Given the chart of bond energies, calculate the enthalpy change for the reaction below. Show all work

There are 2.96 x 10^23 CN^-1 ions in the sample of 20.9 g of Ca(CN)2.

The first step to solving this problem is to calculate the number of moles of Ca(CN)2 in the sample:

[tex]moles of Ca(CN)2 = mass / molar mass\\moles of Ca(CN)2 = 20.9 g / (40.08 g/mol + 2 * 26.02 g/mol)\\moles of Ca(CN)2 = 0.2458 mol[/tex]

Next, we can use the stoichiometry of the reaction to find the number of moles of CN^-1 ions:

1 mol Ca(CN)2 → 2 mol CN^-1

[tex]moles of CN^{-1} = 2 * moles of Ca(CN)2 \\moles of CN^{-1 }= 2 * 0.2458 mol\\moles of CN^{-1} = 0.4916 mol[/tex]

Finally, we can convert the moles of CN^-1 ions to the number of ions using Avogadro's number:

1 mol CN^-1 → 6.022 x 10^23 ions

number of CN^-1 ions = moles of CN^-1 x Avogadro's number

number of CN^-1 ions = 0.4916 mol x 6.022 x 10^23 ions/mol

number of CN^-1 ions = 2.96 x 10^23 ions

To know more about Avogadro's number, here

brainly.com/question/11907018

#SPJ4

The molarity of the 3% H2O2 solution is 0.0882 M.

To calculate the molarity of a solution, we need to know the moles of the solute (in this case, H2O2) and the volume of the solution.

First, we need to convert the percentage by mass to grams of H2O2:

If the solution is 3% H2O2 by mass, that means there are 3 grams of H2O2 in 100 grams of solution.

So for a certain mass of solution, we can calculate the mass of H2O2 using this proportion:

mass H2O2 / mass solution = 3 g H2O2 / 100 g solution

We can simplify this by assuming a mass of 100 g solution, which gives us:

mass H2O2 = 3 g H2O2 / 100 g solution * 100 g solution = 3 g H2O2

Now we can calculate the moles of H2O2:

The molar mass of H2O2 is 34.01 g/mol.

So the number of moles of H2O2 in 3 grams is:

moles H2O2 = 3 g H2O2 / 34.01 g/mol = 0.0882 mol H2O2

Assuming a volume of 1 liter of solution (which is the standard volume for molarity), we can calculate the molarity of the solution:

Molarity = moles of solute / volume of solution in liters

Molarity = 0.0882 mol / 1 L = 0.0882 M

Therefore, the molarity of the 3% H2O2 solution is 0.0882 M.

To know more about molarity  refer to-

https://brainly.com/question/8732513

#SPJ11

A mixture of 24.59 g zinc and sodium was reacted with H₂SO₄ and then with BaCl₂ to form BaSO₄. The percentage of sodium by mass in the mixture was found to be 16.97%.

The first step is to determine the amount of barium sulfate formed in the reaction. From the reaction equation, we can see that 1 mole of barium sulfate is produced for every mole of zinc in the mixture. Therefore, the amount of barium sulfate formed is:

24.59 g Zn x (1 mol Zn / 65.38 g Zn) x (1 mol BaSO₄ / 1 mol Zn) x (233.39 g BaSO₄ / 1 mol BaSO₄) = 8.80 g BaSO₄

Next, we need to calculate the amount of sodium in the original mixture. We can do this by subtracting the mass of zinc from the total mass of the mixture:

Mixture mass - Zinc mass = Sodium mass

24.59 g - (24.59 g x %Zn) = Sodium mass

We don't know the percent zinc by mass, but we can find it using the mass of barium sulfate formed. The mass percent of sodium in the mixture is then:

%Na = (Sodium mass / Mixture mass) x 100

To find the percent zinc by mass, we can subtract the percent sodium by mass from 100:

%Zn = 100 - %Na

Finally, we can substitute the values we found into the equations and solve for %Na:

8.80 g BaSO₄ x (1 mol BaSO₄ / 233.39 g BaSO₄) x (1 mol Na₂SO₄ / 1 mol BaSO₄) x (142.04 g Na₂SO₄ / 1 mol Na₂SO₄) = 4.04 g Na₂SO₄

Mixture mass - Zinc mass = Sodium mass

24.59 g - (24.59 g x %Zn) = Sodium mass

%Na = (Sodium mass / Mixture mass) x 100

Substituting the values we found:

%Na = (4.04 g / 24.59 g) x 100 = 16.4%

Therefore, the percent sodium by mass in the original mixture is 16.4%.

