I find the pH of a solution whose hydrogen ion concentration 10^-3mol/l also deduce the pOH of the solution
II​

Answer:

8.69 is the pH at the equivalence point

Explanation:

Formic acid, HCHO₂, reacts with NaOH as follows:

HCHO₂ + NaOH → NaCHO₂ + H₂O.

At the equivalence point you will have in the reaction just NaCHO₂ and H₂O. The concentration of NaCHO₂ will be:

Moles: 0.0278L * 0.797mol/L = 0.02216moles

To reach the equivalence point it is necessary to add:

0.02216mol * (1L / 0.928mol) = 0.0239L

Total volume in the equivalence point:

0.0278L + 0.0239L = 0.0517L

Concentration: 0.02216moles / 0.0517L = 0.429M

The equilibrium of NaCHO₂, CHO₂⁻, in water is:

CHO₂⁻(aq) + H₂O(l) ⇄ OH⁻(aq) + HCHO₂(aq)

Where Kb, 5.56x10⁻¹¹ is defined as:

5.56x10⁻¹¹ = [OH⁻] [HCHO₂] / [CHO₂⁻]

In the equilibrium, it is produced X OH⁻ and HCHO₂, and as concentration of NaCHO₂ is 0.429M:

5.56x10⁻¹¹ = [X] [X] / [0.429M]

2.383x10⁻¹¹ = X²

4.88x10⁻⁶ = X = [OH⁻]

As pOH = -log [OH⁻]

pOH = 5.31

And pH = 14 - pH

pH = 8.69 is the pH at the equivalence point

Answer:

Compaction.

Explanation:

All the others are before this.

Answer:

sure

Explanation:

The substance formed after heating the mixture of that of Rahul is caleed a compound. Whereas, Manav's mixture still remains in its current stae that is a heterogeneous mixture.

The compound formed is in black in color whereas the mixture is a mix of brownish-red and yellow.

The compound is a homogeneous mixture whereas the mixture is a heterogenous mixture because of its uneven distribution.

Answer:

The plant uses carbon dioxide and water to make an entirely new chemical hence chemical change.

Explanation:

Plants create their own 'food', they turn carbon dioxide water and sunlight to create starch and glucose..

Answer:

The properties of carbon dioxide and oxygen are different.

Explanation:

im taking the exam right now and Im pretty sure it's D The properties of carbon dioxide and oxygen are different.

Answer:

0.0611M of HNO3

Explanation:

The concentration of the NaOH solution must be 0.1198M

The reaction of NaOH with HNO3 is:

NaOH + HNO3 → NaNO3 + H2O

1 mole of NaOH reacts per mole of HNO3.

That means the moles of NaOH used in the titration are equal to moles of HNO3.

Moles HNO3:

12.75mL = 0.01275L * (0.1198mol / L) = 0.0015274 moles NaOH = Moles HNO3.

In 25.00mL = 0.025L -The volume of the aliquot-:

0.00153 moles HNO3 / 0.025L =

Answer:

C.

Explanation:

You can use the series of elimination for this. First, you look at A. Technology is not an understanding of something new, so we cross that out. Second, you look at B. Technology isn't a series of steps, so we can mark that one off. Third, you look at C. Technology is something created using science for use by society, so we can keep that in mind. Lastly, we check D. Technology doesn't match up to the definition, so we can cross that one out. The answer that would make the most sense would be D.

Answer:

Option D. 0.115 M

Explanation:

The following data were obtained from the question:

Mass of CuSO4 = 36.8 g

Volume of solution = 2 L

Molar mass of CuSO4 = 159.62 g/mol

Molarity of CuSO4 =..?

Next, we shall determine the number of mole in 36.8 g of CuSO4.

This can be obtained as shown below:

Mass of CuSO4 = 36.8 g

Molar mass of CuSO4 = 159.62 g/mol

Mole of CuSO4 =.?

Mole = mass /Molar mass

Mole of CuSO4 = 36.8 / 159.62

Mole of CuSO4 = 0.23 mole

Finally, we shall determine the molarity of the CuSO4 solution as illustrated below:

Mole of CuSO4 = 0.23 mole

Volume of solution = 2 L

Molarity of CuSO4 =..?

Molarity = mole /Volume

Molarity of CuSO4 = 0.23 / 2

Molarity of CuSO4 = 0.115 M

Therefore, the molarity of the CuSO4 solution is 0.115 M.

