Answer:
Pour the mixture through a filter to separate the sand, then evaporate the liquid to separate the salt.
Explanation:
There are various methods used to separate single substances from a mixture. The method adopted depends upon the type of mixture and the ingredients used in it. According to the given question, the mixture comprises of sand, salt and water. Here, the first process will be the process of filtration. Through filtration, the salt-water solution and sand can be separated. Salt-water solution can be separated by the process of evaporation in which sat and water will be separated individually.
If 25.98 mL of 0.1180 M KOH reacts with 52.50 mL of CH3COOH solution, what is the molarity of the acid solution?
Answer:
Explanation:
We shall use the formula S₁V₁ = S₂V₂
S₁ = .1180 M , V₁ = 25.98 mL
S₂ = ? , V₂ = 52.50 mL
.1180 M x 25.98 = 52.50 x S₂
S₂ = .0584 M
Molarity of the acid solution = .0584 M .
The concentration of the acid solution is 0.058 M.
The equation of the reaction is;
CH3COOH(aq) + KOH(aq) -----> CH3COOK(aq) + H2O(l)
The following are known;
Concentration of base CB = 0.1180 M
Volume of base VB = 25.98 mL
Concentration of acid CA = ?
Volume of acid VA = 52.50 mL
Number of moles of acid NA = 1
Number of moles of base NB = 1
Using;
CAVA/CBVB =NA/NB
CAVANB = CBVBNA
CA= CBVBNA/VANB
CA = 0.1180 M × 25.98 mL × 1/52.50 mL × 1
CA = 0.058 M
Learn more: https://brainly.com/question/24381583
Which of the following reactions will proceed as drawn below? (Yes or No)
Answer:
i wish i could help but t know either so i wish you luck for an answer once again truly sorry don'
Explanation:
i am sorry but i do not know :(
Rahul and Manav each were given a mixture of iron filings and sulphur powder. Rahul heated the mixture strongly and a new substance was formed. Write three points of difference between the two.Required to answer.
Answer:
sure
Explanation:
The substance formed after heating the mixture of that of Rahul is caleed a compound. Whereas, Manav's mixture still remains in its current stae that is a heterogeneous mixture.
The compound formed is in black in color whereas the mixture is a mix of brownish-red and yellow.
The compound is a homogeneous mixture whereas the mixture is a heterogenous mixture because of its uneven distribution.
There are exaclty 640 acres in one square mile. How many square meters are in 2.2 acres?
Answer:
8,903.09 square meters
Explanation:
Doing a quick search online we can see that there are exactly 4046.86 square meters in a single acre (1 acre). Therefore, we can simply use the rule of three to calculate the total amount of square meters in 2.2 acres. We do this by multiplying 2.2 acres by 4046.86 square meters and then dividing by 1 acre to solve for x.
1 acre <=====> 4046.86 square meters
2.2 acres <====> x
(2.2 * 4046.86) / 1 = x
8903.09 / 1 = x
8,903.09 = x
Finally, we can see that there are 8,903.09 square meters in 2.2 acres.
Why is a fatty acid called a fatty acid
Answer:
Fatty acids are fairly long linear hydrocarbon chains with a carboxylic acid group at one end. Fatty acids are named based on the number of carbon atoms and carbon-carbon double bonds in the chain. ... This bond could bind a molecule of hydrogen, forming a 16-carbon molecule with no carbon-carbon double bonds.
Explanation:
Fatty acids are the fundamental blocks of fat in our bodies and our meals.
Fatty acids are carboxylic acids with long aliphatic chains that can be branched or unbranched in biochemistry. Natural fatty acids have an even number of carbon atoms and are usually unbranched. Fatty acids are important components of lipids.
They exist as esters in three different forms:
PhospholipidsTriglyceridesCholesteryl estersFatty acids that are vital to our bodies but cannot be produced in sufficient quantities within our cells are obtained from dietary sources. They are referred to as essential fatty acids. Linoleic acid and alpha-linoleic acid are two examples.
Fatty acids serve as energy sources as well as membrane constituents. They are involved in signaling, cell metabolism, and energy storage in adipose tissues.
To know more about Fatty acids,
brainly.com/question/29593274
Which of the following is a common sign that a chemical change has occurred?
Answer:
C a chemical has become a different color
Explanation:
is it a chemical change when water turns to ice? or to water vapor? no because it can easily change back.
it's not A obviously
I just explained why it's not B
and again it's obviously not D
It's C because once you change the color of something you can most likely not change it back (cake batter, stained glass) making it a chemical change
Find the density of a liquid that has a mass of 24 grams and a volume of 6 ml.
Answer:
4
Explanation:
24/6 is 4.
Answer:
Mathematically: D = m/v. If you know what liquid you have, you can look up its density in a table. Once you know that, all you have to do to find the mass of the liquid is to measure its volume. Once you know density and volume, calculate mass using this relationship: mass = density • volume.
Explanation:
How many Iron (Fe) atoms should be on the products side for the equation below to obey the Law of Conversation of Mass? 25 points
2
4
1
3
Answer:
infinite
Explanation:
help pls
Which process of sedimentary rock formation occurs last?
cementation
compaction
deposition
erosion
Answer:
Compaction.
Explanation:
All the others are before this.
15
Density of Metals at Room Temperature
Density
Name of Metal
(g/mL)
Nickel
8.90
Copper
8.96
Palladium
12.02
smi Wetes
Silver
10.5
Platinum
21.4
Gold
19.32
Refer to the Density of Metals at Room Temperature table above. How is the density of a
metal related to its location on the Periodic Table?
A
As the metal's atomic number increases, the density increases.
B
As the metal's atomic mass increases, the density increases.
С
As the metal's number of valence electrons increases, the density increases.
D
As the metal's number of electron energy levels increases, the density increases.
Answer:
platinum = 21.4 I think it's letter D to be related to it.
I NEED HELP ASAP
Types of Cells
1) I have a cell membrane?
PROKARYOTE
EUKARYOTE *******
BOTH
2)I have a nucleus *
PROKARYOTE*****
EUKARYOTE
BOTH
3)I am a bacteria *
PROKARYOTE
EUKARYOTE
BOTH
1) Both cells have a cell membrane.
2) A nucleus is present in only Eukaryote cells.
3) I'm pretty sure Prokaryote cells are bacteria.
Hope this helps!! :)
Question 1 of 10
What is technology?
A. An understanding of something new.
B. The steps that engineers go through to create a product.
C. Something created using science for use by society.
D. A method that is used to solve problems,
SUBMIT
Answer:
C.
Explanation:
You can use the series of elimination for this. First, you look at A. Technology is not an understanding of something new, so we cross that out. Second, you look at B. Technology isn't a series of steps, so we can mark that one off. Third, you look at C. Technology is something created using science for use by society, so we can keep that in mind. Lastly, we check D. Technology doesn't match up to the definition, so we can cross that one out. The answer that would make the most sense would be D.
Consider the diagram below.
What does C represent?
A) enthalpy of reaction
B) activation energy
C) activated complex
D) energy of the reactants
Answer:
A) enthalpy of reaction
Explanation:
The region C signifies the enthalpy of reaction.
This diagram is the energy profile of an endothermic reaction. In such reaction, heat is absorbed from the surrounding. At the end of the reaction, the heat of product is lesser than that of the reactants.
Enthalpy changes are heat changes accompanying a physical and chemical change. An enthalpy is the difference between the sum of the heat contents of products and sum of the heat contents of reactants.it is indeed A) enthalpy of reaction
According to the following reaction, how many grams of hydrofluoric acid will be formed upon the complete reaction of 25.6 grams of water with excess silicon tetrafluoride?
silicon tetrafluoride (s) + water (l) → hydrofluoric acid (aq) + silicon dioxide (s)
Answer:
56.89 g of HF
Explanation:
We'll begin by writing the balance equation for the reaction. This is illustrated below:
SiF₄ + 2H₂O —> 4HF + SiO₂
Next, we shall determine the mass of H₂O that reacted and the mass of HF produced from the balanced equation.
This is illustrated:
Molar mass of H₂O = (2×1) + 16 = 2 + 16 = 18 g/mol
Mass of H₂O from the balanced equation = 2 × 18 = 36 g
Molar mass of HF = 1 + 19 = 20 g/mol
Mass of HF from the balanced equation = 4 × 20 = 80 g
Summary:
From the balanced equation above,
36 g of H₂O reacted to produce 80 g of HF.
Finally, we shall determine the mass of HF produced from the reaction. This is illustrated below:
From the balanced equation above,
36 g of H₂O reacted to produce 80 g of HF.
Therefore, 25.6 g of H₂O will react to produce = (25.6 × 80)/36 = 56.89 g of HF.
