Answer:
heights of sea level and the space between gas molecules.
Explanation:
Asking that Which factor increases as a result of increasing altitude?
As the height above the sea increases, air density decreases because the molecule of the air will spread out causing air density to decrease. Also, there will be less air pressing down which will lead to a decrease in air pressure.
Therefore, the heights of sea level, and space between gas molecules are the factor that will increase as a result of increasing altitude. Not Air pressure and air density. But the heights of sea level and the space between gas molecules.
Answer:
AnswerAnswer c
Explanation:
Question 1 of 15
All digits shown on the measuring device, plus one estimated digit, are
considered
Answer here
SUBMIT
Answer:
significant
Explanation:
The digits in a measurement that are considered significant are all of those digits that represent marked calibrations on the measuring device plus one additional digit to represent the estimated digit (tenths of the smallest calibration).
A microwave oven operates at 2.50 GHzGHz . What is the wavelength of the radiation produced by this appliance? Express the wavelength numerically in nanometers.
Answer:
The wavelength is [tex]\lambda = 1.2 * 10^8 nm[/tex]
Explanation:
From the question we are told that
The frequency of operation of the microwave is [tex]f = 2.50 GHz = 2.50 *10^{9} \ Hz[/tex]
Generally the wavelength is mathematically represented as
[tex]\lambda = \frac{c}{f}[/tex]
Here c is the speed of light with value [tex]c = 3.0 *10^{8} \ m/s[/tex]
So
[tex]\lambda = \frac{3.0 *10^{8}}{ 2.50 *10^{9}}[/tex]
=> [tex]\lambda = 0.12 \ m [/tex]
converting to nanometer
[tex]\lambda = 1.2 * 10^8 nm[/tex]
is this correct?? or wrong?
When driving at slower speeds you need to use what type of steering
wheel movements compared to when driving at faster speeds? *
Answer:
slower speeds = larger and faster steering wheel movements
faster speeds = small and slow steering wheel movements
Explanation:
When driving at slower speeds you need to use larger and faster steering wheel movements. This is because at slow speeds the car does not have enough momentum to make certain maneuvers with small steering wheel movements in a given amount of time, therefore making large and faster steering wheel movements gives the car enough time with the momentum it has to make the desired maneuver. At faster speeds only small and slow steering wheel movements are needed and while cause the car to quickly change to the desired direction due to the increased momentum of the car.
Matter is anything that takes up space and has mass. O A. True O B. False
Answer:True
Explanation:Matter is everything around you. Atoms and compounds are all made of very small parts of matter. Those atoms go on to build the things you see and touch every day. Matter is defined as anything that has mass and takes up space (it has volume).
Which state of matter is most similar to solids
Answer:
liquids
Explanation
You are driving your car at 45 m/s, when a raccoon runs into the street in front of you. You slam on the brakes and come to a stop in 5 seconds. What is the acceleration of your car?
Answer:
-9m/s²
Explanation:
Given parameters:
Initial velocity = 45m/s
Final velocity = 0
duration = 5s
Unknown:
acceleration = ?
Solution:
Acceleration is the rate of change of velocity with time;
Acceleration = [tex]\frac{v- u}{t}[/tex]
v is the final velocity
u is the initial velocity
t is the time taken
Input the parameters and solve;
Acceleration = [tex]\frac{0 - 45}{5}[/tex] = -9m/s²
The car accelerates at a rate of -9m/s² which is a deceleration
What is the effect of applying an unbalanced force on an object?
A. Object moves
B. Object remains stationary
C. Mass of object increases
D. Inertia of object increases
Object will start moving in the direction where comparatively high force is directing to move
What is an unbalance force ?When the resultant force acting on a body is not equal to zero , the force acting on the body are known as unbalance forces . The body acted upon by unbalance forces changes its state of motion.
According to Newton if a body is experiencing net force =0 (which means that all horizontal and vertical forces are cancelling each other ), then the body will acquire an equilibrium state and will not move because forces are balancing each other and making net force on the body zero .
But unbalance force can tend the body to move in that direction in which a comparatively high force is acting due to which cancellation will not occur ( equilibrium state will not occur )
hence correct option A)Object moves
learn more about unbalance forces
https://brainly.com/question/13259103?referrer=searchResults
#SPJ3
Average velocity of Mike Phelps swimming 100 m race in the 50 m long pool (2 laps) is approximately equal to *
A. 0 m/s
B. 1 m/s
C. 2 m/s
D. 4 m/s
Answer:
2
Explanation:
KINEMATICS: MOTION ALONG STRAIGHT LINE
The nearest grocery is 60m, east from your house. You are walking at 1.2 m's for 15.Os toward
the grocery when it started to rain and you ran back to your house to get an umbrella. It took
you another 5.0s to go back to your house. You start walking again at 1.2m's until you reach
the grocery. (a) What is your average speed? (b) What is your average velocity?
Explanation:
hope this helps, cheers!
The values for the average speed and average velocity are;
(a) [tex]Average \ speed = 1.37\overline{142857} \ m/s[/tex]
(b) [tex]The \ average \ velocity = 0.\overline{857142} \ m/s[/tex]
The reason the above values are correct is given as follows;
The given parameters are;
Distance of the nearest grocery store to the house, d = 60 m
Direction of the grocery store = East from the house
Walking speed, s = 1.2 m/s
Time of walking before the rain started, t₁ = 15.0 s
Time it takes to go back to the house, t₂ = 5.0 s
Speed at which the start walking again, s = 1.2 m/s
(a) The formula for average speed, [tex]s_{avg}[/tex], is given as follows;
[tex]s_{avg} = \dfrac{Total \ distance }{Sum \ of \ time \ taken}[/tex]
The distance walked before the rain, d₁ = 1.2 m/s × 15.0 s = 18 meters
Distance covered on returning to the house = d₂ = d₁ = 18 meters
The total distance covered, ∑Distance = d₁ + d₂ + 60
∴ ∑Distance = 18 m + 18 m + 60 m = 96 m
The time, t₃, it takes to get to the grocery store on the second attempt after getting the umbrella is given as follows;
[tex]t_3 = \dfrac{d}{v}[/tex]
[tex]t_3 = \dfrac{60 \ m}{1.2 \ m/s} = 50.0 \, s[/tex]
The total time, ∑Time = t₁ + t₂ + t₃
∴ ∑Time = 15.0 s + 5.0 s + 50.0 s = 70.0 s
[tex]Average \ speed = \dfrac{\sum Distance}{\sum Time}[/tex]
[tex]Average \ speed = \dfrac{96 \, m}{70 \, s} = \dfrac{48}{35} \ m/s= 1.37\overline{142857} \ m/s[/tex]
[tex]Average \ speed = 1.37\overline{142857} \ m/s[/tex]
(b) The average velocity, [tex]v_{avg}[/tex], is given as follows;
[tex]v_{avg}= \dfrac{Total \ displacement}{Total \ time}[/tex]
The total displacement = The total change in location = The change in location from the house to the grocery = 60 m
The total time is the same as for the average speed, ∑Time = 70 s
[tex]\therefore v_{avg}= \dfrac{60 \, m}{70 \, s} = \dfrac{6}{7} \ m/s = 0.\overline{857142} \ m/s[/tex]
[tex]The \ average \ velocity = 0.\overline{857142} \ m/s[/tex]
Learn more about average speed and average velocity here:
https://brainly.com/question/589950
https://brainly.com/question/20498289
https://brainly.com/question/12984400
While making some observations at the top of the 66 m tall Astronomy tower, Ron
accidently knocks a 0.5 kg stone over the edge. How long will a student at the bottom
have to get out of the way before being hit?
Analysing the question:
Since the stone was dropped, there was no initial velocity applied on it and hence it's initial velocity of the stone is 0 m/s
We are given:
height of the tower (h) = 66 m
mass of the stone (m) = 0.5 kg
initial velocity of the stone (u) = 0 m/s
time taken by the stone to reach the ground (t) = t seconds
acceleration due to gravity = 10 m/s²
** Neglecting air resistance**
Finding the time taken by the stone to reach the ground:
from the second equation of motion
h = ut + 1/2at²
replacing the variables
66 = (0)(t) + 1/2 (10)(t)²
66 = 5t²
t² = 13.2
t = 3.6 seconds
I initially wanted to subtract the height of the student from the height of the tower since the time i calculated is the time taken by the stone to reach the ground and that means that the stone has already hit the student before 3.6 seconds
but since we were NOT given the height of a student, the person who posed this question wants the time taken by the stone to reach the ground and that is what we solved
The volume of 2.0 kg of helium in a piston-cylinder device is initially 7 m3. Now the helium is compressed to 5 m3 while its pressure is maintained constant at 160 kPa. Determine: (a) The initial and final temperatures of helium. (b) The work required to compress it, in kJ.
Answer:
A) T1 = 269.63 K
T2 = 192.59 K
B) W = -320 KJ
Explanation:
We are given;
Initial volume: V1 = 7 m³
Final Volume; V2 = 5 m³
Constant Pressure; P = 160 KPa
Mass; m = 2 kg
To find the initial and final temperatures, we will use the ideal gas formula;
T = PV/mR
Where R is gas constant of helium = R = 2.0769 kPa.m/kg
Thus;
Initial temperature; T1 = (160 × 7)/(2 × 2.0769) = 269.63 K
Final temperature; T2 = (160 × 5)/(2 × 2.0769) = 192.59 K
B) world one is given by the formula;
W = P(V2 - V1)
W = 160(5 - 7)
W = -320 KJ
1. Consider the point exactly halfway between the two wires. Can you adjust the current so that, with current passing through each of the wires, the net field is zero here? 2. Note the distance between the field lines from one of the wires. Are they equally space? Explain. 3. With currents of different magnitudes passing through the two wires, how do the forces on the two wires compare? What is the reason for this?
Answer:
hello your question is incomplete attached below is missing part of the question
answer:
1 ) Magnetic field due to long current carrying wire : [tex]B = \frac{U_{0} I}{2\pi d}[/tex]
Therefore the net magnetic field due the both wires ; B = B[tex]_{1}[/tex] + B[tex]_{2}[/tex] . when we adjust the current I[tex]_{1}[/tex] = I[tex]_{2}[/tex] then the Netfield (B ) = zero
2) The distance between the field lines are not equally spaced and this is because the separation between field lines increases with the increase in the distance between the wires
3) Increase in current through the wire will lead to increase in force and this can be explained via this equation
[tex]F = \frac{U_{0}I_{1}I_{2} }{2\pi d }[/tex]
Explanation:
1 ) Magnetic field due to long current carrying wire : [tex]B = \frac{U_{0} I}{2\pi d}[/tex]
Therefore the net magnetic field due the both wires ; B = B[tex]_{1}[/tex] + B[tex]_{2}[/tex] . when we adjust the current I[tex]_{1}[/tex] = I[tex]_{2}[/tex] then the Netfield (B ) = zero
2) The distance between the field lines are not equally spaced and this is because the separation between field lines increases with the increase in the distance between the wires
3) Increase in current through the wire will lead to increase in force and this can be explained via this equation
[tex]F = \frac{U_{0}I_{1}I_{2} }{2\pi d }[/tex]
Regardless of what state a substance is in, it is always that substance
True
False
A block initially at rest is allowed to slide down a frictionless ramp and attains a speed v at the bottom. To achieve a speed 2v at the bottom, how many times as high must a new ramp be?
Answer:
new height of ramp must be 4 times that of the first ramp.
Explanation:
From conservation of energy, we know that;
Potential energy at the top of ramp = kinetic energy at the bottom of ramp.
Thus;
mgh_t = ½mv²
m will cancel out to give;
gh_t = ½v²
Thus means that the height of the first ramp is directly proportional to the square of the speed.
Thus;
h_t ∝ v²
Now, for the new ramp, we are told that we want to achieve a speed of 2v at the bottom.
Thus;
h'_t ∝ (2v)²
h'_t ∝ 4v²
From earlier we saw that;
h_t ∝ v²
Thus;
New height of ramp is;
h'_t ∝ 4h_t
Thus, new height of ramp must be 4 times that of the first ramp.
To increase the speed to 2v at the bottom of the ramp, the height will be 4 times higher.
The given parameters;
velocity at the bottom ramp, = vlet the height of the ramp = hApply the principle of conservation of energy;
P.E = K.E
[tex]mgh = \frac{1}{2} mv^2\\\\gh = \frac{1}{2} v^2\\\\h = \frac{v^2}{2g}[/tex]
To increase the speed 2v at the bottom of the ramp, the height will be;
[tex]H = \frac{(2v)^2}{2g} \\\\H = \frac{4v^2}{2g} \\\\H = 4(\frac{v^2}{2g} )\\\\H = 4(h)[/tex]
Thus, to increase the speed to 2v at the bottom of the ramp, the height will be 4 times higher.
