Answer:31.8 °C
Explanation:
Delta T=?
C= .24 cal/g°C
M=612g
Q=1835
Delta T= 1835 cal/(.24cal/g°C)(612g)=12.50°C
Intial temp= 19.3°C
Add intial temp to new temp
12.50+19.3=31.8°C
What is the molecular formula for Hydrochloric acid
Answer:
HCI
Explanation:
Hope this helps. :))))
Select the correct answer. Samuel adds a teaspoon of salt to a glass of water. He notices that the salt disappears. Samuel takes a sip to discover that the water tastes salty. What kind of change has occurred? OA It's a chemical reaction because a new substance has formed. O B. It's a physical change because the water and the salt kept their original properties. O C. It's an example of synthesis because two substances reacted to give one substance. O D. It's a chemical reaction because the water now tastes salty but originally did not.
HELLLPPPP PLEASEEEEE!!!!!
Answer:
B. It's a physical change because the water and the salt kept their original properties.
Explanation:
Even though it tastes like salty water, the salt is still present, just in smaller molecules. It can be brought back so it is a physical change.
dentify the base in this acid-base reaction:
Upper N a upper O upper H plus upper H upper C l right arrow upper N a upper C l plus upper H subscript 2 upper O.
NaOH
HCl
NaCl
H2O
Answer:
NaOH
Explanation:
Sodium hydroxide is the base in the acid-base reaction as all other acids and sodium chloride is salt and water is neutral.
What is a base?According to the Arrhenius concept, base is defined as a substance which yields hydroxyl ions on dissociation.These ions react with the hydrogen ions of acids to produce salt in an acid-base reaction.
Bases have a pH higher than seven as they yield hydroxyl ions on dissociation.They are soapy in touch and have a bitter taste.According to the Lowry-Bronsted concept, base is defined as a substance which accepts protons .Base react violently with acids to produce salts .Aqueous solutions of bases can be used to conduct electricity .They can also be used as indicators in acid-base titrations.
They are used in the manufacture of soaps,paper, bleaching powder.Calcium hydroxide ,a base is used to clean sulfur dioxide gas while magnesium hydroxide can be used as an antacid to cure acidity.
Learn more about base,here:
https://brainly.com/question/12445440
#SPJ3
true or false : Color Changes are used to show reaction completion
Answer:
True
Explanation:
It means the reaction is occuring.
Question 5 of 10
Which event is an example of vaporization?
A. Perspiration dries on a person's skin.
B. The outside of a glass of ice water becomes moist.
C. Frost forms on a blade of grass.
D. A cloud forms in the sky,
SUBMIT
Answer:
A. Perspiration dries on a person's skin.When the sweat hits the air, the air makes it evaporate (this means it turns from a liquid to a vapor). As the sweat evaporates off your skin, you cool down. Sweat is a great cooling system, but if you're sweating a lot on a hot day or after playing hard you could be losing too much water through your skin.
Explanation:
Hope it is helpful....
2. Pietro decided to travel along the path shown below. How far south did Pietro travel?(The figure
is not drawn to scale.)
Hvad fit
Pro
30 m
CA
24 m
A 6m
B. 38.4 m
C. 36m
D. 18 m
Find the mass of 0.456 mol of Ca(OH)2
Please if you can show the work.
Answer:
Ca(OH)2 molecular weight. Molar mass of Ca(OH)2 = 74.09268 g/mol. This compound is also known as Calcium Hydroxide. Convert grams Ca(OH)2 to moles or moles Ca(OH)2 to grams. Molecular weight calculation: 40.078 + (15.9994 + 1.00794)*2 ››
Hey,
QUESTION)A) Let's first calculate the molar mass M of the molecule :
M(Ca(OH)₂) = M(Ca) + 2M(O) + 2M(H)
M(Ca(OH)₂) = 40 + 2 x 16 + 2 x 1 M(Ca(OH)₂) = 74 g/molB) Let's deduct the corresponding mass m :
m = M x n
m = 74 x 0.456 m = 33.744 g m ≈ 34,0 gThe mass of calcium hydroxide corresponding to this quantity of substance (in mol) is therefore 34 g.
Help e please i give brainlist
Answer:
c
Explanation:
Air mass is a huge body of air which has the same general properties as the land or water over which it forms. *
True
False
Answer:
True
Explanation:
Bc why not? :)
Which solubility curve on the right best represents the data table on the left?
DO NE
Solubility of Sugar in Water
Solubility of Sugar in Water
300
Temperature
(°C)
Sugar Dissolved
(grams)
250
200
0
89
150
Sugar per 100g H20
30
110
100
144
50
60
0
0
90
208
100
20 40 60 80
Temperature (°C)
Answer: Blue curve
Answer:
blue curve on edge :)
Explanation:
Describe the bonding process when two hydrogen atoms combine to
form a diatomic molecule of hydrogen.
Answer:
The electrons located between the two nuclei are bonding electrons. A hydrogen molecule forms from two hydrogen atoms, each with one electron in a 1 s orbital. The two hydrogen atoms are attracted to the same pair of electrons in the covalent bond. The bond is represented either as a pair of dots or as a solid line.
I really can’t do this don’t understand it
Answer:
7.96g, 33.79%
Explanation:
I'll try my best to explain the entire process behind this question ;)
From the question, you can write the reaction
[tex]2H_2O(l)->2H_2(g)+O_2(g)[/tex]
Now, there are a few reasons it is like this. Oxygen is a diatomic element, meaning it doesn't and can't exist as just O. It exists as O₂. To balance, this, double the amount of water and hydrogen so there is an equal amount of each element on both sides of the reaction (4 H's, 2 O's on the reactant side, and 4 H's, 2 O's on the product side).
From this we can get a mole-to-mole ratio.
Onto the stoichiometry. Our goal in this is to convert from grams of water to grams of hydrogen, and we do so with a mole to mole ratio.
[tex]71.0gH_2O*\frac{1molH_2O}{18.02g} *\frac{2molH_2}{2molH_2O}* \frac{2.02g}{1molH_2}\\\\ =7.96gH_2[/tex]
Basically, what I did was divide by water's molar mass to get moles of water, multiplied by the mole-to-mole ratio (2:2) to get moles of H2, and then multiplied by H2's molar mass to get what should be the amount of H2 produced by the reaction.
For percent yield, you can calculate it is such:
[tex]\frac{Actual}{Theoretical}*100[/tex]
Plug the numbers in:
[tex]\frac{2.69g}{7.96g}*100\\\\ =33.79%[/tex]
So, the percent yield is 33.79%
What do YOU think? Is the movement to 100% renewable energy possible? Why, or why not?
Answer:
i dont know
Explanation:
ask your science teacher
The positive and negative ions in an ionic compound create a?
Answer:
crystal structure
Explanation:
three ways how travelers should be considerate towards other travelers when using public transport
The three ways in which travelers should be considerate when using public transport include the following:
Use of headphonesUsing a handkerchief when sneezingNot stepping on people by being aware and vigilantWhat is a Public transport?This is the type of transport which is available to the general public such as trains, buses etc.
It is best to be considerate when using it by applying the following methods mentioned above to prevent disturbance and conflict.
Read more about Public transport here https://brainly.com/question/1299303
Use your understanding of the terms "soluble" and "insoluble" to explain why you must shake a bottle of salad dressing made with oil and vinegar before you use it.
Answer:
See explanation
Explanation:
In chemistry, the idea of "like dissolves like" is of utmost importance. A substance is only soluble in another with which it can effectively interact.
We must note that to be "soluble" means that the solute actually interacts effectively (dissolves) in the solvent.
However, vinegar is a polar substance while oil is a non polar substance hence the two can not effectively interact. That is, the vinegar can not dissolve in oil.
The two will separate into two phases upon standing. Therefore, the bottle of salad dressing made with oil and vinegar must be shaken in order to mix the two thoroughly before it is used.
If we have 4 molecules of sugar, what is the coefficient?
PLZ HELP ME :)
55 POINTS
Answer:
the coefficient is 4
Explanation:
hope this helps
Which is an example of a homoozygous genotype? (There can be more than one answer)
Hh
HH
hh
Answer:
HH and hh
Explanation:
they are the same
Halogens are classified together as a group because all elements -
Are conductors of electricity, , ,
Have the same atomic mass
Have similar chemical & physical properties
Are malleable and ductile
Answer:
sory Idont know Iwish you answer this question
Which of the following elements is the most reactive?
A. Ba
B. Cs
C. Hf
D. Lu
Answer: Cs because its further to the right on the table, meaning its more reactive.
Explanation:
Answer:
Cs
Explanation:
This element is the farthest right, and lowest meaning that its reactivity is very high.
1. valence electrons and electronegativity
2. Both reactivity and electronegativity decrease down a group.
3. Electronegativity decreases down a group and reactivity increases down a group.
4. The number of valence electrons increases from left to right.
5. Cs
{quizlet: captncrun}
WILL MARK BRANLIEST HELP PLEASE
When copper sulfate and zinc metal interact, one atom of zinc replaces one atom of copper while the sulfate, made of 5 atoms, is unchanged. How many atoms are there before and after the interaction?
before: 5 atoms; after: 5 atoms
before: 6 atoms; after: 7 atoms
before: 6 atoms; after: 6 atoms
before: 7 atoms; after: 7 atoms
can someone help me figure out what the Lewis structure for NCl2−?
Answer:
Chlorine is in group 7A, so it has 7 valence electrons
The Lewis structure for the molecule NCl²⁻ with -2 charge is attached in the image below.
What are Lewis structures?Lewis structures are also called as electron dot structures and can be drawn if the molecular formula of a compound is known. It provides information regarding the nature of bond and the position of atoms .
They are also capable of exhibiting the lone pair if any present in a molecule or compound.Lewis defined a base to be an electron pair donor and an acid to be an electron pair acceptor.
They are capable of reflecting electronic structure of elements and even the pairing of electrons . In the diagram, each dot represents an electron while a pair of dots represent a bond between the atoms.It helps in understanding the bonding between the two atoms.
Learn more about Lewis structures,here:
https://brainly.com/question/20300458
#SPJ5
What is the relationship between radioactive decay and radiometric dating?
Answer:
Radiometric dating, is called radioactive dating, is a technique used to determine the age of materials such as rocks. It is based on a comparison between the observed abundance of a naturally occurring radioactive isotope and its decay products, using known decay rates.
Explanation:
:)
El ácido sulfúrico H2SO4 es uno de los compuestos que se utiliza para la producción de fertilizantes como el nitrosulfato amónico. Si disponemos de 8 mL de H2SO4 al 37 %P/P (d=1,26 g /mL), los cuales se disolvieron hasta alcanzar un volumen de solución de 400 mL, con una densidad de 1,08 g/mL. (La densidad del soluto es corresponde a 1,83 g/cm³)
Explanation:
12 hours ago
El ácido sulfúrico H2SO4 es uno de los compuestos que se utiliza para la producción de fertilizantes como el nitrosulfato amónico. Si disponemos de 8 mL de H2SO4 al 37 %P/P (d=1,26 g /mL), los cuales se disolvieron hasta alcanzar un volumen de solución de 400 mL, con una densidad de 1,08 g/mL. (La densidad del soluto es corresponde a 1,83 g/cm³)
determine the velocity. a runner completes a 10km race in 33.6 minutes
Answer:
17.86km/hr
Explanation:
Speed or velocity is calculated using the formula:
Speed (v) = distance (d) ÷ time (t)
According to the information given in this question;
Distance = 10km
Time = 33.6minutes = 33.6/60 = 0.56hours
Speed/velocity = 10/0.56
= 17.857
= 17.86km/hr
Answer:
0.297619048
Explanation:
distance= 10 km
time= 33.6 min
10/33.6
v= 0.297619048
or 0.29
which bond type involves the sharing of valence electrons?
NEED HELP ASAP PLEASE!!!!
Answer:
Covalent Bond
Explanation:
A covalent bond involves electrons being shared between atoms. The most stable state for an atom occurs when its valence electron shell is full, so atoms form covalent bonds, sharing their valence electrons, so that they achieve a more stable state by filling their valence electron shell.
In a water molecule, what type of bond forms between the oxygen and hydrogen atoms
The scatterplot shows the number of visitors at an art show in relation to admission price. What does point A on the scatterplot represent?
A. When the ticket price was $120, a total of 15 people visited the art show.
B. When the ticket price was $15, a total of 180 people visited the art show.
C. When the ticket price was $180, a total of 15 people visited the art show.
D.When the ticket price was $15, a total of 120 people visited the art show.
PLZ ANSWER AND ILL MARK YOU THE BRANLIEST
When the ticket price was $15, a total of 180 people visited the art show as it denotes a point with most accuracy.
What is accuracy?Accuracy in terms of chemistry can be defined as to how close a measurement is to the true value.There are three types of accuracy:
1) Point accuracy-It means accuracy is present at that point of scale only.It does not give any information about the accuracy of the instrument.
2)Percentage of true value--It is the accuracy which is determined by identifying accuracy of the instrument and comparing it with the measured true value.
3)Percentage of scale range- It is the accuracy which determines accuracy of the measurement.
Accuracy of percentage of scale range type as the measurements are to be made within a range where the sample has to be measured.
Accuracy in case of instruments is neglected up to ±0.5 percent.
Learn more about accuracy,here:
https://brainly.com/question/13099041
#SPJ6
SeS3 covalent compound name?
Answer:
Selenium trisulfide
NEEED HELP PLEASE IM VERY STRESSED
Answer:
C) It moves faster and collects more data
Explanation:
