Answer:
B.a fire hydrant
hope it helps!
Answer:
a veterinarian
Explanation:
i think
If a solution containing 24.0 g of a substance reacts by first-order kinetics, how many grams remain after three half-lives?
Answer:
3.0g remain
Explanation:
The half-life is defined as the time required for a reactant to decrease its concentration in exactly the half of the initial amount of reactant. Having this in mind:
In one half-life, the mass will be:
24.0g / 2 = 12.0g
In two half-lifes:
12.0g / 2 = 6.0g
And in three half-lifes, the mass that remain is:
6.0g / 2 =
3.0g remainWhat is the half life of the graphed material?
Answer:
3 hours
Explanation:
To know the the correct answer to the question given above, it is important we know the definition of half-life.
The half-life of a substance is simply defined as the time taken for half the substance to decay.
Considering the diagram given above, the initial mass of the substance is 100 g.
Half of the initial mass = 100 / 2 = 50 g
Now, we shall determine the time from the graph taken to get to 50 g.
Considering the diagram given above, the time taken to get to 50 g is 3 hours.
Therefore, the half-life of the material is 3 hours.
a log burns to ashes in a fireplace what kind of change is this
Answer:
A log burning to ashes is a chemical change.
Explanation:
Answer:
Chemical Change
Explanation:
Burning of wood is a chemical change as new substances which cannot be changed back [e.g. carbon dioxide] are formed. For example, if wood is burned in a fireplace, there is not wood anymore but ash.
Consider the reaction: S(s) O2(g)SO2(g) Write the equilibrium constant for this reaction in terms of the equilibrium constants, Ka and Kb, for reactions a and b below: a.) 2 S(s) 3 O2(g) 2 SO3(g) Ka b.) SO2(g) 1/2 O2(g) SO3(g) Kb
Answer:
[tex]Ka=\frac{[SO_3]^2}{[O_2]^3} \\\\Kb=\frac{[SO_3]^3}{[SO_2][O_2]^{1/2}}[/tex]
Explanation:
Hello!
In this case, according to the reactions:
a.) 2 S(s) 3 O2(g) ⇔ 2 SO3(g) Ka
b.) SO2(g) + 1/2 O2(g) ⇔ SO3(g) Kb
Thus, according to the law of mass action, we can write Ka and Kb as follows:
[tex]Ka=\frac{[SO_3]^2}{[O_2]^3} \\\\Kb=\frac{[SO_3]^3}{[SO_2][O_2]^{1/2}}[/tex]
Whereas solid carbon is not inserted in the equilibrium expression.
Best regards!
Hydroxylamine hydrochloride is a powerful reducing agent which is used as a polymerization catalyst. It contains 5.80 mass % H, 20.16 mass % N, 23.02 mass % O, and 51.02 mass % Cl. What is its empirical formula? Determine the molecular formula of the compound with molar mass of 278 g.
Answer: The molecular formula will be [tex]H_{16}NOCl[/tex]
Explanation:
If percentage are given then we are taking total mass is 100 grams.
So, the mass of each element is equal to the percentage given.
Mass of H = 5.80 g
Mass of N = 20.16 g
Mass of O = 23.02 g
Mass of Cl = 51.02 g
Step 1 : convert given masses into moles.
Moles of H =[tex]\frac{\text{ given mass of H}}{\text{ molar mass of H}}= \frac{5.80g}{1g/mole}=5.80moles[/tex]
Moles of N =[tex]\frac{\text{ given mass of N}}{\text{ molar mass of N}}= \frac{20.16g}{14g/mole}=1.44moles[/tex]
Moles of O =[tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{23.02g}{16g/mole}=1.44moles[/tex]
Moles of Cl =[tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{51.02g}{35.5g/mole}=1.44moles[/tex]
Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.
