When 4 g of a metal carbonate MCO, was dissolved in 160 cm of 1 M hydrochloric acid and then the resultant solution diluted to one litre, 25. 0 cm of this solution required 20. 0 cm' of 0. IM sodium hydroxide solutidn for complete neutralisation, calculate:
(i) The number of moles per litre of excess hydrochloric acid that reacted with sodium hydroxide, NaOH.

(ii) The number of moles per litre of acid that reacted with the carbonate.

(iii) The number of moles of carbonate, MCO, that reacted with the acid.

(iv) The formula mass of the carbonate, MCO, (v) The atomic mass of the metal M. (C = 12. 0. 0 = 16. 0)​

Answers

Answer 1

(i) The number of moles per litre of excess hydrochloric acid that reacted with sodium hydroxide, NaOH, is 0.2.

(ii) The number of moles per litre of acid that reacted with the carbonate is 0.04.

(iii) The number of moles of carbonate, MCO, that reacted with the acid is 0.008.

(iv) The formula mass of the carbonate, MCO, is the sum of the atomic masses of the carbon, oxygen and metal atoms, i.e., MCO, M + 12 + 16 = M + 28.

(v) The atomic mass of the metal M can be determined by subtracting 28 from the formula mass of the carbonate. Thus, M = formula mass of MCO - 28.

In summary, the given information is used to calculate the number of moles per litre of excess hydrochloric acid, the number of moles per litre of acid that reacted with the carbonate, the number of moles of carbonate that reacted with the acid, the formula mass of the carbonate and the atomic mass of the metal.

Know more about  Hydrochloric acid here

https://brainly.com/question/15231576#

#SPJ11


Related Questions

The temperature of sulfur dioxide is changed, causing a change in volume from 20. 923 L to 29. 508 L. If the new temperature is 260. 93 K,


what was its original temperature?


Your answer must include the following:


• The name of the law that applies to this problem


• The equation that you are going to use expressed in variables


• The answer with correct units

Answers

The law that applies to this problem is Charles's Law.

The equation for Charles's Law is [tex]\frac{V_{1} }{T_{1} }[/tex] = [tex]\frac{V_{2} }{T_{2} }[/tex]

The original temperature of sulfur dioxide was 185.12 K.

The law that applies to this problem is Charles's Law, which states that at constant pressure, the volume of a fixed amount of gas is directly proportional to its temperature in kelvin.

The equation for Charles's Law is [tex]\frac{V_{1} }{T_{1} }[/tex] = [tex]\frac{V_{2} }{T_{2} }[/tex], where [tex]V_{1}[/tex] is the initial volume, [tex]T_{1}[/tex] is the initial temperature, [tex]V_{2}[/tex] is the final volume, and [tex]T_{2}[/tex] is the final temperature.

Using the given values, we can plug them into the equation and solve for the initial temperature:

[tex]\frac{V_{1} }{T_{1} }[/tex] = [tex]\frac{V_{2} }{T_{2} }[/tex]
20.923/[tex]T_{1}[/tex] = 29.508/260.93

Multiplying both sides by [tex]T_{1}[/tex] and dividing by 29.508, we get:

[tex]T_{1}[/tex] = (20.923/29.508) x 260.93 = 185.02 K

Therefore, the original temperature of sulfur dioxide was 185.12 K.

The answer with correct units is 185.12 K.

To know more about Charles's Law visit:

https://brainly.com/question/16927784

#SPJ11

One isotope of element J has an atomic mass of 78. 92u and a relative abundance of 50. 69%. The other major isotope of element J has an atomic mass of 80. 92u and a relative abundance of 49. 31%. Calculate the average atomic mass element J

Answers

The average atomic mass of element J is 79.854u as it determines the properties and behavior of the element in various chemical and physical processes.

To calculate the average atomic mass of element J, we need to use the formula:

Average atomic mass = (mass₁ × % abundance₁ + mass₂ x % abundance₂) ÷ 100

where mass₁ and mass₂ are the atomic masses of the two isotopes and % abundance₁ and % abundance₂ are their respective relative abundances.

Substituting the values given in the problem, we get:

Average atomic mass of J = (78.92u x 50.69% + 80.92u x 49.31%) ÷ 100

= (40.05148u + 39.80252u) ÷ 100

= 79.854u

To learn more about atomic follow the link:

brainly.com/question/5661976

#SPJ4

For #3 and #4, complete the synthesis reactions by writing the word equation for each
3. potassium + chlorine →
4. hydrogen + iodine →

Answers

potassium + chlorine → potassium chloride

hydrogen + iodine → hydrogen iodide

A synthesis reaction is a type of chemical reaction in which two or more simple substances combine to form a more complex product. In a synthesis reaction, the reactants come together to create a single compound, usually with the release of energy in the form of heat or light. The general equation for a synthesis reaction is A + B → AB, where A and B are the reactants, and AB is the product.

Synthesis reactions are also known as combination reactions because they involve the combination of two or more substances to form a new compound.

Learn more about synthesis reaction, here:

https://brainly.com/question/16987748

#SPJ1

Classify the following size particle: 4.2cm

I need an answer no explanation needed

Answers

Particle size is typically measured in units such as micrometers (µm) or nanometers (nm), which represent very small lengths on the order of thousandths or millionths of a meter, respectively.

What is the classification of the particle?

4.2 cm is much larger than the typical size of particles and is more in the range of everyday objects.

For example, 4.2 cm is roughly the size of a golf ball or a small tomato. If you have additional information about the particle's size, such as its shape or the material it is made of, I may be able to provide more specific guidance.

Also, a particle that is 4.2 nanometers (nm) in size falls in the range of nanoscale particles, which are typically much smaller than everyday objects and are invisible to the nakεd eye.

The size of the particle can provide some clues about its potential identity or classification, but additional information about its properties, composition, and context is needed to determine its specific identity.

Learn more about particle size here: https://brainly.com/question/29097852

#SPJ1

What mass in grams of hydrogen gas is produced if 20. 0 mol of zn are added to excess hydrochloric acid according to the equation




zn(s) +2hcl(aq) --> zncl₂(aq) + h₂(g)?

Answers

First, we need to use stoichiometry to find out how many moles of hydrogen gas are produced. From the balanced chemical equation, we can see that for every 1 mole of zinc (Zn), 1 mole of hydrogen gas (H2) is produced. Therefore, if we have 20.0 mol of Zn, we will also produce 20.0 mol of H2.

Next, we can use the formula for the mass of a gas:

mass = molar mass x number of moles

The molar mass of hydrogen gas is approximately 2.02 g/mol. Therefore, the mass of 20.0 mol of hydrogen gas would be:

mass = 2.02 g/mol x 20.0 mol
mass = 40.4 g

So, 40.4 grams of hydrogen gas are produced when 20.0 mol of Zn are added to excess hydrochloric acid.

Learn more about Hydrogen Gas : https://brainly.com/question/19813237

#SPJ11

What is the standard free energy change, ∆gɵ, in kj, for the following reaction at 298k

Answers

The standard free energy change (∆G°) for the given reaction at 298K is -474.26 kJ/mol.

The given reaction is: [tex]2H_2(g) + O_2(g) - > 2H_2O(g)[/tex]

The standard free energy change (∆G°) for the given reaction can be calculated using the equation:

∆G° = Σ∆G°f(products) - Σ∆G°f(reactants)

Where ∆G°f is the standard free energy of formation for each compound in the reaction at standard conditions (298K and 1 atm pressure).

Using the standard free energy of formation values from tables, we get:

∆G° = 2(-237.13 kJ/mol) - [2(0 kJ/mol) + 1(0 kJ/mol)]

∆G° = -474.26 kJ/mol

The negative value indicates that the reaction is exergonic and spontaneous under standard conditions.

To know more about standard free energy, here

brainly.com/question/13625901

#SPJ4

--The complete Question is, What is the standard free energy change, ∆G°, in kJ, for the following reaction at 298K?

2H2(g) + O2(g) -> 2H2O(g) --

you are separating anthracene from benzoic acid via an extraction between ethyl acetate and a basic aqueous solution in a separatory funnel. how would you recover the benzoic acid? group of answer choices collect the top layer, dry with na2so4, filter to remove the na2so4, and evaporate the solvent. collect the bottom layer, dry with na2so4, filter to remove the na2so4, and evaporate the solvent. collect the top layer and add hcl to precitipate the compound. collect the bottom layer and add hcl to precipitate the compound. collect the top layer and add naoh to precipitate the compound. collect the bottom layer and add naoh to precipitate the compound.

Answers

To recover the benzoic acid, collect the bottom layer, dry it with [tex]Na_{2} SO_{4}[/tex], filter to remove [tex]Na_{2} SO_{4}[/tex], and evaporate the solvent. The option 4  is correct.

This is because benzoic acid is a carboxylic acid and will react with the basic aqueous solution to form a water-soluble carboxylate salt. As a result, benzoic acid will be in the aqueous layer, which is the bottom layer. Ethyl acetate is the organic solvent and will form the top layer. By collecting the bottom aqueous layer, we can isolate the benzoic acid. Drying the solution with [tex]Na_{2} SO_{4}[/tex] removes any remaining water, and evaporating the solvent leaves behind the solid benzoic acid. Option 4 is correct answer.

To know more about benzoic acid, here

brainly.com/question/24052816

#SPJ4

--The complete Question is, you are separating anthracene from benzoic acid via an extraction between ethyl acetate and a basic aqueous solution in a separatory funnel. how would you recover the benzoic acid? group of answer choices

1.  collect the top layer, dry with na2so4,

2. filter to remove the na2so4, and evaporate the solvent.

3. collect the bottom layer, dry with na2so4,

4.  collect the bottom layer and add hcl to precipitate the compound.

5. collect the top layer and add hcl to precitipate the compound.  --

PLEASE HELP. Complete the following table.


[H3O+] [OH−] pOH pH Acidic or Basic


1. 0×10−8 1. 0×10−6 6. 00 8. 00 basic


_____ _____ _____ 3. 05 _____


9. 7×10−9 _____ _____ _____ _____


_____ _____ _____ 13. 79 _____


_____ 9. 6×10−11 _____ _____ _____



Part A


Complete the first column of the table.



Part B


Complete the second column of the table.



Part C


Complete the third column of the table.



Part D


Complete the fourth column of the table.



Part E


Complete the fifth column of the table

Answers

The answer to the part A, B, C, D and E are as follows-

Part A: [tex][H3O+] [OH−] pOH[/tex] pH Acidic or Basic

1.0×10−8 1.0×10−6 6.00 8.00 basic

1.0×10−5 1.0×10−9 9.00 5.00 acidic

9.7×10−9 1.0×10−5 5.00 8.99 basic

[tex]1.0×10−14 1.0×10^14 14.00 0.00 neutral\\1.0×10^−3 1.04×10^−11 11.98 2.00 acidic[/tex]

Part B:

[tex][H3O+] [OH−] pOH[/tex] pH Acidic or Basic

1.0×10−8 1.0×10−6 6.00 8.00 basic

1.0×10−5 1.0×10−9 9.00 5.00 acidic

9.7×10−9 1.0×10−5 5.00 8.99 basic

[tex]1.0×10−14 1.0×10^14 14.00 0.00 neutral\\1.0×10^−3 1.04×10^−11 11.98 2.00 acidic[/tex]

Part C:

[tex][H3O+] [OH−] pOH[/tex]pH Acidic or Basic

1.0×10−8 1.0×10−6 6.00 8.00 basic

1.0×10−5 1.0×10−9 9.00 5.00 acidic

9.7×10−9 1.0×10−5 5.00 8.99 basic

[tex]1.0×10−14 1.0×10^14 14.00 0.00 neutral\\1.0×10^−3 1.04×10^−11 11.98 2.00 acidic[/tex]

Part D:

[tex][H3O+] [OH−] pOH[/tex]pH Acidic or Basic

1.0×10−8 1.0×10−6 6.00 8.00 basic

1.0×10−5 1.0×10−9 9.00 5.00 acidic

9.7×10−9 1.0×10−5 5.00 8.99 basic

[tex]1.0×10−14 1.0×10^14 14.00 0.00 neutral\\1.0×10^−3 1.04×10^−11 11.98 2.00 acidic[/tex]

Part E:

[tex][H3O+] [OH−] pOH[/tex]pH Acidic or Basic

1.0×10−8 1.0×10−6 6.00 8.00 basic

1.0×10−5 1.0×10−9 9.00 5.00 acidic

9.7×10−9 1.0×10−5 5.00 8.99 basic

[tex]1.0×10−14 1.0×10^14 14.00 0.00 neutral\\1.0×10^−3 1.04×10^−11 11.98 2.00 acidic[/tex]

To know more about acidic refer to-

https://brainly.com/question/14072179

#SPJ11

Please help ill give brainiest


red tape can be used to repair a broken taillight a car. In one or two sentences, explain how different colors of light are
transmitted, reflected, and absorbed by this kind of tape. (2 points)

Answers

Red tape can be used to repair a broken taillight on a car. Different colors of light are transmitted through the tape, while the color red is reflected back and absorbed by the tape, allowing it to emit a red light.

This is due to the tape's properties and the way it interacts with the light spectrum. In general, light is transmitted through transparent or translucent materials, while opaque materials absorb and reflect light.

The color of an object is determined by the wavelengths of light that are absorbed and reflected by its surface. So, in the case of the red tape, it absorbs all colors of light except for red, which it reflects back, allowing the tape to emit a red light when placed over a broken taillight.

To know more about broken taillight  refer here

https://brainly.com/question/16647309#

#SPJ11

AlCl3 + 3Li --> 3LiCl + Al



If you are given 8. 00 g of Li calculate the number of grams of aluminum produced

Answers

When 8.00 g of lithium reacts with [tex]AlCl_{3}[/tex], 10.39 g of aluminum is produced.

The molar mass of lithium (Li)= 6.94 g/mol

Moles of Li = mass of Li / molar mass of Li= 8.00 g / 6.94 g/mol = 1.154 moles

Now, 3 moles of Li produce 1 mole of Al
moles of Al produced = 1.154 moles / 3 = 0.385 moles

The molar mass of aluminum (Al)= 26.98 g/mol

Mass of Al = moles of Al × molar mass of Al= 0.385 moles × 26.98 g/mol = 10.39 g

So, when 8.00 g of lithium reacts with [tex]AlCl_{3}[/tex], 10.39 g of aluminum is produced.

To know more about stoichiometric calculations visit:

https://brainly.com/question/23742235

#SPJ11

Calculate the moles of barium phosphate that will react with 1.60 g of aluminum hydroxide. you need to write and balance the equation, then solve it.

Answers

A total of 0.0103 moles of barium phosphate will react with 1.60 g of aluminum hydroxide.

The balanced chemical equation for the reaction between barium phosphate and aluminum hydroxide is:

Ba₃(PO₄)₂ + 2 Al(OH)₃ → 2 AlPO₄ + 3 Ba(OH)₂

To calculate the moles of barium phosphate that will react with 1.60 g of aluminum hydroxide, we need to convert the given mass of aluminum hydroxide into moles using its molar mass:

Molar mass of Al(OH)₃ = 78 g/mol

Number of moles of Al(OH)₃ = 1.60 g / 78 g/mol = 0.0205 mol

According to the balanced chemical equation, 2 moles of Al(OH)3 react with 1 mole of Ba3(PO4)2. Therefore, the number of moles of Ba₃(PO₄)₂ required can be calculated as:

Number of moles of Ba₃(PO₄)₂ = (0.0205 mol Al(OH)₃) / 2 = 0.0103 mol

To know more about balanced chemical equation click on below link:

https://brainly.com/question/28294176#

#SPJ11

According to the lab introduction in your laboratory manual, the equation for sodium


carbonate dissolving in water is:


3


Na2CO3 + 2H20 – 2Na+ + 2OH- + H2CO3


When this process occurs, sodium carbonate does not 100% separate into ions.


There is always some sodium carbonate in solution.


Based on this reaction, explain whether Sample A or Sample B is most alkaline and


why.

Answers

Sample A or Sample B cannot be definitively determined as more alkaline based on the given information.  The equation for sodium carbonate dissolving in water shows that it produces both sodium ions (Na⁺) and hydroxide ions (OH⁻), which are the ions responsible for making a solution alkaline.

However, the fact that not all of the sodium carbonate dissociates into ions means that the concentration of alkaline ions in the solution will be less than the total concentration of sodium carbonate added. Therefore, the alkalinity of a sample cannot be determined solely based on the amount of sodium carbonate present.

Other factors, such as the presence of other alkaline substances or the pH of the solution, would need to be considered to determine which sample is more alkaline.

To know more about the sodium carbonate refer here :

https://brainly.com/question/13565765#

#SPJ11

what happens to a rock when its weathered? A It is moved by wind, air, or water

Answers

Fragments of weathered rocks can be moved by wind, air, or water.

What is weathering?

Weathering is a natural process that breaks down rocks and minerals into smaller pieces. When a rock is weathered, it may physically or chemically change due to exposure to elements such as water, wind, ice, and temperature changes.

Physical weathering refers to the breakdown of rock through mechanical processes, such as abrasion, pressure changes, and freeze-thaw cycles.

Chemical weathering involves the breakdown of rock through chemical reactions, such as oxidation, hydrolysis, and dissolution.

In both cases, the resulting smaller pieces of rock or mineral fragments may be moved by wind, air, or water, and may be transported to new locations.

More on rock weathering can be found here: https://brainly.com/question/29762374

#SPJ1

Using the lewis dot structures of magnesium and oxygen, predict the ionic formula.

Answers

Magnesium loses two electrons to oxygen to form Mg²⁺ and O²⁻ ions. The ionic formula for this compound can be predicted by writing the formula unit that balances the charges of the two ions. The ionic formula for magnesium oxide is MgO.

The Lewis dot structure of magnesium is Mg with two dots representing its valence electrons. The Lewis dot structure of oxygen is O with six dots representing its valence electrons.

Magnesium and oxygen form an ionic compound because magnesium loses two electrons to oxygen to form Mg²⁺ and O²⁻ ions. The ionic formula for this compound can be predicted by writing the formula unit that balances the charges of the two ions.

Since Mg²⁺ has a 2+ charge and O²⁻ has a 2- charge, the ionic formula for magnesium oxide is MgO.

To know more about the Lewis dot structure refer here :

https://brainly.com/question/20300458#

#SPJ11

An iron reacts with oxygen to produce iron (ii) oxide. if you have 23.1 g of iron and 53.22 g of oxygen, what is the maximum amount of product formed in grams?

Answers

The maximum amount of iron (II) oxide that can be formed is 176.9 g if 23.1 g of iron reacts with 53.22 g of oxygen to produce iron (ii) oxide.

The balanced chemical equation for the reaction between iron and oxygen to produce iron (II) oxide is:

4Fe + 3O₂ → 2Fe₂O₃

From the equation, we can see that 4 moles of iron react with 3 moles of oxygen to produce 2 moles of iron (II) oxide.

Calculate the number of moles of each reactant using their respective molar masses:

Number of moles of iron = 23.1 g ÷ 55.845 g/mol

= 0.414 moles

Number of moles of oxygen = 53.22 g ÷ 32 g/mol

= 1.663 moles

Since the stoichiometric ratio of iron to oxygen is 4:3, we can see that oxygen is the limiting reactant because there are only 3 moles of oxygen available for every 4 moles of iron required.

Number of moles of Fe₂O₃ = 2 ÷ 3 × 1.663

= 1.108 moles

Mass of Fe₂O₃ = 1.108 moles × 159.69 g/mol

= 176.9 g

To learn more about oxide follow the link:

brainly.com/question/15319480

#SPJ4

WILL GIVE BRAINLIEST TO BEST ANSWER - PLEASE HELP



1) List some creative ways for changing people’s perception of bugs as pests.



2) What negative environmental impacts could be associated with foraging for and farming bugs?



3) How could insect farming address some of the problems associated with food insecurity?



4) How could insect farming address some of the problems associated with food insecurity?

Answers

1) Some creative ways to change people's perception of bugs as pests could include highlighting the nutritional benefits of farming bugs for food, showcasing their role in sustainable agriculture, and promoting insect farming as a way to reduce reliance on traditional livestock farming, which can have negative environmental impacts.

2) There could be negative environmental impacts associated with foraging for and farming bugs such as habitat destruction and pesticide use. Additionally, large-scale insect farming operations could require significant resources like water and feed, potentially contributing to environmental degradation and resource depletion.

3) Insect farming could address some of the problems associated with food insecurity by providing a sustainable source of protein that is affordable and accessible to many communities. Insects require less feed and water than traditional livestock, can be raised in smaller spaces, and have a lower carbon footprint. This makes them a more efficient and sustainable food source, particularly in areas where resources are scarce.

4) Insect farming can address some of the problems associated with food insecurity (repeated question; refer to answer #3).

Learn more about "bugs": https://brainly.com/question/11073037

#SPJ11

Determine the quantity of heat


required to heat 352 g of water


from 20. 0°C to 93. 7°C in an


electric kettle.

Answers

Approximately 108,066 J of heat is required to heat 352 g of water from 20.0°C to 93.7°C in an electric kettle.

To determine the quantity of heat required to heat 352 g of water from 20.0°C to 93.7°C, we need to use the specific heat capacity of water and the equation:

q = m × c × ΔT

ΔT = change in temperature (in °C)

First, we need to calculate the change in temperature:

ΔT = final temperature - initial temperature

ΔT = 93.7°C - 20.0°C

ΔT = 73.7°C

Substituting the given values into the equation, we get:

q = 352 g × 4.184 J/g·°C × 73.7°C

q = 108,066.496 J

q ≈ 108,066 J (rounded to three significant figures)

To know more about initial temperature, here

brainly.com/question/31702242

#SPJ4

Given 2NaOH + Cl2 NaCl + NaClO + H2O


How many moles of NaOH are needed to form 2. 3 moles NaClO?

Answers

From the balanced chemical equation, we can see that for every 1 mole of NaOH reacted, we get 1 mole of NaClO produced. Therefore, 4.6 moles of NaOH are needed to form 2.3 moles of NaClO.

The chemical equation for the reaction balances out as follows:

2NaOH + Cl2 → NaCl + NaClO + H₂O

From the equation, we can see that 2 moles of NaOH react with 1 mole of Cl₂, 1 mole of NaCl, 1 mole of NaClO, and 1 mole of water. Therefore, the stoichiometric ratio of NaOH to NaClO is 2:1, i.e., 2 moles of NaOH reacts with 1 mole of NaClO.

To find out how many moles of NaOH are needed to form 2.3 moles of NaClO, we can use the following proportion:

2 moles NaOH : 1 mole NaClO = x moles NaOH : 2.3 moles NaClO

By cross-multiplication, we get:

2 moles NaOH × 2.3 moles NaClO = 1 mole NaClO × x moles NaOH

4.6 moles NaOH = x moles NaOH

To learn more about equation follow the link:

brainly.com/question/30087623

#SPJ4

How many moles of SiC are produced from 9. 3 moles of C?



SiO2 + C -> SiC + CO



I'm dyslexic and I put the completely wrong formula for my previous question, please ignore it

Answers

According to the balanced chemical equation, 1 mole of SiC is produced from 1 mole of C. Therefore, the number of moles of SiC produced from 9.3 moles of C is also 9.3 moles.

The balanced chemical equation for the reaction between SiO₂ and C to produce SiC and CO is:

SiO₂ + C ⇒ SiC + CO

The stoichiometric coefficients of C and SiC are both 1. This means that for every 1 mole of C reacted, 1 mole of SiC is produced. Therefore, if we have 9.3 moles of C, we can expect to produce 9.3 moles of SiC.

It is important to note that the balanced chemical equation assumes that the reaction goes to completion, meaning that all of the reactants are consumed and converted into products. In reality, some of the reactants may not be fully consumed, leading to a lower yield of the desired product.

To learn more about moles follow the link:

brainly.com/question/31597231

#SPJ4

PLEASE ANSWER QUICK I NEED TO FINSH THIS!!!! 20 POINTS!!!
which choice identifies the correct limiting reactant and correct reasoning?
2H2 + O2 --> 2H2O
0.4g H2 produces 0.20 mol moles H2O 1.8g O2 produces 0.22 moles H2O
A.) O2 because it was higher yield
B.) H2 because it has the lower yield
C.) H2 because it has the lower starting mass
D.) O2 because it has the higher starting mass

Answers

The limiting reactant in the chemical reaction is O₂ because because the O₂ contains the higher starting mass. The correct option is D.

The chemical equation is as :

2H₂ + O₂  --->  2H₂O

The mass of the H₂  = 0.4 g

The molar mass of the H₂  = 2 g/mol

The moles of the H₂  = mass / molar mass

The moles of the H₂  = 0.4 / 2

The moles of the H₂  = 0.2 mol

The mass of the O₂  = 1.8 g

The molar mass of the O₂  = 32 g/mol

The moles of the O₂  = mass / molar mass

The moles of the O₂  = 1.8 / 32

The moles of the O₂  = 0.056 mol

2 moles of H₂  react with 1 mol of O₂

0.056 mol of O₂ react with = 2 × 0.056 = 0.112 mol of H₂

The O₂ is the limiting reactant. The correct option is D.

To learn more about limiting reactant here

https://brainly.com/question/31897248

#SPJ1

Predict the product, if any, of reaction between methyl propanoate and CH3MgBr, then H3O+.


Draw only the product derived from the acyl portion of methyl propanoate.


If no product is formed, signify this by drawing ethane in the window.


Marvin JS - Troubleshooting Marvin JS - Compatibility

Answers

The product of the reaction between methyl propanoate and CH3MgBr, followed by H3O+ is an alcohol, specifically, 2-methyl-2-propanol.

What is magnesium oxide ?

Methyl propanoate is an ester compound made up of three carbon atoms and eight hydrogen atoms. It is a colorless liquid with a slightly sweet odor. Methyl propanoate is produced through the reaction of an alcohol and an acid. The acid used is propionic acid and the alcohol is methanol. The reaction is a condensation reaction, meaning two molecules combine to form one larger molecule with a water molecule as a by-product. Methyl propanoate is used as a solvent and a flavoring agent in foods and beverages.

This is derived from the acyl portion of the methyl propanoate, which is a carboxylic acid. The reaction proceeds via a nucleophilic acyl substitution mechanism, where the CH3MgBr acts as a nucleophile, displacing the OH group from the carboxylic acid, forming a carboxylate ion. This is then protonated by the H3O+, forming the desired alcohol product. The product is represented in the following structure:

O

|

CH3-C-OH  =>  CH3-C-O-MgBr  =>  CH3-C-OH + H3O+

To learn more about methyl propanoate

https://brainly.com/question/30173441

#SPJ4

An unmanned spacecraft sent from Earth to explore objects in space

Answers

An unmanned spacecraft is a type of spacecraft that is designed and programmed to operate without human crew on board.

These spacecraft are sent from Earth to explore various objects in space, such as planets, moons, asteroids, comets, and other celestial bodies. They are used to gather scientific data, images, and other important information that can help us learn more about the universe.

The unmanned spacecraft is equipped with a variety of instruments and sensors that allow it to study the object it is exploring. These instruments can include cameras, spectrometers, radar systems, and other scientific instruments. The spacecraft is controlled remotely from Earth, and the data it collects is transmitted back to Earth for analysis.

One of the main advantages of using unmanned spacecraft is that they can operate in environments that are too dangerous or inhospitable for humans. For example, unmanned spacecraft can explore the harsh and extreme environments of other planets or moons, where humans cannot survive.

Additionally, unmanned spacecraft are often less expensive to launch and operate than crewed missions, making them a more cost-effective option for space exploration.

In summary, unmanned spacecraft are an essential tool for exploring the vast expanse of space. They allow us to gather important data and information about our universe, and they are a key component of modern space exploration.

To know more about spacecraft, visit:

https://brainly.com/question/13478702#

#SPJ11

Calculate the mass (in grams) of an ionic compound (molar mass 153. 5g/mol) that is dissolved


in 100 g H2O if the 0. 531 M solution formed has a density of 1. 094 g/mL.

Answers

The mass of the ionic compound dissolved in 100 g of water is 7.44 grams.

To solve this problem, we need to use the formula:

m = n x M x MW

where m is the mass of the compound in grams, n is the number of moles of the compound, M is the molarity of the solution, and MW is the molar mass of the compound.

First, we need to calculate the number of moles of the compound dissolved in 100 g of water:

density of solution = mass of solution / volume of solution

volume of solution = mass of solution / density of solution = 100 g / 1.094 g/mL = 91.29 mL = 0.09129 L

moles of compound = M x volume of solution = 0.531 mol/L x 0.09129 L = 0.0485 mol

Now, we can calculate the mass of the compound:

m = n x M x MW = 0.0485 mol x 153.5 g/mol = 7.44 g

Therefore, the mass of the ionic compound dissolved in 100 g of water is 7.44 grams.

To know more about ionic compound refer to-

https://brainly.com/question/3222171

#SPJ11

The tripeptide ،
Ala-Arg_Asp

contains four ionizable groups with 9. 8, and 10. 5. Calculate the pI for this molecule

Answers

The correct answer is C. 7.0. The isolectric point for this molecule is 7.0.

First, list the pka states that the tripeptide glycylarginylglutamate which can be found

pKa_1 = 2.1

pKa_2 = 4.1

pKa_3 = 9.8

pKa_4 = 12.5

The tripeptide, Ala-Arg_Asp. The three peptide bonds that are derived from the three amino acids are called tripeptides. A few examples of tripeptides are glutathione, Eisenin, GHK-Cu, etc. tripeptides are most commonly used for improving the look of ageing signs in the skin. Now it is necessary to find the isoelectric point (pI)

pl = SUM(pKa_1 + ... + pka_n)/n

pl = (2.1 + 4.1 + 9.8 + 12.5)/4

pl = 7.1 which is approximately 7.0.

The isolectric point for this molecule is 7.0.

To learn more about tripeptide check the link below-

https://brainly.com/question/28295128

#SPJ4

Complete question-

The tripeptide glycylarginylglutamate contains four ionizable groups with pKas of 2.1, 4.1 9.8, and 12.5. Calculate the pI for this molecule.

A. 3.1

B. 6.4

C. 7.0

D. 8.3

E. 7.3

Consider the following intermediate chemical equations. 2H (g) + O2(g) â 2H, O( H (9)+F (9) ⺠2HF(g) In the final chemical equation, HF and O2 are the products that are formed through the reaction between H2O and F2. Before you can add these intermediate chemical equations, you need to alter them by multiplying the O second equation by 2 and reversing the first equation. O first equation by 2 and reversing it. O first equation by (12) and reversing the second equation. Second equation by 2 and reversing it. â

Answers

The correct set of modifications to the given chemical equations is to multiply the second equation by 2 and reverse it, option D is correct.

To obtain the final chemical equation, we need to cancel out the reactants that appear as intermediates in the two given chemical equations. In this case, we need to cancel out H₂ and F₂. The second equation shows that one H₂ molecule reacts with one F₂ molecule to produce two HF molecules. Therefore, we need two molecules of the second equation, which can be achieved by multiplying it by 2.

However, the second equation has to be reversed before multiplying it by 2. This is because, in the final chemical equation, we need to form HF and O₂ from H₂O and F₂, whereas the given second equation shows the formation of HF from H₂ and F₂, option D is correct.

To learn more about equation follow the link:

brainly.com/question/30087623

#SPJ4

The complete question is:

Consider the following intermediate chemical equations.

2H₂(g) + O₂(g) → 2H₂O(l)

H₂(g) + F₂(g) → 2HF(g)

In the final chemical equation, HF and O₂ are the products that are formed through the reaction between H₂O and F₂. Before you can add these intermediate chemical equations, you need to alter them by multiplying the:

A) second equation by 2 and reversing the first equation.

B) first equation by 2 and reversing it.

C) first equation by (1/2) and reversing the second equation.

D) second equation by 2 and reversing it.

1. Write a mechanism for the E1 elimination reaction of 2-methylcyclohexanol with phosphoric acid. Be as complete as possible and show electron flow for all steps. You should clearly indicate the mechanistic pathways that lead to each of the products formed in the reaction (there is no need to duplicate common steps, but at some point the pathways diverge)

Answers

The mechanism for the E1 elimination reaction of 2-methylcyclohexanol with phosphoric acid is Protonation of the alcohol group by phosphoric acid.

What is Protonation?

Protonation is the process of adding a proton (hydrogen ion) to a molecule or atom. The process is also known as hydrogenation or hydrideation. It occurs when a molecule or atom gains a proton, which imparts a positive charge on the molecule or atom.

The mechanism for the E1 elimination reaction of 2-methylcyclohexanol with phosphoric acid is as follows:

Step 1: Protonation of the alcohol group by phosphoric acid.

Phosphoric acid (H₃PO₄) donates a proton to the OH group of 2-methylcyclohexanol, forming an oxonium ion (H₃O⁺). Electron flow is shown in the following diagram:

[tex]O-H + H_3PO4 \rightarrow H_3O^+ + PO_4^3-[/tex]

Step 2: Deprotonation by a base.

The oxonium ion (H3O+) is then deprotonated by a base (e.g. a strong base such as NaOH). Electron flow is shown in the following diagram:

[tex]H_3O^+ + B^- \rightarrow H_2O + BH^+[/tex]

Step 3: Rearrangement of the molecule.

The deprotonated molecule rearranges to form a more stable carbocation intermediate. Electron flow is shown in the following diagram:

[tex]BH^+ \rightarrow B^+ + H^-[/tex]

Step 4: Nucleophilic attack by the alcohol group.

The carbocation intermediate is attacked by the OH group of 2-methylcyclohexanol, forming a new carbon-oxygen bond. Electron flow is shown in the following diagram:

[tex]C^+ + OH- \rightarrow C-O + H^+[/tex]

Step 5: Loss of a proton.

The molecule then loses a proton, forming the product of the reaction. Electron flow is shown in the following diagram:

[tex]C-O + H^+ \rightarrow C=O + H_2O[/tex]

To learn more about Protonation

https://brainly.com/question/15215343

#SPJ4

By law, a gallon of ice cream, sold in stores in the US, must have a

weight of at least 4. 5 pounds. Cheap ice cream has a weight of 4. 5

pounds. More expensive ice creams have a mass of 9. 0 pounds. If a

kilogram is about 2. 2 pounds and a gallon is about 3785 milliliters,

what are the densities of the cheap and expensive ice creams?

Answers

The volume of the expensive ice cream is: 0.

Densities of the cheap and expensive ice creams, we need to first convert the weights of the ice creams from pounds to kilograms.

1 pound = 0.453592 kilograms

Therefore, the weight of the cheap ice cream in kilograms is:

5 pounds * 0.453592 kilograms/pound = 2. 027 kilograms

The weight of the expensive ice cream in kilograms is:

0 pounds * 0.453592 kilograms/pound = 3. 903 kilogram

The volume of a gallon of ice cream is approximately 3785 milliliters. Therefore, the volume of the cheap ice cream is:

027 kilograms / 3785 milliliters = 0.000557 cubic meters

The volume of the expensive ice cream is:

903 kilograms / 3785 milliliters = 0.00091 cubic meters

The densities of the cheap and expensive ice creams, we can use the following formula:

density = mass / volume

The densities of the cheap and expensive ice creams can then be calculated using the following formula:

density = mass / volume

The mass of the cheap ice cream is:

027 kilograms

The volume of the cheap ice cream is:

0.000557 cubic meters

Therefore, the density of the cheap ice cream is:

027 kilograms / 0.000557 cubic meters = 35. 14 kilograms/cubic meter

The mass of the expensive ice cream is:

903 kilograms

The volume of the expensive ice cream is: 0.

Learn more about volume Visit: brainly.com/question/27710307

#SPJ4

A container is filled with helium and nitrogen gas. A hole is poked into the container and the gases are


allowed to effuse. (A) Which gas would effuse faster? (B) Calculate the rate of effusion of helium to


nitrogen gas. (C) If it takes nitrogen gas 22 sec to effuse, how long would it take the helium gas?

Answers

(A) Helium gas would effuse faster than nitrogen gas. (B) The rate of effusion of helium to nitrogen gas is approximately 4:1. (C) It would take helium gas approximately 5.5 seconds to effuse.

Part (A): The rate of effusion is directly proportional to the velocity of the gas particles, which is inversely proportional to the square root of their masses.

Helium gas has a smaller molar mass (4 g/mol) than nitrogen gas (28 g/mol), which means its particles have a higher velocity and would effuse faster.

Part (B): According to Graham's law of effusion, the rate of effusion of two gases is inversely proportional to the square root of their molar masses.

Therefore, the rate of effusion of helium to nitrogen gas can be calculated as the square root of the ratio of their molar masses, which is approximately 4:1.

Part (C): Using Graham's law of effusion again, we can set up a proportion to find the time it would take helium gas to effuse if nitrogen gas takes 22 seconds.

