Answer: the electrostatic potential energy is -3.26 × 10⁻¹⁸ J
Explanation:
Given the data in the question;
I think the value of electrostatic potential energy of calcium sulfide CaS formed will be less(more negative) than KCl because the Ca2+ and S2- ions has more charge that is +2 and -2 respectively when compared to Kcl which has +1 and -1 charge.so it will be more negative.
radius = r[tex]_{ca+2}[/tex] + r[tex]_{s-2}[/tex] = 100 + 184 = 284 pm = 2.84 × 10⁻¹⁰ m
we know that; k = 2.31 × 10⁻²⁸ J
q1 = 2 ( charge on Ca⁺² )
q2 = -2( charge on S⁻²)
so
Ep = k × q1q2/r
so we substitute
Ep = 2.31 × 10⁻²⁸ × (+2×-2) / 2.84 × 10⁻¹⁰
Ep = (2.31 × 10⁻²⁸ × -4) / 2.84 × 10⁻¹⁰
Ep = -9.24 × 10⁻²⁸ / 2.84 × 10⁻¹⁰
Ep = -3.26 × 10⁻¹⁸ J
Therefore, the electrostatic potential energy is -3.26 × 10⁻¹⁸ J
Based on the data provided, the electrostatic potential energy is -3.26 × 10⁻¹⁸ J
What is electrostatic potential energy?The electrostatic potential energy is the work done in moving the charge from infinity to that point against the electric field.
The electrostatic potential energy between any two charges q1, q2 separated by distance r is derived from Coulomb’s law and mathematically given as:
E = k × [q1q2/r2]where
k is a constant = 2.31 × 10⁻²⁸ Jq1 and q2 are the chargesr is the distance of separationFrom the data provided:
ionic radii of Ca2+ r1 = 100 pm
ionic radii of S2– = 184 pm.
Chargeon Ca2+ = +2
Charge on S2_ = -2
From the data above, it most likely that the value of electrostatic potential energy of calcium sulfide CaS formed will be less(more negative) than KCl because the Ca2+ and S2- ions has a greater charge of +2 and -2 respectively compared to Kcl which has +1 and -1 charge.
Calculating the electrostatic potential energy, Ep:
radius = r1 + r2 = 100 + 184 = 284 pm
r = 2.84 × 10⁻¹⁰ m
k = 2.31 × 10⁻²⁸ J
q1 = 2 ( charge on Ca⁺² )
q2 = -2( charge on S⁻²)
Then:
Ep = k × q1q2/r
Substituting the values above in the equation:
Ep = 2.31 × 10⁻²⁸ × (+2 ×-2) / 2.84 × 10⁻¹⁰
Ep = (2.31 × 10⁻²⁸ × -4) / 2.84 × 10⁻¹⁰
Ep = -9.24 × 10⁻²⁸ / 2.84 × 10⁻¹⁰
Ep = -3.26 × 10⁻¹⁸ J
Therefore, the electrostatic potential energy is -3.26 × 10⁻¹⁸ J.
Learn more about electrostatic potential energy at: https://brainly.com/question/24648428
Describe how moving the mountain lions could affect the ecosystem
Answer:
If Mountain lions are removed from a habitat/ecosystem, their prey will overpopulate, which may lead to extinctions on the pray of the secondary consumers. ex. A mountain lion would eat rabbits who eat berries, if there are no mountain lions to kill the rabbits, then the berries may be scarce
Explanation:
bc i know everthing
59. Which one has 0 dipole moment?
a. H2O2 b. Co2 c. HF
d. HBr
Answer:
the answer to this question is A H202
I'LL MARK YOU BRAINLIEST! Please help me balance these chemical reactions. (I'M NOT IN COLLEGE, I'M IN 10TH GRADE) Please help me
Answer:
1. H2 + Cl2 => 2HCl
2. Na2S + 2HCl => 2NaCl + H2S
3. 6HCl + 2Al => 2AlCl3 + 3H2
4. C3H8 + 5O2 => 3CO2 + 4H2O
5. C6H12O6 + 6O2 => 6CO2 + 6H2O
6. 4C12H23O11 + 49O2 => 48CO2 + 46H2O
7. 4NH3 + 7O2 => 4NO2 + 6H2O
8. 2Mg + 02 => 2MgO
hope it helps
The percentage by mass of oxygen in a compound containing potassium, chlorine, and oxygen was determined experimentally. The technique used follows. solid (KClo compound is weighed. Then it is heated in a crucible. The The solid decomposes to produce oxygen gas and a salt. Because the oxygen escaping, mass of the original solid decreases. From the mass of oxygen lost and mass is the the percentage by mass of oxygen in of the original the original compound is determined. KClyo. (s) salt (s) O (g A student performs five trials and determines the following by mass of oxygen in the compound (KCLO) by mass of oxygen Trial in the compound 38.933 38,940 38,892 38.900
a. Determine the average experimental percentage oxygen in the compound. by mass of 30.933
b. If the actual value of the percentage by mass ofoxygen in this compound is 39.13 determine the percentage error.
Answer:
See explanation
Explanation:
The percentage by mass of oxygen is defined as;
Mass of oxygen/ molar mass of the compound * 100/1
The average percentage by mass of oxygen = 38.933 + 38.940 + 38.871 + 38.892 + 38.900/5
The average percentage by mass of oxygen = 38.907
Percentage Error = (|accepted value – experimental value| \ accepted value) x 100%
Percentage Error = 39.13 - 38.907 / 39.13 * 100
Percentage Error = 0.57%
A small, rocky island is home to a community of organisms. They include birds,
insects, lichen, moss, shrubs, and small plants. Flooding during a storm damages the
ecosystem, except for the lichen and moss.
Two students observe the changes to the island community during and after the
storm. Chandra classifies the changes as primary succession, whereas Brenda
classifies them as secondary succession. Which argument is supported by the
evidence?
Brenda argument is supported.
Here moss and lichens are still there after the flood which will recolonize the colony once there.
What is primary successionPrimary succession is ecological succession that begins in essentially lifeless areas, such as regions in which there is no soil or where the soil is incapable of sustaining life.
What is secondary succession?It is a type of ecological succession in which plants and animals recolonize a habitat after a major disturbance such as a devastating flood, wildfire, landslide, lava flow, flood or human activity.
To know more about ecological succession here
https://brainly.com/question/12325701
#SPJ2
In a reaction that produces carbon dioxide, the theoretical yield is 59 grams. During the experiment, the reaction actually produced 52.9 grams of carbon dioxide. Determine the percent yield.
Answer:
mole ratio, which is equivalent to a 1;1 mole ratio, to a gram ratio. This means that when the reaction consumes 84.03 g of carbon monoxide, it should theoretically produce 132.03 g of carbon dioxide. Use this gram ratio to calculate the theoretical yield for your reaction.
Explanation:
How many moles of potassium sulfate are present in a sample that weighs 45.8g?
I do not understand how to solve this please help
Answer:
0.263 mol
Explanation:
K2SO4 - potassium sulfate
Molar mass (K2SO4) = 2*39.0983 + 32.065 + 4*15.9994 =
= 174.2592≈174.26 g/mol
45.8 g * 1 mol/174.26 g = 0.263 mol
Find the mass of 2.40 moles of CO. gas..
Learning Task 4: Think of two animals that reproduce sexually. In the first
box, draw an animal that fertilization occurs inside the body. In the second
box, draw an animal that exhibits external fertilization.
please help for me
In the first box, you should draw a chicken. In the second box, you should draw a cow or a horse.
I hope it helps you!!!! :D
[ pls mark me brainliest i need one more to rank up tysm if u do ]
Ethane is a hydrocarbon with a formula of C2H6 . How many Carbon and Hydrogen atoms are contained within 3 molecules of ethane ?
Answer:
Within three molecules of Ethane, it would have 6 carbon, and 18 hydrogen atoms in it.
Explanation:
A tank contains 10 liters of pure water. A solution of an unknown, but constant concentration of salt is flowing in at 0.5 liters per minute. The water is mixed well and drained at 1 liter per minute. After 20 minutes there are 10 grams of salt in the tank. (i) Give an adequate mathematical model for this scenario. Explain what each of your variables means. (ii) What is the concentration of the incoming salt solution
Answer:
i) ∴∫[tex]\frac{dA}{A}[/tex] = ∫ [tex]\frac{-1}{10} dt[/tex] ------ ( 1 )
ii) C = 4.303
Explanation:
Given data:
water in tank = 10 liters
concentration of salt flowing in = 0.5 liters/min
10 grams of salt is left in tank after 20 minutes
mixed water is drained at 1 liter per minute
i) Adequate mathematical model for the scenario
lets assume ; A( t ) amount of salt after t minute
A( t ) = 10grams where t = 20 minutes
differentiate A(t)
dA / dt = ( rate in ) - ( rate out )
= 0.5 * 0 - A/10
∴∫[tex]\frac{dA}{A}[/tex] = ∫ [tex]\frac{-1}{10} dt[/tex] ------ ( 1 )
ii) hence; In A = [tex]\frac{-1}{10} t + C[/tex] ----- ( 2 )
at t = 20 , A = 10grams
find C = In 10 + 2
= 2.303 + 2 = 4.303
back to ( 2 )
In A = [tex]\frac{-t}{10} + 4.303[/tex]
∴ A = e [tex]\frac{-t}{10} + 4.303[/tex]
A sample of 0.600 mol of a metal M reacts completely with excess fluorine to form 46.8 g of MF2.?
a) How many moles of F are in the sample of MF2 that forms? (1.20 mol F)
b) How many grams of M are in this sample of MF2?
c) What element is represented by the symbol M? (Ca)
Answer:
See Explanation
Explanation:
Given:
moles M = 0.600 mole
moles F = excess (for rxn stoichiometry)
Formula Weight (F.Wt.) of F = 19 grams/mole (from Periodic Table)
Yield in grams = 46.8 grams (assuming theoritical yield)
Rxn: M + F₂ => MF₂
0.600mol Excess 0.600mol (1:1 rxn ratio for M:MF₂)
a. moles of F in MF₂ = 2(0.600) moles F = 1.2 moles F
b. mole weight MF₂ = 46.8g/0.600mol = 78g/mole
F.Wt. MF₂ = F.Wt. M + 2(F.Wt. F)
=> mass M = F.Wt. M = [F.Wt. MF₂ - 2(F.Wt. F)] = 78g/mol. - 2(19g/mol.)
= (78 - 38) grams/mole = 40 grams/mole
c. Calcium (Ca) has F.Wt. = 40 grams/mole (compared to Calcium on Periodic Table.
From the question, the metal is the limiting reactant and must be used to obtain the required results which are;
a) There are 1.20 mol F in MF2.
b) There are 40g of M in MF2.
c) M is calcium.
From the reaction equation;
M + F2 ----> MF2
Since the reaction is 1:1, 0.600 mol of MF2 is formed
Note that 1 mole of MF2 contains two moles of F and one mole of M
Hence, number of moles of F in MF2 = 2 * 0.600 mol = 1.20 mol F
Since 1 mole of M is contained in MF2, there are 0.600 moles of M in MF2.
If 1 mol of M forms 1 mole of MF2
And, 0.600 mol of M form 0.600 mol of MF2
Number of moles of MF2 = mass/molar mass
Number of moles of MF2 = 0.600 mol
Mass of MF2 formed = 46.8 g
Molar mass of MF2 = mass/Number of moles of MF2
Molar mass of MF2 = 46.8 g/0.600 mol
Molar mass of MF2 = 78 g/mol
Molar mass = Sum of Relative atomic mass of component atoms.
Hence;
78 = M + 2(19)
M = 78 - 2(19)
M = 40 g
The element must be calcium
Learn more: https://brainly.com/question/17275626
Which one of these situations would have higher density water? Water with a lower salt content Water at the equator Water near where a river enters the ocean Lower temperature water
A higher density water will be obtained in lower temperature water.
What is density?Density is the fluid property that describes the amount of solutes that dissolves in a given volume of the fluid.
Density of a fluid is calculated by taking the ratio of mass to volume of the fluid.
[tex]\rho = \frac{m}{v}[/tex]
When the temperature of the water is low, more mass of the water is obtained while a high temperature evaporates the liquid.
Thus, a higher density water will be obtained in lower temperature water.
Learn more about density of water here: https://brainly.com/question/16794306
How are stars and comets different?
A. A star has a solid rock and gas surface, while a comet has tail of dust and gas.
B. A star has a tail of dust and gas, while a comet has a solid rock surface.
C. A star is made up of burning gases, while a comet is made up of ice, gases, rocks, and dust.
D. A star is made up of ice, rocks, and dust, while a comet is made up of burning gases.
Many homes that are not
connected to public sanitary
sewers might dispose of
sewage using a(n)
Answer:
pump that is the answer hope its right
. Which state of matter has a defined volume but no defined shape?
