Using the formula m1v1=m2v2 , you have a 0.5 m mgso4 stock solution available.
calculate the volume of the stock solution needed to make 2.0 l of 0.20m mgso4.
0.5 l
04.0l
0.9 l
kid 0.8 l

When, we perform a reaction with 5. 00 g of MnO₂ and 5. 00 g of H₂SO₄, then, 6.30 g of Mn(SO₄)₂ will be formed. Option, A is correct.

To solve this problem, we need to use stoichiometry to calculate the amount of Mn(SO₄)₂ formed from the given amount of MnO₂ and H₂SO₄.

First, we calculate number of moles of each reactant;

moles of MnO₂ =5.00 g / 86.9368 g/mol

= 0.0574 mol

moles of H₂SO₄ = 5.00 g / 98.0785 g/mol

= 0.0509 mol

From the balanced chemical equation, we can see that 1 mole of MnO₂ reacts with 2 moles of H₂SO₄ to produce 1 mole of Mn(SO₄)₂. Therefore, the limiting reactant is H₂SO₄, since it is present in a smaller amount than what is required to react with all of the MnO₂.

The amount of Mn(SO₄)₂ formed is limited by the amount of H₂SO₄, so we can calculate the amount of Mn(SO₄)₂ formed based on the number of moles of H₂SO₄;

moles of Mn(SO₄)₂ = 0.0509 mol H₂SO₄ × (1 mol Mn(SO₄)₂ / 2 mol H₂SO₄) = 0.0255 mol Mn(SO₄)₂

Finally, we can calculate the mass of Mn(SO₄)₂ formed using its molar mass;

mass of Mn(SO₄)₂ = 0.0255 mol × 247.0632 g/mol

= 6.307 g

Therefore, total 6.30 g of Manganese(II) sulfate will form.

Hence, A. is the correct option.

To know more about Manganese(II) sulfate here

https://brainly.com/question/8695145

#SPJ4

The statement that reflects a central theme of the atomists is: Atomists would agree that a butterfly and a caterpillar exist as a collection of atoms, but their atoms are organized differently.

Atomists believe that everything in the universe is composed of small, indivisible particles called atoms. They assert that the properties of objects, like a butterfly and a caterpillar, are determined by the arrangement and organization of these atoms.

While a butterfly and a caterpillar may share similar atoms, their unique characteristics are due to the differences in how these atoms are arranged within each organism.

This perspective acknowledges the transformation from a caterpillar to a butterfly as a process of reorganization of atoms, rather than the creation or destruction of matter.

To know more about Atomists click on below link:

https://brainly.com/question/5397458#

#SPJ11

The dimensions of the pool table with a perimeter of 26 feet and an area of 40 square feet are either 5 feet by 8 feet or 8 feet by 5 feet.

To solve this problem, we need to use some basic geometry formulas. Let's start by using the formula for the perimeter of a rectangle, which is P = 2l + 2w, where l is the length and w is the width.

We know that the perimeter of the pool table is 26 feet, so we can write the equation:

26 = 2l + 2w

Simplifying this equation, we get:

13 = l + w

Next, we can use the formula for the area of a rectangle, which is A = lw, where A is the area.

We know that the area of the pool table is 40 square feet, so we can write the equation:

40 = lw

Now we can use substitution to solve for one of the variables. We can rearrange the perimeter equation to solve for one variable in terms of the other:

l = 13 - w

Then we can substitute this expression for l into the area equation:

40 = (13 - w)w

Expanding this equation, we get:

40 = 13w - w^2

Rearranging and simplifying, we get a quadratic equation:

w^2 - 13w + 40 = 0

We can solve this equation by factoring or using the quadratic formula, which gives us:

w = 5 or w = 8

If w is 5, then l is 8 (using the perimeter equation), and if w is 8, then l is 5. So the dimensions of the pool table are either 5 feet by 8 feet or 8 feet by 5 feet.

In summary, the dimensions of the pool table with a perimeter of 26 feet and an area of 40 square feet are either 5 feet by 8 feet or 8 feet by 5 feet.

To know more about perimeter, visit:

https://brainly.com/question/6465134#

#SPJ11

0.0228 mol/kg is the molality of a solution containing 4. 0 grams of NaCl dissolved in 3000 grams of water.