For H = [tex]\frac{5.80}{1.44}=4[/tex]
For N = [tex]\frac{1.44}{1.44}=1[/tex]
For O = [tex]\frac{1.44}{1.44}=1[/tex]
For Cl = [tex]\frac{1.44}{1.44}=1[/tex]
The ratio of H: N: O: Cl= 4: 1: 1: 1
Hence the empirical formula is [tex]H_4NOCl[/tex]
The empirical weight of [tex]H_4NOCl[/tex] = 4(1)+1(14)+ 1(16) + 1(35.5)= 69.5 g.
The molecular weight = 278 g/mole
Now we have to calculate the molecular formula.
[tex]n=\frac{\text{Molecular weight }}{\text{Equivalent weight}}=\frac{278}{69.5}=4[/tex]
The molecular formula will be=[tex]4\times H_4NOCl=H_{16}NOCl[/tex]
The proteins of all living things require
geometry of amino acids.
As the building blocks of proteins , amino acids are linked to almost every life process, but they also have key roles as precursor compounds in many physiological processes.
Answer:
L
Explanation:
No pain no gain . which figure of speech is this
Answer:
No pain, no gain is a proverb that means in order to make progress or to be successful, one must suffer. This suffering may be in a physical or mental sense. The phrase no pain, no gain was popularized in the 1980s by the American actress, Jane Fonda.
Oxygen and hydrogen are both elements that are found as gases at room temperature. When oxygen combines with hydrogen, they produce the compound water according to the chemical equation below.
O2 + 2 H2 2 H2O
Water is a liquid at room temperature. This example shows that in a chemical equation, the substance that is produced
A.
has properties that are different from the original substances.
B.
can only contain a single type of element.
C.
contains fewer types of elements than the original substances.
D.
always has the same properties as the original substances.
Answer:
A
Explanation:
has properties that are different from the original substances.
WHEN YOU SEE A BLUE CAR WHAT COLER IS BEING REFLECTED
Answer:
violet
Explanation:
just violet
oh and you spelled "COLER" wrong, its color or colour if you live somewhere else
When a chemical reaction occurs, what happens to the atoms of the two substances?
Answer:
In a chemical reaction, only the atoms present in the reactants can end up in the products. No new atoms are created, and no atoms are destroyed. In a chemical reaction, reactants contact each other, bonds between atoms in the reactants are broken, and atoms rearrange and form new bonds to make the products.
Explanation:
Enter the electron configuration for I+ using noble gas shorthand notation.
In the first box enter the noble gas (notice the brackets). In the following boxes enter the number that goes in front of the orbital followed by the superscript.
For example, the electron configuration for sulfur is: [Ne]3s2 3p4
so the first box would have Ne in it followed by 3, then 2, then 3 then 4.
If you do not need an orbital, just enter 0 (zero) in the boxes for the coefficient and superscript.
[ ] s f d p
Find the element in the periodic table and count over
to the right the number of negative charges on your anion.
This element has the same electron configuration as your anion.
Which noble gas precedes the element? Knowing the s, p, d, and f blocks
of elements in the periodic table, deduce the the electron configuration
of the element from the preceding noble gas. Remember that the
1p 1d, 2d, 1f, 2f, and 3f orbitals are forbidden energy levels (they do not exist).
Answer:
[Kr] 4d10 5s2 5p4
Explanation:
The Symbol I represents Iodine. It has atomic number of 53. The full electronic configuration is given as;
1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p5
However the question requested for the configuration of I+.
I+ is a cation and it simply refers to an iodine atom that has lost a single electron. The electronic configuration of I+ is given as;
1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p4
Using Noble gas shorthand representation, we have;
[Kr] 4d10 5s2 5p4
Starting with 5.00 g barium chloride n hydrate yields 4.26 g of anhydrous barium chloride after heating. Determine the integer n.
Answer:
BaCl₂·(H₂O)₂
Explanation:
The reaction that takes place is:
BaCl₂·(H₂O)ₙ → BaCl₂ + nH₂OThe information given by the problem tells us that 5.00 g of reactant were consumed. Of those 5.00 g, 4.26 g were converted into BaCl₂, this means that the other 0.74 g were converted into water.
We convert 0.74 g of water into moles, using its molar mass:
0.74 g H₂O ÷ 18 g/mol = 0.041 mol H₂OThen we convert 4.26 g of BaCl₂ into moles:
4.26 g BaCl₂ ÷ 208.23 g/mol = 0.0204 mol BaCl₂We can write these results as (BaCl₂)₀.₀₂·(H₂O)₀.₀₄. We multiply those coefficients by 50 in order to make them integers, and we're left with:
BaCl₂·(H₂O)₂A chemist determined by measurements that 0.0650 moles of gallium participated in a chemica reaction. Calculate the mass of gallium that participated in the chemica reaction
Answer:
4.53gm
Explanation: n=m/M
n is # of moles
m is mass
M is molar mass
so m=n*M when you rearrange the equation
Methyl isocyanate, shown as resonance structure 1, can also be represented by other resonance structures. Draw the next most important resonance contributor. Then add curved arrows to each structure to show delocalization of electron pairs to form the other structure.
Include lone pairs of electrons, formal charges, and hydrogen atoms. You can add condensed hydrogens using the More menu, selecting +H and clicking on the carbon as many times as needed.
Solution :
Structure I
The formal charge on both Carbon (C) atom is = 4 valance [tex]$e^-$[/tex] - bonds = 0
Formal charge (O) = 6 V.E - 2 bonds - 4 non bonding electrons = 0
Formal charge on (N) = 5 V.E - 3 bonds - 2 non bonding electrons = 0
F.C. on H = 1 V.E. - 1 bond = 0
Overall charge on the molecule = 0 charge
Structure II
Formal charge on both C atom = 4 valence [tex]$e^-$[/tex] - 4 bonds = 0
Formal charge (O) = 6 V.E. - 1 bonds - 6 non bonding electrons = -1 charge
Formal charge on (N) = 5 V.E. - 4bonds - 0 non bonding electrons = +1 charge
F.C on H = 1 V.E. - 1 bond = 0
Overall charge on the molecule = +1 -1
= 0 charge
Using the van der Waals equation, determine the pressure exerted by 4.30 mol Ar in 3.6 L at 325K.
Answer:
37.7 atm
Explanation:
Using the relation;
(P + an^2/V^2) (V - nb) = nRT
(P + an^2/V^2) = nRT/(V - nb)
a = 0.0341 atm dm^2 Mol^2
b = 0.0237 dm/mol
P = nRT/(V - nb) - an^2/V^2
P = [4.3 * 0.082 * 325 / (3.6 - (4.3 * 0.0237))] - (0.0341 * (4.3^2))/(3.6^2)
P = 114.595/(3.498) - 0.0487
P = 37.7 atm
A chemistry student is given 650. mL of a clear aqueous solution at 33.°C. He is told an unknown amount of a certain compound X is dissolved in the solution. The student allows the solution to cool to 17.9 0C. At that point, the student sees that a precipitate has formed. He pours off the remaining liquid solution, throws away the precipitates, and evaporates the water from the remaining liquid solution under vacuum. More precipitate forms. The student washes, dries and weighs the additional precipitate. It weighs 0.150 kg.
1. Using only the information above, can you calculate the solubility of X in water at 17 0C.
2. If you said yes, calculate it.
Answer:
No, you can not calculate the solubility of X in water at 17 0C.
Explanation:
Solubility refers to the amount of a substance that dissolves in 1000 L of water.
To calculate the solubility of a solute in water, all the water is evaporated and the solid is carefully collected, washed, dried and weighed. The mass of solid obtained can now be used to calculate the solubility of the solute in water as long as there was no loss in mass of solid during the experiment.
In this case, the student threw away part of the solid that precipitated. As a result of this, the mass of solid obtained at the end of the experiment is not exactly the total mass of solute that dissolved in the solvent. Hence, the solubility of X in water at 17 0C can not be accurately calculated.
I have calculated 23 grams of water in a laboratory. What is the amount of molecules
present in this amount?
a. None of the above
b. 8.3x10^24 molecules
c. 6.9x10^23 molecules
d. 7.7x10^23 molecules
e. 5.6x10^25 molecules
Answer:
d. 7.7x10^23 molecules
Explanation:
Given the following data:
Mass of water (H2O) = 23g
To find the number of molecules;
First of all, we would determine the number of moles;
[tex] Number \; of \; moles = \frac {mass}{molar mass} [/tex]
Molar mass of water (H2O) = (1 * 2) + 16 = 18 g/mol
Substituting into the equation, we have
[tex] Number \; of \; moles = \frac {23}{18} [/tex]
Number of moles = 1.2778 moles
Now, to find the number of water molecules;
We know that Avogadro constant is equal to 6.02 * 10^23 mol¯¹
Number of water molecules = number of H2O moles * Avogadro constant
Substituting into the equation, we have;
Number of water molecules = 1.2778 × 6.02 * 10^23
Number of water molecules = 7.7 × 10^23 atoms.
A sample of acid rain turned
universal indicator yellow. What would you expect its pH to be? Is it a strong or a weak acid?
Answer:
i think it would be 3 or lower
Answer:
A universal indicator shows a greenish-yellow colour for pH 6 and orange yellow for pH 5. This means that if the indicator turns yellow, the pH should be between these two values. Hence, it must have a pH value between 5 and 6. As the pH is closer to 7 (between 5 and 6), it is a weak acid.Explanation:
Trust the correct answer
Tengo que resolver con procedimiento
1. Un automóvil viaja a una velocidad de 100 Km/h durante dos horas. Calcular la distancia recorrida.
2. Un automóvil viaja a una velocidad de 68 Km/h durante tres horas. Calcular la distancia recorrida.
3. Un auto recorre 154 Km en dos horas. ¿Cuál fue su velocidad?
4. Un auto recorre 1500 Km, si lo hace a una velocidad de 70 Km/h, ¿cuánto tardo en hacerlo?.
Answer:
Distance = 200 km
Distance = 204 km
Speed = 77 km/h
Time = 21.42 h
Explanation:
Given:
A.
Speed = 100 km/h , Time = 2 h
Find:
Distance
B.
Speed = 68 km/h , Time = 3 h
Find:
Distance
C.
Distance = 154 km , Time = 2 h
Find:
Speed
D.
Distance = 1500 km speed = 70 km/h
Find:
Time
Computation:
Speed = distance / time
A.
Distance = 100 x 2
Distance = 200 km
B.
Distance = 68 x 3
Distance = 204 km
C.
Speed = 154 / 2
Speed = 77 km/h
D.
Time = 1500 / 70
Time = 21.42 h
Solid nickel is added to aqueous iron nitrate. Using the metal activity series, which chemical equation reflects this reaction and its outcome? Question 5 options: A) 3Ni(NO3)2 (aq) + 2Fe (s) → NR B) Ni (s) + Fe(NO3)3 (aq) → NR C) 3Ni(NO3)2 (aq) + 2Fe (s) → 3Ni (s) + 2Fe(NO3)3 (aq) D) 3Ni (s) + 2Fe(NO3)3 (aq) → 3Ni(NO3)2 (aq) + 2Fe (s)
Answer:
3 Ni + Fe(NO₃)₃ --> 3 Ni(NO₃) + Fe
Explanation:
In this question, the reactants are;
Solid Nickel and Iron nitrate. This is represented as;
Ni and Fe(NO3)3
The equation of the reaction is given as;
3 Ni + Fe(NO₃)₃ --> 3 Ni(NO₃) + Fe
The option that closely matches this is;
Option D. (Although the reaction is not balanced)
Consider the reaction 2Al + 6HBr → 2AlBr3 + 3H2. If 12 moles of Al react with 12 moles of HBr, what is the limiting reactant?
Answer:
the limiting reactant is HBr
Explanation:
if you tried to make the products using 12 mol Al and 12 mol HBr, the HBr will run out first
Detection of iron ions Fe+3 and Fet+2
Answer:
The diffrence between Fe2+ and Fe3+ is the Fe2+has a pale green color and turns violet when water is added to it. While Fe3+ forms blood red when it reacts with thiocyanate ions.
Fe2+ has paramagnetic properties whereas
Fe3+ has diamagnetic properties.
Explanation:
I may not be correct.
Answer:
ok ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
In determining the energy of activation, why was it prudent to run the slowest trial done at room temperature in the hot water bath and the fastest trial done at room temperature in the cold water bath?
Answer:In determining the energy of activation, why was it prudent to run the slowest trial done at room temperature in the hot water bath and the fastest trial done at room temperature in the cold water bath?
Explanation:
Indicate whether each structure is aromatic, nonaromatic, or antiaromatic. Assume planarity. Compound A is a 5 membered heterocyclic ring containing two pi bonds. On one of the pi bonds is a sulfur with one lone pair and a positive charge. There is an N H group between the two pi bonds with one lone pair. Compound B is a 6 membered ring with three pi bonds. One of the ring atoms is a protonated oxygen with one lone pair. Compound C is an 8 membered ring with a double bond between carbons 2 and 3, between carbons 5 and 6 and between carbons 7 and 8. There is a positive charge on carbon 4 and a negative charge and lone pair on carbon 1. Compound D is a 7 membered ring with three pi bonds. In between two alkenes is a boron attached to a hydrogen. Comppound E is a 7 membered ring with three pi bonds. In between two alkenes is a negative charge with a lone pair.
Answer:
this some next level stuff homie
Explanation:
imma just guess 7?
The thing being described is shaped like a ring with five parts. Inside the ring, there are two special types of bonds. This has a sulfur that is positively charged and has one unshared pair, also it has an NH group with one unshared pair.
What is the structureCompound B is a substance that is made up of two or more different elements or molecules.
The thing being described has a ring with six members and three pi bonds. It has an oxygen atom with an extra proton and one extra electron. This substance is not aromatic.
Read more about aromatic here:
https://brainly.com/question/30624539
#SPJ6
& Oregonians eat about 9503 metric tons of food each day. What is this consumption rate in grams
per second?
Answer:
109988 grams per second
Explanation:
To solve this problem first we convert 9503 metric tons into grams, keeping in mind that:
1 metric ton = 1000 kg1 kg = 1000 gMeaning that:
9503 metric ton * [tex]\frac{1000kg}{1metricTon}*\frac{1000g}{1kg}[/tex] = 9503x10⁶ gThen we calculate how many seconds are there in one day:
1 day * [tex]\frac{24h}{1day} *\frac{60min}{1h} * \frac{60s}{1min}[/tex] = 86400 sFinally we calculate the consumption rate:
9503x10⁶ g / 86400 s = 109988 g/slooking at the pure subtances :water,oxygen,copper, can you tell by looking at them if it is pure or not ? explain your answer using example...
Answer:
Yes water is a pure, Water, H2O, is a pure substance, a compound made of hydrogen and oxygen. Although water is the most abundant substance on earth, it is rarely found naturally in its pure form. Most of the time, pure water has to be created. Pure water is called distilled water or deionized water.
Oxygen is a chemical element – a substance that contains only one type of atom. Its official chemical symbol is O, and its atomic number is 8, which means that an oxygen atom has eight protons in its nucleus. Oxygen is a gas at room temperature and has no colour, smell or taste
Usually by pure substances we mean either pure elements (all one type of atom), regular crystals (atoms arranged in a repeating pattern), or things made of only one type of molecule (a tightly bound structure of one or more types of atoms). So copper is a pure substance in any form (only copper atoms).
Excess silver(I) nitrate was added to a 8.500 g mixture containing some amount of barium chloride, and 7.123 g of silver chloride was obtained. The unbalanced equation is
AgNO3 + BaCl2(aq) --> Ba(NO3)2(aq) + AgCl(s).
What is the mass% of BaCl2 in the mixture?
