The quality of the two-phase liquid-vapor mixture of H2O at 40°C with a specific volume of 10 m3/kg is approximately 0.1176 or 11.76%.
The quality of a two-phase liquid-vapor mixture is the fraction of the total mass that is in the vapor phase. The specific volume of a substance is the volume occupied by one kilogram of that substance.
Since the mixture is two-phase, it means it is a combination of liquid and vapor phases. At a given temperature and pressure, the quality of a mixture is determined by its specific volume.
Given:
Temperature of mixture (T) = 40°C
Specific volume of mixture (v) = 10 m3/kg
Using the saturated water table, we can find that at 40°C, the specific volume of the saturated liquid (vf) is 0.001067 m3/kg and the specific volume of the saturated vapor (vg) is 0.08608 m3/kg.
Since the mixture is two-phase, we can use the following equation to calculate the quality:
x = (v - vf)/(vg - vf)
where x is the quality of the mixture.
Plugging in the values, we get:
x = (10 - 0.001067)/(0.08608 - 0.001067)
x = 0.1176
To know more about specific volume refer to-
https://brainly.com/question/1463418
#SPJ11
The reaction between propionyl chloride and acetate ion is outlined. Starting material 1 is a carbonyl bonded to chloride and an ethyl group. Starting material 2 is a carbonyl bonded to a methyl group and O minus, which has three lone pairs. A) Complete the mechanism of the forward reaction by placing curved arrows to show the electron movements in the reactants and intermediate product
An enol intermediate and a chloroalkoxide are byproducts of reaction between Starting Material 1, which is carbonyl bonded to a chloride and an ethyl group, and Starting Material 2, which is carbonyl bonded to a methyl group and O minus with three lone pairs.
This reaction takes place in the presence of a Lewis acid catalyst. Starting Material 1's carbonyl carbon is attacked by the methyl group, which is followed by a proton transfer and tautomerization to produce the enol intermediate. Following the enol's attack on the carbonyl carbon in Starting Material 2, chloroalkoxide product is created. Curved arrows depicting movements of electrons in reactants and intermediate products can be used to complete the mechanism of the forward reaction.
To know more about Lewis acid catalyst, here
brainly.com/question/31485158
#SPJ4
--The complete Question is, What product is formed when Starting Material 1 reacts with Starting Material 2 in the presence of a Lewis acid catalyst, and complete the mechanism of the forward reaction by placing curved arrows to show the electron movements in the reactants and intermediate product? --
Calculate the energy required to heat a beaker of water at 18 C to boiling. The mass of the water is 70. 0 g. 24 KJ
The energy required to heat 70.0 g of water from 18°C to boiling (100°C) is 24,518.56 J.
Using the heat exchange formula,
q = mcΔT, mass of water is m, specific heat is c and temperature change is ΔT. For water, the specific heat capacity is 4.184 J/g·°C. The temperature change is,
ΔT = (100°C - 18°C) = 82°C
Therefore, the amount of energy required to heat 70.0 g of water from 18°C to boiling is,
q = m × c × ΔT
q = (70.0 g) × (4.184 J/g·°C) × (82°C)
q = 24,518.56 J
Therefore, the energy required to heat the beaker of water is 24,518.56 J.
To know more about Heat change, visit,
https://brainly.com/question/28912732
#SPJ4
A. describe the following heat equations, and identify the indicated variables.
i. q = mcꕔt; identify c.
ii. q = mlvapor; identify lvapor
iii. q = mlfusion; identify lfusion
Heat equations are mathematical equations that are used to calculate the amount of heat energy transferred between two objects. The first heat equation, q = mcꕔt, relates the amount of heat transferred (q) to the mass of the object (m), the specific heat capacity (c), and the temperature change (ꕔt).
The specific heat capacity is the amount of heat energy required to raise the temperature of one gram of a substance by one degree Celsius. The second heat equation, q = mlvapor, relates the amount of heat required to vaporize a substance (q) to the mass of the substance (m) and the latent heat of vaporization (lvapor).
The latent heat of vaporization is the amount of heat required to transform a unit mass of a substance from a liquid phase to a gaseous phase. Finally, the third heat equation, q = mlfusion, relates the amount of heat required to melt a substance (q) to the mass of the substance (m) and the latent heat of fusion (lfusion).
The latent heat of fusion is the amount of heat required to transform a unit mass of a substance from a solid phase to a liquid phase.
to know more about Heat equations refer here
https://brainly.com/question/28205183#
#SPJ11
2.
for the reaction c + 2h2 - ch4, how many grams of hydrogen are required
to produce 0.6 moles of methane, ch4 ?
cannu help em do the whole paper
1.21 grams of hydrogen are required to produce 0.6 moles of methane (CH₄) in the given reaction.