Learn more here:https://brainly.com/question/20626677
A 7.0 µF capacitor and a 5.0 µF capacitor are connected in series across a 5.0 kV potential difference. The charged capacitors are then disconnected from the source and connected to each other with terminals of like sign together. Find the charge on each capacitor (in mC) and the voltage across each capacitor (in V). (Due to the nature of this problem, do not use rounded intermediate values in your calculations—including answers submitted in WebAssign.)
Explanation:
Given two capacitors 7.0 µF and 5.0 µF connected in series, let s calculate the effective capacitance.
[tex]\frac{1}{C_T} = \frac{1}{7.0} +\frac{1}{5.0}\\ \frac{1}{C_T} = \frac{5+7}{35} \\C_T = \frac{35}{12}\\ C_T = 2.9166\mu F[/tex]
Given
V = 5.0kV = 5000Volts
To get the total charge in the circuit, we will use the formula:
[tex]Q = C_TV\\Q = 2.9166\times 10^{-6} \times 5000\\Q = 0.014583 C\\Q = 1.4583 \times 10^{-2}C[/tex]
Since the same charge flows in a series connected capacitors, the charge on them in mC is 14.583mC
For the voltage across 7.0 µF:
[tex]V = \frac{Q}{C}\\V = \frac{0.014583}{0.000007} \\V = 2,083.28V[/tex]
Voltage across the 7.0 µF is 2,083.28V
The voltage across the 5.0 µF:
V = 5000 - 2,083.28
V = 2,916.72Volts
Voltage across the 5.0 µF is 2,916.72V
Answer:
The charge on the first capacitor is 14.59 mC
The voltage across the first capacitor is 2084 V
The charge on the second capacitor is 14.59 mC
The voltage across the second capacitor is 2918 V
Explanation:
Given;
first capacitor, C₁ = 7.0 µF
second capacitor, C₂ = 5.0 µF
potential difference, V = 5000 V
The equivalent capacitance is given by;
[tex]\frac{1}{C_{eq}}= \frac{1}{C_1} +\frac{1}{C_2}\\\\\frac{1}{C_{eq}}= \frac{C_1 + C_2}{C_1C_2}\\\\C_{eq} = \frac{C_1C_2}{C_1 +C_2}\\\\ C_{eq} = \frac{(7*10^{-6})(5*10^{-6})}{(7*10^{-6} \ +\ 5*10^{-6})}\\\\C_{eq} = 2.917*10^{-6} \ F[/tex]
The charge on the first capacitor is given by;
[tex]Q_1 = C_{eq} V\\\\Q_1 = 2.917*10^{-6} *5000\\\\Q_1 = 0.01459 \ C\\\\Q_1 = 14.59 \ mC[/tex]
The voltage across the first capacitor is given by;
[tex]V_1 = \frac{Q_1}{C_1} \\\\V_1 = \frac{0.01459}{7*10^{-6}}\\\\ V_1 = 2084.286 \ V[/tex]
V₁ = 2084 V
The charge on the second capacitor is given by;
[tex]Q_2 = C_{eq} V\\\\Q_2 = 2.917*10^{-6} *5000\\\\Q_2 = 0.01459 \ C\\\\Q_2 = 14.59 \ mC[/tex]
The voltage across the second capacitor is given by;
[tex]V_2 = \frac{Q_2}{C_2}\\\\ V_2 = \frac{0.01459}{5*10^{-6}}\\\\V_2 = 2918 \ V[/tex]
Protons and neutrons grouped in a specific pattern
Ob
Protons and electrons spread around randomly
Ос
А group of protons and neutrons that are surrounded by electrons
Od
A ball of electrons and neutrons surrounded by protons
A Navy Seal of mass 80 kg parachuted directly down into an enemy harbor. At one point while she was falling, the resistive force that air exerted on her was 520 N upward. What can you determine about her motion at this point in time
Answer:
The Navy Seal is accelerating downwards at the rate of 3.3 m/s²
Explanation:
Given;
mass of the Navy Seal, m = 80 kg
the upward resistive force on her, F = 520 N
Her net downward force is given by;
[tex]F_{net} = F_{down} - F_{up}\\\\F_{net} = (80*9.8) - 520\\\\F_{net} = 264 \ N[/tex]
Her downward acceleration at this time is given by;