HELPPPP PLEASE FAST
Answer:
liquid
Explanation:
it's not plasma, solid, or gas
so I think liquid
When a chemical reaction is run in aqueous solution inside a calorimeter, the temperature change of the water (and Ccal) can be used to calculate the enthalpy change for the reaction. Here, we will study the reaction of hydrochloric acid with sodium hydroxide in the calorimeter from problem 3. Equal volumes (50.0 mL) of 1.00 M sodium hydroxide and 1.00 M hydrochloric acid are mixed.
HCl+NaOH→NaCl+H2O
1. What is the total change in enthalpy (in Joules) for the reaction?
2. Where initial temperature is 21.2 °C and final temperature is 28.0 °C. Ccal is 1234.28 j
Answer:
The total change in enthalpy for the reaction is - 81533.6 J/mol
Explanation:
Given the data in the question;
Reaction;
HCl + NaOH → NaCl + H₂O
Where initial temperature is 21.2 °C and final temperature is 28.0 °C. Ccal is 1234.28 J
Moles of NaOH = 50.mL × 1.00 M = 50.0 mmol = 0.0500 mol
Moles of HCl = 50.mL × 1.00 M = 50.0 mmol = 0.0500 mol
so, 0.0500 moles of H₂O produced
Volume of solution = 50.mL + 50.mL = 100.0 mL
Mass of solution m = volume × density = 100.0mL × 1.0 g/mL = 100 g
now ,
Heat energy of Solution q= (mass × specific heat capacity × temp Δ) + Cal
we know that; The specific heat of water(H₂O) is 4.18 J/g°C.
so we substitute
q_soln = (100g × 4.18 × ( 28.0 °C - 21.2 °C) ) + 1234.28
q_soln = 2842.4 + 1234.28
q_soln = 4076.68 J
Enthalpy change for the neutralization is ΔH[tex]_{neutralization}[/tex]
ΔH[tex]_{neutralization}[/tex] = -q_soln / mole of water produced
so we substitute
ΔH[tex]_{neutralization}[/tex] = -( 4076.68 J ) / 0.0500 mol
ΔH[tex]_{neutralization}[/tex] = - 81533.6 J/mol
Therefore, the total change in enthalpy for the reaction is - 81533.6 J/mol
You and your family are on vacation in the mountains. You are trying to locate the campsite where you will be staying but you cannot get a signal. What is one reason why your GPS is not responding.
Answer:
A satellite may be malfunctioning.
Line of sight may be blocked.
low batteries in your GPS.
If a sample contains 70.0 % of the R enantiomer and 30.0 % of the S enantiomer, what is the enantiomeric excess of the mixture?
Answer:
the enantiomeric excess of the mixture is 40%
Explanation:
The computation of the enantiomeric excess of the mixture is shown below:
As we know that
[tex]= |\frac{R - S}{R + S} |\times 100\\\\= |\frac{70 - 30}{70 + 30}| \times 100\\\\= 40\%[/tex]
Hence, the enantiomeric excess of the mixture is 40%
A liquid is a substance ______
A balloon has been filled to a volume of 1.90 L with 0.2 mol of helium gas. If I add helium until
0.6 mol of helium is in the balloon, what is the new volume of the balloon?
0.63 L
5.7 L
15.8 L
0.06 L
Answer:0
.63
Explanation:
Scientists classify rocks mainly according to which feature?
their color
how they form
their hardness
where they are found
Please help me I need this really quick
Answer:
The answer is (a)
.
.
......................................................................
can someone please help me asap ill mark u brainlest
Answer:It is the ground state of NA
How many moles of MgCl2 can be made from 10 moles of Cl2?
_Mg + _Cl2 -->_MgCl2
(A) 10 moles MgCl2
(B) 11 moles MgCl2
(C) 8 moles MgCl
(D) 15moles MgCl
A hormone can have different effects in different species?
A. True
B. False
C. Cannot be decided
Answer:
true
Explanation:
it is because hormone determines various factors
Suppose that the power
used by a light bulb in a circuit is 16 W, and the bulb has a resistance of 4 ohms.
Calculate the current (in amps) flowing through it.
La fórmula molecular del pentano y del nonano son
Nose jajajajajaj si mr ayudas te ayudo
What is the pH of a solution with a H+ ion of 2×10-¹²?
Answer:
11.7
Explanation:
The pH is the negative logarithm of the concentration of H+ ions. If the concentration is 2×10-¹² the the pH will be -log(2×10-¹²) which is 11.698 which can be round up to 11.7.
How does a lithium atom form the most stable ion?
Answer:
im absoulutely positive it is C