To know more about the percentage of sodium refer here :

https://brainly.com/question/13777347#

#SPJ11

The volume of dry hydrogen gas at standard atmospheric pressure (which is typically defined as 1 atm or 101.325 kPa) depends on the number of moles of hydrogen gas present. The ideal gas law, PV = nRT, relates the pressure (P), volume (V), number of moles (n), and temperature (T) of an ideal gas. Assuming standard temperature and pressure (0°C and 1 atm), one mole of any ideal gas occupies a volume of 22.4 L. Therefore, to find the volume of dry hydrogen gas at standard atmospheric pressure, we need to know how many moles of hydrogen gas we have.

For example, if we have 1 mole of dry hydrogen gas at standard atmospheric pressure, the volume would be 22.4 L. If we have 0.5 moles of dry hydrogen gas, the volume would be 11.2 L. And so on.

By comparing the mass of one atom of element X to the total mass of 7 hydrogen atoms, we can determine the element represented by X.

The mass of an atom is determined by the total number of protons, neutrons, and electrons in the atom. Protons and neutrons are located in the nucleus of an atom, while electrons are located in the electron cloud surrounding the nucleus.

To illustrate that the mass of an atom of element X is equivalent to the total mass of 7 hydrogen atoms, we first need to determine the mass of an atom of hydrogen and the mass of an atom of element X.

The mass of an atom of hydrogen is approximately 1 atomic mass unit (amu). Therefore, the total mass of 7 hydrogen atoms is 7 amu.

Now, let's assume that the mass of an atom of element X is also 7 amu. This means that the total number of protons, neutrons, and electrons in one atom of element X is equivalent to the total number in 7 hydrogen atoms.

Therefore, the element represented by X is nitrogen. The atomic mass of nitrogen is 14.007 amu, which is equivalent to the total mass of 7 hydrogen atoms.

In summary, the mass of an atom is determined by the total number of protons, neutrons, and electrons in the atom. By comparing the mass of one atom of element X to the total mass of 7 hydrogen atoms, we can determine the element represented by X.

To know more about hydrogen atoms, visit:

https://brainly.com/question/29695801#

#SPJ11

A graduated cylinder is a piece of laboratory equipment used for measuring the volume of liquids, and in this case, it has a capacity of 10 ml.

The gram scale, on the other hand, is a device used for measuring the mass of objects and materials. To begin the experiment, you will need to first measure the mass of the empty graduated cylinder using the gram scale. This will give you a baseline measurement for the weight of the cylinder without any additional substances. You should record this value for future reference.

Next, you will need to fill the graduated cylinder with water up to the 10 ml mark. This can be done by slowly pouring the water into the cylinder until the level reaches the desired volume.

After filling the cylinder with water, you will need to measure the mass of the cylinder and the water together using the gram scale. Subtract the mass of the empty cylinder from the total mass to find the mass of the water.

Finally, you will need to add the six metal paper clips of the same size and material to the cylinder and measure the mass again. This will allow you to determine the difference in mass between the water and the paper clips.

Overall, this experiment demonstrates the use of laboratory equipment to measure the volume and mass of substances, and highlights the importance of accurate measurements in scientific research.

For more about graduated cylinder:

https://brainly.com/question/26173436

#SPJ11

Some things that you use in your life that uses sound energy are car horn honking and car door closing.

Sound is the longitudinal (compression or rarefaction) wave-based transfer of energy through materials.

When a force, such as sound or pressure, causes an item or substance to vibrate, the result is sound energy. Waves of that energy pass through the substance. We refer to the sound waves as kinetic mechanical energy.

Everyday Examples of Sound Energy

•An air conditioning fan.

•An airplane taking off.

•A ballerina dancing in toe shoes.

•A balloon popping.

•The bell dinging on a microwave.

•A boom box blaring.

•A broom swishing.

•A buzzing bee.

To know more about sound energy

https://brainly.com/question/3369385

#SPJ4

The space between particles in a dead star is incredibly vast. A dead star is a celestial object that has exhausted all of its fuel and no longer produces energy.

This means that the intense heat and pressure that once kept the star's particles tightly packed together are no longer present.

As a result, the particles that make up the dead star, such as electrons, protons, and neutrons, are spread out over a vast distance.

In a dead star, the particles are so spread out that they occupy an enormous amount of space. This is because the gravitational force that held the particles together is no longer strong enough to counteract the force of expansion.

The particles are still present in the dead star, but they are separated by distances that are vast beyond human comprehension.

To put it in perspective, the average distance between particles in a dead star is on the order of several light years. This is many trillions of times greater than the distance between particles in a solid, liquid, or gas on Earth.

to know more about dead star refer here:

https://brainly.com/question/1953745#

#SPJ11

16.77 grams of KClO3 must be decomposed to produce 3.45 L of oxygen at STP with a 75.3% yield.

To find out how many grams of KClO3 must be decomposed to produce 3.45 L of oxygen at STP with a 75.3% yield, we'll use the following steps:

1. Convert the volume of oxygen gas to moles using the molar volume of gas at STP (22.4 L/mol).
2. Adjust for the yield percentage.
3. Use the stoichiometry of the balanced equation to find the moles of KClO3.
4. Convert moles of KClO3 to grams using its molar mass.

1. Moles of O2 produced: (3.45 L) / (22.4 L/mol) = 0.154 moles O2
2. Adjust for yield: 0.154 moles / 0.753 = 0.205 moles O2 (theoretical yield)
3. Moles of KClO3: (0.205 moles O2) * (2 moles KClO3 / 3 moles O2) = 0.137 moles KClO3
4. Grams of KClO3: (0.137 moles KClO3) * (122.55 g/mol) = 16.77 g KClO3

So, 16.77 grams of KClO3 must be decomposed to produce 3.45 L of oxygen at STP with a 75.3% yield.

To learn more about yield, refer below:

https://brainly.com/question/30700754

#SPJ11

70 mol CO2 has a volume of 25. 12 L at a pressure of 968 mmHg The temperature of the CO2 in °C is 4.231.1.

A thermometer is a device that quantitatively measures a system's temperature. The word "temperature" refers to the average kinetic energy of an object, which is a type of energy associated with motion and used to define how hot or cold an object is.

Volume = 25.12 L. Pressure= 968 mm Hg.

Number of moles = 70 moles.

P = nRT/V

968 = 70 * T * 0.0821 / 25.12 L

968* 25.12/ 70 * 0.0821 = T

24316.16/ 5.747 = T

4.231.1 = T

Therefore, 70 mol CO2 has a volume of 25. 12 L at a pressure of 968 mmHg The temperature of the CO2 in °C is 4.231.1. The temperature of the CO2 in °C is 4.231.1

To Learn more about Temperature, refer to the link:

https://brainly.com/question/7510619

#SPJ6

The weight of NaCl in a 0.500 L bottle of 2.00 M NaCl solution is 58.44 grams.

To calculate the weight of NaCl in a 0.500 L bottle of 2.00 M NaCl solution, we need to use the formula:

Mass = Moles x Molar mass

First, let's calculate the number of moles of NaCl in the solution:

Moles = Molarity x Volume

Moles = 2.00 mol/L x 0.500 L

Moles = 1.00 mol

The molar mass of NaCl is 58.44 g/mol, so we can now calculate the mass of NaCl in the solution:

Mass = moles x molar mass

Mass = 1.00 mol x 58.44 g/mol

Mass = 58.44 g

Therefore, the weight of NaCl in a 0.500 L bottle of 2.00 M NaCl solution is 58.44 grams.

Learn more about NaCl at

brainly.com/question/4487559

#SPJ4

To form 1.4 mol of ammonia, you need 0.7 mol of nitrogen.

Ammonia is formed by combining nitrogenand hydrogenin a 1:3 ratio, as shown in the balanced chemical equation:

N₂ + 3H₂ → 2NH₃

To determine the amount of nitrogen needed to form 1.4 mol of ammonia, follow these steps:

1. Identify the stoichiometry of the reaction: 1 mol N2 reacts with 3 mol H2 to produce 2 mol NH3.
2. Divide the desired amount of ammonia (1.4 mol) by the stoichiometric coefficient of ammonia (2 mol): 1.4 mol / 2 mol = 0.7.
3. Multiply the result (0.7) by the stoichiometric coefficient of nitrogen (1 mol): 0.7 x 1 mol = 0.7 mol.

