what is the electron geometry of xef2? answer unselected trigonal planar unselected trigonal bipyramidal unselected linear unselected bent unselected i don't k

When water freezes, its particles slow down and come closer together, resulting in a decrease in entropy.

Entropy is a measure of the disorder of a system. In other words, when a system has a higher degree of disorder, it has a higher entropy. When a liquid such as water freezes, its particles slow down and come closer together to form a more ordered and rigid structure. The particles arrange themselves into a crystalline structure in which they are more tightly packed, resulting in a decrease in the system's disorder and entropy.

The entropy of water in the liquid state is higher than that of water in the solid state because liquid particles are more disordered and free to move about. Therefore, when water freezes, its entropy decreases due to the decrease in disorder caused by the decrease in the freedom of motion of its particles.

Learn more about entropy here:

https://brainly.com/question/32167470

#SPJ11

The group of refrigerant used in blends to enhance oil return, usually at 3% or less of the blend is the hydrocarbons refrigerants. They are used in blends to enhance oil return in order to avoid system breakdowns due to oil depletion.

Hydrocarbons refrigerants are frequently used in blends to enhance oil return in refrigeration and air conditioning systems. This is done in order to avoid system breakdowns caused by oil depletion. In addition, hydrocarbons have excellent heat transfer characteristics and are more efficient than most other refrigerants. They are also more environmentally friendly than other refrigerants.

These refrigerants are non-toxic and non-corrosive and they have a lower global warming potential. Because of this, hydrocarbons are being used more frequently in refrigeration and air conditioning systems. These refrigerants have been used as drop-in replacements for R12, R22, and R502. They are also used in new installations.

Learn more about refrigerants here:

https://brainly.com/question/29496090

#SPJ11

In a nuclear fission reaction, a Californium (Cf) atom undergoes a process where it splits into two smaller atoms, releasing a significant amount of energy in the process.

To complete the equation, we need to identify the two resulting atoms and their atomic numbers.Given that Californium (Cf) has an atomic number of 98, the equation can be represented as follows:

^252Cf → ^114Pd + ^Tc43

Here, ^252Cf represents a Californium atom with a mass number of 252. The arrow indicates the fission reaction, and the two products are ^114Pd (Palladium) and ^Tc43 (Technetium). The atomic number of Palladium is 46, represented as Pd, while Technetium has an atomic number of 43, represented as Tc.During the fission process, several neutrons are also released, but they are not represented in the given equation.

These neutrons can initiate a chain reaction by colliding with other Cf atoms and causing further fission reactions, leading to the release of more energy.Overall, the equation represents the nuclear fission of Californium, resulting in the formation of Palladium and Technetium atoms, along with the release of energy.

for such more questions on nuclear

https://brainly.com/question/1420545

#SPJ8

If only hexane was used as the eluent in a chromatographic separation, it would have limited effectiveness in separating compounds based on their polarity.

Hexane is a nonpolar solvent and has low polarity. As a result, it would have a weak interaction with polar compounds, making it less effective in eluting them from the stationary phase. Chromatography relies on the differential affinity of compounds for the stationary and mobile phases to achieve separation. In a mixture containing both polar and nonpolar compounds, hexane would predominantly interact with nonpolar compounds, while polar compounds would have a stronger affinity for the stationary phase. Consequently, the polar compounds would be retained on the stationary phase and not eluted effectively by the hexane eluent.

Using only hexane as the eluent would likely result in poor resolution and overlapping peaks in the chromatogram, making it difficult to distinguish and quantify individual compounds. To improve separation, a more polar eluent or a gradient elution method could be employed to increase the interaction between the eluent and polar compounds and enhance their elution from the stationary phase.

for more questions on hexane
https://brainly.com/question/9630611
#SPJ8

An aqueous solution of the salt formed by combining NH, (K = 1.8 x 105) and CH, COOH (K = 1.8 x 105) would be neutral.

When a salt is formed by combining NH4+ and CH3COO–, an aqueous solution of this salt would be neutral. Both the salt’s conjugate acid and base are weak, with almost the same dissociation constant, resulting in a pH near neutral. When the acid and base are weak, the equilibrium constant Ka or Kb is typically used to assess acidity or basicity.

The ionic product of the salt and water reaction determines the acidity or basicity of a salt’s aqueous solution. NH4+ is a conjugate acid of a weak base, NH3, and CH3COO- is a conjugate base of a weak acid, CH3COOH. Both are weak acids or bases, therefore, their respective dissociation constants are close to equal. This results in a salt that has no significant acidic or basic character when dissolved in water.

Hence, the aqueous solution of the salt would be neutral.

Learn more about dissociation constant here:

https://brainly.com/question/31386094

#SPJ11

The statement that is NOT true of both ATP (adenosine triphosphate) and cAMP (cyclic adenosine monophosphate) is They both have the same number of carbon atoms.option d.

ATP is a nucleotide composed of three phosphate groups, a ribose sugar, and an adenine base. It contains 5 carbon atoms in its ribose sugar, making it a pentose sugar. Additionally, ATP has a purine base (adenine) that consists of two fused ring structures.On the other hand, cAMP is a derivative of ATP in which one of the phosphate groups is removed, resulting in a cyclic structure. cAMP retains the adenine base and the ribose sugar found in ATP. However, unlike ATP, cAMP lacks two of the phosphate groups and instead forms a cyclic structure by linking the 3' and 5' positions of the ribose sugar. This cyclic structure gives cAMP its name.Therefore, while both ATP and cAMP share the presence of phosphorus, adenine, and ribose, they differ in terms of the number of ring structures and carbon atoms. ATP has two ring structures and 5 carbon atoms in its ribose sugar, while cAMP has one ring structure due to its cyclic nature and also 5 carbon atoms in its ribose sugar. Hence, the correct answer is d. They both have the same number of carbon atoms.option d.

for such more questions on carbon

https://brainly.com/question/29352532

#SPJ8

Prefixes are required for binary covalent compounds to specify the number of atoms of each element present. Ionic compounds are made up of ions, not individual atoms.

Prefixes are necessary to indicate the number of atoms of each element present in binary covalent compounds, which are typically composed of two nonmetals. For instance, di- is used for two atoms of a specific element, and tri- is used for three. Since these molecules are discrete, each element has a specific number of atoms present, necessitating the use of prefixes to indicate this number.

Ionic compounds, on the other hand, are made up of ions rather than individual atoms, and they are typically composed of a metal and a nonmetal. These ions are already present in the appropriate proportion to create a stable compound, with the metal ion losing electrons and the nonmetal ion gaining electrons. Therefore, prefixes are not necessary since the charges of the ions must cancel each other out in order to create a stable ionic compound.

Learn more about ionic compound here:

https://brainly.com/question/30420333

#SPJ11

The species would be an anuran (an amphibian)

We need to answer this in English.

Here we want to find "A species that mates on the surface and then deposits its eggs in the water to be surrounded by sperm"

This would be known as a species of amphibian called an anuran, specifically a frog or toad.

Frogs and toads belong to the order Anura and have a characteristic reproductive cycle that involves external fertilization. During reproduction, the male releases his sperm into the water, and the female deposits her eggs in the water as well. The eggs are externally fertilized by sperm that swim around them. This process is known as external or external fertilization.

Learn more about eggs:

https://brainly.com/question/1151355

#SPJ1

Answer:

0.004214 moles

Explanation:

0.004214 moles of HCL per following takes one mole of HCl to neutralize one mole of NaOH;1) Moles/ml for 0.14 M NaOH: 0.14/1…

For acetic acid that has a specific gravity of 1.040 at 30.0 °C and a density of 0.9956 g/ml at that temperature for water, then the density of acetic acid at that temperature is 1.0354 .

The material's specific gravity is calculated by dividing its density by that of a standard substance.

specific gravity (SG) = density of substance /density of reference substance

given,

Density of reference substance i.e. water = 0.9956 g/ml

The specific gravity of acetic acid = 1.040

Density of substance = specific gravity (SG) × density of reference

                                                                                            substance

Thus ,the density of acetic acid can be given by

Density of acetic acid = specific gravity (SG) × density of water

                                    = 1.040 × 0.9956

                                    = 1.0354 g/ml

Therefore, density of acetic acid at 30.0 is 1.0354 g/ml

Learn more about specific gravity here ,

https://brainly.com/question/31485690?

The balanced chemical equation for the reaction between sodium and oxygen to form sodium oxide is: 4Na + O2 → 2Na2O According to the balanced equation, 4 moles of sodium react with 1 mole of oxygen to produce 2 moles of sodium oxide.

Therefore, the stoichiometric ratio is 4:1:2 (sodium:oxygen:sodium oxide). If you have 8 moles of sodium, you can use the stoichiometry to determine the amount of sodium oxide produced. Since the ratio of sodium to sodium oxide is 4:2, you would expect to produce half the number of moles of sodium oxide compared to the moles of sodium. Therefore, with 8 moles of sodium, you would expect to produce 4 moles of sodium oxide.

Learn more about stoichiometric ratio here: brainly.com/question/29093629

#SPJ11

When self-aldol condensation occurs, it results in a β-hydroxy ketone. This β-hydroxy ketone undergoes dehydration in the presence of acid or heat to give an α,β-unsaturated ketone. The unsaturated ketone formed depends on the position of the water molecule that is eliminated during the dehydration process.The correct option among the alternatives is b) 4-methyl-4-penten-2-one.

In an aldol condensation reaction, a ketone or aldehyde acts as both the electrophile and nucleophile, and the product is a β-hydroxy ketone. When this β-hydroxy ketone is heated or treated with acid, it undergoes dehydration to form an α,β-unsaturated ketone.

Due to this, the products resulting from the dehydration of a self-aldol condensation product depend on the position of the water molecule that is eliminated during dehydration. This can be understood with the help of the given options. In option (a), water is eliminated from the α-carbon and the β-carbon, resulting in the formation of a conjugated diene that has four carbon atoms.

The conjugated diene is 4-methyl-3-penten-2-one.In option (b), water is eliminated from the β-carbon and the γ-carbon, resulting in the formation of a conjugated diene that has five carbon atoms. The conjugated diene is 4-methyl-4-penten-2-one.In option (c), water is eliminated from the α-carbon and the γ-carbon, resulting in the formation of a conjugated diene that has six carbon atoms. The conjugated diene is 4-methyl-5-hexen-2-one.

To learn more about condensation  visit;

https://brainly.com/question/1287204

#SPJ11

To determine the amount of water produced when reacting 3 moles of hydrogen (H2) with 3 moles of oxygen (O2), we need to consider the balanced chemical equation:

2 H2(g) + O2(g) → 2 H2O(g)

From the balanced equation, we can see that for every 2 moles of hydrogen reacted, we obtain 2 moles of water. Therefore, if we have 3 moles of hydrogen, we would expect to produce 3 moles of water. Next, we need to convert moles of water to grams. The molar mass of water (H2O) is approximately 18.015 g/mol.

Using the conversion factor: 3 moles H2O * (18.015 g/mol) = 54.045 g

Therefore, if we react 3 moles of hydrogen with 3 moles of oxygen, we would expect to produce approximately 54.045 grams of water. However, none of the given options (a, b, c, d) match the calculated value.

Learn more about conversion factor here: brainly.com/question/30390574

#SPJ11

The maximum wavelength of light for which a nitrogen-nitrogen single bond could be broken by absorbing a single photon is 729 nm.

The maximum wavelength of light for which a nitrogen-nitrogen single bond could be broken by absorbing a single photon can be calculated using the equation E = hc/λwhere E is the energy of a single photon, h is Planck's constant (6.626 x 10^-34 J s), c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength of the light.

Rearranging the equation to solve for λ, we get:λ = hc/E, where E is the energy required to break the nitrogen-nitrogen single bond, which is given as 163 kJ/mol.To convert this to energy per photon, we need to divide by Avogadro's number (6.022 x 10^23 mol^-1):163 kJ/mol / (6.022 x 10^23 mol^-1) = 2.71 x 10^-19 J/photon

Substituting the values into the equation for λ:λ = hc/Eλ = (6.626 x 10^-34 J s)(2.998 x 10^8 m/s) / (2.71 x 10^-19 J/photon)λ = 7.29 x 10^-7 m or 729 nm (rounded to 3 significant digits)

Therefore, the maximum wavelength of light for which a nitrogen-nitrogen single bond could be broken by absorbing a single photon is 729 nm.

To learn more about wavelength visit;

https://brainly.com/question/31143857

#SPJ11

In the operon model, if there is a gene (knock out) mutation in the lacI gene in the presence of lactose, the following events would occur: Constitutive expression of the lac operon and Continuous production of β-galactosidase and lactose permease. (Option 1 and 2).

1. Constitutive expression of the lac operon: The lacI gene normally encodes for the lac repressor protein, which binds to the operator region and prevents the transcription of the lac operon genes in the absence of lactose. A mutation in the lacI gene would result in the loss or dysfunction of the lac repressor protein, leading to the constitutive expression of the lac operon genes, regardless of the presence of lactose.

2. Continuous production of β-galactosidase and lactose permease: The lac operon genes, including the lacZ gene encoding β-galactosidase and the lacY gene encoding lactose permease, would be continuously transcribed and translated in the absence of regulation by the lac repressor protein. This would result in the continuous production of these enzymes, allowing the metabolism of lactose even in its presence.

Therefore, the correct options are:

The correct question is:

In the presence of lactose, what would occur in the operon model if there is a gene (knock out) mutation in lacl? click all that apply.

To know more about operon model, follow the link:

https://brainly.com/question/14160749

#SPJ4

The number of ATPs produced directly as a result of one turn of the citric acid cycle is 1 ATP.

During the citric acid cycle, also known as the Krebs cycle or the tricarboxylic acid (TCA) cycle, a series of reactions occur to extract energy from glucose and generate electron carriers, such as NADH and FADH2. These electron carriers go on to participate in oxidative phosphorylation in the electron transport chain, leading to the production of ATP. However, in terms of direct ATP production within the citric acid cycle itself, only one ATP molecule is formed through substrate-level phosphorylation.

This occurs in the reaction catalyzed by succinyl-CoA synthetase, where succinyl-CoA is converted into succinate. In this step, a high-energy phosphate bond is formed and transferred to ADP, resulting in the production of one molecule of ATP. The other energy-rich molecules generated in the citric acid cycle, such as NADH and FADH2, carry their energy to the electron transport chain, where a much larger amount of ATP is generated through oxidative phosphorylation. Therefore, while the citric acid cycle indirectly contributes to ATP production, only one ATP molecule is produced directly within the cycle itself.

Learn more about oxidative phosphorylation here: brainly.com/question/30278433

#SPJ11

When ethane (C2H6) dissolves in water (H2O), there are two main enthalpy changes involved: the enthalpy of solvation and the enthalpy of solution.

The enthalpy of solvation refers to the energy change when individual molecules of ethane are surrounded by water molecules to form solvated ethane species. This process involves breaking the intermolecular forces within the ethane and water molecules and forming new intermolecular forces between the solute and solvent molecules. The enthalpy of solvation can be either exothermic or endothermic, depending on the nature of the intermolecular interactions between ethane and water. The enthalpy of solution, on the other hand, represents the overall energy change when the ethane molecules are completely dissolved in water. It includes the enthalpy of solvation as well as any additional energy changes associated with mixing and the formation of a homogeneous solution. The specific enthalpy changes during the dissolving of ethane into water would depend on the experimental conditions and the concentrations of the solutions involved.

for more questions on enthalpy
https://brainly.com/question/14047927
#SPJ8

The volume would be 25.94 L if the temperature adjusted to 0.4 degrees Celsius. This means that the latex balloon would decrease in volume when it is cooled down by 0.4 degrees Celsius from the initial temperature of 18.1 degrees Celsius.

A latex balloon will adjust to maintain the same pressure. If the balloon is filled with 27.6 L of helium initially at 18.1 degrees Celsius, the volume would be if the temperature adjusted to 0.4 degrees Celsius. This problem can be solved using the combined gas law equation.

p1V1/T1 = p2V2/T2

where:

p1 = pressure 1, V1 = volume 1, T1 = temperature 1, p2 = pressure 2, V2 = volume 2, T2 = temperature 2

Initially,

p1 = p2 (since the balloon adjusts to maintain the same pressure).

Also, we are given:

V1 = 27.6 L

T1 = 18.1 °C = 18.1 + 273.15 = 291.25 K (kelvin)

T2 = 0.4 °C = 0.4 + 273.15 = 273.55 K (kelvin)

Rearranging the equation gives:

V2 = (p1V1T2) / (p2T1)

V2 = (1 × 27.6 × 273.55) / (1 × 291.25)

V2 = 25.94 L (rounded to two decimal places)

Therefore, the volume would be 25.94 L if the temperature adjusted to 0.4 degrees Celsius. This means that the latex balloon would decrease in volume when it is cooled down by 0.4 degrees Celsius from the initial temperature of 18.1 degrees Celsius.

To know more about latex balloon visit:

https://brainly.com/question/17087122

#SPJ11

The alcohols that will give a positive chromic acid test is a) primary alcohols only.

The chromic acid test is a chemical test used to distinguish between different types of alcohols based on their reactivity. The test involves adding a solution of chromic acid (Jones reagent) to the alcohol and observing any color change or precipitation.

In this case, the correct answer is (a) primary alcohols only. Primary alcohols, which have the -OH group attached to a carbon atom that is bonded to only one other carbon atom, will give a positive chromic acid test. This is because primary alcohols can undergo oxidation to form aldehydes and carboxylic acids.

In summary, the chromic acid test gives a positive result for primary alcohols (answer a) but not for secondary or tertiary alcohols. This test is based on the ability of primary alcohols to be oxidized to aldehydes and carboxylic acids. Therefore, Option a is correct.

Know more about chromic acid test here:

https://brainly.com/question/30892406

#SPJ8

For the lowest hydrocarbon emissions, the engine design feature used is b. High combustion chamber surface-area-to-volume ratio. To achieve the lowest hydrocarbon emissions, the engine design feature used is a high combustion chamber surface-area-to-volume ratio, as it promotes better fuel-air mixing and more efficient combustion.

Hydrocarbon emissions from engines are a significant concern due to their contribution to air pollution and their role as precursors to the formation of harmful pollutants such as ozone and particulate matter. The design of the combustion chamber in an engine plays a crucial role in minimizing hydrocarbon emissions.

A high combustion chamber surface-area-to-volume ratio promotes better fuel-air mixing and more efficient combustion. It allows for increased interaction between the fuel and air, leading to improved combustion and reduced unburned hydrocarbon emissions. With a higher surface-area-to-volume ratio, there is a larger surface available for fuel vaporization and combustion to occur.

On the other hand, options a, c, and d do not directly address the issue of hydrocarbon emissions. Option a (low combustion chamber surface-area-to-volume ratio) may result in poor fuel-air mixing and incomplete combustion, leading to higher hydrocarbon emissions. Option c (non-centrally mounted spark plug) and option d (increased quench area) are not directly related to minimizing hydrocarbon emissions.

To achieve the lowest hydrocarbon emissions, the engine design feature used is a high combustion chamber surface-area-to-volume ratio, as it promotes better fuel-air mixing and more efficient combustion.

To know more about hydrocarbon visit:-

https://brainly.com/question/22047391

#SPJ11

a. Low combustion chamber surface-area-to-volume ratio. Other design features mentioned (b, c, d) do not directly relate to reducing hydrocarbon emissions. A high combustion chamber surface-area-to-volume ratio (b) can lead to increased heat loss and less efficient combustion. A non-centrally mounted spark plug (c) may affect the ignition process but does not have a direct impact on hydrocarbon emissions.

For lowest hydrocarbon emissions, the engine design feature used is a low combustion chamber surface-area-to-volume ratio.

When the combustion chamber has a lower surface-area-to-volume ratio, it promotes better combustion efficiency. This means that the fuel-air mixture is more thoroughly burned, resulting in fewer unburned hydrocarbons being emitted into the exhaust gases.

A lower surface-area-to-volume ratio reduces the chances of fuel sticking to the chamber walls or other surfaces, allowing for more complete combustion. This design feature helps minimize hydrocarbon emissions, which are harmful pollutants contributing to air pollution and environmental damage.

Other design features mentioned (b, c, d) do not directly relate to reducing hydrocarbon emissions. A high combustion chamber surface-area-to-volume ratio (b) can lead to increased heat loss and less efficient combustion. A non-centrally mounted spark plug (c) may affect the ignition process but does not have a direct impact on hydrocarbon emissions. An increased quench area (d) refers to the region in the combustion chamber where fuel and air mix, but it does not specifically address hydrocarbon emissions.

To know more about combustion visit:  

https://brainly.com/question/13251946

#SPJ11

The correct statements are: 1. The atom has electrons in states n = 2 and n = 3. 2. The atom has three electrons in the energy level for which n = 3.

The electron configuration describes how electrons are distributed among the energy levels, sublevels, and orbitals in an atom. The notation used to represent the electron configuration is based on the principle quantum number (n), azimuthal quantum number (l), magnetic quantum number (ml), and spin quantum number (ms).

Based on the given statements, let's analyze each option:

1. The atom has electrons in states n = 2 and n = 3:

This statement is correct. The electron configuration mentioned in the statement suggests that there are electrons present in both the second (n = 2) and third (n = 3) energy levels.

2. The atom has six electrons in the state n = 2, l = 1:

This statement is incorrect. The quantum numbers n = 2 and l = 1 represent the 2p sublevel, which can accommodate a maximum of 6 electrons. However, the statement does not provide information about the number of electrons present in this particular state.

3. The atom has three electrons in the energy level for which n = 3:

This statement is correct. The statement indicates that there are three electrons in the energy level corresponding to n = 3.

4. The atom has only one electron in the state n = 3, l = 2:

This statement is incorrect. The quantum numbers n = 3 and l = 2 represent the 3d sublevel, which can accommodate a maximum of 10 electrons. However, the statement mentions only one electron in this state.

Based on the analysis, the correct statements are that the atom has electrons in states n = 2 and n = 3, and it has three electrons in the energy level for which n = 3. The statements regarding the number of electrons in specific states (n = 2, l = 1 and n = 3, l = 2) are not supported by the given information.

To know more about Energy Level, visit

https://brainly.com/question/20561440

#SPJ11

The correct answer is (D)  it may have 0 double bonds and 3 rings, that is, the statement that applies to a C10H14O2 compound is it may have 0 double bonds and 3 rings

To determine the possible number of double bonds and rings in a C10H14O2 compound, we can use the concept of degree of unsaturation. The degree of unsaturation represents the number of pi bonds and rings present in a molecule.

The formula for the degree of unsaturation is given by:

Degree of unsaturation = (2n + 2 - x)/2

Where:

n = number of carbon atoms

x = number of hydrogen atoms

(Note: Oxygen does not contribute to the degree of unsaturation calculation)

For the given compound C10H14O2:

n = 10

x = 14

Degree of unsaturation = (2 * 10 + 2 - 14)/2

= (20 + 2 - 14)/2

= 8/2

= 4

A degree of unsaturation of 4 suggests the presence of either 4 double bonds or 4 rings (or a combination of both) in the compound.

Among the options given:

A) 2 double bonds and 2 rings: This does not match the degree of unsaturation of 4.

B) 3 double bonds and 0 rings: This does not match the degree of unsaturation of 4.

C) 1 triple bond and 3 rings: This does not match the degree of unsaturation of 4.

D) 0 double bonds and 3 rings: This matches the degree of unsaturation of 4.

The statement that applies to a C10H14O2 compound is option D) it may have 0 double bonds and 3 rings.

To know more about Compound, visit

brainly.com/question/14782984

#SPJ11

To calculate the molality of a solution, we need to determine the moles of solute and the mass of the solvent. In this case, the solute is sulfuric acid (H2SO4) and the solvent is water (H2O).

First, let's calculate the moles of sulfuric acid:

Moles of sulfuric acid = Mass of sulfuric acid / Molar mass of sulfuric acid

Moles of sulfuric acid = 12.2 g / 98.09 g/mol

Moles of sulfuric acid = 0.1245 mol

Next, let's calculate the mass of water:

Mass of water = 220 g

Now we can calculate the molality:

Molality = Moles of solute / Mass of solvent (in kg)

Molality = 0.1245 mol / (220 g / 1000)

Molality = 0.1245 mol / 0.22 kg

Molality = 0.566 mol/kg

Therefore, the molality of the sulfuric acid solution is 0.566 mol/kg.

