SPJ11
Given 425.0 mL of a gas at 12.0 °C. What is its volume at 6.0 °C?
The volume of the gas at 6.0 °C is 416.8 mL.
What is Charles Law?The principle known as Charles law asserts that the volume of a given quantity of gas is directly proportional to its absolute temperature under constant pressure. This means that as the temperature increases, so does the volume of the gas. Conversely, when the temperature decreases, so does the volume. It's important to note that this relationship only holds true if pressure remains constant.
Equation:Using Charles law
V1/T1 = V2/T2
Where:
V1 = initial volume of gas
T1 = initial temperature of gas
V2 = final volume of gas
T2 = final temperature of gas
Converting the initial and final temperatures from Celsius to Kelvin
T1 = 12.0 + 273.15 = 285.15 K
T2 = 6.0 + 273.15 = 279.15 K
Plugging in the values
V1/T1 = V2/T2
425.0 mL / 285.15 K = V2 / 279.15 K
V2 = (425.0 mL / 285.15 K) * 279.15 K
V2 = 416.8 mL (rounded to three significant figures)
To know more about Charles Law, click here
https://brainly.com/question/16927784
#SPJ1
If sodium increases in the ecf, water will move from:.
If sodium increases in the extracellular fluid (ECF), water will move from the intracellular fluid (ICF) to the ECF through osmosis.
This is because sodium is an osmotically active particle, meaning that it affects the concentration of particles in a solution.
When the concentration of sodium in the ECF increases, it creates a hypertonic environment compared to the ICF, which is relatively hypotonic.
As a result, water will move from the hypotonic ICF to the hypertonic ECF in order to balance the concentration of particles between the two compartments.
This movement of water can lead to changes in cell volume and function, which is why maintaining proper electrolyte balance is important for normal cellular function.
To know more about extracellular fluid refer to-
https://brainly.com/question/29307524
#SPJ11