Therefore, you need 0.7 mol of nitrogen to form 1.4 mol of ammonia.

To know more about balanced chemical equation click on below link:

https://brainly.com/question/28294176#

#SPJ11

So, it will take 2.5 seconds for the same amount of hydrogen gas to effuse under the same conditions. Your answer is (B) 2.5 s.

Graham's Law states that the rate of effusion of two gases is inversely proportional to the square root of their molar masses:

rate1 / rate2 = √([tex]\frac{M_{2} }{M_{1} }[/tex])

Here, rate1 is the rate of effusion for oxygen, and rate2 is the rate of effusion for hydrogen. [tex]M_{1}[/tex] and [tex]M_{2}[/tex] are the molar masses of oxygen and hydrogen, respectively.

Given that 5 mol of oxygen gas effuses in 10 seconds, the rate1 is 0.5 mol/s.

The molar mass of oxygen is 32 g/mol, and the molar mass of hydrogen (H2) is 2 g/mol.

Now we can plug in the values:
0.5 / rate2 = √(2 / 32)
rate2 = 0.5 / √(2 / 32) ≈ 2 mol/s

time = 5 mol / 2 mol/s = 2.5 s

So, it will take 2.5 seconds for the same amount of hydrogen gas to effuse under the same conditions. Your answer is (B) 2.5 s.

To know more about effusion visit:

https://brainly.com/question/31444163

#SPJ11

To prepare the desired aldehyde with a 6-carbon ring and an aldehyde group on carbon 1, starting with cyclohexanol is a suitable approach.

Cyclohexanol is a 6-carbon ring compound with an alcohol group (OH) attached to carbon 1. To convert the alcohol group into an aldehyde group, the oxidation of the primary alcohol is required.

In this case, the best reagent to use for the oxidation of cyclohexanol to the corresponding aldehyde is PCC (pyridinium chlorochromate).

PCC is a mild oxidizing agent that selectively oxidizes primary alcohols to aldehydes without further oxidation to carboxylic acids. It allows for a controlled oxidation, preventing overoxidation of the aldehyde to a carboxylic acid.

The reaction using PCC as the oxidizing agent can be carried out in one step. The PCC reagent is typically dissolved in a suitable solvent, and the cyclohexanol is added to the reaction mixture.

The reaction proceeds, converting the alcohol group to an aldehyde group while maintaining the 6-carbon ring structure.

By using cyclohexanol as the starting alcohol and PCC as the reagent, you can achieve the desired aldehyde product with a 6-carbon ring and an aldehyde group on carbon 1 in a single step.

This method provides a reliable and efficient way to selectively oxidize the primary alcohol to the corresponding aldehyde without the risk of overoxidation.

To learn more about oxidation, refer below:

https://brainly.com/question/16976470

#SPJ11

The type of bonds that form within a sample of sodium metal, chlorine gas, and sodium chloride crystals are metallic bonds, covalent bonds, and ionic bonds. The electron structure of each substance affects the properties of compounds that it forms in the following ways:

Sodium metal forms metallic bonds, which involve the delocalization of electrons among a lattice of positively charged metal ions. In sodium metal, each atom donates one electron to the shared electron "sea." This electron structure allows metals to conduct electricity and heat, and exhibit malleability and ductility.

Chlorine gas forms covalent bonds, which involve the sharing of electrons between two non-metal atoms. In this case, two chlorine atoms share a pair of electrons to achieve a stable electron configuration. The electron structure of covalent bonds results in compounds with relatively low melting and boiling points, and poor conductivity of electricity and heat.

Sodium chloride crystals form ionic bonds, which involve the transfer of electrons from one atom to another, resulting in the formation of oppositely charged ions. In sodium chloride, sodium loses an electron to chlorine, creating Na⁺ and Cl⁻ ions. The electron structure in ionic compounds leads to high melting and boiling points, and good conductivity when dissolved in water or molten.

These different types of bonds and electron structures significantly influence the properties of the compounds formed.

To learn more about covalent bonds visit:

https://brainly.com/question/3447218

#SPJ11

One of the biggest problems of human impact on the environment is the excessive use of non-renewable resources, such as fossil fuels, which release harmful gases and contribute to climate change.

This problem can be solved by designing a device or process that can harness renewable energy sources, such as solar or wind power, and provide a sustainable alternative to traditional energy sources.

By solving this problem, not only will the environment benefit from reduced carbon emissions, but also the people who rely on these resources. For instance, communities that are vulnerable to the effects of climate change, such as extreme weather conditions, will be better equipped to adapt and withstand these impacts.

The criteria and constraints of designing such a device or process would include factors such as cost, efficiency, scalability, and environmental impact. The solution would need to be cost-effective and efficient, while also being able to provide a significant amount of energy to meet the needs of communities.

Additionally, it would need to be environmentally friendly and have minimal negative impact on ecosystems.

One possible solution could be the development of solar-powered devices that can be used in homes, schools, and businesses to generate electricity. Another solution could be the installation of wind turbines in areas with high wind speeds to generate energy on a larger scale.

Overall, by designing devices or processes that harness renewable energy sources, we can mitigate the negative impacts of non-renewable energy sources on the environment and provide sustainable alternatives for the benefit of both the environment and society.

To know more about non-renewable resources, visit:

https://brainly.com/question/14214221#

#SPJ11

The molarity of the NaOH solution is 1.2 M.

To calculate the molarity of the NaOH solution, first determine the moles of H₂SO₄, then determine the moles of NaOH needed for neutralization, and finally, calculate the molarity of NaOH. Here's a step-by-step explanation:

1. Calculate moles of H₂SO₄: Moles = Molarity × Volume = 1.5 M × 0.040 L = 0.060 moles H₂SO₄

2. Determine moles of NaOH needed for neutralization:

The balanced equation for the reaction is H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O. Based on the stoichiometry, 1 mole of H₂SO₄ reacts with 2 moles of NaOH, so 0.060 moles H₂SO₄ × 2 = 0.120 moles NaOH needed.

3. Calculate molarity of NaOH: Molarity = Moles / Volume = 0.120 moles NaOH / 0.025 L = 1.2 M NaOH solution.

To know more about balanced equation click on below link:

https://brainly.com/question/7181548#

#SPJ11

We can use the ideal gas law to calculate the pressure of the bromine gas in the 1.5 L container. The ideal gas law is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

Since we know the temperature and the volume, we can rearrange the ideal gas law to solve for P, the pressure. We can use the pressure and volume from the first container to calculate the number of moles. Plugging in all of the known values, we get:

P1V1 = nRT

n = P1V1/RT

P2 = (P1V1/RT) * (V2/V1)

Using the values from the question, we get:

P2 = (1.20 atm * 2.65 L)/(0.08206 L·atm·mol-1·K-1 * 298 K) * (1.50 L/2.65 L)

This gives us a pressure of 1.04 atm in the 1.5 L container, which is equal to 1040 kPa.

Know more about Ideal gas law here

https://brainly.com/question/28257995#

#SPJ11

The elevation in the boiling point when 84g of urea is dissolved in 1400g of chloroform is 3.63 °C.

To determine the elevation in the boiling point when 84g of urea (CH4N2O) is dissolved in 1400g of chloroform, you will need to use the formula for calculating the boiling point elevation:

ΔTb = Kb * molality * i, where ΔTb is the boiling point elevation, Kb is the molal boiling point elevation constant (for chloroform, not benzene), molality is the moles of solute per kilogram of solvent, and i is the van't Hoff factor.

Step 1: Calculate the molality.
Molality = moles of solute / mass of solvent (in kg)
The molar mass of urea (CH4N2O) is 12 + 4 + 28 + 16 = 60 g/mol.
Moles of urea = 84g / 60 g/mol = 1.4 moles
Mass of chloroform = 1400g = 1.4 kg
Molality = 1.4 moles / 1.4 kg = 1 mol/kg

Step 2: Determine the van't Hoff factor (i).
Urea does not dissociate in solution, so its van't Hoff factor is 1.

Step 3: Calculate the boiling point elevation.
You provided the Kb for benzene (2.67 °C/m), which cannot be used for chloroform. Kb for chloroform is 3.63 °C/m.
ΔTb = Kb * molality * i
ΔTb = 3.63 °C/m * 1 mol/kg * 1
ΔTb = 3.63 °C

The elevation in the boiling point when 84g of urea is dissolved in 1400g of chloroform is 3.63 °C.

To know more about boiling point, visit:

https://brainly.com/question/2153588#

#SPJ11

The dissolving of sodium hydroxide is an endothermic process.

The given thermochemical equation shows that the dissolution of NaOH is an endothermic process. The negative value of the enthalpy change (AH) indicates that energy in the form of heat is absorbed during the process of dissolving NaOH. This means that the system requires energy to break the ionic bonds between NaOH molecules and to separate them into their constituent ions, Na+ and OH-. Option A is incorrect as potential energy is not mentioned in the equation, and option D is not related to the given equation. Option C is not necessarily true, as the temperature change of the solution depends on the amount of NaOH dissolved and the specific heat of the solution. Overall, we can conclude that the dissolution of NaOH is an endothermic process, where heat is absorbed by the system, and the enthalpy of the system increases.

Know more about Endothermic Process here:

https://brainly.com/question/29555731

#SPJ11

71.875 grams of NO2 can be produced when 25.0 g of oxygen reacts in this reaction.

When 25.0 grams of oxygen reacts, the amount of NO2 produced can be determined by using stoichiometry. The balanced chemical equation for the reaction is:

2 NO + O2 → 2 NO2

From the equation, it can be seen that for every one mole of O2, two moles of NO2 are produced. Therefore, the first step is to convert the given mass of oxygen into moles. The molar mass of oxygen is 32 g/mol, so:

25.0 g O2 ÷ 32 g/mol = 0.78125 mol O2

Since the stoichiometry of the reaction shows that two moles of NO2 are produced for every one mole of O2, the next step is to calculate the number of moles of NO2 produced:

0.78125 mol O2 × 2 mol NO2/1 mol O2 = 1.5625 mol NO2

Finally, the mass of NO2 can be calculated by multiplying the number of moles of NO2 by its molar mass, which is 46 g/mol:

1.5625 mol NO2 × 46 g/mol = 71.875 g NO2

Therefore, 71.875 grams of NO2 can be produced when 25.0 g of oxygen reacts in this reaction.

To know more about oxygen, visit:

https://brainly.com/question/13370320#

#SPJ11

The mass of helium present in the blimp is 644 kg.

To calculate the mass of helium present in the blimp, we can use the ideal gas law:

PV = nRT

where:

We can rearrange this equation to solve for the number of moles of gas:

n = PV/RT

Substituting the given values, we get:

n = (1.2 atm) x [tex](5.74 * 10^6 L)[/tex]/ [(0.08206 L·atm/K·mol) x (25°C + 273.15)]

n = 1.61 x [tex]10^5[/tex] moles of helium

Now, to calculate the mass of helium present in the blimp, we can use the molar mass of helium:

mass = n x molar mass

mass = (1.61 x [tex]10^5 mol[/tex]) x (4.00 g/mol)

mass = 644 kg

To know more about ideal gas law, here

brainly.com/question/28257995

#SPJ4

--The complete Question is, If the Goodyear Blimp is filled with helium gas at a pressure of 1.2 atm and a temperature of 25°C, what is the mass of helium present in the blimp? (Assume ideal gas behavior and a molar mass of 4.00 g/mol for helium.) --

31.45 g of dilute trioxonitrate (V) acid containing 10% W/W of pure acid will be required to dissolve 2.5 g of chalk.

We need to use balanced chemical equation of the reaction between calcium carbonate and trioxonitrate (V) acid to determine the number of moles of acid required to dissolve 2.5 g of chalk.

[tex]CaCO_3 + 2HNO_3 → Ca(NO_3)_2 + CO_2 + H_2O[/tex]

From the equation, one mole of [tex]CaCO_3[/tex] reacts with two moles of [tex]HNO_3[/tex]. The molar mass of CaCO3 is 100.09 g/mol.

[tex]Number\ of\ moles\ of\ CaCO_3 = 2.5 g / 100.09 g/mol = 0.02498 mol[/tex]

[tex]Number\ of\ moles\ of HNO_3 = 2 * 0.02498 = 0.04996 mol[/tex]

Now, we can calculate the mass of dilute trioxonitrate (V) acid containing 10% W/W of pure acid required to provide 0.04996 mol of [tex]HNO_3[/tex].

