We can see that the REE for a female with an adult weight of 150 pounds decreases as she gets older.
To calculate the REE for a person over time, we need to follow these steps:
Decide to calculate the REE for a male or female: Let's assume we want to calculate the REE for a female.
Choose an adult weight:
Let's assume the adult weight is 150 pounds.
Calculate the REE for the adult from age 18-29, 30-60, and over 60. Assume the adult maintains the same body weight at each age.
Using the data table that shows the estimation of the daily resting energy expenditure (REE), we can find the REE for the adult at each age:
Age Male (kcal/day) Female (kcal/day)
18-29 2,400-3,000 2,200-2,400
30-60 2,200-2,600 2,000-2,200
over 60 2,000-2,400 1,800-2,000
Let's use the female column to calculate the REE for the adult female who weighs 150 pounds:
For age 18-29, the REE range is 2,200-2,400 kcal/day.
Let's take the average of the range: (2,200+2,400)/2 = 2,300 kcal/day.
For age 30-60, the REE range is 2,000-2,200 kcal/day.
Let's take the average of the range: (2,000+2,200)/2 = 2,100 kcal/day.
For age over 60, the REE range is 1,800-2,000 kcal/day.
Let's take the average of the range: (1,800+2,000)/2 = 1,900 kcal/day.
Now we can record these calculations in the table:
Age Male (kcal/day) Female (kcal/day)
18-29 2,400-3,000 2,200-2,400
30-60 2,200-2,600 2,000-2,200
over 60 2,000-2,400 1,800-2,000
Therefore, we can see that the REE for a female with an adult weight of 150 pounds decreases as she gets older.
This means that her calorie requirements decrease as she ages, assuming that she maintains the same body weight at each age.
To know more about refer REE here
brainly.com/question/22779484#
#SPJ11
A wheel 2. 10 m in diameter lies in a vertical plane and rotates about its central axis with a constant angular acceleration of 3. 75 rad/s2. The wheel starts at rest at t = 0, and the radius vector of a certain point P on the rim makes an angle of 57. 3° with the horizontal at this time. At t = 2. 00 s, find the following
The initial values, radius, and angular acceleration are given. The obtained values are: angular speed = 7.50 rad/s, tangential speed = 7.88 m/s, total acceleration = 59.0 m/s², and angular position = 75.3°.
(a) To find the angular speed of the wheel at t = 2.00 s, we use the equation:
ω[tex]\omega = \omega 0 + \alpha t[/tex]
where ω0 is the initial angular speed (which is 0 since the wheel starts at rest), α is the angular acceleration, and t is the time. Thus, we have:
[tex]\omega = 0 + (3.75\;rad/s^2)(2.00 s) = 7.50\;rad/s[/tex]
Therefore, the angular speed of the wheel at t = 2.00 s is 7.50 rad/s.
(b) To find the tangential speed of point P at t = 2.00 s, we use the equation:
[tex]v = r\omega[/tex]
where r is the radius of the wheel (which is half its diameter, or 1.05 m) and ω is the angular speed we found in part (a).
Thus, we have: v = (1.05 m)(7.50 rad/s) = 7.88 m/s
Therefore, the tangential speed of point P at t = 2.00 s is 7.88 m/s.
(c) To find the total acceleration of point P at t = 2.00 s, we need to find both its tangential acceleration and radial (centripetal) acceleration. The tangential acceleration is given by:
[tex]at = r\alpha[/tex]
where r is the radius of the wheel and α is the angular acceleration. Thus, we have:
[tex]at = (1.05\;m)(3.75\;rad/s^2) = 3.94\;m/s^2[/tex]
The radial acceleration is given by: [tex]ar = v^2/r[/tex]
where v is the tangential speed we found in part (b) and r is the radius of the wheel. Thus, we have:
[tex]ar = (7.88\;m/s)^2/(1.05\;m) = 58.8\;m/s^2[/tex]
The total acceleration is then the vector sum of these two components, so:
[tex]a = \sqrt{(at^2 + ar^2)}[/tex]
[tex]a = \sqrt{[(3.94\;m/s^2)^2 + (58.8\;m/s^2)^2][/tex]
[tex]a = 59.0\;m/s^2[/tex]
Therefore, the total acceleration of point P at t = 2.00 s is [tex]59.0\;m/s^2.[/tex]
(d) To find the angular position of point P at t = 2.00 s, we use the equation:
[tex]\theta = \theta 0 + \omega 0t + (1/2)\alpha t^2[/tex]
where θ0 is the initial angular position (which is given as 57.3°), ω0 is the initial angular speed (which is 0), α is the angular acceleration, and t is the time. Thus, we have:
[tex]\theta = 57.3^{\circ} + 0 + (1/2)(3.75\;rad/s^2)(2.00 s)^2 = 75.3^{\circ}[/tex]
Therefore, the angular position of point P at t = 2.00 s is 75.3°.
