Answer:
when lit, the atoms of different chemical compounds inside the firework absorb energy, when the electrons fall back to lower energy levels, they give off colored light. Depending upon the chemical used, different colors are produced. neon lights or signs are glass tubes filled with neon gas. When the light is plugged in, the electrical energy causes the electrons of neon to jump to higher energy levels, when they go to lower levels, colored light is given off. The neat thing is that the neon never gets used up. The only thing that gets used up is the electricity. The electrons don't get destroyed and can be used over and over again jumping levels. Neon glows with an orange light, but you know that neon signs can be lots of different colors. The variations come when different gases other than neon are used such as argon, or krypton or when the tube is painted so that with the light produced it produces a certain color.
Explanation:
After being excited by high levels of electrical energy (as in neon signs) or heat energy, various elements and molecules will emit their own specific colors of light.
What are basis behind fireworks?Metals burn in a variety of colors. When a copper compound is lit, for example, the flame is blue-green.
Calcium burns red, while potassium burns purple. Metals are combined to produce various colors in fireworks.
The appearance of each firework is determined by the type of stars it contains, as well as the size and quantity of these pellets.
Some stars contain metal salts, which produce brilliant colors, while others contain a variety of chemical compounds that produce dazzling light effects such as strobing, sparkling, and others.
Various elements and molecules will emit their own specific colors of light after being excited by high levels of electrical energy (as in neon signs) or heat energy (as in the fireworks).
Thus, the neon signs or fireworks provide different colors.
For more details regarding fireworks, visit:
https://brainly.com/question/16737516
#SPJ2
MAJOR AMOUNT OF POINTS
What is the chemical formula of wood?
Answer:
C₆H₁₀O₅
Explanation:
In chemistry, we denote any molecule with carbons, hydrogens, and other elements combined together as organic compounds. This is where get get "Organic Chemistry" from.
Wood is going to be an organic compound.
Answer:
C₆H₁₀O₅
Explanation:
PLZ HELP ME!!!!!!!!!!!!!!!
Answer:Graduated Cylinder
Explanation:
You use the water displacement test to find the volume of irregular shaped objects.
Answer:
Graduated Cylinder
8Li
8 Be
0e
What type of radioactive decay is this?
Answer:
emitted i think
Explanation:
To determine the type of radiation (alpha, beta or gamma), first determine the background count rate, then the source count rate with no absorber. Next, place a sheet of paper between the source and the monitor. If the counts are significantly reduced, the source emits alpha particles.
Answer:
Plasma Levels of IL-8 and TGF-β1 Predict Radiation-Induced Lung Toxicity in Non-Small Cell Lung Cancer: A Validation Study
Explanation: got it from sources
A 40 g sample of sucrose contains 16.8 g of carbon. what is the mass
percentage of carbon in sucrose?
Answer:
Thus 100.00 g of sucrose contains 42.11 g of carbon, 6.48 g of hydrogen, and 51.41 g of oxygen; to two decimal places, the percent composition of sucrose is indeed 42.11% carbon, 6.48% hydrogen, and 51.41% oxygen.
Explanation:
Hope this helps, leave a heart ❤️
Mangrove trees are affected by several factors. Which is an abiotic factor contributing to the energy cycle of a mangrove ecosystem?
Answer:
Just think of whats in a forest ecosystem
for example
Water
sunlight
tempreture
The abiotic factor that has been capable of contributing to the energy cycle of the mangroves has been climate.
Mangrove trees are the shrubs that have been found in the coastal regions. The trees have been capable of tolerating the harsh climatic conditions such as salty water, the flow of tides, etc.
The abiotic are the nonliving factors that has been capable of changing get resulting in the formulation of the ecosystem.
The mangroves have been capable to thrive in hard conditions. The abiotic factor that has been capable to affect the growth of the mangroves has been climate.
For more information about Mangrove trees, refer to the link:
https://brainly.com/question/7780978
Is combining water and powdered drink mix a chemical reaction? Construct an argument to support your claim.
Answer:No
Explanation:
It doesn't make a chemical reaction if u do that. Hope that helps!❤
According to the kinetic-molecular theory, what happens to a liquid when it is transferred from one container to another? The volume and the shape stay the same. The volume increases to fill the new container, but the shape stays the same. The volume stays the same, but the shape changes to fit the new container. The volume and the shape change to fill the new container.
Answer:
C, "The volume stays the same, but the shape changes to fit the new container."
Explanation:
i took the test & got this question correct.
Answer:
It's C
Explanation:
For Edge:)
Which statement best defines potential enregy?
A. Potential energy is stored energy.
B. Potential energy is energy that can change over time.
C.Potential energy is the energy of motion.
D. Potential energy is the type of energy a roller coaster uses.
Answer:
A. Potential energy is stored energy
Explanation:
Answer:
A
Explanation:
i have the same question
if elements were combined by shaking would they have new properties
Answer: Yes because that's when they form a compound
Jamal is 8 miles away from his house. He rides his bike home toward home at a speed of 12 mph..
How far away from home is he after a half hour?
Answer: 2miles
Explanation:if he’s going 12 miles in one hour, in half an hour he would’ve made it 6 miles. 8-6=2
Answer: b. 2 miles
Explanation:
Plz help! I’m on a timer!
Answer: c. ceabd
Explanation: Substances that are more dense move to the bottom of the beaker. Substances that are less dense float to the top.
The overall reaction in a commercial heat pack can be represented as How much heat is released when 4.40 moles of iron are reacted with excess ? Heat = kJ How much heat is released when 1.00 mole of is produced? Heat = kJ How much heat is released when 1.60 g iron is reacted with excess ? Heat = kJ How much heat is released when 11.8 g and 1.20 g are reacted? Heat = kJ
Answer:
Explanation:
The overall equation for this reaction can be represented as:[tex]4 Fe(s) + 3 O_{2(g) } \to 2Fe_2O_{3(s)} \ \ \ \ \Delta H = -1652 \ kJ[/tex]
The first question says:
How much heat is released when 4.40 moles of iron is reacted with excess O₂?
Suppose 1652 kJ of heat is being emitted into the surroundings when four(4) moles of Fe reacted with O₂, therefore;
4.40 moles of Fe reacts with:
[tex]=\dfrac{4.40 \ moles \times 1652 \ kJ}{4 \ moles}[/tex]
= 1817.2 kJ of heat will be produced.
The second question says:
How much heat is released when 1.00 mole of [tex]Fe_2O_3[/tex] is produced?
Given that 1652 kJ of heat is being emitted into the surroundings when two(2) moles of [tex]Fe_2O_3[/tex] is produced, therefore;
1.00 moles of [tex]Fe_2O_3[/tex] reacts with:
[tex]=\dfrac{1.00 \ moles \times 1652 \ kJ}{2 \ moles}[/tex]
= 826 kJ of heat will be produced.
To the third question; we have:
How much heat is released when 1.60 g iron is reacted with excess O₂?
We need to find the number of moles of iron first.
We know that number of moles = mass/molar mass
Thus, the molar mass of iron = 55.8 g/mol
number of moles of iron = (1.60g) / (55.8 g/mol)
number of moles of iron = 0.02867 mol
Thus; [tex]\dfrac{0.02867\ mol \times 1652 \ kJ }{4 \ mol}[/tex]
= 11.84 kJ of heat is released.
The last question says:
How much heat is released when 11.8 g Fe and 1.20 g O₂ are reacted?
Again;
the number of moles of Fe = (11.8g) / (55.8 g/mol) = 0.2114 mole of Fe
Thus; [tex]\dfrac{0.2114\ mol \times 1652 \ kJ }{4 \ mol}[/tex]
= 87.31 kJ of heat is released.
On the other hand,
the number of moles of O₂ = (1.20g) / (32 g/mol) = 0.0375 mol of O₂
Thus; [tex]\dfrac{0.0375\ mol \times 1652 \ kJ }{3 \ mol}[/tex]
= 20.65 kJ of heat is released
Therefore, when these two(2) reactants reacted with each other, it is just the smaller amount of heat that would be released because oxygen tends to be the limiting reactant.
box a and box b have the same density. box a had more volume. which box has more mass?
Answer:
Box A.
Explanation:
Density can be defined as mass all over the volume of an object.
Simply stated, density is mass per unit volume of an object.
Mathematically, density is given by the equation;
[tex]Density = \frac{mass}{volume}[/tex]
In this scenario, Box A and Box B have the same density. However, Box A had more volume. Therefore, the box that would have more mass would be Box A because it has more capacity or volume to hold more matter.
This ultimately implies that, the volume of a box is directly proportional to its mass (amount of matter it can hold); the higher the volume of the box, the higher its mass (more mass).
Let's assume Box A has a volume of 25cm³ and a mass of 50kg.It's density would be;
[tex]Density = \frac{50}{25}[/tex]
Density = 2kg/cm³
Assuming Box B has a volume of 10cm³ and a mass of 20kg.It's density would be;
[tex]Density = \frac{20}{10}[/tex]
Density = 2kg/cm³
Therefore, it can be deduced that even though Box A and Box B have the same density; Box A had more volume and consequently, more mass.
How do geologists know that there once was a vast sea where the Grand Canyon is today?
The geologists know the presence of the vast sea at Grand Canyon by the erosion and indentations.
Grand Canyon in Arizona has been the rock sediment. It has been determined to be the vast sea due to the presence of oceanic floors. The erosion of the rocks results in the formation of the land over a vast period of time.
The rock indentation results in the formation of the mountains. The rock has been indented with the force thus, there has been the oceanic force that results in the indentations.
Thus, the erosion and indentations have resulted in the formation of the Grand Canyon by a vast sea.
For more information about the geological study, refer to the link:
https://brainly.com/question/13394878
all living things need energy to survive The most common source of energy is organisms is glucose molecules which are used as food a plant food is no exception where do plants get the carbon needed to make glucose molecules during the process of photosynthesis.
A. From the ground
B. From the air
C. From the water
D. From the sun
Answer:
the answer is air
Explanation:
Answer:
B. From the air
Explanation:
How many total atoms of element X are represented below?
name one state of matter
Answer:
solid
Explanation:
Answer:
Gas
Explanation:
What does the statement there is only about 13.7 billion ⭐️ in space
Calculate the density of an object with mass = 30.50 g and a volume = 2.20 cm^3
Answer:
The answer is 13.86 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question
mass = 30.5 g
volume = 2.2 cm³
We have
[tex]density = \frac{30.5}{2.2} \\ = 13.863...[/tex]
We have the final answer as
13.86 g/cm³Hope this helps you
Why was periodic table developed
Answer:
The periodic table was created to organize the elements and provide physical and chemical properties, also to group with elements like it.
Hope this helps
A skittish squirrel is climbing vertically on a tree. Its
motion is shown on the following graph of vertical
position y vs. time t.
6
5+
3
2+
1
→t(s)
2
3
4
5
6
7
8
9
What is the instantaneous speed of the squirrel at time
t=2 s?
Answer: 1
Explanation:
Answer:
-0.1
Explanation:
zinc metal reacts with hydrochloric acid to produce hydrogen gas.
what best describes this reaction?
a. A single replacement reaction takes place because zinc is more reactive and hydrogen
b. A single replacement reaction takes place because zinc is more reactive than chlorine
c. A double replacement reaction takes place because zinc is less reactive than hydrogen
d. A double replacement reaction takes place because zinc is less reactive than chlorine
a. A single replacement reaction takes place because zinc is more reactive and hydrogen
Further explanationIn voltaic series
Li-K-Ba-Ca-Na-Mg-Al-Mn- (H2O) -Zn-Cr-Fe-Cd-Co-Ni-Sn-Pb- (H) -Cu-Hg-Ag-Pt-Au
The more to the left, the metal is more reactive (easily release electrons) and the stronger reducing agent
The more to the right, the metal is less reactive (harder to release electrons) and the stronger oxidizing agent
So that the element located on the left can push the element on the right in the redox reaction
Reaction
Zn+2HCl ⇒ ZnCl₂ + H₂
If we look at this reaction, the elements that play a role are those that undergo a redox reaction
Oxidation : Zn⇒Zn²⁺ + 2e
Reduction : 2H⁺ + 2e ⇒H₂
So Zn (located on the left) can push H (the element on the right) in the redox reaction ⇒ Zn more reactive
A single replacement reaction is a chemical reaction in which one element replaces the other elements of a compound to produce new elements and compounds
A+BC⇒AC+B
So the above reaction involves the elements Zn and H which undergo a redox reaction and are included in a single replacement
Answer:
A
Explanation:
Elements in columns with the same number of valence electrons are in the same___
Answer:
group
Explanation:
The periodic table also has a special name for its vertical columns. Each column is called a group. The elements in each group have the same number of electrons in the outer orbital.
what can you infer about an ion that has a negative charge?
I NEED HELP FAST FOR MY TEST!!!
Answer:
It has more electrons than protons. It is an anion.
If a substance has a density GREATER
than the liquid it's in, then it will
Answer:
sink
Explanation:
a substance with a higher density than others will sink and vice versa
Practice Problem #2 - Frank has an eraser with a mass of 10g and a volume
of 15cm? What is its density? Show your work:
Answer:
The answer is 0.67 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question
mass = 10 g
volume = 15 cm³
We have
[tex]density = \frac{10}{15} = \frac{2}{3} \\ = 0.66666666...[/tex]
We have the final answer as
0.67 g/cm³Hope this helps you
Each water molecule can form hydrogen bonds with up to _____ neighbors
Group of answer choices
6
8
2
4
Answer:
2
Explanation:
thats the answer.have good day
What components of an atom has no charge
Answer:
Neutrons
Explanation:
Protons have a positive (+) charge.
Electrons have a negative (-) charge.
Neutrons have a neutral (0) charge.
Answer: neutrons
The components of an atom that have no charge are neutrons. Neutrons have a neutral charge, which means it has no charge. It is not positive or negative. The answer is neutrons.
Imagine our class has discovered a new element and named it Berkmarium. Berkmarium is known to have 3 naturally occurring isotopes. In nature, 70% of the element is Berkmarium-95, 28% is Berkmarium-97, and 2% is Berkmarium-94. Which isotope will the average atomic mass of Berkmarum be closest to, and why? Support your answer with a calculation.
Answer:
Detail is given below.
Explanation:
Given data;
Abundance of Berkmarium-95 = 70%
Abundance of Berkmarium-97 = 28%
Abundance of Berkmarium-94 = 2%
Average atomic mass closer to which isotope = ?
Solution:
1st of all we will calculate the average atomic mass of Berkmarium.
Average atomic mass = (abundance of 1st isotope × its atomic mass) +(abundance of 2nd isotope × its atomic mass) + (abundance of 3rd isotope × its atomic mass) / 100
Average atomic mass = (70×95)+(28×97)+(2×94) /100
Average atomic mass = 6650 + 2716+ 188 / 100
Average atomic mass= 9554 / 100
Average atomic mass = 95.54 amu
The average atomic mass is closer to the isotope Berkmarium-95 because it is present in abundance as compared to the other two isotope. So this isotope constitute most of the part of Berkmarium.
Plz help! The best answer will be marked as brainliest!
Make a funny sentence for flammability and compounds for Magnesium
Here is an example for Mercury, it HAS to for Magnesium
“I love to travel but I do corrode aluminum so we won’t be flying off on adventures in airplanes planes anytime soon”
Answer:
This is hilarious, every time I ignite, they feed me water, little do they know this heat will defeat, and hydrogen only makes me stronger!
Explanation:
When Hg is burning, it uses the oxygen from H2O and turns it into hydrogen gas, and that contributes to the burning.