Thus, 56.89 g of HF were produced from the reaction.
Which of the following particles combine to form molecules?
Compounds
Protons
Electrons
Atoms
Answer: i think its protons and electrons but it also might just be atoms because protons and electrons make atoms when there are also neutrons
Explanation:
How did changing from a light drizzle to a downpour affect the river and the sediment un it
Answer:
The velocity of the river increased.
There was more erosion in the stream.
The type of sediment that moved changed.
Explanation:
Answer:
The river increased its slope.
The volume of the river decreased.
The velocity of the river increased.
There was more erosion in the stream.
The type of sediment that moved change
Explanation:
The amount of UVA radiation hitting a surface at sea level in a lightly clouded day is about 70W/m2. About half of that can be absorbed by the skin. A typical carbon- carbon bond requires 348 kJ/mol to break. A person lies on the beach for about 1 hour without sunscreen (i.e. fully exposed to UVA radiation). Estimate the number of C-C bonds broken in this person’s back (about 0.18 m2) over that period. Assume that the average wavelength of UVA is 335 nm.
Answer:
Explanation:
Area of person's back = .18 m²
energy of radiation falling on the back per second
= 70 x .18 J
= 12.6J
Energy absorbed per second = .5 x 12.6 = 6.3 J
energy absorbed per hour = 6.3 x 60 x 60 = 22680 J
energy required to break one mole bond = 348 x 10³ J
energy required to break one bond = 348 x 10³ / 6.02 x 10²³
= 57.8 x 10⁻²⁰ J .
So number of bonds broken in one hour = 22680 / 57.8 x 10⁻²⁰
= .392 x 10²³ bonds .
= 39.2 x 10²⁰ bonds .
Explain what happened to the electrons in the elements when you exposed them to the flame. *please help
Explanation:
When you heat an atom, some of its electrons are "excited* to higher energy levels. When an electron drops from one level to a lower energy level, it emits a quantum of energy. ... The different mix of energy differences for each atom produces different colours. Each metal gives a characteristic flame emission spectrum.
How many hydrogen atoms are there in 1.15 g of methane (CH4)?
36.8 g of CuSO4(s) was added to water to prepare a 2.00 L solution. What is the
concentration of CuSO4 in molarity?Molar mass of CuSO4 = 159.62 g/mol
A. 18.4 M
B. 1.84 M
C. 0.231 M
D. 0.115
Answer:
Option D. 0.115 M
Explanation:
The following data were obtained from the question:
Mass of CuSO4 = 36.8 g
Volume of solution = 2 L
Molar mass of CuSO4 = 159.62 g/mol
Molarity of CuSO4 =..?
Next, we shall determine the number of mole in 36.8 g of CuSO4.
This can be obtained as shown below:
Mass of CuSO4 = 36.8 g
Molar mass of CuSO4 = 159.62 g/mol
Mole of CuSO4 =.?
Mole = mass /Molar mass
Mole of CuSO4 = 36.8 / 159.62
Mole of CuSO4 = 0.23 mole
Finally, we shall determine the molarity of the CuSO4 solution as illustrated below:
Mole of CuSO4 = 0.23 mole
Volume of solution = 2 L
Molarity of CuSO4 =..?
Molarity = mole /Volume
Molarity of CuSO4 = 0.23 / 2
Molarity of CuSO4 = 0.115 M
Therefore, the molarity of the CuSO4 solution is 0.115 M.
A 25.00-mL aliquot of a nitric acid solution of unknown concentration is pipetted into a 125-mL Erlenmeyer flask and 2 drops of phenolphthalein are added. The above sodium hydroxide solution (the titrant) is used to titrate the nitric acid solution (the analyte). If 12.75 mL of the titrant is dispensed from a burette in causing a color change of the phenolphthalein, what is the molar concentration of the nitric acid solution? (Show all steps for calculating the answer.)
Answer: 0.0611 M HNO3
Answer:
0.0611M of HNO3
Explanation:
The concentration of the NaOH solution must be 0.1198M
The reaction of NaOH with HNO3 is:
NaOH + HNO3 → NaNO3 + H2O
1 mole of NaOH reacts per mole of HNO3.
That means the moles of NaOH used in the titration are equal to moles of HNO3.
Moles HNO3:
12.75mL = 0.01275L * (0.1198mol / L) = 0.0015274 moles NaOH = Moles HNO3.