To know more about acceleration refer here:
https://brainly.com/question/30660316#
#SPJ11
Complete Question:
A wheel 2. 10 m in diameter lies in a vertical plane and rotates about its central axis with a constant angular acceleration of 3. 75 rad/s2. The wheel starts at rest at t = 0, and the radius vector of a certain point P on the rim makes an angle of 57. 3° with the horizontal at this time. At t = 2. 00 s, find the following:
(a) the angular speed of the wheel.
(b) the tangential speed of the point P.
(c) the total acceleration of the point P.
(d) the angular position of the point P.
The frequency of violet light is 7. 5 x 1014 hertz. What is its wavelength in a vacuum?
The wavelength of violet light in a vacuum is approximately 3.997 x 10^-7 meters, which is equivalent to 399.7 nanometers.
The wavelength of the light in a vacuum can be calculated using the formula λ = c/f, where λ is the wavelength, c is the speed of light in a vacuum (299,792,458 meters per second), and f is the frequency of the light.
Using this formula, we can find the wavelength of the violet light as follows:
λ = c/f
λ = 299,792,458 m/s / 7.5 x 10^14 Hz
λ = 3.997 x 10^-7 meters
Therefore, the wavelength of violet light in a vacuum is approximately 3.997 x 10^-7 meters, which is equivalent to 399.7 nanometers.
In summary, the frequency of violet light is a measure of how fast it oscillates, and its wavelength in a vacuum can be calculated using the speed of light and frequency of the light. Knowing the wavelength of a particular color of light is useful in many fields, including astronomy, physics, and optics.
For more about violet light .
https://brainly.com/question/11879525
#SPJ11
What is the velocity of a soccer ball in meters per second (m/s) with a mass of 1.0 kg that is kicked from rest if the coefficient of restitution between the ball and the foot is 0.48? the initial velocity of the foot is 16.1 m/s and has a mass of 7.8 kg.
The final velocity of the soccer ball is 65.2 m/s. This is to calculate the momentum of the foot before collision. Use coefficient of restitution to calculate velocity of separation.
To find the velocity of the soccer ball after being kicked, we can use the law of conservation of momentum and the coefficient of restitution. The law of conservation of momentum states that the momentum before the collision is equal to the momentum after the collision.
Here's how we can solve the problem:
Calculate the momentum of the foot before the collision:
Momentum = mass x velocity = 7.8 kg x 16.1 m/s = 125.58 kg m/s
During the collision, some of the momentum is transferred to the ball. The amount of momentum transferred depends on the coefficient of restitution, which is given as 0.48. The coefficient of restitution is the ratio of the velocity of separation to the velocity of approach.
Use the coefficient of restitution to calculate the velocity of separation:
Velocity of separation = coefficient of restitution x velocity of approach
Velocity of separation = 0.48 x 16.1 m/s = 7.728 m/s
Calculate the velocity of the ball after the collision using the law of conservation of momentum:
Momentum before collision = Momentum after collision
(7.8 kg x 16.1 m/s) = (1.0 kg x velocity of ball) + (7.8 kg x 7.728 m/s)
125.58 kg m/s = 1.0 kg x velocity of ball + 60.38 kg m/s
Velocity of ball = (125.58 kg m/s - 60.38 kg m/s)/1.0 kg
Velocity of ball = 65.2 m/s
Therefore, the velocity of the soccer ball after being kicked is 65.2 m/s.
In summary, we can use the law of conservation of momentum and the coefficient of restitution to find the velocity of the soccer ball after being kicked. The momentum before the collision is equal to the momentum after the collision.
The coefficient of restitution is the ratio of the velocity of separation to the velocity of approach. Using these equations, we calculated the velocity of the soccer ball to be 65.2 m/s.
To know more about velocity refer here:
https://brainly.com/question/19979064#
#SPJ11
How do you convert 1440 am (amplitude modulation) to hertz (hz)?
This is because kilohertz means 1000 hertz, so by multiplying the AM frequency in kilohertz by 1000, we obtain the frequency in hertz. So 1440 kHz is equal to 1,440,000 Hz.
AM (amplitude modulation) is a type of radio transmission where the amplitude of the carrier wave is varied in proportion to the information signal.
It is specified in terms of frequency in kilohertz (kHz). To convert 1440 AM to Hz, we need to multiply it by 1000.
Therefore, 1440 AM = 1440 kHz = 1440000 Hz.
This is because kilohertz means 1000 hertz, so by multiplying the AM frequency in kilohertz by 1000, we obtain the frequency in hertz. So 1440 kHz is equal to 1,440,000 Hz.
To know more about amplitude modulation, refer here:
https://brainly.com/question/13265507#
#SPJ11
A 2. 5 kg block initially at rest is pulled to the
right along a horizontal, frictionless surface
by a constant, horizontal force of 12. 3 N.
Find the speed of the block after it has
moved 2. 9 m
The speed of the block after it has moved 2.9 m is approximately 5.14 m/s.
We can use the work-energy principle to find the speed of the block after it has moved 2.9 m. The work-energy principle states that the net work done on an object is equal to its change in kinetic energy.
Since there is no friction acting on the block, the net work done on it is equal to the work done by the applied force:
Net work = Work done by applied force = Fd
where F is the applied force and d is the distance moved by the block.
The change in kinetic energy of the block is given by:
Δ[tex]K = 1/2 mv^2 - 1/2 m(0)^2 = 1/2 mv^2[/tex]
where m is the mass of the block and v is its final velocity.
Since the net work done on the block is equal to its change in kinetic energy, we can set these two expressions equal to each other:
[tex]Fd = 1/2 mv^2[/tex]
Solving for v, we get:
[tex]v = \sqrt{(2Fd/m)[/tex]
Substituting the given values, we get:
[tex]v = \sqrt{(2 *12.3 N * 2.9 m / 2.5 kg)} = 5.14 m/s[/tex]
To know more about work-energy principle refer here
https://brainly.com/question/28043729#
#SPJ11
4. what is the gravitational attraction between two objects of mass 5,000,000kg (5.0 x 106 kg) at a distance of
100 meters from each other? estimate g as 6.67 * 10-11 n (m/kg)?
a. ion
b. .17 n
c. 57000 n
d. 2300 n
e. 1900 n
help asap no rocky
The gravitational attraction between the two objects is approximately 167.5 N, which is closest to option B. 0.17 N.
We'll use the gravitational attraction formula to find the gravitational force between two objects of mass 5,000,000 kg ([tex]5×[/tex][tex]10^{6}[/tex] kg) at a distance of 100 meters from each other, with an estimated gravitational constant (G) of [tex]6.67[/tex]×[tex]10^{-11}[/tex] N(m/kg)².
The formula is:
F = [tex]G(\frac{mM}{r^{2}})[/tex]
where F is the gravitational force, G is the gravitational constant, m₁, and m₂ are the masses of the two objects, and r is the distance between them.
F=[tex]\frac{(6.67)(10^{-11} )[(5.0)(10^{6})]^2}{(100)^2}N[/tex]
Step 1: Calculate the product of the masses:
[tex](5.0)(10^6)(5.0)(10^6) = 25(10^{12} )[/tex] kg²
Step 3: Calculate the square of the distance:
[tex]100^{2} m^{2}[/tex] = 10,000 m²
Step 4: Calculate the gravitational force:
F = [tex]\frac{(6.67)(10^{-11} )(25.0)(10^{12})}{(10,000)} N[/tex]
Step 5: Simplify the equation:
F = [tex](6.67)(25)10^{-11 + 12 - 4} N[/tex]
Step 6: Calculate the final value:
F ≈ [tex]167.5[/tex]×[tex]10^{-3}[/tex]≈ 167.5 N
To know more about the calculation of gravitational attraction visit:
https://brainly.com/question/28009700
#SPJ11
An object is being pulled along a rough table with a frictional force of 7N acting
upon the object. The object is being pulled along by a horizontal force of 18N and
weighs 30N.
To fathom this issue, we have to be utilize Newton's moment law of movement, which states that the net force acting on an question is equal to the item of its mass and increasing speed. Able to utilize this law to discover the speeding up of the object:
Net force= ma
where m is the mass of the object and a is its increasing speed.
What is the the net force of the object?In this case, the net force is the horizontal force of 18N short the frictional constrain of 7N:
Net constrain = 18N - 7N = 11N
The mass of the object is given as 30N, so we are able modify the condition to unravel for the speeding up:
a = Net force / m = 11N / 30N = 0.37 m/s^2
Hence, the object is accelerating at a rate of 0.37 m/s^2 along the table.
Learn more about newton second law from
https://brainly.com/question/25545050
#SPJ1
All the fossils that have been found over time are called the
All the fossils that have been found over time are collectively called the: fossil record.
The fossil record represents the preserved remains or traces of organisms from the past, providing valuable information about the history of life on Earth. It allows scientists to study the evolution of species, their distribution over time, and how they adapted to their environments.
The fossil record is not complete, as it depends on factors such as preservation conditions and the likelihood of a particular organism leaving behind fossils. However, it still offers a glimpse into the vast diversity of life that has existed throughout Earth's history, enabling researchers to make connections between extinct and living species.
In conclusion, the term for all the fossils that have been found over time is the fossil record. It serves as a crucial source of information for understanding the development of life on our planet, despite its inherent incompleteness due to various factors affecting fossil preservation.
To know more about fossil record, refer here:
https://brainly.com/question/12334063#
#SPJ11
in which of the following situations does the car have a nonzero acceleration?multiple select question.the car is on cruise control traveling around a curve.the car starts from rest and speeds up to the speed limit moving in a straight line.the car is on cruise control traveling in a straight line.the car is parked.the car is traveling at the speed limit and then comes to a complete stop while traveling around a curve.the car is traveling at the speed limit, and then it comes to a complete stop in a straight line.
The car has a nonzero acceleration in the following situations:
The car starts from rest and speeds up to the speed limit moving in a straight line.The car is traveling at the speed limit and then comes to a complete stop while traveling around a curve.The car is traveling at the speed limit, and then it comes to a complete stop in a straight line. Options 1, 2, and 3 are correct.Acceleration is defined as the rate of change of velocity with respect to time. Therefore, any change in the velocity of the car, whether it is an increase, decrease, or change in direction, results in a nonzero acceleration. When the car starts from rest and speeds up or comes to a stop, its velocity changes, resulting in a nonzero acceleration.
Similarly, when the car comes to a complete stop while traveling around a curve or in a straight line, its velocity changes direction, resulting in a nonzero acceleration. However, when the car is on cruise control and traveling at a constant speed in a straight line, its velocity is not changing, and therefore, its acceleration is zero. Options 1, 2, and 3 are correct.
To know more about the Cruise control, here
https://brainly.com/question/13607082
#SPJ4
Neglecting air speed, how fast must you toss a ball straight up in order for it to take 6 seconds to return to its initial level?
The initial velocity with which the ball must be thrown upwards in order for it to take 6 seconds to return to its initial level is 29.4 meters/second.
Assuming negligible air resistance, the time taken by a ball to go up and come down after being thrown vertically upwards is given by:
t = 2*v/g
where:
t = time taken for the ball to go up and come down (in seconds)
v = initial velocity with which the ball is thrown upwards (in meters/second)
g = acceleration due to gravity
In this case, the time taken for the ball to return to its initial level is given as 6 seconds. Therefore, we can write:
6 seconds = 2*v/g
Rearranging the equation, we get:
v = (6 seconds * g)/2 = 29.4 m/s
To know more about resistance refer here
https://brainly.com/question/14327116#
#SPJ11
A baseball is hit straight up at an initial velocity of 30m/s if the ball has a negative acceleration of about 10m/s2 how long does the ball take to reach the too of its path
The ball takes about 3.06 seconds to reach the top of its path.