The given reaction is:
C + 2H₂ → CH₄
We can see that 2 moles of hydrogen (H₂) are required to produce 1 mole of methane (CH₄) according to the balanced chemical equation. Therefore, to produce 0.6 moles of methane, we will need 2 times as many moles of hydrogen, which is:
number of moles of hydrogen = 2 × number of moles of methane
number of moles of hydrogen = 2 × 0.6 moles
number of moles of hydrogen = 1.2 moles
To convert the number of moles of hydrogen to grams, we need to use the molar mass of hydrogen, which is approximately 1.008 g/mol. Thus, the mass of hydrogen required can be calculated as:
mass of hydrogen = number of moles of hydrogen × molar mass of hydrogen
mass of hydrogen = 1.2 moles × 1.008 g/mol
mass of hydrogen = 1.21 g
To learn more about hydrogen follow the link:
https://brainly.com/question/31018544
#SPJ4
The complete question is:
For the reaction C+2H₂ → CH₄, how many grams of hydrogen are required to produce 0.6 moles of methane, CH₄?
Calculate the pressure of methane gas at 60degree celcius when the initial pressure was 102 650 pascal's at 76 degree celsius.the volume was kept constant with the fixed amount of a gas.
To calculate the pressure of methane gas at 60 degrees Celsius, we can use the ideal gas law equation:
P1/T1 = P2/T2
Where P1 denotes the starting pressure, T1 the starting temperature, P2 the desired final pressure, and T2 the desired final temperature.
We'll need to convert the temperatures to Kelvin, as the ideal gas law equation requires temperature in Kelvin.
Initial temperature (T1) = 76 + 273.15 = 349.15 K
Final temperature (T2) = 60 + 273.15 = 333.15 K
We can now enter the values we have:
102650/349.15 = P2/333.15
Solving for P2:
P2 = (102650 * 333.15)/349.15
P2 = 98,066.86 Pascal's
Therefore, the pressure of methane gas at 60 degrees Celsius when the initial pressure was 102650 Pascal's at 76 degrees Celsius, with constant volume and fixed amount of gas, is 98,066.86 Pascal's.
What do you mean by Ideal gas law?
The behaviour of an Ideal gas is described by the Ideal gas law, a key equation in thermodynamics. PV = nRT is the formula for this equation, where P is the gas's pressure, V is its volume, n is the number of moles, R is the global gas constant, and T is the gas's absolute temperature.
The Ideal gas law assumes that the gas is composed of a large number of small particles that are in constant random motion and that there are no intermolecular forces between the particles. It also assumes that the volume of the gas molecules is negligible compared to the volume of the container in which the gas is held.
The Ideal gas law can be used to determine the pressure, volume, temperature, or number of moles of an ideal gas, given the values of the other variables. It is particularly useful in applications such as thermodynamics, chemistry, and engineering, where it can be used to analyze and design gas-powered systems and processes.
To know more about Ideal gas law:
https://brainly.com/question/28257995
#SPJ11
What percentage of isopropyl alcohol is best for disinfecting?.
Isopropyl alcohol (IPA) is an effective disinfectant when used in the appropriate concentration.
The Centers for Disease Control and Prevention (CDC) recommends using solutions with at least 70% IPA for disinfecting surfaces against COVID-19.
Higher concentrations (e.g., 90-99%) of isopropyl alcohol may evaporate too quickly to be effective, while lower concentrations (e.g., 50%) may not be strong enough to kill certain types of germs.
It is also important to follow proper application procedures and allow sufficient contact time for the disinfectant to work effectively.
To know more about Isopropyl alcohol refer to-
https://brainly.com/question/14896958
#SPJ11
A balloon contains 4 L of air at 100 kPa.
You squeeze it to a volume of 1 L.
What is the new pressure of air inside the balloon?
The concept Boyle's law is used here to determine the new pressure of air inside the balloon. For a gas the relationship between volume and pressure is expressed using Boyle's law. The new pressure is 400 kPa.
The Boyle's law states that at constant temperature, the volume of a given mass of gas is inversely proportional to its pressure. The product of pressure and volume of a given mass of gas is constant.
Mathematically PV = k
P₁V₁ = P₂V₂
P₂ = P₁V₁ / V₂
100 × 4 / 1 = 400 kPa
To know more about Boyle's law, visit;
https://brainly.com/question/30367067
#SPJ1
Which statement is true about a polyatomic ion? it forms metallic bonds with other ions. It forms covalent bonds with other ions. It is made of atoms that are covalently bonded together. It has a charge that is distributed over only part of the ion.
A polyatomic ion is made of atoms that are covalently bonded together, which is true about polyatomic ions.
Covalent bonds form when electrons are shared between atoms. This contrasts with ionic bonds, where ions of opposite charges attract one another.
Polyatomic ions are covalently bonded molecules that contain an electrically charged atom or group of atoms. They can have either a positive or negative charge, and they are not usually found in their isolated form. Because they are charged, they have an impact on the chemistry of the surrounding substances.