To calculate the molality of a solution, we need to first convert the mass of the solute (NaCl) to moles and then divide by the mass of the solvent (water) in kilograms.

The molar mass of NaCl is 58.44 g/mol, so 4.0 grams of NaCl is equal to 0.0684 moles of NaCl.

The mass of water is 3000 grams or 3.0 kg.

Therefore, the molality of the solution is:

molality = moles of solute / mass of solvent in kg

molality = 0.0684 moles / 3.0 kg

molality = 0.0228 mol/kg

So the molality of the solution is 0.0228 mol/kg.

To know more about the molality refer here :

https://brainly.com/question/4580605#

#SPJ11

There are 516.682 grams in a sample of 7.9 moles of zinc.

To determine the number of grams in a sample of 7.9 moles of zinc, we need to use the molar mass of zinc. The molar mass of zinc is 65.38 g/mol.

Therefore, to calculate the number of grams in 7.9 moles of zinc, we can multiply 7.9 moles by 65.38 g/mol. The calculation is as follows:

7.9 moles x 65.38 g/mol = 516.682 g

Therefore, there are 516.682 grams in a sample of 7.9 moles of zinc. It's important to remember to always use the molar mass of the element or compound when converting between moles and grams.

To know more about moles refer here: https://brainly.com/question/31563792#

#SPJ11

The mass of the ancient gold medallion is 360 grams.

To calculate the mass of the gold medallion, we need to use the specific heat capacity of gold, which is 0.129 J/g°C. We also need to know the initial temperature of the medallion.

Let's assume the initial temperature of the gold medallion is 20.0°C (room temperature). The heat absorbed by the gold medallion can be calculated using the following formula:

Q = m * c * ΔT

Substituting the given values, we get:

576 J = m * 0.129 J/g°C * 25.0°C

Solving for m, we get:

m = 360 g

To know more about heat capacity, here

brainly.com/question/29766819

#SPJ4

The reaction that undergoes a condensation reaction to produce CH₃CH₂OCH₂CH₃ is the reaction is involving 2CH₃CH₂OH  which is Option D.

The reason behind this is that the reaction between these two compounds is an example of a nucleophilic substitution reaction which includes the replacement or taking over of a leaving group (in this case Br) by a nucleophile (in this case OH) . The reaction projects van SN2 reaction mechanism.

SN2 reaction mechanism refers to the  type of reaction mechanism that is very common in organic chemistry. Inside this mechanism, one bond is broken and dismantled and one bond is formed in a concerted way.

The SN2 reaction mechanism includes the nucleophilic substitution reaction of the leaving group (which generally consists of halide groups or other electron-withdrawing groups) with a nucleophile in a given organic compound .

To learn more about SN2 reaction mechanism

https://brainly.com/question/14150949

#SPJ1

At standard temperature and pressure (STP), 1 mole of any gas occupies 22.4 L of volume. Therefore, 8.19 L of gas at STP represents 0.364 moles and 21.7 L of gas at STP represents 0.969 moles.

Moles are a unit of measurement for the amount of matter present in an object. The number of moles in an object is proportional to the amount of matter present, and it is calculated by dividing the mass of an object by its molar mass. The molar mass of a substance is its molecular mass expressed in grams.

At STP, the number of moles of a gas in a given volume can be calculated by dividing the volume of the gas (in liters) by 22.4. This is because 1 mole of any gas occupies 22.4 L of volume at STP. Therefore, by dividing the volume of the gas by 22.4, the number of moles of gas is obtained.

Know more about Molar mass here

https://brainly.com/question/22997914#

#SPJ11

At aphelion, when the planet is farthest from the Sun, its velocity is the slowest in its orbit. Conversely, at perihelion, the point in the orbit where the planet is closest to the Sun, the planet moves fastest.

A planet moves most slowly in its orbit at aphelion. Aphelion refers to the point in a planet's orbit where it is farthest from the Sun.

As a planet orbits the Sun, it experiences gravitational attraction, causing it to accelerate as it gets closer to the Sun and decelerate as it moves away.

Aphelion refers to the point in an object's orbit around the Sun where it is farthest from the Sun. It is the point in an object's elliptical orbit where the distance between the object and the Sun is at its maximum.

To learn more about aphelion, follow the link:

https://brainly.com/question/30583998

#SPJ12

We can use the formula Q = mcΔT to solve this problem, where Q is the amount of heat absorbed by the aluminum, m is the mass of the aluminum, c is its specific heat capacity, and ΔT is the change in temperature.

However, since we are not given the mass of the aluminum, we cannot solve for ΔT directly using this formula.

Instead, we can use the fact that the specific heat capacity of aluminum is given as 314 j/°c, which means that it takes 314 j of heat to raise the temperature of 1 gram of aluminum by 1 degree Celsius.

To find the mass of the aluminum, we can divide the total amount of heat absorbed by the specific heat capacity of aluminum:

m = Q / (c * ΔT)

Solving for ΔT, we get:

ΔT = Q / (m * c)

Substituting the given values, we have:

ΔT = 8,291 j / (m * 314 j/°c)

We need to find the value of ΔT, so we still need to solve for m. Without additional information, we cannot do so directly.

Therefore, we cannot provide a numerical answer to this problem without knowing the mass of the aluminum.

To know more about aluminum refer here

https://brainly.com/question/28989771#

#SPJ11

The percent yield for the reaction is approximately is 65.12%.

To calculate the percent yield, we need to first find the theoretical yield and then compare it to the actual yield. Here's the solution:

1. Calculate the moles of Cl2:
52 g Cl2 * (1 mol Cl2 / 70.9 g Cl2) = 0.733 mol Cl2

2. Use the stoichiometry of the balanced equation:
(0.733 mol Cl2) * (2 mol AlCl3 / 3 mol Cl2) = 0.489 mol AlCl3

3. Find the theoretical yield:
(0.489 mol AlCl3) * (133.3 g AlCl3 / 1 mol AlCl3) = 65.2 g AlCl3 (theoretical yield)

4. Calculate the percent yield:
(42.5 g AlCl3 (actual yield) / 65.2 g AlCl3 (theoretical yield)) * 100 = 65.12%

The percent yield for the reaction is approximately 65.12%.

Know more about Percent Yield here:

https://brainly.com/question/1704278

#SPJ11

Answer:

Carbon and silicon are both in Group 14 of the periodic table, which means they have similar electronic configurations and therefore similar bonding properties. However, the difference in melting and sublimation temperatures of their oxides, silicon oxide and solid carbon dioxide, respectively, can be attributed to differences in their structure and bonding.

Silicon oxide (SiO2) has a giant covalent structure, in which each silicon atom is covalently bonded to four oxygen atoms and each oxygen atom is covalently bonded to two silicon atoms. This gives rise to a three-dimensional network of strong covalent bonds, which requires a large amount of energy to be broken. Therefore, silicon oxide has a high melting point of 2440°C because a lot of energy is required to overcome the strong covalent bonds and melt the solid.

On the other hand, solid carbon dioxide (CO2) has a molecular structure, in which each carbon atom is double bonded to two oxygen atoms. The carbon dioxide molecules are held together by weak intermolecular forces, such as Van der Waals forces, which are much weaker than the strong covalent bonds present in silicon oxide. As a result, solid carbon dioxide can sublime at -70°C, without melting into a liquid, because the intermolecular forces can be overcome by relatively low energy input.

In summary, the difference in melting and sublimation temperatures of silicon oxide and solid carbon dioxide can be explained by the difference in their bonding types and structures. Silicon oxide has a giant covalent structure with strong covalent bonds that require a large amount of energy to break, resulting in a high melting point. Solid carbon dioxide has a molecular structure held together by weak intermolecular forces, which can be overcome by relatively low energy input, resulting in a low sublimation point.

The solution has a Molarity of approx 0.01575 M.

To calculate the molarity of a solution, we use the formula:

Molarity (M) = moles of solute ÷ volume of solution in liters

First, we need to convert the volume of the solution from milliliters to liters:

Volume of solution = 400 mL = 400/1000 L = 0.4 L

Next, we need to calculate the moles of solute:

moles of solute = 6.3 x [tex]10^{-3[/tex] mol

Substituting these values into the formula, we get:

Molarity (M) = 6.3 x[tex]10^{-3[/tex] mol ÷ 0.4 L = 0.01575 M

Therefore, the molarity of the solution is 0.01575 M.

To know more about Molarity, here

brainly.com/question/8732513

#SPJ4

Answer:

0.08 atm

Explanation:

The pressure change of a gas at constant volume can be determined using the ideal gas law:

PV = nRT

Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

Since the volume is constant, we can simplify the ideal gas law to:

P = (nRT) / V

The number of moles and the gas constant are constant for a given sample of gas, so we can further simplify to:

P1 / T1 = P2 / T2

Where P1 and T1 are the initial pressure and temperature, and P2 and T2 are the final pressure and temperature.

Plugging in the given values:

P1 = 2.50 atm

T1 = 30.0 + 273.15 = 303.15 K

T2 = 40.0 + 273.15 = 313.15 K

P2 = (P1 * T2) / T1

P2 = (2.50 atm * 313.15 K) / 303.15 K

P2 = 2.58 atm

Therefore, the pressure change when a constant volume of gas at 2.50 atm is heated from 30.0 °C to 40.0 °C is 0.08 atm (2.58 atm - 2.50 atm).

Answer:

Explanation: 0.08

Turtle refuges are usually created on beaches where turtles lay their eggs, hatch, and return to the sea. Therefore, beaches that are known as nesting grounds for sea turtles may be suitable for creating a turtle refuge.

In general, turtle nesting sites are characterized by sandy beaches, dunes, and undisturbed vegetation. Female sea turtles come ashore to lay their eggs on sandy beaches, and the hatchlings make their way to the ocean once they emerge from the nest.

Turtle refuges provide protection for these nesting sites, allowing the turtles to lay their eggs and for the hatchlings to safely make their way to the ocean.

It is important to note that the location of a turtle refuge should be based on careful research and consideration of a variety of factors, such as the species of turtles that inhabit the area, the presence of human and natural threats to the nesting sites, and the availability of resources and support for the conservation efforts.

For more question on Turtle click on

https://brainly.com/question/26173544

#SPJ11

To determine whether a powdered cement is an acid or an alkali, you can perform a simple pH test using litmus paper or a pH meter.

Acids have a pH value below 7, whereas alkalis have a pH value above 7.

To conduct a pH test using litmus paper, moisten the paper with water, then sprinkle a small amount of the powdered cement onto the paper. The paper will change color based on the pH of the cement. If the paper turns red, the cement is acidic. If it turns blue, the cement is alkaline.

Alternatively, you can use a pH meter to measure the pH of a solution made by mixing a small amount of the powdered cement with water. If the pH is less than 7, the cement is acidic, and if it is greater than 7, the cement is alkaline.

It is important to note that most types of cement are typically slightly alkaline, with a pH value between 8 and 9.5, due to the presence of calcium oxide and other alkali metal oxides in the cement.

To know more about pH test, refer here:

https://brainly.com/question/29551790#

#SPJ11

1. Positive feedback loops amplify or increase changes, while negative feedback loops counteract or reduce changes.

2. The main difference between endocrine and exocrine glands is that endocrine glands secrete hormones directly into the bloodstream, while exocrine glands secrete substances through ducts.

3. When blood glucose levels decline, the pancreas' alpha cells release glucagon, which signals the liver to break down glycogen into glucose, promotes gluconeogenesis, and releases glucose into the bloodstream.

4. Both type I and type II diabetes can result in impaired vision or blindness due to high blood sugar damaging blood vessels in the retina.

5. To determine if a patient has Cushing's, type I diabetes, or type II diabetes, check for cortisol levels (Cushing's), insulin levels, and blood sugar levels (diabetes).

1. An example of a positive feedback loop is oxytocin release during childbirth from the posterior pituitary gland. An example of a negative feedback loop is the regulation of thyroid hormones by the thyroid gland, where a decrease in hormone levels triggers the release of more hormones.

2. Endocrine glands are part of the endocrine system, while exocrine glands are not, due to their use of ducts for secretion.

3. The ultimate use of this glucose is to provide energy for the body.

4. Type II diabetes doesn't turn into type I diabetes as they are distinct conditions.

5. Additional tests may include glucose tolerance and autoimmune marker tests.

To know more about endocrine glands click on below link:

https://brainly.com/question/9194966#

#SPJ11

Answer: 4.08 x 10^25 molecules

Explanation:

1 mole of a substance contains 6.022×10^23 molecules/atoms of that substance.

therefore:

67.8 x (6.022x10^23) = 4.08x10^25 molecules of helium

To solve this problem, we need to use the volume ratio from the balanced chemical equation. The ratio tells us that for every 3 liters of [tex]H_2[/tex] that reacts, 2 liters of [tex]NH_3[/tex] are produced.

In this case, we have 3.6 liters of [tex]H_2[/tex]  reacting, so we can set up a proportion:

3 L [tex]H_2[/tex]  : 2 L [tex]NH_3[/tex] = 3.6 L [tex]H_2[/tex]  : x L [tex]NH_3[/tex]

To solve for x (the amount of NH3 produced), we can cross-multiply:

3 L [tex]H_2[/tex]  * x L [tex]NH_3[/tex] = 2 L [tex]NH_3[/tex] * 3.6 L [tex]H_2[/tex]  

Simplifying, we get:

x = (2 L [tex]NH_3[/tex] * 3.6 L [tex]H_2[/tex] ) / 3 L [tex]H_2[/tex]  

x = 2.4 L [tex]NH_3[/tex]

Therefore, the answer is 2.4 liters of [tex]NH_3[/tex] produced if 3.6 liters of [tex]H_2[/tex]  reacts with an excess of [tex]N_2[/tex].

To know more about balanced chemical equation:
https://brainly.com/question/11904811

#SPJ11

The heat energy transferred to 2.3g of copper is 133.01 J.

To calculate the heat energy transferred to the copper, we can use the formula:

q = mcΔT

where q is the heat energy transferred, m is the mass of the substance (2.3 g), c is the specific heat capacity (0.385 J/g·°C), and ΔT is the change in temperature (174.0°C - 23.0°C).

And;

ΔT = 174.0°C - 23.0°C = 151.0°C

Now, plug the values into the formula:

q = (2.3 g) × (0.385 J/g·°C) × (151.0°C)

q = 133.0085 J

Round the answer to two decimal places:

q = 133.01 J

To know more about specific heat capacity, click below.

https://brainly.com/question/22729342

#SPJ11

To determine the empirical formula of the compound, we need to first find the moles of each element present in the compound:

moles of Al = 94.5 g / 26.98 g/mol = 3.50 mol

moles of F = 199.5 g / 18.99 g/mol = 10.50 mol

Next, we need to find the ratio of the moles of each element in the compound by dividing by the smallest number of moles. In this case, the smallest number of moles is 3.50 mol:

moles of Al = 3.50 mol / 3.50 mol = 1

moles of F = 10.50 mol / 3.50 mol = 3

The empirical formula of the compound is therefore AlF3.

To know more about empirical refer here

https://brainly.com/question/977538#

#SPJ11

A chemist interested in the efficiency of a chemical reaction would calculate the c. percentage yield.

The percentage yield compares the actual yield of a reaction to the theoretical yield and indicates how efficient the reaction is in producing the desired product. It is calculated by dividing the actual yield by the theoretical yield and multiplying by 100 to express it as a percentage.

The other options listed are also important measurements in chemistry but are not directly related to assessing the efficiency of a reaction:

a. Mole ratio: The mole ratio is a ratio that indicates the stoichiometric relationship between the reactants and products in a chemical reaction. It is used to determine the relative amounts of substances involved in a reaction, but it does not directly measure the efficiency of the reaction.

b. Energy released: This refers to the energy that is released or absorbed during a chemical reaction. While energy considerations are important, they do not directly measure the efficiency of the reaction.

d. Rate of reaction: The rate of reaction refers to how quickly a chemical reaction occurs, which is an important factor but not the direct measurement of efficiency. The rate of reaction can be influenced by factors such as temperature, concentration, and catalysts, but it does not provide information about the overall efficiency of the reaction in terms of yield.

To know more about the chemical reaction refer here :

https://brainly.com/question/29039149#

#SPJ11

Complete question :

A chemist interested in the efficiency of a chemical reaction would calculate the :

a. mole ratio.

b. energy released.

c. percentage yield.

d. rate of reaction.

The number of mole of the remaining reactants and products are

We must recognize that reactants are located on the left side of a chemical equation while the products are located on the right side.

