True or false this model represents an ion

Answer:

Neon

Explanation:

All noble gases have 8 valence electrons except helium.

Noble gases include Helium, neon, argon, krypton, xenon, redon.

Electronic configuration of neon:

Ne₁₀ = [He] 2s² 2p⁶

All other options are incorrect because,

Electronic configuration of Fluorine:

F₉ = [He] 2s² 2p⁵

Fluorine have seven valence electrons.

Electronic configuration of oxygen:

O₈ = [He] 2s² 2p⁴

Oxygen have six valence electrons.

Electronic configuration of sodium:

Na₁₁ = [Ne] 3s¹

sodium have one valence electron.

Answer:

The frequency is  [tex]f =  2,01 * 10^{15} \  Hz  [/tex]

Explanation:

From the question we are told that

   The energy required to ionize boron is [tex]E_b  =  801 KJ/mol[/tex]

Generally the ionization energy of boron pre atom is mathematically represented as

     [tex]E_a  =  \frac{E_b}{N_A}[/tex]

Here  [tex]N_A[/tex] is the Avogadro's constant with value [tex]N_A  =  6.022*10^{23}[/tex]

So

      [tex]E_a  =  \frac{801}{6.022*10^{23}}[/tex]

=>     [tex]E_a  =  1.330 *10^{-18} \  J/atom [/tex]

Generally the energy required to liberate one electron from an atom is equivalent to the ionization energy per atom and this mathematically represented as

       [tex]E =  hf  =  E_a[/tex]

=>     [tex]  hf  =  E_a[/tex]

Here h is the Planks constant with value [tex]h = 6.626 *10^{-34}[/tex]

So

       [tex]f =  \frac{1.330 *10^{-18}}{ 6.626 *10^{-34}}[/tex]

=>      [tex]f =  2,01 * 10^{15} \  Hz  [/tex]

Answer:

112.92 s.

Explanation:

Let M₁ be the molar mass of N₂O

Let t₁ be the time taken for N₂O to effuse.

Let M₂ be the molar mass of I₂

Let t₂ be the time taken for I₂ to effuse.

Molar mass (M₁) of N₂O = (14×2) + 16 = 28 + 16 = 44 g/mol

Time (t₁) of effusion of N₂O = 47 s

Molar mass (M₂) of I₂ = 127 × 2 = 254 g/mol

Time (t₂ ) of effusion of I₂ =?

The time take for the same amount of I₂ to effuse can be obtained as follow:

t₂/t₁ = √(M₂/M₁)

t₂/47 = √(254 / 44)

Cross multiply

t₂ = 47 × √(254 / 44)

t₂ = 112.92 s

Therefore, it will take 112.92 s for the same amount of I₂ to effuse.

Answer:

0 degree C

Explanation:

0 degree C = 32 degree F

0 degree F = -17.7778 degree C

Answer:

0 degrees C would be warmer

Explanation:

Answer:

D) 2( 6.02 ×10^23)

Explanation:

using n=m

M

where n = moles

m=mass of substance

M=molar mass .

n( sulfur ) =64

32

= 2

using N =nL

where N is number of entities

n = moles

L= 6.02×20^23

N( of atoms of sulfur) =2(6.02×10^23)

32(6.02 x 10²³) number of atoms are in 64 g sulfur (S) is:

C. 32(6.02 x 10²³) atoms

To determine the number of atoms in 64 grams of sulfur (S), you need to use Avogadro's number, which is approximately 6.02 x 10²³ atoms/mol. This number represents the number of atoms or molecules in one mole of a substance.

1. Find the molar mass of sulfur (S):

The molar mass of sulfur (S) is the mass of one mole of sulfur atoms, and you can find it on the periodic table. The molar mass of sulfur is approximately 32.06 g/mol.

2. Calculate the number of moles of sulfur:

To calculate the number of moles, divide the given mass (64 g) by the molar mass of sulfur (32.06 g/mol):

Number of moles = Mass of sulfur / Molar mass of sulfur

Number of moles = 64 g / 32.06 g/mol

Number of moles = 1.997 moles

3. Use Avogadro's number to find the number of atoms:

Now, multiply the number of moles by Avogadro's number:

Number of atoms = Number of moles × Avogadro's number

Number of atoms = 1.997 moles × 6.02 x 10²³ atoms/mol

Number of atoms = 1.202 x 10²⁴ atoms

So, there are approximately 1.202 x 10²⁴ atoms in 64 grams of sulfur (S). The closest option to this value is:

C. 32(6.02 x 10²³) atoms (which is equivalent to 1.924 x 10²⁴ atoms)

To know more about sulfur here

https://brainly.com/question/1478186

#SPJ2

Answer:

[tex]\Delta S=1.8x10^{-3}\frac{kJ}{K}=1.8\frac{J}{K}[/tex]

Explanation:

Hello.

In this case, given the heat of fusion of THF to be 8.5 kJ/mol and freezing at -108.5 °C, for the required mass of 5.9 g, we can compute the entropy as:

[tex]\Delta S=\frac{n*\Delta H}{T}[/tex]

Whereas n accounts for the moles which are computed below:

[tex]n=5.9g*\frac{1mol}{72g} =0.082mol[/tex]

Thus, the entropy turns out:

[tex]\Delta S=\frac{0.0819mol*8.5 kJ/mol}{(-108.5+273.15)K}\\\\\Delta S=1.8x10^{-3}\frac{kJ}{K}=1.8\frac{J}{K}[/tex]

Best regards.

Answer:

T

Explanation:

A Spider is a creepy crawly with no vertebrae and more than 6 jointed legs.

The Spider belongs to the class Arachnida . The Spider can be referred to as a non-vertebrates hence , they don't have a vertebrae(backbone).

The Spider and Cockroach are both non-vertebrates but with different pairs of legs. A cockroach is belongs to the class Insecta in which those under this class have only six jointed legs.

The Spider has eight jointed legs which is more than six and is a characteristic of Arachnids.

A snake on the other hand is a vertebrate which exempts it from being the answer.

Read more on https://brainly.com/question/18770888

Answer:

pH = 9.26

Explanation:

Let's make the reaction of this weak base:

C₅H₅N  +  H₂O  ⇄    C₅H₅NH⁺  +  OH⁻     Kb

We do not know the Kb, but we can discover it from pKb

Kb = 10^⁻pKb  →  10⁻⁸'⁷⁷ = 1.70×10⁻⁹

So, let's make the expression for Kb

Kb = [OH⁻] . [C₅H₅NH⁺] / [C₅H₅N]

In the equilibrum, we would have  0.20 moles from the begining - x (react)

So we would proudce x moles of OH⁻ and x moles of C₅H₅NH⁺.

In conclussion:

1.70×10⁻⁹ = x . x / (0.20 - x)

To avoid the quadratic formula we can miss the x from the substraction

1.70×10⁻⁹ = x² / 0.20

1.70×10⁻⁹ . 0.20 = x²

We avoid the x from the (0.20-x), because the base is so concentrated, and Kb is very small.

x = √(1.70×10⁻⁹ . 0.20) → 1.84×10⁻⁵

That's the value of [OH⁻], so we can calculate pOH

- log [OH⁻] = pOH → - log 1.84×10⁻⁵ = 4.73

Then pH = 14 - pOH

14 - 4.73 = 9.26

The pH of a 0.20 M aqueous solution of pyridine is approximately 9.26.

Given,

pKb = 8.77

Concentration = 0.20M

The pKb is related to the pKa by the equation: pKa + pKb = 14.

pKa = 14 - 8.77 = 5.23.

Since pyridine is a base, it can be treated as the conjugate base of its corresponding acid. The acid is the pyridinium cation, which is formed by the protonation of pyridine.

Now, the equilibrium between the pyridine (base) and the pyridinium ion (acid):

C₅H₅N + H₂O ⇌ C₅H₅NH⁺ + OH⁻

The equilibrium constant expression for this reaction can be expressed as:

Kb = [tex]\frac{([C_5H_5NH^+][OH^-])}{[C_5H_5N]}[/tex]

At equilibrium, the concentration of OH⁻ will be equal to the concentration of [C₅H₅NH⁺], as pyridine is a weak base and will not significantly dissociate in water.

Kb = [tex]\frac{[OH^-]^2}{[C_5H_5N]}[/tex]

Kb = [tex]10^{(-8.77)[/tex]

Kb = [tex]\frac{[OH^-]^2}{[C_5H_5N]}[/tex]

[tex]10^{(-8.77)[/tex] = [tex]\frac{[OH^-]^2}{(0.20 M)}[/tex]

[OH⁻]² = [tex]10^{(-8.77)[/tex] ₓ 0.20 M

[OH⁻] = [tex]\sqrt{10^{-8.77} \times 0.20M}[/tex]

[OH⁻] ≈ 1.42 x 10⁻⁵ M.

The pOH (the negative logarithm of the hydroxide ion concentration):

pOH = [tex]-log_{10}([OH^-])[/tex]

pOH = [tex]-log_{10}[/tex](1.42 x 10⁻⁵)

pOH ≈ 4.85

Since pH + pOH = 14, the pH:

pH = 14 - pOH

pH = 14 - 4.85

pH ≈ 9.26

Learn more about pH, here:

https://brainly.com/question/2288405

#SPJ6

Answer:

The answer is true

Explanation:

bc I took this on edgeunity

Answer:

A high-pressure area, high, or anticyclone, is a region where the atmospheric pressure at the surface of the planet is greater than its surrounding environment. Winds within high-pressure areas flow outward from the higher pressure areas near their centers towards the lower pressure areas further from their centers.

Explanation:

Answer:

1. Caffeine, C₈H₁₀N₄O₂

Amount = 1.00/194 = 0.00515 moles

2. Ethanol, C₂H₅OH

Amount = 0.0217 moles

3. Dry Ice, CO₂

amount = 0.0227 moles

Note: The question is incomplete. The compound are as follows:

1. Caffeine, C₈H₁₀N₄O₂;

2. Ethanol, C₂H₅OH;

3. Dry Ice, CO₂

Explanation:

Amount (moles) = mass in grams /molar mass in grams per mole

1. Caffeine, C₈H₁₀N₄O₂

molar mass of caffeine = 194 g/mol

Amount = 1.00 g/194 g/mol = 0.00515 moles

2. Ethanol, C₂H₅OH

molar mass of ethanol = 46 g/mol

Amount = 1.00 g/46 g/mol = 0.0217 moles

3. Dry Ice, CO₂

molar mass of dry ice = 44 g/mol

amount = 1.00 g/44 g/mol = 0.0227 moles

The physical changes are:

The chemical changes are:

Matter can undergo 2 kinds of changes:

Let's consider the following text.

When my alarm went off at 70'clock, I hit snooze" a few times then finally got out of bed with excitement for my morning bowl of cereal. I poured the cereal and milk into my bowl. But before I even drank it, I could tell from the smell that the milk had soured! So, I decided to blend up a banana smoothie instead. I took some ice out of the freezer and grabbed the only banana that we had in the kitchen, which was covered in brown spots. My grumbling stomach needed to be satisfied before school so I didn't really care.

Just as I was sitting down to drink my smoothie my little brother came bounding into the kitchen and asked, Would you make some eggs and toast for me for breakfast?

"Ugh, sure," I said. I cut a piece of bread in half and put it in the toaster, then I cracked two eggs and whipped them with a fork. I reached for one of my mother's copper cooking pans in the cabinet and saw that it was completely tarnished! I didn't want to be blamed for this, so I ran to tell my mother right away. As I ran out of the kitchen slipped on that banana peel and it smeared all over the floor. As I lay on the floor with the wind knocked from me, I noticed that our family's plants were dying and that some water had evaporated from our fish tank. I made a mental note to take care of these things after school.

Just as I regained my breath and stood up, I heard glass breaking upstairs and my mother shrieking. I ran up the stairs, breathing heavily now. Steam was rolling out from the open bathroom door. When the steam cleared, saw why my mother had been screaming. Before me was my older sister standing in the bathroom with purple hair. I inferred from the scene that my mother had dropped a glass when she first saw her look what your sister did to her hair my mother yelled furiously I decided that I needed to get out of the house immediately, this morning was a crazy one!

A distinct smell was waiting up the stairway and I realized that my brother's toast must be burning! When reached the kitchen, my brother was happily spreading butter on his very browned toast. "I like my toast really crispy!" he said.

"Good I can't handle any more chaos this morning! I exclaimed. I grabbed my backpack headed out into the foggy morning air, and hopped on my slightly rusted bicycle to ride to school. A few minutes into my ride, my stomach grumbled and I realized that I never got a chance to drink my banana smoothie. Luckily, I had stashed a chocolate bar in my backpack yesterday. "Yes! I thought as I stopped pedaling, grabbed the chocolate and broke off a piece. As the chocolate melted in my mouth, I knew that my day was bound to get better!

The physical changes are:

The chemical changes are:

Learn more about physical and chemical changes here: https://brainly.com/question/17384175

Answer:

Flame tests use simple equipment, making them ideal for fieldwork. Geologists use the flame test to identify the presence of metals. Forensic scientists can use flame tests at crime scenes for quick analysis of elements present. Miners use the test for analysis of samples, particularly when prospecting. Flame tests provide a good teaching tool for chemistry students learning about emission spectra.

Unlike more sophisticated spectrographic equipment, a flame test requires only a gas burner, a hydrochloric acid solution and nichrome wire to hold the sample. The process is simple: dip the nichrome wire in the acid solution and hold it in the flame to remove any impurities, then affix the sample and hold it in the flame. The emitted colors show what metal ions the sample contains. For example, Copper emits a deep blue, Sodium bright orange and Lead a grey-white color. A table of elements and their characteristic colors helps with identification.

Explanation:

Answer:

WCl₂, WCl₄, WCl₅, WCl₆

Explanation:

Molar Mass of Tungsten = 184 g/mol

Mass of Chlorine = 35.5 g/mol

In the first compound;

Percentage of tungsten = 72.17 %

Upon solving;

72.17 % = 184

100 % = Total mass

Total mass of compound = 254.95g

Mass of chlorine = 254.95 - 184 = 70.95 (Dividing by 35.35; This is approximately 2 Chlorine atoms.

The Formular is WCl₂

In the second compound;

Percentage of tungsten = 56.45 %

Upon solving;

56.45 % = 184

100 % = Total mass

Total mass of compound = 325.95 g

Mass of chlorine = 325.95 - 184 = 141.95g (Dividing by 35.35; This is approximately 4 Chlorine atoms.

The Formular is WCl₄

In the third compound;

Percentage of tungsten = 50.91 %

Upon solving;

50.91 % = 184

100 % = Total mass

Total mass of compound = 361.42 g

Mass of chlorine =  361.42 - 184 = 177.42 (Dividing by 35.35; This is approximately 5 Chlorine atoms.

The Formular is WCl₅

In the fourth compound;

Percentage of tungsten = 46.39 %

Upon solving;

46.39 % = 184

100 % = Total mass

Total mass of compound = 396.64 g

Mass of chlorine = 396.64 - 184 = 212.64 (Dividing by 35.35; This is approximately 6 Chlorine atoms.

The Formular is WCl₆

Answer:

Explanation:

It will take 3 sodium ions to neutralize 1 phosphorus ion. That's because you need 3 plus's to satisfy the - charge on phosphorous. So the chemical formula is Na3P reflecting this fact.

Answer:

the throwing back by a body or surface of light, heat, or sound without absorbing it.

"the reflection of light"

Explanation:

i hope this helps

Answer:

the answer is B

Explanation:

When an atom has an equal number of electrons and protons, it has an equal number of negative electric charges

Answer:

19.3 g/cm3

Explanation:

A 10.0 cm3 sample of copper has a mass of 89.6 g. What is the density of copper? 19.3 g/cm3.

Answer:

Explanation:

given mass = 697 g

molar mass = mass of H × mass of N × 3 × mass of O

= 1 × 14 × 3 × 16 = 672 g

no. of moles = given mass / molar mass = 697 / 672 = 1.03 moles

Hope this helps

plz mark as brainliest!!!!!!

Answer:

[tex]p_2=5.17torr[/tex]

Explanation:

Hello.

In this case, by using the Clausius-Clapeyron Equation which allows us to relate the vapor pressure, temperature and heat of vaporization as shown below:

[tex]ln(\frac{p_1}{p_2} )=\frac{\Delta _vH}{R}(\frac{1}{T_2}-\frac{1}{T_1} )[/tex]

Whereas [tex]p_1[/tex] is 760 torr due to the normal conditions. In such a way, for computing the vapor pressure of benzaldehyde at 53.5 °C (326.65 K), we proceed as shown below:

[tex]\frac{p_1}{p_2} =exp[\frac{48800J/mol}{8.314\frac{J}{mol*K}}(\frac{1}{326.65K}-\frac{1}{451.0K} )]\\\\\frac{p_1}{p_2}=147.0[/tex]

Thus, the vapor pressure at the final T is:

[tex]p_2=\frac{p_1}{147.0}=\frac{760torr}{147.0}\\ \\p_2=5.17torr[/tex]

Best regards!

Answer:

D represents the element nitrogen which will gain three valence electrons forming a 3 ion.

Answer:

answer is

Explanation:

D

Answer:..

Explanation:

Answer:

Explanation:

From the given information;

the molecular molarity of the acid and  base are as follows:

For acid : 5 mL × 0.20 M = 0.1 mmol

For base: 5 mL × 0.20 M = 0.1 mmol

However;

0.05 m  × 1.0 M = 0.05 mmol of acid HCl

Similarly, When the acid undergoes reaction with the base; the amount of acid and base left are as follows:

Amount of acid left:

0.1 + 0.05 = 0.15 mmol

Amount of base left:

0.1 - 0.05 = 0.05 mmol

The formula for calculating the Buffer pH is:

[tex]pH = pka + log(\dfrac{Base}{Acid} )[/tex]

Recall that for Acetic, the acid dissociation constant = 4.74

Then:

[tex]pH =4.74+ log(\dfrac{0.05}{0.15} )[/tex]

[tex]pH =4.74+ log(0.333)[/tex]

pH = 4.74 -  0.4775

pH = 4.26

Therefore, the decrease in pH is about 0.48 units

Answer:

Covalent bonds

Explanation:

i'm pretty sure it's fusion but i may be wrong.

Answer:

Overall charge = -3

Explanation:

The atom of every chemical element is its smallest indivisible part. However, this atom further consists of subatomic particles namely: proton, electron, and neutron. The proton and electron are the positively charged and negatively charged particle respectively.

In a neutral atom, the amount of proton and electrons in that atom equates. However, the amount of electron and proton present in an atom determines the charge of that atom. For example, in this question, an atom is said to contain 17 protons, 17 neutrons and 20 electrons.

Since the negatively charged electrons (20) are more than the positively charged protons (17) by 3, hence, the net charge is -3.

Answer:

B

Explanation:

Mass is defined as the quantity of matter in an object.

Answer:

mass = 508 g

Explanation:

Given data:

Number of moles of Cu = 8 mol

Mass in gram = ?

Solution:

Number of moles = mass/molar mass

Molar mass of Cu is 63.5 g/mol.

Now we will put the values in formula.

8 mol = mass /63.5 g/mol

mass = 63.5 g/mol ×8 mol

mass = 508 g

The answer is number 4

Answer:

pOH = 11

pH = 3

Explanation:

Given data:

Hydrogen ion concentration = 10⁻³ mol/L

pOH of solution = ?

pH of solution = ?

Solution:

pH = -log[H⁺]

Now we will put the values.

pH = -log[ 10⁻³]

pH = -(-3) log 10

pH = 3

pOH of solution:

pOH + pH = 14

pOH = 14 - pH

pOH = 14 - 3

pOH = 11