Answer:
x = 33.52 amu
Explanation:
It is given that,
Isotope A has a mass of 34 amu and an abundance of 52%, isotope B has a mass of 33 amu and an abundance of 48%.
Let x is the average atomic mass of this element. It can be calculated as follows :
[tex]x=52\%\ \text{of}\ 34+48\%\ \text{of}\ 33\\\\x=\dfrac{52}{100}\times 34+\dfrac{48}{100}\times 33\\\\x=0.52\times 34+0.48\times 33\\\\x=33.52\ \text{amu}[/tex]
So, the average atomic mass of this element is 33.52 amu.
Enough of a monoprotic weak acid is dissolved in water to produce a 0.0129 M solution. The pH of the resulting solution is 2.65 . Calculate the Ka for the acid.
Answer:
Ka = 4.70x10⁻⁴M
Explanation:
The general dissociation of a weak acid, HX, is:
HX(aq) ⇄ H⁺(aq) + X⁻(aq)
And Ka is written as:
Ka = [H⁺] [X⁻] / [HX]
Where [] represents the molar concentration in equilibrium of each specie.
The equilibrium is reached when X of HX is dissociate in X H⁺ and X X⁻, that is:
[HX] = 0.0129M - X
[H⁺] = X
[X⁻] = X
As pH = -log [H⁺]:
10^-pH = [H⁺] = X = 2.239x10⁻³M
Solving:
[HX] = 0.0129M - 2.239x10⁻³M = 0.01066M
[H⁺] = 2.239x10⁻³M
[X⁻] = 2.239x10⁻³M
Ka = [H⁺] [X⁻] / [HX]
Ka = [2.239x10⁻³M] [2.239x10⁻³M] / [0.01066M]
Ka = 4.70x10⁻⁴M
12. In which layer of the sun do sunspots form?
A. Corona
B. Core
C. Convection zone
O D. Photosphere
Answer:
D
Explanation:
Photosphere is the layer where sunspots form.
Photosphere is the layer where sunspots form.
What is Photosphere?The Sun is made up of layers of material, like a baseball or rubber band ball. The photosphere is the lowest layer of the solar atmosphere. It is essentially the solar "surface" that we see when we look at the Sun in "white" (i.e. regular, or visible) light.
Like the Sun, our planet, Earth, is made up of layers, too. The thickest or most dense material on the Earth is in the very middle of our planet -- the core.
The thinnest is at the very top of our atmosphere - right next to outer space. The same is true of the Sun. But, the layers in the Sun and the Earth are much different.
Therefore, Photosphere is the layer where sunspots form.
To learn more about Photosphere, refer to the link:
https://brainly.com/question/29127538
#SPJ5
what is the first step in the scientific inquiry process
Answer:
make an observation that describes a problem
Explanation:
Answer:
The first step in the Scientific Method is to make objective observations.
Explanation:
....-
Assume that silver and gold form ideal, random mixtures. Calculate the mass of pure Ag needed to cause an entropy increase of 20 J/K when mixed with 100g of pure Au
Answer:
[tex]m_{Ag}=2,265.9g[/tex]
Explanation:
Hello!
In this case, since the definition of entropy in a random mixture is:
[tex]\Delta S=-n_TR\Sigma[x_i*ln(x_i)][/tex]
For this silver-gold mixture we write:
[tex]\Delta S=-(n_{Au}+n_{Ag})R\Sigma[\frac{n_{Au}}{n_{Au}+n_{Ag}} *ln(\frac{n_{Au}}{n_{Au}+n_{Ag}} )+\frac{n_{Ag}}{n_{Au}+n_{Ag}} *ln(\frac{n_{Ag}}{n_{Au}+n_{Ag}} )][/tex]
By knowing the moles of gold:
[tex]n_{Au}=100g*\frac{1mol}{197g} =0.508mol[/tex]
It is possible to write the aforementioned formula in terms of the variable [tex]x[/tex] representing the moles of silver:
[tex]20\frac{J}{mol}=-(0.508+x)8.314\frac{J}{mol*K} \Sigma[\frac{0.508}{0.508+x} *ln(\frac{0.508}{0.508+x} )+\frac{x}{0.508+x} *ln(\frac{x}{0.508+x} )][/tex]
Which can be solved via Newton-Raphson or a solver software, in this case, I will provide you the answer:
[tex]x=n_{Ag}=21.0molAg[/tex]
So the mass is:
[tex]m_{Ag}=21.0mol*\frac{107.9g}{1mol}\\ \\m_{Ag}=2,265.9g[/tex]
Best regards!
What is the main function of the muscular system A. digestion B. breathing C.movement D. Eliminating
Answer:
C, Movement
Explanation:
What is the mass in grams of 2.5 moles of Al?
Answer:
One mole of Al weighs 27g.
2.5 moles of Al weigh 67.5g.
The solubility of limestone, CaCO3, at 25˚C is 0.00067 g/100 mL. Write the chemical equation for the solubility equilibrium of this sparingly soluble salt in water. Then compute the molar solubility and the solubility product constant Ksp for CaCO3 at 25˚C.
Answer:
4.5 × 10⁻⁹
Explanation:
Step 1: Write the reaction for the solution of CaCO₃
CaCO₃(s) ⇄ Ca²⁺(aq) + CO₃²⁻(aq)
Step 2: Convert the solubility of CaCO₃ from g/L to mol/L
We will use the following conversion factors:
The molar mass of CaCO₃ is 100.09 g/mol.1 L= 1000 mL.There are 0.00067 g of CaCO₃ per 100 mL of solution.[tex]\frac{0.00067 gCaCO_3}{100mLSol} \times \frac{1molCaCO_3}{100.09gCaCO_3} \times \frac{1000mLSol}{1LSol} = 6.7 \times 10^{-5} M[/tex]
Step 3: Calculate the solubility product constant (Ksp)
To relate Ksp and the molar solubility (S), we need to make an ICE chart.
CaCO₃(s) ⇄ Ca²⁺(aq) + CO₃²⁻(aq)
I 0 0
C +S +S
E S S
The solubility product constant is:
Ksp = [Ca²⁺].[CO₃²⁻] = S² = (6.7 × 10⁻⁵)² = 4.5 × 10⁻⁹
You are given an unknown mixture containing NaCl and NaHCO3. When you carry out the heating exactly as described in part A, only NaHCO3 decomposes. From the loss in mass, you can calculate the amount of NaHCO3 present in the mixture and its mass percent composition.
Here is your data. Incorporate it in your written procedure.
Experimental data Unknown (NaCl + NaHCO3)
Mass of crucible + cover 72.428 g
Mass of crucible + cover + mixture 74.80 g
Mass of crucible + cover + residue (1st heating) 74.25 g
Mass of crucible + cover + residue (2nd heating) 74.24 g
Mass of crucible + cover + residue (3rd heating) 74.24
From the data above, carry out your calculation for finding the mass of mixture, and mass of final solid remaining in the crucible. Using the knowledge that only loss of mass due to CO2 and H2O can be linked to the original mass of NaHCO3, calculate the mass of NaHCO3 and percent of NaHCO3 in the mixture.
Answer:
1.52g NaHCO3 were in the original mixture.
Mass percent: 64.1%
Explanation:
When NaHCO3 heats it descomposition occurs as follows:
2 NaHCO3(s) → Na2CO3(s) + CO2(g) + H2O(g).
The loss in mass is because of the evaporization of CO2 and H2O. As both are in the same porportion, its molar mass is the sum of both compounds (44g/mol + 18g/mol = 62g/mol)
Loss in mass: 74.80g - 74.24g = 0.56g.
In moles:
0.56g * (1mol / 62g) = 0.00903 moles of gas.
As 1 mole of the gases comes from 2 moles of NaHCO3:
Moles NaHCO3:
0.00903 moles of gas * (2 moles NaHCO3 / 1 mole gas) = 0.018 moles NaHCO3.
In grams (Molar mass NaHCO3: 84g/mol):
0.018 moles NaHCO3 * (84g / mol) = 1.52g NaHCO3 were in the original mixture.
The mass of the mixture was:
74.80g - 72.428g = 2.372g
That means mass percent of NaHCO3 is:
(1.52g / 2.372g) * 100 = 64.1%
How many distinct dichlorination products can result when isobutane is subjected to free radical chlorination?
a. 1
b. 2
c. 3
d. 4
e. 6
Answer:
c. 3
Explanation:
Dicholorination of tertiary alkane ( i.e. isobutane) is a halogenation reaction which makes it possible to replace the alkyl functional group with halogenated chlorine.
When Isobutane is subjected to free radicals chlorination, three distinct dichlorination can be formed.
The mechanism of the formation of these products can be seen in the image attached below.
What are the similarities between the adrenal hormone cortisone and the synthetic corticoid prednisone?
a. Both have a steroid nucleus
b. Both have 3 ketone groups
c. Both have 2 methyl
d. Both have 2 hydroxy group
e. Both have the same number of double bonds.
Answer:
Options a,b, c and d are correct
Explanation:
From the diagram attached in the picture below, They both have steroid nucleus since they have functional groups (such as the methyl and the ketone groups) that are spatially attached. It can also be deduced that both structures have three (3) ketone groups (CO/C=O), two (2) methyl groups (CH₃) and two (2) hydroxyl groups (OH). Hence, options a, b,c and d are correct.
However, cortisone has one (1) double bond while prednisone has two (2) double bonds.
Which compound would you expect to have the lowest boiling point?
a)CH3-CH2-CH2-CH2-CH2-CH3
b)CH3-CH2-OCH2-CH2-CH3
c)CH3-CH2-CH2-CH2-CH2-OH
d)CH3-CH2-OCH(CH3)2
e)CH3-OCH2-CH2-CH2-CH3
Answer:
d one is correct answer
Compounds are substances made by chemical bonding between elements and molecules. CH₃-CH₂-OCH(CH₃)₂ has the lowest boiling point. Thus, option D is correct.
What is the boiling point of a functional group?The boiling property and the functional group determine the property of the organic molecule. The boiling property of the molecules is defined by the intermolecular forces, the number of carbons (molecular mass), and branching.
The presence of functional groups like bonds (double and triple), carbonyl, halogens, and alcohol increases the boiling point of the substances. The given substances are:
CH₃-CH₂-CH₂-CH₂-CH₂-CH₃ - hexane (alkane)CH₃-CH₂-OCH₂-CH₂-CH₃ - ethoxyethane (ether)CH₃-CH₂-CH₂-CH₂-CH₂-OH - Pentan-1-ol (alcohol) CH₃-CH₂-OCH(CH₃)₂ - 2-ethoxypropane (ketone)CH₃-OCH₂-CH₂-CH₂-CH₃ - methyl propyl ether (ether)The order of boiling point is given as:
hexane (alkane)> ethoxyethane (ether)> methyl propyl ether (ether)> Pentan-1-ol (alcohol) > 2-ethoxypropane (ketone).
Therefore, option D. 2-ethoxypropane (ketone) has the least boiling point.
Learn more about boiling point, here:
https://brainly.com/question/10404354
#SPJ2
The potential energy of a roller coaster is 50 joules. The kinetic energy of the same coaster is 50 joules. What is the mechanical energy of the coaster? O joules 50 joules 100 joules
Answer:
100 joules
Explanation:
The mechanical energy (M.E) of an object describes the objects ability to do work. The mechanical energy encompasses the object's energy due to its position (potential energy) and its energy due to motion (kinetic energy).
Therefore,
M.E = K.E + P.E
According to this question, potential energy (P.E) of the roller coaster is 50J and the kinetic energy (K.E) is also 50J. Hence, the mechanical energy (M.E) is
M.E = 50J + 50J
M.E = 100J
If the P.E and K.E of a roller coaster is 50 Joules respectively, the mechanical energy of the roller coaster is 100 Joules.
Given the following data:
Potential energy of roller coaster = 50 Joules.Kinetic energy of roller coaster = 50 Joules.To find the mechanical energy of the roller coaster:
The mechanical energy of a physical object or body is the total sum of the potential energy (P.E) and kinetic energy (K.E) possessed by an object.
Mathematically, mechanical energy is given by the formula;
Substituting the given parameters into the formula, we have;
[tex]M.E = 50 + 50[/tex]
Mechanical energy (M.E) = 100 Joules.
Therefore, the mechanical energy of the roller coaster is 100 Joules.
Read more: https://brainly.com/question/23153766
A group of students are studying the movement of thermal energy. The teacher asks the students to place the palms of their hands flat on their tabletops and describe what is happening. Which statement below best describes why the table feels cold?
Answer:
The table feels cold because it is at a lower temperature than the students' hands, and thermal energy is being pulled into the table.
Explanation:
The thermal conductivity of the table is low and so it feels cold.
What is Thermal Conductivity?Thermal conductivity is the measure of the ability of a material to conduct heat.
The rate at which heat is transported by conduction through a material's unit cross-section area when a temperature gradient exits perpendicular to the area is known as thermal conductivity.
Thermal energy is the energy contained within a system that accounts for the temperature of the system.
The human body cannot measure the temperature of any object but it can feel the difference in the temperature.
If one body is at 20 degrees Celsius, and an object is at 30 degrees Celsius, then the body will feel hot when the object is touched.
Similarly, when the students touched the table, the conductivity of the wood is very low, and it feels cold.
The thermal energy of the table is lower than the thermal energy of the body.
To know more about Thermal Conductivity
https://brainly.com/question/7643131
#SPJ6
how many atoms are in 20.34 grams of aluminum (Al)
A) 6.02 x 10^23 atoms
B) 4.54 x 10^23 atoms
C) 4.54 atoms
D) 548.8 grams
Notice that the value 12.01 grams of natural carbon is the same as the atomic mass value (12.01 amu). It also tells us that 20.34 grams of aluminum contains exactly 6.022 x 1023 atoms of aluminum.
✅
So, the answer is A) 6.02 x 10^23 atoms
IamSugarBee
Answer:
Option A: 6.03 * 10^23 atoms
The equilibrium constant for the chemical equation N2(g)+3H2(g)↽−−⇀2NH3(g) is Kp=0.0133 at 181 ∘C. Calculate the value of Kc for the reaction at 181 ∘C.
Answer:
Kc is 18.478
Explanation:
Here we want to calculate Kc given Kp
The equation that links both is given as follows;
Kc = Kp/(RT)^Δn
where Kp = 0.0133
R is molar gas constant = 0.0821 L.atm/mol.k
T is temperature in kelvin = 181 + 273 = 454K
Δn is the change in number of moles between products and reactants = 2-4 = -2
Substituting these values, we have;
Kc = 0.0133/(0.0821 * 454)^-2
Kc = 18.478
4.47 x 10- 4 spook/ L is the value of Kc for the response N2( g) 3H2( g) 2NH3( g) at 181 °C.
Given
the chemical equation N2(g)+3H2(g)↽−−⇀2NH3(g) is Kp=0.0133 at 181 ∘C.
To Find
the value of Kc for the reaction at 181 ∘C.
Solution
In order to determine the value of Kc for the response N2( g) 3H2( g) 2NH3( g) at 181 °C, we can use the relationship between Kp and Kc.
This equation relates Kp with Kc
Kc = Kp( RT) n
where
Partial pressures are used to express Kp, the equilibrium constant.
In molar attention, Kc represents the equilibrium constant.
The gas constant, or R, is0.08206 L atm/ K spook.
The temperature in Kelvin is T.
The stoichiometric measure n is the difference between the aggregate of the gassy products' and gassy reactants' stoichiometric portions.
Then are the data
Δn = ( 2-( 1 3)) = -2
still, we get
If we substitute the values handed.
The formula for 0.0133 is Kc(0.08206 L/ atm/ Kmol *( 181 273) K)- 2.
When we simplify and find Kc, we gain
Kc equals4.47 x 10- 4 spook/L.
thus,4.47 x 10- 4 spook/ L is the value of Kc for the response N2( g) 3H2( g) 2NH3( g) at 181 °C.
For more similar answer refer
https://brainly.com/question/18484878
The table below gives the numbers of protons, electrons, and neutrons in four atoms.
Number of neutrons
Number of protons
19
Number of electrons
9
Atom
1
12
3
collo
18
10
9
9
9
10
4
19
Based on the table, which atom has a charge of -12
O 1
O 2
03
4
Answer:
THE ANSWER IS D UR WELCOME.
Explanation:
What might a peasized gland within the skull be?
salivary gland
pituitary gland
mammary gland
sebaceous gland
Answer:
Explanation:
pituitary gland
Answer:
B
Explanation:
The pituitary gland is a pea-sized structure that is attached to the undersurface of the brain by a thin stalk.
Which type of reaction has the general formula of AB + CD → AD + CB?
synthesis
decomposition
oxidation
replacement
Answer:
The answer is D. Replacement
The given reaction has been the symbolization for replacement reaction. Thus, option D is correct.
The given general reaction has been:
[tex]\rm AB\;+\;CD\;\rightarrow\;AD\;+\;CB[/tex]
In the given reaction, there has presence of compound AB and CD. The reaction between the two results in the formulation of AD and CB. In the reaction, the B has been more attracted by C and forms bond with C by replacing D.
In the same way, A has been more attracted with D and forms bond with D replacing C.
The type of reaction in which the more reactive element replaces the less reactive element has been termed as replacement reaction. Thus, the given reaction has been the symbolization for replacement reaction. Thus, option D is correct.
For more information about replacement reaction, refer to the link:
https://brainly.com/question/8625202
Suppose that Biuret reagent turns purple when it is added to an unknown substance. What can you conclude about the substance?
Answer:
the unknown substance is a protein
Explanation:
The biuret test is one of the tests for proteins. It can be used to detect peptide linkages. The biuret test is carried out in an alkaline solution. A coordination complex is formed leading to the appearance of a violet color.
Summarily, the biuret method is a colorimetric technique used to test for proteins and peptides. It involves the formation of a purple (violet) complex of Copper salts in alkaline solution.
Hence when the biuret reagent is added to an unknown substance and it turns purple, the unknown substance is a protein
Cis-3-tert-Butylcyclohexanol has the tert-butyl group in the equatorial position and the alcohol in the ________ position.
Answer:
Axial
Explanation:
In the most stable conformation of Cis-3-tert-Butylcyclohexanol, the tert-butyl group is at equatorial position and the alcohol group is in the axial position.
If the tert-butyl group is placed in equatorial position, repulsions are minimized. The bulkier the group, the greater the energy difference between the axial and equatorial conformers. Hence for a ring having a bulky substituent, such bulky substituent is better placed in the equatorial position.
The energy difference between the conformers of Cis-3-tert-Butylcyclohexanol is so high that the compound is almost "frozen" in a conformation where the tert-butyl groups are equatorial and the -OH groups are axial. This conformer is more stable by 24 KJ/mol.
Cis-3-tert-Butylcyclohexanol has the molecular formula of [tex](\rm C_{10}H_{20}O)[/tex]. The alcohol group in the compound is found at the axial position.
What are the groups and their positions?In the compound Cis-3-tert-Butylcyclohexanol alcohol is the functional group present at the axial position and tert-butyl group at the equatorial position of the compound.
Tert-butyl group at the equatorial position minimizes the repulsive forces and are bulky groups, the position of the bulkier groups at the equatorial positions are better as the energy differences will be large.
The difference in the energy of the conformers of the compound is high and the conformation of the compound remains as it is.
Therefore, tert-butyl groups are at equatorial and the alcohol groups are at axial.
Learn more about equatorial and axial positions here:
https://brainly.com/question/10696788
what is the hydronium ion concentration in a solution formed by combining 750mL of 0.10M NaOH with 250mL of 0.30 M HCl
Answer:
[tex][H^+]=1x10^{-7}M[/tex]
Explanation:
Hello.
In this case, since the reaction between sodium hydroxide and hydrochloric acid has a 1:1 mole ratio between them:
[tex]NaOH+HCl\rightarrow NaCl+H_2O[/tex]
In order to compute the hydronium H⁺ concentration in the mixed volumes of the given solutions we first compute the moles of each reactant:
[tex]n_{NaOH}=0.750L*0.10mol/L=0.075mol\\\\n_{HCl}=0.250L*0.30mol/L=0.075mol[/tex]
As seen, since those amounts are the same, we infer all the acid and base are consumed so the pH is 7 because a neutral salt is produced, and the corresponding H⁺ concentration is:
[tex][H^+]=10^{-pH}=10^{-7}=1x10^{-7}M[/tex]
Best regards!
Please help, I really don’t understand this!!!
Analysing the Question:
We are given the balanced equation:
C₆H₁₂O₆ + 6O₂→ 6CO₂ + 6H₂O
from this equation, we can say that: for every 1 mole of Glucose, we need 6 moles of Oxygen
Moles of Glucose used in the reaction:
Molar mass of Glucose = 180 grams / mol
Given mass of Glucose = 1 gram
Mole of Glucose = Given mass / Molar mass
Moles of Glucose = 1 / 180 moles
Mass of Oxygen required:
We know that for every mole of Glucose, we need 6 moles of Oxygen
So, for 1/180 moles of Glucose, we need 6 / 180 = 1 / 30 moles of Oxygen
Mass of 1 / 30 moles of Oxygen:
Mass = Molar mass * number of moles
Mass of Oxygen = 32 * 1/30
Mass of Oxygen = 32 / 30
Mass of Oxygen = 1.06 grams
Which statement best describes the octet rule?
A. When an atom becomes an ion, it gains or loses electrons so that its valence shell holds eight electrons.
B. When an atom becomes an ion, it gains or loses protons so that its nucleus holds eight protons.
C. When an atom becomes an ion, it gains or loses eight electrons.
D. When an atom becomes an ion, it gains or loses eight neutrons.
What is the momentum of a 1kg ball moving at 5m/s?
Answer:
5Ns
momentum= mass *velocity
=1*5
=5Ns
Neon effuses 1.26 times as fast an an unknown gas at a particular temperature. What is the molar mass of the unknown gas
Answer:
31.75 amu
Explanation:
Using Graham's equation of effusion as depicted below:
V1/V2 = √m2/√m1
Where; v1 = speed of neon gas
V2 = speed of unknown gas
m1 = molar mass of neon gas
m2 = molar mass of unknown gas
According to this question: v1 = 1.26x, m1 = 20amu, v2 = 1x, m2 = ?
Hence,
1.26x/1x = √m2/√20
1.26/1 = √m2/4.472
√m2 = 4.472 × 1.26
√m2 = 5.635
m2 = 5.635²
m2 = 31.75 amu
Therefore, the molar mass of the unknown gas is 31.75 amu.
Which two chemical formulas represent molecules?
Answer:
There are three basic types of chemical formula, the empirical formula, the molecular formula, and the structural formula.
How many atoms of Carbon are found on the PRODUCTS side?
Which of the following is an example of a chemical change that occurs in your home?
A) Water boiling on the stove
B) Composting your own fertilizer
C) Smashing a window with a baseball
D) Adding food coloring to icing for a cake
the two stages of cellular respiration.
Which belongs in the area marked X?
Energy is released.
Oxygen is used up.
Glucose is broken down.
Carbon dioxide is used up.
Answer:
Oxygen is used up
Explanation:
Have an amazing day! And here is the attachment If you don't believe me. Brainliest would be nice.
what is the point of doing an experiment. Help thank you
Answer:
to find out how somethings work
Explanation:
Answer:
Doing experiments is good because when you try these possibilities you can learn about something that you've tried or see why this experiment didn't really work. It also helps you understand that not everything you try will work. that's why we experiment.
Explanation:
Hope this helps:)