With the above information in mind, we shall determine the mole of the reactants and products. This is illustrated below:

4NH₃(g) + 3O₂(g) → 2N₂(g) + 6H₂O(l)

Reactants:

Products

Thus, the moles of the remaining reactants and products are:

Learn more about mole:

https://brainly.com/question/18265914

#SPJ1

Answer:

Molecular weight of CH4 is 16 CH4 has four hydrogen atoms 1 mole of a compound contain 6.023*1023 atoms 12 gm of CH4 = 0

The heat of a reaction may be found with the equation q=mcΔT. A 56. 8g sample of aluminum is heated from 79. 5°C to 143. 7°C. The specific heat capacity of aluminum is 0. 900 J/(g*K).  The heat absorbed is C) 6220J.

The heat absorbed can be calculated using the formula q=mcΔT, where q is the heat absorbed, m is the mass of the sample, c is the specific heat capacity of the substance, and ΔT is the change in temperature.

Substituting the given values, we get:

q = (56.8 g) x (0.900 J/(g*K)) x (143.7°C - 79.5°C)

q = 6220 J

Therefore, the heat absorbed is 6220 J, and the answer is option C. This means that 6220 Joules of energy is required to heat a 56.8 gram sample of aluminum from 79.5°C to 143.7°C, assuming a specific heat capacity of 0.900 J/(g*K).

To know more about the heat of a reaction refer here :

https://brainly.com/question/30464598#

#SPJ11

The pH of the final solution will be equal to 7.

When 100 mL of 0.40 M hydrofluoric acid (a weak acid) is mixed with 100 mL of 0.40 M lithium hydroxide (a strong base), the reaction can be represented as:

HF + LiOH → LiF + H₂O

As both solutions have equal concentrations and volumes, they will completely neutralize each other. The product, LiF, is a soluble salt and will dissociate into Li+ and F- ions in water.

Since the number of moles of H+ and OH- ions is the same in the reaction, they will react to form water (H₂O), resulting in a neutral solution with a pH of 7. The formation of water from equal amounts of H⁺ and OH⁻ ions indicates that the solution is neither acidic nor basic, thus leading to a pH of 7.

To know more about weak acid click on below link:

https://brainly.com/question/22104949#

#SPJ11

Science Inquiry of Lemon Juice:

Scientific Method of Lemon Juice:

The scientific method of lemon juice involves the following steps:

Draw conclusions: Based on the data analysis, draw conclusions about the hypothesis.

Integrating Design Thinking in SIP of Lemon Juice:

The steps in conducting the Science Inquiry Process (SIP) of lemon juice are as follows:

Lastly, Communicate the results of the investigation through a scientific report or presentation.

Read more about Science Inquiry here:

https://brainly.com/question/1828853

#SPJ1

The type of conversion that would be required to determine how many liters 26 grams of water is would be a conversion from mass to volume. This is because grams are a unit of mass, while liters are a unit of volume. In order to make this conversion, it is necessary to know the density of water, which is approximately 1 gram per milliliter at room temperature and atmospheric pressure.

To convert 26 grams of water to liters, we need to divide the mass by the density. This gives us:

26 grams / 1 gram per milliliter = 26 milliliters
Since there are 1000 milliliters in a liter, we can further convert this to liters by dividing by 1000:
26 milliliters / 1000 = 0.026 liters

Therefore, 26 grams of water is equivalent to 0.026 liters of water.

In summary, to determine the volume of a given mass of water, we need to use the density of water as a conversion factor. This involves dividing the mass by the density to obtain the volume in milliliters, and then converting this to liters by dividing by 1000.

To know more about mass refer here

https://brainly.com/question/19694949#

#SPJ11

The first step in this investigation will be to select several substances to test. It is important to choose substances that have similar chemical composition but differ in physical properties.

Once the substances have been selected, the next step is to measure the single property across each of the substances. This can be done through a variety of methods, such as using a thermometer to measure boiling points or a microscope to measure surface tension.

After the data has been collected, it should be compared and analyzed to determine how the property is related to the strength of the electrical forces in the substance. By comparing the data and making inferences, it is possible to determine how properties of substances can indicate the strength of the electrical forces within those substances.

Know more about Thermometer here

https://brainly.com/question/24189042#

#SPJ11