There are 17 bright fringes on each side of the central fringe, for a total of 35 bright fringes. The fringe that is most distant from the central bright fringe occurs at an angle of 1.01° relative to the original direction of the beam.
Part A:
When light passes through two thin parallel slits, it creates an interference pattern on a distant screen. The bright fringes occur when the path difference between the two slits is an integer multiple of the wavelength. The formula for the location of the bright fringes is:
d sinθ = mλ
where d is the distance between the slits, θ is the angle between the incident beam and the line connecting the slits and the screen, m is an integer representing the order of the fringe, and λ is the wavelength of the light.
For this problem, d = 1.02×10^−2 mm and λ = 580 nm = 5.80×10^-7 m. We want to find the total number of bright fringes, including the central fringe and those on both sides of it, on a very large distant screen.
The maximum value of sinθ is 1, which occurs when θ = 90°. Plugging in the values, we get:
1.02×10^−2 mm × sin90° = m × 5.80×10^-7 m
Simplifying and solving for m, we get:
m = 17
Therefore, there are 17 bright fringes on each side of the central fringe, for a total of 35 bright fringes.
Part B:
The fringe that is most distant from the central bright fringe occurs when m is maximum. From Part A, we know that the maximum value of m is 17. Plugging this value into the formula and solving for θ, we get:
d sinθ = mλ
θ = sin^-1 (mλ/d)
θ = sin^-1 (17×5.80×10^-7 m / 1.02×10^-2 mm)
θ = 1.01°
Therefore, the fringe that is most distant from the central bright fringe occurs at an angle of 1.01° relative to the original direction of the beam.
Learn more about fringes here:-
https://brainly.com/question/31315270
#SPJ11
galileo used an inclined plane to slow down the falling motion so that he could measure the acceleration due to gravity. what was his rationale for using the inclined plane?multiple choice question.along an inclined plane, the falling object moves with a constant speed.along an inclined plane, only part of gravity acts on the object in its direction of motion.along an inclined plane, gravity has no effect on the falling object.
The rationale for Galileo using an inclined plane was that along an inclined plane, only part of gravity acts on the object in its direction of motion. Option 1 is correct.
Galileo's use of an inclined plane was an important contribution to the study of physics, as it allowed for the accurate measurement of the acceleration due to gravity. Prior to this, there was little understanding of the laws governing the motion of objects, and many misconceptions existed.
By carefully measuring the motion of falling objects along an inclined plane, Galileo was able to demonstrate that the acceleration due to gravity was constant, regardless of the weight or shape of the object. This was a major breakthrough in the understanding of physics and laid the foundation for further study in this field. Option 1 is correct.
To know more about the Galileo, here
https://brainly.com/question/9724017
#SPJ4
A harmonic wave travels in a wire with
amplitude 3. 66 mm, wavelength 2. 17 m, and
frequency 615 Hz.
What is the speed with which the wave
travels?
Answer in units of m/s.
The speed with which the wave travels in the wire is 1333.55 m/s.
The speed with which a harmonic wave travels in a wire can be determined using the equation:
v = λf
where v is the speed of the wave, λ is the wavelength, and f is the frequency.
Substituting the given values, we get:
v = 2.17m * 615Hz
v = 1333.55 m/s
It's worth noting that the amplitude of the wave, which is given as 3.66mm, does not affect the speed of the wave.
The amplitude of a wave is the maximum displacement of a point on the wave from its rest position,
whereas the speed of the wave is determined by the properties of the medium through which it travels, such as its density and elasticity.
Harmonic waves are common in many physical systems, such as sound waves in air and electromagnetic waves in space.
Understanding the properties and behavior of waves is important in many areas of science and technology, from acoustics and optics to communications and signal processing.
To know more about harmonic wave refer here
https://brainly.com/question/8885243#
#SPJ11
A body is given an initial velocity of 40m/s at a point P . The body decelerates uniformly and attains a velocity of 20m/s at a point X.The body is finally brought to rest at a point M. If the time taken by the body through the whole journey is 20s and the distance covered from P to X it's 200m, calculate i)the deceleration of the body ii)distance between X and M iii)time taken by the body to move from X to M
The deceleration of the body is -1 m/s^2, the distance between X and M is 200m, and the time taken by the body to move from X to M is 20 seconds.
Kinematic equations are a set of mathematical equations used to describe the motion of an object in terms of its displacement, velocity, and acceleration, given certain initial conditions.
To solve this problem, we can use the following kinematic equations of motion:
v = u + at
s = ut + (1/2)at^2
v^2 = u^2 + 2as
Where:
u = initial velocity
v = final velocity
a = acceleration or deceleration
t = time taken
s = distance covered
i) To find the deceleration of the body:
From the first equation, we have:
v = u + at
20 = 40 + a(20)
a = (20-40)/20 = -1 m/s^2
Therefore, the deceleration of the body is -1 m/s^2.
ii) To find the distance between X and M:
We know that the total distance covered from P to M is:
s = 200m + distance between X and M
When the body is at rest at point M, we can use the third equation:
v^2 = u^2 + 2as
Since the body is brought to rest, the final velocity is zero:
0 = 20^2 + 2(-1)s
s = 200 m
Therefore, the distance between X and M is 200m.
iii) To find the time taken by the body to move from X to M:
From the second equation, we have:
s = ut + (1/2)at^2
Since the initial velocity is 20m/s and the final velocity is zero, we have:
s = (1/2)at^2
200 = (1/2)(-1)t^2
t^2 = 400
t = 20 seconds
So, the time taken by the body to move from X to M is 20 seconds.
Therefore, 200 meters separate X and M, the body is decelerating at -1 m/s^2, and it takes the body 20 seconds to get from X to M.
To learn more about Newton's law of motion click:
brainly.com/question/29775827
#SPJ1
What is the tension in the string when the meterstick is vertical?.
Assuming that the meterstick is in equilibrium, the sum of the forces acting on it must be zero. At the top of the meterstick, the tension in the string is pulling upward with a force of T, while the weight of the meterstick is pulling downward with a force of mg, where m is the mass of the meterstick and g is the acceleration due to gravity.
Since the meterstick is vertical, the weight is acting straight down and the tension is acting at an angle of 90 degrees. Therefore, we can use the following equation to find the tension:
T = mg/cosθ
where θ is the angle between the string and the meterstick (which is 90 degrees in this case). Plugging in the values given:
T = (0.5 kg)(9.8 m/s^2)/cos(90°) = 0 N
Therefore, the tension in the string when the meterstick is vertical is 0 N.
To know more about meterstick refer here
https://brainly.com/question/29690562#
#SPJ11
Kindly explain newton's formula for the speed of sound
Newton's formula for the speed of sound (c) is c = √(K/ρ)
Newton's formula for the speed of sound is an early theoretical prediction of the speed of sound in a medium. The formula includes the following terms:
1. Bulk modulus (K): A measure of a material's resistance to compression.
2. Density (ρ): The mass of a substance per unit volume.
Newton's formula for the speed of sound (c) is given by:
c = √(K/ρ)
This equation suggests that the speed of sound in a medium is dependent on the medium's bulk modulus and density.
The higher the bulk modulus and lower the density, the faster the speed of sound in that medium. However, this formula didn't account for adiabatic processes and was later refined by Laplace.
To learn more about density, refer below:
https://brainly.com/question/29775886
#SPJ11
when traveling at 55mph, how many feet do you need to stop?
When traveling at 55mph, it takes approximately 211 feet to stop.
To determine how many feet you need to stop when traveling at 55 mph, you'll need to consider the following terms:
1. Speed: In this case, it's 55 mph.
2. Conversion factor: To convert mph to feet per second (fps), you need to multiply by 1.467.
3. Braking distance: The distance required to come to a complete stop from a certain speed, which is affected by factors such as the road conditions and vehicle's braking system.
Now, let's calculate the stopping distance:
Step 1: Convert the speed to feet per second.
55 mph × 1.467 = 80.685 fps
Step 2: Calculate the braking distance using the general rule of thumb (which assumes good road conditions and properly functioning brakes) that it takes 1.5 feet to stop for every 1 fps of speed.
80.685 fps × 1.5 = 121.028 feet
So, when traveling at 55 mph, you would need approximately 121 feet to stop. Please note that this is a rough estimate and can vary depending on factors such as road conditions and the efficiency of the vehicle's braking system.
Learn more about Braking distance: https://brainly.com/question/13666022
#SPJ11
As the color of light changes from red to yellow, the
frequency of the light
Answer:
As the color of light changes from red to yellow, the frequency of the light increases.
Explanation:
Red light has the longest wavelength and the lowest frequency among visible light, while yellow light has a shorter wavelength and a higher frequency.
The relationship between the frequency and the wavelength of light is given by the equation:
c = λν
where c is the speed of light, λ is the wavelength of light, and ν is the frequency of light.
Since the speed of light is constant in a vacuum, if the wavelength of light decreases as the color changes from red to yellow, then the frequency must increase. This means that yellow light has a higher frequency than red light.
Which, if any, of these scenarios produce a real image? which, if any, of these scenarios produce a virtual image?.
A real image is formed when the light rays converge and actually intersect at a point, allowing the image to be projected onto a screen. A real image can be captured or observed by placing a screen or a photographic plate at the location of the image.
A virtual image, on the other hand, is formed when the light rays only appear to diverge from a point behind the optical system. It cannot be projected onto a screen but can be observed by looking through the optical system.
Now, without specific scenarios mentioned, it is not possible to provide a definitive answer. The characteristics of the image depend on the specific optical system, such as the type of lens or mirror being used, the object's position, and the distance between the object and the optical system.
In some scenarios, a lens or mirror might produce a real image if the object is placed at a specific distance from the lens or mirror. In other cases, the same lens or mirror might produce a virtual image if the object is placed at a different distance.
To determine whether a scenario produces a real or virtual image, it is necessary to specify the details of the optical system and the object's position relative to it.
To know more about virtual image refer here
https://brainly.com/question/13197137#
#SPJ11
The sensing method that reflects pulsed radar waves off features below the surface is called.
In addition to the acromion process, there is another part of the scapula that articulates with the clavicle. It is called the lateral end of the clavicle. The lateral end of the clavicle forms a joint called the sternoclavicular joint with the medial end of the clavicle. This joint connects the clavicle to the sternum and allows for movement and stability of the shoulder girdle.
The sensing method that reflects pulsed radar waves off features below the surface is called Ground-Penetrating Radar (GPR). GPR is a geophysical technique that uses radar pulses to detect and map subsurface structures, objects, and materials. It works by emitting short pulses of electromagnetic energy into the ground or other materials and measuring the reflected signals. The reflections from subsurface features can provide information about changes in material properties, such as variations in composition, density, and moisture content. GPR is commonly used in various fields, including archaeology, geology, civil engineering, and utility detection.
To know more about acromion refer here
https://brainly.com/question/14131256#
#SPJ11
A student measures the maximum speed of a block undergoing simple harmonic oscillations of amplitude a on the end of an ideal spring. if the block is replaced by one with twice its mass but the amplitude of its oscillations remains the same, then the maximum speed of the block will
When the block is replaced by one with twice its mass but the amplitude of its oscillations remains the same, the maximum speed of the block will decrease.
The maximum speed of a block undergoing simple harmonic oscillations depends on the amplitude and mass of the block. According to the equation for simple harmonic motion, the maximum speed (v_max) of an object is given by:
v_max = ω * A
where ω represents the angular frequency and A represents the amplitude of oscillation.
In the case described, the student measures the maximum speed of a block with a certain amplitude, A. Now, if the block is replaced by one with twice its mass (2m) while keeping the amplitude of oscillation (A) the same, we need to consider the effect of mass on the angular frequency.
The angular frequency (ω) of an object undergoing simple harmonic motion is given by:
ω = √(k / m)
where k represents the spring constant and m represents the mass of the block.
Since the spring constant (k) remains constant and the mass (m) doubles, the angular frequency (ω) will decrease.
Now, let's analyze the effect on the maximum speed. As the angular frequency decreases and the amplitude (A) remains the same, the maximum speed (v_max) will also decrease.
To know more about harmonic oscillations refer here
https://brainly.com/question/13152216#
#SPJ11
Andrew was running late for class and could only find a parking space next to the golf course. His new truck was hit by a 0. 300 kg golf ball which left a 0. 400 cm dent in the hood. The golf ball was falling with a velocity of 8. 00 m/s.
a) What is the initial momentum of the golf ball? b) what average force did the hood of the truck exert on the ball to stop it? c) how long did it take for the hood to stop the ball?
The situation described here involves the concepts of running, parking, and velocity. Andrew was running late for his class and had to park his truck next to the golf course. Unfortunately, while he was away, a golf ball hit his truck, leaving a noticeable dent in the hood. The golf ball was falling with a velocity of 8.00 m/s.
Velocity is a measure of the rate of change of position of an object with respect to time. In this case, the golf ball was falling with a velocity of 8.00 m/s. When the golf ball hit Andrew's truck, it transferred some of its momentum to the truck, resulting in the dent in the hood.
Momentum is a property of a moving object and is equal to its mass times its velocity. Since the golf ball had a mass of 0.300 kg and was falling with a velocity of 8.00 m/s, it had a certain amount of momentum. When it hit the truck, it transferred some of its momentum to the truck, resulting in the dent in the hood.
The situation described here highlights the importance of being careful while parking one's vehicle. Andrew had to park his truck in a spot he might not have preferred due to his running late. Had he parked in a safer spot, his truck would not have been hit by the golf ball. This also emphasizes the importance of being aware of one's surroundings and being mindful of potential hazards while parking.
To know more about situation refer here
https://brainly.com/question/14501632#
#SPJ11
What is the sign of the charge in this figure? a)positive b)You cannot tell from the information given. c) negative d) neutral
Answer:
Explanation:
C
In charging by induction, a charged object is brought near an object without touching it. The presence of the charge object induces electron movement and a polarization of the object. Then conducting pathway to ground is established and electron movement occurs between the object and the ground. During the process, the charged object is never touched to the object being charged.
(c)Light is incident in a glass material which is to be used to construct a fibre optic cable. If the critical angle is 25°,what is the refractive index?
The refractive index of the glass material is approximately 1.4226.
To calculate the refractive index of the glass material for the fiber optic cable, you can use Snell's Law and the definition of the critical angle. The critical angle (θc) is the angle of incidence at which the angle of refraction is 90°. In this case, the critical angle is 25°.
Snell's Law: n1 * sin(θ1) = n2 * sin(θ2)
For the critical angle, θ1 = 25°, and θ2 = 90°. The refractive index of air (n1) is approximately 1.
Applying Snell's Law: 1 * sin(25°) = n2 * sin(90°)
Solving for the refractive index (n2) of the glass material:
n2 = sin(25°) / sin(90°)
n2 ≈ 0.4226 / 1
n2 ≈ 1.4226
The refractive index of the glass material is approximately 1.4226.
To learn more about index, refer below:
https://brainly.com/question/14297987
#SPJ11
A 0.500-kg glider, attached to the end of an ideal spring with force constant k = 450
n/m, undergoes shm with an amplitude of 0.040 m. compute (a) the maximum speed
of the glider; (b) the speed of the glider when it is at x = -0.015 m; (c) the magnitude of
the maximum acceleration of the glider; (d) the acceleration of the glider at x = -0.015
m; (e) the total mechanical energy of the glider at any point in its motion
The motion of a 0.500-kg glider attached to an ideal spring with a force constant of k=450m can be analyzed in terms of mechanical energy. Mechanical energy is the sum of kinetic energy and potential energy, and is conserved in a closed system with no external forces acting on it.
As the glider moves back and forth on the spring, its kinetic energy varies with its speed and its potential energy varies with its position. At any point in its motion, the total mechanical energy of the glider is equal to the sum of its kinetic and potential energy.
At the maximum compression of the spring, the glider has zero velocity and maximum potential energy. As it moves away from this point, the spring begins to expand and the glider begins to move faster, converting potential energy into kinetic energy. At the point where the spring is fully extended, the glider has maximum velocity and zero potential energy.
As the glider continues to move back towards the spring's rest position, it begins to slow down and convert kinetic energy back into potential energy. At the point of maximum compression again, the glider has zero velocity and maximum potential energy once more.
Throughout its motion, the total mechanical energy of the glider remains constant, as there are no external forces acting on the system. This means that the sum of the kinetic and potential energy at any point in its motion is equal to the total mechanical energy of the system.
In summary, the mechanical energy of a glider attached to an ideal spring can be analyzed at any point in its motion by considering the conversion of potential energy into kinetic energy and vice versa. The total mechanical energy of the system is constant throughout its motion, making it a useful tool for analyzing the behavior of the glider on the spring.
To know more about Mechanical energy refer here
https://brainly.com/question/29509191#
#SPJ11
A 250 Kg cast iron car engine contains water as a coolant. Suppose the temperature of the engine is 35°C when it is shut off. The air temperature is 10°C. The heat given off
by the engine and water in it, as they cool to air temperature is 4. 4x106 J. What mass of water is used to cool the engine?
Approximately 14.58 Kg of water is used to cool the 250 Kg cast iron car engine.
To find the mass of water used to cool a 250 Kg cast iron car engine, we must consider the heat given off by the engine and water as they cool to air temperature.
Given that the engine's initial temperature is 35°C, and the air temperature is 10°C, the heat given off is 4.4 x 10^6 J.
First, we will calculate the heat given off by the engine alone:
Q_engine = m_engine * c_engine * ΔT_engine
where:
Q_engine = heat given off by the engine
m_engine = mass of the engine (250 Kg)
c_engine = specific heat capacity of cast iron (approximately 460 J/Kg°C)
ΔT_engine = change in temperature of the engine (35°C - 10°C = 25°C)
Q_engine = 250 Kg * 460 J/Kg°C * 25°C
Q_engine = 2,875,000 J
Next, we will find the heat given off by the water (Q_water) by subtracting the heat given off by the engine from the total heat given off:
Q_water = Q_total - Q_engine
Q_water = 4.4 x 10^6 J - 2,875,000 J
Q_water = 1,525,000 J
Now, we will find the mass of water (m_water) using the equation:
Q_water = m_water * c_water * ΔT_water
where:
c_water = specific heat capacity of water (4,186 J/Kg°C)
ΔT_water = change in temperature of the water (25°C)
1,525,000 J = m_water * 4,186 J/Kg°C * 25°C
m_water = 1,525,000 J / (4,186 J/Kg°C * 25°C)
m_water ≈ 14.58 Kg
To know more about mass of water refer here
https://brainly.com/question/26789700#
#SPJ11
13. If PE + KE; = PE, + KE;, why do problems involving mechanical energy fail to meet his rule with an exact answer?
The reason why problems involving mechanical energy fail to meet this rule with an exact answer is because mechanical energy is not a conserved quantity in real-world situations.
The law of conservation of mechanical energy states that the total mechanical energy of a closed system, which includes both potential energy(PE) and kinetic energy(KE), remains constant as long as no external forces act on the system.
In an ideal situation, where there is no friction or other external forces acting on the system, the total mechanical energy would remain constant. However, in most real-world situations, there are always external forces present, such as air resistance or friction, that cause some of the mechanical energy to be lost or converted into other forms of energy such as heat or sound. Therefore, it is impossible to have an exact answer when dealing with mechanical energy problems in real-world situations.
To know more about mechanical energy, click here;
https://brainly.com/question/29408366
#SPJ11
suppose you stand on a swing instead of sitting on it will your frequency of oscillation increase or decrease
If you stand on a swing instead of sitting on it, the frequency of oscillation will decrease.
Frequency of oscillationsThe frequency of oscillation of a swing depends on its length and acceleration due to gravity. The longer the swing, the slower it oscillates, and the shorter the swing, the faster it oscillates. The acceleration due to gravity provides the restoring force that pulls the swing back toward its equilibrium position.
When you stand on a swing instead of sitting on it, you effectively shorten the length of the swing. This is because your center of mass is higher up on the swing, which reduces the length of the pendulum from the pivot point to your center of mass. A shorter pendulum has a higher frequency of oscillation than a longer pendulum, so the frequency of oscillation of the swing will increase.
However, when you stand on a swing, you also make it harder for the swing to move. This is because your legs are now acting as shock absorbers, and they absorb some of the energy that would otherwise be used to swing the swing. This makes it harder for the swing to oscillate, which reduces the frequency of oscillation.
The net effect of these two factors is that the frequency of oscillation of the swing decreases when you stand on it instead of sitting on it.
More on oscillation's frequency can be found here: https://brainly.com/question/14316711
#SPJ1
Which has the longest wavelength and, therefore, the lowest frequency/energy?.
The electromagnetic wave with the longest wavelength and lowest frequency/energy is radio waves.
The electromagnetic spectrum encompasses a range of waves with varying wavelengths and frequencies. At one end of the spectrum are radio waves, which have the longest wavelengths and lowest frequencies. As we move along the spectrum towards shorter wavelengths and higher frequencies, we encounter other types of waves such as microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays.
Radio waves are commonly used for communication, including radio broadcasting, television signals, wireless networks, and radar. They have wavelengths ranging from several millimeters to hundreds of kilometers. Due to their long wavelengths, radio waves carry less energy compared to waves with shorter wavelengths, such as visible light or X-rays.
It's important to note that even though radio waves have low energy and long wavelengths, they are still part of the electromagnetic spectrum and can be used for various practical applications in communication and technology.
To know more about electromagnetic wave refer here
https://brainly.com/question/3101711#
#SPJ11
A 1. 5\,\text {kg}1. 5kg1, point, 5, start text, k, g, end text mass attached to an ideal spring oscillates horizontally with an amplitude of 0. 50\,\text m0. 50m0, point, 50, start text, m, end text. the spring constant is 85\,\dfrac{\text n}{\text m}85 m n 85, start fraction, start text, n, end text, divided by, start text, m, end text, end fraction
This scenario represents a simple harmonic motion with a specific period, frequency, maximum velocity and acceleration.
The given scenario describes a mass oscillating horizontally attached to an ideal spring with a spring constant of 85 N/m and an amplitude of 0.50 m. The ideal spring is assumed to have no mass, damping or friction, and therefore it is a simple harmonic oscillator.
The period of oscillation is calculated as T = 2π√(m/k)
where m is the mass and k is the spring constant.
Substituting the given values, we get T = 2π√(1.5/85) = 0.449 s.
The frequency of oscillation is f = 1/T = 2.23 Hz.
The maximum velocity of the mass can be found using the equation vmax = Aω,
where A is the amplitude and ω is the angular frequency.
Substituting the given values, we get vmax = 0.50 × √(k/m) = 0.50 × √(85/1.5) = 5.06 m/s.
The maximum acceleration of the mass can be found using the equation amax = Aω^2 = 0.50 × (2πf)^2 = 7.96 m/s^2.
For more about frequency:
https://brainly.com/question/29739263
#SPJ11
A satellite of mass 20 kg is in orbit around the Earth. At the height of the satellite’s orbit, the gravitational field strength is one quarter of its strength on the surface of the Earth. The gravitational field strength on the surface of the Earth is 10 N/ kg. What is the weight of the satellite as it orbits the Earth?
The weight of a satellite of mass 20 kg in orbit around the Earth, where the gravitational field strength is one-quarter of its value on the surface of the Earth, is 50 N.
The weight of the satellite is given by the formula W = mg, where m is the mass of the satellite and g is the gravitational field strength at its position.
Since the gravitational field strength at the height of the satellite’s orbit is one quarter of its value on the surface of the Earth, we have
g = (1/4) x 10 N/kg = 2.5 N/kg.
Substituting the given values, we get W = 20 kg x 2.5 N/kg = 50 N.
The weight of the satellite is the gravitational force that acts on it due to the Earth’s gravitational field. This force depends on the mass of the satellite and the gravitational field strength at its position. The gravitational field strength varies with the distance from the Earth’s center, and it decreases as the distance increases.
The weight of the satellite is less than its mass because it is in freefall around the Earth, and it experiences a centripetal force due to the gravitational attraction of the Earth. This centripetal force exactly balances the gravitational force, so the satellite remains in orbit.
In summary, the weight of a satellite of mass 20 kg in orbit around the Earth, where the gravitational field strength is one-quarter of its value on the surface of the Earth, is 50 N.
The weight of the satellite depends on its mass and the gravitational field strength at its position, and it is less than its mass because of the centripetal force that balances the gravitational force and keeps the satellite in orbit.
To know more about mass refer here:
https://brainly.com/question/18064917#
#SPJ11
A body moves in circle with increasing angular velocity at time t = 6sec the angular velocity is 27 rad/s what is the radius of circle made by the body where linear velocity is 81 cm/s?
With increasing angular velocity at time t = 6sec the angular velocity is 27 rad/s, the radius of circle made by the body where linear velocity is 81 cm/s is: 3 cm
To find the radius of the circle made by the body with a linear velocity of 81 cm/s and an angular velocity of 27 rad/s at time t = 6 seconds, we can use the relationship between linear velocity (v) and angular velocity (ω) in circular motion. This relationship is given by the formula:
v = ω * r
where r is the radius of the circle.
We are given the linear velocity (v = 81 cm/s) and the angular velocity (ω = 27 rad/s). We can now rearrange the formula to solve for the radius (r):
r = v / ω
Substitute the given values:
r = 81 cm/s / 27 rad/s
r = 3 cm
Therefore, the radius of the circle made by the body is 3 cm.
To know more about angular velocity, refer here:
https://brainly.com/question/30408375#
#SPJ11
Tug-of-War During a tug-of-war, team A does 2. 20x105] of work in pulling team B 8. 00 m. What average force did team A exert?
The average force exerted by team A during the tug-of-war is approximately 27500 N.
To find the average force exerted by team A during the tug-of-war, we can use the formula:
Work (W) = Force (F) × Distance (d) × cos(θ)
Given:
Work done by team A (W) = 2.20 × [tex]10^5[/tex] J
Distance (d) = 8.00 m
The angle (θ) between the force and the displacement is not provided. Assuming the force is applied parallel to the displacement, cos(θ) = 1.
Using the formula above, we can rearrange it to solve for force (F):
F = W / (d × cos(θ))
Since cos(θ) = 1, we can simplify the equation to:
F = W / d
Substituting the given values:
F = (2.20 × [tex]10^5[/tex] J) / (8.00 m)
F ≈ 27500 N
To know more about average force refer here
https://brainly.com/question/24704743#
#SPJ11
help on physics equations
[tex]7. C^{14} _{6} ======== e^{0} _{-1} + N^{14} _{7}[/tex]
[tex]8. Th^{234} _{90}======== C^{234} _{91} + e^{0} _{-1}[/tex]
[tex]9. Pa^{234} _{91} ========= U^{234} _{92} + e^{0} _{-1}[/tex]
[tex]10. H^{3} _{1} ======== \beta^{0} _{-1} + He^{3} _{2}[/tex]
[tex]11. Be^{9} _{4} + H^{1} _{1} ========= He^{4} _{2} + Li^{6} _{3}[/tex]
[tex]12 .C^{15} _{6} + n^{1} _{0} ======== C^{16} _{6}[/tex]
[tex]13. Al^{27} _{13} + H^{2} _{1} ======== He^{4} _{2} + mg^{25} _{12}[/tex]
[tex]14. Sc^{45} _{21} + n^{1} _{0} ========= K^{42} _{19} + He^{4} _{2}[/tex]
[tex]15. U^{233} _{92} =========== He^{4} _{2} + Th^{229} _{90}[/tex]
Nuclear reactions are balance.
One or more nuclides are created during nuclear reactions when two atomic nuclei or one atomic nucleus and a subatomic particle collide. The responding nuclei, also known as the parent nuclei, are not the same as the nuclides that result from nuclear reactions. Nuclear reaction is always balance.
To know more about nuclear reaction :
https://brainly.com/question/16526663
#SPJ1.
An object is placed to the left of a converging lens. Which of the following statements are true, and which are false? a) The image is always to the right of the lens. b) The image can be upright or inverted
The statement "The image is always to the right of the lens" is false.
However, the statement "The image can be upright or inverted" is true.
When an object is placed to the left of a converging lens, the image can be formed in different positions depending on the distance of the object from the lens and the focal length of the lens.
If the object is located at a distance greater than twice the focal length of the lens, the image will be real, inverted and located to the right of the lens.
If the object is located between the focal length and twice the focal length of the lens, the image will still be real and inverted but located on the same side of the lens as the object.
If the object is located at a distance less than the focal length of the lens, the image will be virtual, upright and located on the same side of the lens as the object.
To know more about converging lens refer here
https://brainly.com/question/28348284#
#SPJ11
since we varied both initial velocity and mass, does it appear that conservation of momentum and conservation of energy hold across all trials regardless of initial conditions? you can look at individual trials, sets of trials with similar conditions, as well as the means across all elastic trials. are there any patterns? for example, did higher mass or faster velocities do a better job of showing momentum or kinetic energy conservation? if so, why might this be?
The total kinetic energy of the system before the collisions was equal to the total kinetic energy of the system after the collisions.
It appears that both conservation of momentum and conservation of energy hold across all trials regardless of initial conditions. This can be inferred from the fact that the elastic collisions were perfectly elastic, meaning that there was no loss of kinetic energy during the collisions. As a result, the system's total kinetic energy before the collisions was equal to the system's total kinetic energy after the collisions.
As for the conservation of momentum, this can be confirmed by calculating the momentum of the system before and after each collision and comparing the results. In a perfectly elastic collision, the total momentum of the system is conserved, which means that the momentum before the collision is equal to the momentum after the collision.
There do not appear to be any significant patterns based on the information provided regarding whether higher mass or faster velocities did a better job of showing momentum or kinetic energy conservation. However, it is important to note that in a perfectly elastic collision, both momentum and kinetic energy are conserved regardless of the initial conditions of the system.
To know more about the Momentum, here
https://brainly.com/question/29579131
#SPJ4
at steady-state, what is the frequency of (displacement) of the mass-spring-damper and will this frequency be in phase with the sinusoidal driving force? explain how you arrived at your answer
The frequency of displacement of a mass-spring-damper system under sinusoidal driving force is equal to the driving force frequency and in phase with it at steady state.
In a mass-spring-damper system driven by a sinusoidal force, the system will reach a steady-state where the amplitude of the displacement oscillations will remain constant. The frequency of this displacement will be equal to the frequency of the driving force.
Whether the frequency of displacement will be in phase with the driving force depends on the damping ratio of the system. If the damping ratio is zero (i.e. the system is undamped), the displacement frequency will be in phase with the driving force. However, if the system is damped, the displacement frequency will lag behind the driving force frequency.
This is because damping causes energy to be dissipated from the system, resulting in a reduction in the amplitude of the displacement oscillations. As a result, the displacement frequency will be slightly lower than the driving force frequency, and the displacement will lag behind the driving force. The amount of lag will depend on the damping ratio of the system.
To know more about steady state, here
brainly.com/question/30433261
#SPJ4
--The complete question is, In a mass-spring-damper system, a sinusoidal driving force is applied. At steady-state, what is the frequency of displacement of the system and will this frequency be in phase with the driving force? Provide an explanation for your answer--
identify the dependent and independent variable on the following scenario: a researcher is studying the effect of sleep on academic performance. Thanking that less sleep will lead to lower grades. She has some people sleep six hours per night. Some people sleep three hours per night, and some people sleep as much as they want she did monitors academic behavior during English math classes among participants.
In this scenario, the independent variable is the amount of sleep and the dependent variable is the academic performance in English and math classes.
In this research, a researcher is studying the effect of sleep on academic performance. She thinks that less sleep will lead to lower grades. Therefore, she has some people sleep six hours per night. Some people sleep three hours per night, and some people sleep as much as they want.
She then monitors academic behavior during English math classes among participants.
The independent variable here is the amount of sleep that the participants get each night. It is the variable that is being manipulated or changed by the researcher.
The researcher is interested in studying the effect of different amounts of sleep on academic performance. Therefore, the amount of sleep is the independent variable.
The dependent variable is the academic performance of the participants in English and math classes. It is the variable that is being measured by the researcher. The researcher wants to know how different amounts of sleep affect academic performance.
For more such questions on independent variable, click on:
https://brainly.com/question/28433016
#SPJ11
For its size, the common flea is one of the most accomplished jumpers in the animal world. a 2.30-mm-long, 0.490 mg flea can reach a height of 18.0 cm in a single leap.
For its size, the common flea is one of the most accomplished jumpers in the animal world. a 2.30-mm-long, 0.490 mg flea can reach a height of 18.0 cm in a single leap.
a) To calculate the kinetic energy per kilogram of mass of the flea, we can use the formula
KE/kg = KE / m
Where KE is the kinetic energy of the flea and m is its mass in kilograms.
First, we need to convert the mass of the flea from milligrams to kilograms
m = 0.460 mg / 1000 = 0.00046 kg
Next, we can use the equation for gravitational potential energy
PE = m * g * h
Where g is the acceleration due to gravity (9.81 m/s^2) and h is the height the flea jumped (0.15 m).
Therefore, the potential energy of the flea is
PE = 0.00046 kg * 9.81 m/s^2 * 0.15 m = 0.00068 J
The kinetic energy of the flea just before takeoff would be equal to its potential energy, assuming that all of its energy was converted from potential energy to kinetic energy during the jump. Therefore:
KE = 0.00068 J
Finally, we can calculate the kinetic energy per kilogram of mass
KE/kg = KE / m = 0.00068 J / 0.00046 kg = 1.48 J/kg.
b) To find out how high the 79.0 kg, 2.00-m-tall human could jump if they could jump to the same height compared with their length as the flea jumps compared with its length, we can use the equation
Height = body length x 60
Where body length is the length of the body from the feet to the top of the head.
Assuming an average body proportion, we can estimate the body length of the human to be about 1.7 meters.
Therefore, the height the human could jump would be
height = 1.7 m x 60 = 102 m.
However, it is important to note that this calculation is purely theoretical and does not take into account the many physiological and biomechanical limitations that would make such a jump impossible for a human.
The given question is incomplete and the complete question is '' For its size, the common flea is one of the most accomplished jumpers in the animal world. A 2.50-mm-long, 0.460 mg flea can reach a height of 15.0 cm in a single leap. a) Calculate the kinetic energy per kilogram of mass. b) If a 79.0 kg, 2.00-m-tall human could jump to the same height compared with his length as the flea jumps compared with its length, how high could the human jump''.
To know more about common flea here
https://brainly.com/question/15393026
#SPJ4
A particle (q = -4. 0 C, m = 5. 0 mg) moves in a uniform magnetic with a velocity having a magnitude of 2. 0 km/s. And a direction that is 50° away from that of the magnetic field. The particle is observed to have an acceleration with a magnitude of 5. 8 m/s2. What is the magnitude of the magnetic field?
The area of contact between each tire and the ground is[tex]0.000562 m^2.[/tex]
The total weight supported by the ground is the sum of the weight of the rider and the bike:
W_total = 715 N + 98 N = 813 N
Since the weight is supported equally by the two tires, each tire supports half of the total weight:
W_per_tire = W_total / 2 = 406.5 N
The pressure in each tire is given as gauge pressure, which is the pressure above atmospheric pressure. Therefore, the absolute pressure in each tire is:
P_abs = P_gauge + P_atm
where P_atm is the atmospheric pressure, which we assume to be[tex]1.01* 10^5 Pa[/tex] (standard atmospheric pressure at sea level).
So, the absolute pressure in each tire is:
[tex]P_abs = 6.20 * 10^5 Pa + 1.01 *10^5 Pa = 7.21 *10^5 Pa[/tex]
The area of contact between each tire and the ground can be calculated using the equation:
F = P × A
where F is the force on the tire, P is the pressure, and A is the area of contact.
For each tire, we can write:
W_per_tire = P × A
Solving for A, we get:
A = W_per_tire / P
Plugging in the values we know, we get:
[tex]A = 406.5 N / 7.21 *10^5 Pa = 0.000562 m^2[/tex]
To know more about atmospheric pressure refer here
https://brainly.com/question/28310375#
#SPJ11
a 12.0-kg motorcycle wheel is approximately an annular ring with an inner radius of 0.275 m and an outer radius of 0.325 m. the motorcycle is on its center stand, so that the wheel can spin freely. if the drive chain exerts a force of 2,000 n at a radius of 5.00 cm, how long, starting from rest, does it take to reach an angular velocity of 95.0 rad/s?
As a result, the motorbike wheel takes roughly 0.513 seconds to attain an angular velocity of 95.0 rad/s.
The first step in solving this problem is to find the moment of inertia of the motorcycle wheel. We can use the formula for the moment of inertia of an annular ring:
I = (1/2)mr^2, where m is the mass of the wheel and r is the average radius of the ring, which is (0.325 m + 0.275 m)/2 = 0.3 m.
Plugging in the values, we get:
I = (1/2)(12.0 kg)(0.3 m)^2 = 0.54 kg m^2
Next, we can use the formula for torque to find the net torque acting on the wheel:
τ = Fr, where F is the force exerted by the drive chain and r is the radius at which the force is applied.
Plugging in the values, we get:
τ = (2,000 N)(0.05 m) = 100 Nm
Finally, we can use the rotational kinematics equation to find the time it takes for the wheel to reach an angular velocity of 95.0 rad/s, starting from rest:
ω = ω0 + αt, where ω0 is the initial angular velocity (which is zero), α is the angular acceleration, and t is the time.
We can rearrange this equation to solve for t:
t = (ω - ω0)/α
The angular acceleration α is related to the net torque τ and the moment of inertia I by the formula:
α = τ/I
Plugging in the values, we get:
α = 100 Nm / 0.54 kg m^2 = 185.2 rad/s^2
Now we can plug in all the values to find t:
t = (95.0 rad/s - 0)/185.2 rad/s^2 = 0.513 s
Therefore, it takes approximately 0.513 seconds for the motorcycle wheel to reach an angular velocity of 95.0 rad/s.
To learn more about : angular velocity
https://brainly.com/question/29342095
#SPJ11