In 25.00mL = 0.025L -The volume of the aliquot-:
0.00153 moles HNO3 / 0.025L =
0.0611M of HNO3The number that represents a neutral pH is . (2 points)
Answer:
7
Explanation:
Answer:
7 is your answer
YW! :)
Explanation:
A buffer contains significant amounts of ammonia and ammonium chloride.
Required:
a. Write an equation showing how this buffer neutralizes added aqueous acid (HCl).
b. Write an equation showing how this buffer neutralizes added aqueous acid (KOH).
A buffer system has been the salt solution that has been able to avoid the change in the pH with the addition of acid or base to the solution.
What is the effect of acid and base on buffer?The acid has been comprised of the hydrogen ion, and react with the base with the formation of salt, thereby limit the change in pH.
The addition of acid to the buffer solution has been given as:
[tex]\rm HCl+NH_3\;\leftrightharpoons\;NH_4Cl[/tex]
The base addition to the buffer reacts with the acid part of the buffer and forms salts to resist the change in pH.
The addition of the base, KOH to the buffer solution has been given as:
[tex]\rm KOH+NH_4^+\;\leftrightharpoons\;K^+\;+\;NH_3\;+\;H_2O[/tex]
Learn more about buffers, here:
https://brainly.com/question/24188850
Which particle is negatively charged?
A. proton
B. atom
C. neutron
D. electron
Answer:
D. electron
Explanation:
Electrons have a negative charge
In carbon dioxide (CO2), there are two oxygen atoms for each carbon atom. Each oxygen atom forms a double bond with carbon, so the molecule is formed by two double bonds.
Two double bonds means that the total number of electrons being shared in the molecule is
Answer:
The Answer is eight.
Explanation:
Sorry if it's too late and it doesn't help! But I hope you have a magnificent day! :3
Answer:
8
Explanation:
I had this question on my quiz and got it right.
What stress causes this type of fault to form? O compression O gravity O tension O shearing
Answer: It’s D
Explanation:
Cuz I said so
Answer: d. Shearing
Explanation:
) What would be the effect on the molarity of the NaOH solution if some of the water evaporated from the Florence flask after the NaOH solution was standardized with the KHP
Answer:
The effect is the increasing of the molar concentration.
Explanation:
When you standarize a solution of NaOH with KHP you are establish its molar concentration (That is the amount of moles of NaOH per liter of solution).
If you evaporated some water of the solution, you are increasing its concentration because volume is decreasing doing the amount of moles per liter increasing.
Nerve Impulses ____.
A. start at the dendrite.
B. are electrical signals.
C. can travel backwards and forwards.
D. are only found in the autonomic nervous system.
Answer:
B. are electrical signals.
A solution of 400mg of optically active 2-butanol in 10 mL of water, placed in a 20 cm cell shows an optical rotation of 40o. What is the specific rotation of this compound?
Answer:
Specififc rotation [∝] = 0.5° mL/g.dm
Explanation:
Given that:
mass = 400 mg
volume = 10 mL
For a solution,
The Concentration = mass/volume
Concentration = 400/10
Concentration = 40 g/mL
The path length l = 20 cm = 2 dm
Observed rotation [∝] = + 40°
Specififc rotation [∝] = ∝/l × c
where;
l = path length
c = concentration
Specififc rotation [∝] = (40 / 2 × 40)
Specififc rotation [∝] = 0.5° mL/g.dm
Using the specific rotation formular, the specific rotation obtained for the compound ls 5°
Given the Parameters :
Observed rotation, [tex] \alpha = 40° [/tex] Path length, l = 20 cm = 2 dmConcentration, C
Concentration = mass × volume
Mass = 400 mg = 400 /1000 = 0.4g
Volume = 10 mL
Concentration = 0.4g × 10 mL = 4g/mL
The specific rotation formular, [tex] [\alpha] [/tex] is given by :
[tex] [\alpha] = \frac{\alpha_{observed}}{C \times l} [/tex]
[tex] [\alpha] = \frac{40°}{4 \times 2} = \frac{40°}{8} = 5° [/tex]
Therefore, the specific rotation of the compound ls 5°
Learn more :https://brainly.com/question/5963685?referrer=searchResults
Fossils in the gobi desert helped scientists learn?
Answer:
dinosaurs laid eggs,sabretooths were carnivores, bats lived millions of years ago ,fossils of cynobacteria exist?
Explanation:
