Since spring started, Kareem has been surveying the growth of leaves on his neighborhood trees. He goes out every day and computes the average number of leaves on a sample of trees. He created a scatter plot where the y-axis represents the average number of leaves on the trees, and the x-axis represents the number of weeks since spring started. Use the 2 given points to write a linear equation that can be used to approximate the data distribution.

A. Y=3x+2000
B. Y=4700x+1500
C. Y=x+1700
D. Y=1566. 67x+1716. 67

Based on the equation you created, what would be the expected average number of leaves on a tree 8 weeks after spring has started?​

The trip will take another 1 hour to complete.

If a trip from Boston to the White Mountains of New Hampshire takes 2 3/4 hours, and you have already traveled 1/11 of the way, then the remaining distance is:

1 - 1/11 = 10/11 of the total distance.

To find how much longer the trip will take, we can use the proportion:

time taken for 10/11 of the trip = x (time taken for the whole trip)

distance traveled for 10/11 of the trip = 1 - 1/11 = 10/11 of the total distance

Since the time taken is proportional to the distance traveled, we can set up the following equation:

2 3/4 hours / (1 - 1/11) = x

where x is the time it will take for the whole trip.

Simplifying the left side of the equation, we get:

2 3/4 hours / (10/11) = x

Multiplying both sides by (11/10), we get:

x = (2 3/4 hours) × (11/10) = 3 1/4 hours

Therefore, the remaining time to complete the trip is:

3 1/4 hours - 2 3/4 hours = 1 hour

So the trip will take another 1 hour to complete.

To learn more about hour, click here:

https://brainly.com/question/3164396

#SPJ11

Step-by-step explanation:

remember the original trigonometric triangle inside the norm circle (radius = 1).

sine is the up/down distance from the triangle baseline or corresponding circle diameter.

cosine is the left/right distance from the center of the circle (and the point of the angle).

for larger triangles and circles all these function results need to be multiplied by the actual radius (which we skipped for the norm circle, as a multiplication by 1 is not changing anything).

when you look at the triangle with K representing the angle, we have 10 a the cosine value, 24 as the sine value and 26 as the radius.

so,

10 = cos(K) × 26

cos(K) = 10/26 = 5/13

The only critical point of f(x) is x = -2.

a) To find the derivative of f(x), we can use the chain rule and the power rule of differentiation.

f(x) = 3sqrt(x + 2)^2

f'(x) = 3 * 2 * sqrt(x + 2) * (x + 2)^1/2-1 * (1)

Applying the power rule, we simplify the expression as:

f'(x) = 6(x + 2)^1/2

Therefore, the derivative of f(x) is f'(x) = 6(x + 2)^1/2.

b) To solve f'(x) = 0, we set f'(x) equal to zero and solve for x:

f'(x) = 6(x + 2)^1/2 = 0

Dividing both sides by 6, we get:

(x + 2)^1/2 = 0

Squaring both sides, we get:

x + 2 = 0

Subtracting 2 from both sides, we get:

x = -2

Therefore, the only critical point of f(x) is x = -2.

To learn more about critical point visit: https://brainly.com/question/31017064

#SPJ11

Answer:

There is an outlier at 28.

Answer:

[tex]y=-\dfrac{8}{x}[/tex]

Step-by-step explanation:

Inverse proportions can be represented by an equation in the form:

[tex]\boxed{y=\dfrac{k}{x}}[/tex]

where:

To write an expression for the graphed function, first input the given point (-2, 4) into the inverse proportion equation and solve for k:

[tex]\implies y=\dfrac{k}{x}[/tex]

[tex]\implies 4=\dfrac{k}{-2}[/tex]

[tex]\implies 4 \cdot (-2)=\dfrac{k}{-2}\cdot (-2)[/tex]

[tex]\implies -8=k[/tex]

[tex]\implies k=-8[/tex]

Therefore, the expression for the graphed function is:

[tex]\boxed{y=-\dfrac{8}{x}}[/tex]

The advertisement generates the maximum rate of growth of car sales on the first day.

The rate of growth of sales is given by the derivative of N(t) with respect to time t:

dN/dt = 72t

To find the day when the maximum rate of growth of sales occurs, we need to find the value of t that maximizes this expression.

Setting dN/dt = 0, we get:

72t = 0

t = 0

However, since we are interested in finding the day when the maximum rate of growth of sales occurs, we need to consider the second derivative of N(t):

d2N/dt2 = 72

Since this is a positive constant, it tells us that N(t) is a convex function and has a minimum value at t = 0. Therefore, the maximum rate of growth of sales occurs on the day when t = 0, which corresponds to the first day of the advertisement.