An ion with more than one atom is called a polyatomic ion. There is one nitrogen atom and four hydrogen atoms in the ammonium ion. They all make up a single ion with the formula NH+4 and a charge of 1+. One carbon atom and three oxygen atoms make up the carbonate ion, which has a 2 overall charge.
Know more about polyatomic ion:
https://brainly.com/question/6689894
#SPJ11
What volume of 0.8m naoh would be required to titrate 300 ml of 0.6 m phosphoric acid? assume a 1:1 mole ratio.
To determine the volume of 0.8m NaOH required to titrate 300 ml of 0.6m phosphoric acid, we first need to understand the mole ratio between the two substances. According to the given assumption of a 1:1 mole ratio, one mole of NaOH reacts with one mole of phosphoric acid.
Next, we can calculate the number of moles of phosphoric acid present in the solution by multiplying the molarity (0.6m) by the volume (300ml) and converting to moles using the molecular weight of phosphoric acid. This gives us 0.108 moles of phosphoric acid.
Since the mole ratio is 1:1, we will need 0.108 moles of NaOH to completely titrate the phosphoric acid. To determine the volume of 0.8m NaOH required to provide 0.108 moles, we can use the formula:
moles = molarity x volume (in liters)
Rearranging this equation, we get:
volume (in liters) = moles / molarity
Substituting the values, we get:
volume (in liters) = 0.108 moles / 0.8m = 0.135 liters
Multiplying this by 1000ml/liter, we get the final answer:
Volume of 0.8m NaOH required = 135 ml.
To know more about phosphoric acid refer here
https://brainly.com/question/3700851#
#SPJ11
The first law the of thermodynamic also known as the "Law of Conservation of Mass" states that
A. heat changes occur during chemical and physical changes.
B. there are two types of energy, kinetic and potential
C. In any chemical or physical change, energy cannot be created or destroyed, only transformed in form.
D. energy is the capacity to do work or to supply heat
In any chemical or physical change, energy cannot be created or destroyed, only transformed in form.
option C.
What is the first law of thermodynamics?The first law of thermodynamics is known as the law of Conservation of Energy.
This law states that energy can neither be created nor destroyed but can be converted from one form to another.
So the first law of thermodynamics is not known as the "Law of Conservation of Mass", but rather as the "Law of Conservation of Energy".
The statement that best corresponds to the first law of thermodynamics is option C: "In any chemical or physical change, energy cannot be created or destroyed, only transformed in form."
Learn more about first law of thermodynamics here: https://brainly.com/question/26035962
#SPJ1
Food web
wolf
rabbit
deer
plants
i
a student drew a basic food web of a forest ecosystem.
part a: describe what the arrows represent in the food web
part b: explain why the ecosystem supports fewer wolves than deer
Part a: The arrows in the food web represent the flow of energy and nutrients.
Part b: Ecosystem supports fewer wolves than deer because wolves are at a higher trophic level in food chain.
Part a: The movement of nutrients and energy from one organism to another is depicted by arrows in food chain. They specifically point to the direction of matter and energy transfer when one organism feeds another.
Part b: Due to wolves' higher trophic level in food chain, the ecology can only support a smaller population of them than deer. Due to energy loss from heat and metabolism, the amount of energy available at each level of the food chain diminishes as it progresses up the chain.
To know more about trophic level, here
brainly.com/question/13267084
#SPJ4
An HCl solution has a concentration of 0. 09714 M. Then 10. 00 mL of this solution was then diluted to 250. 00 mL in a volumetric flask. The diluted solution was then used to titrate 250. 0 mL of a saturated AgOH solution using methyl orange indicator to reach the endpoint. (1pts) 1. What is the concentration of the diluted HCl solution?
Concentration of the diluted HCl solution : 0.00389 M
To find the concentration of the diluted HCl solution, we can use the equation:
C1V1 = C2V2
Where C1 is the initial concentration of the HCl solution (0.09714 M), V1 is the initial volume of the solution (10.00 mL), C2 is the final concentration of the diluted HCl solution, and V2 is the final volume of the diluted HCl solution (250.00 mL).
Plugging in the values, we get:
(0.09714 M)(10.00 mL) = C2(250.00 mL)
Solving for C2, we get:
C2 = (0.09714 M)(10.00 mL) / (250.00 mL)
C2 = 0.00389 M
Therefore, the concentration of the diluted HCl solution is 0.00389 M.
To know more about Concentration calculations: https://brainly.com/question/29404471
#SPJ11
ENDOTHERMIC
During this chemical reaction energy is absorbed. In the chemistry lab, this would be indicated by a decrease in temperature or if the reaction took place in a test tube, the test tube would feel colder to the touch. Reactions like this one absorb energy because
The reactants have less potential energy than the products
In chemistry, a chemical reaction can be classified as either endothermic or exothermic based on whether the reaction releases or absorbs energy, respectively. An endothermic reaction is one in which energy is absorbed from the surroundings, resulting in an increase in the internal energy of the system.
The term potential energy refers to the stored energy within a system due to the position or configuration of the particles that make up that system. In the case of a chemical reaction, potential energy is stored within the chemical bonds between atoms and molecules.
In an endothermic reaction, the reactants have less potential energy than the products. This is because energy is required to break the chemical bonds in the reactants, which absorbs energy from the surroundings. As a result, the products have higher potential energy than the reactants because they have absorbed energy from the surroundings during the reaction.
Examples of endothermic reactions include the process of melting ice, where energy is absorbed from the surroundings to break the bonds between water molecules, and the reaction between baking soda and vinegar, where energy is absorbed to break the bonds between the molecules of the reactants.
In summary, endothermic reactions are those that require energy to be absorbed from the surroundings. This results in the products of the reaction having more potential energy than the reactants, which have had their bonds broken and therefore have less potential energy.
To know more about endothermic refer here
https://brainly.com/question/23184814#
#SPJ11
What is the new boiling point of 35 grams of CaS dissolved in 1. 25 kg if H2O?
The new boiling point of the solution is 100°C + 0.199°C = 100.199°C.
The boiling point of a solution is dependent on the concentration of solute particles in the solvent. This can be calculated using the formula
ΔTb = Kbm
where ΔTb is the boiling point elevation, Kb is the boiling point elevation constant, and m is the molality of the solution (moles of solute per kilogram of solvent).
The molar mass of CaS is 72.14 g/mol, so we can calculate the number of moles of CaS in the solution:
35 g / 72.14 g/mol = 0.4858 mol
The molality of the solution is then:
m = 0.4858 mol ÷ 1.25 kg
m = 0.3886 mol/kg
Next, we need to find the boiling point elevation constant Kb for water. Kb for water is 0.512 °C/m.
Finally, we can calculate the boiling point elevation:
ΔTb = Kb x m
ΔTb = 0.512 °C/m x 0.3886 mol/kg
ΔTb = 0.199 °C
To learn more about boiling follow the link:
brainly.com/question/2153588
#SPJ4
4. An alkaline earth hydroxide, M(OH)2, was taken to lab for analysis. The unknown powder was poured into a flask and swirled in room temperature DI water until a saturated solution formed. This solution was then slowly filtered to remove the undissolved solid hydroxide. 28. 5 mL of this saturated solution was titrated with 0. 173 M HCl (aq). Endpoint required 25. 10 mL of the HCl (aq) solution. Calculate the Ksp for this alkaline earth hydroxide
The Ksp of a substance is the equilibrium constant for the reaction between the dissolved ions and the undissolved solid. In this case, the equation is M₂+(aq) + 2OH-(aq) ↔ M(OH)₂(s).
Knowing the volume of HCl required for the titration (25.10 mL) and the molarity of the HCl (0.173 M), the concentration of M₂+ and OH- ions in the saturated solution can be calculated. The Ksp can then be calculated using the concentration of M₂+ and OH- ions in the solution.
The Ksp can be expressed as Ksp = [M₂+][OH]⁻². To calculate the Ksp, the molarity of the HCl solution is multiplied by the volume used in the titration (25.10 mL) to get the moles of HCl used (4.35 x 10⁻³mol). This number is then divided by the volume of the saturated solution (28.5 mL) to get the concentration of M₂+ (1.53 x 10-2 M) and OH- (3.06 x 10⁻² M).
Finally, the Ksp can be calculated using the concentrations of M₂+ and OH- ions: Ksp = [1.53 x 10⁻²][3.06 x 10⁻²]2 = 4.94 x 10⁻⁵. Thus, the Ksp for this alkaline earth hydroxide is 4.94 x 10-5.
Know more about Equilibrium constant here
https://brainly.com/question/10038290#
#SPJ11
explain how polarity affects surface tension?
A 634. 5 g sample of helium absorbs 125. 7 calories of heat. The specific heat capacity of helium is 1. 241 cal/(g·°C). By how much did the temperature of this sample change, in degrees Celsius?
The temperature of the helium sample changed by approximately 0.0314 degrees Celsius.
To calculate the temperature change of the helium sample, we can use the formula:
q = mcΔT
where q is the heat absorbed (125.7 calories), m is the mass of the sample (634.5 g), c is the specific heat capacity of helium (1.241 cal/(g·°C)), and ΔT is the temperature change in degrees Celsius. We need to find ΔT.
Rearranging the formula to solve for ΔT, we get:
ΔT = q / (mc)
Now, plug in the given values:
ΔT = 125.7 cal / (634.5 g × 1.241 cal/(g·°C))
ΔT ≈ 0.0314 °C
Therefore, the temperature of the helium sample changed by approximately 0.0314 degrees Celsius.
Know more about Helium Sample here:
https://brainly.com/question/11959989
#SPJ11
A hiker inhales 598 ml of air. if the final volume of air in the lungs is 612 ml, at a body temperature of 37 degrees celsius, what was the initial temperature of the air in degrees celsius? explain.
The initial temperature of the air in degree Celsius was approximately 33.6°C.
When the hiker inhales air, the air undergoes a temperature change from the initial temperature to the body temperature, and a volume change due to the expansion of the lungs.
Using the ideal gas law, we can relate the initial and final volumes and temperatures of the air.
PV = nRT
Assuming the pressure is constant, we can rearrange the equation to:
(V₁/T₁) = (V₂/T₂)
where V1 is the initial volume of air, T₁ is the initial temperature, V₂ is the final volume of air, and T₂ is the final temperature (body temperature, 37°C).
We can substitute the given values and solve for T₁:
(V₁/T₁) = (V₂/T₂)
(T₁/V₁) = (T₂/V₂)
T₁= (T2 × V₁ / V₂
T₁ = (310.15 K × 0.598 L) / 0.612 L
T₁≈ 303.5 K
Converting to degrees Celsius, we get:
T₁ ≈ 30.5°C
To know more about ideal gas law, refer here:
https://brainly.com/question/30458409#
#SPJ11
You have twisted your ankle and need to apply a cold pack. You squeeze the bag and as the chemical reaction occurs, you can feel that the pack is getting colder. How would you classify this type of reaction? Using what you understand from our lessons in unit 4, explain how the heat transfers between the cold pack and your skin? Also, describe how the law of conservation of energy applies to this system
The type of reaction that occurs when you squeeze a cold pack is an exothermic reaction. An exothermic reaction is a chemical reaction that releases energy in the form of heat or light. In this case, the reaction between the chemicals inside the cold pack releases heat, which is transferred to your skin when you apply the pack.
The heat transfer between the cold pack and your skin occurs through conduction. Conduction is the transfer of heat between objects that are in direct contact with each other. When you apply the cold pack to your skin, the heat from your skin is transferred to the cold pack through conduction. As the heat is transferred, the cold pack gets warmer and your skin gets cooler.
The law of conservation of energy applies to this system because energy cannot be created or destroyed, only transferred from one form to another. In this case, the chemical reaction inside the cold pack releases energy in the form of heat, which is transferred to your skin through conduction. As the heat is transferred, the temperature of the cold pack decreases, while the temperature of your skin decreases. However, the total amount of energy in the system remains constant.
In summary, when you apply a cold pack to a twisted ankle, the chemical reaction that occurs is an exothermic reaction. The heat transfer between the cold pack and your skin occurs through conduction, and the law of conservation of energy applies to the system as the total amount of energy remains constant.
To know more about exothermic reaction refer here
https://brainly.com/question/10373907?referrer=searchResults
#SPJ11
which of the following statements correctly describe protecting groups? select all statements that apply. multiple select question. a reactive functional group is converted into another functional group that does not interfere with the desired reaction. when the oh group of an alcohol is reacted with tbdmscl/imidazole the resulting tbdms ether is known as a protecting group. protecting groups must be easily removed (deprotection) to regenerate the original functional group.
The statements correctly describe protecting groups are :
"A reactive functional group converted to another functional group and it will not interfere desired reaction."
"The Protecting group easily removed (deprotection) to the regenerate original functional group."
The protecting group are the molecular formula that will be introduced the specific functional group and which is present in the poly-functional molecule and the protecting group block the reactivity under the some reaction conditions and which is needed to make the modifications in molecule.
The protecting group readily and the protecting group is selectively introduced to functional group in poly-functional molecule. Protecting group is capable of the selectively removed in under some of the mild conditions when protection is no more longer required.
To learn more about functional group here
https://brainly.com/question/14618322
#SPJ4
1. A gas takes up a volume of 10 ml, has a pressure of 6 atm, and a temperature of 100 K. What is the new volume of the gas at stp?
2. The gas in an aerosol can is under a pressure of 8 atm at a temperature of 45 C. It is dangerous to dispose of an aerosol can by incineration. (V constant)What would the pressure in the aerosol can be at a temperature of 60 C ?
3. A sample of nitrogen occupies a volume of 600mL at 20 C. What volume will it occupy at STP?(P constant)
The new volume of the gas at STP is 16.36 ml, the pressure in the aerosol at the 60 degree temperature is 9.46 atm and the volume that it will occupy is 557.66 m.
1. We must apply the combined gas law equation to determine the new volume of the gas at STP,
P₁V₁/T₁ = P₂V₂/T₂.
At STP, the pressure is 1 atm and the temperature is 273 K.
Plugging in the values, we get:
6 atm * 10 ml / 100 K = 1 atm * V₂/273 K
V₂ = 16.36 ml (rounded to two decimal places)
2. To find the new pressure of the gas in the aerosol can at a temperature of 60 C, we can use the ideal gas law equation: PV = nRT, where n is the number of moles of gas and R is the gas constant,
P₁/T₁ = P₂/T₂.
Plugging in the values, we get:
8 atm/(45 + 273) K = P₂/(60 + 273) K
P₂ = 9.46 atm (rounded to two decimal places)
3. Using the relation, V₁/T₁ = V₂/T₂. At STP, the temperature is 273 K.
Plugging in the values, we get:
600 ml / (20 + 273) K = V2 / 273 K
V₂ = 557.66 ml (rounded to two decimal places)
To know more about ideal gas equation, visit,
https://brainly.com/question/27870704
#SPJ4
16. Silver reacts with hydrogen sulphide gas, and oxygen according to the reaction:
4Ag(s) + 2H,S(g) + O2(g) + 2Ag2S(s)+ 2H2O(g)
How many grams of silver sulphide are formed when 1. 90 g of silver reacts with 0. 280 g of
hydrogen sulphide and 0. 160 g of oxygen?
Total, 1.77 g of silver sulfide are formed, when 1. 90 g of silver reacts with 0.
Balanced chemical equation for the reaction is;
4Ag(s) + 2H₂S(g) + O₂(g) → 2Ag₂S(s) + 2H₂O(g)
To determine the limiting reactant, we need to compare the number of moles of each reactant to their stoichiometric ratio in the balanced equation.
First, we need to convert the given masses of silver, hydrogen sulfide, and oxygen to moles;
molar mass of Ag = 107.87 g/mol
moles of Ag = 1.90 g / 107.87 g/mol
= 0.0176 mol
molar mass of H₂S = 2(1.01 g/mol) + 32.06 g/mol = 34.08 g/mol
moles of H₂S = 0.280 g / 34.08 g/mol = 0.00821 mol
molar mass of O₂ = 2(16.00 g/mol) = 32.00 g/mol
moles of O₂ = 0.160 g / 32.00 g/mol = 0.00500 mol
Next, we need to compare the number of moles of each reactant to their stoichiometric ratio in the balanced equation;
Ag ; H₂S ; O₂ = 4 : 2 : 1
The stoichiometric ratio tells us that we need 2 moles of H2S and 0.5 moles of O₂ for every 4 moles of Ag.
Let's calculate the number of moles of each reactant we actually have, starting with H₂S;
H₂S is the limiting reactant if it produces fewer moles of Ag₂S than either of the other reactants. We can calculate the number of moles of Ag₂S that each reactant would produce, assuming that it is the limiting reactant;
If H₂S is the limiting reactant;
moles of Ag₂S = (0.00821 mol H₂S) x (2 mol Ag₂S / 2 mol H₂S)
= 0.00821 mol
If O₂ is the limiting reactant;
moles of Ag₂S = (0.00500 mol O₂) x (2 mol Ag2S / 1 mol O₂)
= 0.0100 mol
If Ag is the limiting reactant;
moles of Ag₂S = (0.0176 mol Ag) x (0.5 mol Ag₂S / 4 mol Ag)
= 0.00220 mol
Since H₂S produces the fewest moles of Ag₂S, it is the limiting reactant.
To calculate the mass of Ag₂S produced, we can use the number of moles of Ag₂S produced by the limiting reactant:
mass of Ag₂S = (0.00821 mol Ag₂S) x (2 x 107.87 g/mol)
= 1.77 g
Therefore, 1.77 g of silver sulfide are formed.
To know more about silver sulfide here
https://brainly.com/question/31158390
#SPJ4
If the boiling point of ethanol went up 6. 8 degrees, how many grams of PbCl4 were added to 2700 grams of ethanol? round to nearest tenth
Approximately 5272.2 grams of PbCl4 were added to 2700 grams of ethanol to increase the boiling point by 6.8 degrees.
To determine the grams of PbCl4 added to 2700 grams of ethanol, causing the boiling point to increase by 6.8 degrees, we will use the molality-based boiling point elevation formula, which is:
ΔTb = Kb * m
Here, ΔTb is the change in boiling point (6.8 degrees), Kb is the molal boiling point elevation constant of ethanol (1.22 °C kg/mol), and m is the molality (moles of solute per kg of solvent).
First, we need to find the molality (m) of the solution:
6.8 = 1.22 * m
m = 6.8 / 1.22 ≈ 5.57 mol/kg
Now, we can calculate the moles of PbCl4 added to the ethanol:
5.57 mol/kg * (2700 g / 1000 g/kg) ≈ 15.03 mol of PbCl4
Next, we need to find the molar mass of PbCl4:
Pb: 207.2 g/mol
Cl: 35.45 g/mol
Molar mass of PbCl4 = 207.2 + (4 * 35.45) ≈ 350.6 g/mol
Finally, we can calculate the grams of PbCl4 added to the ethanol:
15.03 mol * 350.6 g/mol ≈ 5272.2 g
Therefore, approximately 5272.2 grams of PbCl4 were added to 2700 grams of ethanol to increase the boiling point by 6.8 degrees.
To know more about ethanol, visit:
https://brainly.com/question/25002448#
#SPJ11
A current of 4. 82 A4. 82 A is passed through a Sn(NO3)2Sn(NO3)2 solution. How long, in hours, would this current have to be applied to plate out 6. 70 g6. 70 g of tin
The current would have to be applied for approximately 10.33 hours to plate out 6.70 g of tin.
The amount of tin plated out can be calculated using Faraday's law of electrolysis, which states:
Mass of substance plated = (Current x Time x Atomic weight) / (Valency x Faraday's constant)
The atomic weight of tin is 118.71 g/mol, and its valency is 2 (since it forms Sn2+ ions in the solution). The Faraday's constant is 96,485 C/mol.
Plugging in the given values, we get:
6.70 g = (4.82 A x t x 118.71 g/mol) / (2 x 96485 C/mol)
Solving for t, we get:
t = (6.70 g x 2 x 96485 C/mol) / (4.82 A x 118.71 g/mol)
t = 10.33 hours
Therefore, the current would have to be applied for approximately 10.33 hours to plate out 6.70 g of tin.
To know more about Faraday's law refer to-
https://brainly.com/question/1640558
#SPJ11
calculate the volume of 0.150 m hydrochloric acid required to completely neutralize 25.0 ml of 0.250 m iron (iii) hydroxide.
0.125 L HCl solution, or 125 mL HCl solution (Depending on the units requested)
Explanation:Major steps:
1. Determine the chemical formulas for each compound
2. Write the unbalanced chemical equation, and balance it
3. Use dimensional analysis to determine the amount of acid needed.
Step 1. Determine the chemical formulas for each compound
hydrochloric acid is [tex]HCl[/tex]. This is from memorization of nomenclature, or consulting a resource.
Iron (iii) hydroxide is [tex]Fe(OH)_3[/tex] . This is from memorization of nomenclature, knowing that the charge on "hydroxide" is a negative 1, and that 3 hydroxide ions will be needed to balance the charge with a Iron (iii), or consulting a resource.
Step 2. Write the unbalanced chemical equation, and balance it
For "neutralization reactions", an "Acid" and a "Base" will combine to form Water and a "salt".
Unbalanced chemical equation:
[tex]HCl + Fe(OH)_{3} \rightarrow H_{2}O+ FeCl_{3}[/tex]
Balance the equation by increase the number of "Chlorines" on the left, and the number of "hydroxides" (trapped in the 'water') on the right.
Balanced chemical equation:
[tex]3HCl + Fe(OH)_{3} \rightarrow 3H_{2}O+ FeCl_{3}[/tex]
Step 3. Use dimensional analysis to determine the amount of acid needed.
Knowing we have 25.0mL of Iron (iii) hydroxide solution (in milliliters), we first convert to Liters (since concentrations for "molarity" are measured in moles per Liter).
Then convert to convert to moles of Iron(iii) hydroxide using the solution's concentration.
Convert to moles of hydrochloric acid using the mole ratio from the balanced chemical equation.
Lastly convert to volume of the hydrochloric acid solution using that solution's concentration:
[tex]\dfrac{25.0 \text{ mL } Fe(OH)_3 \text{ solution}}{1} * \dfrac{1 \text{ L }}{1000 \text{ mL }} * \dfrac{0.25 \text{ mol } Fe(OH)_3 }{1 \text{ L } Fe(OH)_3 \text{ solution}} * \dfrac{3 \text{ mol } HCl }{1 \text{ mol } Fe(OH)_3 } * \dfrac{1 \text{ L } HCl \text{ solution} }{0.150 \text{ mol } HCl }=[/tex]
[tex]=0.125 \text{ L } HCl \text{ solution}[/tex]
If the requested answer should be measured in milliliters, one last conversion will yield the answer:
[tex]\dfrac{0.125 \text{ L } HCl \text{ solution}}{1} * \dfrac{1000 \text{ mL }}{1 \text{ L }} = 125 \text{ mL } HCl \text{ solution}[/tex]
Observe that the original measurements use 3 significant figures, so each answer should use 3 significant figures (both answers do).
What is the resultant pressure if 3. 5 mol of
ideal gas at 273 K and 0. 96 atm in a closed
container of constant volume is heated to
619 K? Answer in units of atm
The resultant pressure after heating the ideal gas to 619 K is approximately 2.17 atm.
To find the resultant pressure of the ideal gas after being heated, we can use the Ideal Gas Law formula, which is:
PV = nRT
where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. Since the volume is constant, we can compare the initial and final states of the gas using the following equation:
P1/T1 = P2/T2
Given the initial conditions: P1 = 0.96 atm, T1 = 273 K, and the final temperature T2 = 619 K. We need to find the final pressure P2.
0.96 atm / 273 K = P2 / 619 K
Now, solve for P2:
P2 = (0.96 atm * 619 K) / 273 K
P2 ≈ 2.17 atm
Therefore, the resultant pressure after heating the ideal gas to 619 K is approximately 2.17 atm.
Know more about Ideal Gas here:
https://brainly.com/question/31463642
#SPJ11
Assume that you put the same amount of room-temperature air
in two tires. if one tire is bigger than the other, how will air
pressure in the two tires compare?
the bigger tire will have greater air pressure.
b the smaller tire will have greater air pressure.
both tires will have the same air pressure.
dnot enough information is provided to know the
answer
The larger tire will have a greater volume, but the amount of air in each tire is the same, so the pressure in both tires will be the same. The correct answer is the option: C.
The pressure of a gas is related to its temperature, volume, and the number of molecules present, according to the Ideal Gas Law: PV = nRT,
Assuming the temperature, number of molecules, and the amount of air in both tires are the same, the pressure of the air in the tires will depend only on the volume of the tires. Therefore, both tires will have the same air pressure. The correct answer is C.
To know more about Ideal Gas Law, here
brainly.com/question/13821925
#SPJ4
--The complete Question is, Assume that you put the same amount of room-temperature air in two tires. if one tire is bigger than the other, how will air pressure in the two tires compare?
A. the bigger tire will have greater air pressure.
B. the smaller tire will have greater air pressure.
C. both tires will have the same air pressure. --
What volume of 10% (w/v) solution of Na2CO3 will be required to neutralise 100 mL of HCI Solution containing 3.63
g of HCl?
468.5 mL of 10% Na2CO3 solution is required to neutralize 100 mL of HCl solution containing 3.63 g of HCl.
To solve this problemCalculating the amount of HCl in moles is the first step.
mol = 3.63 g / 36.46 g/mol
moles = 0.0995
mol mass HCl = mass HCl / molar mass HCl
The chemical equation for the neutralization of HCl and Na2CO3 is as follows:
2HCl + Na2CO3 → 2NaCl + CO2 + H2O
The equation states that 2 moles of HCl and 1 mole of Na2CO3 react. As a result, the amount of Na2CO3 needed to neutralize the HCl, in moles, is:
moles Na2CO3 = moles HCl / 2
moles Na2CO3 = 0.0995 mol / 2
moles Na2CO3 = 0.0498 mol
The volume of 10% Na2CO3 solution needed to produce 0.0498 mol of Na2CO3 may now be calculated using the definition of molarity:
moles Na2CO3 = (Na2CO3 concentration) x (Na2CO3 volume).
0.1 g/mL x (volume Na2CO3 / 1000 mL) x (105.99 g/mol) = 0.0498 mol
Na2CO3's volume = (0.0498 mol x 1000 mL) / (0.1 g/mL x 105.99 g/mol).
Na2CO3 = 468.5 mL of volume
Therefore, 468.5 mL of 10% Na2CO3 solution is required to neutralize 100 mL of HCl solution containing 3.63 g of HCl.
Learn more about molarity here : brainly.com/question/14469428
#SPJ1
The pressure of a balloon begins at 2. 45 atm and a volume 2. 00 L. If the balloon's pressure increases to 3. 60 atm then what does the volume change to?
The volume changes to 1.36 L, under the condition pressure of a balloon begins at 2. 45 atm and a volume 2. 00.
For this problem we have to apply Boyle's law that states at constant temperature, the pressure and volume of a gas are inversely proportional to each other.
Then, pressure increases, volume decreases and vice versa. The formula for Boyle's law is
P1V1 = P2V2
Here
P1 and V1 = initial pressure and volume
P2 and V2 = final pressure and volume
Applying this formula, we can evaluate the final volume of the balloon
P1V1 = P2V2
(2.45 atm)(2.00 L) = (3.60 atm)(V2)
V2 = (2.45 atm)(2.00 L) / (3.60 atm)
V2 = 1.36 L
To learn more about Boyle's law
https://brainly.com/question/1696010
#SPJ4
A solution is prepared by dissolving 8.50 g of c6h12o6 in 4.15 g of cyclohexane. what is the % mass of c6h12o6 in the new solution? round your answer to 1 decimal places.
The % mass of C6H12O6 in the new solution is approximately 67.2%.
We can calculate the mass percentage of C6H12O6 in the new solution using the following formula:
% mass = (mass of C6H12O6 / total mass of solution) x 100%
First, we need to calculate the total mass of the solution by adding the mass of C6H12O6 and the mass of cyclohexane:
total mass of solution = 8.50 g + 4.15 g = 12.65 g
Next, we can calculate the mass percentage of C6H12O6 in the solution:
% mass = (8.50 g / 12.65 g) x 100% ≈ 67.2%
Therefore, the % mass of C6H12O6 in the new solution is approximately 67.2%.
To know more about mass percentage refer here:
https://brainly.com/question/19694949
#SPJ11