F = ma
a = F / m
a = 264 / 80
a = 3.3 m/s²
Therefore, the Navy Seal is accelerating downwards at the rate of 3.3 m/s²
The average speed of an object, S SS, is calculated using the formula S = D T S= T D S, equals, start fraction, D, divided by, T, end fraction, where T TT is the time it takes to travel a distance of D DD units. Rearrange the formula to solve for time ( T ) (T)
Answer:
T = D/S
Explanation:
Given the formula for calculating the average speed of an object as:
average speed = Distance/Time
Let average speed = S
Distance = D
Time = T
Substitute
S = D/T
Make T the subject of the formula:
From S = D/T
Cross multiply
ST = D
Divide both sides by S
ST/S = D/S
T = D/S
Hence the expression for he time T after rearrangement is T = D/S
What is the maximum speed with which a 1200-kg car can round a turn of radius 92.0 m on a flat road if the coefficient of static friction between tires and road is 0.65
Answer:
24.22m/sExplanation:
Given data
mass m= 1200kg
radius r=92m
coefficient of friction μ=0.65
We know that
F=mv2/r
F=μmg
mv2/r = μsmg
v^2/r = μsg
vmax = √(rμg)
Substituting our data we have
vmax=√(92*0.65*9.81)
vmax=√586.638
vmax=24.22m/s
In a railroad switchyard, a rail car of mass 41,700 kg starts from rest and rolls down a 2.65-m-high incline and onto a level stretch of track. It then hits a spring bumper, whose spring compresses 79.4 cm. Find the spring constant.
Answer:
The spring constant is 3.44x10⁶ kg/s².
Explanation:
We cand find the spring constant by conservation of energy:
[tex] E_{i} = E_{f} [/tex]
[tex] mgh = \frac{1}{2}kx^{2} [/tex] (1)
Where:
m is the mass = 41700 kg
g is the gravity = 9.81 m/s²
h is the height = 2.65 m
x is the distance of spring compression = 79.4 cm
k is the spring constant =?
Solving equation (1) for k:
[tex]k = \frac{2mgh}{x^{2}} = \frac{2*41700 kg*9.81 m/s^{2}*2.65 m}{(0.794 m)^{2}} = 3.44 \cdot 10^{6} kg/s^{2}[/tex]
Therefore, the spring constant is 3.44x10⁶ kg/s².
I hope it helps you!
What is a personified statement?
Answer:
A statement about you
Explanation:
Answer:
Personification is when you give an animal or object qualities or abilities that only a human can have. This creative literary tool adds interest and fun to poems or stories. Personification is what writers use to bring non-human things to life. It helps us better understand the writer's message.
Explanation:
Consider the force field and circle defined below. F(x, y) = x2 i + xy j x2 + y2 = 121 (a) Find the work done by the force field on a particle that moves once around the circle oriented in the clockwise direction.
Answer: the work done by the force is 0
Explanation:
F (x², xy)
121 = 11²
so R = x² + y² = 11²
p = x². Q = xy
Δp/Δy = 0, ΔQ/Δx
using Green's theorem
woek = c_∫F.Δr = R_∫∫ ΔQ/Δx - Δp/Δy) ΔA
= (x² + y² = 121)_∫∫ yΔA
now let x = rcosФ, y = rsinФ
ΔA = rΔrΔФ
so r from 0 to 11
and Ф from 0 to 2π
= 0_∫^2π 0_∫^11 rsinФ × rΔrΔФ
= 0_∫^2π SinФΔФ 0_∫^11 r²Δr
= [ -cosФ]^2π_0 [r³/3]₀¹¹ = ( -cos2π + cos0) (11³/3) = 0
therefore the work done by the force is 0
find the vector sum of the 3 vectors. A= -3i - 2j + 7k, B= i + 3j + 3k, B= -5k
Answer:
34k+B plus 9 :)
Explanation:
A projectile is fired straight up with an initial velocity of 40.0 m/s . Approximately how high will the projectile ?