Learn  more about the solvent here: brainly.com/question/28175959

#SPJ11

The percentage decrease in the amount of dissolved oxygen is 10%

Percent yield is the percent ratio of actual yield to the theoretical yield. It is calculated to be the experimental yield divided by theoretical yield multiplied by 100%. If the actual and theoretical yield ​are the same, the percent yield is 100%

In chemistry, yield is a measure of the quantity of moles of a product formed in relation to the reactant consumed, obtained in a chemical reaction, usually expressed as a percentage.

From the graph,

The amount of dissolved oxygen at  15°C is 10 mg/L

The amount of dissolved oxygen at  20°C is 9 mg/L

The decrease in the amount of dissolved oxygen is 1mg/L

The percentage decrease = (1/10) × 100 = 10%

Learn more about Percentage yield, here:

https://brainly.com/question/30794636

#SPJ1

The Ksp (solubility product constant) for Ag2SO3 is approximately 3.75 x 10^-11.

The molar solubility of Ag2SO3 in pure water is given as 1.55 x 10^-5 M. From this information, we can calculate the Ksp value using the following steps:

Write the balanced chemical equation for the dissolution of Ag2SO3 in water:

Ag2SO3(s) ⇌ 2Ag+(aq) + SO3^2-(aq)

Construct the equilibrium expression for the dissolution process:

Ksp = [Ag+]^2 * [SO3^2-]

Substitute the molar solubility value into the equilibrium expression:

Ksp = (1.55 x 10^-5 M)^2 * (1.55 x 10^-5 M)

Calculate the value of Ksp:

Ksp ≈ 3.75 x 10^-11

Therefore, the solubility product constant (Ksp) for Ag2SO3 is approximately 3.75 x 10^-11. This value represents the equilibrium constant for the dissolution of Ag2SO3, indicating the extent to which the compound dissociates into its constituent ions, Ag+ and SO3^2-, in water. The molar solubility of 1.55 x 10^-5 M in pure water corresponds to the concentration of Ag+ and SO3^2- ions at equilibrium.

By squaring the concentration of Ag+ ions and multiplying it by the concentration of SO3^2- ions, we obtain the Ksp value. In this case, the low Ksp value suggests that Ag2SO3 has limited solubility in water, indicating that it is a relatively insoluble compound.

Learn more about dissolution process here: brainly.com/question/11662104

#SPJ11

The new volume of the soccer ball will be 2.46 L after adding 0.021 mol of helium gas.

The given parameters in the question are:

Number of moles of

Helium gas = 0.092 + 0.021 = 0.113 mol

Volume of Soccer ball = 2 L

To find: New volume of the soccer ball. We can use the Ideal Gas Law,

PV = nRT

where, P = Pressure, V = Volume of the gas, n = Number of moles of the gas, R = Ideal gas constant (0.082 L·atm/K·mol), T = Temperature (Constant)

From the above equation, we can write

V₁ / n₁ = V₂ / n₂

Where,V₁ = Initial volume of the gas, n₁ = Initial number of moles of the gas, V₂ = Final volume of the gas, n₂ = Final number of moles of the gas

Now, substituting the given values in the above equation, we get

V₂ = V₁ x n₂ / n₁V₁ = 2 L

n₁ = 0.092 mol

n₂ = 0.113 mol

V₂ = 2 L x 0.113 mol / 0.092 mol = 2.46 L

Therefore, the new volume of the soccer ball will be 2.46 L after adding 0.021 mol of helium gas.

To know more about helium gas visit:

https://brainly.com/question/13645498

#SPJ11

The density of a liquid is 1.09 g/ml. what is the mass of a 27.3 ml sample of this liquid in units of g is 2.507 g

we  know that,  ρ = [tex]\frac{M}{V}[/tex]

Here,

         ρ   = density of the substance

          M = mass of the substance

          V = Volume of the substance

given , density ρ = 1.09 g/ml

            volume V =27.3 ml

Then, the mass of the liquid can be given by,

               M = ρ × V

               M = 1.09  g/ml  × 27.3 ml

               M = 2.507 g

Thus ,the mass of the liquid in g is 2.507 g

Learn more about density of substances,

https://brainly.com/question/31521608?referrer

Ethane is a saturated hydrocarbon with the molecular formula C2H6. Ethane reacts with bromine in the presence of heat to produce bromoethane (ethyl bromide).C2H6 + Br2 → CH3CH2Br + HBr

Ethane reacts with bromine in the presence of heat to produce bromoethane. In a limited amount of bromine, bromination of ethane occurs. When bromine reacts with ethane, it adds across the double bond to create 1,2-dibromoethane, but that's not what happens here due to the limited quantity of bromine.Ethane reacts with bromine in the presence of heat to produce bromoethane (ethyl bromide). The reaction produces ethyl bromide as the product, with hydrogen bromide as a byproduct. This is a halogenation reaction, in which a bromine molecule (Br2) adds across the carbon-carbon double bond of ethane (C2H6) to form bromoethane (C2H5Br) as a product.In a limited quantity of bromine, only one bromine atom reacts with ethane to form bromoethane, and the other remains unreacted, resulting in incomplete bromination.

When ethane reacts with bromine in the presence of heat, bromoethane (ethyl bromide) is formed. In a limited amount of bromine, bromination of ethane occurs, resulting in incomplete bromination.

To learn more about halogenation reaction visit:

brainly.com/question/31671200

#SPJ11

There are 0.40 moles of gas in a 10.0 L container.

To calculate the number of moles of a gas sample that is contained in a 10.0L container, we need to make use of the Ideal Gas Law equation which is PV = nRT.What is the Ideal Gas Law?The Ideal Gas Law equation is a combination of the Boyle's law, Charles law and Avogadro's law which states that PV = nRT. In this equation, P represents the pressure of the gas in atmospheres, V represents the volume of the gas in liters, n represents the number of moles of gas, R represents the gas constant which is 0.0821 L atm mol-1 K-1, and T represents the temperature of the gas in Kelvin.To solve the equation for n, we will rearrange the equation so that n = PV/RT.We will substitute the given values into the equation as follows: n = PV/RTn = (1 atm)(10.0 L) / (0.0821 L atm/mol K)(298 K)n = 0.40 mol

for more such questions on  moles

https://brainly.com/question/15356425

#SPJ11

The chemical reaction given is 2A + B ⇄ 2C + 2D. The correct answer is D) The rate is equal to k[A][B]. The overall order of a reaction can be calculated by adding the exponents of the concentration of the reactants involved in the rate equation.

The order of the reaction is:

order = m + n

where m and n are the exponents of A and B respectively. The given reaction is a chemical equilibrium, which means it is a reversible reaction. We can say that the reaction is a reversible first-order reaction with respect to A and a reversible first-order reaction with respect to B.

Therefore, the rate law for the given reaction can be given as:

rate = k[A]^1[B]^1 = k[A][B]

The rate law of a chemical reaction describes the relationship between the rate of the reaction and the concentration of reactants. The rate law depends on the order of the reaction with respect to each reactant.The order of a reaction is defined as the sum of the exponents in the rate law expression. The exponents are determined experimentally, and their values depend on the reaction mechanism. A chemical reaction can be classified as first-order, second-order, third-order, etc. based on the sum of the exponents in the rate law expression. The order of the reaction can be fractional or negative as well. In the given reaction, the rate law is equal to k[A][B], which means that the reaction is second order with respect to A and B. The overall order of the reaction is two. The value of k is a constant that depends on the temperature and other conditions of the reaction.The given reaction is reversible, which means that the products can react to form the reactants. At equilibrium, the rates of the forward and backward reactions are equal, and the concentrations of the reactants and products remain constant. The equilibrium constant (Kc) of the reaction can be calculated using the concentrations of the reactants and products at equilibrium.

Thus, the correct statement concerning the reaction 2A + B ⇄ 2C + 2D is that the rate is equal to k[A][B].

To know more about concentration visit:

brainly.com/question/30862855

#SPJ11