Two charged objects have a repulsive force of .080 N. If the charge of both of the objects is doubled, then what is the new force?
heyy have a nice day yixxixigx
can u get this right?
8. An effort force of 15 Newtons is applied to an ideal pulley system to lift up a 16 Newton object. If the effort force is exerted through a distance of 6 meters, calculate the distance that the object is raised above its initial position.
Answer:
the distance that the object is raised above its initial position is 5.625 m.
Explanation:
Given;
applied effort, E = 15 N
load lifted by the ideal pulley system, L = 16 N
distance moved by the effort, d₁ = 6 m
let the distance moved by the object = d₂
For an ideal machine, the mechanical advantage is equal to the velocity ratio of the machine.
M.A = V.R
[tex]M.A = \frac{Load}{Effort} = \frac{L}{E} \\\\V.R = \frac{disatnce \ moved \ by \ the \ effort}{disatnce \ moved \ by \ the \ load} = \frac{d_1}{d_2} \\\\For \ ideal \ machine; \ M.A = V.R\\\\\frac{L}{E} = \frac{d_1}{d_2} \\\\d_2 = \frac{E \times d_1}{L} \\\\d_2 = \frac{15 \times 6}{16} \\\\d_2 = 5.625 \ m[/tex]
Therefore, the distance that the object is raised above its initial position is 5.625 m.
Complete the following sentence.
The Richter scale is used to compare the
_____ of earthquakes.
Answer:
magnitude
Explanation:
The Richter scale compares the magnitude or energy of earthquakes
What is directly created when radiation from the Sun heats air in the atmosphere?
erosion
humidity
precipitation
wind
Answer:
Wind
Explanation:
I had this question on one of my tests, and I got it right
A mercury in barometer shows a height of 70cm.What height would be shown in the barometer at the same place if water density 1.0×10³kg/m³ is used(denssity of mercury=13600kgm-³)
Answer:
P = d g h pressure due to density of liquid of height h
d1 g h1 = d2 g h2 since P1 equals P2
d1 h1 = d2 h2 and the density of Hg is 13.6 times that of water
h2 = (d1 / d2) * h1 = 13.6 * 70 cm = 952 cm or 9.52 m
1. Name two ways of applying forces ?
Answer: A force can be applied to another object by a direct push, pull, or drag.
Explanation:
Answer:
pushing ,pulling and dragging
define the concept national building
What percentage of high school students did not meet the recommended level of physical activity in one study?
A.
25%
B.
45%
C.
65%
D.
85%
Answer:
c
Explanation:
what poping
What is required for the heat to flow from one object to another?
Uniform temperature
Uniform density
Temperature difference
Density difference
Answer:
Explanation:
The answer is Temperature difference
Answer:
C
Explanation:
is the answer ,..........................
Is it possible to get more work out of a machine then you put in yes or no?
Answer:
i think its possible yes
Explanation:
Which term describes a long-term weather pattern?
air mass
climate
humidity
front
Answer:
Explanation:
The answer is Climate
Answer:
climate
Explanation:
Climate is defined as an area's long-term weather patterns. The simplest way to describe climate is to look at average temperature and precipitation over time.
A ball has a 17 J of kinetic energy and its mechanical energy ls 25 Joule.
a. Find the gravitational potential energy of the ball.
Question:
A ball has a 17 J of kinetic energy and lB mechanical energy is 25 Joule
a. Find the gravitational potential energy of the ball.
b. if the ball has a mass of 3.2 kg, what is its height above the ground?
c. What is the speed of the ball?
Answer:
a. = 85
b. h = 0.25 m
c. = 3.26 m/s
Explanation:
Part A
PEgrav = m ו g • h
In the above equation, m represents the mass of the object, h represents the height of the object and g represents the gravitational field strength (9.8 N/kg on Earth) - sometimes referred to as the acceleration of gravity. So, to find:
GPE = ME - KE = 25 - 17 = 85
Part B
The formula simplifies to: h max = h + V₀² / (2 × g) and the time of flight is the longest.
The vertical velocity is equal to 0 (Vy = 0), and that's the case of horizontal projectile motion.
The equation may be written as:
GPE = mgh
8 = 3.2 × 10 × h
h = 0.25 m
Part C
The ball speed is calculated by dividing the distance by the time. If the time was 3 seconds, the average speed will be 60/3 = 20 feet per second (6.1 m/sec). KE = 1/2 MV²
17 = 1/2 × 3.2 x V²
V = 17 ÷ 1.6
Note, this is only the average ball speed, the speed of the ball at the time of release would be greater.
Hamid is going to heat sodium chloride and water in a beaker. How can he carry out his experiment as
safely as possible?
[4 marks]
Answer:
he can wear gogles lab coat and gloves
Explanation:
Titan Tommy and the Test Tubes at a nightclub this weekend. The lead instrumentalist uses a test tube (closed-end air column) with a 17.2 cm air column. The speed of sound in the test tube is 340 m/sec. Find the frequency of the first harmonic played by this instrument.
Hello , it' s 5 but i am not sure Explanation:
What is the momentum of a bird with a mass of 0.018kg flying at 15m/s?
Answer:
0.27 kg-m/s
Explanation:
i believe this is the correct answer
A student looks at the image of a ball rolling down a ramp. The image shows four different positions for the ball Use this image to answer Questions 4–5 are attached.
The law of conservation of energy states that energy is always conserved, and cannot be destroyed.
At the top of the hill, the ball is at the maximum height. Because the equation for gravitational potential energy is ([tex]U_{g}[/tex] = mgH), we can safely conclude that the GPE at A, the top of the hill, is the greatest in all 4 options.
Now, what about Kinetic Energy? Recall the law of conservation of energy. At the point where Gravitational Potential Energy is the lowest, Kinetic Energy will be the highest. Total energy is always conserved, and so it is logical that KE will increase to compensate for GPE decreasing. Therefore, we know that at point C, the ball will have the greatest Kinetic Energy. Because this point is the lowest point in the hill, the ball will have the lowest possible GPE and therefore the largest possible KE out of the 4 options.
4. A
5. C
If you're still confused or would like me to explain this further, just ask!
- breezyツ
A lens with f = 35.0 cm is held
42.0 cm from an object. Where
does the image form?
Answer: 210 cm
Explanation:
Look up Thin Lens Equations Calculator- it helps!
Find the wavelength of a transverse wave the frequency of the wave motion is 3 Hz and the wave travels with a velocity of 48 m/s .
Answer:
16 m
Explanation:
Kara started a new exercise program. Kara’s sister works out with her on a regular basis and even talks to Kara about her progress. In this scenario, what is another name for Kara’s sister?
A.
goal-setter
B.
self-monitor
C.
support system
D.
nutritionist
What is velocity ratio? It is impossible to get a perfect machine in practical life, why?
Explanation:
VELOCITY RATIO :- The ratio of a distance through which any part of a machine moves to that which the driving part moves during the same time.What is the length of the y-component of the vector plotted below?
Answer:
A.1
Explanation:
on the vector plot you should count up and if you count up you´ll get one
The length of the y-component of the vector plotted in the given question would be 1. Thus, the correct option is A.
What is a vector plot?A vector field can be defined as an assignment of a vector to each point in the subset of space. For instance, a vector field in the plane can be easily visualized as a collection of arrows with a given magnitude and direction of a particle, each line or arrow attached to a point in the plane of space.
Vector plots are used to create vector lines between any two points or from one point in space to the specified angle direction and with the selected magnitude and direction of the quantity or quality.
In the given graph, the Y-component is the vertical line or vertical component. The value of the y-component of the vector plotted is 1.
Therefore, the correct option is A.
Learn more about Vector here:
https://brainly.com/question/29740341
#SPJ7
Identifying Obstacles
Since the purpose of these strategies is to help overcome obstacles and set-backs in your exercise routine, take a minute and think about the most obvious obstacle you have. If you do not have any obstacles at the present time, think about a potential obstacle to your exercise that could occur.
Answer:
Thx!
Explanation:
Explain how tangential speed depends on distance.
What is the solution to unit for measuring electric current?
Answer:
The SI unit for electric current is Ampere (A)
Which of the following can act
as media for a wave?
A. Solids
B. Liquids
C. Gases
D. All of the above
Answer:
D
Explanation:
im pretty sure
What is the wave speed of a wave that has a frequency of 100 Hz and a wavelength of 0.30 m?
Answer:
Explanation:Wave speed = 100 ×0.50 meter per second . Wave speed = 50 meter per second .
Which type of electromagnetic wave has the lowest frequency?
A. Infrared light
B. Visible light
C. X-rays
D. Gamma rays
The type of electromagnetic wave that has the lowest frequency is infrared light (option A).
What is an electromagnetic wave?Electromagnetic spectrum is the entire range of wavelengths of all known electromagnetic radiations.
The electromagnetic spectrum extends from the following waves:
gamma raysX-raysvisible lightinfraredradio waves.The frequency of each electromagnetic wave is as follows:
Gamma ray: 10²⁰ – 10²⁴X-rays: 10¹⁷– 10²⁰Visible light: 10¹⁵– 10¹⁷Infrared: 10¹³ – 10¹⁴radio waves: < 3 x 10¹¹Therefore, infrared light has the lowest frequency of the options.
Learn more about electromagnetic waves at: https://brainly.com/question/3101711
#SPJ1
Answer: Infrared light
Explanation: I took the test
What is force? Do systems have inputs, outputs, do they have both, do they have one, do they have the other, what are the systems.
a force is a push or pull. hope i helped!
A 110 kg fire-fighter descends down a pole. He experiences 530N of
friction.
d. Determine the fire-fighters weight
e. Draw an FBD
f. Determine the Fnet