Answer:
it depends on the wind and any other conditions but if you have a controlled environment it should take 1 second to get 40 meters but it could go higher in which it could take about 5 seconds to go 200 meters
Explanation:
hope it helped
:)
When a parachute opens, the air exerts a large drag force on it. This upward force is initially greater than the weight of the sky diver and, thus, slows him down. Suppose the weight of the sky diver is 915 N and the drag force has a magnitude of 1061 N. The mass of the sky diver is 93.4 kg. Take upward to be the positive direction. What is his acceleration, including sign
Explanation:
According to newton's second law of motion.
[tex]\sum Fx = ma\\\\\sum Fx = 1061 - 915\\\\\sum Fx = 146N[/tex]
m is the mas of the sky diver = 93.4kg
a is the acceleration of the skydiver
From the formula above;
[tex]a = \frac{\sum Fx}{m}\\ \\a = \frac{146}{93.4}\\\\a = 1.563m/s^2[/tex]
Hence the acceleration of the sky diver is 1.563m/s²
A 0.5 kg basketball moving 5 m/s to the right collides with a 0.05 kg tennis
ball moving 30 m/s to the left. After the collision, the tennis ball is moving 34
m/s to the right. What is the velocity of the basketball after the collision?
Assume an elastic collision occurred.
A. 1.4 m/s to the left
B. 1.4 m/s to the right
C. 11.4 m/s to the right
D. 11.4 m/s to the left
SOMEBODY HELP ME
Answer:
A. 1.4 m/s to the left
Explanation:
To solve this problem we must use the principle of conservation of momentum. Let's define the velocity signs according to the direction, if the velocity is to the right, a positive sign will be introduced into the equation, if the velocity is to the left, a negative sign will be introduced into the equation. Two moments will be analyzed in this equation. The moment before the collision and the moment after the collision. The moment before the collision is taken to the left of the equation and the moment after the collision to the right, so we have:
[tex]M_{before} = M_{after}[/tex]
where:
M = momentum [kg*m/s]
M = m*v
where:
m = mass [kg]
v = velocity [m/s]
[tex](m_{1} *v_{1} )-(m_{2} *v_{2})=(m_{1} *v_{3} )+(m_{2} *v_{4})[/tex]
where:
m1 = mass of the basketball = 0.5 [kg]
v1 = velocity of the basketball before the collision = 5 [m/s]
m2 = mass of the tennis ball = 0.05 [kg]
v2 = velocity of the tennis ball before the collision = - 30 [m/s]
v3 = velocity of the basketball after the collision [m/s]
v4 = velocity of the tennis ball after the collision = 34 [m/s]
Now replacing and solving:
(0.5*5) - (0.05*30) = (0.5*v3) + (0.05*34)
1 - (0.05*34) = 0.5*v3
- 0.7 = 0.5*v
v = - 1.4 [m/s]
The negative sign means that the movement is towards left
Answer:
A. 1.4 m/s to the left
Explanation:
If we throw a body upwards at time t=0 with an initial speed s=25 m/s, what would the body's speed, position and velocity?
Answer:
The speed is v = 25 - 9.8 t
the velocity is v = (25 - 9.8 t) j^
the position is y = 25 t - 4.9 t²
Explanation:
This is a vertical throwing exercise.
The first thing we must do is set a coordinate system, in this case we will make the upward direction positive.
Let's write the kinematics equations
v = v₀ - g t
v² = v₀² - g (y-y₀)
y = y₀ + v₀ t - ½ g t²
in our case the initial velocity is
v₀ = 25 m / s
and we zero the system at the launch point
y₀ = 0
the equations remain
v = 25 - 9.8 t
v² = 25² - 9.8 y
y = 0 + 25 t - ½ 9.8 t²
The speed is v = 25 - 9.8 t
the velocity is v = (25 - 9.8 t) j^
the position is y = 25 t - 4.9 t²
41
Adam is pushing his box of baseball
equipment with a force of 10 N and
the box is pushing back towards
Adam with a force of 6 N. What is the
total net force? What will happen to the motion of
the box? Explain.
The Magnolia loh
deneaker notes
Answer:
16
Explanation:
6+10=16
the box will go forward but it will be a little harder.
I NEED HELP PLEASEE ITS AN ECONOMICS QUESTION ABOVE
Answer:
I believe the answer is Property taxes
Explanation:
Answer: I'm pretty sure property taxes
Explanation:
