Answer:
Did you ask the question and answer it for yourself?
Answer:
Your amazing thank you, A was right.
This square solenoid has sides length 25 cm, and 100 turns of wire. The resistance is 10 ohms. Find the magnitude of the induced emf in the coil if the magnetic field of 10 T is passing through the face of the loop as pictured. What is the induced current in the wire. Find the emf and current if the solenoid was a circle with radius 25 cm instead of a square.
Explanation:
Area of square = 25^2 = 625 cm^2 or = 0.0625 m^2
number of turns = 100
Solenoid resistance = 10 ohms
now we know , Φ = B.A
where , Φ = magnetic flux, B= magnetic field strength, and A = area.
Φ = 10 × 0.0625 = 0.625 W
induced emf ε = dΦ/dt = d(BA)/dt =0
This is because both B and A are constants.
⇒ Induced current is also zero.
Replacing square by a circle will not change situation as the value of B and A will remain constant with time hence, no emf induced, so no current induced.
4. If the cooling of magma takes place slowly beneath Earth's surface, the rock is that is formed
is called
a. extrusive igneous rock
b. intrusive igneous rock
c. sedimentary rock
d. metamorphic rock
What instrument makes the slowest vibration? A drum? A whistle? A flute? Or a harmonica?
Answer:
A harmonica.
Explanation:
The structure of a harmonica is built in such a way that when the air is blown by the player in it, the air moves within the rectangular structure and making sound vibrations. Sound is heard when an object vibrates. The movement of this vibration creates sound waves, and these waves enter our ears in the form of music.
Therefore, the instrument that will make the slowest vibration among the given instrument will be the harmonica. Thus option D is correct.
During a lab experiment, a student took his resting pulse rate, counting 25 beats in 20 seconds. What was the student's pulse rate in beats per minutes (bpm)?
Answer:
75 bpm
Explanation:
60 seconds in a minute
60seconds / 20 seconds = 3
25 beats * 3 = 75 bpm
When the frequency of a sound wave is doubled, then:
Answer:
If the frequency of a wave is doubled, what happens to its wavelength? If the frequency is doubled, the wavelength is only half as long.
Hey,
QUESTION)✔ We have : λ = v/f
According to this relationship, the wavelength is inversely proportional to the frequency. So when the frequency doubles, the wavelength is halved.
A marble at the front of a truck bed traveling at 20 m/s relative to the highway rolls toward the back of the truck bed with a speed of 7m/s relative to the truck bed. What is the velocity of the marble relative to the highway?
A) how many cm³ are there in 0.08L?
B) How many dm³ are there in 750mL?
Answer:
A) 80 cm³
B) 0.75 dm³
Explanation:
I hope this help❤️
Assume a uniformly charged ring of radius R and charge Q produces an electric field Ering at a point P on its axis, at distance x away from the center of the ring. Now the charge Q is spread uniformly over the circular area the ring encloses, forming a flat disk of charge with the same radius. How does the field Edisk produced by the disk at P compare to the field produced by the ring at the same point?Assume a uniformly charged ring of radius R and charge Q produces an electric field Ering at a point P on its axis, at distance x away from the center of the ring. Now the charge Q is spread uniformly over the circular area the ring encloses, forming a flat disk of charge with the same radius. How does the field Edisk produced by the disk at P compare to the field produced by the ring at the same point?
Answer:
* E_ring = [tex]k \ \frac{x}{(x^2+ y^2)^{3/2} } \ Q[/tex]
*E_ disk= 2kQ [tex]\frac{1}{R^2} \ (1 - \frac{x}{(x^2+ R^2)^{1/2} } )[/tex]
Explanation:
Let's start by finding the electric field of the charged ring
in the attachment we can see a diagram of the system. Due to circular symmetry, the electric field perpendicular to the axis is canceled and only the electric field remains parallel to the axis.
Eₓ = E cos θ (1)
E = k ∫ [tex]\frac{dq}{r^2}[/tex]
cos θ = x / r
using the Pythagorean theorem
r = [tex]\sqrt{x^2 + y^2}[/tex]
we substitute
Eₓ = k ∫ [tex]\frac{dq}{x^2+y^2} \ \frac{x}{\sqrt{ x^2+y^2} }[/tex]
Eₓ = [tex]k \frac{x}{(c^2+y^2)^{3/2} }[/tex] ∫ dq
Eₓ = k \frac{x}{(c^2+y^2)^{3/2} } Q
the ring's electric field
E_ring = [tex]k \ \frac{x}{(x^2+ y^2)^{3/2} } \ Q[/tex]
Now let's find the electric field of the disk
The charge is distributed over the entire disk, so let's use the concept of charge density
σ = [tex]\frac{dq}{dA}[/tex]
Let's approximate the disk as a group of rings, the width of each ring is dr, the area is
dA = 2πr dr
we substitute
σ = [tex]\frac{1}{2\pi r} \ \frac{dq}{dr}[/tex]
dq = 2π σ r dr
we substitute in equation 1, where the electrioc field is of each ring
Eₓ = [tex]k \int\limits^R_0 \ { \frac{x}{(x^2+r^2)^{3/2} } \ 2\pi \sigma \ r } \, dr[/tex]
if we use a change of variable
dv = 2rdr
v = r²
Eₓ = [tex]k x \pi \sigma \int\limits^a_b { \frac{1}{(x^2+v)^{3/2} } } \, dv[/tex]
we integrate
Eₓ = k x π σ [tex][ \frac{ (x^2 + r^2)^{-1/2} }{-1/2} ][/tex]
we value in the limits from r = 0 to r = R
Eₓ = k π σ x (-2) [ [tex]\frac{1}{ \sqrt{x^2+R^2} } - \frac{1}{x}[/tex]]
Eₓ = 2π k σ ([tex]1 - \frac{x}{(x^2 + R^2 ) ^{1/2} }[/tex] )
σ = Q/πR²
substitute
Eₓ = 2 k Q/R² (1 - \frac{x}{(x^2 + R^2 ) ^{1/2} } )
E_ disk= 2kQ [tex]\frac{1}{R^2} \ (1 - \frac{x}{(x^2+ R^2)^{1/2} } )[/tex]
The two electric fields are
* E_ring = [tex]k \ \frac{x}{(x^2+ y^2)^{3/2} } \ Q[/tex]
*E_ disk= 2kQ [tex]\frac{1}{R^2} \ (1 - \frac{x}{(x^2+ R^2)^{1/2} } )[/tex]
we can see that the functional relationship of the two fields is different
A pail in a water well is hoisted by means of a frictionless winch, which consists of a spool and a hand crank. When Jill turns the winch at her fastest water-fetching rate, she can lift the pail the 26.0 m to the top in 12.0 s. Calculate the average power supplied by Jill's muscles during the upward ascent. Assume the pail of water when full has a mass of 6.50 kg. W
Answer:
140.83 W
Explanation:
From the question given above, the following data were obtained:
Height (h) = 26 m
Time (t) = 12 s
Mass (m) = 6.50 Kg
Power (P) =?
Power is simply defined as the rate at which energy is used up. Mathematically, it is expressed as:
Power (P) = Energy (E) / Time (t)
But:
Energy (E) = mass (m) × acceleration due to gravity (g) × height (h)
E = mgh
P = E/t
P = mgh / t
With the above formula i.e
P = mgh / t
We can obtain the power supplied by Jill's muscles as follow:
Height (h) = 26 m
Time (t) = 12 s
Mass (m) = 6.50 Kg
Acceleration due to gravity (g) = 10 m/s²
Power (P) =?
P = mgh / t
P = 6.5 × 10 × 26 / 12
P = 140.83 W
Therefore, the power supplied by Jill's muscles is 140.83 W
5. It takes
to get a job done.
Answer:
determination
Explanation:
Look at the circuit diagram. What does the diagram show?
Answer:
the second one i gues
Explanation:
the stripes tells about the batery input/ the x is the lightbulbs/ and two switches
We can model a pine tree in the forest as having a compact canopy at the top of a relatively bare trunk. Wind blowing on the top of the tree exerts a horizontal force, and thus a torque that can topple the tree if there is no opposing torque. Suppose a tree's canopy presents an area of 9.0 m2 to the wind centered at a height of 7.0 m above the ground. (These are reasonable values for forest trees.)
Answer:
A,)FD= 114.1N
B)Torque=798.5Nm
Explanation:
We can model a pine tree in the forest as having a compact canopy at the top of a relatively bare trunk. Wind blowing on the top of the tree exerts a horizontal force, and thus a torque that can topple the tree if there is no opposing torque. Suppose a tree's canopy presents an area of 9.0 m^2 to the wind centered at a height of 7.0 m above the ground. (These are reasonable values for forest trees.)
If the wind blows at 6.5 m/s, what is the magnitude of the drag force of the wind on the canopy? Assume a drag coefficient of 0.50 and the density of air of 1.2 kg/m^3
B)What torque does this force exert on the tree, measured about the point where the trunk meets the ground?
A)The equation of Drag force equation can be expressed below,
FD =[ CD × A × ρ × (v^2/ 2)]
Where CD= Drag coefficient for cone-shape = 0.5
ρ = Density
Area of of the tree canopy = 9.0 m^2
density of air of = 1.2 kg/m^3
V= wind velocity= 6.5 m/s,
If we substitute those values to the equation, we have;
FD =[ CD × A × ρ × (v^2/ 2)]
F= [ 0.5 × 9.0 m^2 × 1.2 kg/m^3 ( 6.5 m/s/ 2)]
FD= 114.1N
B) the torque can be calculated using below formula below
Torque= (Force × distance)
= 114.1 × 7
= 798.5Nm
mention the characteristics of small scale business(any5)
Explanation:
plzzzz mark me brainliest if it helps you then
Can light have inertia??
Answer:
Yes.
Explanation:
Yes Light has inertia, since inertia is in units of mass.
NEED HELP ASAP!!!
-The difference between chemical reactions and nuclear reactions
-The difference between fission and fusion
-What is given off during nuclear decay (how elements change into others)
-How to calculate half life or amount of sample left from half life
Explanation:
Chem has to do with stored energy while nucleic deals with nucleic reactions.
A human body consists of
Answer:
60% of the human adult body is water. According to H.H. Mitchell, Journal of Biological Chemistry 158, the brain and heart are composed of 73% water, and the lungs are about 83% water. The skin contains 64% water, muscles and kidneys are 79%, and even the bones are watery: 31%.
Explanation:
PLEASE HELP ME WITH THIS ONE QUESTION
A tuning fork of 500 Hz is struck in a room with a speed of sound of 340 m/s. What is the distance between a point of rarefaction and the next compression point, in the resulting sound?
Answer:
0.34 m
Explanation:
From the question,
v = λf................ Equation 1
Where v = speed of sound, f = frequency, λ = Wave length
Make λ the subject of the equation
λ = v/f............... Equation 2
Given: v = 340 m/s, f = 500 Hz.
Substitute these values into equation 2
λ = 340/500
λ = 0.68 m
But, the distance between a point of rarefaction and the next compression point, in the resulting sound is half wave length
Therefore,
λ/2 = 0.68/2
λ/2 = 0.34 m
Hence, the distance between a point of rarefaction and the next compression point, in the resulting sound is 0.34 m
Which of the following is an example of an ascribed status?
Multiple Choice
1. musician
2. poor
3. female
4. college student
From the given options the best example of an ascribed status will be poor. Hence, option 2 is the correct one.
What is ascribed status?In sociology, the term "ascribed status" refers to a human's social standing as it is either allocated to them at birth or implicitly assumed in later life. The position of status is one that a person neither chooses for themselves nor earns. Instead, the position is decided upon in accordance with cultural and societal norms and standards. No matter how hard you try or how much you want to, these slots are filled. These fixed social designators are independent of the favorable or unfavorable stereotypes associated with one's assigned statuses and stay unchanged throughout a person's life.
Every society engages in the process of classifying people into categories based on factors including gender, race, family history, and ethnicity. This process is cross-cultural.
To know more about ascribed status:
https://brainly.com/question/9382045
#SPJ6
An important news announcement is transmitted by radio waves to people who are 46 km away, sitting next to their radios, and by sound waves to people sitting across the newsroom, 2.1 m from the newscaster. Take the speed of sound in air to be 348 m/s. What is the difference in time that the message is received
Answer:
[tex]0.005847\ \text{s}[/tex]
Explanation:
Radio waves travel at the speed of light
[tex]c[/tex] = Speed of light = [tex]3\times 10^8\ \text{m/s}[/tex]
[tex]d_r[/tex] = Distance between two radios = 46 km
[tex]v[/tex] = Speed of sound in air = 348 m/s
[tex]d_s[/tex] = Distance sound travels across the newsroom = 2.1 m
Time taken by the radio signal to reach the required location is
[tex]t_r=\dfrac{d_r}{c}\\\Rightarrow t_r=\dfrac{46\times 10^3}{3\times 10^8}\\\Rightarrow t_r=0.000153\ \text{s}[/tex]
Time taken by sound to reach the required location is
[tex]t_s=\dfrac{d_s}{v}\\\Rightarrow t_s=\dfrac{2.1}{348}\\\Rightarrow t_s=0.006\ \text{s}[/tex]
The time difference is
[tex]t_s-t_r=0.006-0.000153=0.005847\ \text{s}[/tex]
The difference in time that the message is received is [tex]0.005847\ \text{s}[/tex].
(WILL MARK BRAINLIAST)( 1 answer question.. look the photo)
As the cars come closer together, the amount of potential energy in the system:
-Increases
-Decreases
-Stays the same
Answer:
increases
Explanation:
due to less speed
a girl runs and cover a distance of 200m in 20 secends.The speed of the girl is ................ m/s.
Speed = distance/time
Speed = (200m)/(20s)
Speed = 10 m/s
A 1.6-kg ball is attached to the end of a 0.40-m string to form a pendulum. This pendulum is released from rest with the string horizontal. At the lowest point of its swing, when it is moving horizontally, the ball collides with a 0.80-kg block initially at rest on a horizontal frictionless surface. The speed of the block just after the collision is 3.0 m/s. What is the speed of the ball just after the collision?a. 1.5 m/sb. 1.3 m/sc. 2.1 m/sd. 1.1 m/se. 1.7 m/s
Answer:
a. 1.5 m/s
Explanation:
We will apply the law of conservation of energy in this situation between the initial position and the lowest point of the swing:
[tex]m_{1}u_{1} + m_{2}u_{2} = m_{1}v_{1} + m_{2}v_{2}\\[/tex]
where,
m₁ = mass of ball = 1.6 kg
m₂= mass of block = 0.8 kg
u₁ = initial speed of ball = 0 m/s
u₂ = initial speed of block = 0 m/s
v₁ = final speed of ball = ?
v₂ = final speed of block = 3 m/s
Therefore,
[tex](1.6\ kg)(0\ m/s)+(0.8\ kg)(0\ m/s)=(1.6\ kg)(v_{1})+(0.8\ kg)(3\ m/s)\\\\v_{1} = \frac{2.4\ N.s}{1.6\ kg}\\[/tex]
v₁ = 1.5 m/s
Therefore, the correct option is:
a. 1.5 m/s
two identical neutral metal spheres rest on an isolated table if you wanted to give it a net positive charge while spear to is given a net negative charge Which statement explains the movement of charges during the charging process
Answer:
its c
Explanation:
finger bones do not have joints true or false
Explanation:
Finger bones have joints.
Answer: true , finger bones have joints
Explanation:
. What is the height in meters of a 5'4" person?
Answer:
1.62 meters
Explanation:
For an approximate result, divide the feet (height) by 3.3 to get your approximate meters (height).
describe how electrons create electricity
describe how electrons create electricity
Atoms are made up of even smaller elements, called protons, electrons and neutrons. When electrical and magnetic forces move electrons from one atom to another, an electrical current is formed
Electrons in atoms can act as our charge carrier, because every electron carries a negative charge. If we can free an electron from an atom and force it to move, we can create electricity. ... In its balanced state, copper has 29 protons in its nucleus and an equal number of electrons orbiting around it.
Hope It Helps!
12. A baseball (m = 0.14 kg) with initial velocity of -40 m/s (90 mph) is hit. It leaves the bat with a velocity of 60m/s after 0.001s. What is the impulse and average net force applied to the ball by the bat?
Answer:
the impulse is 14 kg-m/s and the net force applied is 14000 N
Explanation:
Given that,
The mass of a baseball, m = 0.14 kg
Initial velocity of the baseball, u = -40 m/s
Final velocity, v = 60 m/s
Time, t = 0.001 s
We need to find the impulse and average net force applied to the ball by the bat.
Impulse = change in momentum
i.e.
J = m(v-u)
J = 0.14 × (60-(-40))
J = 14 kg-m/s
Now,
J = Ft
F is average force applied to the ball
So,
[tex]F=\dfrac{J}{t}\\\\F=\dfrac{14}{0.001}\\\\F=14000\ N[/tex]
So, the impulse is 14 kg-m/s and the net force applied is 14000 N.
what is the reason for timing more than one oscillation in a simple pendulum
Answer:
Time period is the time taken by the body to complete one oscillation and it is noted more than once to get accurate reading from averaging of all the observed values.
Air plane travels 224 in 2 hours.
How fast was the plane traveling?
Answer:
112mph
Explanation:bugyg
An instrument that produces an electric current in the presence of
a radioactive substance is called a
a. particle accelerator.
b. Geiger counter.
c. cloud chamber.
d. bubble chamber.
Answer:
Option B, Geiger counter
Explanation:
