The predicted phenotypic outcome of this cross will be that 75% of the offspring will have a round phenotype, while 25% will have a wrinkled phenotype.
To predict the phenotypic and genotypic outcome of a cross between two plants heterozygous for round peas, we need to first understand the genetics involved.
Round peas are dominant over wrinkled peas, which means that the genotype for round peas can be either homozygous dominant (RR) or heterozygous (Rr), while the genotype for wrinkled peas is homozygous recessive (rr).
When two plants heterozygous for round peas are crossed (Rr x Rr), there are three possible genotypic outcomes for their offspring: RR, Rr, or rr. However, because round peas are dominant, any offspring with at least one R allele (RR or Rr) will have a round phenotype.
Therefore, the predicted phenotypic outcome of this cross will be that 75% of the offspring will have a round phenotype, while 25% will have a wrinkled phenotype. The predicted genotypic outcome will be that 25% of the offspring will be homozygous dominant (RR), 50% will be heterozygous (Rr), and 25% will be homozygous recessive (rr).
To know more about phenotype, visit:
https://brainly.com/question/20730322#
#SPJ11
The alpha decay of what isotope of what element produces lead-206?.
The alpha decay of the isotope of the element produces lead-206 is the polonium (Po)- 210.
Alpha decay is the process, the alpha particles is the emitted when the heavier nuclei decays into the lighter nuclei. Then the alpha particle released has the charge of the +2 units.
The representation of the alpha decay is as :
[tex]X^{A}{z} }[/tex] ---> Y⁴₂ + α⁴₂
Y⁴₂ = Pb²⁰⁶₈₂
Z - 2 = 82
Z = 84
A - 4 = 206
A = 210
The atomic mass, A = 210
The atomic number, Z = 84
Therefore, the element is the polonium (Po) that has the atomic number is the 84 and the atomic mass is the 210.
To learn more about isotopes here
https://brainly.com/question/787643
#SPJ4
what menat by mechanical energy
Answer:
Mechanical energy is the total amount of kinetic energy and potential energy of an object.
It can also be defined as the energy of an object due to either its motion or position or both.
Hope this helps!
pls like and mark as brainliest!
Answer:
Energy possessed by a machine.
HALIDES 1. Give the definition for oxidation and reduction. (0. 4 pts) 2. If we were to mix a silver nitrate solution with the following halide containing salts, which one would produce a precipitate. CaF2, MgCl2, LiI, NaF, and KBr. (0. 3 pt each) 2. If a student were to add a Br2(aq) solution to an aqueous NaCl solution mixed with mineral oil, what would the expected result be after shaking the mixture
Oxidation is the process in which an atom, ion, or molecule loses one or more electrons, resulting in an increase in its oxidation state. Reduction, on the other hand, is the process in which an atom, an ion, results in a decrease in its oxidation state. And only [tex]KBr[/tex] [tex]CaF_2[/tex] would result in precipitate
These two processes occur simultaneously in a chemical reaction and are referred to as redox reactions. When a halide ion is mixed with a silver nitrate solution, a precipitation reaction may occur if the resulting compound is insoluble in water. [tex]KBr[/tex] [tex]CaF_2[/tex] would result in a precipitate, as they form insoluble compounds with silver ions. [tex]MgCl_2[/tex], [tex]LiI[/tex] and [tex]NaF[/tex] would not result in a precipitate as they form soluble compounds with silver ions.
To know more about Oxidation, here
brainly.com/question/16976470
#SPJ4
--The complete Question is, What is the difference between oxidation and reduction in a chemical reaction?
Which of the following halide-containing salts, when mixed with a silver nitrate solution, would result in a precipitate: CaF2, MgCl2, LiI, NaF, or KBr? --
All else being equal, a reaction with a higher activation energy compared to one with a lower activation energy will:.
All else being equal, a reaction with a higher activation energy will have a slower reaction rate compared to one with a lower activation energy.
Activation energy refers to the minimum amount of energy required for a chemical reaction to occur. The higher the activation energy, the more energy is required to initiate the reaction, and thus the slower the reaction rate.
This is because a higher activation energy means that fewer reactant molecules will have enough energy to overcome the energy barrier and form products. Therefore, reactions with higher activation energies require more energy input to proceed and will typically have a slower reaction rate than those with lower activation energies.
To know more about the Activation energy, here
https://brainly.com/question/29016918
#SPJ4
A) What volume of concentrated nitric acid (15.8 M) is needed to prepare 5.0 L of a 2.5 M solution?
WILLLL GIVE BRAINLIEST!!!
Answer:
0.79 L of concentrated nitric acid is needed to prepare 5.0 L of a 2.5 M solution.
Explanation:
We can use the formula:[tex]M_1V_1 = M_2V_2[/tex]where [tex]M_1[/tex] is the concentration of the concentrated nitric acid, [tex]V_1[/tex] is the volume of concentrated nitric acid needed, [tex]M_2[/tex] is the desired concentration of the final solution, and [tex]V_2[/tex] is the final volume of the solution.Plugging in the given values, we get:[tex](15.8 \text{ M})(V_1) = (2.5 \text{ M})(5.0 \text{ L})[/tex]Solving for [tex]V_1[/tex], we get:[tex]V_1 = \frac{(2.5 \text{ M})(5.0 \text{ L})}{15.8 \text{ M}} \approx 0.79 \text{ L}[/tex]Therefore, approximately 0.79 L of concentrated nitric acid is needed to prepare 5.0 L of a 2.5 M solution.
Answer:
0.79 L
I hope this helps! Cheers ^^
Consider the following acid and bases HCO2H ka = 1. 8 x 10^-4
HOBr Ka = 2. 0 x 10^-9
(C2H5)2NH kb = 1. 3 x 10-3
HONH2 kb = 1. 1 x 10^-8
choose sobstances to create ph = 4 buffer solutions:
select all tha apply
HONH3NO3
HOBr
NaOBr
(C2H5)2NH2Cl
(C2H5)2NH
HCO2H
KHCO2
HONH2
The substances that can create a pH = 4 buffer solution are HCO₂H and KHCO₂.
When modest quantities of acid or base are added to a buffer solution, it resists changes in pH. In order to create a buffer solution, we need to have a weak acid and its conjugate base, or a weak base and its conjugate acid, in roughly equal amounts.
HCO₂H is a weak acid with a pKa of 3.74, and its conjugate base is HCO₂⁻. KHCO₂ is the potassium salt of HCO₂⁻, and it acts as a source of HCO₂⁻ ions, making it a good buffer component.
The other substances listed are not suitable for creating a pH = 4 buffer solution because they either do not have a pKa or pKb near 4, or they are neither a pair of a weak acid and its conjugate base, or a pair of a weak base and its conjugate acid..
To learn more about buffer solution, here
https://brainly.com/question/24262133
#SPJ4
What change in volume results if 50.0 mL of gas is cooled from 48.0 °C to
3°C?
Answer:
-2.6 mL.
Explanation:
To solve this question, we need to use the formula:
V1/T1 = V2/T2
where V1 and T1 are the initial volume and temperature of the gas, and V2 and T2 are the final volume and temperature of the gas. We also need to convert the temperatures from degrees Celsius to kelvins by adding 273.15. Plugging in the given values, we get:
50.0 mL / (48.0 + 273.15) K = V2 / (3 + 273.15) K
Solving for V2, we get:
V2 = 50.0 mL x (3 + 273.15) K / (48.0 + 273.15) K V2 = 47.4 mL
Therefore, the change in volume is:
ΔV = V2 - V1 ΔV = 47.4 mL - 50.0 mL ΔV = -2.6 mL
The negative sign indicates that the volume decreases when the gas is cooled.
The answer is -2.6 mL.
Acids and Bases
Show all your work.
Box final anwers.
Use the given numbering in order.
1. What is the pH if [H+] = 1 x 10 (-3) ?
2. What is the pOH if [OH-] = 1 x 10 (-8) ?
3. What is the pH if [OH-] = 1 x 10 (-13) ?
4. What is the pOH if [H+] = 1 x 10 (-5) ?
5. What is the [H+] if the pH = 3?
6. What is the [OH-] if the pOH = 2 ?
7. What is the [H+] if the pOH = 13?
8. What is the [OH-] if the pH = 4?
9. What is the [OH-] if the [H+] = 1 x 10 (-4) ?
10. What is the [H+] if the [OH-] = 1 x 10 (-2) ?
11. What is the pOH if the pH = 6?
12. What is the pH if the pOH = 12?
13. A solution has a pH = 4. Is it basic, acidic or neutral?
14. A solution has a pOH = 2. Is it basic, acidic or neutral?
15. What is an indicator?
16. What is the an acid and a base according to Bronsted-Lowery?
On Acids and Bases:
381510⁽⁻³⁾ M10⁽⁻²⁾ M10⁽⁻¹³⁾ M10⁽⁻⁴⁾ M1 x 10⁽⁻¹⁰⁾ M1 x 10⁽⁻¹²⁾ M82acidicbasicHow to find pH?1. pH = -log[H⁺] = -log(1 x 10⁽⁻³⁾) = 3
2. pOH = -log[OH⁻] = -log(1 x 10⁽⁻⁸⁾) = 8
3. [H+] = 1 x 10⁽⁻¹⁴⁾/[OH-] = 1 x 10⁽⁻¹⁴⁾/(1 x 10⁽⁻¹³⁾) = 0.1 M
pH = -log[H⁺] = -log(0.1) = 1
4. pOH = -log[OH⁻] = -log(1 x 10⁽⁻⁹⁾) = 9
pH + pOH = 14
pH = 14 - pOH = 14 - 9 = 5
5. [H⁺] = 10^(-pH) = 10⁽⁻³⁾ M
6. [OH⁻] = 10^(-pOH) = 10⁽⁻²⁾ M
7. [H⁺] = 10^(-pOH) = 10⁽⁻¹³⁾ M
8. [OH⁻] = 10^(-pH) = 10⁽⁻⁴⁾ M
9. [OH⁻][H⁺] = 1 x 10⁽⁻¹⁴⁾
[OH⁻] = 1 x 10⁽⁻¹⁴⁾/[H+] = 1 x 10⁽⁻¹⁴⁾)/(1 x 10⁽⁻⁴⁾) = 1 x 10⁽⁻¹⁰⁾ M
10. [H⁺][OH⁻] = 1 x 10⁽⁻¹⁴⁾
[H⁺] = 1 x 10⁽⁻¹⁴⁾/[OH-] = 1 x 10⁽⁻¹⁴⁾/(1 x 10⁽⁻²⁾) = 1 x 10⁽⁻¹²⁾ M
11. pH + pOH = 14
pOH = 14 - pH = 14 - 6 = 8
12. pH + pOH = 14
pH = 14 - pOH = 14 - 12 = 2
13. pH < 7, so the solution is acidic.
