What is the current that reverses direction in a regular patter called

Answers

Answer 1

Answer:

Current that reverses direction in the regular pattern is called an alternating current, abbreviated as 'AC'.

Explanation:

hope this helps!


Related Questions

which natural disaster comes from powerful thunderstorms that originate over land
a hurricane
b cyclone
c tornado
d typhoon​

Answers

The correct answer is typhoon.

Hope this helps!

Answer:

Typhoons form over landmasses, typically after a period of very warm weather. Desert areas are known to have flash floods. Flash floods are normally widespread over large areas, rising and dissipating slowly. Violent, whirling wind that moves in a narrow path over land, forming a highly destructive funnel is called a .

Explanation:

I hope this helps and pls mark me brainliest :)

A 127 N object vibrates with a period of 3.32 s when hanging from a spring. What is the spring constant of the spring? The acceleration of gravity is 9.81 m/s 2 . Answer in units of N/m.

Answers

Answer:

The spring constant is approximately 46.382 newtons per meter.

Explanation:

From Physics, the period ([tex]T[/tex]), measured in seconds, experimented by an object under Simple Harmonic Motion:

[tex]T = 2\pi\cdot \sqrt{\frac{W}{g\cdot k} }[/tex] (1)

Where:

[tex]W[/tex] - Weight, measured in newtons.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

[tex]k[/tex] - Spring constant, measured in newtons per meter.

If we know that [tex]W = 127\,N[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]T = 3.32\,s[/tex], then the spring constant of the system is:

[tex]\frac{T^{2}}{4\cdot \pi^{2}} = \frac{W}{g\cdot k}[/tex]

[tex]k = \frac{4\cdot \pi^{2}\cdot W}{g\cdot T^{2}}[/tex]

[tex]k \approx 46.382\,\frac{N}{m}[/tex]

The spring constant is approximately 46.382 newtons per meter.

pennies used to be called coppers. how do you suppose they got this nickname?

Answers

Answer:

because pennies are made from copper

Explanation:

Hypochondriacs seek out medical care in order to verify that they do not have an illness.
Please select the best answer from the choices provided
T
F

Answers

Answer:

False

Explanation:

Just took the test

False, because hypochondriacs think they have a significant, undetected medical ailment even when testing reveal they are healthy.

Who are hypochondriacs?

A hypochondriac is someone who, despite diagnostic testing showing they have no health issues, lives in constant anxiety that they have a terrible, undetected medical illness. They are obsessed with the concept that they suffer from a major illness that has gone untreated.

In adults, hypochondriasis often begins to manifest. Among the symptoms are a persistent, strong anxiety of developing a major illness and concern that seemingly little symptoms portend a larger problem. A patient may change physicians or see them regularly.

Medication and counselling could be helpful.

Learn more about hypochondriac, here:

https://brainly.com/question/11046677

#SPJ5

which of these is NOT a metamorphic rock?

Basalt
Slate
Marble​

Answers

Explanation:

Basalt is not a metamorphic rocks

basalt is the answer

The net horizontal force on a box F as a function of the
horizontal position x is shown below.
Force (N)
40
20+
Position (m)
4
4
6
oc
10
12
14
-20+
-40
What is the work done on the box from x = 0m to
16 m?
Round answer to two significant digits.
J

Answers

Answer:

0J

Explanation:

Kahn academy approved

The Workdone is the product of force and distance, Hence, the Workdone on the box from distance x = 0 meters and x = 16 meters is 0 Joules.

Using the graph given :

The work done from x = 0 to x = 16 metres ;

The distance can be split evenly into :

(x = 0 to x = 8) and (x = 8 to x = 16)

Workdone = Force × distance

Workdone from ; x = 0 to x = 8 ;

Force at a distance of 8 meters = - 40N

Workdone = - 40N × 8 m = -320 Nm

Workdone from ; x = 8 to x = 16 ;

Force at a distance of 16 meters = 40 N

Workdone = 40 N × 8 m = 320 Nm

The total workdone :

(-320 + 320) Nm = 0 J

.

Therefore, the Workdone ls 0 Joules.

Learn more :https://brainly.com/question/1488131

How much voltage would it take to push 0.5 amps through a 2 kilowatt toaster?
1000 Volts
2000 Volts
3000 Volts
4000 Volts
5000 Volts
6000 Volts

Answers

Given :

Current, I = 0.5 A.

Power of toaster, P = 2 kW = 2000 W.

To Find :

How much voltage is required.

Solution :

We know, voltage is given by :

[tex]V = \dfrac{P}{I}\\\\V = \dfrac{2000\ W}{0.5 A}\\\\V = 4000 \ volts[/tex]

Therefore, 4000 Volts are required.

