What kind of intermolecular forces act between a nitrogen trichloride molecule and a hydrogen sulfide molecule
Answer:
Dipole induced dipole force of attraction.
Explanation:
This is because dipole induced dipole attraction is a weak force of attraction or london force that occur when a polar molecule causes a form induction in a dipole in an atom or in a nonpolar molecule by altering the arrangement non polar electrons.
Energy resources are required for which of the following ?
Answer: An energy resource is something that can produce heat, power life, move objects, or produce electricity
What is the balanced molecular equation and balanced chemical equation for NaSO4 and KNO3?
Answer:
=KSO4+Na2(NO3)2
Explanation:
the answer is true using this chemical equation balancer
Iodine shines like metals but is not metal what is its basis
Answer:
Iodine is a non-metal, but it is lustrous (lustrous is the property of metal) in nature.
3.88g of NaOH is required to neutralize a spill of hydrochloric acid. A 0.516M solution of NaOH is available for use.
A. Determine the number of moles needed to complete the reaction.
B. What volume of NaOH solution is needed for this reaction?
C. What volume of a stock 1,15M solution would be used to make the solution used in the reaction?
Answer:
ftb
Explanation:
Using the weather radar map shown here, infer at which lettered point the most likely tornado formation and damage would
occur.
es )
A)
А
B)
B
C С
D
D
Answer:
c
Explanation:
this is because it makes sense
Answer:
d
Explanation:
It’s due in 3 minutes please help
Answer:
The Answer is gonna be Indroduction of non-native plant species
How many grams of nitrogen in 7.3 x 10^24 molecules of NaNO3
Answer:
Explanation:
Convert molecules to moles:
1 mole of NaNO₃= 6.02 x 10^23 molecules of NaNO₃
7.3 x10^24/(6.02 x 10^23)=12mol NaNO₃
Find molar mass:
NaNO₃=1 mole of Na and 1mole of N and 3mole of O
Find grams:
14.01g x 12= 168.12 g of N
The oxidation state for Cl is A. -1 as a reactant and +1 as a product B. -1 as a reactant and 0 as a product C. -1 as a reactant and -1 as a product D. +1 as a reactant and +1 as a product
Answer:
no sure
Explanation:
true or false atoms can be made up of just one type of atom
Answer:
false
Explanation:
A compound has the combined properties of the elements from which it is made. Atoms show the macro properties of an element.
It takes 53.0 J to raise the temperature of an 11.0 g piece of unknown metal from 13.0∘C to 24.3 ∘C. What is the specific heat for the metal?
Answer:
Heat absorbed = mS△T
51 = ( 8.2/1000)Kg ×S (11.5)
51×1000= 8.2 (11.5)S
S = 51000/94.3
S = 540.8 J/kg K
C3H8+3O2 = 3CO2+4H2O what is the enthalpy combustion
Answer:
[tex]\Delta H_{comb}=2043.85kJ/mol[/tex]
Explanation:
Hello there!
In this case, according to the given chemical reaction, it possible for us to set up the expression for the calculation of the enthalpy change as shown below:
[tex]\Delta H_r=-\Delta H_{comb}=3\Delta _fH_{CO_2}+4\Delta _fH_{H_2O}-\Delta _fH_{C_3H_8}-3\Delta _fH_{O_2}[/tex]
Thus, given the values of the enthalpies of formation on the attached file, we obtain:[tex]-\Delta H_{comb}=3(-393.5kJ/mol)+4(-241.8kJ/mol)-(-103.85kJ/mol)-3(0kJ/mol)\\\\-\Delta H_{comb}=-2043.85kJ/mol\\\\\Delta H_{comb}=2043.85kJ/mol[/tex]
Best regards!
A mixture of 2.0 moles of H2, 2.0 moles of NH4, 4.0 moles of CO2, and 5.0 moles of
N2 exert a total pressure of 800 torr. What is the partial pressure of each gas in the
mixture respectively?
Answer:
0.01125
Explanation:
:b
Pure substance uniform
Explain the difference between wavelength and frequency
Answer:
Wavelength (typically measured in nanometers) is the distance between two points in a wave.Frequency (typically measured in Hertz) is the number of waves in a specific time . Frequency and wavelength have both direct and inverse relationships. The crucial difference between frequency and wavelength is that frequency shows the total number of wave oscillations in a given time. As against wavelength specifies the distance between two specific points of a wave.
Explanation:
Frequency is how often something changes per second be it amplitude of a voltage on a wire or be it the bobbing back and forth of a bobblehead. Frequency is how often something moves up and down in a second. If a bobble head moves forward and backward in one second then it has a bobbling frequency of 1 Hertz (Hz). The unit of frequency is Hertz (Hz) or # of cycles or oscillations per second. A wavelength is measured in distance like meters (m). For photons or light or radiowaves the equation is wavelength=speed of light/frequency.
Answer:
Wavelength (typically measured in nanometers) is the distance between two points in a wave, while frequency is how often something changes per second be it amplitude of a voltage on a wire or be it the bobbing back and forth of a bobblehead.
Which of the following is a job that bones do?
a.provide the body with shape and protection
b.store minerals
c.produce supply of daily blood cells
d.all of the above
Answer:
a.Provide the body which shape and protection.
Explanation:
Bones usually gives us shape as well as protects our innner organs.
so if it helps don't forget to like and Mark me
Describe two realistic demands protestors could bring forward in their peaceful protest so that they dont face the same situation in future
Answer:
I do not know the Answer I'm just trying to get my point
Explanation:
Thank You
The two realistic demands protestors could bring forward in their peaceful protest include:
Adequate securityProvision of social amenities.Who is a Protester?Thus it is referred to an individual which publicly demonstrates opposition to something.One of the roles of the government is to protect lives and properties.
Making realistic demands during a peaceful protest is looked into in most cases.
Read more about Protester here https://brainly.com/question/11505871
The parts of DNA that give instructions for making proteins are called ________.
a genes
b dominant trait
c recessive trait
d mutation
Answer:
A
Explanation:
Each DNA sequence that contains instructions to make a protein is known as a gene. The size of a gene may vary greatly, ranging from about 1,000 bases to 1 million bases in humans.
When naming bases, you add ___ to the end
Answer:
hydroxide ion
Explanation:
because base produce hydroxide ion when dissolved in water
A student mixes 36.0 grams of silver nitrate solution with 30.0 grams of sodium chromate solution. The mass of the products, which includes the resulting solution and precipitate, is equal to 66.0 grams. Which of the following best explains these results
Answer:
Explanation:
The law of multiple proportions.
2) A balloon was inflated to a volume of 5.0 liters at a temperature of
7.0°C. It landed in an oven and was heated to 147°C. What is its new
volume?
Answer:
[tex]V_1=7.5L[/tex]
Explanation:
Hello there!
In this case, according to the Charles' law equation which help us to understand the directly proportional relationship between volume and temperature:
[tex]\frac{V_2}{T_2}= \frac{V_1}{T_1}[/tex]
Thus, by solving for the initial volume, V1, and making sure we use the temperatures in Kelvin, we can calculate the final volume as shown below:
[tex]V_1= \frac{V_2T_1}{T_2} \\\\V_1= \frac{5.0L*(147+273)K}{(7.0+273)K} \\\\V_1=7.5L[/tex]
Best regards!
why can't we humans live without oxygen? Can't we rely on something else? Why? Why oxygen out of all?
Answer:
because we need it to breathe
Explanation:
we breathe in oxygen and release carbon dioxide
Answer:
Ok i have a really weird theory.
Oxygen actually kills us we just don't know it yet. We need it too live but something in it also poisons us and causes us to die in around 100 years from birth. that's why we all die
real answer
we need it to breathe, when we breath we inhale in oxygen and release carbon dioxide which allows trees to grow and they produce more oxygen. We cant rely on anything else because oxygen is important and without it we die. Oxygen is one of the purist airs.
A rigid, insulated vessel is divided into two compartments connected by a valve. Initially, one compartment, occupying one-third of the total volume, contains air at 500oR, and the other is evacuated. The valve is opened and the air is allowed to fill the entire volume. Assuming the ideal gas model with variable specific heats. Determine: a. the final temperature of the air (in oR) b. the amount of specific entropy produced (in Btu/lbm oR)
Answer:
a) the final temperature of the air is 500° R
b) the amount of specific entropy produced is 0.0758 Btu/lb-°R
Explanation:
Given the data in the question;
Air at 500° R = [tex]T_i[/tex]
Using first law of thermodynamic;
δQ = dU + W
now, since the vessel is insulated, the transfer is zero, work done also is zero since there is also no external work done.
δQ = dU + W
0 = dU + 0
dU = 0
[tex]u_f[/tex] - [tex]u_i[/tex] = 0
[tex]u_f[/tex] = [tex]u_i[/tex]
hence, change in internal energy is 0
Now, since the ideal internal energy is a function of temperature, the temperature will also remain the same;
[tex]T_f = T_i[/tex]
F = 500° R
Therefore, the final temperature of the air is 500° R
b)
given that; initial volume is one-third of the total volume
V₁ = [tex]\frac{1}{3}[/tex]V₂
3V₁ = V₂
3 = V₂/V₁
Now, we take the value of gas constant R from air property table; gas constant R = 0.069 Btu/lb-R
so we calculate the entropy change;
Δs = [tex]c_v[/tex]In( [tex]\frac{T_2}{T_1}[/tex] ) + R.In( [tex]\frac{V_2}{V_1}[/tex] )
we substitute
Δs = [tex]c_v[/tex]In( [tex]\frac{500}{500}[/tex] ) + 0.069 × In( 3 )
Δs = 0 + [0.069 × In( 3 )]
Δs = 0 + [0.069 × 1.0986]
Δs = 0.0758 Btu/lb-°R
Therefore, the amount of specific entropy produced is 0.0758 Btu/lb-°R
Insulated vessels separate the environment of the outer and the inner system. The final temperature is 500 degrees R and 0.0758 Btu/lb- degree R is the entropy.
What is temperature?The temperature is the measure of the hot or the coldness of the system. The first law of the thermodynamics is used to measure the final temperature of the system:
[tex]\rm \Delta Q = \rm \Delta U + W[/tex]
The work done will be zero as the system is insulated and no external work is being done.
[tex]\begin{aligned} \rm 0 &= \rm \Delta U + 0\\\\\rm U_{f} - U_{i} &= 0\\\\\rm U_{f} &= \rm U_{i} \end{aligned}[/tex]
Hence, the change in the internal energy is zero. Thus, the final temperature will remain the same,
[tex]\rm T_{f} = \rm T_{i} = 500 ^{\circ} \rm R[/tex]
Now, as we know, the initial volume is one-third of the total volume then,
[tex]\begin{aligned} \rm V_{1} &= \rm \dfrac{1}{3} V_{2}\\\\\rm 3V_{1}&= \rm V_{2}\\\\3 &= \rm \dfrac{V_{1}}{V_{2}}\end{aligned}[/tex]
The change in entropy is calculated as:
[tex]\begin{aligned} \rm \Delta S &= \rm C_{v} ln ( \dfrac{T_{2}}{T_{1}}) + R \times ln ( \dfrac{V_{2}}{V_{1}}) \\\\&= 0 + [0.069 \times \rm ln( 3 )]\\\\& = 0.0758 \;\rm Btu/lb-^{\circ}R \end{aligned}[/tex]
Therefore, the entropy produced is 0.0758 Btu/lb- degree R.
Learn more about entropy here:
https://brainly.com/question/19538748
Please balance the equation C7H16 + CoF3 = C7F16 + HF +CoF2
with solutions
b. how many grams of CH6 is needed to react with 20.0 grams of HF?
C. how many particles of CoF3 is needed to react with 40.0 grams of CzF16?
d. how many grams of CH16 will be produce from 2.03 x 10 molecule of CoFs?
e. Find the Limiting reactant and exXcess reactant in CF16?
6g of CH16
6g of CoFa
f. Find the theoretical yield from CzFi6?
g. What is the percent yield of C;F16 if the actual yield is 1.28 g ?
The acid ionization equilibrium for the weak acid HF is represented by the equation above. To prepare a buffer with a pH=3.50, a student needs to mix 250.mL of 0.100MHF and 250.mL of 0.100MKF. If the student mistakenly mixes 250.mL of 0.0500MHF and 250.mL of 0.0500MKF, which of the following is the result of this error?
The buffer will have a lower capacity because of the smaller number of moles of HF and F− available to react if an acid or base is added.
The buffer will have a lower capacity because of the smaller number of moles of H F and F with a negative 1 charge available to react if an acid or base is added.
The buffer will have a lower capacity because the smaller amount of HF and F− will lower the pH of the buffer, and buffers of lower pH have a lower buffer capacity.
The buffer will have a lower capacity because the smaller amount of H F and F with a negative 1 charge will lower the p H of the buffer, and buffers of lower p H have a lower buffer capacity.
The buffer will have a higher capacity because a larger proportion of HF and F− will ionize at lower concentrations, resulting in the neutralization of any added acid or base.
The buffer will have a higher capacity because a larger proportion of H F and F with a negative 1 charge will ionize at lower concentrations, resulting in the neutralization of any added acid or base.
The buffer will have the same capacity because the large volume of the buffer solution dilutes any added acid or base
Answer:
4
Explanation:
From the options provided the result of the error is ( A ) ; The buffer will have a lower capacity because of the smaller number of moles of HF and F⁻ available to react if an acid or base is added.
Considering the acid ionization equilibrium for the weak acid HF.
A buffer solution is a solution that its PH value remains unchanged when a small amount of acid or base to added to the solution, therefore when the moles of acid or base present in the buffer solution is high enough the buffer solution will have a high buffer capacity. from the mistake of the student the number of moles present is lesser which means that the buffer solution will have a lower capacity
Hence the buffer will have a lower capacity because of the smaller number of moles of HF and F⁻ available to react is an acid or base is added.
learn more : https://brainly.com/question/2131477
What is the molarity (M) of a solution that has 0.50 moles of solute dissolved in 1.0
liter of solution?
Answer:
it is 0.50=0.5 M
Explanation:
Molarity definition is measure the concentration of solution.
and the rule is
molarity(M)= moles of solute/volume of solution in liters
Ex: 2.1 M MgCl2= 2.1 mole MgCl2/ L MgCl2 solution
Which measurement occurs last when collecting data to determine the
percentage by mass of a solution?
mass percent = (mass of element in 1 mole of compound / mass of 1 mole of compound) x 100. The formula for a solution is:
mass percent = (grams of solute / grams of solute plus solvent) x 100. or.
mass percent = (grams of solute / grams of solution) x 100. The final answer is given as %.
Hope this helps!!
A compound with an approximate molar mass of
65.0g/mol is made up of C, H and Cl. This same
Compound contains 55% of Cl by mass .lf 9g
of the compound contains 4.19 x 10²³ atoms,
determine the compound's:
a empirical formular and molecular formular
5. What physical property of foam makes it a good choice to
use in life vests?
A. Foam has a relative density less than water.
B. Foam is a good thermal insulator.
C Foam is non-magnetic.
D. Foam is soluble in water.
8. The density of a gas at 350 C is 0,087 g/L. Compute the density at STP.
Answer:
0.20 g/L
Explanation:
Step 1: Calculate the molar mass of the gas (M)
At T = 350 °C = 623 K and P = 1 atm (we will assume this data), the density (ρ) of the gas is 0.087 g/L. We can calculate the molar mass of the gas using the following expression.
ρ = P × M/R × T
M = ρ × R × T/P
M = 0.087 g/L × (0.0821 atm.L/mol.K) × 623 K/1 atm = 4.5 g/mol
Step 2: Calculate the density of the gas at STP
At standard temperature (T = 273.15 K) and standard pressure (P = 1 atm), the density of the gas is:
ρ = P × M/R × T
ρ = 1 atm × 4.5 g/mol /(0.0821 atm.L/mol.K) × 273.15 K = 0.20 g/L
