A helium-filled balloon of the type used in long-distance flying contains 1.5 ✕ 107 L of helium. Let us say you fill the balloon with helium on the ground where the pressure is 837 mm Hg and the temperature is 18.4°C. When the balloon ascends to a height of 6 miles where the pressure is only 707. mm Hg and the temperature is -31°C, what volume is occupied by the helium gas? Assume the pressure inside the balloon matches the external pressure.

To find the pH of the solution, we need to first calculate the concentration of H+ ions in the solution using the following equation:

[H+] = (moles of HCl) / (volume of solution in liters)

First, let's convert the mass of HCl to moles:

moles of HCl = mass / molar mass = 4.0 g / 36.46 g/mol = 0.1096 moles

Next, let's convert the volume to liters:

475 mL = 0.475 L

Now we can calculate the concentration of H+ ions:

[H+] = 0.1096 moles / 0.475 L = 0.2306 M

Finally, we can calculate the pH using the equation:

pH = -log[H+]

pH = -log(0.2306) = 0.637

Therefore, the pH of the solution is approximately 0.637.

The mathematical variable is not a standard term in experimental design and is not typically used to describe variables in scientific experiments.

The variable that is unknown until the experiment is performed is typically the responding variable.

The responding variable is the variable that is observed and measured during the experiment, and its value changes in response to the manipulated variable. In contrast, the manipulated variable is the variable that is intentionally changed by the researcher to observe its effect on the responding variable.

The controlled variable is the variable that is kept constant throughout the experiment to ensure that any changes in the responding variable are due to the manipulated variable and not due to other factors. The mathematical variable is not a standard term in experimental design and is not typically used to describe variables in scientific experiments.

To know more about variable, visit:

https://brainly.com/question/17344045

#SPJ1

Answer:

two

Explanation:

the answer is two

option b

The number of mole of H₂O₂ that were composed by the catalyst (10 mL of potassium iodine) is 0.0396 mole

From the question given above, the following data were obtained

Molarity and number of mole of as substance are related according to the following equation

Molarity = number of mole / Volume

Inputting the given parameters, the number of mole H₂O₂ solution can be obtain as shown below:

0.7959 = number of mole of H₂O₂ solution / 0.0498

Cross multiply

Number of mole of H₂O₂ solution = 0.7959 × 0.0498

Number of mole of H₂O₂ solution = 0.0396 mole

Thus, the number of moles of H₂O₂ solution composed is 0.0396 mole

Learn more about number of mole:

https://brainly.com/question/20522500

#SPJ1

The limiting reagent for the reaction between 0.150 g of salicylic acid and 0.350 mL of acetic anhydride is salicylic acid, C₇H₆O₃

First, we shall determine the mass of the acetic anhydride. Details below:

Mass = density × volume

Mass of acetic anhydride, C₄H₆O₃ = 1.082 × 0.350

Mass of acetic anhydride, C₄H₆O₃ = 0.3787 g

Finally, we shall determine the limiting reagent. Details below:

C₇H₆O₃ + C₄H₆O₃ -> C₉H₈O₄ + CH₃COOH

From the balanced equation above,

138.121 g of C₇H₆O₃ reacted with 102.09 g of C₄H₆O₃

Therefore,

0.150 g of C₇H₆O₃ will react with = (0.150 × 102.09) / 138.121 = 0.11089 g of C₄H₆O₃

We can see from the above that only 0.11089 g of acetic anhydride, C₄H₆O₃ out of 0.3787 g is needed to react with 0.150 g of salicylic acid, C₇H₆O₃

Thus, the limiting reagent is salicylic acid, C₇H₆O₃

Learn more about limiting reactant:

https://brainly.com/question/11587316

#SPJ1

when pressure of the reactant mixture at the equilibrium and with the fewer moles in reactant side will be increased and the equilibrium will be shift to the side in the reaction where the fewer moles of the gas.

According to the Le Chartelier, when the reaction is in the equilibrium phase and the one of the constraints which will affect the rate of the reactions, and the equilibrium will be shift to the cancel out  this effect that the constraint had.

Therefore, If the pressure of the system or the reaction is in the equilibrium is change, the equilibrium of the reaction will be change that is depending on the side of the reaction with the highest number of the molecules.

To learn more about equilibrium here

https://brainly.com/question/31328735

#SPJ1

Answer: Cells

Explanation:

a. We will be able to release 37,827 kJ. b. You can cook a maximum of 19 hamburgers without exceeding the limit of 0.750 kg of carbon dioxide.

a. We need to use the balanced chemical equation and the enthalpy change of the reaction.

Therefore, moles  [tex]CO_2[/tex] produced are[tex]0.750 kg / 44.01 g/mol = 17.03 mol.[/tex]

The enthalpy change of the reaction is -2220.1 kJ/mol. Thus, the maximum number of kilojoules that can be released is:

[tex]\Delta Hrxn * moles of[/tex] [tex]CO_2[/tex] = [tex]-2220.1 kJ/mol * 17.03 mol = -37,827 kJ[/tex]

We need to reverse the sign of the answer, giving us 37,827 kJ.

b. If it requires 1900 kJ to cook one hamburger, we can divide the maximum number of kilojoules that can be released by the energy required to cook one hamburger:

37,827 kJ / 1900 kJ/hamburger = 19.91 hamburgers

To know more about enthalpy, here

brainly.com/question/16720480

#SPJ1

The mass of Fe₂O₃ produced is 101.9 g.

The balanced chemical equation for the combustion of iron pyrite is:

4FeS₂(s) + 11O₂(g) → 2Fe₂O3(s) + 8SO₂(g)

From the equation, 11 moles of oxygen are required to produce 2 moles of Fe₂O₃. Convert the given volume of oxygen to moles:

n(O2) = PV/RT = (2.97 atm)(74 L)/(0.0821 L·atm/mol·K)(161 + 273 K) = 3.51 mol

Since the reaction requires 11 moles of O₂ for every 2 moles of Fe₂O₃, calculate the moles of Fe₂O₃ produced:

n(Fe₂O₃) = (2/11) × n(O₂) = (2/11) × 3.51 mol = 0.638 mol

Finally, use the molar mass of Fe₂O₃ to convert moles to grams:

m(Fe₂O₃) = n(Fe₂O₃) × M(Fe₂O₃) = 0.638 mol × 159.69 g/mol = 101.9 g

Therefore, the mass of Fe₂O₃ produced is 101.9 g.

Find out more on iron pyrite here: https://brainly.com/question/12949345

#SPJ1

There are 0.25 moles of HCl present in 250 mL of 1.0 M HCl.

We have to calculate the number of moles of HCl present in some mL of 1.0M HCl.  A mole is defined as the amount of substance in a system that contains as many elementary entities as there are atoms in 0.012 kg of carbon 12. We represent mole by the symbol 'mol'. Now, we will see how to calculate the number of moles.

We can calculate the number of moles of a substance using the following expression;

Molarity = no of moles of an element/volume

According to this question, we were given 250. mL of 1.0 M HCl. The number of moles will be calculated by the formula as follows;

no of moles of HCl = 0.250L × 1.0M

no of moles of HCl = 0.250 moles.

Therefore, 0.25 moles are present in 250 mL of 1.0 M HCl.

To learn more about moles:

brainly.com/question/31039725

#SPJ1

Photosynthesis is the process by which plants and some microorganisms convert light energy into chemical energy. It is a complex process that occurs in two stages: the light-dependent reactions and the light-independent reactions (also known as the Calvin cycle). 

The light-dependent reactions (Photosynthesis)occur in the thylakoid membranes of chloroplasts and involve the absorption of light by pigments such as chlorophyll. This energy is then used to generate ATP and NADPH, which are used in the next stage of the process. The light-independent reactions occur in the stroma of chloroplasts and involve the fixation of carbon dioxide into organic molecules using the energy generated in the previous stage. 

Learn more about the Photosynthesis here

https://brainly.com/question/29764662

#SPJ1

The electrons can be arranged in increasing order of energy as follows: (1,0,0,-1/2) < (2,1,0,-1/2) < (2,1,0,-1/2) < (3,1,1,1/2) < (3,2,0,-1/2).

The energy of an electron is determined by its principal quantum number (n), azimuthal quantum number (l), magnetic quantum number (m), and spin quantum number (s). The electrons can be arranged in increasing order of energy by comparing their quantum numbers.

Starting with the lowest energy electron, we have the electron with quantum numbers (1,0,0,-1/2). This electron has the lowest principal quantum number, indicating that it occupies the lowest energy level.

It also has an azimuthal quantum number of zero, which corresponds to the s subshell, and a negative spin quantum number, indicating that its spin is aligned opposite to the magnetic field.

Next, we have the two electrons with quantum numbers (2,1,0,-1/2). These electrons have the same principal quantum number, indicating that they occupy the same energy level.

They both have an azimuthal quantum number of one, which corresponds to the p subshell, and a negative spin quantum number.

Following these electrons, we have the electron with quantum numbers (3,1,1,1/2). This electron has a higher principal quantum number than the previous electrons, indicating that it occupies a higher energy level.

It has an azimuthal quantum number of one, which corresponds to the p subshell, and a positive spin quantum number.

Finally, we have the electron with quantum numbers (3,2,0,-1/2). This electron has the highest azimuthal quantum number of all the electrons, indicating that it occupies the d subshell. It also has a negative spin quantum number.

Therefore, the electrons can be arranged in increasing order of energy as follows: (1,0,0,-1/2) < (2,1,0,-1/2) < (2,1,0,-1/2) < (3,1,1,1/2) < (3,2,0,-1/2).

Learn more about electrons here:

brainly.com/question/1255220

#SPJ1

The alpha decay of radon is shown by;

222/86Rn ----> 218/84Po + 4/2He

Radon undergoes alpha decay by emitting an alpha particle, which consists of two protons and two neutrons.

Let us note that when there is an alpha decay, the parent nucleus would loose a helium nucleus and the daughter nucleus would less than than the parent in mass by four units and less than the parent in charge by 2 units and this would satisfy the mass and charge balance of the equation. The decay equation is; 222/86Rn ----> 218/84Po + 4/2He

Learn more about alpha decay:https://brainly.com/question/55665

#SPJ1

Missing parts;

Use the equation to complete the activity.

219 86Rn → 215 84Po + a

The nuclear equation shows the transmutation of a form of radon into polonium and an alpha particle. In one to two sentences, explain whether or not the reaction is balanced.

a. The mass of Cr2O3 is 0.559 g Cr2O3 is the maximum amount of  Cr2O3 produced.

b.The limiting reactant is  Cr(NO3)3  because it produces less moles of Cr2O3 than Na2O.

c. The percent yield is 84%.

The balanced equation is shown below:

2 Cr(NO3)3 + 3 Na2O → Cr2O3 + 6 NaNO3

moles of Cr(NO3)3 = 1.75 g / 238.01 g/mol = 0.00735 mol

moles of Na2O = 1.75 g / 61.98 g/mol = 0.0282 mol

moles of Cr2O3 = (0.00735 mol Cr(NO3)3) × (1 mol Cr2O3 / 2 mol Cr(NO3)3) = 0.00368 mol Cr2O3 (theoretical yield)

mass of Cr2O3 = (0.00368 mol Cr2O3) × (151.99 g/mol) = 0.559 g Cr2O3

The percent yield can be calculated by dividing the actual yield by the theoretical yield and multiplying by 100%:

percent yield = (actual yield / theoretical yield) × 100%

percent yield = (0.455 g / 0.559 g) × 100% = 81.4%

Learn more about theoretical yield at: https://brainly.com/question/31082729

#SPJ1

The decay of Xenon-146 follows an exponential decay model, where the amount of Xenon-146 remaining after time t is given by:

N(t) = N0 * (1/2)^(t/T)

where N0 is the initial amount of Xenon-146, T is the half-life of Xenon-146, and t is the time that has passed.

We are given that N0 = 416 g, N(t) = 13 g, and T = 37 hours. We can solve for t as follows:

N(t) = N0 * (1/2)^(t/T)

13 = 416 * (1/2)^(t/37)

Taking the natural logarithm of both sides:

ln(13) = ln(416) + (t/37) * ln(1/2)

Solving for t:

t = 37 * [ln(13/416) / ln(1/2)]

t ≈ 111.2 hours

Therefore, the Xenon-146 has been decaying for approximately 111.2 hours.

25.0 g of CaCO3 will produce 11.0 g of CO2. Mass is an intrinsic property of an object, meaning it does not depend on the object's location or the presence of other objects.

What is Mass?

Mass is a measure of the amount of matter in an object. It is a scalar quantity and is typically measured in units such as grams (g) or kilograms (kg). Mass is not the same as weight, which is a measure of the force exerted on an object due to gravity.

The balanced chemical equation for the decomposition of calcium carbonate (CaCO3) is:

CaCO3 → CaO + CO2

According to the equation, 1 mole of CaCO3 produces 1 mole of CO2. The molar mass of CaCO3 is 100.09 g/mol, which means that 1 mole of CaCO3 has a mass of 100.09 g.

To calculate the mass of CO2 produced from 25.0 g of CaCO3, we first need to convert the mass of CaCO3 to moles:

25.0 g CaCO3 x (1 mol CaCO3/100.09 g CaCO3) = 0.2498 mol CaCO3

Since 1 mole of CaCO3 produces 1 mole of CO2, we know that 0.2498 mol of CaCO3 will produce 0.2498 mol of CO2.

To convert the moles of CO2 to mass, we can use the molar mass of CO2, which is 44.01 g/mol:

0.2498 mol CO2 x 44.01 g/mol = 11.0 g CO2

Learn more about Mass from the given link

https://brainly.com/question/86444

#SPJ9

Quantifying chemical reactions is essential in understanding the stoichiometry of a reaction, predicting product formation, and optimizing product yield in industrial applications. Stoichiometric coefficients and limiting reactants are two important tools used in this process.

Quantifying chemical reactions involves measuring the amount of reactants and products involved in a chemical reaction. This is important in determining the stoichiometry of the reaction, which refers to the relative amounts of reactants and products involved. Stoichiometry is a crucial concept in chemistry because it allows scientists to predict the amount of product that will be formed from a given amount of reactant, or vice versa.
One way to quantify chemical reactions is through the use of stoichiometric coefficients. These coefficients represent the number of moles of each reactant and product involved in the reaction. For example, the balanced chemical equation for the reaction between hydrogen gas and oxygen gas to form water is:
[tex]2H2 + O2 → 2H2O[/tex]
This equation tells us that two moles of hydrogen gas react with one mole of oxygen gas to form two moles of water. The stoichiometric coefficients can be used to determine the mass of each reactant and product involved in the reaction, using the molar masses of each substance.
Another way to quantify chemical reactions is through the use of limiting reactants. A limiting reactant is the reactant that is completely consumed in a reaction, limiting the amount of product that can be formed. The amount of product formed will be determined by the amount of limiting reactant present. This concept is important in industrial chemistry, where maximizing product yield is often the goal.

For more such questions on chemical reactions

https://brainly.com/question/29470602

#SPJ11

Answer:

2.000 moles.

Explanation:

To solve this question, we need to use the formula:

n = V / VM

where n is the number of moles, V is the volume of water in milliliters, and VM is the molar volume of water in milliliters per mole. The molar volume of water at standard temperature and pressure (STP) is 18.02 mL/mol. Plugging in the given value, we get:

n = 36.030 mL / 18.02 mL/mol n = 2.000 moles

The answer is 2.000 moles.

Answer:

649.090

Explanation:

Under the specified conditions, the cell potential of the given galvanic cell is 3.11 V.

The standard reduction potentials for the half-reactions involved in the cell reaction are:

Ti²⁺(aq) + 2e- ⇆ Ti(s) E° = -1.63 V

Au³⁺(aq) + 3e- ⇆ Au(s) E° = +1.50 V

The cell potential (Ecell) is given by:

Ecell = E°cathode - E°anode

where E°cathode = standard reduction potential of the cathode (reduction half-reaction) and E°anode = standard reduction potential of the anode (oxidation half-reaction).

In this case, Ti²⁺ is oxidized (anode) and Au³⁺ is reduced (cathode). Therefore:

E°anode = -1.63 V

E°cathode = +1.50 V

So, Ecell = +1.50 V - (-1.63 V) = +3.13 V

The Nernst equation can be used to calculate the cell potential (Ecell) under non-standard conditions:

Ecell = E°cell - (RT/nF) ln(Q)

where R = gas constant (8.314 J/(molK)), T = temperature in Kelvin (25 °C = 298 K), n = number of electrons transferred in the balanced equation (3 in this case), F = Faraday constant (96,485 C/mol), and Q = reaction quotient.

For the given concentrations:

[Ti²⁺] = 0.00140 M

[Au³⁺] = 0.887 M

The reaction quotient Q can be written as:

Q = ([Ti²⁺]³/[Au³⁺]²)

Substituting the values into the Nernst equation:

Ecell = E°cell - (RT/nF) ln([Ti²⁺]³/[Au³⁺]²)

Ecell = 3.13 V - (8.314 J/(molK) × 298 K / (3 × 96,485 C/mol)) ln(0.00140³/0.887²)

Ecell = 3.13 V - 0.0217 V

Ecell = 3.11 V

Therefore, the cell potential for the given galvanic cell under the given conditions is 3.11 V.

Find out more on cell potential here: https://brainly.com/question/10470515

#SPJ1

Answer:

D is correct.(1s22s22p63s2)

15.66% of the first cation is still in solution as the second cation is just beginning to precipitate.

One of the three main nutrients that are most frequently used in fertilisers is phosphorous, which is obtained from processing phosphate rock (the other two are nitrogen and potassium).

You can also make phosphoric acid into phosphoric acids, which are utilised in everything from food and skincare to animal feed and electronics. Over the course of millions of years, organic matter accumulates to form the sedimentary rock known as phosphate.

When [tex]Na_{3}Po_{4}[/tex] added to the solution of Ca and Mg, [tex]Ca_{3}(Po_{4})_{2}[/tex] and [tex]Ag_{3}Po_{4}[/tex] are formed.

Ksp of [tex]Ca_{3}(Po_{4})_{2} = 2.07*10^{-33}[/tex]

Ksp of [tex]Ag_{3}Po_{4} = 0.09*10^{-17}[/tex]

Concentration of [tex][Ca^{2+}][/tex] = 0.040 M

Concentration of [tex][Ag^{+}][/tex] = 0.0990 M

[tex]Ag_{3} Po_{4} - > 3Ag^{+} + Po_{4}^{3-}[/tex]

Ksp = [tex][Ag^{+}]^{3} [Po4^{3-}][/tex]

[tex]0.09*10^{-17} = (0.099)^{3} [Po_{3-}][/tex]

[tex][Po_{3-}] = 9.16*10^{-14}M[/tex]

[tex]Ksp = [Ca^{2+}]^{3} [Po_{3-}][/tex]

[tex]2.07*10^{-33} = (0.040)^{3} [Po_{4}^{3-}]^{2}[/tex]

[tex][Po_{4}^{3-}] = 5.68*10^{-15} M[/tex]

[tex][Po_{4}^{3-}][/tex] is smaller in [tex]Ca_{3}(Po_{4})_{2}[/tex]

[tex]Ca_{3}(Po_{4})_{2}[/tex] will start precipitating first

[tex]Ksp = [Ca^{2+}]^{3} [Po_{4}^{3-}]^{2}[/tex]

[tex]2.07*10^{-33} = [Ca^{2+}]^{3} (9.16*10^{-14})^{2}[/tex]

[tex][Ca^{2+}] = 6.27*10^{-3} M[/tex]

[tex]\%\ of\ Ca^{2+}[/tex] remaining [tex]= 6.27*10^{-3}/0.040 * 100[/tex]

= 15.66 %

To know more about phosphate, visit:

https://brainly.com/question/29231164

#SPJ1

The complete equation for the neutralization reactions for the LiOH + HNO₂ is as :

LiOH  +  HNO₂ ---->  LiNO₂  +  H₂O

The Neutralization reaction is the reaction as in the chemical reaction in which the acid will reacts with the base and to produce the salt and the water molecule. The general equation of the chemical reaction is as :

HX  +  BOH  -->  BX  + H₂O

The reaction with the LiOH and the HNO₂ is :

LiOH  +  HNO₂ ---->  LiNO₂  +  H₂O

There is the combination of the H⁺ ions and OH⁻ ions that will form the water.

To learn more about neutralization reactions here

https://brainly.com/question/28970253

#SPJ1

Methemoglobinemia was caused by contaminated well water and a genetic predisposition in the population of Troublesome Creek, KY.

Methemoglobinemia was detached to the Problematic Rivulet area of KY in view of the novel blend of ecological variables and hereditary inclination in the populace. The issue was brought about by the utilization of well water polluted with elevated degrees of nitrate and nitrite, which can cause the arrangement of methemoglobin in the blood. The populace in this space was to a great extent slipped from a little gathering of trailblazers who settled there during the 1800s, which might have added to a higher pervasiveness of the hereditary characteristic that inclines people toward the issue. The particular mix of hereditary defenselessness and ecological openness in this populace probably prompted the secluded flare-up of methemoglobinemia around here.

To learn more about Methemoglobinemia, refer:

https://brainly.com/question/31558236

#SPJ1

The statement that is true about the reactions is

In Reactions A and B, the participating atoms preserve their elemental identity despite losing electrons (in Reaction A) or protons and neutrons (in Reaction B). This can give rise to distinct isotopes or ions of the same element while preserving its fundamental attributes.

The statements concerning energy production aren't necessarily accurate or linked with the reaction's traits. Energy output depends on many variables, such as specific reactants involved and their conditions during reactions.

Learn more about reactions  at

https://brainly.com/question/25769000

#SPJ1

The volume of a 1.0 M solution that has 4.0 moles of solute is 4.0 liters.

A mole is a unit of measurement used in chemistry to represent the quantity of a chemical.

We can use the following formula to get the volume of a 1.0 M solution containing 4.0 moles of solute:

moles of solute = molarity x volume of solution

To determine the volume of the solution, we can rearrange this formula as follows:

Volume of solution = molarity / moles of solute.

By entering the specified values, we obtain:

4.0 moles / 1.0 M is the solution's volume.

Solution volume = 4.0 L

Therefore, the volume of a 1.0 M solution that has 4.0 moles of solute is 4.0 liters.

Learn more about mole here : brainly.com/question/15356425

#SPJ1

Initially, there was a 266.8 mm Hg pressure.

solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas sample. The formula is:
(P1 × V1) ÷ (T1) = (P2 × V2) ÷ (T2)
where P1 and P2 are the initial and final pressures, V1 and V2 are the initial and final volumes, and T1 and T2 are the initial and final temperatures.

We are given that:
- V1 = 436 mL
- V2 = 612 mL
- T1 = 24 C + 273.15 = 297.15 K (convert from Celsius to Kelvin)
- T2 = 97 C + 273.15 = 370.15 K
- P2 = 526 mm Hg

We want to find P1, the original pressure.
Plugging in the values, we get:
(P1 × 436 mL) ÷ (297.15 K) = (526 mm Hg × 612 mL) ÷ (370.15 K)

Solving for P1, we get:
P1 = (526 mm Hg × 612 mL × 297.15 K) ÷ (436 mL × 370.15 K) = 266.8 mm Hg

Therefore, the original pressure was 266.8 mm Hg.

For more question on pressure

https://brainly.com/question/24719118

#SPJ11

The main difference between practical work inside and outside a laboratory is the environment and tools used for experimentation.

Inside a laboratory, experiments are conducted in a controlled environment with specialized equipment and instruments designed to facilitate experimentation, record data, and ensure safety.

On the other hand, outside the laboratory, experiments are often conducted in a less controlled environment, which can make it more challenging to control variables and obtain accurate results.

Also, experiments outside the laboratory often require different tools and techniques to account for environmental factors such as weather conditions. However, outside the laboratory, there is often more opportunity for real-world applications of experimental findings.

More on practical laboratory works can be found here: https://brainly.com/question/27748008

#SPJ1