Assuming the density of the dilute trioxonitrate (V) acid is 1.1 g/cm3, the mass of the acid required will be:

[tex]Mass\ of\ acid = (0.04996 mol * 63.01 g/mol) / 0.1 = 31.45 g[/tex]

To know more about calcium carbonate, here

brainly.com/question/13565765

#SPJ4

To calculate the molarity of a solution, we need to know the number of moles of solute and the volume of the solution in liters.

a. 39 M solution with 0.70 M KOH:

Number of moles of KOH = 0.70 moles/Liter x 2.5 Liters = 1.75 moles

Volume of solution = 2.5 Liters

Molarity of solution = Number of moles of solute / Volume of solution = 1.75 moles / 2.5 Liters = 0.70 M

b. 1 A solution:

This question is incomplete, as it is not specified what solute is dissolved in the solution. Therefore, it is not possible to calculate the molarity of the solution without this information.

c. 4.4 M solution of ABOOOO:

It is not possible to calculate the molarity of this solution without more information about the solute dissolved in the solution. The chemical formula or name of the solute is needed to determine the number of moles present in the solution.

To know more about Molarity refer to-

https://brainly.com/question/16587536

#SPJ11

The momentum of the car is 32,500 kg m/s, and the total momentum of the collision is 40,000 kg m/s.

The momentum of an object is calculated by multiplying its mass by its velocity. In the case of the car, its mass is 1,300 kg, and it travels at a speed of 25 m/s. To find the car's momentum, we can use the formula:

momentum = mass × velocity

Car's momentum = 1,300 kg × 25 m/s = 32,500 kg m/s

Now, let's find the momentum of the tractor. The tractor weighs 1,500 kg and travels at 5 m/s. Using the same formula:

Tractor's momentum = 1,500 kg × 5 m/s = 7,500 kg m/s

To find the total momentum of the collision, we simply add the momentum of the car and the tractor:

Total momentum = Car's momentum + Tractor's momentum
Total momentum = 32,500 kg m/s + 7,500 kg m/s = 40,000 kg m/s

In conclusion, the momentum of the car is 32,500 kg m/s, and the total momentum of the collision is 40,000 kg m/s.

To know more about momentum, visit:

https://brainly.com/question/30677308#

#SPJ11

The metal spoon is hotter than the wooden spoon due to its higher mass,

Heat is the energy transferred from one body to another due to a temperature difference. The amount of heat transferred is proportional to the mass of the object and its specific heat capacity. Specific heat capacity is the amount of heat required to raise the temperature of one unit mass of the substance by one degree Celsius.

In this scenario, the two spoons are of equal size, but the metal spoon has a higher mass and specific heat capacity compared to the wooden spoon. When both spoons are placed in the boiling water, heat flows from the water to the spoons until they reach the same temperature as the water.

However, due to the higher mass and specific heat capacity of the metal spoon, it requires more heat energy to raise its temperature compared to the wooden spoon. As a result, the metal spoon takes a longer time to reach the same temperature as the wooden spoon.

Additionally, metals are better conductors of heat compared to wood. Therefore, the metal spoon conducts the heat more efficiently from the boiling water to the handle, making it hotter than the wooden spoon.

Overall, the metal spoon is hotter than the wooden spoon due to its higher mass, higher specific heat capacity, and better heat conduction properties. This is why it would be more painful to grab.

The volume (in liters) of NO₂ at STP that can be produced when 25 g of Cu react with concentrated nitric acid, HNO₃ is 17.6 liters

First, we shall determine the mole in 25 g of Cu. Details below:

Mole = mass / molar mass

Mole of Cu = 25 / 63.55

Mole of Cu = 0.393 mole

Next, we shall determine the mole of of NO₂ produced from the reaction. Details below:

Cu + 4HNO3 -> Cu(NO₃)₂ + 2NO₂ + 2H₂O

From the balanced equation above,

1 mole of Cu reacted to produced 2 moles of NO₂

Therefore,

0.393 mole of Si will react to produce = 0.393 × 2 = 0.786 mole of NO₂

Finally, we shall obtain the volume of NO₂ produced at STP. Details below

At STP,

1 mole of NO₂ = 22.4 Liters

Therefore,

0.786 moles of NO₂ = 0.786 × 22.4

0.786 moles of NO₂ = 17.6 liters

Thus, we can conclude that the volume of NO₂ produced is 17.6 liters

Learn more about volume:

https://brainly.com/question/225322

#SPJ1

The answer is D) 15.5 grams.

To solve this problem, we need to use stoichiometry and the given balanced chemical equation. First, we need to determine the limiting reagent by calculating the number of moles of NH3 and O2:

9.75 g [tex]NH_3[/tex] x (1 mol  [tex]NH_3[/tex]/17.031 g  [tex]NH_3[/tex]) = 0.571 mol  [tex]NH_3[/tex]
Excess O2, so we do not need to calculate.

Now, we can use the mole ratio from the balanced equation to determine the moles of H2O produced:

0.571 mol  [tex]NH_3[/tex] x (6 mol H2O/4 mol  [tex]NH_3[/tex]) = 0.857 mol H2O

Finally, we can convert the moles of H2O to grams:

0.857 mol H2O x (18.015 g H2O/1 mol H2O) = 15.44 g H2O

Therefore, the answer is D) 15.5 grams.

To know more about balanced equations:

https://brainly.com/question/30485389

#SPJ11

In redox reactions, electrons are transferred from one species to another. If the response is spontaneous, strength is released, that could then be used to do beneficial work.

To harness this strength, the response have to be break up into separate 1/2 of reactions: the oxidation and reduction reactions. The reactions are placed into one of a kind bins and a twine is used to pressure the electrons from one aspect to the other. In doing so, a Voltaic/ Galvanic Cell is created. An electrode is strip of metallic on which the response takes region. In a voltaic cell, the oxidation and discount of metals takes place on the electrodes. There are electrodes in a voltaic cell, one in every 1/2 of-cell. The cathode is wherein discount takes region and oxidation takes region on the anode. Through electrochemistry, those reactions are reacting upon metallic surfaces, or electrodes. An oxidation-discount equilibrium is mounted among the metallic and the materials in solution. When electrodes are immersed in an answer containing ions of the equal metallic, it's far referred to as a 1/2 of-cell.

To learn more about redox reaction check the link below-

https://brainly.com/question/21851295

#SPJ4

The quantum efficiency (QE) of the radiation of 2530 amstrong incidents is approximately 3.47 x [tex]10^8[/tex].

We have,

Quantum efficiency (QE) is a measure of the number of molecules undergoing a specified reaction per photon absorbed.

In this case, you want to calculate the quantum efficiency based on the given data.

Quantum Efficiency (QE) is given by the formula:

QE = (Number of molecules decomposed) / (Number of photons absorbed)

Given:

Number of molecules decomposed = 1.85 × 10^-2 moles

Number of photons absorbed = Energy absorbed / Energy per photon

The energy of a photon (E) is given by Planck's equation:

E = hc / λ

Where:

h = Planck's constant = 6.626 × 10^-34 J·s

c = Speed of light = 3 × 10^8 m/s

λ = Wavelength of radiation = 2530 Å = 2530 × 10^-10 m

Calculate the energy per photon using the wavelength:

E = (6.626 × [tex]10^{-34}[/tex] J·s * 3 × [tex]10^8[/tex] m/s) / (2530 × [tex]10^{-10}[/tex] m)

= 0.007856 x [tex]10^{-34 + 8 + 10[/tex]

= 0.007856 x [tex]10^{-16}[/tex] J

Now, calculate the energy absorbed:

Energy absorbed = 1000 cal = 1000 * 4.184 J (since 1 cal = 4.184 J)

Number of photons absorbed = Energy absorbed / Energy per photon

Calculate the quantum efficiency using the given formula:

QE = (Number of molecules decomposed) / (Number of photons absorbed)

QE = (1.85 × [tex]10^{-2}[/tex] moles) / (Number of photons absorbed)

Substitute the value of the Number of photons absorbed:

QE = (1.85 × [tex]10^{-2}[/tex] moles) / [(1000 * 4.184 J) / (0.007856 x [tex]10^{-16}[/tex] J)]

QE = (1.85 × [tex]10^{-2}[/tex] moles) / (532586.56 x [tex]10^{16}[/tex] J)

QE = 0.000003474 x [tex]10^{14}[/tex]

QE ≈ 3474 × [tex]10^5[/tex]

QE = 3.47 x [tex]10^8[/tex]

Therefore,

The quantum efficiency (QE) is approximately 3.47 x [tex]10^8[/tex].

Learn more about quantum efficiency here:

https://brainly.com/question/2187279

#SPJ12