what are the values of m and n, and what does the plotted graph look like?

Answer:

The answer is C. x=z

Step-by-step explanation:

The correct answer is C. x=z.

Since x = y and y = z, then x = z. This is the transitive property of equality.

Here is a more detailed explanation:

The transitive property of equality states that if a = b and b = c, then a = c.

In this case, x = y and y = z. Therefore, x = z.

The constant of proportionality represents the rate at which Issac earns money while babysitting and can be found by dividing the amount of money he earns by the time spent babysitting.

Let's say that Issac earns $10 per hour of babysitting. Then, the constant of proportionality would be:

$10 per hour = $10/1 hour = 10

Therefore, the constant of proportionality is 10, which means that Issac earns $10 for every hour of babysitting. This relationship is an example of proportionality because the amount of money earned is directly proportional to the time spent babysitting. As Issac spends more time babysitting, he will earn more money in a proportional relationship.

To know more about proportionality refer here

https://brainly.com/question/29126727#

#SPJ11

The horizontal distance between (16, -24) and (-3, -24) is 19 units.

Explanation:

We can calculate the horizontal distance by finding the difference between the x-coordinates of the two points.

Horizontal distance = difference in x-coordinates = (-3) - 16 = -19

However, the distance is negative, which doesn't make sense as distance is always positive. So we take the absolute value of the difference to get the actual distance.

|Horizontal distance| = |-19| = 19

Therefore, the horizontal distance between the two points is 19 units.

The size of each section in a graph tells in relation to the portion of the data :

The magnitude of a graphic's segment indicates a specific attribute of the data being presented. In charts like pie charts or stacked bar graphs, each component's size denotes the relative frequency or proportion of data points in a particular category.

This implies that larger fragments reflect an increased number of data points for its associated categories whereas smaller ones represent categories with lesser data points.

Find out more on sections at https://brainly.com/question/30688367

#SPJ1

Thus, the coordinates of ΔF'I'G' after a rotation of 90° clockwise about the origin. are - F'(4,-2), I'(4,-5) and G'(2,-3).

A rotation is a turn made about a specific axis. Both clockwise and anticlockwise rotations are possible. Whereas the image is really the rotating image, the pre-image is the original item.

From the pre-image point, calculate the image. The listed pre-image point is (x , y). Change the x and y coordinates, then multiply this same previous y coordinate by -1 to get a 90 degree anticlockwise rotation. Use the guidelines mentioned below to calculate each rotation.

Clockwise :

Given :

F(2, 4), I(5, 4) and G(3, 2)

After 90 degree rotation: (x , y) ----> (y , -x)

F'(4,-2), I'(4,-5) and G'(2,-3).

Thus, the coordinates of ΔF'I'G' after a rotation of 90° clockwise about the origin. are - F'(4,-2), I'(4,-5) and G'(2,-3).

Graphs for the both triangles are obtained.

Know more about the rotations:

https://brainly.com/question/2283733

#SPJ1

Correct question:

ΔFIG has vertices at F(2, 4), I(5, 4) and G(3, 2). Graph ΔFIG and ΔF'I'G' after a rotation of 90° clockwise about the origin.​

The solution of the system of equations is given by the ordered pair (-4, 5).

In order to graph the solution to the given system of equations on a coordinate plane, we would use an online graphing calculator to plot the given system of equations and then take note of the point of intersection;

x - y = -9    ......equation 1.

3x + 4y = 8  ......equation 2.

Based on the graph shown in the image attached above, we can logically deduce that the solution to this system of equations is the point of intersection of the lines on the graph representing each of them, which lies in Quadrant II, and it is given by the ordered pairs (-4, 5).

Read more on solution and equation here: brainly.com/question/25858757

#SPJ1

The length of the main span of the George Washington Bridge is 3500 feet.

Let x be the length of the main span of the George Washington Bridge.

We know that the main span of the Walt Whitman Bridge is 600 feet longer than two-fifths of the length of the main span of the George Washington Bridge, so we can write the equation:

2000 = (2/5)x + 600

To solve for x, we can start by isolating the term with x on one side of the equation:

(2/5)x = 2000 - 600

(2/5)x = 1400

Then, we can solve for x by multiplying both sides by the reciprocal of (2/5):

x = 1400 / (2/5)

x = 3500

Therefore, the length of the main span of the George Washington Bridge is 3500 feet.

To know more about George Washington Bridge refer here:

https://brainly.com/question/7153606

#SPJ11

The amount of accumulated interest the investor can expect in 8 years is $2,880.

To calculate the accumulated interest on the life insurance policy, we can use the simple interest formula:

I = P x r x t

In this case, the principal amount invested is $4,500, the annual interest rate is 8.0% (or 0.08 as a decimal), and the time period is 8 years. Therefore:

I = 4,500 x 0.08 x 8

I = $2,880

Therefore, the investor can expect to earn $2,880 in accumulated interest at the end of 8 years.

Find out more on interest at https://brainly.com/question/28776427

#SPJ1

The solutions to the triangle PQR are:

Angle Q ≈ 112°

Side QR ≈ 8.98

Side PR ≈ 13.71

To solve the triangle PQR, we can use the fact that the sum of the angles in a triangle is always 180°. So we can find angle Q by subtracting the measures of angles P and R from 180°:

angle Q = 180° - angle P - angle R

angle Q = 180° - 42° - 26°

angle Q = 112°

Now, we can use the law of sines to find the lengths of the sides QR and PR.

The law of sines states that in any triangle ABC, the following equation holds:

a/sin(A) = b/sin(B) = c/sin(C)

where a, b, and c are the side lengths of the triangle, and A, B, and C are the opposite angles, respectively.

Applying this formula to triangle PQR, we can write:

QR/sin(R) = PQ/sin(Q)

QR/sin(26°) = 19/sin(112°)

Solving for QR, we get:

QR = (19 × sin(26°))/sin(112°)

QR ≈ 8.98

Similarly, we can find PR by applying the law of sines to triangle PQR as follows:

PR/sin(P) = PQ/sin(Q)

PR/sin(42°) = 19/sin(112°)

Solving for PR, we get:

PR = (19 × sin(42°))/sin(112°)

PR ≈ 13.71

To learn more about the law of sines;

brainly.com/question/17289163

#SPJ1

1. Write out the given equation: 8/10 + unknown fraction = 97/100

2. Subtract 8/10 from both sides of the equation to isolate the unknown fraction:

  8/10 + unknown fraction - 8/10 = 97/100 - 8/10

  Simplifying the left side: unknown fraction = 97/100 - 8/10

3. Convert both fractions to have a common denominator of 100:

  97/100 - 8/10 = 97/100 - 80/100

  Simplifying the right side: unknown fraction = 17/100

4. Therefore, the unknown fraction is 17/100.

So, the correct answer is "seventeen hundredths".

To know more about denominator refer here

https://brainly.com/question/19613319#

#SPJ11

The total area of the figure is 215π square feet

From the question, we have the following parameters that can be used in our computation:

Radius, r = 5 cm

Height, h = 14 cm

So, we have

A1 = πr²

A1 = π * 5² = 25π

A2 = 2πrh

A2 = 2 * π * 5 * 14 = 140π

A3 = 1/2(4πr²)

A3 = 1/2(4π * 5²) = 50π

So, we have

Total area = 25π + 140π + 50π

Evaluate

Total area = 215π

Hence, the total area is 215π

Read more about area at

https://brainly.com/question/24487155

#SPJ1

To calculate d²y/dx², we first need to find the first derivative of y, which is dy/dx. For y = 0.5x^-0.2, we can use the power rule of differentiation, which states that the derivative of x^n is n*x^(n-1). Therefore,

dy/dx = -0.1x^-1.2

To find the second derivative, d²y/dx², we need to differentiate dy/dx again. Using the power rule again, we get:

d²y/dx² = 0.12x^-2.2

This is the second derivative of y with respect to x.

In calculus, a derivative is a measure of how a function changes as its input changes. The second derivative is a measure of how the rate of change of the function itself changes as its input changes. It tells us about the curvature of the function at any given point.

In this case, we have calculated the second derivative of y, which gives us information about the rate of change of the slope of the function. If the second derivative is positive, the function is concave up (curving upward), and if it is negative, the function is concave down (curving downward). If the second derivative is zero, the function has an inflection point (a point where the curvature changes direction).

Overall, the second derivative is a powerful tool in calculus that helps us understand the behavior of functions in more detail.

MORE QUESTION ON second DERIVATIVE : https://brainly.com/question/15180056

#SPJ11

The correct inequality is:

A. 0.095x < 65.00.

To determine the inequality that represents the numbers of kilowatt-hours a customer could use in a month for the cost to be less than $65.00, we need to look for the rate at which the cost of electricity changes with the amount of electricity used.

From the table, we can see that the cost of electricity increases as the amount of electricity used increases.

We can also see that the cost per kilowatt-hour (the rate) is not constant. For example, the cost per kilowatt-hour for the first month is:

27.55 / 290 ≈ 0.095

But for the fourth month, it is:

47.50 / 500 ≈ 0.095

This means that the rate is not constant, and we cannot simply use a proportion to determine the numbers of kilowatt-hours that will result in a cost of less than $65.00.

However, we can use the data to create an inequality that represents the numbers of kilowatt-hours that will result in a cost less than $65.00. We can start by finding the highest cost per kilowatt-hour:

43.70 / 460 ≈ 0.095

This means that the cost per kilowatt-hour is always less than or equal to 0.095.

Next, we can set up the inequality:

0.095x < 65.00

This inequality represents the numbers of kilowatt-hours that will result in a cost less than $65.00, because if the cost per kilowatt-hour is always less than or equal to 0.095, then the total cost will be less than $65.00 if and only if the number of kilowatt-hours used is less than 684.21 (which is the result of dividing $65.00 by 0.095).

To learn more about inequality;

brainly.com/question/28823603

#SPJ1

The Mean-Value-Theorem is being used to explain why the driver received a speeding ticket even though they were traveling at exactly 60 mph at both radar-detectors. It suggests that there must have been a moment during the trip where the driver's speed was above the speed limit.

The Mean-Value Theorem is a theorem from calculus that states that for a continuous function on a closed interval, there exists at least one point in the interval where the instantaneous rate of change (the derivative) of the function is equal to the average rate of change of the function over the interval.

In this case, the police unit used the two radar detectors to determine the average-speed of the driver between the two points. The distance between the two detectors is 159 miles, and the time it took for the driver to travel that distance was 2 hours (from 2pm to 4pm), so the average speed of the driver was 159/2 = 79.5 mph.

However, the speed-limit on the highway is 65 mph, so the driver was exceeding the speed limit and received a speeding-ticket.

Learn more about Mean Value Theorem here

https://brainly.com/question/31406425

#SPJ4

The surface area of the square base pyramid is calculated to be equal to 460 square millimetres.

area of one triangle face = 1/2 × 10 mm × 18 = 90 mm² mm

area of the four triangle faces = 4 × 90 mm² = 360 mm²

area of the square base = 10 mm × 10 mm = 100 mm²

surface area of the square base pyramid = 360 mm² + 100 mm²

surface area of the square base pyramid = 460 mm²

Therefore, the surface area of the square base pyramid is calculated to be equal to 460 square millimetres.

Read more about surface area here:https://brainly.com/question/12506372

#SPJ1

The critical points are (t, y) = (t, 0) and (t, -4c/5).

To find the partial derivatives, we need to differentiate f(t, y) with respect to each variable separately.

f1(t, y) = ∂f/∂t = 0 (since there is no t term in the function)

fy(t, y) = ∂f/∂y = -12cy^3 + 15y^4

fz(t, y) = ∂^2f/∂t∂z = 0 (since there is no z term in the function)

fy(t, y) = ∂^2f/∂y∂z = 0 (since there is no z term in the function)

So, 2. - f1(,y) fy(x, y) = = frz(, y) = fry(x, y) = 0 - 12cy^3 + 15y^4 = 0  (since f1(,y) and frz(, y) and fry(x, y) are all 0)

Therefore, -12cy^3 + 15y^4 = 0

Factor out y^3:

y^3(-12c + 15y) = 0

This gives us two solutions: y = 0 or -4c/5.

So, the critical points are (t, y) = (t, 0) and (t, -4c/5).

Learn more about partial derivatives :https://brainly.com/question/31280533

#SPJ11

Answer:

The answer to your problem is, 201.06 or 201.1

Step-by-step explanation:

To find the area you use the formula:

A = π [tex]r^2[/tex]

R = Radius

A = Area

We know the radius of the circle is 8

So replace A = π [tex]r^2[/tex]

= π × 8 ≈ 201.06193

Or 201.06 or 201.1

Thus the answer to your problem is, 201.06 or 201.1

The minimum force required to move a block of 35 N resting on a steel table with a coefficient of static friction of 0.40 is 14 N.

Friction refers to the force that resists the motion and thus the force acts in the opposite direction of the force applied.

There are the following types of friction:

1. Static Friction

2. Limiting Friction

3. Kinetic Friction

F = μN

where μ is the coefficient of friction

N is the Normal Force

When the object is resting on a table, Normal force is the weight.

N = 35 N

μ = 0.40

F = 0.4 * 35

= 14 N

Learn more about Friction:

https://brainly.com/question/24338873

#SPJ4

He must sell the car at R80,625 to make an overall profit of 25%

To find the selling price of the car that gives a 25% profit, we need to use the following steps:

Calculate the total cost of buying and transporting the car to Durban:

Total cost = Cost of car + Cost of transportation

Total cost = R60,000 + R4,500

Total cost = R64,500

Calculate the desired profit:

Profit = 25% of total cost

Profit = 0.25 x R64,500

Profit = R16,125

Calculate the total amount that the car needs to be sold for:

Total amount = Total cost + Profit

Total amount = R64,500 + R16,125

Total amount = R80,625

Therefore, the man needs to sell the car for R80,625 to make an overall profit of 25%.

Learn more about sell price at https://brainly.com/question/20332293

#SPJ11

Therefore, Sara has 3.5 grams of white beads in her jar.

Based on the information provided, Sara has 2.5 grams of blue beads, 4.9 grams of pink beads, and 7.1 grams of yellow beads. If she weighs her jar this week and finds out she has a total of 18 grams of beads, we can determine the number of grams of white beads she has by following these steps:

Step 1: Add the weights of the blue, pink, and yellow beads together.
2.5 grams (blue) + 4.9 grams (pink) + 7.1 grams (yellow) = 14.5 grams

Step 2: Subtract the total weight of the blue, pink, and yellow beads from the total weight of the jar (18 grams).
18 grams (total weight) - 14.5 grams (blue, pink, and yellow beads) = 3.5 grams
You can read more about probability at https://brainly.com/question/13604758

#SPJ11

The correct statement regarding the solution to the system of equations is given as follows:

b. Infinite solutions.

The system of equations in the context of this problem is defined as follows:

Replacing the second equation into the first, the value of x is obtained as follows:

3(8 + 2x) - 6x = 24

24 + 6x - 6x = 24

24 = 24.

24 = 24 is a statement that is always true, hence the system has an infinite number of solutions, and thus option B is the correct option for this problem.

More can be learned about a system of equations at https://brainly.com/question/13729904

#SPJ1

Answer: x = 47

Step-by-step explanation:

45 + x = (2x - 2)

add 2 to both sides

47 + x = 2x

subtract x on both sides

47 = x

Converting time from the 12-hour clock format to the 24-hour clock format, and vice versa, can be a bit confusing at times, but it's not that difficult once you know how to do it.

To convert from the 12-hour clock format to the 24-hour clock format, simply add 12 hours to any time after 12:00 p.m. For example, if it's 3:00 p.m., you add 12 hours to get 15:00 (3:00 p.m. in 24-hour format). If it's 11:00 p.m., you add 12 hours to get 23:00 (11:00 p.m. in 24-hour format).

Conversely, to convert from the 24-hour clock format to the 12-hour clock format, simply subtract 12 hours from any time after 12:00 p.m. For example, if it's 16:00 (4:00 p.m.) in 24-hour format, you subtract 12 hours to get 4:00 a.m. in the 12-hour format. If it's 22:00 (10:00 p.m.) in 24-hour format, you subtract 12 hours to get 10:00 a.m. in the 12-hour format.

To help you with these conversions, here is a table with some examples:

| 12-hour clock format | 24-hour clock format |
|---------------------|---------------------|
| 12:00 a.m.          | 00:00               |
| 1:00 a.m.           | 01:00               |
| 2:00 a.m.           | 02:00               |
| 3:00 a.m.           | 03:00               |
| 4:00 a.m.           | 04:00               |
| 5:00 a.m.           | 05:00               |
| 6:00 a.m.           | 06:00               |
| 7:00 a.m.           | 07:00               |
| 8:00 a.m.           | 08:00               |
| 9:00 a.m.           | 09:00               |
| 10:00 a.m.          | 10:00               |
| 11:00 a.m.          | 11:00               |
| 12:00 p.m.          | 12:00               |
| 1:00 p.m.           | 13:00               |
| 2:00 p.m.           | 14:00               |
| 3:00 p.m.           | 15:00               |
| 4:00 p.m.           | 16:00               |
| 5:00 p.m.           | 17:00               |
| 6:00 p.m.           | 18:00               |
| 7:00 p.m.           | 19:00               |
| 8:00 p.m.           | 20:00               |
| 9:00 p.m.           | 21:00               |
| 10:00 p.m.          | 22:00               |
| 11:00 p.m.          | 23:00               |

In conclusion, converting time from the 12-hour clock format to the 24-hour clock format and vice versa is an essential skill to have, especially for those who work in industries that require precise timing. With a bit of practice, anyone can easily master this skill and use it effectively in their day-to-day lives.

To know more about 12-hour clock format refer here

https://brainly.com/question/23719804#

#SPJ11

The surface area of the hexagonal pyramid is 75240 square millimeters to the nearest square millimeter.

The surface area of the hexagonal pyramid can be calculated by finding the sum of the areas of its faces. The hexagonal pyramid has a base with six equal sides of length 44 millimeters, and six identical triangular faces with a height of 95 millimeters.

Each triangular face is an isosceles triangle, with two sides of length 44 millimeters and a base of length equal to the perimeter of the hexagonal base, which is 6 times 44 millimeters, or 264 millimeters.

To calculate the area of each triangular face, we can use the formula for the area of an isosceles triangle, which is (base x height) / 2. Substituting the values we have, we get: Area of each triangular face = (264 x 95) / 2 = 12540 square millimeters

Since the hexagonal pyramid has six identical triangular faces, we can multiply the area of one triangular face by 6 to get the total surface area of the pyramid: Total surface area = 6 x 12540 = 75240 square millimeters.

Learn more about hexagonal pyramid here:

https://brainly.com/question/14010690

#SPJ4

The  volume of the region U is 16π cubic units.

To find the volume of the region U, we can use cylindrical coordinates. In cylindrical coordinates, a point in space is represented by the coordinates (r, θ, z), where r is the distance from the z-axis, θ is the angle between the x-axis and the projection of the point onto the xy-plane, and z is the height above the xy-plane.

In this case, the region U is defined by 0 ≤ r ≤ 2, 0 ≤ θ ≤ 2π, and 0 ≤ z ≤ 12 - r sin(θ).

To find the volume of U, we can integrate over the cylindrical coordinates. The volume of U is given by the integral:

V = ∫∫∫_U dV

where dV = r dz dr dθ is the volume element in cylindrical coordinates.

Substituting in the limits of integration, we have:

V = ∫₀²π ∫₀² ∫₀^(12-rsinθ) r dz dr dθ

Integrating with respect to z, we get:

V = ∫₀²π ∫₀² r(12-rsinθ) dr dθ

Integrating with respect to r, we get:

V = ∫₀²π [(6r² - (1/3)r³sinθ)] from r=0 to r=2 dθ

Simplifying, we get:

V = ∫₀²π [(24 - 16/3 sinθ)] dθ

Integrating, we get:

V = [24θ + 16/3 cosθ] from θ=0 to θ=2π

Simplifying, we get:

V = 48π/3 = 16π

Therefore, the volume of the region U is 16π cubic units.
Visit to know more about volume:-

https://brainly.com/question/463363

#SPJ11

If he visited all the cities in order A(O,4), B(4,1). C(3. 1) and D(-1. 2). then he traveled 12.3 units distance ( nearest tenth).

John visited four cities that form a rectangle on a coordinate grid at A(0, 4), B(4, 1), C(3, 1), and D(-1, 2). If he visited all the cities in order and ended up where he started, the distance he traveled can be found by calculating the perimeter of the rectangle.

Calculate the distance between consecutive points.
AB = √[(4-0)^2 + (1-4)^2] = √[16 + 9] = √25 = 5
BC = √[(3-4)^2 + (1-1)^2] = √[1 + 0] = √1 = 1
CD = √[(-1-3)^2 + (2-1)^2] = √[16 + 1] = √17 ≈ 4.1 (rounded to nearest tenth)
DA = √[(0-(-1))^2 + (4-2)^2] = √[1 + 4] = √5 ≈ 2.2 (rounded to nearest tenth)

Calculate the total distance traveled (perimeter of the rectangle).
Total Distance = AB + BC + CD + DA = 5 + 1 + 4.1 + 2.2 = 12.3

learn more about: Distance between two points - https://brainly.com/question/7243416

#SPJ11

A. angle CXD = 140 degrees

Angle XCD and Angle XDC are congruent since the triangle is isosceles. Remember that the sum of the interior angles of a triangle is 180 degrees.

20 + 20 + x = 180

x = 140

B. 18 sides

To find the number of sides of the polygon, we need to know the measure of one interior angle. One interior angle is angle BCD. We can easily find the measure of this angle because it is on a straight angle of which we are given part of (angle XCD).

Angle XCD + Angle BCD = 180

20 + BCD = 180

BCD = 160

Now that we know the measure of an interior angle, we can use the formula to find the measure of an interior angle and algebraically solve for the number of sides.

[ (n - 2) x 180 ] / n = 160

(n - 2) x 180 = 160n

180n - 360 = 160n

-360 = -20n

n = 18 sides

C. 2880 degrees

The formula for the sum of the interior angles of a regular polygon is (n - 2) x 180, where n is the number of sides.

(18 - 2) x 180

16 x 180

2880

D. 140 degrees

If angle XCD is 20 degrees, then angle BED is also 20 degrees. Angle BED and Angle BEF make up one of the interior angles of the regular polygon. We know that one interior angle is equal to 160 degrees.

Angle BED + Angle BEF = 160

20 + BEF = 160

BEF = 140

Hope this helps!

The basal area of the tree after 10 years of growth would be approximately 279.7 square inches.

Given the initial basal area of a tree, which is 154 square inches, and the annual growth rate, which is 6%. To find out what the basal area of the tree will be after 10 years of growth.

By using the formula for compound interest, which can be applied to the growth of the basal area over time. The formula is:

A = P(1 + r)ⁿ

where:

A is the final amount

P is the initial amount

r is the annual growth rate

n is the number of years

To find A, the final basal area of the tree after 10 years of growth. We know that P is 154 square inches, r is 6% or 0.06 and n is 10.

By applying these values in the formula, we get:

A = 154(1 + 0.06)¹⁰

A = 154(1.06)¹⁰

A = ≈ 279.7

Therefore, the basal area of the tree after 10 years of growth would be approximately 279.7 square inches.

To know more about basal area here

https://brainly.com/question/27784309

#SPJ4

Mrs. Davis travelled a total of 553 miles.

This can be calculated as:

Distance covered when she flew from Atlanta to Washington d.c.= 547 miles

Distance covered when she rented a car and drove to Baltimore = 6 miles.

Therefore, total miles can simply be calculated as:

Distance covered when she flew from Atlanta to Washington d.c + Distance covered when she rented a car and drove to Baltimore = 547miles+ 6 miles

                                                                                             = 553 miles

Hence, the total miles Mrs. davis travelled is equal to 553 miles.

To know about distance related problems:

https://brainly.com/question/27640162

#SPJ4