Answer: 1. on day 12

Learn more about maximum growth rate.

brainly.com/question/29217326

#SPJ11

Answer:

64

Step-by-step explanation:

Answer:

64...i think

Step-by-step explanation:

125 - 88=37

88-64=24

PLS MARK BRAINLIEST

The correct answer is D. 29.50.

To find the wingspan of the actual airplane, we will use the given scale factor and the wingspan of the model airplane.
Given information:
Model airplane wingspan = 11.8 inches
Scale factor = 1 inch to 2.5 feet

Step 1: Convert the model wingspan to feet using the scale factor.
1 inch on the model represents 2.5 feet on the actual airplane. To convert 11.8 inches to feet, multiply by the scale factor.
Step 2: Calculate the actual wingspan.
Actual wingspan = Model wingspan * Scale factor
Actual wingspan = 11.8 inches * 2.5 feet/inch

Step 3: Perform the multiplication.
Actual wingspan = 29.5 feet
So, the wingspan of the actual airplane is 29.5 feet.

You can read more about scale factor at https://brainly.com/question/25722260

#SPJ11

The slope of the curve y = x^3 at point P(2, 8) is 12.

To find the slope of the curve y = x^3 at point P with coordinates (2, 8), we need to determine the derivative of the function and then evaluate it at x = 2.

Step 1: Find the derivative of the function y = x^3.
The derivative, dy/dx, represents the slope of the curve. To find the derivative of y = x^3, apply the power rule: d(x^n)/dx = n * x^(n-1).
So, dy/dx = 3 * x^(3-1) = 3x^2.

Step 2: Evaluate the derivative at the given point P (2, 8).
To find the slope at point P, substitute the x-coordinate (2) into the derivative: 3 * (2)^2 = 3 * 4 = 12.

Thus, the slope of the curve y = x^3 at point P(2, 8) is 12.

To learn more about derivative

https://brainly.com/question/30466081

#SPJ11

The surface area of the right rectangular prism is 880 cm².

Given Top and bottom measurements of the rectangular prism = 15 cm and 11 cm

The front and back measurements of the rectangular prism = 11cm and 11cm

The two sides measurements of the rectangular prism = 11 cm and 14 cm

To find the surface area of the rectangular prism, we have to substitute the above values in the below equation,

Surface area = (top*bottom) + (front*back) + (sides)

Surface area = (15 cm * 11 cm) + (11 cm * 11 cm) + (11 cm * 14 cm)

Surface area = 330 cm² + 242 cm²  + 308 cm²  

Surface area = 880cm²

To know more about rectangular prism,

https://brainly.com/question/30337697

#SPJ1

After drawing our frequency table, we also find out that our mean is 6.73.

To make a frequency table, we have to count the number of times each value appears in the data set.

Frequency table:

Value       Frequency

5              4

6              8

7              4

8              6

9              3

To find the mean, we will add all values and divide by total number of values. The mean is:

= EF / N

= (6 + 7 + 6 + 6 + 7 + 6 + 5 + 8 + 6 + 5 + 9 + 8 + 5 + 6 + 8 + 9 + 5 + 8 + 8 + 6 + 8 + 7 + 5 + 6 + 9 + 7 + 7 + 9 + 6 + 7) / 30

= 6.83333333333

= 6.83.

Read more about frequency table

brainly.com/question/27820465

#SPJ4

Answer:

Set your calculator to degree mode.

Use the Law of Cosines.

x^2 = 18^2 + 15^2 - 2(18)(15)(cos 105°)

x^2 = 688.7623

x = 26.2 cm

Each number is classified according to its value in the given image.

We are given some numbers and we have to drag each number to the correct location according to its value. The numbers given are 4.2×[tex]10^{-6}[/tex], 2.1×[tex]10^{-3}[/tex],  3.1×[tex]10^{-2}[/tex], 3.2×[tex]10^{-5}[/tex], 3.5×[tex]10^{-4}[/tex], 5.8×[tex]10^{-3}[/tex], 5.2×[tex]10^{-4}[/tex].

We will classify these numbers in the categories given in the table.

(a) Now the numbers which are greater than 3.1×[tex]10^{-3}[/tex] are:

3.1×[tex]10^{-2}[/tex] and  5.8×[tex]10^{-3}[/tex].

