Which statement is true about a polyatomic ion? it forms metallic bonds with other ions. It forms covalent bonds with other ions. It is made of atoms that are covalently bonded together. It has a charge that is distributed over only part of the ion.

Answers

Answer 1

A polyatomic ion is made of atoms that are covalently bonded together, which is true about polyatomic ions.

Covalent bonds form when electrons are shared between atoms. This contrasts with ionic bonds, where ions of opposite charges attract one another.

Polyatomic ions are covalently bonded molecules that contain an electrically charged atom or group of atoms. They can have either a positive or negative charge, and they are not usually found in their isolated form. Because they are charged, they have an impact on the chemistry of the surrounding substances.

An ion with more than one atom is called a polyatomic ion. There is one nitrogen atom and four hydrogen atoms in the ammonium ion. They all make up a single ion with the formula NH+4 and a charge of 1+. One carbon atom and three oxygen atoms make up the carbonate ion, which has a 2 overall charge.

Know more about polyatomic ion:

https://brainly.com/question/6689894

#SPJ11


Related Questions

26. Over time an open soft drink will lose carbonation (dissolved CO2


Which of these allows the CO2 to remain in solution the longest?


O Reduced air pressure


Exposure to direct sunlight


Increased air currents


O Cooler temperatures

Answers

Out of the options provided, cooler temperatures allow CO2 to remain in solution the longest.

When a soft drink is opened, CO2 molecules start to escape from the solution and accumulate in the headspace of the container. Higher temperatures increase the kinetic energy of the CO2 molecules, causing them to move faster and escape the solution more quickly. In contrast, cooler temperatures reduce the kinetic energy of the CO2 molecules, slowing down their movement and allowing them to remain in solution for a longer period of time.

Reduced air pressure, exposure to direct sunlight, and increased air currents can all further accelerate the loss of carbonation in an open soft drink. Reduced air pressure lowers the atmospheric pressure, which decreases the solubility of CO2 in the liquid. Exposure to direct sunlight increases the temperature of the drink and causes the CO2 molecules to escape more quickly. Increased air currents can also cause CO2 to escape more quickly by creating turbulence in the liquid.

Therefore, to keep a soft drink fizzy for longer, it is best to store it in a cool place and avoid exposing it to direct sunlight, reducing air pressure or increased air currents.

Know more about Kinetic Energy here:

https://brainly.com/question/26472013

#SPJ11

How many joules are required to raise the temperature of 100.0 grams of water from -269 degrees celsius to 1500 degrees celsius

Answers

About  739,982.4 Joules energy is required to raise the temperature of 100.0 grams of water from -269 degrees Celsius to 1500 degrees Celsius.

The formula for the change in heat is,

Q = mcΔT, the amount of energy required is Q, m is the mass of water, specific heat capacity of water is c, the change in temperature is ΔT,

ΔT = 1500°C - (-269°C)

ΔT = 1769°C

Next, we can look up the specific heat capacity of water, which is 4.184 J/g°C. Then, we can substitute the values into the formula,

Q = 100.0 g * 4.184 J/g°C * 1769°C

Q = 739,982.4 J

Therefore, it would require 739,982.4 Joules of energy to raise the temperature of 100.0 grams of water from -269 degrees Celsius to 1500 degrees Celsius.

To know more about change in heat, visit,

https://brainly.com/question/8828503

#SPJ4

It is the compound that acts to fulfill the function of the said product.

Answers

It is the compound that acts to fulfill the function of the said product.

the statement is true.

What is a compound?

A chemical compound is  described as a chemical substance composed of many identical molecules containing atoms from more than one chemical A

A product may be made up of one or more compounds that work together to fulfill any desired  function.

The key difference between  a chemical compound and solution is that a compound contains two or more elements that are chemically bound together whereas a solution has few substances that do not chemically bound together as compounds do.

Learn more about chemical compounds at :

https://brainly.com/question/26556885

#SPJ1

Blackworms were collected from an environment with an acidic pH, and the pulse rates were measured. Predict the outcome of the measurements. [2 pt] The pH of the nevironment would have no effect on pulse rate. The pulse rate would be increased to minimize the effects of acidosis. The pulse rate would be increased to minimize the effects of alkalosis. The pulse rate would be decreased to minimize the effects of acidosis

Answers

The pulse rate of blackworms collected from an environment with an acidic pH would be increased to minimize the effects of acidosis.

Acidosis occurs when there is an excess of acid in the body, which can lead to a decrease in blood pH. To compensate for this, the body increases pulse rate to improve blood circulation and oxygen delivery.

Blackworms are no exception to this mechanism and would experience an increase in pulse rate to counteract the acidic environment. It is important to note that the increase in pulse rate would not be enough to completely eliminate the effects of acidosis, but rather to minimize them.

To know more about pulse rate click on below link:

https://brainly.com/question/17744527#

#SPJ11

Draw the major organic product for each reaction. Assume a one to one ratio of starting material to reagent. H3Cl Cl --> AlCl3 ;

Answers

The major organic product for the reaction between hydrogen chloride (HCl) and aluminum chloride [tex](AlCl_3)[/tex] is aluminum chloride  [tex](AlCl_3)[/tex].

When hydrogen chloride (HCl) reacts with aluminum chloride [tex](AlCl_3)[/tex], the reaction is exothermic and produces aluminum chloride  [tex](AlCl_3)[/tex] as the major product. Hydrogen chloride (HCl) is a strong acid that dissociates fully in water, releasing chloride ions (Cl-). Aluminum chloride  [tex](AlCl_3)[/tex] is a strong base that reacts with hydrogen chloride (HCl) to form aluminum hydroxide [tex](AlCl_3)[/tex] and hydrochloric acid (HCl). The ratio of starting material to reagent is one to one.

The balanced equation for the reaction between hydrogen chloride (HCl) and aluminum chloride  [tex](AlCl_3)[/tex] is:

HCl +  [tex](AlCl_3)[/tex]  → [tex]Al(OH)_3[/tex] + HCl

Therefore, the major organic product for this reaction is aluminum hydroxide  [tex]Al(OH)_3[/tex], which is an inorganic compound.  

Learn more about major product Visit: brainly.com/question/29666831

#SPJ4

Classify each type bifunctional molecule as being a material used in the synthesis of polyesters, nylons, both, or neither. ​
dialcohol
diester
dinitro
diacid
diamine
diether

Answers

Dialcohol and diacid are bifunctional molecules that can be used in the synthesis of polyesters. In a polyester, the dialcohol and diacid react to form an ester bond, resulting in a long chain polymer.

Diesters can also be used in the synthesis of polyesters, as they can be hydrolyzed to form two carboxylic acid groups and two alcohol groups, which can then react to form an ester bond. Therefore, diesters are also a material used in the synthesis of polyesters.

Diamines and diacids can react to form nylon, so they are bifunctional molecules used in the synthesis of nylons. The reaction between a diamine and diacid forms an amide bond, which leads to a long-chain polymer.

Dinitro and diether are bifunctional molecules that are neither used in the synthesis of polyesters nor nylons. Dinitro compounds typically have nitro groups attached to each of the functional groups, making them more reactive and often used as explosives.

Diethers, on the other hand, can be used in organic synthesis as protecting groups for alcohols or carbonyl groups, but they do not have a direct role in the synthesis of polyesters or nylons.

To know more about Dialcohol refer to-

https://brainly.com/question/31540667

#SPJ11

which nutrients are most responsible for eutrophication?
a. carbon and oxygen
b. carbon and phosphorus
c. nitrogen and oxygen
d. nitrogen and phosphorus

Answers

Answer:

C. Nitrogen and Phosphorous.

Explanation:

the answer is nitrogen and oxygen

the process in which an atom or ion experiences a decrease in its oxidation state is _____________.

Answers

Answer:

Reduction

Explanation:

when an atom or ion decreases in oxidation state

The process in which an atom or ion experiences a decrease in its oxidation state is called reduction.

Reduction is the opposite of oxidation, which is the process in which an atom or ion experiences an increase in its oxidation state. In a redox (reduction-oxidation) reaction, one species undergoes reduction while the other undergoes oxidation.

In the process of reduction, the species gains electrons, resulting in a decrease in its oxidation state. The reducing agent is the species that donates electrons, while the oxidizing agent is the species that accepts electrons.

Reduction reactions are important in many chemical and biological processes, including metabolism, photosynthesis, and corrosion. The study of redox reactions is important in understanding the behavior of chemicals in natural and industrial processes.

To know more about oxidation state, refer here:

https://brainly.com/question/31688257#

#SPJ11

Naturally occurring potassium consists of potassium-39 and potassium-41. calculate the percentage of each isotope present if theaverage is 39.1.

Answers

When the average is 39.1, naturally occurring potassium consists of 50% potassium-39 and 50% potassium-41.

An isotope is a variant of an element that has the same number of protons but a different number of neutrons in its nucleus. Potassium has two naturally occurring isotopes: potassium-39 and potassium-41. To calculate the percentage of each isotope present when the average is 39.1, we can use the following formula:

% of potassium-39 = (39.1 - 41) / (39 - 41) x 100%
% of potassium-41 = 100% - % of potassium-39

Using this formula, we can first calculate the percentage of potassium-39:

% of potassium-39 = (39.1 - 41) / (39 - 41) x 100%
% of potassium-39 = -1 / (-2) x 100%
% of potassium-39 = 50%

This means that potassium-39 makes up 50% of the naturally occurring potassium. To calculate the percentage of potassium-41, we simply subtract the percentage of potassium-39 from 100%:

% of potassium-41 = 100% - 50%
% of potassium-41 = 50%

Therefore, potassium-41 also makes up 50% of the naturally occurring potassium. In summary, when the average is 39.1, naturally occurring potassium consists of 50% potassium-39 and 50% potassium-41.

To know more about potassium, visit:

https://brainly.com/question/13321031#

#SPJ11

Use the drop-down menus to rank the boiling points of the following hydrocarbons. Use a "1" to indicate the compound with the lowest boiling point.

Answers

The boiling points of the hydrocarbons can be ranked as follows;

1. 4

2. 2

3. 3

4. 1

What controls the boiling points of the hydrocarbons?

The size of the molecules and the nature of the intermolecular interactions between the molecules essentially determine the boiling points of hydrocarbons.

Because they have more electrons and a larger surface area available for intermolecular interactions like Van der Waals forces, larger hydrocarbon molecules typically have higher boiling points.

Additionally, polar hydrocarbons and those that can form hydrogen bonds have higher boiling points than non-polar hydrocarbons because of stronger intermolecular forces.

Learn more about hydrocarbons:https://brainly.com/question/31643106

#SPJ1

Review this reaction:
H2SO4+NaOH->?.
What are the products?

Answers

The answer is C. (Na2SO4 & H2O)

An equilibrium mixture at 425°C is found
to consist of 1.83 × 10-3 mol/L of H2,
3.13 × 10-3 mol/L of I2, and 1.77 × 10-2 mol/L
of HI. Calculate the equilibrium constant, K, for
the reaction H2(g) + I2(g) ⇄ 2HI(g).

Answers

The equilibrium constant, K, for the reaction H2(g) + I2(g) ⇄ 2HI(g) can be calculated using the expression K= [HI]2/([H2][I2]). Since the concentrations of H2, I2, and HI are given in the question, we can calculate the equilibrium constant, K, for the reaction.

K = [HI]2/([H2][I2]) = (1.77 × 10-2)2/((1.83 × 10-3)(3.13 × 10-3)) = 4.43 × 104. Therefore, the equilibrium constant, K, for the reaction H2(g) + I2(g) ⇄ 2HI(g) at 425°C is 4.43 × 104.

Using the specified concentrations of H2, I2, and HI, it appears that you have correctly calculated the equilibrium constant, K, for the reaction H2(g) + I2(g) 2HI(g) at 425°C. The ratio of the concentrations of the reactants and products at equilibrium, K, is represented by each concentration being raised to the power of its stoichiometric coefficient.

The concentration of the product, HI, is preferred above the concentrations of the reactants, H2 and I2, at equilibrium, as shown by the value of K = 4.43 104 in this instance. This suggests that at equilibrium, the forward reaction—the creation of HI—is preferred.

It is significant to remember that the equilibrium constant, K, is temperature-dependent, and that temperature changes affect K's value.

Learn more about  equilibrium  at:

https://brainly.com/question/30694482

#SPJ1

1. Using the "octet rule," write the Lewis structures for the following molecules: (a) CH2Cl2 (b) NCl3 (c) CS2 and (d) CH3CHCHCH3 2. The following questions refer to the bolded carbon atom in the molecule: CH3CHCHCH3 a) How many areas of high electron density (number of bonded atoms plus number of lone pairs) surround the indicated C? b) Give the AXmEn notation for the C in this molecule (Look on page 6 of this experiment) c) What is the molecular geometry for the C in this molecule? d) What are the bond angles surrounding C? 3. While obeying the octet rule, nitric acid HNO3, has two resonance structures. Draw them. (Hint: the hydrogen atom is bonded to one of the oxygen atoms)

Answers

1. Using the "octet rule," I will write the Lewis structures for the following molecules:

(a) CH₂Cl₂: H-Cl:C-H
                       |
                       Cl
(b) NCl₃: Cl
              |
         Cl-N-Cl
(c) CS₂:  O=C=S=O
(d) CH₃CHCHCH₃: CH₃-CH-CH-CH₃

2. For the bolded carbon atom in the molecule CH₃CHCHCH₃:
a) There are 3 areas of high electron density surrounding the indicated C (3 bonded atoms and 0 lone pairs).
b) The AXmEn notation for the C in this molecule is AX₃E₀, where m=3 and n=0.
c) The molecular geometry for the C in this molecule is trigonal planar.
d) The bond angles surrounding C are approximately 120 degrees.

3. Obeying the octet rule, nitric acid (HNO₃) has two resonance structures. They can be drawn as:

Resonance Structure 1: O=N-O-H
                                       ||
                                       O

Resonance Structure 2: O-N=O
                                        ||
                                     O-H

Let us learn more in detail.

1.
(a) CH₂Cl₂: Carbon is the central atom with two hydrogen atoms and two chlorine atoms attached. The Lewis structure would be:


Cl   H
|     |
C-H-C-Cl
|     |
H    Cl

(b) NCl₃: Nitrogen is the central atom with three chlorine atoms attached. The Lewis structure would be:


 Cl
 |
Cl-N-Cl
 |
 Cl

(c) CS₂: Carbon is the central atom with two sulfur atoms attached. The Lewis structure would be:
S=C=S

(d) CH₃CHCHCH₃: Carbon is the central atom with three methyl groups and one hydrogen atom attached. The Lewis structure would be:


H   H   H
|   |   |
H-C-C-C-H
|   |   |
H   H   CH₃


3. The two resonance structures for nitric acid HNO₃ would be:

     O-H       O
      |         |
H-O=N         O=N-O
      |         |
     O          O-H

Learn more about the octet rule at https://brainly.com/question/865531

#SPJ11

13. Lab Analysis: You forgot to label your chemicals and do not know whether your unknown solution is strontium nitrate or magnesium nitrate. You use the solutions potassium carbonate and potassium sulfate in order to determine your mistake. unknown + potassium carbonate & unknown + potassium sulfate . What do you observe when the unknown solution is mixed with potassium sulfate? (Can you see the shape underneath?)

Answers

if the unknown solution is mixed with potassium carbonate, the reaction will proceed differently depending on whether the unknown solution is strontium nitrate or magnesium nitrate.

Mixing the unknown solution with potassium sulfate will not provide any useful information to identify whether the unknown solution is strontium nitrate or magnesium nitrate. This is because neither strontium nor magnesium sulfate has distinctive properties that allow them to be easily distinguished from one another.

However, When mixed with strontium nitrate, potassium carbonate will form a white precipitate of strontium carbonate, while no reaction will occur when mixed with magnesium nitrate. Therefore, the presence of a white precipitate after mixing with potassium carbonate indicates that the unknown solution is strontium nitrate.

In summary, to identify whether the unknown solution is strontium nitrate or magnesium nitrate, the solution should be mixed with potassium carbonate. If a white precipitate forms, the solution is strontium nitrate. If no reaction occurs, the solution is magnesium nitrate. Mixing the unknown solution with potassium sulfate will not provide any useful information.

For more such questions on magnesium, click on:

https://brainly.com/question/30333465

#SPJ11

NEED HELP FAST!!!! Please answer both questions

Answers

There is a 0.37 M molarity.

1.71 m molality is present.

Molarity: What is it?

The quantity of a solute in a solution is measured in terms of molarity, a unit of concentration. It is described as the quantity of solutes that dissolve in one liter of solution, or mol/L. Molarity, in other words, reveals how many moles of solute there are in a liter of solution.

To determine molarity, use the following formula:

Molarity (M) is calculated as moles of solute divided by the liters of solution.

100g/180 g/mol * 1/1.5 L is the molarity.

= 0.37 M,

Molality = 200g/58.5g/mol * 1/2 Kg

Learn more about molarity:brainly.com/question/8732513

#SPJ1

2. write out the balanced chemical equation for the reaction of 2 moles of naoh with 1 mole of h3po4

Answers

2NaOH + H₃PO₄ → Na₂HPO₄ + 2H2O is the balanced chemical equation for the reaction between 2 moles of NaOH and 1 mole of H3PO4.

It is clear from the balanced chemical equation that the reaction between 2 moles of NaOH and 1 mole of H₃PO₄ is an acid-base reaction, commonly referred to as a neutralization reaction.

In this reaction, phosphoric acid (H₃PO₄) acts as the acid and sodium hydroxide (NaOH) as the base. Na₂HPO₄ and H2O are created when the base (NaOH) and acid (H₃PO₄) react. Since all the reactants are completely consumed in the reaction and no excess of either reactant is left over, the stoichiometric balance of the number of moles of the acid and base is demonstrated by the balanced chemical equation.

To know more about neutralization reaction, visit,

https://brainly.com/question/23008798

#SPJ4

Silo measure d 640 grams of sulphur which occupies 540ml of container at 47 degree celsius.find the pressure of the gas.​

Answers

The pressure of the gas is 76.8 atm.

The pressure of the gas can be calculated using the ideal gas law formula:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

First, we need to calculate the number of moles of sulfur:

molar mass of sulfur = 32 g/mol

number of moles = mass/molar mass

= 640 g/32 g/mol

= 20 mol

Next, we need to convert the volume from milliliters to liters and the temperature from Celsius to Kelvin:

V = 540 ml = 0.54 L

T = 47°C + 273.15 = 320.15 K

Finally, we can plug in the values and solve for pressure

P = nRT/V

= 20 mol x 0.08206 L atm mol⁻¹ K⁻¹ x 320.15 K / 0.54 L

= 76.8 atm


To know more about ideal gas law, refer here:

https://brainly.com/question/28257995#

#SPJ11

A neutral atom of a certain element has 15 electrons. a. what is the ground state electron configuration of the element?b. how should the element be classified ?c. are the atoms of this element diamagnetic or paramagnetic?

Answers

A neutral atom of the element with 15 electrons is phosphorus with a ground state electron configuration of 1s2 2s2 2p6 3s2 3p3. It is classified as a nonmetal element in group 15. The atoms of this element are diamagnetic, as all electrons are paired up in their orbitals.

A neutral atom is an atom that has an equal number of protons and electrons. In the case of this certain element with 15 electrons, its ground state electron configuration would be 1s2 2s2 2p6 3s2 3p3.

This means that the first shell (n=1) has 2 electrons, the second shell (n=2) has 8 electrons, and the third shell (n=3) has 5 electrons.

Based on its position in the periodic table and the number of valence electrons it has, the element with this electron configuration is phosphorus. Phosphorus is a nonmetal element that belongs to group 15, also known as the nitrogen group.

To determine whether the atoms of this element are diamagnetic or paramagnetic, we need to look at its electron configuration. In this case, we can see that all the electrons are paired up in their respective orbitals, meaning there are no unpaired electrons.

This makes the element diamagnetic, which means it does not have a magnetic field of its own and will not be attracted to a magnetic field.

In summary, a neutral atom of the element with 15 electrons is phosphorus with a ground state electron configuration of 1s2 2s2 2p6 3s2 3p3. It is classified as a nonmetal element in group 15. The atoms of this element are diamagnetic, as all electrons are paired up in their orbitals.

To know more about neutral atom, visit:

https://brainly.com/question/29757010#

#SPJ11

what do you think determines these traits in the lobsters? How could these traits change?

Answers

The traits in lobsters are determined by their genetic makeup and environmental factors.

Natural selection can play a role in changing traits over time.

Which genetic factors are at play?

Genetic factors include inherited traits from their parents such as color, size, and shell density. Environmental factors such as water temperature, salinity, and availability of food can also impact these traits.

For example, lobsters in warmer water tend to grow faster and larger than those in cooler water. Changes in habitat or pollution can also impact the availability of food and water quality, leading to changes in growth rates and physical traits.

Lobsters with advantageous traits, such as stronger shells or better camouflage, are more likely to survive and pass on their genes to the next generation. Over time, these beneficial traits may become more common in the population.

Find out more on lobsters here: https://brainly.com/question/31023189

#SPJ1

use a sheet of paper to answer the following question. take a picture of your answers and attach to this assignment. treatment of pentanedioic (glutaric) anhydride with ammonia at elevated temperature leads to a compound of molecular formula c5h7no2. what is the structure of this product? [hint: you need to think about the reactivity not only of acid anhydrides but also of amides and carboxylic acids]

Answers

The structure of product is shown.

When pentanedioic (glutaric) anhydride reacts with ammonia at high temperature, it undergoes an amide formation reaction to produce a compound with the molecular formula C₅H₇NO₂. The amide formation reaction involves the nucleophilic attack of the ammonia molecule on one of the carbonyl carbon atoms of the anhydride, leading to the formation of an intermediate product called an amide.

This amide then undergoes further reactions to form the final product with the given molecular formula. The presence of both carboxylic acid and amide functional groups in the molecule indicates that it contains both the original anhydride and the product of its reaction with ammonia.

To know more about ammonia, here

brainly.com/question/15719562
#SPJ4

What is the volume of 0.78 mol of CO₂ gas at STP?

Answers

Answer: 17.49L

Explanation:

STP is 1atm and 273.15K

V=nRT/

V=(0.78)(0.0821)(273.15)/1

V= 17.49L

A solution of lithium carbonate reacts with a solution of potassium iodide to produce solid potassium carbonate and aqueous lithium iodide. You measure 3. 9 moles of potassium carbonate produced by the reaction. How much lithium iodide was produced?

Answers

The quantity of lithium iodide produced in the reaction was determined to be 7.8 moles.

The balanced chemical equation for the reaction between lithium carbonate (Li₂CO₃) and potassium iodide (KI) is:

2 Li₂CO₃ + 2 KI → 2 K₂CO₃ + 4 LiI

From the balanced equation, we can see that for every 2 moles of Li₂CO₃ reacted, 4 moles of LiI are produced.

Therefore, if we have 3.9 moles of K₂CO₃, we can calculate the moles of LiI produced as:

3.9 moles K₂CO₃ × (4 moles LiI / 2 moles Li₂CO₃) = 7.8 moles LiI

Therefore, 7.8 moles of lithium iodide were produced in the reaction.

To know more about lithium iodide, refer here:

https://brainly.com/question/2732123#

#SPJ11

A 54.2 g sample of Magnesium has an initial temperature of 55°C and a final temperature of 78°C, and the specific heat of Magnesium is 1.023 J/g°C. If the sample absorbs 1300 J of heat energy, what is the change in temperature?

Answers

Change in temperature of the Magnesium sample is calculated as 23.7°C.

What is meant by heat energy?

Heat energy is a form of energy that is transferred between objects or systems due to temperature difference. It flows from hotter to cooler objects, and its amount is measured in joules.

As we know; Q = m c ΔT

Q is the amount of heat absorbed, m is mass of the object, c is specific heat, and ΔT is change in temperature.

ΔT = Q / (m * c)

ΔT = 1300 J / (54.2 * 1.023 )

ΔT = 23.7°C

Therefore, the change in temperature of the Magnesium sample is 23.7°C.

To know more about heat energy, refer

https://brainly.com/question/934320

#SPJ1

what is the major organic product from the addition reaction of hbr to 2-methyl-2-butene? group of answer choices 2-bromopentane 2-bromo-2-methylbutane 1-bromo-2-methylbutane 1-bromo-3-methylbutane 2-bromo-3-methylbutane

Answers

The addition of HBr to 2-methyl-2-butene is an example of an electrophilic addition reaction. The correct answer is (2)

The double bond in 2-methyl-2-butene is attacked by the electrophilic H+ ion from HBr, leading to the formation of a carbocation intermediate. The bromide ion (Br-) then attacks the carbocation, leading to the formation of a new carbon-bromine bond. The major organic product obtained from the addition reaction of HBr to 2-methyl-2-butene is 2-bromo-2-methylbutane, which is also known as t-butyl bromide. This is because the addition of HBr occurs at the tertiary carbon, leading to the formation of a tertiary carbocation intermediate, which is relatively stable. Therefore, the correct answer is (2) 2-bromo-2-methylbutane.

To know more about electrophilic addition reaction, here

brainly.com/question/16811879

#SPJ4

--The complete Question is, what is the major organic product from the addition reaction of hbr to 2-methyl-2-butene? group of answer choices

1. 2-bromopentane 2-bromo-2-methylbutane

2. 1-bromo-2-methylbutane

3. 1-bromo-3-methylbutane

4. 2-bromo-3-methylbutane=--

If you have 16 moles of o2 in a balloon what is the volume of oxygen in the balloon

Answers

If you have 16 moles of O2 in a balloon at 25°C and 1 atm, the volume of oxygen in the balloon is 390.5 liters.

The volume of oxygen in a balloon containing 16 moles of O2 depends on the temperature and pressure of the gas. To find the volume, we can use the ideal gas law equation PV = nRT, where P is the pressure of the gas, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

Assuming the temperature and pressure are constant, we can rearrange the equation to solve for volume: V = nRT/P. The value of R is 0.0821 L·atm/mol·K.

Let's assume that the temperature is 25°C, or 298 K, and the pressure is 1 atm. Plugging in the values, we get:

V = (16 mol)(0.0821 L·atm/mol·K)(298 K)/(1 atm)

V = 390.5 L

Therefore, if you have 16 moles of O2 in a balloon at 25°C and 1 atm, the volume of oxygen in the balloon is 390.5 liters.

To know more about moles, visit:

https://brainly.com/question/31597231#

#SPJ11

2. What factors determine the rate at which a substance dissolves?

Answers

Answer:

Temperature

Agitation

Particle size

Explanation:

Which words would be under the subheading "Ingredients"?

(Heading) Old Hunting Recipe for Rhinoceros Stew

(Subheading) Ingredients:


hair
broth
pepper
rhinoceros
hare
salt
water
onions

Answers

The words listed under the subheading "Ingredients" for the recipe "Old Hunting Recipe for Rhinoceros Stew" would be: Rhinoceros, Hare, Onions, Water, Broth, Salt, Pepper, and Hair.

What word would be listed?

Under the subheading "Ingredients" for the recipe "Old Hunting Recipe for Rhinoceros Stew," the following words would be listed:

RhinocerosHareOnionsWaterBrothSaltPepper

Hair (Note: this is an unusual ingredient and may be questioned as to its necessity in the recipe)

Learn more about Ingredients here: https://brainly.com/question/28000963

#SPJ1

You're given an unknown acid and told that it will donate one proton per molecule. When 1. 0 g of this acid is dissolved in water, the resulting solution requires 50. 0 ml of a 0. 25 M solution of NaOH for neutralization. What's the molecular mass of the unknown acid? Explain. (Hint: Find the moles of acid present)

Answers

The molecular mass of the unknown acid is 100 g/mol.

To find the molecular mass, first determine the moles of acid present. Since 50.0 mL of 0.25 M NaOH is required for neutralization, calculate the moles of NaOH using the formula: moles = Molarity × Volume (in L).

Moles of NaOH = 0.25 mol/L × (50.0 mL × 0.001 L/mL) = 0.0125 mol

Since the acid donates one proton per molecule, the moles of acid present equal the moles of NaOH: 0.0125 mol.

Next, find the mass of one mole of the unknown acid. You have 1.0 g of the acid, so divide the mass by the moles to get the molecular mass:

Molecular mass = Mass / Moles = 1.0 g / 0.0125 mol = 100 g/mol

To know more about molecular mass click on below link:

https://brainly.com/question/31476184#

#SPJ11

Use the electron-transfer method to balance this equation:


solid copper and dilute nitric acid react to produce copper(ii) nitrate, water, and nitrogen monoxide gas (no)

Answers

The electron-transfer method is a way to balance chemical reactions by assigning oxidation numbers to each element and then transferring electrons between the two sides of the equation until the number of electrons is equal on both sides.

In this case, the reactants are solid copper and dilute nitric acid, which will produce copper(II) nitrate, water, and nitrogen monoxide gas (NO).

The first step is to assign oxidation numbers to the elements. For copper, the oxidation number is 0, for nitrogen it is +3, for oxygen it is -2, and for hydrogen it is +1.

The next step is to transfer electrons between the two sides of the equation so that the number of electrons on each side is equal. In this case, we can transfer two electrons from the reactant side to the product side. This will result in the equation being balanced, with the copper being reduced to 0 and the nitrogen being oxidized to +5.

The balanced equation would look like this:

Cu + 4HNO3 → Cu(NO3)2 + 2H2O + 2NO

The electron-transfer method is a simple, effective way to balance chemical equations.

By assigning oxidation numbers and transferring electrons between the reactants and products, we can ensure that the equation is balanced and all atoms are conserved.

Know more about Nitric acid here

https://brainly.com/question/29769012#

#SPJ11

A sample of 0. 0400 mol potassium hydroxide, KOH was dissolved in water to yield 20. 0 mL of solution. What is the molarity of the solution?



0. 4M


250M


2. 0M


2. 00x 10-3M

Answers

The molarity of the potassium hydroxide solution is 2.0 M.

We know that, Molarity (M) = moles of solute (mol) / volume of solution (L)

We have 0.0400 mol of KOH dissolved in 20.0 mL of water.

Volume of the solution= 20.0 mL = 20.0 / 1000 = 0.0200 L

Therefore, molarity = (0.0400 mol) / (0.0200 L) = 2.0 M

So, the molarity of the potassium hydroxide solution is 2.0 M.

Thus, option 3 is the correct answer.

To know more about molarity visit:

https://brainly.com/question/8732513

#SPJ11

Other Questions
Convers Corporation (calendar year-end) acquired the following assets during the current tax year: (ignore 179 expense and bonus depreciation for this problem): (Use MACRS Table 1, Table 2 and Table 5. )AssetDate Placed in ServiceOriginal BasisMachineryOctober 25$ 92,000Computer equipmentFebruary 332,000Delivery truck*March 1745,000FurnitureApril 22172,000Total$ 341,000*The delivery truck is not a luxury automobile. In addition to these assets, Convers installed new flooring (qualified improvement property) to its office building on May 12 at a cost of $520,000. A. What is the allowable MACRS depreciation on Converss property in the current year assuming Convers does not elect 179 expense and elects out of bonus depreciation? (Round your intermediate calculations and final answer to the nearest whole dollar amount. ) Paused Egoism is an example of virtues. True False What is the reason behind scientist jagadish chandra bose not being recognized as the inventor of radio?. What is your opinion of "hazing" in high school sports? Where should the line be drawn? Summarize your answer. Sophie deposited money into an account in which interest is compounded semiannually at a rate of 3.3%. She made no other deposits or withdrawals and the total amount in her account after 11 years was $19,786.19. How much did she deposit? Round answer to nearest whole number. Do not include units in the answer. Be sure to attach your work for credit. write a letter to your head teacher of your school and three deviant behavior amongst student Marvin Gaye Company has been having difficulty obtaining key raw materials for its manufacturing process. The company therefore signed a long-term noncancelable purchase commitment with its largest supplier of this raw material on November 30, 2020, at an agreed price of $400,000. At December 31, 2020, the raw material had declined in price to $365,000. What entry would you make on December 31, 2020, to recognize these facts? Why are Africans adopting to European languages instead of their own languages? The best choice of supply chain is one that is in line with the company's marketing strategy and blank______ Particles q1, q2, and q3 are in a straight line. Particles q1 = -5. 00 x 10^-6 C, q2 = +2. 50 x 10^-6 C You get a job as a nurse. Your salary for the first year is $74,000. You willreceive a 1.2% increase every year. If you could save your entire salary, howmuch money would you have in 5 years? Round to the nearest cent (2 decimalplaces). Hint: What is a? What is r? Then use the formula for a finitegeometric series. The number of views on a viral video can be modeled by the functionG(t) = 15(4)+3. Write an equivalent function of the form G'(t) = abt. Help there is a picture of it What is one way eleanor of aquitaine built her power as a monarch? question 4 options: through treaties though marriage through conquest through wise purchases of land The unit cube is divided into identical rectangular prisms. What is the volume of one of the identical prisms? Living organisms depend on the environment and each other. What would happen to plants if bacteria were completely removed from soil?A.They would not be able to perform photosynthesis.B.They would not be able to perform cellular respiration.C.They would not be able to produce sufficient proteins.D.They would not be able to take water up into their roots. The value of y varies directly with x. which function represents the relationship between x and y if y = 18/5 when x = 24 How many total standards are presented in the Scope and Standards of Practice? 10 18 12 6 AG CLASS HELP ME!!!!!!!!!Complete the following sentence. A landscape ____________________ provides organization and labor to install the plants and hardscape elements of a landscape, and may also provide the original design. sorry no options to give Hudson is designing a new board game, and is trying to figure out all the possibleoutcomes. How many different possible outcomes are there if he spins a spinner withthree equal-sized sections labeled Walk, Run, Stop and spins a spinner with 5 equal-sized sections labeled Monday, Tuesday, Wednesday, Thursday, Friday?