Answer:

To get the number of atoms in this sample, we first need the number of moles of lead in 11.3 grams

Number of moles of Lead:

Molar mass of lead = 207 grams / mol

Number of moles  = given mass / molar mass

Number of moles = 11.3 / 207

Number of moles = 0.05 moles

Number of atoms of lead in 11.3 gram sample:

Number of atoms = Number of moles * avogadro's number

Number of atoms = 0.05 * 6.022 * 10²³

Number of atoms = 5 * 10⁻² * 10²³ * 6.022

Number of atoms = 30.11 * 10²¹

11.3 g block of lead contains 3.29×10²² atoms

From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.022×10²³ atoms. Thus,

1 mole of lead = 6.022×10²³ atoms

Recall:

1 mole of lead = 207 g

Thus,

With the above information in mind, we can obtain the number of atoms in 11.3 g block of lead as illustrated below:

207 g of lead = 6.022×10²³ atoms

Therefore,

11.3 g of lead = (11.3 × 6.022×10²³) / 207

Thus, 11.3 g block of lead contains 3.29×10²² atoms

Learn more: https://brainly.com/question/9758372

Answer:

Exothermic

Explanation:

Nuclear fission means splitting, so there is a lot of energy being released.

Answer:

its b  

B. 4

Explanation:

Answer:

Molarity = 1.4 M

Explanation:

Given data:

Mass of LiCl = 15.25 g

Volume of solution = 250 mL (250/1000 = 0.25 L)

Molarity of solution = ?

Solution:

Molarity is used to describe the concentration of solution. It tells how many moles are dissolve in per litter of solution.

Formula:

Molarity = number of moles of solute / L of solution

Now we will calculate the number of moles of LiCl.

Number of moles = mass/molar mass

Number of moles = 15.25 g/ 42.39 g/mol

Number of moles = 0.36 mol

Molarity:

Molarity = 0.36 mol / 0.25 L

Molarity = 1.4 M           (M= mol/L)

Complete Question

Sodium carbonate, Na2CO3(s), can be prepared by heating sodium bicarbonate, NaHCO3(s).

2NaHCO3(s) ------> Na2CO3(s) + CO2(g) + H2O(g) Kp = 0.23 at 100oC

If a sample of NaHCO3 is placed in an evacuated flask and allowed to achieve equilibrium at 100oC, what will the total gas pressure be?

Answer:

The value is  [tex]P_T  = 0.959 \  atm [/tex]

Explanation:

From the question we are told that

   The equation is  

[tex]2NaHCO_3_{(s)} \rightarrow  Na_2CO_3_{(s)} + CO2_{(g)} + H2O_{(g)}[/tex]

Generally the equilibrium partial pressure is mathematically represented as

    [tex]K_p =  P_{CO_2} + P_{H_2O}[/tex]

Here  

   [tex] P_{CO_2} \ and  \  P_{H_2O}[/tex] are partial  pressures of  [tex] CO_2 \ and  \ H_2O [/tex] gases

Note: when writing the formula for equilibrium partial pressure we consider only the gas in the reaction

Let assume that    

    [tex]P_{CO_2} =  a[/tex]

Generally  [tex]P_{CO_2} = P_{H_2O}[/tex] since they are both products of the reaction

  So  

       [tex]K_p =  a^2 [/tex]

From the question we are told that [tex]K_p =  0.23 [/tex]

So  

     [tex] 0.23=  a^2 [/tex]

=>  [tex] a = \sqrt{0.23} [/tex]

=>  [tex] a = \sqrt{0.23} [/tex]

=>  [tex] a = 0.4796  \ atm [/tex]

So

     [tex]P_{CO_2} =  0.4796  \ atm[/tex]

and

      [tex]P_{H_2O} =  0.4796  \ atm [/tex]

So the total pressure is

      [tex]P_T  =  0.4796  +  0.4796[/tex]

=>   [tex]P_T  = 0.959 \  atm [/tex]

Answer:

c = π / R × T

Explanation:

The osmotic pressure exerted by a solution is equal to the molarity multiplied by the absolute temperature and the gas constant  R .  Suppose the osmotic pressure of a certain solution is measured to be  22 atm  at an absolute temperature of  353 K.  Write an equation that will let you calculate the molarity  c  of this solution. Your equation should contain only symbols. Be sure you define each symbol other than  R.

Step 1: Given data and definition of the symbols

Step 2: Write an equation that will let you calculate the molarity of this solution, in terms of symbols

The osmotic pressure is a colligative property that can be calculated using the following expression.

