Answer:
I answered this in your recent post of this question.
Explanation:
Hope that this helps you out! :)
If you have any questions please put them in the comment section below this answer.
Have a great rest of your day/night!
Please thank me on my profile if this answer has helped you.
1. Which is a chemical property of wood?
conductivity
flammability
malleability
Answer:
Wood consists mainly of organic substances (99% of the total mass). Elemental chemical composition of wood of different breeds is practically the same. Absolutely dry wood on average contains 49% of carbon, 44% of oxygen, 6% of hydrogen, 0.1-0.3% of nitrogen. When burning wood remains its inorganic part - ash.
So the answer is flammability because wood is flammable.
Calcium Carbonate decomposes at 1200°C to form carbon dioxide and
calcium oxide. If 25 L of carbon dioxide are collected at 1200°C, what will
the volume of this gas be after it cools to 25°C?
This is a Charles' Law problem: V1/T1 = V2/T2. As the temperature of a fixed mass of gas decreases at a constant pressure, the volume of the gas should also decrease proportionally.
To use Charles' Law, the temperature must be in Kelvin (x °C = x + 273.15 K). We want to solve Charles' Law for V2, which we can obtain by rearranging the equation into V2 = V1T2/T1. Given V1 = 25 L, T1 = 1200 °C (1473.15 K), and T2 = 25 °C (298.15 K):
V2 = (25 L)(298.15 K)/(1473.15 K) = 5.1 L.
The volume of this gas will be "5.1 L".
Given:
[tex]V_1 = 25 \ L[/tex][tex]T_1 = (1200+ 273 )K[/tex][tex]= 1473 \ K[/tex]
[tex]T_2 = (25+ 273)K[/tex][tex]= 298 \ K[/tex]
As we know,
→ [tex]\frac{V_1}{V_2} = \frac{T_1}{T_2}[/tex]
By substituting the values, we get
→ [tex]\frac{25 \ L}{V_2} = \frac{1473 \ K}{293 \ K}[/tex]
→ [tex]V_2 = \frac{25\times 298}{1473} \ L[/tex]
→ [tex]= 5.1 \ L[/tex]
Learn more:
https://brainly.com/question/21437107
Jessica jogs on a path that is 25 km long to get to a park that is south of the jogging path if it takes us a good 2.5 hours then what is her speed?
La capacidad calorífica del aluminio es de 0.9 J/g C. Determine la energía necesaria calentar un bloque de aluminio de 850 g de 22.8 grados a 94.6 grados Celcius.
Answer:
La energía necesaria para calentar el bloque de aluminio es 54927 J.
Explanation:
Se denomina calorimetría a la medición y el cálculo de las cantidades de calor que intercambia un cuerpo o un sistema.
De esta manera, entre el calor y la temperatura existe una relación de proporcionalidad directa (Dos magnitudes son directamente proporcionales cuando existe una constante de manera que cuando una de las magnitudes aumenta, la otra también; y lo mismo ocurre cuando alguna de las dos disminuye.). La constante de proporcionalidad depende de la sustancia que constituye el cuerpo como de su masa, y resulta el producto del calor específico por la masa del cuerpo. Entonces, la ecuación que permite calcular intercambios de calor es:
Q=c*m*ΔT
Donde Q es el calor intercambiado por un cuerpo de masa m, constituido por una sustancia de calor específico c y donde ΔT es la variación de temperatura.
En este caso:
c= 0.9 [tex]\frac{J}{g*C}[/tex]m= 850 gΔT= Tfinal - Tinicial= 94.6 C - 22.8 C= 71.8 CReemplazando:
Q= 0.9 [tex]\frac{J}{g*C}[/tex]*850 g* 71.8 C
y resolviendo se obtiene:
Q= 54927 J
La energía necesaria para calentar el bloque de aluminio es 54927 J.
8. Calculate the pH of a solution if the [OH-] concentration is 0.015 M.
A) 1.82
B) 8.82
C) 12.18
D) 4.32
Answer:
1.82
Explanation:
pH is given by the equation
Explain the equilibrium law as it relates to chemical equilibrium. Describe the types of stresses that cause chemical reactions in equilibrium to make more products.
When a reaction has reached equilibrium with a given set of conditions, if the conditions are not changed, the reaction will remain at equilibrium forever. The forward and reverse reactions continue at the same equal and opposite rates and the macroscopic properties remain constant.
It is possible, however, to disturb that equilibrium by changing conditions. For example, you could increase the concentration of one of the products, or decrease the concentration of one of the reactants, or change the temperature. When a change of this type is made within a reaction at equilibrium, the reaction is no longer in equilibrium. When you alter something in a reaction at equilibrium, chemists say that you put stress on the equilibrium. When this occurs, the reaction will no longer be in equilibrium and the reaction itself will begin changing the concentrations of reactants and products until the reaction comes to a new position of equilibrium. How a reaction will change when a stress is applied can be explained and predicted. That is the topic of this section.
4. The speed of a wave is 75m/s. If the wavelength of the wave is 5m, what is the frequency of the
wave?
Answer:
15Hz
Explanation:
75m/s / 5m = 15Hz
I hope this helps u! :D
Answer: 15?
Explanation: You take the formula of velocity=length/frequency and change it to velocity/length=frequency to accommodate the values you have.
how do particles of salt and dust affect cloud formation?
Answer:
Cloud formation: Insoluble dust particles can form cloud droplets that affect global and regional climate. Scientists have long recognized the importance of soluble particles, such as sea salt and sulfates, in creating the droplets that form clouds and lead to precipitation.
TRUE OR FALSE
Astronomers use spectroscopes to identify elements in stars because each element produces
unique emission spectrum
Answer:
True!
Explanation:
A spectrum is simply a chart or a graph that shows the intensity of light being emitted over a range of energies. Have you ever seen a spectrum before? Probably. Nature makes beautiful ones we call rainbows. Sunlight sent through raindrops is spread out to display its various colors (the different colors are just the way our eyes perceive radiation with slightly different energies).
Hope i helped!
Why are large crystals of sodium chloride used instead of small
crystals when making ice cream
Answer:
Sodium chloride is added to the ice to lower the freezing point of the ice. Large crystals dissolve more slowly than small crystals. This allows time for the ice cream to freeze more evenly.
Explanation:
How many moles are present in 5.24g of H2O?
Answer:
The answer is 18.01528.
We assume you are converting between grams H2O and mole.
Explanation:
Net ionic equation for sodium carbonate and sulfuric acids?
Answer:
CO₃²¯(aq) + 2H⁺(aq —> H₂O(l) + CO₂(g)
Explanation:
The net ionic equation for sodium carbonate (Na₂CO₃) and sulfuric acid (H₂SO₄) can be obtained as follow:
Na₂CO₃ + H₂SO₄ —>
In solution, Na₂CO₃ and H₂SO₄ will dissociate as follow:
Na₂CO₃(aq) —> 2Na⁺(aq) + CO₃²¯(aq)
H₂SO₄(aq) —> 2H⁺(aq) + SO₄²¯(aq)
Na₂CO₃(aq) + H₂SO₄(aq) —>
2Na⁺(aq) + CO₃²¯(aq) + 2H⁺(aq) + SO₄²¯(aq) —> 2Na⁺(aq) + SO₄²¯(aq) + H₂O(l) + CO₂(g)
Cancel out the spectator ions (i.e Na⁺ and SO₄²¯) to obtain the net ionic equation.
CO₃²¯(aq) + 2H⁺(aq —> H₂O(l) + CO₂(g)
A gas bubble occupies 14.0 mL, what is this volume into L?
What determines crystal size in minerals formed by lava or magma?
Answer:
When magma cools, crystals form because the solution is super-saturated with respect to some minerals. If the magma cools quickly, the crystals do not have much time to form, so they are very small. If the magma cools slowly, then the crystals have enough time to grow and become large.
Explanation:
You place a balloon in a closed chamber at standard temperature and pressure (STP). You triple the chamber pressure.
What happens to the balloon?
The volume stays the same.
The volume increases to three times its original volume.
The temperature must also change for the volume to change.
The volume decreases to one-third of its original volume.
Answer:
it pops?
Explanation:
An aerosol can contains gases under a pressure
of 4.4 atm at 26 ◦C. If the can is left on a
hot sandy beach, the pressure of the gases
increases to 4.68 atm. What is the Celsius
temperature on the beach?
Answer in units of ◦C.
Answer:
e
Explanation:
and e
Sodium chlorate is used to produce yellow fireworks. Heating sodium chlorate creates oxygen and sodium chloride. How many moles of sodium chlorate is needed to produce 5.70 moles of oxygen?
https://www.geneva304.org/Downloads/ch%209%20key6.pd
this is what i found add an "f" at the end and search
The molecular weight of PCl3 is blank
amu.
Answer:
Yes you are correct
Explanation:
But the spelling is black amu
Is this true or false ?
Answer:
Its true
Explanation:
Distance time graphs
Ch.3, S5, page
69, BOS
Calculate the mass of 1.5 moles of calcium atoms.
NA=6x 1023
Mass=
g give your answer to two significant figures.
Answer:
60g
Explanation:
The molar mass of a substance (Atom or molecule) is defined as the mass in grams that 1 mole of substance (6x10²³ particles of this substance) weighs. Using the periodic table of elements we can know the molar mass of each atom.
For example, the molar mass of Calcium is 40.078g / mol.
That means the mass of 1.5 moles of calcium atoms must be:
1.5 moles * (40.078g / mol) =
60gplease help i will make you brainliest A water feature that could be a source of groundwater for humans is found at a location on a hillside where Earth’s surface is lower than the water table.
What type of feature might be observed at this location?
spring
aquifer
artesian well
unsaturated zone
Answer:
Spring
Explanation:
Spring is a place where water moving underground finds an opening to the land surface and emerges, sometimes as just a trickle, maybe only after a rain, and sometimes in a continuous flow. ... Note: This section of the Water Science School discusses the Earth's "natural" water cycle without human interference.
Answer:
aquifer=b
Explanation:
hope it helps
When we look at heat transfer problems that include phase transitions, there can bemanynec-essary steps. Consider a material of massmthat undergoes two phase transitions: from solid toliquid and then from liquid to gas. It starts at an initial temperature ofT0(well below the meltingtemperature ofTm) and it heated until it is a gas at a temperature ofTf(well above the boilingtemperature ofTv). How many different steps (simple temperature changes or phase transitions)of heat transfer would you need for this problem
Answer:
There would be 3 temperature changes and 2 phase transitions
Explanation:
The temperature of the material would first increase from T0 to Tm (its melting point)- This is one temperature change.
It would the change from solid to liquid at its melting point Tm.- This is one phase transition.
Its temperature would then increase from its melting point Tm to its boiling point Tv -This is another temperature change.
It would then change from liquid to gas at its boiling point Tv - This is another phase transition.
Finally, its temperature would then increase from its boiling point to T(f) - This is the third temperature change.
So, there would be 3 temperature changes and 2 phase transitions
2. Different versions of a gene
A. Allele
B. Inherited Trait
C. Gene
D. Chromosome
Answer:
a
Explanation:
Different versions of a gene are called alleles. Alleles are described as either dominant or recessive depending on their associated traits.
How many moles are there in 34.5g of calcium phosphate?
what is the formula for chlorine monobromide
Based on how to wrire chemical formulae, the formula for chlorine monobromide is BrCl.
What is chlorine mononbromide?Chlorine monobromide is a covalent compound formed from the covalent combination of chlorine and bromine.
The covalent bond is formed from the sharing of electrons between atoms chlorine and bromine.
Br2 + Cl2 ---> 2 BrCl
Tye formula of chlorinr monobromide is BrCl.
It is also known as bromine monochloride.
Therefore, the formula for chlorine monobromide is BrCl.
Learn more about chemical formula at: https://brainly.com/question/2778716
Organisms with their genetic material in a nucleus include A. Plants B. Animals C. All of these D. Fungi
Answer:
I believe it is 3. All of these.
Explanation:
Not all organisms hold their genetic code (DNA) inside a nucleus. In fact, some organisms don't have a nucleus at all but I'm pretty sure that these three do. I would select all of these.
Hope that helps and have a nice day.
Which of the following are properties of compounds formed by ionic bonding? Hint: Select the best three answers.
Select all that apply:
A : lonic compounds have lower melting points than covalent compounds.
B : lonic compounds form when combining a metal atom with a nonmetal atom.
C : lonic compounds form when combining a two metal atoms.
D : lonic compounds form when combining two or more nonmetal atoms.
E : When you dissolve an ionic compound in water, the solution conducts electricity.
F : When you dissolve an ionic compound in water, the solution does not conduct electricity
G : lonic compounds generally have higher melting points than covalent compounds.
Answer:
the correct answers are:
B
E
G
Ionic compounds are compounds that are formed between metallic ions and non-metalilc ions and have high melting and boiling points
What are ionic compounds?Ionic compounds are compounds which are formed as a result of the force of attraction between oppositely charged ions.
The properties of ionic compounds include:
lonic compounds form when combining a metal atom with a nonmetal atom. When you dissolve an ionic compound in water, the solution conducts electricitylonic compounds generally have higher melting points than covalent compoundsTherefore, ionic compounds are compounds that are formed between metallic ions and non-metallic ions and have high melting and boiling points.
Learn more about ionic compounds at: https://brainly.com/question/3293836
#SPJ6
PLEASE ME!!!! ANSWER IF YOU KNOW THE ANSWER
Answer:
organism 1
Explanation:
the arrow points away from it so that means that it is being eaten and it always starts from a producer so organism 1 is likely a producer :)
HOW DO THE STATES OF MATTER FIT INTO THE K-M THEORY? PLS NO LINKS
Answer:Matter can exist in one of three main states: solid, liquid, or gas. Solid matter is composed of tightly packed particles. A solid will retain its shape; the particles are not free to move around.
Explanation:
what are the factors that affect the rate of chemical reaction?
Answer:
surface area of a solid reactant.
concentration or pressure of a reactant.
temperature.
nature of the reactants.
presence/absence of a catalyst.