14. pOH < 7, so the solution is basic.
15. An indicator is a substance that changes color depending on the pH of the solution.
16. According to the Bronsted-Lowery theory, an acid is a substance that donates a proton (H⁺) and a base is a substance that accepts a proton (H⁺).
Find out more on Acids and Bases here: https://brainly.com/question/9836972
#SPJ1
1. a balloon
is filled with hydrogen at a temperature of 22.0°c and a pressure of
$12 mm hg. if the balloon's original volume was 1.25 liters, what will its new
volume be at a higher altitude, where the pressure is only 625 mm hg? assume
the temperature stays the same.
The new volume of the hydrogen-filled balloon at a higher altitude with a pressure of 625 mm Hg will be 6.25 L.
To solve this problem, we can use the gas law equation, which is P1V1 = P2V2, where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.
Given the initial pressure P1 = 112 mm Hg, the initial volume V1 = 1.25 L, and the final pressure P2 = 625 mm Hg, we can calculate the final volume V2 by rearranging the equation:
V2 = (P1V1) / P2
V2 = (112 mm Hg × 1.25 L) / 625 mm Hg
V2 = 6.25 L
So, the new volume of the balloon at a higher altitude will be 6.25 liters, assuming the temperature remains constant at 22.0°C.
To know more about gas law click on below link:
https://brainly.com/question/30458409#
#SPJ11
You are placed in charge of building a brand new city in america. your fellow city planners do not want to use coal or gas to power the city. would you choose to use fission nuclear reactors or fusion nuclear reactors? what is your reasoning?
will give brainliest
In building a brand new city in America without using coal or gas, I would choose to use fission nuclear reactors over fusion nuclear reactors.
The reason behind choosing fission nuclear reactors is that they are currently more developed and widely used in practice than fusion nuclear reactors.
Fission reactors have proven their efficiency and safety in generating power for decades.
Fusion nuclear reactors, while having the potential for greater energy output and fewer radioactive waste issues, are still in the experimental stage and not yet commercially viable.
As a city planner, it's crucial to prioritize reliable and established energy sources for the city's needs. Therefore, using fission nuclear reactors would be a more feasible and practical choice for powering a new city in America.
To know more about nuclear fission visit:
https://brainly.com/question/29541275
#SPJ11
Silver tarnishes in presence of hydrogen sulphide and oxygen because of the reaction 4Ag + 2 H2S + O2 → 2 Ag2S + 2 H2O How much Ag2S is obtained from a mixture of 0. 950 g Ag, 0. 140 g of H2S and 0. 08000 g O2
According to the question the mass of Ag₂S produced is 0.063 g.
What is mass?Mass is a measure of the amount of matter an object contains. It is usually measured in kilograms and grams, and is an important concept in physics and chemistry. Mass is related to other properties such as weight, density, and momentum. Mass can be determined either by measuring the object's weight in a gravitational field or by measuring its inertia, which is its resistance to acceleration caused by a force.
The amount of Ag₂S produced can be calculated using the molar ratio of the reactants and products in the equation: 4Ag + 2 H₂S + O2 → 2 Ag₂S + 2 H₂O
First, calculate the amount of each reactant in moles:
Ag: 0.950 g / 107.87 g/mol = 0.00877 mol
H₂S: 0.140 g / 34.08 g/mol = 0.0041 mol
O2: 0.08000 g / 32.00 g/mol = 0.0025 mol
Then, use the molar ratio to calculate the amount of Ag2S produced:
2 Ag₂S = 0.00877 mol x (2 mol Ag₂S/4 mol Ag) = 0.0044 mol
Therefore, the mass of Ag₂S produced is 0.0044 mol x 143.7 g/mol = 0.063 g.
To learn more about mass
https://brainly.com/question/837939
#SPJ4
The mass of [tex]Ag_2S[/tex] obtained from the given mixture is 1.015 g.
The given chemical equation shows that 4 moles of Ag react with 2 moles of [tex]H_2S[/tex] and 1 mole of [tex]O_2[/tex] to form 2 moles of [tex]Ag_2S[/tex] and 2 moles of [tex]H_2O[/tex].
To determine the mass of [tex]Ag_2S[/tex] produced, we need to find out the limiting reactant first. The limiting reactant is the reactant that is completely consumed during the reaction and limits the amount of product that can be formed.
We can find the limiting reactant by calculating the amount of product that can be formed from each reactant.
For Ag:
The molar mass of Ag is 107.87 g/mol. The number of moles of Ag present is:
0.950 g / 107.87 g/mol = 0.00880 mol
The amount of [tex]Ag_2S[/tex] that can be formed from 0.00880 mol of Ag is:
0.00880 mol Ag x (2 mol [tex]Ag_2S[/tex] / 4 mol Ag) = 0.00440 mol [tex]Ag_2S[/tex]
For [tex]H_2S[/tex]:
The molar mass of [tex]H_2S[/tex] is 34.08 g/mol. The number of moles of [tex]H_2S[/tex] present is:
0.140 g / 34.08 g/mol = 0.00410 mol
The amount of [tex]Ag_2S[/tex] that can be formed from 0.00410 mol of [tex]H_2S[/tex] is:
0.00410 mol [tex]H_2S[/tex] x (2 mol [tex]Ag_2S[/tex] / 2 mol [tex]H_2S[/tex]) = 0.00410 mol [tex]Ag_2S[/tex]
For [tex]O_2[/tex]:
The molar mass of [tex]O_2[/tex] is 32.00 g/mol. The number of moles of [tex]O_2[/tex] present is:
0.08000 g / 32.00 g/mol = 0.00250 mol
The amount of [tex]Ag_2S[/tex] that can be formed from 0.00250 mol of [tex]O_2[/tex] is:
0.00250 mol [tex]O_2[/tex] x (2 mol [tex]Ag_2S[/tex] / 1 mol O2) = 0.00500 mol [tex]Ag_2S[/tex]
From the above calculations, we can see that the amount of [tex]Ag_2S[/tex] that can be formed from Ag is 0.00440 mol, from [tex]H_2S[/tex] is 0.00410 mol, and from [tex]O_2[/tex] is 0.00500 mol.
Since the smallest amount of [tex]Ag_2S[/tex] that can be formed is from [tex]H_2S[/tex], it is the limiting reactant. Therefore, the amount of [tex]Ag_2S[/tex] that can be formed is 0.00410 mol.
The molar mass of [tex]Ag_2S[/tex] is 247.80 g/mol. Therefore, the mass of [tex]Ag_2S[/tex] that can be formed is:
0.00410 mol [tex]Ag_2S[/tex] x 247.80 g/mol = 1.015 g [tex]Ag_2S[/tex] (rounded to three significant figures)
To learn more about mass
https://brainly.com/question/19694949
#SPJ4
Complete question:
What is the mass of Ag2S obtained from a mixture of 0.950 g Ag, 0.140 g of H2S, and 0.08000 g O2, according to the reaction 4Ag + 2H2S + O2 → 2Ag2S + 2H2O?
Which bonds are stronger: the bonds formed or the bonds broken?
The strength of bonds formed and broken depends on the specific chemical reaction involved. In some reactions, the bonds formed are stronger than the bonds broken, while in other reactions, the opposite is true.
When a chemical reaction is exothermic, meaning that it releases energy, the bonds formed are typically stronger than the bonds broken. This is because energy is released when the bonds are formed, indicating that they are more stable and stronger than the bonds that were broken.
On the other hand, in an endothermic reaction, meaning that it absorbs energy, the bonds broken are usually stronger than the bonds formed. This is because energy is required to break the existing bonds, indicating that they are stronger and more stable than the new bonds that are formed.
To know more about chemical reaction, refer here:
https://brainly.com/question/29762834#
#SPJ11
The acid dissociation constant (Ka) for benzoic acid is 6. 3 × 10 ^-5. Find the pH of a 0. 35 m solution of benzoic acid.
The equation for the dissociation of benzoic acid is:
C6H5COOH + H2O ↔ C6H5COO- + H3O+
The expression for Ka is:
Ka = [C6H5COO-][H3O+] / [C6H5COOH]
At equilibrium, the concentration of undissociated benzoic acid will be (0.35 - x), where x is the concentration of dissociated benzoic acid.
Assuming x is small compared to 0.35, we can make the approximation that the concentration of undissociated benzoic acid is 0.35. Therefore, we can write:
Ka = x^2 / (0.35 - x)
Solving for x, we get:
x = √(Ka × (0.35 - x))
x = √(6.3 × 10^-5 × 0.35 - 6.3 × 10^-5 × x)
Squaring both sides:
x^2 = 6.3 × 10^-5 × 0.35 - 6.3 × 10^-5 × x
Bringing all the x terms to one side:
x^2 + 6.3 × 10^-5 × x - 6.3 × 10^-5 × 0.35 = 0
Using the quadratic formula:
x = [-6.3 × 10^-5 ± √(6.3 × 10^-5)^2 + 4 × 6.3 × 10^-5 × 0.35] / 2
x = [-6.3 × 10^-5 ± 1.37 × 10^-3] / 2
x = 6.46 × 10^-4 or x = -7.03 × 10^-5
Since the concentration of benzoic acid cannot be negative, we choose the positive root:
x = 6.46 × 10^-4
The concentration of H3O+ ions is equal to x, so the pH of the solution is:
pH = -log[H3O+]
pH = -log(6.46 × 10^-4)
pH = 3.19
Therefore, the pH of a 0.35 m solution of benzoic acid is 3.19.
To know more about dissociation refer here
https://brainly.com/question/28330679#
#SPJ11
In the following acid-base reaction hpo42- is the_____________
In the following acid-base reaction, hpo₄²⁻ is the base.
This can be seen as it accepts a proton (H⁺) from H₂O to form the conjugate acid, H₂PO₄⁻. The other reactant, H₂O, donates the proton, making it the acid in the reaction. It is important to note that in an acid-base reaction, the species that donates a proton is the acid and the species that accepts the proton is the base.
The strength of the acid and base can also be determined by the equilibrium constant of the reaction. The larger the equilibrium constant, the stronger the acid or base. In this particular reaction, hpo₄²⁻ is a weak base, as it only partially accepts the proton from H₂O.
To know more about acid-base reaction click on below link:
https://brainly.com/question/3911136#
#SPJ11
When a person perspires (sweats), the body loses many sodium ions and potassium ions. The evaporation of sweat cools the skin. After a strenuous workout, people often quench their thirst with sports drinks that contain NaCl and KCl. A single 250. -gram serving of one sports drink contains 0. 055 gram of sodium ions
Sports drink helps to ensure that the body has enough sodium to maintain proper hydration levels and to prevent dehydration.
Electrolytes play a crucial role in various bodily functions, including muscle contractions, nerve impulses, and regulating fluid balance. This is important because the movement of ions across cell membranes is what generates electrical signals in the body. When a person perspires, the sweat that is released from their body contains both sodium and potassium ions. These ions are lost through the process of sweating. However, the evaporation of sweat helps to cool the skin.
After a strenuous workout, it is important to replenish the lost electrolytes by drinking sports drinks that contain NaCl (sodium chloride) and KCl (potassium chloride). For example, a single 250-gram serving of one sports drink contains 0.055 grams of sodium ions. This replaces the lost electrolytes and help maintain proper fluid balance in the body.
In conclusion, after a strenuous workout, it is essential to replenish the lost sodium ions and potassium ions to maintain the body's electrolyte balance and ensure proper muscle and nerve function. Thus, Sports drinks containing NaCl and KCl can be an effective way to replace these ions and quench thirst.
The question should be:
When a person perspires (sweats), the body loses many sodium ions and potassium ions. The evaporation of sweat cools the skin. After a strenuous workout, people often quench their thirst with sports drinks that contain NaCl and KCl. A single 250gram serving of one sports drink contains 0. 055 gram of sodium ions. How sports drinks containing NaCl and KCl can be an effective way to replace these ions?
To learn more about electrolytes visit:
https://brainly.com/question/17089766
#SPJ11
Why does the product from the first part of the experiment turn red when sodium hydroxide is added? Select one: Red is the color of blood, and this lab is about testing for blood. The sodium hydroxide is a nucleophile and adds to the aromatic ring, The sodium hydroxide is reacting with one of the other reagents.The dianion can form a resonance-stabilized conjugated ring, which tends to absorb visible light Incorrect
The correct answer is: The dianion can form a resonance-stabilized conjugated ring, which tends to absorb visible light.
The correct answer is: The dianion can form a resonance-stabilized conjugated ring, which tends to absorb visible light.
In the first part of the experiment, the reagents used are benzidine and hydrogen peroxide, which react to form a compound called a dianion. This dianion is initially colorless, but when sodium hydroxide is added, it causes the dianion to undergo a rearrangement that forms a resonance-stabilized conjugated ring. This conjugated ring absorbs visible light in the blue-green range, which causes the solution to appear red. This color change is used as an indicator for the presence of blood in forensic and medical labs because benzidine and its derivatives are known to react with the heme group found in blood to form a similar colored proproductduct.
Visit to know more about conjugated ring:-
https://brainly.com/question/15047805
#SPJ11
ASAP THIS IS DEW ON THE 4/26/2021!!!!!!! HELP
Assessment timer and count
Assessment items
Illustration of water cycle showing land and water body with arrows pointing outward and inward to both land and water body and some numeric labels one, two, three, and four mentioned along with arrows
Illustration of water cycle showing land and water body with arrows pointing outward and inward to both land and water body and some numeric labels one, two, three, and four mentioned along with arrows
Item 8
How do water particles move in a wave?
They move in a circular motion.
They move up and down.
They stay still.
They move forward with the wave
When a wave passes through water, the particles of water move in a circular motion, which is often described as an orbital motion.
The circular motion of water particles is created by the energy of the wave, which causes the water to oscillate up and down or back and forth in the same place.
As the wave moves through the water, the energy is transferred from particle to particle in a circular motion, causing the water to move in a wave pattern that travels outward from its source. This circular motion is why water waves do not carry water particles along with them, but rather simply transfer energy through the water.
This motion is also what creates the phenomena of waves breaking on shorelines, as the circular motion of water particles becomes disrupted by the shallow water and causes the wave to collapse.
To know more about circular motion refer to-
https://brainly.com/question/2285236
#SPJ11
According to regulations, the legal limit for arsenic in drinking water is 0.05 ppm. If you test a sample of 100 grams of drinking water and find 0.0012 grams of arsenic, is this within the legal limit? Show your calculations.
The concentration of arsenic in the water is 12 ppm, which is higher than the legal limit of 0.05 ppm, the sample of drinking water is not within the legal limit for arsenic. Therefore, action needs to be taken to reduce the level of arsenic in the water to make it safe for drinking.
The concentration of arsenic in the water can be calculated as follows:
Concentration (ppm) = (Mass of arsenic / Mass of water) x 1,000,000
In this case, the mass of arsenic is 0.0012 grams and the mass of water is 100 grams. Substituting these values into the formula, we get:
Concentration (ppm) = (0.0012 g / 100 g) x 1,000,000
Concentration (ppm) = 12 ppm
To know more about arsenic, here
brainly.com/question/493434
#SPJ1
2Al(s) + Fe2O3(s) → Al2O3(s) + 2Fe(s) H = -850 J
1. How much energy would be released if 5. 2 moles of aluminum reacted with excess iron (III) oxide?
2. If you started this reaction with 4. 9g of aluminum, how much energy would be produced?
5.2 moles of aluminum reacting with excess iron (III) oxide would release 2210 J of energy and 4.9 g of aluminum reacting with excess iron (III) oxide would produce 38.5 J of energy.
To find out the amount of energy released when 5.2 moles of aluminum reacts with excess iron (III) oxide, we can use the given enthalpy change of the reaction and stoichiometry.
Using the balanced chemical equation,
2Al(s) + Fe₂O₃(s)→Al₂O₃(s) + 2Fe(s)
We can see that 2 moles of aluminum react with 1 mole of Fe₂O₃.
Now, we can calculate the energy released using the given enthalpy change,
ΔH = -850 J/2 moles Al × 5.2 moles Al = -2210 J
Therefore, the amount of energy released would be -2210 J. To calculate the amount of energy produced when 4.9 g of aluminum reacts with excess iron (III) oxide, we can first convert the given mass of aluminum to moles. The molar mass of aluminum is 26.98 g/mol, so the amount of moles of aluminum would be,
4.9 g Al × (1 mol Al / 26.98 g Al) = 0.181 mol Al
0.181 mol Al × (1mole Fe₂O₃/2moles Al)
= 0.0905 mol Fe₂O₃
Finally, we can calculate the energy produced using the given enthalpy change,
ΔH = -850 J/2 moles Al × 0.0905 moles Fe₂O₃ = -38.5 J. Therefore, the amount of energy produced would be -38.5 J.
To know more about energy of a reaction, visit,
https://brainly.com/question/3682966
#SPJ4
Three (3) brine solutions B1, B2, and B3 are mixed. B1 is one-half of this mixture (one-half of mixture mass, not volume). Brine B1 is 2. 5% salt, B2 is 4. 5% salt and B3 is 5. 5% salt. To this mixture is added 35 lbm of dry salt, while 230 lbm of water is evaporated leaving 3200 lbm of 5. 1% brine. Determine the amounts (in lbm) of B1, B2, and B3
The mass of B1 is one-half of the total mass of the mixture before any salt or water is added.The mass of B1 is 1582.5 lbm.
What is mixture ?Mixture is a combination of two or more substances that are not chemically combined. Mixtures can be either homogeneous, meaning the substances are uniformly dispersed, or heterogeneous, meaning the substances are not evenly distributed. Examples of mixtures include sand and water, sugar and water, and salt and pepper.
Since we are given that the total mass of the mixture is 3200 lbm and that 35 lbm of salt will be added, the total mass of the mixture before the salt and water are added is 3165 lbm.Since B2 is 4.5% salt, we can calculate the salt mass of B2 by multiplying 4.5 by the total mass of B2. Thus, the salt mass of B2 is 4.5 * 1582.5 lbm = 7162.5 lbm. Since we are given that 35 lbm of salt will be added, we can calculate the total mass of B2 before the salt and water are added by subtracting 35 lbm from 7162.5 lbm. Thus, the total mass of B2 before the salt and water are added is 7127.5 lbm. e B3 is 5.5% salt, we can calculate the salt mass of B3 by multiplying 5.5.
To learn more about mixture
https://brainly.com/question/24647756
#SPJ4
How much heat is required to warm 400. g of ethanol from 25.0°c to 40.0°c
To calculate the amount of heat required to warm 400 g of ethanol from 25.0°C to 40.0°C, we need to use the following formula:
Q = m * c * ΔT
where Q is the amount of heat required, m is the mass of the substance, c is the specific heat capacity of ethanol, and ΔT is the change in temperature.
The specific heat capacity of ethanol is 2.44 J/(g·°C), and the change in temperature is:
ΔT = 40.0°C - 25.0°C = 15.0°C
Now we can use the formula to calculate the amount of heat required:
Q = 400 g * 2.44 J/(g·°C) * 15.0°C = 18360 J
Therefore, 18,360 J of heat is required to warm 400 g of ethanol from 25.0°C to 40.0°C.
To know more about required refer here
https://brainly.com/question/2929431#
#SPJ11
What is correlation coefficient vs coefficient of determination?
The correlation coefficient and the coefficient of determination are two statistical terms that are often used to measure the relationship between two variables.
The correlation coefficient, also known as Pearson's correlation coefficient (r), is a measure of the strength and direction of the linear relationship between two variables. It ranges from -1 to 1, where -1 indicates a strong negative relationship, 1 indicates a strong positive relationship, and 0 indicates no relationship.
To calculate the correlation coefficient, you will need to find the covariance of the variables, as well as their standard deviations, and then divide the covariance by the product of the standard deviations.
On the other hand, the coefficient of determination (R²) is a measure of how much of the variance in one variable can be explained by the variance in another variable. It is the square of the correlation coefficient and ranges from 0 to 1.
A value of 0 indicates that none of the variance in the dependent variable can be explained by the independent variable, while a value of 1 indicates that 100% of the variance can be explained.
In summary, the correlation coefficient is a measure of the strength and direction of the relationship between two variables, while the coefficient of determination measures the proportion of variance in one variable that can be explained by the other variable.
Both of these coefficients are essential in understanding the relationship between variables and can be used to make predictions in various fields, such as finance, social sciences, and natural sciences.
To know more about correlation coefficient, visit:
https://brainly.com/question/15577278#
#SPJ11
What is the rate of change of total pressure in the vessel during the reaction?.
The rate of change of total pressure in a vessel during a reaction depends on the stoichiometry of the reaction and the behavior of the reactants and products with respect to pressure.
In general, if the reaction involves the production or consumption of gases, the total pressure in the vessel will change as the reaction proceeds. The rate of change of total pressure can be calculated using the ideal gas law, which relates the pressure, volume, and temperature of a gas:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature.
If the number of moles of gas changes during the reaction, the pressure will change accordingly. The rate of change of pressure can be calculated using the following equation:
ΔP/Δt = (Δn/Δt)RT/V
where ΔP/Δt is the rate of change of pressure, Δn/Δt is the rate of change of the number of moles of gas, R is the ideal gas constant, T is the temperature, and V is the volume.
Therefore, to determine the rate of change of total pressure in a vessel during a reaction, it is necessary to know the stoichiometry of the reaction and the behavior of the reactants and products with respect to pressure.
To know more about stoichiometry refer to-
https://brainly.com/question/30215297
#SPJ11
A mixture of 100 mol containing 60 mol % n-pentane and 40 mol% n-heptane is vaporized at 101. 32 kpa abs pressure until 40 mol of vapor and 60 mol of liquid in equilibrium with each other are produced. This occurs in a single-state system, and the vapor and liquid are kept in contact with each other until vaporization is complete.
required:
calculate the composition of the vapor and the liquid
The composition of the vapor and liquid in the mixture containing 60 mol% n-pentane and 40 mol% n-heptane is as follows:
Vapor composition: 75 mol% n-pentane, 25 mol% n-heptane
Liquid composition: 50 mol% n-pentane, 50 mol% n-heptane
1. Calculate the initial moles of each component:
n-pentane: 100 mol * 0.6 = 60 mol
n-heptane: 100 mol * 0.4 = 40 mol
2. Determine the moles of vapor produced:
40 mol vapor = x mol n-pentane + y mol n-heptane
3. Calculate the moles of liquid remaining:
60 mol liquid = (60 - x) mol n-pentane + (40 - y) mol n-heptane
4. Apply the equilibrium condition:
x / (60 - x) = y / (40 - y)
5. Solve the system of equations to find the moles of each component in the vapor and liquid phases:
x = 30 mol n-pentane, y = 10 mol n-heptane
6. Calculate the vapor composition:
n-pentane: 30 mol / 40 mol = 0.75 or 75%
n-heptane: 10 mol / 40 mol = 0.25 or 25%
7. Calculate the liquid composition:
n-pentane: (60 - 30) mol / 60 mol = 0.5 or 50%
n-heptane: (40 - 10) mol / 60 mol = 0.5 or 50%
To know more about equilibrium condition click on below link:
https://brainly.com/question/13764087#
#SPJ11
A 0. 625 g sample of an unknown weak acid (call it HA for short) is dissolved in enough water to make 25. 0 mL of solution. This weak acid solution is then titrated with 0. 100 M NaOH, and 45. 0mL of the NaOH solution is required to reach the equivalence point. Using a pH meter, the pH of the solution at the equivalence point is found to be 8. 25. (a) Determine the molecular mass of the unknown acid. (b) Determine the pKa value of the unknown acid
A 0.625 g sample of unknown weak acid is titrated with 0.1 M NaOH. So, the molecular mass of the unknown acid is 139.0 g/mol. The pKa of the unknown acid is 8.25.
Here are the step by step solutions for the given question:
(a) To determine the molecular mass of the unknown acid, we need to first find the number of moles of NaOH used in the titration. From the concentration and volume of NaOH used, we have:
0.100 mol/L x 0.045 L = 0.0045 mol NaOH
Since the acid and base react in a 1:1 ratio, we know that the number of moles of acid in the sample is also 0.0045 mol. Using the mass of the sample and the number of moles of acid, we can find the molecular mass:
Molecular mass = mass/number of moles = 0.625 g / 0.0045 mol = 139.0 g/mol
Therefore, the molecular mass of the unknown acid is 139.0 g/mol.
(b) At the equivalence point, the number of moles of NaOH added is equal to the number of moles of acid originally present in the sample. Therefore, we can use the concentration of the NaOH solution and the volume of NaOH used to calculate the initial concentration of the acid, [HA]:
0.100 mol/L x 0.045 L = 0.0045 mol NaOH
0.0045 mol NaOH = 0.0045 mol HA
[HA] = 0.0045 mol / 0.025 L = 0.18 mol/L
Next, we can use the Henderson-Hasselbalch equation to find the pKa of the acid:
pKa = pH + log([A-]/[HA])
At the equivalence point, all of the acid has been converted to its conjugate base, so [A-] = [HA]. We can assume that the pH at the equivalence point is equal to the pKa of the acid. Substituting these values into the Henderson-Hasselbalch equation:
8.25 = pKa + log(1)
pKa = 8.25
Therefore, the pKa of the unknown acid is 8.25.
To know more about the equivalence point refer here :
https://brainly.com/question/31671460#
#SPJ11
Given the reaction at equilibrium:
2 SO2(g) + O2(g) ↔ 2 SO3(g) + heat
The rate of the forward reaction can be increased by adding more SO2 because the
A) temperature will increase
B) forward reaction is endothermic
C) reaction will shift to the left
D) number of molecular collisions between reactants will increase
The addition of more [tex]SO2[/tex] to the reaction at equilibrium, [tex]2 SO2(g) + O2(g) ↔ 2 SO3(g) + heat[/tex], will increase the rate of the forward reaction. This is because the forward reaction is an exothermic reaction, meaning it releases heat. The correct answer is option d.
According to Le Chatelier's principle, adding more [tex]SO2[/tex] will shift the equilibrium position to the right and favor the forward reaction, leading to an increase in the concentration of the products, [tex]SO3[/tex].
As the concentration of [tex]SO3[/tex] increases, the rate of the forward reaction will increase due to an increase in the number of molecular collisions between reactants. Therefore, adding more[tex]SO2[/tex] will increase the rate of the forward reaction, favoring the production of [tex]SO3[/tex].
The correct answer is option d.
To know more about Le Chatelier's principle refer to-
https://brainly.com/question/29009512
#SPJ11
Complete the word equation for making a salt. Metal oxide + → salt + water
Answer:
An acid
Explanation:
a metal oxide e.g NaOH +an acid e.g HCl=>salt e.g NaCl+water
14 m3 of gas at a pressure of 3. 0 atmospheres is compressed into a volume of 9. 0 m3. Under what amount of pressure is the sample of gas after the compression?
The amount of pressure on the sample of gas after compression is 4.67 atm.
The initial volume and pressure of the gas are 14 m³ and 3.0 atm, respectively. After the gas is compressed, its volume becomes 9.0 m³. We can use the combined gas law to determine the final pressure of the gas:
[tex]P_1V_1 / T_1 = P_2V_2 / T_2[/tex]
where[tex]P_1, V_1,\ and\ T_1[/tex]are the Initial pressure, volume, and temperature of the gas, respectively, and [tex]P_2, V_2,\ and\ T_2[/tex] are the final pressure, volume, and temperature of the gas, respectively.
Assuming the temperature is constant, we can simplify the equation to:
[tex]P_2 = (P_1 * V_1) / V_2[/tex]
Substituting the given values, we get:
[tex]P_2[/tex] = (3.0 atm * 14 m³) / 9.0 m³
[tex]P_2[/tex]= 4.67 atm
To know more about Initial volume, here
brainly.com/question/2454734
#SPJ4
2HI (g) ⇋ H2 (g) I2 (g) kc = 64 if the equilibrium concentrations of H2 and I2 at 400°c are found to be [H2] = 4.2 x 10^-4 m and [i2] = 1.9 x 10^-3 m, what is the equilibrium concentration of HI?a. The concentrations of HI and I2 will increase as the system is approaching equilibrium.b. The concentrations of H2 and I2 will increase as the system is approaching equilibrium.c. The system is at equilibrium.d. The concentrations of H2 and HI will decrease as the system is approaching equilibriume. The concentration of HI will increase as the system is approaching equilibrium.
The correct answer is e. The concentrations of H2 and HI will decrease as the system is approaching equilibrium.
the equilibrium concentration of HI is 1.18 x 10^-4 M.
The correct answer is e. The concentrations of H2 and HI will decrease as the system is approaching equilibrium.
This is because the equilibrium constant, Kc, for the reaction is 64, which is a relatively large value. This suggests that the forward reaction (2HI → H2 + I2) is favored at equilibrium, meaning that the concentration of HI will decrease as the system approaches equilibrium.
To calculate the equilibrium concentration of HI, we can use the equilibrium constant expression:
Kc = [H2][I2]/[HI]^2
Substituting the given values, we get:
64 = (4.2 x 10^-4)(1.9 x 10^-3)/[HI]^2
Solving for [HI], we get:
[HI] = sqrt((4.2 x 10^-4)(1.9 x 10^-3)/64) = 1.18 x 10^-4 M
Therefore, the equilibrium concentration of HI is 1.18 x 10^-4 M.
Visit to know more about equilibrium:-
https://brainly.com/question/517289
#SPJ11
Use S1/P1 = S2/P2 , the solubility of a gas is 2. 36 g/L at a pressure of 345 atm. What is the solubility if the pressure increases to 445 atm at the same temperature?
To calculate the solubility of a gas when the pressure increases, the ideal gas law can be used. According to the law, the solubility of a gas is inversely proportional to pressure, meaning that as the pressure increases, the solubility decreases. T
herefore, if the pressure increases from 345 atm to 445 atm, the solubility will decrease.
Using the equation S1/P1 = S2/P2, the new solubility can be calculated. The equation can be rearranged to S2 = (S1 x P2) / P1. Plugging in the given values, the new solubility at 445 atm is 1.97 g/L. This is a decrease of 0.39 g/L.
In conclusion, when the pressure of a gas increases, its solubility decreases. Using the ideal gas law, the new solubility can be calculated using the equation S2 = (S1 x P2) / P1. In this case, the solubility of a gas decreased from 2.36 g/L to 1.97 g/L when the pressure increased from 345 atm to 445 atm.
Know more about Ideal gas law here
https://brainly.com/question/28257995#
#SPJ11