(b) Numbers falling between 3.1 × [tex]10^{-3}[/tex]  and 4.3 × [tex]10^{-5}[/tex] are:

2.1×[tex]10^{-3}[/tex], 3.5×[tex]10^{-4}[/tex], and 5.2×[tex]10^{-4}[/tex]

(c) Numbers that are less than 4.3 × [tex]10^{-5}[/tex] are:

4.2×[tex]10^{-6}[/tex]and 3.2×[tex]10^{-5}[/tex]

So, the numbers are classified according to their values in the table given in the image.

To learn more about classifying numbers;

https://brainly.com/question/13029444

#SPJ4

In the △ABC, the  the difference between bc and ab if ad = 1 is found to be 0.709.

We can use the angle bisector theorem to solve this problem. Let's denote the length of segment BD as x and the length of segment CD as y. Then, we can write,

BD/DC = AB/AC

Using the angle bisector theorem, we know that AB/AC = BD/DC, so we can substitute to get,

x/y = AB/AC

We can solve for AB by multiplying both sides by AC,

AB = x/y * AC

Now, we can use the law of sines to find the length of AC. We have,

sin(20°)/AB = sin(140°)/AC

Solving for AC, we get,

AC = AB * sin(20°) / sin(140°)

Substituting the expression we found for AB, we get,

AC = x/yACsin(20°) / sin(140°)

Simplifying, we get,

y = xsin(140°) / (sin(20°) - sin(140°))

We know that AD = 1, so we can use the Pythagorean theorem to find BC:

BC² = BD² + CD²

Substituting the expressions we found for BD and CD, we get,

BC² = x² + y²

Substituting the expression we found for y, we get,

BC² = x² + (xsin(140°) / (sin(20°) - sin(140°)))²

Simplifying, we get,

BC² = x²(1+sin²(140°)/(sin²(20°)-2sin(20°)sin(140°)+sin²(140°)))

Using the identity sin(140°) = sin(180° - 40°) = sin(40°), we can simplify further.

Now, we can substitute x = AD = 1 and sing a calculator, we can evaluate this expression to get,

BC² ≈ 2.917

Taking the square root, we get,

BC ≈ 1.709

Therefore, the difference between BC and AB is 0.709.

To know more about angle bisector theorem, visit,

https://brainly.com/question/9742008

#SPJ4

Answer:true

Step-by-step explanation:

Answer:

true

Step-by-step explanation

Answer:

Domain is all x values

Range is all y values

Step-by-step explanation:

Your image is not clear enough for me to see the x or y coordinates so hope that helps you to figure it out on your own

The majority of logs in the pile will have a weight close to the mean of 17 pounds, with a smaller number of logs having a weight that is farther away from the mean.

In statistics, the normal distribution is a commonly used continuous probability distribution.

It is also referred to as a Gaussian distribution, and it has a bell-shaped curve that is symmetrical around the mean.

The mean is the center of the distribution, and the standard deviation describes how spread out the data is around the mean.

In this case, the weights of logs in a wood pile are normally distributed with a mean of 17 pounds and a standard deviation of 3.4 pounds.

This means that the majority of logs in the pile will have a weight close to the mean of 17 pounds, with a smaller number of logs having a weight that is farther away from the mean.

To know more about Gaussian distribution, refer here:

https://brainly.com/question/13390425#

#SPJ11

The final temperature after the next 8 hours (6 hours at -0.8°C per hour, followed by 2 hours at -0.8°C per hour) will be -2.4°C.

The final temperature can be calculated by subtracting the total temperature change from the initial temperature of 4°C.

The total temperature change during the next six hours can be calculated by multiplying the mean rate of -0.8°C per hour by the number of hours, which is 6.

-0.8°C/hour x 6 hours = -4.8°C

Therefore, the temperature after the next six hours will be:

4°C - 4.8°C = -0.8°C

For the next two hours, the temperature changed at a mean rate of -0.8°C per hour. This means the temperature decreased by:

-0.8°C/hour x 2 hours = -1.6°C

So the final temperature will be:

-0.8°C - 1.6°C = -2.4°C.

Therefore, the final temperature after the next 8 hours (6 hours at -0.8°C per hour, followed by 2 hours at -0.8°C per hour) will be -2.4°C.

To learn more about temperature, refer below:

https://brainly.com/question/11464844

#SPJ11

The total revenue over the two days is GH¢305.