The ratio of the square roots of their molar masses is 1:√7, so the proportion is:

√(4/28) : √(1/√7) = 22 : x

Solving for x, we get approximately 5.5 seconds.

To know more about Graham's law, refer here:

https://brainly.com/question/8804761#

#SPJ11

If you started with 20. 0 g of a radioisotope and waited for 3 half-lives to pass, then how much would remain?

Answers

After three half-lives have passed, 2.50 g of the radioisotope would remain out of the initial 20.0 g.

If a radioisotope has a half-life of t, then the amount of the radioisotope that remains after n half-lives can be calculated using the formula:

[tex]N = N0 * (1/2)^n[/tex]

where N0 is the initial amount of the radioisotope.

If three half-lives have passed, then n = 3. Using the given initial amount of 20.0 g, we can calculate the amount that remains after three half-lives as follows:

[tex]N = N0 * (1/2)^n\\N = 20.0 g * (1/2)^3[/tex]

N = 20.0 g * (1/8)

N = 2.50 g

Therefore, after three half-lives have passed, 2.50 g of the radioisotope would remain out of the initial 20.0 g.

To know more about radioisotope refer to-

https://brainly.com/question/13076859

#SPJ11

why do you think the h-bonds only last a short time before breaking and reforming?​

Answers

Answer:

because they are poorly made

Explanation:

Other Questions
Describe the process of collecting payment (coinsurance, copays, and deductibles) from patients at the time of service. Which statement correctly describes a union shop?The worker must be a member of the union before being hired.The worker is not required to join a labor union before being hired.Non-union members can be hired provided they join the union within a specified time.Both non-union and union workers receive the same benefits and wages. question 4 a data analyst wants to include a line of code directly in their .rmd file in order to explain their process more clearly. what is this code called? 1 point documented yaml inline code markdown This scatter plot shows the relationship between the number of sweatshirts sold and the temperature outside. Sweatshirt Sales vs. Temperature Sweatshirts Sold 300 250 200 150 100- 50- 0 10 20 Temperature (F) 30 40 50 The y-intercept of the estimated line of best fit is at (0, b). Enter the approximate value of the b in the first response box. Enter the approximate slope of the estimated line of best fit in the second response box. y-intercept and slope PLEASE ANSWER ASAP THROUGHLY FOR BRAINLIEST hich of the following describes subscription pricing?multiple choiceall of the earrings in the accessory shop cost either $15, $20, $25, or $30.a customer can get a cheeseburger, french fries, and a soda for $1.50 cheaper than buying each of them individually.for $10.99 a month, customers can stream any movie in netflix's catalog.the price of the luxury car is purposely set high so as to suggest high quality and high status.the grocery store advertises special low prices on cereal to get customers into the store. Does female masturabation cause hormonal imbalance. HELP MARKING BRAINLEIST IF RIGHT ASAP someone help please!! very confusing Para las comidas de todos los das, nosotros ponemos [ Select ] ["tazas", "vasos", "copas"] en la mesa. Para una cena elegante o una fiesta, nosotros ponemos [ Select ] ["tazas", "copas", "vasos"] en la mesa. Para beber t o caf con leche, necesitas una [ Select ] ["vaso", "copa", "taza"] . Para poner azcar en tu caf espresso, necesitas una [ Select ] ["cucharita", "tenedor", "cuchillo"] Splenda, Equal y Sweet'n'Low son [ Select ] ["pimienta", "edulcorantes", "azcar"] A Fernando le gusta la salsa picante (hot) de japalepeos porque tiene mucha [ Select ] ["azcar", "pimienta", "edulcorante"] . Las papitas tienen mucha [ Select ] ["sal", "azcar", "edulcorante"] Question 3 of 12Total dynamic head (TDH) represents thethrough the system. A. what is the marginal cost of the tenth unit of output?b. what is the total cost of producing ten units of output?c. what is the average variable cost of producing ten units of output?d. what is the average fixed cost of producing ten units of output?e. what is the average total cost of producing ten units of output? Is the solvation of borax in water an exothermic or endothermic process?. a place or community that is experiencing Drought and Desertification How can you find the value of x in the expression 5x = 20? What is a single letter, number, symbol, or punctuation mark known as? Fry these Chinese vegetables quickly. Calculate the change in entropy of the system when 10. 0 g of ice at 10. 0 C is converted into water vapour at 115. 0 C and at a constant pressure of 1 bar. The molar constant-pressure heat capacities are: Cp,m(H2O(s)) = 37. 6 J K1 mol1; Cp,m(H2O(l)) = 75. 3 J K1 mol1; and Cp,m(H2O(g)) = 33. 6 J K1 mol1. The standard enthalpy of vaporization of H2O(l) is 40. 7 kJ mol1, and the standard enthalpy of fusion of H2O(l) is 6. 01 kJ mol1, both at the relevant transition temperatures What is the volume of a rectangular prism with a length of fourteen and one-fifth yards, a width of 7 yards, and a height of 8 yards? seven hundred ninety-five and one-fifth yd3 seven hundred thirty-nine and one-fifth yd3 four hundred fifty-two and four-fifths yd3 two hundred twenty-six and two-fifths yd3 Students compare different organisms and classify them into three domains, Bacteria, Archaea, and Eukarya. Which singlecharacteristic would lead the students to classify the organism automatically into the domain Eukarya?xABCDThe organism is autotrophic.The organism has a membrane-bound nucleus.The organism is motile and can move.The organism is unicell