1. The mass of the water sample is approximately 8.77 grams.
2. Approximately 11,322 Joules of heat are required to warm a 135g cup of water from 15°C to 35°C.
We're given the values:
Q = -870 J (lost heat, so negative value)
ΔT = -24.8°C (temperature dropped)
c = 4.18 J/(g°C) (specific heat capacity of water)
Rearrange the formula to solve for mass:
m = Q / (cΔT)
Plug in the values:
m = -870 / (4.18 × -24.8)
m ≈ 8.77 g
The mass of the water sample is 8.77 grams.
We're given the values:
m = 135 g
ΔT = 35°C - 15°C = 20°C
c = 4.18 J/(g°C) (specific heat capacity of water)
Now, use the formula Q = mcΔT to find the heat required:
Q = 135 × 4.18 × 20
Q ≈ 11322 J
Approximately 11,322 Joules of heat are required to warm a 135g cup of water from 15°C to 35°C.
To know more about specific heat capacity click on below link:
https://brainly.com/question/29766819#
#SPJ11
You want to link a suspect to a crime scene. You have a DNA sample that you’ve taken from the crime scene, but the suspect is nowhere to be found so you can’t get his DNA to compare it to. However, the suspect’s family has agreed to give you samples of their DNA. Which family member would be the best option to help you see if the crime scene sample can be linked to the suspect?
The suspect’s cousin
The suspect’s grandfather
The suspect’s stepmother
The suspect’s twin brother
The best option to help you see if the crime scene sample can be linked to the suspect would be the suspect's twin brother. The correct answer choice is "The suspect’s twin brother"
This is because twins, specifically identical twins, share almost 100% of their DNA. Comparing the DNA sample from the crime scene to the twin brother's DNA would provide the most accurate and reliable indication of whether the suspect is linked to the crime scene or not.
Other family members, such as the cousin, grandfather, and stepmother, would share a lesser degree of genetic similarity with the suspect, making it less conclusive for establishing a link.
Therefore, "The suspect’s twin brother" is the correct answer choice.
For more such questions on crime scene, click on:
https://brainly.com/question/29025973
#SPJ11
How much heat is released when a 27. 7 g sample of ethylene glycol (C = 2. 42 J/gºC) at 42. 76°C is cooled to
32. 5°C
When a 27. 7 g sample of ethylene glycol (C = 2. 42 J/gºC) at 42. 76°C is cooled to 32. 5°C the amount of heat released is 685.87 joule.
To calculate the heat released when a 27.7 g sample of ethylene glycol is cooled from 42.76°C to 32.5°C, you can use the formula:
q = mcΔT
where q represents the heat released, m is the mass (27.7 g), c is the specific heat capacity (2.42 J/gºC), and ΔT is the change in temperature (42.76°C - 32.5°C).
ΔT = 42.76°C - 32.5°C = 10.26°C
Now plug in the values into the formula:
q = (27.7 g) × (2.42 J/gºC) × (10.26°C) = 685.87 J
So, 685.87 Joules of heat are released when the 27.7 g sample of ethylene glycol is cooled from 42.76°C to 32.5°C.
Know more about Specific heat capacity here:
https://brainly.com/question/29766819
#SPJ11
If 9.82 g of pb(no3)4 are dissolved to make a 3.5 m solution, what is the volume (in ml.) of that solution?
The volume of the 3.5 m solution containing 9.82 g of Pb(NO3)4 is about 4.103 mL.
To calculate the volume of the solution, we need to use the formula for molality:
Molality (m) = moles of solute / kg of solvent
First, we need to find the moles of Pb(NO3)4 in 9.82 g. The molar mass of Pb(NO3)4 is approximately 683.56 g/mol.
Moles of Pb(NO3)4 = 9.82 g / 683.56 g/mol ≈ 0.01436 mol
Now, we can use the given molality (3.5 m) to find the mass of the solvent:
0.01436 mol = 3.5 m * kg of solvent
kg of solvent = 0.01436 mol / 3.5 m ≈ 0.004103 kg
Since the solvent is water, we can assume that 1 kg of water is equal to 1 L. Therefore, the volume of the solution is:
0.004103 kg * 1000 mL/kg ≈ 4.103 mL
So, the volume of the 3.5 m solution containing 9.82 g of Pb(NO3)4 is approximately 4.103 mL.
To learn more about solvent, refer below:
https://brainly.com/question/30885015
#SPJ11
Identify each substance based on its description. jake collected samples of two substances while he was out walking. after taking the samples home, he ran tests and found that one substance is slippery and conducts electricity in water. these properties made jake conclude that the substance is probably . the other substance continuously made bubbles of hydrogen gas when jake dropped magnesium into an aqueous solution of the substance. jake concluded that the second substance is probably .
The first substance that Jake collected is likely a base. The slippery feel is a common characteristic of bases, and the ability to conduct electricity in water indicates the presence of ions (typically hydroxide ions, OH-) which are formed when the base dissolves in water.
The second substance that Jake collected is likely an acid. The formation of hydrogen gas when magnesium is added to an acid is a common characteristic of acids. The reaction can be written as:
Mg + 2HCl → MgCl2 + H2
where HCl represents hydrochloric acid. The production of hydrogen gas indicates the presence of H+ ions, which are characteristic of acids.
To know more about substance refer here
https://brainly.com/question/13320535#
#SPJ11
Pressure: 101. 3 kPa → 1. 92 atm
Volume: ? L→ 8. 0 L
Assume constant temperature and number of moles.
The initial volume is 15.36 L when the pressure changes from 101.3 kPₐ to 1.92 atm, and the final volume is 8.0 L, assuming constant temperature and number of moles.
To find the initial volume in liters when the pressure changes from 101.3 kPₐ to 1.92 atm, and the final volume is 8.0 L. We will assume constant temperature and number of moles.
Step 1: Convert the initial pressure to atm.
1 atm = 101.325 kPₐ, so:
(101.3 kPₐ) × (1 atm / 101.325 kPₐ) = 1.000 atm (approximately)
Step 2: Apply Boyle's Law, which states that P₁×V₁ = P₂×V₂ when temperature and moles are constant.
P₁ = 1.000 atm
P₂ = 1.92 atm
V₂ = 8.0 L
Step 3: Solve for the initial volume, V₁.
1.000 atm × V₁ = 1.92 atm × 8.0 L
V₁ = (1.92 atm * 8.0 L) / 1.000 atm
V₁ = 15.36 L
The initial volume is 15.36 L when the pressure changes from 101.3kPₐ to 1.92 atm, and the final volume is 8.0 L, assuming constant temperature and number of moles.
To know more about Boyle's Law :
https://brainly.com/question/1437490
#SPJ11
A gas occupying 3. 05 liters at STP is warmed to 85. 0°C. It
now occupies 9. 85 liters. What is the pressure of the gas?
The pressure of the gas can be calculated using the combined gas law equation. The pressure of the gas at STP is 1 atm. Therefore, the pressure of the gas at 85.0°C is 0.289 atm.
Given that a gas occupies 3.05 L at STP, we can assume that the gas is at a pressure of 1 atm and a temperature of 273 K. We can use the ideal gas law to find the number of moles of gas in the container at STP:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
Rearranging the equation to solve for n, we get:
n = PV/RT
Substituting in the values for P, V, R, and T, we get:
n = (1 atm)(3.05 L)/(0.0821 L·atm/mol·K)(273 K)
n = 0.125 mol
Now, we know that the volume of the gas has increased to 9.85 L and the temperature has increased to 85°C. We need to find the new pressure of the gas.
First, we need to convert the temperature to Kelvin:
85°C + 273 = 358 K
Next, we can use the combined gas law to find the new pressure of the gas:
P1V1/T1 = P2V2/T2
Substituting in the values we know:
(1 atm)(3.05 L)/(273 K) = P2(9.85 L)/(358 K)
Solving for P2, we get:
P2 = (1 atm)(3.05 L)/(273 K)(9.85 L/358 K)
P2 = 0.289 atm
Therefore, the pressure of the gas at the new volume and temperature is 0.289 atm.
To know more about the combined gas law refer here :
https://brainly.com/question/30458409#
#SPJ11
if 5.0 ml of 0.10 m naoh is added to 25.0 ml of 0.10 m hcl, what will be the ph of the resulting solution? round your answer to two decimal places.
The pH of the resulting solution is 1.08 (rounded to two decimal places).
First, we need to calculate the amount of acid and base present:
moles of HCl = (0.10 mol/L) * (0.025 L) = 0.0025 mol \\moles of NaOH = (0.10 mol/L) * (0.005 L) = 0.0005 mol
Since HCl and NaOH react in a 1:1 ratio, all of the NaOH will be used up in the reaction and 0.0005 moles of HCl will be left unreacted.
So, total volume of the solution will be [tex]25.0 ml + 5.0 ml = 30.0 ml = 0.03 L[/tex]
The concentration of unreacted HCl will be:
C(HCl) = (0.0025 mol) / (0.03 L) = 0.0833 M
Now we can calculate the pH : pH = -log[H+]
[H+] = 0.0833 M \\pH = -log(0.0833) = 1.08
To know more about solution, here
brainly.com/question/30665317
#SPJ4
Answer:
pH = 1.18
Explanation:
First, calculate the moles of acid in the solution:
(0.0250 L )(0.10molL)=0.0025 mol acid
Next, calculate the moles of base:
(0.0050 L)(0.10molL)=0.00050 mol base
The strong acid and strong base will dissociate completely to generate the same number of moles of hydronium and hydroxide, respectively. The amount of acid exceeds the amount of base, so all the added hydroxide will neutralize an equivalent amount of hydronium. To find the remaining amount of hydronium, we subtract the moles of hydroxide added (equal to the moles of hydronium neutralized) from the moles of hydronium added:
0.0025 mol H3O+−0.00050 mol OH−=0.0020 mol H3O+
To find the concentration of hydronium, we must divide this number of moles by the total volume of solution, being sure to add the volumes of acid and base added together:
0.0020 mol H3O+0.0300 L≈0.06667 M H3O+
Finally, take the negative logarithm of this amount to obtain the pH.
-log(0.06667)=1.18
Since the hydronium concentration is only precise to two significant figures, the logarithm should be rounded to two decimal places.
Coach pollard still thinks he is really fast and so he went out to sprint at the track meet. he ran at a velocity of 4 m/s. his mass is about 68 kg. about how much kinetic energy did coach pollard use before he inevitably hurt himself after the run? ke=1/2mv^2
Coach Pollard used about 544 J of kinetic energy during his sprint.
Kinetic energy is the energy possessed by a moving object due to its motion. In this case, Coach Pollard's kinetic energy is directly proportional to his mass and the square of his velocity. As he runs faster or has more mass, his kinetic energy will increase accordingly. This is important to consider in athletics and sports where energy and power are key factors in performance.
The kinetic energy of Coach Pollard can be calculated using the formula KE = 1/2mv², where m is the mass of Coach Pollard and v is his velocity. Substituting the given values, we get KE = 1/2 × 68 kg × (4 m/s)² = 1/2 × 68 kg × 16 m²/s² = 544 J. As a result, Coach Pollard used approximately 544 J of kinetic energy throughout his sprint.
To know more about the Kinetic energy, here
https://brainly.com/question/20411782
#SPJ4
A gas occupies 900 mL at a temperature of 27. 0°C. What is the
Temperature of the gas if the volume of the container increases to 1074
mL?
The temperature of the gas when the volume of the container increases to 1074 mL is 358.15 K or 85.0°C
The behavior of gases is affected by several factors including temperature, pressure, and volume. One important principle that applies to gases is that they tend to occupy the entire volume of their container. Therefore, if the volume of the container increases, the gas will occupy more space.
In this particular scenario, the gas initially occupies 900 mL at a temperature of 27.0°C. When the volume of the container increases to 1074 mL, we need to determine the corresponding temperature of the gas. To do this, we can use the formula:
(V1/T1) = (V2/T2)
Where V1 and T1 represent the initial volume and temperature of the gas, respectively, and V2 and T2 represent the final volume and temperature of the gas, respectively.
Substituting the given values into the formula, we get:
(900/300.15) = (1074/T2)
Simplifying the equation, we can cross-multiply and solve for T2:
900T2 = 1074 x 300.15
T2 = 1074 x 300.15 / 900
T2 = 358.15 K
Therefore, the temperature of the gas when the volume of the container increases to 1074 mL is 358.15 K or 85.0°C (rounded to one decimal place).
To know more about temperature, visit:
https://brainly.com/question/11464844#
#SPJ11
A 2.5l sample of gas is at stp. when the temperature is raised to 373 and the pressure remains constant what will the new volume of the gas be?
To solve this problem, we can use the combined gas law formula, which relates the initial and final states of a gas:
V1/T1 = V2/T2
Where:
V1 = initial volume = 2.5 L
T1 = initial temperature = 273 K (since STP is 0°C, which is 273 K)
V2 = final volume (what we need to find)
T2 = final temperature = 373 K
Rearrange the formula to find V2:
V2 = V1 * (T2 / T1)
Substitute the known values:
V2 = 2.5 L * (373 K / 273 K)
V2 ≈ 3.42 L
So, the new volume of the gas when the temperature is raised to 373 K and the pressure remains constant will be approximately 3.42 L.
For more questions on: combined
https://brainly.com/question/25290815
#SPJ11
Part 1. A chemist reacted 15. 0 liters of gas with in the laboratory to form Cl 2 and Use the ideal gas law equation to determine the mass of NaCl that reacted with F2 at 280. K and F 2 +2NaCl Cl 2 +2NaF Part 2. Explain how you would determine the mass of sodium chloride that can react with the same volume of fluorine gas at STP
At 280 K and 1.50 atm, the mass of NaCl required to react with F₂ is 115.83 g; at STP, the mass of NaCl required to react with F₂ is 78.39 g.
Using the ideal gas equation, we will first determine the number of moles in F2:
Volume (V) = 15 L
Temperature (T) = 280 K
Pressure (P) = 1.5 atm
Gas constant (R) = 0.0821 atm.L/Kmol
Number of mole (n) =?
n = PV / RTn = (1.5 × 15) / (0.082 × 280)n = 0.98 moleF₂ + 2NaCl → Cl₂ + 2NaF
From the balanced equation above,
1 mole of F₂ reacted with 2 moles of NaCl.
0.98 mole of F₂ will react with = 0.98 × 2
= 1.96 moles of NaCl
Mole of NaCl = 1.96 moles
Molar mass of NaCl = 58.5 g/mol
Mass of NaCl =?
Mass = mole × molar massMass of NaCl = 1.98 × 58.5Mass of NaCl = 115.83 gB. How to determine mass of NaCl needed at STPAt standard temperature and pressure (STP),
22.4 L = 1 mole of F₂
15 L = 15 / 22.4
15 L = 0.67 mole of F₂
F₂ + 2NaCl → Cl₂ + 2NaF
From the balanced equation above,
1 mole of F₂ reacted with 2 moles of NaCl.
0.67 mole of F₂ will react with = 0.67 × 2 = 1.34 moles of NaCl
Mole of NaCl = 1.34 moles
Molar mass of NaCl = 58.5 g/mol
Mass of NaCl =?
Mass = mole × molar mass Mass of NaCl = 1.34 × 58.5 Mass of NaCl = 78.39 gLearn more about ideal gas law:
brainly.com/question/4147359
#SPJ4
Properties and Uses of Unsaturated Hydrocarbons
Project: Communicating Design Details
Active student guide
Answer:
Welcome to the project on communicating design details for the properties and uses of unsaturated hydrocarbons. This project aims to enhance your understanding of the characteristics and applications of unsaturated hydrocarbons.
Here are the steps to complete this project:
Step 1: Research
Research the different types of unsaturated hydrocarbons, including alkenes and alkynes. Find out their general properties, such as their reactivity, flammability, and solubility. Also, identify their uses in various industries, such as plastics, rubber, and fuel.
Step 2: Create a Design
Using your research findings, create a design to visually communicate the properties and uses of unsaturated hydrocarbons. You can use tools like Canva, PowerPoint, or other design software to create infographics, posters, or slideshows.
Step 3: Incorporate Key Information
Incorporate the key information you gathered in step 1 into your design. Make sure to include the following details:
Definitions of unsaturated hydrocarbons, alkenes, and alkynes
Properties of unsaturated hydrocarbons, including reactivity, flammability, and solubility
Applications of unsaturated hydrocarbons in various industries, such as plastics, rubber, and fuel
Examples of unsaturated hydrocarbons, such as ethene and propene for alkenes, and ethyne for alkynes
Step 4: Review and Refine
Review your design and refine it to make sure it effectively communicates the properties and uses of unsaturated hydrocarbons. Check for spelling and grammar errors, and ensure that the information is accurate and easy to understand.
Step 5: Present Your Design
Present your design to your class or teacher, and explain the properties and uses of unsaturated hydrocarbons. You can also invite feedback and questions to enhance your understanding of the topic.
In conclusion, the properties and uses of unsaturated hydrocarbons are essential for many industries. Through this project, you will gain a better understanding of unsaturated hydrocarbons and develop your communication skills to effectively present your findings. Good luck!
Explanation:
Answer:
Explanation:
The three types of unsaturated hydrocarbons is alkynes, alkenes, and aromatic hydrocarbons. Which is composed of alkynes? acetylene. brainlist
A 7. 15L balloon filled with gas is warmed from 256. 1K to 297. 1 K. What is the volume of the gas after it is heated?
When a 7.15L balloon filled with gas is warmed from 256.1K to 297.1K, the volume of the gas inside the balloon increases to 8.27L.
The volume of the gas in the balloon can be calculated using the Ideal Gas Law, which states that the product of pressure, volume, and temperature is proportional to the number of molecules in the gas.
This law is expressed mathematically as PV = nRT, where P is the pressure of the gas, V is its volume, n is the number of moles of gas, R is the universal gas constant, and T is the temperature in Kelvin.
In this case, the pressure and number of molecules of the gas remain constant, so we can simplify the Ideal Gas Law to V1/T1 = V2/T2, where V1 is the initial volume of the gas, T1 is the initial temperature, V2 is the final volume of the gas, and T2 is the final temperature. Solving for V2, we get V2 = (V1 x T2) / T1.
Substituting the given values, we get V2 = (7.15L x 297.1K) / 256.1K = 8.27L. Therefore, the volume of the gas in the balloon after it is heated to 297.1K is 8.27L.
In conclusion, when a 7.15L balloon filled with gas is warmed from 256.1K to 297.1K, the volume of the gas inside the balloon increases to 8.27L.
To know more about volume, visit:
https://brainly.com/question/1578538#
#SPJ11
Which property is size-independent?
conductivity
width
volume
mass
Conductivity is a measure of a material's ability to conduct electricity, which is determined by the flow of charged particles. The correct answer is Option: 1.
The ability to conduct electricity does not depend on the size or shape of the material, but rather on its chemical composition and the mobility of its charged particles. On the other hand, width (Option 2), volume (Option 3), and mass (Option 4) are all size-dependent properties. Width and volume are directly proportional to the size of an object, while mass is a measure of the amount of matter in an object, which is also size-dependent. Hence option 1 is correct.
To know more about Conductivity, here
brainly.com/question/21496559
#SPJ1
--The complete Question is, Which property is size-independent?
1. conductivity
2. width
3. volume
4. mass--
My teacher gave me this question for homework need help
A copper sulfate solution contained 0. 100 moles of copper sulfate dissolved in 0. 500 dm3 of water. Calculate the mass of copper sulfate in 30. 0 cm3 of this solution. Relative formula mass (Mr): CuSO4 = 159. 5
The mass of copper sulfate in 30.0 cm3 of this solution is 0.957 g.
The concentration of the copper sulfate solution is given by:
c = n ÷ V
c = 0.100 mol/0.500 dm³
c = 0.200 mol/dm³
To calculate the mass of copper sulfate in 30.0 cm³ of this solution, we first need to calculate the number of moles of copper sulfate in this volume:
n = c x V
n = 0.200 mol/dm³ x (30.0 cm³ ÷ 1000 cm³/dm³)
n = 0.006 mol
The mass of copper sulfate can be calculated using its molar mass:
m = n x Mr
m = 0.006 mol x 159.5 g/mol
m = 0.957 g
To learn more about copper follow the link:
brainly.com/question/22560035
#SPJ4
______ hydrocarbons are organic compounds that consist of hydrocarbons to which one or more functional groups have been substituted for one or more hydrogen atoms or carbon groups.
Substituted hydrocarbons are organic compounds that consist of hydrocarbons to which one or more functional groups have been substituted for one or more hydrogen atoms or carbon groups.
The functional group is a specific group of atoms that gives the molecule its characteristic properties and reactions.
Substitution is the process by which one or more hydrogen atoms or carbon groups are replaced by a functional group.
By substituting one or more hydrogen atoms or carbon groups in a hydrocarbon chain, we get a new molecule that has its own characteristic properties.
To know more about hydrocarbons visit:
https://brainly.com/question/30907363
#SPJ11
which of the following characteristics would be preferred for a better resonance structure? select the correct answer below: minimal formal charges maximized bond strength negative formal charges on the most electronegative atom all of the above
The characteristic that would be preferred for a better resonance structure is maximized bond strength. Option B is correct.
Maximizing bond strength is a crucial characteristic for a better resonance structure because it leads to a more stable structure. Resonance structures are a set of contributing structures that show the delocalization of electrons in a molecule. These structures should have similar energies and contribute equally to the actual structure of the molecule. The more stable a resonance structure, the greater its contribution to the actual structure.
Formal charges are important for resonance structures, but a minimal formal charge or negative formal charges on the most electronegative atom are not the only factors that contribute to a better resonance structure. In fact, some resonance structures may have formal charges that are not minimized or negative formal charges on less electronegative atoms.
Maximizing bond strength ensures that the structure is stable and contributes significantly to the actual structure of the molecule. Therefore, maximizing bond strength is the most important characteristic for a better resonance structure. Option B is correct.
To know more about the Resonance structure, here
https://brainly.com/question/29375608
#SPJ4
When 10 moles HCl reacts with Ca(OH) 2 how many moles of H_{2}*O are made?
The amount of Ca(OH)₂ produced = 5.2 g which is calculated in the below section.
NUMBER OF MOLES of HCl = Molarity of solution x Volume of Solution
# of moles of HCl = (0.40 mol/L ) x 350 mL
= (0.40 mol/L ) x 0.350 L
= 0.14 mol
The mass of HCl that makes 0.14 mol of HCl
Mass of HCl= # of moles x molar mass of HCl
Mass of HCl = 0.14 mol x 36.5 g/ mol
Mass of HCl = 5.11g
As per Stoichiometry , 1g of HCl reacts with 1.015 g of Ca (OH)₂
So, 5.11g of HCl can react with 5.11 x 1.015 g
= 5.1865 g or 5.2 g of Ca(OH)₂
To learn more about number of moles check the link below-
https://brainly.com/question/29367909
#SPJ4
Complete the balanced molecular chemical equation for the reaction below. If no reaction occurs, write NR after the reaction arrow. Be sure to include the proper phases for all species within the reaction.
H₂SO₄(aq) + CsOH(aq) →
Answer ASAP PLEase
The balanced molecular chemical equation for the reaction below is as follows;
H₂SO₄(aq) + 2CsOH(aq) → Cs₂SO₄(aq) + 2H₂O(l)
What is a molecular chemical equation?A chemical equation is a symbolic representation of a chemical reaction where reactants are represented on the left, and products on the right.
According to this question, a chemical equation occurs between sulfuric acid and caesium hydroxide to produce caesium sulphate and water.
The equation is said to be balanced when the number of atoms of each element on both sides of the equation are the same.
The balanced chemical equation of the reaction is as illustrated above.
Learn more about chemical equation at: https://brainly.com/question/28294176
#SPJ1
Certain amounts of the hypothetical substances A2 and B are mixed in a 3. 00 liter container at 300. K. When equilibrium is established for the reaction the following amounts are present: 0. 200 mol of A2, 0. 400 mol of B, 0. 200 mol of D, and 0. 100 mol of E. What is Kp, the equilibrium constant in terms of partial pressures, for this reaction
Without knowing the balanced chemical equation for the reaction involving A2, B, D, and E, it is not possible to determine the equilibrium constant Kp.
The equilibrium constant Kp is specific to a particular chemical reaction at a given temperature, and is determined by the stoichiometry of the reaction and the relative partial pressures of the reactants and products at equilibrium.
Therefore, to calculate Kp, we need to know the balanced chemical equation for the reaction involving A2, B, D, and E, as well as the partial pressures of the gases at equilibrium.
To know more about balanced refer here
https://brainly.com/question/27154367#
#SPJ11
How many degrees will the air temperature be different in 2050 from the air temperature in 2000? (Your answer should be a number or range of numbers. )
The air temperature difference in 2050 from 2000 could be 1.8 - 4.0 degrees Celsius.
What is temperatures?Temperatures refer to the degree of hotness or coldness of a substance or environment. Temperatures are usually measured with thermometers, which measure the thermal energy of a system. Temperatures can be measured in Fahrenheit, Celsius, or Kelvin. In general, temperatures tend to increase as the amount of thermal energy in a system increases.
It is impossible to accurately predict the exact air temperature difference in 2050 from 2000 without more information. However, it is estimated that the global average temperature could increase anywhere from 1.8 - 4.0 degrees Celsius by 2050, compared to pre-industrial levels. Therefore, a reasonable range of the air temperature difference in 2050 from 2000 could be 1.8 - 4.0 degrees Celsius.
To learn more about temperatures
https://brainly.com/question/29867784
#SPJ4
Predict which substances would have the highest volatility. explain why. ch3ch2oh c6h6 ch3och3h2opredict which substances would have the highest surface tension. explain why. h2och4ch3och3ch3oh
Predicting the substances with the highest volatility, the substances you've provided are ethanol (CH3CH2OH), benzene (C6H6), dimethyl ether (CH3OCH3), and water (H2O). Among these, dimethyl ether (CH3OCH3) has the highest volatility. This is because volatility is directly related to the strength of intermolecular forces.
Dimethyl ether has weak Van der Waals forces, making it easier for molecules to evaporate from the liquid phase to the gas phase. Ethanol and water both have hydrogen bonding, while benzene has stronger dispersion forces, resulting in lower volatility for these substances.
For the substances with the highest surface tension, the provided substances are water (H2O), methane (CH4), dimethyl ether (CH3OCH3), and methanol (CH3OH). Among these, water (H2O) has the highest surface tension. Surface tension arises from the imbalance of intermolecular forces near the surface of a liquid.
Water has strong hydrogen bonding, causing the molecules at the surface to be attracted to each other, creating a high surface tension. Methane has weak Van der Waals forces, while dimethyl ether and methanol have intermediate forces between hydrogen bonding and Van der Waals forces, resulting in lower surface tensions for these substances.
To know more about highest volatility refer here
brainly.com/question/30354221#
#SPJ11
The following reaction is done at stp:
n2 (g) + 3 h 2 (g) à 2 nh 3 (g)
if i.5 l of nitrogen gas are added to an excess of hydrogen gas, how many liters of nh3 gas will form?
At STP, 1.5 L of nitrogen gas will produce 3 L of NH₃ gas.
The balanced chemical equation for the reaction is N₂(g) + 3H₂(g) --> 2NH₃(g). According to the stoichiometry, 1 mole of nitrogen gas (N₂) reacts with 3 moles of hydrogen gas (H₂) to produce 2 moles of ammonia gas (NH₃). At STP, the volume of one mole of any gas is 22.4 L.
Step 1: Calculate the moles of N₂ in 1.5 L.
Moles of N₂ = (Volume of N₂ / 22.4 L/mol) = 1.5 L / 22.4 L/mol = 0.067 moles.
Step 2: Use the stoichiometry to find the moles of NH₃ formed.
Moles of NH₃ = 2 * Moles of N₂ = 2 * 0.067 moles = 0.134 moles.
Step 3: Calculate the volume of NH₃ formed at STP.
Volume of NH₃ = (Moles of NH₃ * 22.4 L/mol) = 0.134 moles * 22.4 L/mol = 3 L.
To know more about balanced chemical equation click on below link:
https://brainly.com/question/28294176#
#SPJ11
Name the following compounds:
a. C2H4 or H2C=CH2
b. CsH6 or CH3CH=CH2
C. C4H8 or H2C=CHCH2CH3
d. CaHs or CH3CH2=CH2CH3
e. CsH1o or CHaCH2CH2CH=CH2
What is the empirical formula for a compound that is 94. 1% oxygen and 5. 90 % hydrogen?
The empirical formula for this compound is H1O1.
To find the empirical formula of a compound with 94.1% oxygen and 5.9% hydrogen, we first assume a 100g sample. This gives us 94.1g of oxygen and 5.9g of hydrogen. Next, we'll convert these values to moles:
Oxygen: 94.1g / 16g/mol (molar mass of O) ≈ 5.88 moles
Hydrogen: 5.9g / 1g/mol (molar mass of H) ≈ 5.9 moles
Now, we'll find the mole ratio by dividing both values by the smallest number of moles:
Oxygen: 5.88 / 5.88 ≈ 1
Hydrogen: 5.9 / 5.88 ≈ 1
The empirical formula for this compound is H1O1, which can be simplified to H2O (water).
To learn more about hydrogen, refer below:
https://brainly.com/question/28937951
#SPJ11
What type of acid-base reactions are solely defined by how protons are given up or are taken?
what is a hydroxide ion?
what two products do all acid-base neutralization reactions produce
calculate the ph of a 0.25m solution of h3o+
calculate the ph of a 6.3x10-8m solution of h3o+
look at your answer for 4 and 5 which one is a base?
look at 4 and 5 which one is a strong acid
Type of Acid-Base Reactions: Acid-Base Neutralization Reactions. A hydroxide ion (OH-) is an anion with a single hydrogen atom and two oxygen atoms.
What is hydrogen ?Hydrogen is the lightest of all elements, and is a colorless, odorless, tasteless, non-metallic gas. It is the most abundant element in the universe, making up around 75% of all matter. Hydrogen has three isotopes: protium (the most common), deuterium, and tritium. Hydrogen is found on Earth in compounds of other elements, such as water (H2O), and in hydrocarbons, such as natural gas (CH4). It is a key component of many fuels and can be used to generate electricity through fuel cells.
All acid-base neutralization reactions produce a salt and water. The salt will depend on the acid and base used in the reaction.The pH of a 0.25M solution of H3O+ is 0.The pH of a 6.3x10-8M solution of H3O+ is 7.21.The pH of 0.25M solution of H3O+ (0) is a base, while the pH of 6.3x10-8M solution of H3O+ (7.21) is neutral.The pH of 0.25M solution of H3O+ (0) is a strong acid, while the pH of 6.3x10-8M solution of H3O+ (7.21) is a weak acid.
To learn more about hydrogen
https://brainly.com/question/24433860
#SPJ4
The hypothetical elements shown here (figures a—d) do not include hydrogen or helium. Which element would you expect to bond covalently with an oxygen atom to form a two-atom molecule?
There are so many elements that can be able to bond with oxygen in a covalent manner as shown below.
What elements bond covalently to oxygen?Elements that can bond covalently with oxygen to form two-atom molecules include carbon (C), nitrogen (N), fluorine (F), chlorine (Cl), and many others.
The specific element that would form a covalent bond with oxygen depends on a variety of factors, including the electronegativity and valence electron configuration of the elements involved as shown.
Learn more about bonds:https://brainly.com/question/30480258
#SPJ1
What mass of LiOH would need to be dissolved in water to make 300. 0 mL of a solution with a pH of 11. 25
We need to dissolve 0.0405 mg mass of LiOH in 300.0 mL of water to get a solution with a pH of 11.25.
To find the mass of LiOH needed to make the solution, we need to first calculate the concentration of hydroxide ions in the solution using the pH value. Since pH = 11.25, the [OH⁻] concentration can be found by taking the negative logarithm of 11.25 and converting it to the concentration scale.
[tex][OH^-] = 10^{-11.25} = 5.62 \times 10^{-12} \, \text{M}[/tex]
Since LiOH is a strong base, it will dissociate completely in water, so the amount of LiOH needed can be calculated using the stoichiometry of the balanced equation:
LiOH + H₂O → Li⁺ + OH⁻ + H₂O
Thus, 1 mole of LiOH produces 1 mole of OH⁻. To achieve a concentration of 5.62 x 10⁻¹²M, we need 5.62 x 10⁻¹² moles of LiOH per mL of solution. Therefore, for 300.0 mL of solution, the number of moles of LiOH needed is:
[tex]\[5.62 \times 10^{-12} \, \text{mol/mL} \times 300.0 \, \text{mL} = 1.69 \times 10^{-9} \, \text{mol}\][/tex]
The molar mass of LiOH is 23.95 g/mol, so the mass of LiOH needed is:
1.69 x 10⁻⁹ mol x 23.95 g/mol = 4.05 x 10⁻⁸ g or 0.0405 mg (to 4 significant figures).
To know more about the LiOH refer here :
https://brainly.com/question/1686138#
#SPJ11
Refute Dalton‟s Theory of “indivisible” atom using J.J. Thompson‟s and Rutherford Model of the atom.
Differentiate between the following.
The spectra line of white light and the spectral lines of elements. Ground state of an electron and the excited state
Calculate the wavelength the frequency and energy of the lines in the Balmer series when n2 = 3 and 5
The wave number of a line in the Lyman series is 10282383.75m-1
i. Calculate the frequency and energy of the series ii. Which line in the series is it?
Give reasons for the following: (i) The nucleus accounts for the mass of an atom. (ii) The number of protons tells us the name of the element. (iii) Atomic masses unlike the atomic numbers are not whole numbers.
6. Verify that the atomic mass of magnesium is 24.31, given the following: 24Mg= 23.985042amu, (78.99%) ; 25Mg= 24.985837 amu, (10.00% ); 26Mg= 25.982593, (11.01%)
Dalton's theory of the "indivisible" atom was refuted by the discovery of subatomic particles by J.J. Thompson and the Rutherford model.
Spectral lines of elements are discrete wavelengths of light, unlike the continuous spectrum of white light. Electrons in the ground state have the lowest energy, while those in the excited state have higher energy. The Balmer series produces specific wavelengths, frequencies, and energies when n2=3 and n1=2.
The wave number of a line in the Lyman series is 10282383.75 m^-1, with a frequency of 2.92 x 10^14 Hz and an energy of 1.94 x 10^-19 J. The nucleus accounts for an atom's mass, and the number of protons determines the element's identity.
Atomic masses are not whole numbers because they reflect the abundance of different isotopes. The atomic mass of magnesium is 24.31, calculated using the percent abundance and mass of each isotope.
Learn more about atomic masses, here:
https://brainly.com/question/17067547
#SPJ1
Is the solvation of borax in water an exothermic or endothermic process?.
The solvation of borax in water is an exothermic process. This means that energy is released when borax dissolves in water.
This can be seen in the fact that the temperature of the solution increases as borax dissolves in water, indicating that energy is being released into the surroundings.
The reason for this exothermic behavior is that the solvation process involves the breaking of the ionic bonds between borax molecules and the formation of new bonds between the borax ions and water molecules.
The energy released in the formation of these new bonds is greater than the energy required to break the existing bonds, resulting in a net release of energy.
To know more about borax refer to-
https://brainly.com/question/14724418
#SPJ11
