formula for inertia speed
Answer:
The equation of momentum for a linear system is simply P = mv where P = momentum (kg·m/sec or lb·ft/sec); m = mass (kg or lb); and v = velocity (m/s or ft/sec). ... By reducing her inertia (I = mr2 where r has been decreased) her angular velocity, ω, must increase in order for the angular momentum to remain constant.
https://www.gstatic.com/education/formulas2/355397047/en/moment_of_inertia.svg
hope this helps?
Explanation:
The result of the evolutionary process that preserves traits that enhance the adaptation of an organism and suppresses traits that do not is called
Answer:
Natural selection.
Explanation:
Natural selection can be defined as a biological process in which species of living organisms having certain traits that enable them to adapt to environmental factors such as predators, competition for food, climate change, sex mates, etc., tend to survive and reproduce, as well as passing on their genes to subsequent generations.
Simply stated, natural selection entails the survival of the fittest. Therefore, the species that are able to adapt to the environment will increase in number while the ones who can't adapt will die and go into extinction.
On the other hand, artificial selection is also known as selective breeding and it is a process that involves humans (breeders) selecting the animal or plant with desirable traits in order to reproduce favorable offspring having phenotypic traits.
After the initial experiment, students wondered how a person's weight would influence the results. They conducted a second experiment to determine if the mass of an object affected friction, assuming the types of surfaces remained constant. A spring scale was attached to a wooden block (1 kg). The block was placed on a wooden board and the spring scale was used to pull the block. The magnitude of the force required to start the block moving was recorded in the data table. The experiment was repeated using two, three, and four blocks. The data can be seen in the data table at the top of the page. What is the relationship between static friction and weight?
Answer:
The greater the weight of the person, the more static friction.
Explanation:
USATestPrep
Samir wants to be a doctor like both of his parents when he gets older he never thought of doing anything else which of the following best explains Samir decision ?
How do scientists know the continents were once closer than they are today? Explain your answer in 2-3 complete sentences.
Answer:
Continental drift describes one of the earliest ways geologists thought continents moved over time. Today, the theory of continental drift has been replaced by the science of plate tectonics.
The theory of continental drift is most associated with the scientist Alfred Wegener. In the early 20th century, Wegener published a paper explaining his theory that the continental landmasses were “drifting” across the Earth, sometimes plowing through oceans and into each other. He called this movement continental drift.
if a fly gets his wings cut of, is it still a fly?
Answer:
Yes I think... But the joke is it is a walk then.
Answer:
no
Explanation:
because if the fly get its wings cut off its obviously not going to be able to fly
Which type of force is needed to lift the weight?
A friction
B gravity
C pull
D push
b.gravity have a great day:)
A.) A gemstone of mass 1.8 kg compresses a scale's spring by 2.6 cm.
Determine the spring constant.
B.) How much would the spring in the previous question compress if a 5.2 kg mass was placed on the scale?
Explanation:
Given that,
Mass, m = 1.8 kg
Compression, x = 2.6 cm
We know that,
Force on spring = weight
So,
[tex]mg=kx[/tex]
Where
k is spring constant
[tex]k=\dfrac{mg}{x}\\\\k=\dfrac{1.8\times 9.8}{2.6\times 10^{-2}}\\\\k=678.46\ N/m[/tex]
(2) If m = 5.2 kg
[tex]x=\dfrac{mg}{k}\\\\x=\dfrac{1.8\times 9.8}{678.46}\\\\x=2.6 \ cm[/tex]
Hence, this is the required solution.
Question 1 of 10 The energy diagram shows the changes in energy during a chemical reaction. Which statement best describes the total energy change of the system? Potential energy Reaction progress O A. Energy is absorbed, and the products have higher potential energy. O B. Energy is absorbed, and the reactants have higher potential energy C. Energy is released, and the reactants have higher potential energy. O D. Energy is released, and the products have higher potential energy.
Answer: The Answer is C
Explanation:
I just got this question and took a guess I got it correct lol. Higher potential energy and energy is released.
The statement which best describes the total energy change of the system is energy is absorbed, and the reactants have higher potential energy.
What is potential energy?Potential energy is the energy which a body posses because of its position. The potential energy is the stored energy.
The energy diagram shows the changes in energy during a chemical reaction.
Potential energy and Reaction progress are shown in the problem. The reactants are the substance which reacts and form one or more than one product.
The reactants in a chemical reaction increases the potential energy for the reaction.
Thus, the statement which best describes the total energy change of the system is energy is absorbed, and the reactants have higher potential energy.
Learn more about the potential energy here;
https://brainly.com/question/15896499
Brent’s doctor recommended that he avoid hot baths while he and his wife are trying to have a child. Why did the doctor most likely make this recommendation?
Exposing the testicles to high temperatures could lead to problems
with maintaining erections.
Exposing the testicles to high temperatures could lead to problems
with producing sperm.
Exposing the testicles to high temperatures could lead to problems
with ejaculating.
Exposing the testicles to high temperatures
Answer:
Exposing the testicles to high temperatures could lead to problems
with producing sperm.
Explanation:
got it correct on the edge unit test review
Brent's doctor most likely recommended that he avoid hot baths because exposing the testicles to high temperatures could lead to problems with producing sperm.
What is sperm?The sperm is the male reproductive cell that is produced in the testes and stored in the epididymis.
The testicles (testes) of the male is located outside the body as the temperature of the body is too high for the viability of the sperm.
Therefore, exposing the testicles to high temperatures could lead to problems with producing sperm.
Learn more about sperm here:
https://brainly.com/question/25282799
#SPJ2
When a mass is suspended from a spring the latter extends over a distance of 10cm. What will be the period of oscillations of the same system if it is placed horizontal on a frictionless surface
Answer:
0.64 s
Explanation:
It's period of oscillation (T) can be determined by,
T = 2[tex]\pi[/tex][tex]\sqrt{\frac{l}{g} }[/tex]
Where l is the length (extension on the spring), and g the acceleration due to gravity.
But,
l = 10 cm = 0.1 m
g = 9.8 m/[tex]s^{2}[/tex]
Thus,
T = 2 x [tex]\frac{22}{7}[/tex] [tex]\sqrt{\frac{0.1}{9.8} }[/tex]
= 0.6350
T = 0.64 s
The period of oscillation would be 0.64 s.
Which property of light is a constant in a vacuum?
Answer:
La velocidad de la luz en el vacío es una constante universal con el valor de 299 792 458 m/s (186 282,397 mi/s),aunque suele aproximarse a 3·108 m/s. Se simboliza con la letra c, proveniente del latín celéritās (en español, celeridad o rapidez).
¿Cuál es la consecuencia que a velocidad de la luz sea constante?
Respuesta. En modificaciones del vacío más sutiles, como espacios curvos, efecto Casimir, poblaciones térmicas o presencia de campos externos, la velocidad de la luz depende de la densidad de energía de ese vacío.
A soft drink (mostly water) flows in a pipe at a beverage plant with a mass flow rate that would fill 220 0.355 - L cans per minute. At point 2 in the pipe, the gauge pressure is 152kPa and the cross-sectional area is 8.00cm2. At point 1, 1.35m above point 2, the cross-sectional area is 2.00cm2. Part A Find the mass flow rate. M
Answer:
[tex]1.302\ \text{kg/s}[/tex]
Explanation:
[tex]\rho[/tex] = Density of water = [tex]1\ \text{kg/L}[/tex]
[tex]dV[/tex] = Change in volume = [tex]220\times 0.355\ \text{L}[/tex]
[tex]dt[/tex] = Time elapsed = 1 minute = 60 seconds
Mass flow rate is given by
[tex]\dot{m}=\rho\dfrac{dV}{dt}\\ =1\times \dfrac{220\times 0.355}{60}\\ =1.302\ \text{kg/s}[/tex]
The mass flow rate is [tex]1.302\ \text{kg/s}[/tex].
How do magnets work and what effect do they have on their surroundings?
Answer:
Explanation: Magnets can be used in space. ... Magnets don't need gravity or air. Instead, their power comes from the electromagnetic field they generate all by themselves. One class of magnets, called electromagnets, does need electricity to work.
Answer:
magnets work due to a magnetic field and attract or repel an electrically charged or magnetic objects
Explanation:
its magnetism works due to alignment of atoms in a magnetic object
Why is no image formed when an object is at the focal point of a converging lens?
Answer:
the refracted rays neither converge nor diverge. After refracting, the light rays are traveling parallel to each other and cannot produce an image.
Explanation:
Which of these have a potential energy?
1. a coiled spring
2. a can of gasoline
3. a wrapped sandwich
4. a puddle of water
Answer:
coiled spring have a potential energy
Answer:
Which of these have a potential energy? A coiled spring.
Explanation:
Have a great day.
Please PLEASE HELP ASAP
A student placed four objects on a plastic tray: a rock, an eraser, a wood block, and an ice cube. The student slowly lifts the tray and measures the height at which each object begins to slide in order to compare the friction of each object. The table above shows the results. In a separate experiment the student used the same objects and tray, but glued a piece of gritty sandpaper to the tray. What results would be expected? A) The items would slide faster at the same heights. B) The items would start to slide when the tray is not lifted as high. C) The items would not slide at all, no matter how high the tray is raised. D) The tray would need to be raised higher before the items start to slide.
Answer:
D) The tray would need to be raised higher before the items start to slide.
Explanation:
The tray would need to be raised higher due to the gritty sandpaper causing it to have more grip or fraction between the two surfaces. In the first experiment it would have a smooth surface to slide across but in the second experiment it would have a rougher surface to slide across.
Example: It would be like taking two different kinds of shoes like tennis shoes and football cleets. Then seeing which one has more traction when going up a hill.
Hope this helps!!
What are the issues that hinders efforts to achieve sustainability?
Answer:
who will solve environmental problems, who is responsible for environmental problems, and who pays the cost of implementing solutions
Explanation:
How are the particles in matter organized
Answer:
Particles in agas are well separated with no regular arrangement. liquid are close together with no regular arrangement. solid are tightly packed, usually in a regular pattern.
Explanation:
hope this helps
If the radius of the Earth is 6400.0 km and the atmosphere is 10.0 km high, then the volume of air around the Earth is what?
Answer:
5.16 x 10^18 m^3
Explanation:
5.) This car battery
measures at 12.6 V
with a voltmeter. If it
produces 0.53 A of current for
a vehicle's headlight when
connected, what is the
resistance of the headlight
bulb?
Answer:
R =V/ I =12.6 ÷ 0.53= 27.77 ohm
what is a magnet? types of magnet
Answer:
Magnet withe competitive prices and high quality they offer custom-made magnets in defferent form and made with defferent materials grades
Explanation:
Sana makatolong
follow the chain of energy from a plant to a person riding a skateboard. explain what type of energy is being used at each step.
PLEASE HELP!!!!
Answer:
Answer is in a photo. I can only upload it to a file hosting service. link below!
bit
.ly
/3a
8Nt8
Which of the following would not create an inclusion fossil?
A. Insufficient oxygen-(when an organism becomes trapped in amber)
B. Low temperatures-(when an organism becomes frozen in a glacier)
C. Extremely high temperatures-(when an organism is burned in fire)
The density of 2 kilograms of iron on Earth's surface is
A. Zero.
B. The same on the moon.
C. Less on the moon.
D. Greater on the moon.
E. None of them
Answer:
B. The same on the moon.
Explanation:
The density of an object is the ratio of the mass contained by the object to the volume occupied by that mass.
[tex]Density = \frac{Mass}{Volume}[/tex]
When the object is taken from the earth to anywhere in the universe, its mass remains constant. The dimensions of the object and hence its volume also remains constant anywhere in the universe.
Therefore, the density of the object will also remain the same as it depends upon the mass and the volume of the object.
So, the correct option is:
B. The same on the moon.
A point source of light is located at the bottom of a steel tank, and an opaque circular card of radius is placed horizontally over it. A transparent fluid is gently added to the tank so that the card floats on the fluid surface with its center directly above the light source. No light is seen by an observer above the surface until the fluid is deep. What is the index of refraction of the fluid
In which region is there most likely to be a volcano?
A, African plate
B, north american plate
C, south America plate,
D, Pacific plate
Answer:
D. Pacific plate
Explanation:
took the quiz
(TCO 6) A car travelling at 70 kilometers per hour hits a block wall and comes to a complete stop. If the time for the car to reach a complete stop is 450 ms and the wall does not move, how much force was exerted on the car? The mass of the car is 1500 kg.
Answer:
F = 64800 N
Explanation:
Given that,
Initial speed of a car, u = 70 km/h = 19.44 m/s
Finally it comes to a stop, v = 0
Time,t = 450 ms
The mass of the car is 1500 kg
We need to find the force exerted on the car. The force exerted on an object is given by :
F = ma
So,
[tex]F=\dfrac{m(v-u)}{t}\\\\F=\dfrac{1500\times (19.44-0)}{450\times 10^{-3}}\\\\F=64800\ N[/tex]
So, the required force is equal to 64800 N.
Which elements are not noble gases?
Answer:
All the elements except for the ones on the last column (at the left of the periodic table)
Explanation:
Which has the least gravitational force?
Answer: Mount Nevado Huascarán
Explanation: Mount Nevado Huascarán in Peru has the lowest gravitational acceleration, at 9.7639 m/s2, while the highest is at the surface of the Arctic Ocean, at 9.8337 m/s2
