What’s the easiest way to add energy to matter
Answer:
The easiest way is to heat matter which raises its internal energy andso the mass as well. Another possibility is to accelerate matter as in case of protons or heavy ions in the LHC, Protons ,for example , are accelerated to the energies of 6500 GeV which means increase of the rest mass by a factor of almost 7000
Stronger acids are those that -
O more completely inhibit polarity in water
O exhibit hydrogen bonding
O hold on to their protons more strongly
O lose their protons more easily
Select whether the statement is for Speed, Velocity, or Acceleration.
The earth travels at 30 kilometers per second.
Velocity
Speed
Acceleration
Answer:
I think that the statement is relative to speed because it is saying km per second.
Answer:
Speed
Explanation:
A sample of a gas in a balloon has a volume of 4.20 L and temperature of 48.2 °C. Calculate the volume when
the temperature is lowered to 15.4°C at constant pressure.
a. 3.77
b. 4.20
c. 1.34
d. 13.15
e. 4.68
Answer:
V1/T1=V2/T2
4.20L/321.2K=x/288.4K
multiply both side by 288.4
1211.28/321.2=x
x=3.77L
Option 3 13.15 is the correct answer.
What is Charles law?Charles's law exists as an experimental gas law that explains how gases tend to expand when heated. A modern statement of Charles's law exists: When the pressure on a sample of a dry gas exists held constant, the Kelvin temperature and the volume will be in direct proportion.
According to Charles law
The volume occupied by a fixed amount of gas is directly proportional to its absolute temperature, if the pressure remains constant.
[tex]V1/T1=V2/T2[/tex]
Where,
[tex]V1[/tex]= first volume
[tex]V{2}[/tex] = second volume
[tex]T{1}[/tex] = first temperature
[tex]T{2}[/tex]= second temperature
Here, at constant pressure,
[tex]V1/T1=V2/T2[/tex]
[tex]V1[/tex]=4.20 L
[tex]V2[/tex]= x
[tex]T1[/tex]=321.2 K
[tex]T2[/tex]=288.4 K
Therefore, [tex]V1/T1=V2/T2[/tex]
4.20L/321.2K=x/288.4K
1211.28/321.2=x
x=3.77L
Thus option a is correct.
To learn more about Charles law refer to:
https://brainly.com/question/16927784
#SPJ2
A scientist is investigating which type of medicine would dissolve faster, a solid pill or a scoop of powder. Which hypothesis should the scientist develop given prior knowledge about surface area?
A. Solid pills have more surface area and will take longer to dissolve.
B. Solid pills have less surface area and will not dissolve.
C. Powders have less surface area and will dissolve faster.
D. Powders have more surface area and will dissolve faster.
Answer: The correct option is D (Powders have more surface area and will dissolve faster).
Explanation:
For a scientist to investigate whether a powered pill will dissolve faster than a solid pill is putting the rate of the reaction under study.
Rate has to do with what is achieved per unit time. One of the factors affecting rates of chemical reaction includes the SURFACE AREA.
Reagents in solution tend to react faster than reagents in solid form. This is because molecules are freer to move about and collide more effectively in solutions. For solids, the more the surface area exposed for reaction the faster the reaction. For example, a lump of Zinc will not react as fast as powdered zinc with dilute hydrochloric acid to produce hydrogen.
Therefore, with the above explanation and example concerning surface area in a chemical reaction, the hypothesis the scientist should develop is that powers which has more surface area will dissolve faster than the soils pills.
Answer:
The correct option is D (Powders have more surface area and will dissolve faster).
Explanation:
What type of substances can we separate using electrolyisis and why?
Answer:
ionic substances because they contain charged particles
How do plants and animals rely on each other?
Answer:
b
Explanation:
Baby Mice
Seif's pet mouse had babies. Five of the babies were black and two were white. The
father mouse was black. The mother mouse was white. Seif and his friends wondered
why the mice were different colors. These were their ideas
Jerome: Baby mice inherit more traits from their fathers than their mothers
Alexa: The baby mice got half their traits from their father and half from their mother.
Juner Male traies are stronger than female traits.
Seif Rack mke have more traies than white mice.
Fiona: The black baby mice are probably make and the white baby mice are probably
female
India, Paver in die for colo don't matter what whine will
Consider Seif and his friends responses/ideas. Answer the
following questions:
1. Which friend has the correct answer about how traits are inherited in this method of reproduction?
2. Is this type of reproduction asexual or sexual? How do you know? (use details from the texti
Answer:
I would say for #1 Fiona and for #2 sexual
Explanation:
Please give brailiest
The process of heating oil to separate out its various components is called __
a. hydraulic fracturing
b. peak production
c. refining
d. decommissioning
e. enrichment
The answer is refining which is c
what is the bond formation of N and H
Answer:
A single bond, but it's also a hydrogen bond.
