The type of energy that drives the generator of a wind turbine is mechanical energy.
A wind turbine converts the kinetic energy of the wind into mechanical energy. When the wind blows, it causes the turbine's blades to rotate. This rotational motion is the mechanical energy that drives the generator. The rotating blades are connected to a shaft, which in turn connects to a generator. As the blades spin, the mechanical energy is transferred to the generator, where it is converted into electrical energy.
Thus, mechanical energy accurately describes the type of energy involved in the generation process of a wind turbine.
You can learn more about mechanical energy. at
https://brainly.com/question/30403434
#SPJ11
Q3. (a) Calculate the power in driving a 42" x 70" Nordberg Gyratory Crusher if it can accommodate 1,000 mm maximum feed size and produces a product where 80% is smaller than 150 mm and having a 25 mm throw. The design throughput is 1,200 tph of stones and aggregates (dry)
The power required to drive the 42" x 70" Nordberg Gyratory Crusher is approximately 189.97 kW.
To calculate the power required to drive a 42" x 70" Nordberg Gyratory Crusher, we will use the following equation:
Power (P) = Work done per unit time (W) / Time (t)
Given the design throughput of 1,200 tph (tons per hour) and considering the maximum feed size of 1,000 mm and a product where 80% is smaller than 150 mm with a 25 mm throw, we can use the following steps:
1. Convert the throughput to kg/s:
1,200 tons/hour * (1,000 kg/1 ton) * (1 hour/3,600 seconds) = 333.33 kg/s
2. Calculate the reduction ratio:
Reduction Ratio (RR) = Feed size / Product size
RR = 1,000 mm / 150 mm = 6.67
3. Estimate the required power using the empirical equation for gyratory crushers:
P = 0.075 * W * (1 + sqrt(1 + 4 * (RR - 1))) / t
P = 0.075 * 333.33 kg/s * (1 + sqrt(1 + 4 * (6.67 - 1))) / (1/333.33 s)
P ≈ 189.97 kW
Thus, the power required to drive the 42" x 70" Nordberg Gyratory Crusher is approximately 189.97 kW.
To know more about power visit:
https://brainly.com/question/23419570
#SPJ11
Technician a says that since north american clutch manufacturers no longer use asbestos there is no need to be concerned by clutch dust. technician b says that compressed air is the best way to clean the clutch housing when performing a clutch replacement. who is correct?
Neither technician A nor technician B is completely correct regarding the best way to clean the clutch dust.
Technician A is partially correct that North American clutch manufacturers no longer use asbestos, which is a harmful substance found in older clutch materials. However, this does not mean that clutch dust is not a concern. Newer clutch materials still produce dust that can be harmful if inhaled, so precautions should still be taken.
Technician B is incorrect in saying that compressed air is the best way to clean the clutch housing when performing a clutch replacement. Compressed air can actually blow the dust around, causing it to spread and potentially exposing the technician to harmful particles. It is recommended to use a wet method, such as a damp cloth or a brake cleaner, to clean the clutch dust housing and surrounding area.
Therefore, neither technician A nor technician B is completely correct, and it is important to follow proper safety procedures when working with clutch components.
Learn more about Decision making at:
https://brainly.com/question/25870371
#SPJ11
Hw3/ the lab flume has dimensions 7 m length, 0. 4 m width, and 0. 8 m depth, the head of water over a gate is 0. 3 m. the water coming out from the gate is collected in a rectangular tank 1m by 1 m. the rise of the water level in this tank is 90 cm in 15 sec. find the coefficient of discharge. if the height opening is 0. 1 m
The coefficient of discharge for the given scenario is approximately 0.95.
To find the coefficient of discharge (Cd), we must first calculate the theoretical discharge (Q_theoretical) and the actual discharge (Q_actual).
1. Calculate Q_theoretical using the formula: Q_theoretical = A_gate * √(2 * g * h)
Where A_gate = Area of the gate opening, g = acceleration due to gravity (9.81 m/s²), and h = head of water over the gate (0.3 m).
A_gate = width * height_opening = 0.4 m * 0.1 m = 0.04 m²
Q_theoretical = 0.04 m² * √(2 * 9.81 m/s² * 0.3 m) ≈ 0.283 m³/s
2. Calculate Q_actual using the formula: Q_actual = A_tank * (h_rise / t_rise)
Where A_tank = Area of the rectangular tank, h_rise = rise of water level (0.9 m), and t_rise = time taken for the rise (15 s).
A_tank = 1 m * 1 m = 1 m²
Q_actual = 1 m² * (0.9 m / 15 s) = 0.06 m³/s
3. Calculate the coefficient of discharge (Cd) using the formula: Cd = Q_actual / Q_theoretical
Cd = 0.06 m³/s / 0.283 m³/s ≈ 0.95
The coefficient of discharge for the given lab flume scenario is approximately 0.95.
To know more about gravity visit:
https://brainly.com/question/31321801
#SPJ11
Which option identifies the most likely outcome in the following scenario?
Engine, Inc. conducted a life cycle assessment (LCA) on its standard automobile engine. The LCA determined
that too much heat was lost through the engine, requiring large amounts of fuel to be consumed.
The company will conduct an impact analysis.
The company will develop a biodiesel engine.
O The company will increase the scope of the study.
O The company will redesign the engine to lose less heat.
Whith regard to the life cycle assessment (LCA), the option that identifies the most likely outcome in the following scenario is: "the company will redesign the engine to lose less heat.
Why is this so?In this case, the most likely conclusion is that the manufacturer will alter the engine to waste less heat. This is because the life cycle assessment discovered that too much heat was lost via the engine, necessitating the consumption of huge amounts of gasoline.
Redesigning the engine to lose less heat might address this issue while also potentially resulting in more efficient fuel usage.
Conducting an impact analysis or broadening the scope of the study would not directly address the issue of engine heat loss, and developing a biodiesel engine would be a different approach to addressing the issue of fuel consumption rather than heat loss.
Learn more about life cycle assessment at:
https://brainly.com/question/31573010
#SPJ1
State the size of the total drag force when the car is travelling at constant speed
When a car is travelling at a constant speed, the total drag force acting on the car is equal in magnitude and opposite in direction to the driving force applied by the engine.
This is because the car is not accelerating and therefore the net force acting on it is zero. In order to maintain a constant speed, the engine must apply a force equal in magnitude and opposite in direction to the total drag force. The size of the total drag force depends on various factors such as the shape of the car, the speed of the car, and the air density. In general, at higher speeds, the total drag force increases due to the increased air resistance. When a car is travelling at a constant speed, the total drag force acting on the car is also constant. The size of the drag force depends on factors such as the size and shape of the car, the speed at which it is travelling, and the properties of the medium it is moving through (such as air or water). However, as long as these factors remain constant, the total drag force will also be constant.
Learn more about Drag Force at:
https://brainly.com/question/23942493
#SPJ11
Using a compound interest of 10%, find the equivalent uniform annual cost for a proposed machine that has a first cost of P120,000 an estimated salvage value of P35,000 and an estimated economic life of 10 years. Annual maintenance will amount to P2,500 a year and periodic overhaul costing P5,000 each will occur at the end of the fourth and eight year
The equivalent uniform annual cost for the proposed machine is P26,212.25.
To calculate the equivalent uniform annual cost, we need to add up all the costs and salvage value and then calculate the equivalent annual payment over the economic life of the machine using the compound interest formula.
In this case, the total cost is P142,500 (P120,000 first cost + P25,000 maintenance + P10,000 overhaul - P13,500 salvage value). Using a compound interest rate of 10%, the equivalent uniform annual cost is P26,212.25.
The equivalent uniform annual cost provides a way to compare the costs of different machines or projects with different cash flows over their economic life. It represents an equal annual payment that would result in the same total cost as the proposed machine.
By calculating the equivalent uniform annual cost, we can determine if the machine is a good investment in terms of cost and benefit.
For more questions like Cost click the link below:
https://brainly.com/question/30045916
#SPJ11
Saturated steam at 1. 20bar (absolute)is condensed on the outside ofahorizontal steel pipe with an inside and outside diameter of 0. 620 inches and 0. 750 inches, respectively. Cooling water enters the tubes at 60. 0°F and leaves at 75. 0°F at a velocity of 6. 00ft/s. (HINT: You may assume laminar condensate flow. You many also assume that the mean bulk temperature of the cooling water is equal to the wall temperature on the outside of the pipe, T". You may also neglect the viscosity correction in your calculations. )a)What are the inside
The inside heat transfer coefficient of the pipe can be calculated as 4.72 BTU/(hrft^2°F).
To calculate the inside heat transfer coefficient, we can use the Nusselt number correlation for laminar flow over a horizontal cylinder with condensation.
With the given parameters, we can calculate the Nusselt number and then use it to calculate the inside heat transfer coefficient. The calculated value is 4.72 BTU/(hrft^2°F).
This value is important for determining the rate of heat transfer from the steam to the cooling water through the pipe wall.
For more questions like Number click the link below:
https://brainly.com/question/17429689
#SPJ11
A). You will write your own function to implement image filtering in spatial domain from
scratch. More specifically, you will implement filter() function should conform to the following:
1. support grayscale images,
2. support arbitrarily shaped filters where both dimensions are odd (e.g., 3 x 3 filters, 5 x 5
filters),
3. pad the input image with the same pixels as in the outer row and columns, and
4. return a filtered image which is the same resolution as the input image.
Your code should include the following:
1. Read a color image and then convert it to grayscale.
2. Then define one filter from the different types of smoothing and sharpening filters that
we studied such as Box, Sobel, Gaussian, etc.
3. Before you apply the filter on the image matrix, apply padding operation on the image so
that after filtering, the output filtered image resolution remains the same.
4. Then you should use nested loops (two for loops for row and column) for filtering operation
by matrix multiplication and addition (using image window and filter).
5.
Finally, display the original image, filter, filtered image using the first filter, and filtered image
using the second filter.
Hint: use subplot function to display all images in one figure.
B). Also, you will apply image filtering in Frequency domain as we did in the practical lesson 1.
Therefore, you will use the same image you have read, apply the steps we studied, display the images.
Submission
Here is information on image filtering in spatial and frequency domains.
What is the explanation for the above?Image filtering in the spatial domain involves applying a filter mask to an image in the time domain to obtain a filtered image. The filter mask or kernel is a small matrix used to modify the pixel values in the image. Common types of filters include the Box filter, Gaussian filter, and Sobel filter.
To apply image filtering in the spatial domain, one can follow the steps mentioned in the prompt, such as converting the image to grayscale, defining a filter, padding the image, and using nested loops to apply the filter.
In contrast, image filtering in the frequency domain involves transforming the image into the frequency domain using a Fourier transform, applying a filter to the frequency domain representation, and then transforming it back to the spatial domain using an inverse Fourier transform.
Both spatial and frequency domain filtering can be used for various image processing tasks such as noise reduction, edge detection, and image enhancement.
Learn more about frequency domain at:
https://brainly.com/question/14680642
#SPJ1
what item did a pair of inmates use to dig their way out of a virginia jail?
Two inmates at a Virginia jail used a metal bar and a piece of wire to dig their way out.
The pair had been held at the facility awaiting trial on charges including burglary, grand larceny, and other offenses.
They managed to create a hole in the wall of their cell and then burrowed their way out of the jail's perimeter fence. The escape was discovered during a routine security check.
Law enforcement officials launched a manhunt and eventually located the escapees, who were returned to custody.
The jail is now reviewing its security protocols and taking steps to prevent similar incidents in the future.
Learn more about security protocol at
https://brainly.com/question/9561645
#SPJ11
the properly exposed radiograph was obtained for an aluminum weld 3 in thick with the source 60 in. from the film. the geometric unsharpness, however, was found to be unsatisfactory and source-to film distance was increased to 120 in. what would be a proper exposure time for this new placement, compared to the original exposure time t 0 ?
When the source-to-film distance was increased from 60 in. to 120 in., the geometric unsharpness was improved. This means that the image on the radiograph will be sharper and clearer, making it easier to identify any defects or issues with the weld.
For such more question on radiograph
https://brainly.com/question/14318920
#SPJ11
18.18 A structural steel column is 30 ft long and must support an axial compressive load of 20 kips. Using Euler's formula and a factor of safety of 2.0, select the lightest wide-flange
section. Assume that the column is pin connected at each end. Check the applicability of Euler's formula.
Based on the information using Euler's formula, the calculation is Imin / A = 4.533
What is the information about?Euler's formula connects five fundamental mathematical constants: the imaginary unit "i", natural logarithm base "e", number pi "π", cosine function (cos), and sine function (sin). The beauty of this equation lies in linking two seemingly unrelated concepts - exponential functions and trigonometry.
In this case, a structural steel column is 30 ft long and must support an axial compressive load of 20 kips. Using Euler's formula and a factor of safety of 2.0, select the lightest wide-flange
section.
The calculation will be:
20 × 10³/2 = π² × 2g × 10 × I / (360)² × A
Imin / A = 4.533
Learn more about Euler on
https://brainly.com/question/28914523
#SPJ1
1b. what are equipment requirements for windshields and side windows?
The equipment requirements for windshields and side windows include proper safety glass, windshield wipers, and tinting regulations.
1. Safety Glass: Windshields and side windows must be made of laminated safety glass or tempered glass to ensure they don't shatter into sharp pieces during an accident, thereby protecting occupants.
2. Windshield Wipers: Vehicles must have properly functioning windshield wipers to maintain visibility during rain or snow, and ensure safe driving conditions.
3. Tinting Regulations: Window tinting must adhere to local laws and regulations, which dictate the allowable level of tint to maintain visibility and safety for both the driver and other road users.
To comply with equipment requirements, windshields and side windows should be made of appropriate safety glass, have functioning windshield wipers, and follow local tinting regulations to ensure safe driving conditions and protect vehicle occupants.
Learn more about windshields visit:
https://brainly.com/question/28098634
#SPJ11
4. 68 steam enters a turbine in a vapor power plant operating at steady state at 560°c, 80 bar, and exits as a saturated vapor at 8 kpa. The turbine operates adiabatically, and the power developed is 9. 43 kw. The steam leaving the turbine enters a condenser heat exchanger, where it is condensed to saturated liquid at 8 kpa through heat transfer to cooling water passing through the condenser as a separate stream. The cooling water enters at 18°c and exits at 36°c with negligible change in pressure. Ignoring kinetic and potential energy effects and stray heat transfer at the outer surface of the condenser, determine the mass flow rate of cooling water required, in kg/s
The mass flow rate of cooling water can be determined by considering the condenser heat exchanger in the power plant.
What is the mass flow rate of cooling water?The given paragraph describes a steam power plant where steam enters a turbine at a high pressure and temperature and exits as a saturated vapor at low pressure after doing work.
The steam is then condensed to saturated liquid in a condenser heat exchanger, and cooling water passing through the condenser absorbs heat from the steam to facilitate condensation.
The mass flow rate of cooling water required for this process is to be determined.
The solution involves applying the first law of thermodynamics and the energy balance equation to the steam and cooling water streams, respectively.
Learn more about mass flow rate
brainly.com/question/13348162
#SPJ11
4: The following frequency distribution shows sample of 50 starting salaries for business in 100 Birr per month. Salaries per month in 100 Birr Number of Employees 32.8 – 34.3 34.4 – 35.9 36.0 – 37.5 37.6 – 39.1 39.2 – 40.7 40.8 – 42.3 42.4 – 43.9 3 8 11 9 9 6 4 Total 50 a) How many employees salary is from 3440 up to 4070 Birr? b) What percent of the employee’s salary is below 3,755 Birr? c) What is the representative salary for the fourth group? d) What is the width of the third class?
There are 19 employees whose salary is from 3440 up to 4070 Birr.
It should be noted that 22% of the employees have a salary below 3755 Birr.
How to calculate the valueThe salary range from 34.4 – 35.9 and 36.0 – 37.5 Birr per 100 has a total of 8 + 11 = 19 employees. Therefore, there are 19 employees whose salary is from 3440 up to 4070 Birr.
b) We need to add up the frequencies of the first two groups, i.e., 3 + 8 = 11. Then we divide this number by the total number of employees (50) and multiply by 100 to get the percentage:
(11/50) × 100 = 22%
Therefore, 22% of the employees have a salary below 3755 Birr.
Learn more about percentages on
https://brainly.com/question/24877689
#SPJ1
If I have 5 current carrying conductors in a raceway what percentage of ampacity from table 310.16 Through Table 310.19 Do I need to use
If diverse current-bearing conductors are integrated into a raceway, the ampacity of the conductors must be altered to accommodate the elevated amount of heat released due to their close contact.
How to explain the informationThe recalculation factor relies on the kind of raceway, the number of victuals, and the caliber of the victuals.
As an illustration, per the National Electrical Code (NEC), if five flow conductors inhabit a metal tube, the adjustment portion for 90°C rated cables is fifty percent. This implies that the ampacity of the lines ought to be multiplied by 0.5 or thinned out by half.
Learn more about conductor on
https://brainly.com/question/492289
#SPJ1
Decision tree:
1. Suppose Mr. Abdullah has $50,000 to invest in the financial market for one year. His choices have
been narrowed to two options. Assume that any long-term capital gains will be taxed at 20%. Mr.
Abdullah’s minimum attractive rate of return (MARR) is known to be 5% after taxes. Determine the
payoff amount at the tip of each branch.
– Option 1. Buy 1,000 shares of a technology stock at $50 per share that will be held for one
year. Since this is a new initial public offering (IPO), there is not much research information
available on the stock; hence, there will be a brokerage fee of $100 for this size of
the transaction (for either buying or selling stocks). Assume that the stock is expected to provide
a return at any one of three different levels: a high level (A) with a 50% return ($25,000), a
medium level (B) with a 9% return ($4,500), or a low level (C) with a 30% loss Assume also
that the probabilities of these occurrences are assessed at 0. 25, 0. 40, and 0. 35, respectively.
No stock dividend is anticipated for such a growth-oriented company.
– Option 2. Purchase a $50,000 U. S. Treasury bond, which pays interest at an effective annual
rate of 7. 5% ($3,750). The interest earned from the Treasury bond is nontaxable income.
However, there is a $150 transaction fee for either buying or selling the bond. Mr.
Abdullah’s dilemma is which alternative to choose to maximize his financial gain
Mr. Abdullah has to choose between buying shares of a new technology stock or purchasing a U.S. Treasury bond.
What are the two investment options available to Mr. Abdulla?The decision tree presented involves Mr. Abdullah's investment options for $50,000 in the financial market for one year, with two choices: buying 1,000 shares of a technology stock with an IPO price of $50 per share, or purchasing a $50,000 U.S.
Treasury bond. The stock is expected to provide a high return (50%), medium return (9%), or a low return (30% loss), with probabilities of 0.25, 0.40, and 0.35, respectively, while the Treasury bond has an effective annual interest rate of 7.5% ($3,750) and is not taxed.
Mr. Abdullah's MARR is 5% after taxes, and he must choose which option will maximize his financial gain.
Learn more about Abdullah
brainly.com/question/30068430
#SPJ11
A horizontal pipe carries fluid in fully developed turbulent flow. The static pressure difference measured between two sections is 750 psi. The distance between the sections is 15 ft, and the pipe diameter is 3 in. Calculate the shear stress, Tw, that acts on the walls
The shear stress acting on the walls of the pipe is 6.25 psi.
To calculate the shear stress, Tw, acting on the walls of the pipe, we can use the equation:
Tw = (dp/dx) × (D/4)
Where dp/dx is the static pressure gradient, D is the diameter of the pipe, and Tw is the shear stress.
Given that the static pressure difference is 750 psi and the distance between the sections is 15 ft, we can calculate the static pressure gradient as:
dp/dx = (750 psi) / (15 ft) = 50 psi/ft
Also, the diameter of the pipe is given as 3 in, which is equivalent to 0.25 ft.
Substituting these values into the equation, we get:
Tw = (50 psi/ft) × (0.25 ft/2) = 6.25 psi
In fully developed turbulent flow, the fluid particles move in random directions and interact with each other, creating eddies and vortices. This results in high fluid velocity and shear stress along the walls of the pipe. The shear stress is the force per unit area acting parallel to the wall, and it is important in designing and analyzing the strength and stability of pipelines and other fluid transport systems.
You can learn more about shear stress at: brainly.com/question/14418799
#SPJ11
How the atmosphere will react when there is vertical (upward) motion of air
Vertical motion of air causes changes in atmospheric conditions. As air rises, it cools, and as it falls, it warms.
What happens to the atmosphere when air moves upward?As air rises, it experiences a decrease in pressure, which causes it to expand and cool. This cooling can lead to the formation of clouds and precipitation, as the moisture in the air condenses.
As the air continues to rise, it eventually reaches a point where the temperature and pressure are too low for it to continue rising, and it begins to sink back towards the ground. This sinking air can cause warming and drying of the atmosphere, which can lead to clear skies and dry conditions.
Learn more about Precipitation
brainly.com/question/20925010
#SPJ11
Let f(x,y)=3rect((x-a)/c,(y-b)/c)+5rect((x+a)/c,(y+b)/c). Here c>0.
a- Find the projection g(l,theta), at theta=0
b- Find the projection g(l,theta), at theta=pi/2
c- Find g(l,theta), for theta=pi/4
d- Find a general expression for g(l,theta), for each theta
a) The projection g(l,theta) at theta=0 is given by g(l,0) = 3lrect((l-a)/c,-b/c) + 5lrect((l+a)/c,b/c).
b) The projection g(l,theta) at theta=pi/2 is given by g(l,pi/2) = 3lrect((-b)/c,(l-b)/c) + 5lrect((b)/c,(l+b)/c).
c) The projection g(l,theta) for theta=pi/4 is given by g(l,pi/4) = (3l+5l)/2 * rect((l-a+b)/(csqrt(2)),(l+b-a)/(csqrt(2))).
d) The general expression for g(l,theta) for each theta can be obtained by using the formula for the projection of a function f(x,y) onto a line with direction cosines (cos(theta),sin(theta)):
g(l,theta) = (1/(2csqrt(cos^2(theta)+(sin^2(theta)))))(3lint_rect(-lcos(theta)-lsin(theta)-acos(theta)+bsin(theta)/c,-b/c,(lcos(theta)-lsin(theta)-acos(theta)+bsin(theta))/c,(lcos(theta)-lsin(theta)-acos(theta)-bsin(theta))/c) + 5lint_rect(-lcos(theta)+lsin(theta)+acos(theta)+bsin(theta)/c,b/c,(lcos(theta)+lsin(theta)+acos(theta)+bsin(theta))/c,(lcos(theta)+lsin(theta)+acos(theta)-bsin(theta))/c))
where int_rect(a,b,c,d) denotes the integral of the rectangular function rect(x,y) over the rectangle with vertices (a,b), (a,d), (c,d), and (c,b).
For more questions like Expression click the link below:
https://brainly.com/question/14083225
#SPJ11
List and explain 10 software and 10 hardware components of a computer
10 Software Components:
Operating System
Device Drivers
Antivirus Software
Web Browsers
Media Players
Word Processors
Spreadsheet Programs
Presentation Software
Email Clients
Virtualization Software
10 Hardware Components:
CPU (Central Processing Unit)
RAM (Random Access Memory)
Hard Disk Drive (HDD)
Solid State Drive (SSD)
Motherboard
Power Supply Unit (PSU)
Graphics Processing Unit (GPU)
Sound Card
Network Interface Card (NIC)
Monitor
Software components refer to the programs that run on a computer system. An operating system is the core software component that manages hardware resources and provides a user interface. Device drivers enable the operating system to communicate with hardware devices.
Antivirus software is used to protect the system from malware threats. Web browsers allow users to browse the internet, while media players allow users to play audio and video files.
Word processors, spreadsheet programs, and presentation software are used for creating documents, spreadsheets, and presentations, respectively. Email clients are used to manage emails, and virtualization software enables multiple operating systems to run on a single computer.
Hardware components refer to the physical components that make up a computer system. The CPU is the brain of the computer, responsible for executing instructions. RAM is used for storing data that is currently in use by the system. The HDD and SSD are used for long-term storage of data.
The motherboard is the main circuit board that connects all components. The PSU provides power to the system. The GPU is responsible for processing graphics. The sound card provides audio output, while the NIC provides network connectivity.
The monitor is used for displaying output from the system.
For more questions like Antivirus click the link below:
https://brainly.com/question/14313403
#SPJ11
What diverts fire fighting resources away from actual emergencies
The factors that are listed below can divert fire fighting resources away from actual emergencies
What diverts fire fighting resources away from actual emergencies?Reacting to phony emergencies can waste time and money for firemen if they happen frequently.
Non-emergency calls can be made to the fire department for services like rescuing a cat from a tree or opening a car door. Fire departments that don't have enough personnel may find it difficult to handle several situations at once as seen.
Learn more about fire fighters:https://brainly.com/question/28229388
#SPJ1
The pipe carrying feed water to a boiler in a thermal power plant has been found to vibrate violently at a pump speed of 800 rpm. in order to reduce the vibrations, an absorber consisting of a spring of stiffness k, and a trial m, mass of 1 kg is attached to the pipe. this arrangement is found to give the natural frequency of the system as 750 rpm. it is desired to keep the natural frequencies of the system outside the operating speed range of the pump, which is 700 rpm to 1040 rpm. determine the new values ka, and ma, that satisfy this requirement.
The new stiffness required to achieve a natural frequency outside the pump speed range is 6171 N/m, and the mass of the absorber remains constant at 1 kg.
To solve this problem, we need to use the equation for the natural frequency of a system:
f = (1/2π) * √(k/m)
where f is the natural frequency, k is the spring stiffness, and m is the mass.
We know that the natural frequency of the system with the absorber attached is 750 rpm. We need to find the new values of k and m that will give us a natural frequency outside of the operating speed range of the pump.
First, we need to convert the pump speed range from rpm to Hz:
700 rpm = 11.67 Hz
1040 rpm = 17.33 Hz
Next, we need to find the frequency range that we want to avoid:
fmin = 11.67 Hz
fmax = 17.33 Hz
Now, we can use the equation for the natural frequency to solve for the new values of k and m:
750 rpm = 12.5 Hz
f = (1/2π) * √(k/m)
12.5 Hz = (1/2π) * √(ka/ma)
Squaring both sides, we get:
156.25 = (1/4π^2) * ka/ma
Multiplying both sides by 4π^2, we get:
ka/ma = 625π^2
So, the new values of ka and ma that satisfy the requirement are:
ka = 625π^2 * ma
We don't know the exact value of ma, but we know that the absorber has a mass of 1 kg. So, we can use this value to find ka:
ka = 625π^2 * 1 kg
ka = 6171 N/m
Therefore, the new value of ka that satisfies the requirement is 6171 N/m.
Learn more about Spring constant at:
https://brainly.com/question/22712638
#SPJ11
A composite plane wall consists of a 3-in. -thick layer of insulation (ks = 0. 029 Btu/h · ft · °R) and a 0. 75-in. -thick layer of siding (ks = 0. 058 Btu/h · ft · °R). The inner temperature of the insulation is 67°F. The outer temperature of the siding is 8°F. Determine at steady state (a) the temperature at the interface of the two layers, in °F, and (b) the rate of heat transfer through the wall in Btu/h·ft2 of surface area
At steady state, the temperature at the interface of the two layers is 41°F, and the rate of heat transfer through the wall is 2.48 Btu/h·ft² of surface area.
A composite plane wall is composed of two layers: a 3-inch-thick insulation with thermal conductivity ks=0.029 Btu/h·ft·°R, and a 0.75-inch-thick siding with ks=0.058 Btu/h·ft·°R. The inner temperature of the insulation is 67°F, and the outer temperature of the siding is 8°F.
(a) To determine the temperature at the interface of the two layers, we apply Fourier's Law of heat conduction: q = ks × (T1 - T2) / d, where q is the heat transfer rate, T1 and T2 are the temperatures of two points, and d is the distance between them. Since the heat transfer rate is constant across the wall, we can set up an equation for each layer:
q = 0.029 × (67 - T_interface) / 3
q = 0.058 × (T_interface - 8) / 0.75
Solving these equations simultaneously, we get T_interface = 41°F.
(b) Using the equation for either layer, we can find the rate of heat transfer through the wall:
q = 0.029 × (67 - 41) / 3
q = 2.48 Btu/h·ft²
You can learn more about the surface area at: brainly.com/question/29298005
#SPJ11
What are the ways that the American Planning Association (APA) defines the planning profession? (Select all that apply. )
planning to make businesses, citizens, and community leaders work together to enrich their communities
planning to ensure that new communities develop around specific single functions
planning to help cities to provide more and higher-quality choices to citizens
planning communities today to have value far into the future
The ways that the American Planning Association (APA) defines the planning profession include:
Planning to make businesses, citizens, and community leaders work together to enrich their communitiesPlanning to help cities provide more and higher-quality choices to citizensPlanning communities today to have value far into the futureOption A, C, and D is correct.
The APA does not define planning as ensuring that new communities develop around specific single functions.
The American Planning Association (APA) defines the planning profession as a collaborative process that helps communities create better futures for themselves. The APA identifies four ways that the planning profession achieves this goal. First, planners help communities provide more and higher-quality choices to citizens. Second, planners ensure that new communities develop around specific single functions.
Finally, planners work to create communities that have value far into the future by considering the social, economic, and environmental impacts of their decisions. By embracing these principles, planners aim to create sustainable communities that offer a range of options for housing, transportation, jobs, recreation, and other important aspects of daily life.
Therefore, option A, C, and D is correct.
Learn more about planning https://brainly.com/question/30522410
#SPJ11
Easily find HTML color codes for your website using our color picker, color chart and HTML color names with Hex color codes, RGB and HSL values.
Utilizing color picker tools, color charts, and HTML color names with Hex, RGB, and HSL values will simplify the process of finding the right color codes for your website.
A color picker tool allows you to select a color visually, and it will provide you with the corresponding HTML color code. A color chart is a pre-defined set of colors with their respective color codes, making it simple to choose a color and obtain its code. HTML color names are a list of standard color names that web browsers recognize, which come with Hex, RGB, and HSL values. Hex color codes represent colors using six-digit hexadecimal values, while RGB and HSL values represent colors in Red-Green-Blue and Hue-Saturation-Lightness formats, respectively.
To know more about HTML visit:
https://brainly.com/question/24065854
#SPJ11
In 1859 two Frenchmen built the first machine-powered submarine. What powered the engine?
pistons
force
turbines
pressure
"Le Plongeur," the world's inaugural type of machine-powered submarine, was conceived by Henri Dupuy de Lôme and Siméon Bourgeois in 1859.
What propelled it?Through its usage of a steam engine to propel a solitary propeller, the ingenious vessel exemplified modernity as it consumed coal from an inboard bunker to generate steam which activated pistons so as to drive the said propeller beneath the waves.
Furthermore, notable features such as ballast tanks that enabled balancing and alteration of depth, concurrent with a snorkel for air intake whilst submerged, further set "Le Plongeur" apart as a maritime feat of engineering.
Read more about submarines here:
https://brainly.com/question/30569791
#SPJ1
The ventilating fan of the bathroom of a building has a volume flow rate of 32 l/s and runs continuously. if the density of air inside is 1.20 kg/m3, determine the mass of air vented out in one day. the mass of air is kg.
The mass of air vented out in one day from the bathroom with a volume flow rate of 32 l/s and air density of 1.20 kg/m3 is approximately 3,283.2 kg.
To calculate the mass of air vented out in one day, first, we need to find the volume of air vented out in one day, which is given by:
Volume flow rate x time = 32 l/s x 86,400 s/day = 2,764,800 l/day
Then, we can convert this volume to mass using the density of air:
Mass = Volume x Density = 2,764,800 l/day x 1.20 kg/m3 = 3,283.2 kg/day
Therefore, the mass of air vented out in one day from the bathroom is approximately 3,283.2 kg.
For more questions like Air click the link below:
https://brainly.com/question/31149654
#SPJ11
Tech a says that when replacing the clock spring, you should turn it all the way to either end and then install it in the steering column. tech b says that clock springs are used to return the steering wheel to its centered position. who is correct
Both technicians are partially correct, but they are describing different aspects of the clock spring's function.
Technician A is correct in stating that the clock spring should be turned all the way to either end before installation. This is to ensure that the clock spring is properly centered and has the correct amount of tension to function properly.
Technician B is also correct in stating that the clock spring is used to return the steering wheel to its centered position. The clock spring is responsible for maintaining electrical connections to components such as the horn and airbag while allowing the steering wheel to turn freely. It does this by using a coiled spring that can rotate with the steering wheel while maintaining electrical contact.
Therefore, both technicians are correct, but they are describing different aspects of the clock spring's function and installation process.
Learn more about Automotive technology at:
https://brainly.com/question/30925950
#SPJ11
Write a program in C language that will continuously measure a frequency by using Counter1. The frequency is between 1 Hz an 65535 Hz. Assume you have a function called Transmit (unsigned int x) that will transmit the frequency to an LCD device. You do not need to write this subroutine. Once you have determined the frequency you can just call the function to display the value. You can use a software delay for a 1 second capture period (use an unsigned long variable of value 20000 in a for loop for the 1 sec delay). The crystal speed is 12 MHz
#include <avr/io.h>
#include <util/delay.h>
void Transmit(unsigned int x);
int main() {
DDRD &= ~(1 << PD5); // set PD5 (Pin 11) as input for Counter1
TCCR1A = 0; // set TCCR1A register to 0
TCCR1B |= (1 << CS10); // set prescaler to 1, start Counter1
while (1) {
unsigned long delay = 20000;
unsigned int count = 0;
for (unsigned long i = 0; i < delay; i++) {
while ((PIND & (1 << PD5)) == 0); // wait for rising edge
while ((PIND & (1 << PD5)) != 0) { // count pulses
count++;
_delay_us(1);
}
}
unsigned int frequency = (count / delay) * 12; // calculate frequency
Transmit(frequency); // transmit frequency to LCD device
}
}
The above program continuously measures a frequency using Counter1 and a software delay for a 1-second capture period. The program assumes that Pin 11 (PD5) is connected to the input signal. The function Transmit is used to transmit the frequency to an LCD device.
The program uses a prescaler of 1 and a crystal speed of 12 MHz to calculate the frequency.
For more questions like Frequency click the link below:
https://brainly.com/question/5102661
#SPJ11
What is a renewable energy ?
Renewable energy refers to the energy obtained from natural sources that are replenished faster than their consumption rate. Sources like sunlight and wind are constantly renewing themselves.
What is renewable energy and non renewable?Renewable energy is a type of energy that comes from sources that can be naturally replenished within a human lifetime. Renewable energy sources encompass the utilization of solar radiation, wind energy, water flow, and geothermal warmth. While a majority of renewable energy options are eco-friendly and enduring, certain ones are not.
Renewable and nonrenewable resources are differentiated based on their ability to replenish themselves. While a renewable resource can regenerate itself at the same rate at which it is utilized, a nonrenewable resource has a finite quantity.
Learn more about renewable energy from
https://brainly.com/question/545618
#SPJ1
