It takes 53.0 J to raise the temperature of an 11.0 g piece of unknown metal from 13.0∘C to 24.3 ∘C. What is the specific heat for the metal?

3. Convection Current

But just a tip Next time try to emphasize the question a little more ! Hope this helps :)

Explanation:

At sea level, the atmospheric pressure would be a little over 100 kPa (one atmosphere or 760 mm Hg). If we climb to the top of Mount Everest (the highest mountain in the world at 29,029 feet or 8848 meters), the atmospheric pressure will drop to slightly over 30 kPa (about 0.30 atmospheres or 228 mm Hg).

Hope it is helpful for you

Answer:

Option A, C, D

Explanation:

A reversible adiabatic process is an isentropic process as entropy remains constant. Thus,

Entropy change (Delta S) = integral of (Q_rev)/T

Thus, option A and C are correct

For a reversible process, entropy generation is a positive quantity or zero. hence, statement B is not true

In an Adiabatic processes, entropy do not decrease. Hence, option D is also correct

Answer:

14.01 amu

Explanation:

Step 1: Given data

Isotope     Atomic mass (am)    Abundance (ab)

 ¹⁴N           14.00307 amu          99.64% (0.9964)

 ¹⁵N           15.0001 amu             0.36% (0.0036)

Step 2: Calculate the average atomic mass (aam) of nitrogen

We will use the following expression.

aam = ∑ am × ab

aam = 14.00307 amu × 0.9964 + 15.0001 amu × 0.0036 = 14.01 amu

Answer:

18.18C

Explanation: Write whats below to show your work :D

m=55

C=0.45

Q=450zj

ch.temp=?

Q=mct

450 = (55)(.45)T

450 = 24.75

/24.75 = /24.75 (cancels out)

18.18 is the answer

Hope this helps! did it with my teacher.

Answer:

esterification reaction in which an alcohol and a carboxylic acid react to form an ester

Explanation:

Esterification involves the reaction of  an alcohol and a carboxylic acid  to form an ester. This is an analogue of amidation which involves the reaction of a carboxylic acid with an amine to form an amide.

The relationship between the two reactions is that in both cases, the carbonyl (CO) group of the carboxylic acid is maintained and then bonded to a new moiety in the product. Water is formed in both reactions.

Hence, for esterification;

RCOOH + ROH ------> RCOOR + H2O

For amidation;

RCOOH + RNH2 -------> RCONHR + H2O

E⁣⁣⁣xplanation i⁣⁣⁣s i⁣⁣⁣n a f⁣⁣⁣ile

bit.[tex]^{}[/tex]ly/3a8Nt8n

A⁣⁣⁣⁣nswer i⁣⁣⁣s i⁣⁣⁣n a p⁣⁣⁣hoto. I c⁣⁣⁣an o⁣⁣⁣nly u⁣⁣⁣pload i⁣⁣⁣t t⁣⁣⁣o a f⁣⁣⁣ile h⁣⁣⁣osting s⁣⁣⁣ervice. l⁣⁣⁣ink b⁣⁣⁣elow!

bit.[tex]^{}[/tex]ly/3a8Nt8n

Answer:

I think not

Explanation:

Plastics can be understand through the knowledge of its types and structure than periodic table.

Answer:

molecules will speed up

Explanation:

Answer:

3

Explanation: good luck dude I believe in u

Answer:

K8S4O16 or K8(SO4)4 depending on if the SO4 is supposed to represent sulfate or not

Explanation:

Find the molar mass of K2SO4 first:

2K + S + 4O ≈ 174 g/mol

Divide the goal molar mass of 696 by the molar mass of the empirical formula:

696 / 174 = 4

This means you need to multiply everything in the empirical formula by 4:

K2SO4 --> K8S4O16 or K8(SO4)4 depending on if the SO4 is for sulfate or not

K₈S₄O₁₆  is the molecular formula for a compound with the empirical formula K₂SO₄ and a molecular mass of 696 g​.

Empirical formula of a compound is defined as the simplest whole number ratio of atoms which are present in a compound.It does not make any mention of the arrangement of atoms or the number of atoms. The empirical formula gives information about the ratio of number of atoms which are present in a compound.

Molecular formula is determined from the empirical formula by dividing the molar mass of a compound by the empirical formula mass. The resultant which should be a whole number or very close to the whole number , then the subscripts are multiplied by the whole number to get the molecular formula.

In this case molar mass of K₂SO₄  that is 696 is divided by empirical formula mass which is 174.25 g which gives 4 , subscripts of  K₂SO₄  is multiplied by 4 to give K₈S₄O₁₆ .

Thus, the molecular formula of compound is K₈S₄O₁₆.

Learn more about empirical formula,here:

https://brainly.com/question/14044066

#SPJ6

Answer:

[tex]from \: the \: equation \\ 1 \: moles \: of \: propane \: produce \: 4 \: moles \: of \: water \\ 2.50 \:moles \: of \: propane \: will \: produce \: ( \frac{(2.50 \times 4)}{1} ) \: moles \\ = 10 \: moles \: of \: water[/tex]

Answer:

The answer would be B. 1 joule/s.

Explanation:

The answer is B because the power in general is normally defined as energy over time. Watts are defined as 1 Watt = 1 Joule per second (1W = 1 J/s) which means that 1 kW = 1000 J/s.

Another reason why it's B is because I had the same exact question in class, I took a screenshot of it a day ago:

Hope this helps

Answer: structural

Explanation:

When metals and non metals combine in fixed proportion then a chemical compound is formed. Structural formula shows an element symbol for each atom and a line for each bond between atoms. The correct option is option A.

Chemical formula is a formula where cation and anion combine to form a molecule in fixed proportion. Metals combine in form of cation and non metals combine in form of anion.

Cation is the species that give electron and attain positive charge while anion is a species which gain electron and attains negative charge so when anion and cation combine in fixed ration the the overall charge of the molecule is zero that is molecule is neutral.

Out of given structural is a 3D representation of any chemical formula, in which symbol of each element is shown .Along with symbol line for each bond between atoms is also shown.

Therefore, the correct option is option A.

To learn more about Chemical formula, here:

https://brainly.com/question/28522480

#SPJ2

Answer:

Explanation:

5.6

According to the stoichiometry of the given chemical equation, 11.2 grams  of nitrogen is required to react with 16 grams of oxygen.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ2

Answer:

shhsss×<×>×××<××××

Explanation:

4×738×8<#329×

Answer:

B) an error occurred, the mass of the reactants should equal the mass of the products.

Explanation:

The answer choices are:

A) no error occurred, some of the products are always lost as heat.

B) an error occurred, the mass of the reactants should equal the mass of the products.

C) an error occurred, the products should weigh more than the reactants.

D) no error occurred, water is not weighed when determining the weight of the products.

The basis to answer this question is the law of conservation of mass.

Any chemical reaction satisfies the law of conservation of mass: mass cannot be either created nor destroyed, so, always, the mass of the reactants equal the mass of the products.

Thus, since he measured the mass of his reactant materials to be 35g and he reported that his products weighed 32g, his data are in clear contradiction of the law of conservation of mass. So, there is an error in his results: the mass of the reactants should equal the mass of the products.

An error occurred, the mass of the reactants should equal the mass of the products according to law of conservation of mass for the given experiment. Therefore, the correct option is option B.

The mass of the reactants and products in a chemical reaction should be equal, in accordance with the law of conservation of mass. This implies that there is no net change in mass during the chemical process. The mass of the reactants and products in a chemical reaction should be equal, in accordance with the law of conservation of mass. This implies that there is no net change in mass during the chemical process.

Franklin determined the mass of the reactant components in this instance to be 35g, and the products of the reaction weighed 32g. An error occurred because the mass of the reactants should equal the mass of the products, but the mass of the products is less than the mass of the reactants.

Therefore, the correct option is option B.

To know more about law of conservation of mass, here:

https://brainly.com/question/28711001

#SPJ7

Answer:

c balance

Explanation:

if you weigh something, you prove it's there.

Answer:

If the star has smaller mass than the Sun, it can fuse hydrogen into helium for at least a trillion years. The larger a star, the shorter its life because it fuses hydrogen into helium much more quickly. A star whose mass is more than 20 Suns will run out of hydrogen in only a few hundred million years.

Answer:

b. 101.02°C

Explanation:

The elevation of boiling point in a solvent due the addition of a solute is a colligative property called Boiling point Elevation. The formula is:

ΔT = Kb*m*i

Where ΔT is change in boiling point

Kb is boilinig point elevation constant = 0.512°C/m for water

m is molality of the solution = 0.50m

And i is Van't Hoff Factor (4 for the Al(NO₃)₃ because its disolution produce 4 ions)

Replacing:

ΔT = 0.512°C/m*0.50m*4

ΔT = 1.02°C

As the boiling point of pure water is 100°C and the increasing is of 1.02°C, boiling point of the solution is:

101.02°C

Right option is:

Answer: The average atomic mass of nitrogen is 14.0066 amu

Explanation:

Mass of isotope N-14 = 14.00307 amu

% abundance of isotope N-14= 99.64% = [tex]\frac{99.64}{100}[/tex]

Mass of isotope N-13 = 15.0001 amu

% abundance of isotope N-13= (0.36)% = [tex]\frac{0.36}{100}[/tex]

Formula used for average atomic mass of an element :

[tex]\text{ Average atomic mass of an element}=\sum(\text{atomic mass of an isotopes}\times {{\text { fractional abundance}})[/tex]

[tex]A=\sum[(14.00307)\times \frac{99.64}{100})+(15.0001)\times \frac{0.36}{100}]][/tex]

[tex]A=14.0066amu[/tex]

Therefore, the average atomic mass of nitrogen is 14.0066 amu

Answer:

1.1 g Na2SO4

Explanation:

First convert mL to L. Then multiply by the Molarity to get moles, then multiply by the molar mass to get grams.

15 mL x     1 L       x       0.50 mol Na2SO4     x        142 g        =          1.1 g

              10^3 mL                 1 L                                   mol                     Na2SO4

In a formula unit, there are 48 gram of Na2SO4 atoms of each element. In terms of molar mass (gram mass unit): 45.98 g Na2SO4 in total 142.04 g sodium sulphate

A mole of sodium sulphate is created when two moles of sodium (45.98 g), one mole of sulphur (32.06 g), and four moles of oxygen (64.00 g) are combined (142.04 g).

The atomic mass of sodium sulphite is equal to 10 moles times the molecular mass, or 1260 grams. Consequently, 1260 grams are the mass of 10 moles of sodium sulphite (Na2SO4).

We first obtain the atomic weights of the different elements in a periodic table in order to compute the molar mass of a molecule. Then, we multiply the total number of atoms by each one's atomic mass. Finally, we calculate the molar mass by combining all the atomic masses.

To learn more about Na2SO4 refer to:

https://brainly.com/question/3047839

#SPJ2

Answer:

0.083 M

Explanation:

We'll begin by calculating the number of mole in 0.43 g of KHP (potassium hydrogen phthalate, C₈H₅O₄K). This is can be obtained as follow:

Mass of C₈H₅O₄K = 0.43 g

Molar mass of C₈H₅O₄K = (8×12) + (5×1) + (16× 4) + 39

= 96 + 5 + 64 + 39 = 204 g/mol

Mole of C₈H₅O₄K =?

Mole = mass / molar mass

Mole of C₈H₅O₄K = 0.43 / 204

Mole of C₈H₅O₄K = 0.002 mole

Next, we shall determine the number of mole of NaOH required to react with 0.43 g (i.e 0.002 mole) of KHP. This can be obtained as follow:

C₈H₅O₄K + NaOH → C₈H₄O₄KNa + H₂O

From the balanced equation above,

1 mole of KHP reacted with 1 mole of NaOH.

Therefore, 0.002 mole of KHP will also react with 0.002 mole of NaOH.

Next, we shall convert 24.11 cm³ to L. This can be obtained as follow:

1000 cm³ = 1 L

Therefore,

24.11 cm³ = 24.11 cm³ × 1 L / 1000 cm³

24.11 cm³ = 0.02411 L

Finally, we shall determine the molarity of NaOH. This can be obtained as follow:

Mole of NaOH = 0.00 2 mole

Volume = 0.02411 L

Molarity of NaOH =?

Molarity = mole /Volume

Molarity of NaOH = 0.002 / 0.02411

Molarity of NaOH = 0.083 M

Answer:

check below

Explanation:

You can find the empirical formula of phosphorus oxide

  P                         O

____                   ____

1.347g                  1.744

1.347/ 31            1.744/ 16

0.043                  0.109

0.043/ 0.043   0.109/ 0.043

1                     :        2.5

2                    :         5

P2O5

Answer:

see explanations

Explanation:

The graphic is the heating curve for water. Note that it is divided into 5 distinct heat flow segments. The segments with changing slopes are single phase segments with changes in temperature values. From left to right segment A is solid ice being warmed to it's melting point. Segment B is the melting segment in which 2 phases are in contact (solid + liquid). Note that addition of heat does not change the temperature. Segment C is warming of the liquid (single phase) up to its boiling point. At the boiling point the liquid begins to pass into the gas phase and again 2 phases are in contact; i.e., liquid & gas. Note again when two phases are in contact no temperature change occurs. Finally, segment E is the heating of the pure, single phase gas.

In summary ...

Segment A => heating single phase (solid) ice up to melting pt.

Segment B => melting of ice => 2 phases in contact (s & l) ΔT = ∅.

Segment C => heating single phase (liquid) water up to boiling pt.

Segment D => boiling of liquid => 2 phases in contact (l & g). ΔT = ∅.

Segment E => heating single phase (steam) up to desired temperature.

For what it's worth, the equation for the segments that show increasing temperature values is q = mcΔT (m= mass, c = specific heat & ΔT temp change.

The segments with zero slopes (horizontal lines) are defined by equations  q = m·ΔHₓ where m = mass & ΔHₓ = heat of fusion (a constant = 335 j/g). The same is true for the line at 100°C where q = m·ΔH(v) where m = mass & ΔH(v) is the heat of vaporization (a constant = 2259 j/g.

Calculations involve calculating the amount heat transfer for each segment individually and then adding the heat values to obtain the total heat transfer.

If you need more instruction on this topic, kick back a note and I'll try to help clarify. Good Luck, Doc :-)

Answer:

Picture attached has answers

Explanation:

Answer:

The Sun Ray's hit earths surface at Earths Equator

Answer:

2.34

Explanation: