What is the mass in grams are in 3. 45 x 10E24 atoms of carbon

The new volume of the gas is approximately 6.62 L.

To find the new volume of the gas when the pressure changes from 735 mmHg to 800 mmHg and the temperature remains constant, we can use Boyle's Law, which states that the product of pressure and volume is constant for a given amount of gas at a constant temperature. In mathematical terms, this is represented as:
P₁V₁ = P₂V₂

where P₁ and V₁ are the initial pressure and volume, and P₂ and V₂ are the final pressure and volume.

Given the initial conditions:
P₁ = 735 mmHg
V₁ = 7.2 L
P₂ = 800 mmHg

We want to find V₂. Rearrange the equation to solve for V₂:
V₂ = (P₁V₁) / P₂

Now, plug in the values:

V₂ = (735 mmHg × 7.2 L) / 800 mmHg
V₂ = 5268 / 800
V₂ ≈ 6.585 L

Among the given options, the closest answer to 6.585 L is 6.62 L. Therefore, the new volume of the gas is approximately 6.62 L.

To know more about Boyle's Law :

https://brainly.com/question/1437490

#SPJ11

295 g of carbon dioxide will be produced.

The balanced chemical equation for the complete combustion of propane is:

[tex]C3H8 + 5O2 → 3CO2 + 4H2O[/tex]

From the equation, we can see that 1 mole of propane produces 3 moles of carbon dioxide. We can use the ideal gas law to determine the number of moles of propane present in 2.55 L at 30°C and 67.2 kPa:

PV = nRT

n = PV/RT

n = (67.2 kPa)(2.55 L)/(0.0821 L·atm/mol·K)(303 K)

n = 2.24 mol

Therefore, the amount of carbon dioxide produced will be:

3 mol [tex]CO2[/tex]/mol [tex]C3H8[/tex] × 2.24 mol [tex]C3H8[/tex] = 6.72 mol [tex]CO2[/tex]

Finally, we can use the molar mass of carbon dioxide to convert moles to mass:

6.72 mol [tex]CO2[/tex] × 44.01 g/mol [tex]CO2[/tex] = 295 g [tex]CO2[/tex]

Therefore, 295 g of carbon dioxide will be produced.

To know more about ideal gas law refer to-

https://brainly.com/question/28257995

#SPJ11

The description that fits the reaction that was observed is endothermic because heat is being absorbed from the surroundings. Option D

Endothermic reaction stores energy. In the reaction that has occurred, heat energy was absorbed from the enviroment which makes the beaker to become cold.

Assuming it was an exothermic reaction, heat energy  would have been released to the surrounding of the beaker. the beaker would have felt warm or hot to the touch,

Find more exercises on endothermic reaction;

https://brainly.com/question/10373907

#SPJ1

The age of the artifact is approximately 25313.5 years.

The age of an archaeological artifact can be determined by measuring the decay rate of carbon-14 present in the sample. The decay rate of carbon-14 follows an exponential decay equation given by:

[tex]N = N0 * e^(-kt)[/tex]

where N is the remaining amount of carbon-14 after time t, N0 is the initial amount of carbon-14, k is the decay constant, and t is the time elapsed since the death of the organism.

The decay constant (λ) is related to the half-life (t1/2) by the equation:

λ = ln(2) / t1/2

Substituting the given values, we can calculate the decay constant for carbon-14:

λ = ln(2) / t1/2 = ln(2) / 5730 = 0.000120968

Now, we can use the decay rate of carbon-14 for the artifact and the decay constant to calculate its age:

[tex]N = N0 * e^(-kt)[/tex]

[tex]2.75 dis/min·gc = N0 * e^(-0.000120968*t)[/tex]

Assuming that the decay rate of a living organism is 15.3 dis/min·gc, we can calculate the initial amount of carbon-14 present in the artifact:

[tex]15.3 dis/min·gc = N0 * e^(-0.000120968*0)[/tex]

N0 = 15.3 dis/min·gc

Substituting the values, we get:

[tex]2.75 dis/min·gc = 15.3 dis/min·gc * e^(-0.000120968t)\\0.180 = e^(-0.000120968t)[/tex]

Taking the natural logarithm of both sides, we get:

[tex]ln(0.180) = -0.000120968*t[/tex]

t = ln(0.180) / (-0.000120968)

Solving for t, we get:

t = 25313.5 years

Therefore, the age of the artifact is approximately 25313.5 years.

To know more about artifact  refer to-

https://brainly.com/question/17362933

#SPJ11

This investigation will explain why Joe's 2kg barbell was much hotter than his 10kg barbell after being left in the sun for the same amount of time. Heat is transferred through a process called conduction, which is the direct transfer of thermal energy between two objects in contact. This process is directly proportional to the thermal conductivity of the material and the surface area between the two objects.

Since Joe's 2kg barbell has a smaller surface area than his 10kg barbell, it will experience more heat transfer in a given time period, making it hotter than the 10kg barbell.

Additionally, certain materials have higher thermal conductivities than others, meaning they can transfer heat more quickly. Thus, the material of both barbells could also have a significant effect on the amount of heat transferred to each.

Ultimately, this investigation will explain why Joe's 2kg barbell became hotter than his 10kg barbell in a similar time period, based on their respective surface areas and the materials of which they are made.

Know more about Thermal energy here

https://brainly.com/question/18989562#

#SPJ11

4 moles of water (option b) are produced when 5 moles of hydrogen gas react with 2 moles of oxygen gas.

To determine how many moles of water are produced when 5 moles of hydrogen gas react with 2 moles of oxygen gas, you need to consider the balanced chemical equation for the reaction:

2H₂ (hydrogen) + O₂ (oxygen) → 2H₂O (water)

From the equation, you can see that 2 moles of hydrogen gas react with 1 mole of oxygen gas to produce 2 moles of water. To find out how many moles of water are produced in your scenario:

Step 1: Determine the limiting reactant. Hydrogen is present in excess (5 moles) compared to oxygen (2 moles). Oxygen will be the limiting reactant since it is present in a smaller amount.

Step 2: Calculate the moles of water produced using the stoichiometric ratios in the balanced equation. Since 1 mole of oxygen gas can produce 2 moles of water, 2 moles of oxygen gas will produce:

2 moles O₂ × (2 moles H₂O / 1 mole O₂) = 4 moles of water

Therefore, the answer is b. 4 moles of water are produced.

Learn more about oxygen at https://brainly.com/question/28009615

#SPJ11

Potassium bromide must be molten during electrolysis to allow the movement of potassium (K+) and bromide (Br-) ions, which are necessary for the conduction of electricity and the subsequent chemical reactions at the electrodes.

In the electrolysis of potassium bromide (KBr), the solid compound must be turned into a molten state for the process to occur efficiently.

This is because, in a solid state, the potassium (K+) and bromide (Br-) ions are held together in a rigid crystal lattice structure, preventing them from moving freely. When KBr is molten, the ionic bonds holding the lattice together are broken, allowing the ions to move independently.

During electrolysis, an electric current is passed through the molten KBr, causing the K+ ions to migrate towards the negative electrode (cathode) and the Br- ions towards the positive electrode (anode).

At the cathode, K+ ions gain electrons and are reduced to potassium metal, while at the anode, Br- ions lose electrons and are oxidized to bromine gas. This movement and reaction of ions are only possible when KBr is in its molten state.

To know more about electrolysis click on below link:

https://brainly.com/question/31726896#

#SPJ11

The balanced equation for the decomposition of carbonic acid (H₂CO₃) is H₂CO₃ → H₂O + CO₂.

In this reaction, carbonic acid (H₂CO₃) decomposes into water (H₂O) and carbon dioxide (CO₂). When baking soda (NaHCO₃) and vinegar (CH₃COOH) react, one of the products formed is carbonic acid.

This carbonic acid is unstable and quickly decomposes into water and carbon dioxide gas. The release of carbon dioxide gas creates the bubbling effect observed in this reaction.

The balanced equation demonstrates that for every one molecule of carbonic acid that decomposes, one molecule of water and one molecule of carbon dioxide gas are produced. This reaction plays an important role in everyday applications such as baking and science experiments.

To know more about balanced equation click on below link:

https://brainly.com/question/7181548#

#SPJ11

The pressure inside the container is 4.57a atm.

To solve for the pressure inside the container, we can use the Ideal Gas Law equation, which states:

PV = nRT

Where:
P = pressure (in atm)
V = volume (in liters)
n = moles
R = gas constant (0.08206 L.atm/mol.K)
T = temperature (in Kelvin)

Plugging in the given values, we get:

P(2.3 L) = (0.39 mol)(0.08206 L.atm/mol.K)(315 K)

Simplifying this equation, we get:

P = (0.39 mol)(0.08206 L.atm/mol.K)(315 K) / 2.3 L

P = 4.57 atm

Therefore, the pressure inside the container is 4.57 atm.

Know more about Ideal Gas Law equation here:

https://brainly.com/question/4147359

#SPJ11

To solve the financial dilemma, the chemical company can consider using the excess silver nitrate solution to synthesize silver nanoparticles, which have various applications in industries.

Silver nanoparticles can be synthesized by reducing silver ions with a reducing agent, and silver nitrate can serve as a source of silver ions.

One possible reaction for the synthesis of silver nanoparticles using silver nitrate is the reduction of silver ions with sodium borohydride (NaBH4). The reaction can be represented as:

AgNO3 + NaBH4 → Ag nanoparticles + NaNO3 + B2H6

In this reaction, silver nitrate is the oxidizing agent, which accepts electrons, while sodium borohydride is the reducing agent, which donates electrons to reduce the silver ions. The reaction also produces sodium nitrate and borane gas as byproducts.

The synthesized silver nanoparticles can be sold to various industries, generating revenue for the company and potentially reducing their debt. The company can also consider optimizing the synthesis process to increase the yield and purity of the silver nanoparticles, which can increase their market value.

Learn more about silver nanoparticles here: https://brainly.com/question/16055011

#SPJ1

The common mode of action based on the principle of like-dissolves-like and the concept of solvent-solute interactions is called solvation.

Solute-solvent interactions are described as the intermolecular attractions between a solute particle and a solvent particle.

So in the case that If the intermolecular attractions between solute particles are different compared to the intermolecular attractions between solvent particles it is unlikely dissolution will occur.

An example of  Solute-solvent interactions is when you add salt to water the salt dissolves and distributes uniformly within the water. There is more water than salt. So then we know that water is the solvent.

Learn more about solvent. at:

https://brainly.com/question/25326161

#SPJ1

The animal you are describing is a chipmunk. It has a backbone, nurses its offspring, likes to gnaw, has a bushy tail, stores food for winter, and has stripes on its back.

A chipmunk is a small mammal belonging to the Sciuridae family, which also includes squirrels. Chipmunks possess a backbone, making them vertebrates.

As mammals, they nurse theiroffsprin, providing them with nutrients and care. Their sharp incisors allow them to gnaw on various foods, such as nuts and seeds. Their bushy tail is an identifying feature that aids in balance while climbing and jumping.

Chipmunks are known for storing food, particularly during winter months when resources are scarce. This food hoarding is possible due to their cheek pouches, which they use to carry and store food. The distinctive stripes on their back serve as a camouflage, allowing them to blend into their environment and avoid predators.

To know more about offspring click on below link:

https://brainly.com/question/29188690#

#SPJ11

If 44.0 grams of sodium reacts with 10.0 grams of chlorine gas, 54.0 grams of sodium chloride could potentially be formed in the reaction: 2 Na(s) + Cl₂(g) ⟶ 2 NaCl(s).


1. Calculate the moles of sodium and chlorine:
  - moles of Na = mass (g) / molar mass = 44.0 g / 22.99 g/mol = 1.91 mol
  - moles of Cl₂ = mass (g) / molar mass = 10.0 g / 70.90 g/mol = 0.141 mol

2. Determine the limiting reactant by dividing the moles of each reactant by their stoichiometric coefficients:
  - Na: 1.91 mol / 2 = 0.955
  - Cl₂: 0.141 mol / 1 = 0.141

3. Since the value for Cl₂ is lower, chlorine gas is the limiting reactant.

4. Calculate the moles of NaCl produced using the stoichiometry of the reaction:
  - moles of NaCl = moles of Cl₂ × (2 moles of NaCl / 1 mole of Cl₂) = 0.141 × 2 = 0.282 mol

5. Calculate the mass of NaCl produced:
  - mass of NaCl = moles × molar mass = 0.282 mol × 58.44 g/mol = 54.0 g

To know more about limiting reactant click on below link:

https://brainly.com/question/14225536#

#SPJ11

The molar mass of the unidentified gas is 40.06 g/mol.

To calculate the molar mass of the gas, we can use the ideal gas law, PV=nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

We can rearrange this equation to solve for the number of moles:

n = PV/RT

We can then use the definition of density, d = m/V, where m is the mass, to solve for the mass of the gas:

m = dV

We can substitute these expressions into the equation for n:

n = (dV)P/RT

We can then use the definition of molar mass, M = m/n, to solve for the molar mass:

M = m/n = (dV)P/RT

Substituting the given values, we have:

M = (2.40 g/L)(0.820 atm)(22.4 L/mol)/(0.0821 L·atm/mol·K)(318 K) = 40.06 g/mol

To know more about molar mass, refer here:

https://brainly.com/question/22997914#

#SPJ11

A. 4,7,2,4 set of coefficients will balance the chemical equation below:

4FeS (s) + 7O2 (g) 2Fe2O3 (s) +4SO2 (g)

Stoichiometric coefficients are the numbers required to balance a chemical equation. These are essential because they connect the amounts of reactants used and the products produced. The coefficients are related to the equilibrium constants since they are used to calculate them.

The coefficients indicate how many of each ingredient are present throughout the reaction and can be changed to make the equation balanced.

It makes sense that H2O has a bond order of 2, whereas NH3 has a bond order of 3, given the number of bonds each possesses.

learn more about chemical equation

brainly.com/question/11904811

#SPJ1

The hot pack has a 0.868 J/g°C heat capacity.

To solve this problem, we can use the formula:
q = mcΔT

where q is the heat transferred, m is the mass of the object, c is the specific heat capacity, and ΔT is the change in temperature.

First, let's find the heat transferred by the hot pack to warm up the water:
q = mcΔT
q = (30.0 g)(c)(85°C - 25°C)
q = 20400c J

Next, let's find the heat transferred by the hot pack to warm up the insulated pouch and the food:
q = mcΔT
q = (30.0 g)(c)(40°C - 25°C)
q = 450c J

The total heat transferred by the hot pack is the sum of these two values:
q total = 20400c J + 450c J
q total = 20850c J

Finally, we can use the heat transferred by the hot pack to solve for its specific heat capacity:
q total = mcΔT
20850c J = (30.0 g)(c)(85°C - 25°C) + (30.0 g)(c)(40°C - 25°C)
20850c J = 24000c J
c = 0.868 J/g°C

Therefore, the heat capacity of the hot pack is 0.868 J/g°C.

For more question on heat capacity

https://brainly.com/question/29792498

#SPJ11

The element Sc (Scandium) was present in Mendeleev's periodic table. Therefore, the correct answer is (a) Sc.

Mendeleev's periodic table:

Mendeleev's periodic table is a chart that organizes all known elements based on their atomic number, chemical properties, and recurring patterns in their physical and chemical properties.

The periodic table consists of rows (called periods) and columns (called groups). Elements in the same group have similar chemical properties, while elements in the same period have the same number of electron shells.

Mendeleev published the first version of his periodic table in 1869, which included 63 elements known at that time. Scandium (Sc) was discovered in 1879 by Lars Fredrik Nilson and was later added to the periodic table in its proper position based on its atomic number and chemical properties.

On the other hand, Technetium (Tc) was not present in Mendeleev's periodic table because it was not discovered until 1937, long after Mendeleev's death. Similarly, Germanium (Ge) was not discovered until 1886, after the publication of Mendeleev's periodic table, but it was added to the periodic table in its proper position based on its properties.

To know more about electron shells, visit:

https://brainly.com/question/30464976

#SPJ9

The standard cell potential (∆°cell) can be calculated using the formula:

∆°cell = ∆°reduction (reduced) - ∆°oxidation (oxidized)

where ∆°reduction and ∆°oxidation are the standard reduction potentials of the reduction and oxidation half-reactions, respectively.

The oxidation half-reaction is:

Ni2+(aq) + 2e- → Ni(s) ∆°oxidation = - 0.26 V

The reduction half-reaction is:

Mg2+(aq) + 2e- → Mg(s) ∆°reduction = - 2.37 V

Therefore, the standard cell potential is:

∆°cell = ∆°reduction - ∆°oxidation

∆°cell = (-2.37 V) - (-0.26 V)

∆°cell = -2.11 V

The equilibrium constant (K) can be calculated from the standard cell potential using the Nernst equation:

∆°cell = -(RT/nF) ln K

where R is the gas constant (8.314 J/(mol·K)), T is the temperature in Kelvin (298 K), n is the number of electrons transferred in the balanced equation (2), and F is the Faraday constant (96,485 C/mol).

Substituting the values and solving for K, we get:

K = exp(-(∆°cell)/(RT/nF))

K = exp(-((-2.11 V)*(96,485 C/mol)/(8.314 J/(mol·K)298 K2)))

K = 1.1 × 10^12

Therefore, the equilibrium constant for the reaction is 1.1 × 10^12.

Visit here to learn more about Nernst equation brainly.com/question/13043546

#SPJ11

Sound is not always an indicator of an exothermic reaction. While some exothermic reactions may produce sound, others may not.

However, certain exothermic reactions that produce a lot of heat can cause nearby air molecules to rapidly expand and create pressure waves, which we hear as a sound.

For example, combustion reactions that involve burning fuels such as gasoline, natural gas, or propane can produce a loud, explosive sound as the fuel rapidly oxidizes and releases a large amount of energy in the form of heat and light.

Additionally, some exothermic reactions can cause materials to break or shatter, producing a loud cracking or popping sound. For example, the reaction between baking soda and vinegar produces carbon dioxide gas, which can cause a balloon filled with the mixture to pop with a loud sound.

So while sound alone is not conclusive evidence of an exothermic reaction, it can be a possible indicator in certain cases where the reaction produces a significant amount of heat or causes physical changes in the surrounding materials.

Other factors such as changes in temperature, light emission, or gas production may also be used as evidence to confirm an exothermic reaction.

To know more about always refer here

https://brainly.com/question/22647553#

#SPJ11

There are several factors that influence the existence of singular geologic features in the Earth's ocean versus a continental setting, both in terms of physicality and perspective.

Firstly, the physical processes involved in the formation of these features are different in each setting. In the ocean, singular features such as seamounts and oceanic ridges are created through volcanic activity, where magma rises up through the oceanic crust and solidifies to form new rock.

These processes are largely absent in continental settings, where geological features are more commonly formed through tectonic activity such as mountain building, erosion, and sediment deposition.

Another important factor is the perspective from which we view these features. Due to the vast size and depth of the ocean, many singular features can go unnoticed for years or even decades.

This is particularly true for deep ocean features such as the Challenger Deep, which is located in the Mariana Trench and is the deepest known point in the Earth's oceans.

Conversely, singular features in continental settings such as Mauna Kea in Hawaii are often more visible and easily accessible, making them easier to study and understand.

Overall, while there are some similarities in the physical and geological processes that contribute to the formation of singular geologic features in both oceanic and continental settings, there are also significant differences in terms of the specific factors that influence their existence and the perspectives from which they are viewed.

To learn more about ridges, refer below:

https://brainly.com/question/31411869

#SPJ11

Add 10.0 g of calcium chloride to 10.0 g of sodium hydroxide, we will produce 0.0901 moles of calcium hydroxide.

What is Moles?

Moles (mol) is a unit of measurement in chemistry that represents the amount of a substance. One mole of a substance contains the same number of entities, such as atoms, molecules, or ions, as there are atoms in exactly 12 grams of carbon-12.

to calculate the number of moles of calcium chloride present in 10.0 g of the compound. The molar mass of calcium chloride is 111 g/mol, so:

10.0 g Ca[tex]Cl_2[/tex] × (1 mol / 111 g) = 0.0901 mol Ca[tex]Cl_2[/tex]

Similarly, we need to calculate the number of moles of sodium hydroxide present in 10.0 g of the compound. The molar mass of sodium hydroxide is 40 g/mol, so:

10.0 g NaOH × (1 mol / 40 g) = 0.25 mol NaOH

According to the balanced equation, 1 mole of Ca[tex]Cl_2[/tex]reacts with 2 moles of NaOH, so if we have 0.0901 moles of Ca[tex]Cl_2[/tex] and 0.25 moles of NaOH, then the limiting reagent is Ca[tex]Cl_2[/tex]. Therefore, all of the Ca[tex]Cl_2[/tex]will react and the number of moles of products formed will be determined by the amount of Ca[tex]Cl_2[/tex]:

0.0901 mol Ca[tex]Cl_2[/tex] × (1 mol Ca(OH)2 / 1 mol Ca[tex]Cl_2[/tex]) = 0.0901 mol Ca(OH)2

Therefore, if we add 10.0 g of calcium chloride to 10.0 g of sodium hydroxide, we will produce 0.0901 moles of calcium hydroxide.

To know more about  Moles, visit;

https://brainly.com/question/29367909

#SPJ4

This reaction will  produce 0.125 moles of Ca(OH)2

To determine the number of moles of products formed when 10.0 g of calcium chloride (CaCl2) is added to 10.0 g of sodium hydroxide (NaOH), we need to first determine which chemical reaction takes place and the limiting reagent.

The chemical equation for the reaction between calcium chloride and sodium hydroxide is:

CaCl2 + 2 NaOH → Ca(OH)2 + 2 NaCl

From the balanced equation, we can see that 1 mole of calcium chloride reacts with 2 moles of sodium hydroxide to produce 1 mole of calcium hydroxide and 2 moles of sodium chloride.

The molar masses of calcium chloride and sodium hydroxide are:

Using the molar masses, we can convert the masses of calcium chloride and sodium hydroxide to moles:

We can see that there is an excess of sodium hydroxide, so it is the limiting reagent. Using the stoichiometry of the balanced equation, we can determine the number of moles of products formed:

2 moles of NaOH react with 1 mole of CaCl2 to produce 1 mole of Ca(OH)2

Therefore, 0.250 moles of NaOH will react with 0.125 moles of CaCl2 to produce 0.125 moles of Ca(OH)2

Learn more about moles at:

https://brainly.com/question/29367909

#SPJ1

The ph of a 0.150 m benzoic acid solution is 4.20 .Benzoic acid, ch3cooh, is a weak acid with ka = 6.3 10-5.

Benzoic acid is a white, crystalline organic compound that occurs naturally in many fruits and vegetables. It is also produced synthetically, and is used as a food preservative and as a component in many other products. Benzoic acid is used to prevent the growth of certain bacteria and fungi in food, and is generally regarded as safe when used in small amounts.

The equation is pH = pKa + log([A-]/[HA]), where [A-] is the concentration of the conjugate base (in this case, CH3CO2-) and [HA] is the concentrWe can calculate the concentration of H+ in the solution by using the expression Ka = [H+][CH3CO2-]/[CH3COOH]

[H+] = Ka × [CH3COOH]/[CH3CO2-]

[H+] = (6.3 × 10-5)× (0.150 M)/(0.150 M)

[H+] = 6.3 × 10-5 M

The pH of the solution can then be calculated using the expression pH = -log[H+]

pH = -log(6.3 × 10-5)

pH = 4.20

To learn more about Benzoic Acid

https://brainly.com/question/28299797

#SPJ4

Mendeleev's periodic table allows us to predict the chemical properties of elements and their compounds. Let's start with oxides of carbon, which are compounds of carbon and oxygen.

Carbon can form two common oxides: carbon monoxide (CO) and carbon dioxide (CO2). In carbon monoxide, there is one carbon atom and one oxygen atom, so the formula would be written as CO with a subscript of 1 for carbon and a subscript of 1 for oxygen. In carbon dioxide, there is one carbon atom and two oxygen atoms, so the formula would be written as CO2 with a subscript of 1 for carbon and a subscript of 2 for oxygen.

Moving on to aluminum, it also forms oxides. The most common oxide of aluminum is aluminum oxide (Al2O3). In this compound, there are two aluminum atoms and three oxygen atoms. So the formula would be written as Al2O3 with a subscript of 2 for aluminum and a subscript of 3 for oxygen.
For more questions on: elements

https://brainly.com/question/18096867

#SPJ11

To determine the formula of the oxide formed and the percentage by mass of oxygen in the oxide, we need to first calculate the number of moles of Q and O₂ that react, using the given mass of Q and the volume, pressure, and temperature of O₂.

(i) Determining the formula of the oxide:

10.4 g of Q corresponds to 10.4 g / 52.0 g/mol = 0.2 mol of Q

Using the ideal gas law, we can calculate the number of moles of O₂ that reacted:

PV = nRT

n = PV/RT = (100 kPa)(7.48 dm³)/(0.0821 L·atm/(mol·K))(27°C + 273.15) = 0.279 mol of O₂

The balanced chemical equation for the formation of the oxide is:

Q + O₂ → QxOy

Assuming that the number of moles of Q and O₂ react in a simple whole-number ratio, we can use the number of moles of Q and O₂ to determine the empirical formula of the oxide.

Since the number of moles of Q and O₂ react in a 1:1 ratio, the empirical formula of the oxide is QO.

(ii) Calculating the percentage by mass of oxygen in the oxide:

The molar mass of QO is 52.0 g/mol + 16.0 g/mol = 68.0 g/mol

The mass of oxygen in 1 mole of QO is 16.0 g/mol / 68.0 g/mol × 100% = 23.53%

Therefore, the percentage by mass of oxygen in the oxide is 23.53%.

To know more about oxygen refer here

https://brainly.com/question/13905823#

#SPJ11

From the given information, we know that the parents are heterozygous, meaning they have two different alleles for the gene that controls coat color in their offspring. Let's use the following symbols to represent the alleles:

- B: the allele for black coat color

- b: the allele for white coat color

Since the offspring have a 25% chance of being black and a 25% chance of being white, we can assume that the parents are both heterozygous for the gene that controls coat color, which means they both have one B allele and one b allele. This is because:

- To be black, an offspring must inherit a B allele from each parent, so the parents must each have one B allele.

- To be white, an offspring must inherit a b allele from each parent, so the parents must each have one b allele.

The fact that the offspring also have a 50% chance of being speckled indicates that speckling is a result of incomplete dominance or co-dominance, where both alleles are expressed together.

Therefore, we can assume that the speckling phenotype is the result of both the B and b alleles being expressed together, rather than a third, intermediate allele.

In summary, based on the phenotype of their offspring, we can infer that the two parents are both heterozygous for the gene that controls coat color, with one B allele and one b allele each.

To know more about information refer here

https://brainly.com/question/30350623#

#SPJ11

The breaking of the molecular bonds in H₂ and Cl₂ is considered an endothermic step because it requires energy input to break the bonds.

This energy is absorbed from the surroundings in the form of heat. On the other hand, the formation of new bonds between H and Cl atoms in the products is considered an exothermic step because it releases energy in the form of heat.

Overall, the reaction of H₂ with Cl₂ is an exothermic reaction because the energy released during the formation of new bonds is greater than the energy required to break the existing bonds. This means that the reaction releases heat into the surroundings.

To know more about exothermic reaction click on below link:

https://brainly.com/question/29206227#

#SPJ11

When 250.0 g of lead is cooled from 15.0°C to 12.0°C, approximately 29.36 calories of energy (heat) are released.

To calculate the amount of energy (heat) released when 250.0 g of lead is cooled from 15.0°C to 12.0°C, we need to use the specific heat capacity and the change in temperature of lead. The specific heat capacity of lead is 0.128 J/g°C.

The equation to calculate the energy released (Q) is:

Q = m × c × ΔT

where m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

Substituting the given values, we get:

Q = 250.0 g × 0.128 J/g°C × (12.0°C - 15.0°C)

Q = - 122.88 J

The negative sign indicates that energy is being released, as the lead is losing heat. To convert this to calories, we need to divide by the conversion factor of 4.184 J/cal:

Q = - 122.88 J ÷ 4.184 J/cal

Q ≈ - 29.36 cal

Therefore, when 250.0 g of lead is cooled from 15.0°C to 12.0°C, approximately 29.36 calories of energy (heat) are released.

To know more about specific heat capacity  refer to-

https://brainly.com/question/29766819

#SPJ11

The molarity of 0.50 moles of CaCl₂ in 3500 mL of solution is approximately 0.143 M.

To calculate the molarity of 0.50 moles of CaCl₂ in 3500 mL of solution, follow these steps:

1. Convert the volume of the solution from milliliters (mL) to liters (L). There is 1000 mL in 1 L, so divide the given volume by 1000:
  3500 mL ÷ 1000 = 3.5 L

2. Use the formula for molarity (M), which is the number of moles of solute (in this case, CaCl₂) divided by the volume of the solution in liters (L):
  M = moles of solute/volume of solution in L

3. Plug in the values given in the problem: 0.50 moles of CaCl₂ and 3.5 L of solution:
  M = 0.50 moles / 3.5 L

4. Calculate the molarity:
  M ≈ 0.143 M

Learn more about molarity at https://brainly.com/question/30404105

#SPJ11