Explanation:
A hydrogen bond forms when hydrogen bonds to the 3 most electronegative atoms: Oxygen, Nitrogen, or Fluorine.
It's a single bond because hydrogen only has two valence electrons. Therefore, the rest of the electrons are placed around the nitrogen atom.
How will popcorn protect a egg by reducing the force of impact on the egg? How does it work?
Answer:
The popcorn will take less impact because the force goes into the popcorn serving as a cushion for the egg. The egg will take less damage because the force will cancel out.
Explanation:
correctly label the picture with the correct phase
Answer:
solid goes on the first on and liquid goes on the sceond one
If 34.2 g of NaOH are dissolved in water to make a 750 mL solution, what is the molarity of the solution?
Answer:
1.14 M
Explanation:
First divide the mass of NaOH by the molar mass of NaOH. Then divide by the volume to get molarity.
34.2 g / 39.997 g/mol = 0.855 mol NaOH
0.855 mol NaOH / 0.750 L = 1.14 M NaOH
______ is the tendency of an organism to maintain a constant and stable internal environment
Answer:
Homeostasis is the answer
Explanation: it maintains a constant and stable environment
Which unit is commonly used for measuring pressure?
O m3
O bar
O N/m3
O Celsius
Answer:
3
Explanation:
Answer:
bar
Explanation:
yes
What causes thermal pollution in rivers?
1. automobile exhaust
2. nuclear power plants
3. solar radiation
4. factory smokestacks
Answer:
nuclear power plants .....
Nuclear power:
accounts for half of the energy used in the U.S.
creates less energy than fossil fuels
is a nonrenewable resource
is a renewable resource
Answer:
Is a nonrenewable resource
Explanation:
"The fuel for fusion reactors can be drawn from sea water in an almost unlimited supply. The fuel for fission, on the other hand, comes from a limited supply of uranium. Once it is depleted, it cannot be easily replenished. For this reason, nuclear power is considered a nonrenewable resource."
I got this source from ODY
Hope I could help! :)
Have a nice day
Answer:
is a nonrenewable resource
Explanation:
What is the freezing point, in °C, of a solution made with 1.31 mol of CHCl₃ in 530.0 g of CCl₄?
Answer:
-96.6°C
Explanation:
Given:
moles CHCl3 = 1.31 molmass CCl4 = 530.0 gmass CCl4 = 530.0 g * (1 kg / 1000)
mass CCl4 = 0.5300 kg
First calculate the molality (m) of the solute, which is the moles of solute divided by the kg of solvent ([tex]\frac{moles}{kg}[/tex]):
molality CHCl3 = (mass moles CHCl3) / (mass CCl4 in kg)
molality CHCl3 = (1.31 mol) / (0.5300 kg)
molality CHCl3 = 2.471698m
Decrease in freezing point of solvent = (Kf) * (molality of solute)
Decrease in freezing point of CCl4 = (Kf) * (molality CHCl3)
Decrease in freezing point of CCl4 = (29.8°C/m) * (2.47m)
Decrease in freezing point of CCl4 = 73.6566°C
Then use the molality of the solute to calculate the change in freezing point and subtract the change from the original freezing point.
Freezing point of solution =
(freezing point of pure solvent) - (Decrease in freezing point)
Freezing point of solution = (-22.9°C) - (73.66°C)
Freezing point of solution = -96.6°C
Learn more about freezing point here: brainly.com/question/22888016
If 5.7 mol Cl2 reacts with Na , how many grams of NaCl could be formed? The
molar mass of NaCl is 58.44 g/mol
Answer:
666.22grams
Explanation:
The balanced chemical equation of this reaction is given as follows:
2Na + Cl2 → 2NaCl
Based on the above equation, 1 mole of Chlorine gas (Cl2) is needed to produce 2 moles of sodium chloride (NaCl).
Therefore, 5.7moles of Cl2 will react to produce (5.7 × 2) = 11.4moles of NaCl.
Note that, the mass of NaCl was asked in this question. We find the mass of NaCl from the mole by using the formula;
moles = mass/molar mass
Molar mass of NaCl = 58.44 g/mol
11.4 = mass/58.44
mass = 58.44 × 11.4
mass = 666.22grams.
what type of cells are these?
(Plant or animal)
Answer:
5 is an animal cell, 6 is a plant cell
Explanation:
hope this helps!
NO LINKS07.02 LC)
What happens when a particle and its antiparticle collide? (2 points)
O They combine nuclei
O They break into quarks
They are converted to energy
O They become antimatter
When a particle and its antiparticle collide they are converted to energy.