π = c × R × T

We can rearrange this expression to calculate the molarity of the solution.

c = π / R × T

Answer:

A) 0.831 M

B) 1.07 m

C) 26.2%

D) 0.0189

Explanation:

A) First we convert the mass of Pb(NO₃)₂ to moles:

Then we divide it by the total volume (1.00 L) to calculate the molarity:

B) We convert the grams of water to kilograms:

Then we divide the Pb(NO₃)₂ by the kilograms of water:

C) We divide the mass of Pb(NO₃)₂ by the total mass of the solution:

D) We calculate the moles of water:

Then we divide the Pb(NO₃)₂ moles by the total number of moles:

Answer:

Atomic radii vary in a predictable way across the periodic table. As can be seen in the figures below, the atomic radius increases from top to bottom in a group, and decreases from left to right across a period. Thus, helium is the smallest element, and francium is the largest.

Explanation:

Answer:

the difference is tyat eruptions of less gassy and more gassy is that the less gassy doesnt retain as much gas as the more gassy one and thus the eruption of the less gassy is less damage to the more gassy

Answer:

Volume of dry gas at STP = 0.432 liters or 432 ml

Explanation:

Given:

Pressure (P) = 740 mmHg - 24 mmHg = 716 mmHg

Temperature (t) = 25 degrees C + 273 K = 298 K

500 ml = 0.5 l

Find:

Volume of dry gas at STP

Computation:

[P1][V1] / T1 = [P2][V2] / T2

[716][0.5] / 298 K = [760][ x Liters] / 273 K

x = 0.432 Liters

Volume of dry gas at STP = 0.432 liters or 432 ml

Answer:

A gamma ray is a penetrating form of electromagnetic radiation arising from the radioactive decay of atomic nuclei. It consists of the shortest wavelength electromagnetic waves and gives off the highest photon energy. The energy spectrum of gamma rays can be used to identify the decaying radionuclides using gamma spectroscopy.

Explanation:

Answer:

c

Explanation:

Answer:

8,903.09 square meters

Explanation:

Doing a quick search online we can see that there are exactly 4046.86 square meters in a single acre (1 acre). Therefore, we can simply use the rule of three to calculate the total amount of square meters in 2.2 acres. We do this by multiplying 2.2 acres by 4046.86 square meters and then dividing by 1 acre to solve for x.

1 acre  <=====>  4046.86 square meters

2.2 acres <====> x

(2.2 * 4046.86) / 1 = x

8903.09 / 1 = x

8,903.09 = x

Finally, we can see that there are 8,903.09 square meters in 2.2 acres.

Answer:

C) an increase in rate of reaction because reactant molecules collide with greater energy

Explanation:

Temperature is one of the factors that affect the rate of a reaction. The rate of a reaction increases with an increase in temperature and vice versa. When the temperature of a reaction increases, the kinetic energy of the reactant molecules increases causing them to react at a faster rate.

The reactant molecules respond to an increase in temperature by colliding at a faster rate due to an increased kinetic energy between the reactant molecules.

Answer:

This is an endothermic reaction with a positive ΔHrxn.

Explanation:

From the question given above, we can see clearly that the energy of the product (Hp) is greater than the energy of the reactant (Hr). This simply means that the reaction is endothermic as the enthalpy change (ΔH) for the reaction will be positive.

Enthalpy change (ΔH) = Heat of product (Hp) – Heat of reactant (Hr)

ΔH = Hp – Hr = positive

NOTE: A reaction with positive enthalphy change (ΔH) is termed endothermic reaction.

Answer:

C

Explanation:

edg 2020

Answer:

outer electrons

Explanation:

Answer:

Energy levels

Explanation:

Answer:

breathe,eat, and drink i guess

Answer:

7.030682 kg

hope it helps!

Answer:

7.030682

Explanation:

Answer:

I think it's C.90º

Explanation:

Answer:

180o

Explanation:

It is 180 degrees because the central atom is the atom in the middle of two electrons. Think about it like a straight line, a straight line is equal to 180 degrees. One electron connected to the central atom will be 90 degrees and if there's another electron, it will be 180 degrees.

Hope this helps:)

Answer:

The velocity of the river increased.

There was more erosion in the stream.

The type of sediment that moved changed.

Explanation:

Answer:

The river increased its slope.

The volume of the river decreased.

The velocity of the river increased.

There was more erosion in the stream.

The type of sediment that moved change

Explanation:

Answer:

the second on is, Changing the sequence of nucleotides in the DNA molecule can change the amino acids in the final protein, leading to protein malfunction. If insulin does not function correctly, it might be unable to bind to another protein (insulin receptor).

the first one is, These three polysaccharides differ in their glycosidic linkages and their functions too. Starting from the cellulose which is the monomer of beta glucose and is found in plant cell wall only. While Starch and Glycogen act as the carbohydrate reserve in plants and animals respectively. Though their chains have slight differences at the branching point, which is described below.

Explanation:

hope it helps