We can represent the number of items sold and the cost for each item in matrices as follows:

[tex]\begin{equation}A = \begin{bmatrix} 3 & 4 & 1 \ 4 & 2 & 3 \end{bmatrix}, \quad B = \begin{bmatrix} 10 \ 15 \ 20 \end{bmatrix}\end{equation}[/tex]

Here, matrix A represents the number of items sold on each day, and matrix B represents the cost per item. To find the total revenue, we need to multiply the two matrices and then take the sum of all the elements in the resulting matrix:

[tex]\begin{equation}A \cdot B = \begin{bmatrix} 3 & 4 & 1 \ 4 & 2 & 3 \end{bmatrix} \cdot \begin{bmatrix} 10 \ 15 \ 20 \end{bmatrix} = \begin{bmatrix} 95 \ 140 \end{bmatrix}\end{equation}[/tex]

Therefore, the total revenue over the two days is GH¢(95 + 140) = GH¢305.

For more questions like Matrix click the link below:

https://brainly.com/question/28180105

#SPJ11

Answer:

52.5

Step-by-step explanation:

First, we can see that the base is 14m. The top is 7m, and the height is 5m. Since the formula for a trapezoid is

top + base / 2 ∙ h,

we plug in our numbers to get

7 + 14 / 2 ∙ 5.

We can solve to get

21 / 2 ∙ 5

10.5 ∙ 5

52.5

Step-by-step explanation:

f(x)  =  2x^2 -12x + 16       to get to vertex form you will need to complete the square for 'x'....to do THAT you will need the x^2 coefficient to be '1'

Start like this:

2 (x^2 - 6x)    + 16        now complete the square

2 (x^2 - 6x +9)  - 18    + 16

f(x) =  2 (x-3)^2  - 2        Done.

Option A The diameter and circumference of a circle have a proportional relationship is True .

Diameter

The diameter is the length acrοss the circle at its widest pοint, measured frοm center tο center . The radius, a related measurement, is a line that extends frοm the circle's centre tο its edge. The diameter is equivalent tο twice the radius. (A chοrd is a line that crοsses the circle but is nοt at the widest pοint.)

Circumference

The circle's perimeter, οr the distance arοund it, is knοwn as its circumference. Imagine encircling a circle with a string. Imagine taking the string οut and extending it in a straight line. This string's length, if measured, wοuld represent yοur circle's circumference.

Learn more about Diameter

https://brainly.com/question/5501950

#SPJ!

The quotient is -58x2 + 131x - 234 with a remainder of -5898.To solve this problem, we need to use long division. The dividend is 223 + 3x2 + 5x - 4 and the divisor is 22 + 2 + 1, which simplifies to 25.

We start by dividing 2 into 22, which gives us 11. We then write 11 above the 2 and multiply it by 25, which gives us 275. We subtract 275 from 223, which gives us -52. We bring down the 3, which gives us -523. We then repeat the process by dividing 2 into 52, which gives us 26. We write 26 above the 5 and multiply it by 25, which gives us 650. We subtract 650 from -523, which gives us -1173. We bring down the 1, which gives us -11731. We divide 2 into 117, which gives us 58.

We write 58 above the x and multiply it by 25, which gives us 1450. We subtract 1450 from -1173, which gives us -2623. We bring down the -4, which gives us -26234. We divide 2 into 262, which gives us 131. We write 131 above the 5 and multiply it by 25, which gives us 3275. We subtract 3275 from -2623, which gives us -5898. Therefore, the quotient is -58x2 + 131x - 234 with a remainder of -5898.

To know more about quotient  click here

brainly.com/question/24367754

#SPJ11

Answer:36

Step-by-step explanation:

3 a minute
18 in 6 minutes
36 in 12
3:1

The seconds, is it between the time plunk passes Ms. q and the time that plunk finishes the race is 7.5 seconds..

Flow Distance In the Mathematics or Quants part of any competitive test, time is one of the most well-liked and significant topics. For inquiries about a variety of subjects, including motion in a straight line, circular motion, boats and streams, races, clocks, etc.

The notion of Speed, Time, and Distance is frequently employed. Candidates should make an effort to comprehend how the variables of speed, distance, and time interact.

Ms. q being slow will get a head start for the race so,

3 second head start = 3 x 5 = 15 meters

There difference in speed is 8- 5 = 3 m/s          

Time required for the Plunk to catch up to Ms. q is:

15 / 3 = 5 seconds when P catches Q  

(this is 8 seconds after Q starts the race)

In 5 seconds Plunk runs   5 x 8 = 40 meters   this is when they are at the same point that is at time 8 seconds.

60 meters left in the race will take  Plunk :

60 m / 8 m/s = 7.5 seconds to finish the race.

Learn more about Race problems:

https://brainly.com/question/17295866

#SPJ4

The magnitude of vector v is:
|v| = 7

The magnitude of v is simply the length of the vector v, which can be found using the Pythagorean theorem. The vector v is given as v = 7i.

To find the magnitude of v (|v|), use the formula:
|v| = √(x² + y²)

where x and y are the components of the vector v. In this case, x = 7 (from 7i) and y = 0 (since there is no j component).

Now, plug in the values of x and y into the formula:
|v| = √(7² + 0²)
|v| = √(49 + 0)
|v| = √(49)
|v| = 7

Learn more about Pythagorean theorem.

brainly.com/question/14930619

#SPJ11

The correct responses are: "Triangle DBC is similar to triangle ABC" and "The length of side DE is 13."

Since triangle ABC is similar to triangle DBE, we know that the corresponding angles are congruent and the corresponding sides are proportional.

From the given information, we know that side BC of triangle ABC corresponds to side BE of triangle DBE, since they share vertex B. Therefore, we can use the proportion:

BC / BE = AC / DE

Substituting the given values, we have:

BC / 5 = 7.5 / 13

Solving for BC, we get:

BC = (5 x 7.5) / 13 = 2.88 (rounded to two decimal places)

Therefore, the length of side BC is 2.88.

Now we can check which of the given statements are true:

"The length of side AB is 3.75." We do not have enough information to determine the length of side AB, so this statement cannot be determined to be true or false based on the given information.

"Triangle DBC is similar to triangle ABC." This statement is true, since they share angle B and the sides BC and BE are proportional.

"Angle C in triangle ABC is congruent to angle D in triangle DBE." This statement cannot be determined to be true or false based on the given information, since we do not know which angle in triangle DBE corresponds to angle C in triangle ABC.

"The length of side AC is 4.29." This statement cannot be determined to be true or false based on the given information, since we only have information about side BC and side BE. We do not have enough information to determine the length of side AC.

"The length of side DE is 7.8." This statement is false, since the length of side DE is given as 13, not 7.8.

To learn more about Triangle here:

https://brainly.com/question/14926756

#SPJ4

Therefore, there are 13 possible triangles that can be formed with sides of 7cm, 18cm and a whole number as the third side.

Using the triangle inequality law, Let's denote the sides of the triangle as a, b, and c. In this case, we have:

a = 7 cm

b = 18 cm

c = the third side, a whole number

Now, we apply the triangle inequality theorem to these sides:

a + b > c

=> 7 + 18 > c

=> 25 > c

a + c > b

=> 7 + c > 18

=> c > 11

b + c > a

=> 18 + c > 7

=> c > -11

Since c is a whole number, the third condition is always true, as there are no negative whole numbers. Therefore, we only need to consider the first two conditions:

11 < c < 25

Now, we list the whole numbers that fall within 11 and 25 within this range:

these are listed and counted

12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24

There are 13 whole numbers in this range. So, there are 13 possible triangles with sides of 7 cm and 18 cm, and a third side that is a whole number.

Read more on triangles herehttps://brainly.com/question/17335144

#SPJ4

To construct a square and a regular pentagon with equal side lengths of 0.5 inch, we need to use basic geometric constructions.

To construct a square and a regular pentagon with equal side length of 0.5 inch, follow these steps:

(a) Construct a Square:

Connect the endpoints of the four line segments to form a square.

(b) Construct a Regular Pentagon:

Repeat this process for all five vertices of the circle to form the regular pentagon.

A geometric construction is a method of drawing a figure using only a straightedge (an unmarked ruler) and a compass.

For the square, we start by drawing a horizontal line segment of length 0.5 inch. We then draw two perpendicular lines of length 0.5 inch each, meeting at the endpoints of the original line segment.

These two new line segments represent the adjacent sides of the square. We then repeat this process to create the remaining two sides of the square, and connect all four endpoints to form the complete square.

For the regular pentagon, we need to construct a circle with a radius of 0.5 inch. This will be the circumcircle of the pentagon, meaning that all five vertices of the pentagon will lie on the circle.

We draw a horizontal line through the center of the circle, and mark the points where the line intersects the circle. These five points will be the vertices of the pentagon.

We then draw line segments connecting adjacent vertices, using a compass to copy the length of each line segment from the previous one.

This process will create all five sides of the pentagon, and the figure will be a regular pentagon with equal side lengths of 0.5 inch.

Learn more about regular Pentagon

brainly.com/question/929013

#SPJ11

Answer:

see explanation

Step-by-step explanation:

the arc BX is equal to the measure of the central angle BCX

the measure of the inscribed angle BNX is half the measure of its intercepted arc BX