What is collide?A colloid would be a mixture in which a component made up of insoluble particles that are scattered at a microscopic scale is suspended within another component.
What is energy?In order to accomplish work and to produce heat as well as light, energy must be supplied to a body or even to a physical system. Energy would be the quantitative attribute that does this. Energy would be transformed in form but cannot be created and destroyed, according to the rule of conservation of energy.
Annihilation occurs when a particle collides including its anti-particle. The particle and its antiparticle's whole mass are transformed back into energy to produce two gamma-ray photons. You won't find antiparticles in everyday stuff since they typically barely last for a tiny amount of time until annihilation takes place.
Therefore, the correct answer will be option (c).
To know more about energy and collide
https://brainly.com/question/11647605
#SPJ2
Materials that allow electrons to move easily from atom to atom are called _____________.
Answer:
Explanation:
conductors
Help! Is there a way to email outlook support for help? If so please comment their email address, as I can't call them on their hotline right now.
Thank you, so much in advance! :)
Answer:
Explanation:
Even if you have a Hotmail email address, you now use the Outlook.com interface to ... I searched and found a Hotmail support number, but is it legit? ... one from Leo's e-mail, I receive a message from windows stating it can't find the site.
If 0.583 g of ammonia (NH3) is dissolved to make 250 mL of solution, what is the molarity?
Answer:
0.137 M NH3
Explanation:
First divide the mass of NH3 by the molar mass of NH3, and then divide by the volume to get molarity.
0.583 g / 17.031 g/mol = 0.0342 mol NH3
0.0342 mol NH3 / 0.250 L = 0.137 M NH3
how do you determine the total mechanical energy stored of an object
WHAT INVESTMENT OF A $125 WOULD HAVE THE MOST LASTING VALUE FOR YOUR FUTURE?
A pair of jordans
Some nice cologne or perfume
3 college credits at MCC BAG
a dinner with 2 or 3 people
Answer:
a pair of jordans
Explanation:
6. The substance whose Lewis structure shows triple covalent bonds is
a. Hydrogen dioxide
b. Nitrogen trihydride
c. Carbon monoxide
d. Carbon tetrachloride
Answer: b) Nitrogen trihydride should be the answer.
Explanation:
Nitrogen trihydride is the substance whose Lewis structure shows triple covalent bonds. Hence option is correct.
What are covalent bonds?Covalent bonds are defined as the shared electron pair between two atoms that creates an interatomic bond. At room temperature, covalent compounds can be found in all three of their physical states and often have low boiling and melting temperatures. Covalent substances don't carry electricity.
Lewis structure are defined as a structural depiction of a molecule using lines or pairs of dots to represent covalent bonds between atoms and dots to show the locations of electrons surrounding the atoms. The goal of creating a Lewis dot structure is to locate lone electron pairs in molecules in order to better understand how chemical bonds are formed. In chemistry, a triple bond is a covalent connection where two atoms share three pairs of electrons, such as in the nitrogen molecule (N2) or the acetylene molecule (C2H2).
Thus, Nitrogen trihydride is the substance whose Lewis structure shows triple covalent bonds. Hence option is correct.
To learn more about Lewis structure, refer to the link below:
https://brainly.com/question/20300458
#SPJ6
Rubidium Rb
when was the element discovered and by whom ??? ASAP MAKE IT AT LEAST A PARAGRAPH!!!
Answer:
Rubidium Rb was discovered in 1861It was discovered by the German chemist Robert Wilhelm Bunsen and the German physicist Gustav-Robert KirchoffExplanation:
Rubidium was discovered by the German chemists Robert Bunsen and Gustav Kirchhoff in 1861 while analyzing samples of the mineral lepidolite with a device called a spectroscope. The sample produced a set of deep red spectral lines they had never seen before. Bunsen was eventually able to isolate samples of rubidium metal. Today, most rubidium is obtained as a byproduct of refining lithium.
BRAINLIEST WILL BE GIVEN, PLZ HELP + 15 PTS
Which properties are characteristic of true solutions? (Select all that apply.)
The light beam is unaffected.
The particles are larger than 10 -8 cm.
The particles are dissolved.
The particles are suspended indefinitely.
Answer:
The correct answer is the last option
Explanation:
Captain uses a steering wheel called him to turn the rudder A sailing ship do you think it would be easier for him to turn a large wheel or a small wheel explain why you think so
Answer:
Large wheel.
Explanation:
It would be easier for the captain to turn a large wheel as compared to a small wheel because less amount of effort is needed by the captain to turn the rudder. If a steering wheel is small, more effort and force is required to turn it while on the other hand, if the steering wheel is large, small effort is needed to turn the rudder. The large size of a sailing boat's steering wheel can help the captain to have more control over the boat as compared to small steering wheel and he is able to access it from either side of the boat.