Answer:
60.88%
Explanation:
The balanced equation of the reaction is given as;
2 AgNO3 (aq) + BaCl2 (aq) → 2 AgCl (s) + Ba(NO3)2 (aq)
Since AgNO3 is in excess, the limiting reactant is BaCl2. From the reaction;
1 mol of BaCl2 produces 2 mol of AgCl
Converting to masses;
Mass = Number of mol * Molar mass
BaCl2;
Mass = 1 * 208.23 g/mol = 208.23 g
AgCl;
Mass = 2 * 143.32 g/mol = 286.64 g
208.23 g BaCl2 produces 286.64 g of AgCl
x g BaCl2 produces 7.123 g of AgCl
Solving for x;
x = 7.123 * 208.23 / 286.64 = 5.1745 g
Mass percent = Mass / Total mass of Mixture * 100
Mass Percent = 5.1745 / 8.500 = 0.6088 * 100 = 60.88%
What is the molar mass of Ammonium Carbonate?
Explanation:
Molar mass
96.09 g/mol
glad to help....
MnO4 - is a stronger oxidizing agent than ReO4 - . Both ions have charge-transfer (LMCT) bands; however, the charge-transfer band for ReO4 - is in the ultraviolet, whereas the corresponding band for MnO4 - is responsible for its intensely purple color. Are the relative positions of the charge-transfer absorptions consistent with the oxidizing abilities of these ions? Explain
Answer:
[tex]$MnO^-_4$[/tex] is a strong oxidizing agent.
Explanation:
The 5d orbitals of Re are higher in energy than 3 d orbitals of Mn. So an LMCT ligand to metal charge transfer excitation requires more energy of [tex]$ReO^-_4$[/tex].
Also, since the molecular orbitals are derived primarily from 3d orbitals of [tex]$MnO^-_4$[/tex] are lower in energy than the corresponding MO's of [tex]$ReO^-_4$[/tex], [tex]$MnO^-_4$[/tex] is better able to accept the electrons.
So it is a better oxidizing agent.
The ligand to metal charge transfer band in ReO4- occurs in the near UV region hence ReO4 - appears colorless.
The electron configuration of Re is Xe 4f14 5d5 6s2 and the electron configuration of Mn is [Ar] 3d5 4s2. We can see that Mn^7+ and Re^7+ have empty d orbitals.
The color of MnO4 - must result from ligand to metal charge transfer hence the purple color of MnO4 -. In the case of ReO4 -, the ligand to metal charge transfer occurs at a much higher energy owing to the fact that 5d orbitals are involved. This transition occurs in the near UV region hence ReO4 - appears colorless. The ligand to metal charge transfer in MnO4- involves lower energy 3d orbitals hence it occurs in the visible region of the spectrum.
Learn more: https://brainly.com/question/8646601
In the laboratory, a general chemistry student measured the pH of a 0.328 M aqueous solution of acetylsalicylic acid (aspirin), HC9H7O4 to be 1.987. Use the information she obtained to determine the Ka for this acid.
Answer: [tex]K_a[/tex] for the acid is [tex]3.34\times 10^{-4}[/tex]
Explanation:
[tex]HC_9H_7O_4\rightarrow H^+C_9H_7O_4^-[/tex]
cM 0 0
[tex]c-c\alpha[/tex] [tex]c\alpha[/tex] [tex]c\alpha[/tex]
Give c = 0.328 M and [tex]pH=1.987[/tex]
[tex]1.987=-log[H^+][/tex]
[tex][H^+]=0.0103[/tex]
[tex][H^+]=c\times \alpha[/tex]
[tex]0.0103=0.328\times \alpha[/tex]
[tex]\alpha=0.0314[/tex]
So dissociation constant will be:
[tex]K_a=\frac{(c\alpha)^{2}}{c-c\alpha}[/tex]
Putting in the values we get:
[tex]K_a=\frac{(0.328\times 0.0314)^2}{(0.328-0.328\times 0.0314)}[/tex]
[tex]K_a=3.34\times 10^{-4}[/tex]