Answer:

4000

Explanation:

2000/0.5=4000

According to the law of universal gravitation, any two objects are attracted to each other. The strength of the gravitational force depends on the masses of the objects and their distance from each other.

Many stars have planets around them. If there were no gravity attracting a planet to its star, the planet's motion would carry it away from the star. However, when this motion is balanced by the gravitational attraction to the star, the planet orbits the star.

Two solar systems each have a planet the same distance from the star. The planets have the same mass, but Planet A orbits a more massive star than Planet B.


Which of the following statements is true about the planets?
A.
Planet B is more attracted to its star than Planet A.
B.
Planet B will keep orbiting its star longer than Planet A.
C.
Planet A orbits its star faster than Planet B.
D.
Planet A has a longer year than Planet B.

Answers

Answer:

C. Plant A orbits its star faster than Plant B

Explanation:

Did it on study island

A balloon of hydrogen is put into to pressure chamber. The initial pressure and volume of hydrogen is 1 atm and .5 cm3. The pressure of the chamber is increased to 2 atm. What is the new volume? Use the formula for Boyle's Law: P1V1 = P2V2

Answers

Answer:

2.5 cm³

Explanation:

Use Boyle's Law

1×5=2×V

5=2V

V=5/2=2.5 cm³

why is there no reflection formed when light is absent?​

Answers

Explanation:

Because there is no light to be reflected. Reflection is the process of bouncing back of the light but since there is no light then nothing will be reflected.

It is correct .

The light is not reflected by the mirror in a dark room due to which no image is formed.

What are shadows?A shadow is a dark area where light from a light source is blocked by an opaque object.It occupies all of the three - dimensional volume behind an object with light in front of it. The cross section of a shadow is a two - dimensional silhouette, or a reverse projection of the object blocking the light

Given is that no reflection is formed when light is absent.

We will not see our reflection in mirror in a dark room because an image is formed only when the light gets reflected by the mirror whereas in a dark room, there is no light to cause reflection hence, no image will be formed

Therefore, the light is not reflected by the mirror in a dark room due to which no image is formed.

To solve more questions on reflection, visit the link below -

https://brainly.com/question/3952884

#SPJ6

Put the following objects in order of increasing momentum: a parked car, a train moving at 50 km/h, a train moving at 80 km/h, a car moving at 50 km/h.

Answers

Answer:

1.parked car 2.car moving 50 km/h 3.train moving at 50 km\h 4.train moving at 80km\h

1.parked car 2.car moving 50 km/h 3.train moving at 50 km\h 4.train moving at 80 km\h is increasing momentum order.

What is momentum?

In Newtonian mechanics, momentum is the product of the mass and velocity of an object. It is a vector quantity, possessing a magnitude and a direction. If m is an object's mass and v is its velocity, P = mv.

The total momentum experienced by the object depends on the force acting on it. The momentum remains unchanged in the absence of external forces.

1.parked car 2.car moving 50 km/h 3.train moving at 50 km\h 4.train moving at 80 km\h is increasing momentum order.

To learn more about momentum refer to the link:

brainly.com/question/24030570

#SPJ2

Can someone help me with this answer the question pls don’t guess and actually help me I’ll give brainliest

Answers

Answer: clastic sedimentary rock

Explanation: Hope this helps!

What term is defined as speed with a specific direction?
velocity
position
distance
displacement

Answers

IT IS A : VELOCITY (Please give me brainliest)

Answer:

Velocity

Explanation:

I took the test.

How could you measure the strength of static electricity compared to the strength of an
electromagnet?

Answers

Answer:

Lines of Force around an Electromagnet

Explanation:

The magnetic field strength of an electromagnet is therefore determined by the ampere turns of the coil with the more turns of wire in the coil the greater will be the strength of the magnetic field

If one soccer ball is rolling to the right at 3 m/s and another soccer ball is rolling left with a speed of 5 m/s, how much momentum is there in this system before they collide with each other? Both have a mass of 1 KG​

Answers

Answer:

Final momentum after a head on collision is -2kgm/

Explanation:

  One ball moves to the right and the other moves opposite  and momentum is a vector quantity so that considering the direction

Initial momenta are        P₁=2x3=6kgm/s        P₂=4x(-2)=-8kgm/s      

Final momentum is the vector sum of P(final)= 6-8= -2 kgm/s

what is the name of the compound Cu(HCO3)2​

Answers

Answer:

Copper(II) Hydrogen Carbonate Cu(HCO3)2 Molecular Weight

The name of the compound Cu(HCO₃)₂ is  Copper (II) bicarbonate.

What is chemical compound?

A chemical compound is a substance made of numerous similar molecules (or molecular entities) joined by chemical bonds and comprising atoms from various chemical elements.

Therefore, a molecule made up of only one type of atom is not a compound. Chemical reactions, which may entail interactions with other molecules, can change a compound into a distinct substance. Atomic bonds may be shattered or new ones created during this process.

Compounds can be divided into four main categories based on the bonds that hold their individual atoms together. Covalent bonds hold together molecules, ionic bonds hold together ions, metallic bonds hold together intermetallic compounds, and coordinate covalent bonds hold coordination complexes together.

Learn more about chemical compound here:

https://brainly.com/question/20458524

#SPJ6

Why must 0s always be clearly marked on a motion map?

Answers

Answer:

A motion map can represent the position, velocity, and acceleration of an object at various clock readings. ... The corresponding motion map has the points spaced farther apart (because the car would go a further distance in each second), and the velocity vectors (arrows) are longer, because the car is moving faster.

Explanation:

The difference between a Scalar quantity and a Vector quantity?

Answers

Answer:

A quantity that has magnitude but no particular direction is described as scalar. A quantity that has magnitude and acts in a particular direction is described as vector.

which event involves throwing a spherical weight from the shoulder?
a. discus throw
b. hammer throw
c. shot put​

Answers

Answer:

c. shot put

Explanation:

cause the shot is a ball

Shot put!!!!! C:shot put

Explain why background radiation is a mixture of contamination and irradiation

Answers

Answer:

People are exposed to sources of radiation in all aspects of everyday life. Radioactive sources can be very useful but need handling carefully to ensure safety.

Explanation:

Agatha has 1kg samples of two substance- A and B. Substance A has a higher specific heat capacity than substance B. Both samples cool down by 10C. Which will release more heat - A or B

Answers

Answer:

Substance A will release more heat.

Explanation:

Let suppose that both substances experiment an entirely sensible heat process and are incompressible and begin at the same temperature. Physically speaking, specific heat ([tex]c[/tex]), measured in kilojoules per kilogram-degree Celsius, can be described by following expression:  

[tex]c = \frac{Q}{m\cdot (T_{f}-T_{o})}[/tex] (1)

Where:

[tex]Q[/tex] - Released heat, measured in kilojoules.

[tex]m[/tex] - Sample mass, measured in kilograms.

[tex]T_{o}[/tex], [tex]T_{f}[/tex] - Initial and final temperatures of the sample, measured in degrees Celsius.

If we know that [tex]c_{A}> c_{B}[/tex], [tex]m_{A} = m_{B}[/tex], [tex]T_{A,o} = T_{B,o}[/tex] and [tex]T_{A,f} = T_{B,f}[/tex], then we have the following inequation:

[tex]\frac{Q_{A}}{m\cdot (T_{A,f}-T_{A,o})} > \frac{Q_{B}}{m\cdot (T_{B,f}-T_{B,o})}[/tex]

[tex]Q_{A} > Q_{B}[/tex]

Substance A will release more heat.

*Urgent*


(Part 1)


A merry-go-round rotates at the rate of 0.4 rev/s with an 99 kg man standing at a point 2.5 m from the axis of rotation. What is the new angular speed when the man walks to a point 1 m from the center? Consider the merry-go-round is a solid 73 kg cylinder of radius of 2.5 m. Answer in units of rad/s.


(Part 2)


What is the change in kinetic energy due to this movement? Answer in units of J.

Answers

Answer:

6.5 rad/s

11.695 kJ

Explanation:

Using the principle of conservation of momentum, we have

L1 = L2 and

I1w1 = I2w2, with I being the moment of inertia and w being the angular velocity.

w1 = 0.4 rev/s = 0.4 * 2π = 2.51 rad/s

Moment of Inertia, I = ½MR² + mr²

I1 = ½ * 73 * 2.5² +99 * 2.5²

I1 = 73 * 3.125 + 99 * 6.25

I1 = 228.125 + 618.75

I1 = 846.875 kgm²

The man has been said to have walked 1 m away from his position, so then

I2 = ½ * 73 * 2.5² + 99 * 1²

I2 = 228.125 + 99

I2 = 327.125 kgm²

From the formula stated above,

w2 = I1w1 / I2

w2 = (846.875 * 2.51) / 327.125

w2 = 2125.65725 / 327.125 rad/s

w2 = 6.5 rad/s

2

K = Iw²

K = 846.875 * 2.51²

K = 2125.65725 J

K'= Iw²

K' = 327.125 * 6.5²

K' = 13821.03125 J

Change in energy is given as, K' - K, so that

Energy, E = 13821.03125 - 2125.65725

Energy, E = 11.695 kJ

A spring with a spring constant of 40 N/m is compressed 0.15 m. How much energy is stored in the spring?

Answers

Answer: Energy is conserved.

Explanation: Energy stored in spring = Potential energy gained by object at maximum height

Eiman connects eight 12Ω lamps in series. What is
the total resistance of the circuit?

Answers

Answer:

Total resistance = 96 Ohms

Explanation:

Given the following data;

Resistance = 12 Ohms

Number of resistors = 8

To find the total resistance;

Method I.

Since the resistors are connected in series, we would simply multiply the resistance by the number of resistors.

Total resistance = 12 * 8

Total resistance = 96 Ohms.

Method II.

We would add the resistance of all the eight resistors together.

Total resistance = 12 + 12 + 12 + 12 + 12 + 12 + 12 + 12

Total resistance = 96 Ohms.

The total resistance of the circuit will be "96 Ω".

Resistance and Current:

Resistance: The amount of resistance to current flow throughout an electrical circuit.

Current: The movement of electrical charge carriers such as electrons has been referred to as current. The flow of current seems to be from negative (-) to positively (+) locations.

According to the question,

Resistance = 12 Ω

No. of resistor = 8

The total resistance be:

= [tex]Resistance\times Number \ of \ resistors[/tex]

By substituting the values,

= [tex]12\times 8[/tex]

= [tex]96 \ \Omega[/tex]

Thus the above answer is right.

Find out more information about resistance here:

https://brainly.com/question/24858512

please help me guys please please please​

Answers

Answer:

Mass = 2154 grams

Explanation:

Given the following data;

Acceleration = 520m/s²

Force = 11.2N

To find the mass;

Force = mass * acceleration

Mass = force/acceleration

Substituting into the equation, we have;

Mass = 11.2/520

Mass = 2.154 kg

Therefore, the value of mass in grams;

1000 grams = 1 kilograms

x grams = 2.154 kilograms

Cross-multiplying, we have;

2.154 * 1000 = 2154 grams.

Mass = 2154 grams.

Therefore, the mass of the model rocket is equal to 2154 grams.

If a machine exerts a force of 250N on an object and no work is done, what must have occurred?

Answers

The object did not move / was kept from moving.

How to calculate the refraction of light from air to water​

Answers

Answer:

hope it would be helpful

2. A compressed gas is held inside a canister with a moveable lid. The temperature of the gas is significantly

higher than the air temperature outside the canister. When weight is removed from the lid, the gas

expands to lift it. For this expansion to be as nearly adiabatic as possible, which condition should be met?

Answers

Answer:

Heat supplied should be equal to zero.

Explanation:

Given that a compressed gas is held inside a canister with a moveable lid. The temperature of the gas is significantly higher than the air temperature outside the canister. When weight is removed from the lid, the gas

expands to lift it.

For this expansion to be as nearly adiabatic as possible, one of the conditions that should be met is that there should be no supply of thermal or heat energy to the system.

According to first law of thermodynamics:

Change in internal energy = heat supply + work done by the system

If heat supplied = 0

Then, nothing is constant.

The internal energy = work done by the system.

Therefore, no heat should be supplied to the system.

Between steel and iron which is more suitable for making permanent magnets electromagnet and magnetic screen ​give reason for your answer

Answers

Answer:

steel is suitable for making permanent magnet

as still has hi factor coercity.

iron is for electromagnet and magnetic screen as iron loses its magnetism as soon as the switch is open and a current is switched off.

Steel is better suitable for making permanent magnets than soft iron since it has higher retentivity and lower coercivity. Compared to soft iron, steel has a lower retentivity and higher coercivity. Compared to soft iron, steel is more resilient and coercive.

What is retentivity and coercivity ?Retentivity : The ability to retain the generated magnetization in a magnetic material when the magnetizing force is removedCoercivity : A measure of the ability of a material to withstand an external magnetic field without becoming demagnetized.What is Permanent magnet and Electromagnet?

Permanent magnet : To be suitable for permanent magnet, material should retain its magnetism for longer time, since  steel have high retentivity and coercivity . Electromagnet : To be suitable for electromagnet , material should have magnetization and demagnetizing property .

Since , steels have high remanence which means it will remain magnetized even after magnetic field is removed which is not suitable for electromagnetic . iron has high permeability so magnetization is larger and have low retentivity so that material will not retain the magnetic properties . Magnetic screen ​, Iron has high permeability hence it can shield better than steel

To learn more about retentivity and coercivity

https://brainly.com/question/24130879

#SPJ2

PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!

Answers

Answer:

I can help with the last question.

Explanation:

The force from the ball on the left ball will hit the ball next to it, bringing the force all the way to the right ball, and vice versa. Have a great day!

Answer:

gravity is pulls objects to the center of the earth.

friction is slows or stops motion when objects rub together.

magnetism is pushes or pulls objects containing iron or other metals.

Other Questions
Find the Total Surface Area of the following Triangular Prisms NET Listen to the audio, read the question, and choose the correct option to answer the question.1Based on the audio, what might Maria do after arriving in Barcelona? (1 point)She may have breakfast.bShe may have lunch.She may look for a hotel.dShe may look for an umbrella. Where are fusion reactions found What are 4 characteristics of the Fall of Rome? (fill in the blank)*Period of disorder in Western *Weak central government*_____________ moved to Byzantium*Waves of _____________ from the north. how did the islamic empire continue to flourish under the abbasids Which are examples of a service business? (Check all that apply)Ford DealershipSouthwest AirlinesProcter & GambleMcDonalds how do you describe the graph of |x| < 12 brainly Refer to the Newsela article "The Relationship between Hunger and War."What is the author's viewpoint in the article? Destroying food resources is more damaging than the use of weapons.Humanitarian aid is the solution to ending food insecurity.By ending wars, nations can eliminate famine.The United Nations has done little to address the use of starvation as a weapon. An average, how many eggs does a female release eachcycle? plz help answer ASAP plz Luke is drawing triangles when given three side lengths.Which of these side lengths could be the side lengths of a triangle?Choose all that are correct.2 cm, 10 cm, 13 cm1 cm, 10 cm, 8 cm5 cm, 9 cm, 5 cm3 cm, 4 cm, 5 cm4 cm, 6 cm, 2 cm Find the distance between the points (9, 6) and (4, 7). Question 15 options: A) B) C) D) Robert Hatfield thought the creature he saw was not a bear because a) it was large b) it stood on two legs c) it was covered in fur d) it had a hatless face Un camion que circula a 90 km hora frena uniformemente con una aceleracion de -5 metros por segundos al cuadrado Read the passage from Sugar Changed the World.For an African, whether you were sent to the Caribbean or South America, you were now part of the sugar machine. And it did not much matter where your ship landed. You could be working the fertile fields of Brazil or the hills of Jamaica; the brutal cycle of making sugar was much the same.If the terrain was not too rocky or hilly, you might be part of a group of slaves who drove teams of oxen to draw plows across the fields. On rougher ground, you were sent out to clear a space five inches deep and five feet square. Then you dug holes for the cane shoots in the cleared squares. You needed to work quickly and without stopping. Overseers watched closely to make sure of that, beating slaves who did not carve out at least twenty-eight holes an hour on one French island. The painstaking work had just one aim: to plant a crop that would end up taking the life of every worker who touched it. As Equiano explained, the sugar slaves could hardly rest even when their day was done.How do the authors create a tone that develops their claim and purpose?A. by using words with negative connotations, such as brutalB. by describing the land with positive connotations, such as fertileC. by describing the land with negative connotations, such as rockyD. by using words with neutral connotations, such as plant JKL is a straight line.JK = KL = KM.Angle KLM = 58Work out the size of the angle marked x.Give a reason for each stage of your working.KX M M589L a Can of soup has a diameter of 2.5 inches and a height of 4 inches. how much metal is needed to make the can? round your answer to the nearest tenth. What is the value of x in the figure shown below?C5.5D20803.43.420AB5.5 what is a flame,metion two types of flames 20 BRAINLY POINTS TYSM TYSM TYSM ANSWER ASAP WILL PUT BRAiNLIST TYSM GOD BLESS YOU AND YOUR FAMILY TYSM TYSMA poetic form is a type of poem that has a specific structure or set of rules, including meter, rhyme scheme, length and subject matter. Two poetic forms are limericks and haikus.The origin of the limerick is unknown, but these humorous poems became popular in England in the 19th century, when Edward Lears A Book of Nonsense was printed. Limericks have five lines that rhyme AABBA, and theyre sometimes rude or vulgar to the point of obscenity.Haikus are another type of short poem, containing only three lines and 17 syllables. They are traditional to Japan and dont have a specific rhyme scheme or meter. Haikus are usually observations about nature or the seasons.According to the passage, what is one major difference between haikus and limericks?A. The ways in which they rhymeB.The number fo verbs used in themC. The kinds of people who read themD. The types of books in which they appear