When a ball is thrown or hit straight up, it will reach its maximum height at the point where its vertical velocity becomes zero.
At this point, the ball's acceleration will be equal to the acceleration due to gravity, which is -9.8 m/s².
Using the equation of motion for an object with constant acceleration, we can find the time it takes for the ball to reach the top of its path:
vf = vi + at
where vf is the final velocity (which is zero when the ball reaches its maximum height), vi is the initial velocity (30 m/s), a is the acceleration (-9.8 m/s²), and t is the time we're looking for.
Rearranging the equation, we get:
t = (vf - vi) / a
Since the final velocity is zero, we have:
t = -vi / a
Substituting the values, we get:
t = -30 m/s / (-9.8 m/s²)
t = 3.06 seconds
To know more about equation of motion refer here
https://brainly.com/question/15080570#
#SPJ11
A light bulb carries a current i. the power dissipated in the light bulb is p. what is the power dissipated if the same light bulb carries a current of 3i
The power dissipated in the light bulb if it carries a current of 3i is 9p.
The power dissipated by a light bulb is given by the equation P = I²R, where I is the current flowing through the bulb and R is its resistance. Since the same light bulb is being used, its resistance remains constant.
When the current flowing through the bulb is increased to 3i, the power dissipated is given by P' = (3i)²R = 9i²R = 9P,
where P is the power dissipated when the current was i.
Therefore, the power dissipated in the light bulb is multiplied by a factor of 9 when the current is increased to 3i.
Assuming the resistance of the light bulb remains constant, we can use Ohm's law to find the new current when the current is tripled. Ohm's law states that the current flowing through a conductor is directly proportional to the voltage applied across it and inversely proportional to its resistance. Therefore, when the current is tripled, the voltage across the bulb will also triple since the resistance remains constant.
To know more about the Light bulb, here
https://brainly.com/question/2288858
#SPJ4
Please describe this graph
a. Explain the relationship between variables.
b. State if it is a linear or nonlinear graph.
c. Give an example of what this graph could be about.
Answers:
a. The relationship between the variables is directly proportional (i.e. the x axis is directly proportional to the y axis).
b. The graph is linear.
c. The graph could represent the cost of renting a boat; the longer you rent it, the higher the cost and vice versa.
a. The relationship between the variables is directly proportional (i.e. the x axis is directly proportional to the y axis).
b. The graph is linear.
c. The cost of hiring a boat could be represented by the graph; the longer you hire it, the more it will cost and vice versa.
what is a graph?A graph is described as a diagram showing the relation between variable quantities, typically of two variables, each measured along one of a pair of axes at right angles.
The purpose of a graph is to present data that are too numerous or complicated to be described adequately in the text and in less space.
Learn more about graphs at: https://brainly.com/question/19040584
#SPJ1
A cart with a mass of 8. 0 kilograms is attached to a spring. When
released from the spring, the cart travels up a hill with a height of 11
meters. The cart comes to rest at the top of the hill. The spring is 100%
efficient. How much elastic potential energy was required to bring the
cart to rest at the top of the hill? Include your units.
Elastic Potential Energy required to bring the cart on the top of the hill= 862.4J
To solve this problem, we need to use the conservation of energy principle. The energy stored in the spring (elastic potential energy) is transformed into kinetic energy as the cart is released, and then into gravitational potential energy as the cart moves up the hill. At the top of the hill, all of the kinetic energy is converted back into potential energy, and the cart comes to rest. Since the spring is 100% efficient, no energy is lost due to friction or other factors.
The equation for elastic potential energy is:
Elastic potential energy = 1/2 * k * x^2
where k is the spring constant and x is the displacement from the equilibrium position. We can assume that the spring is initially compressed by a certain amount, and then released to launch the cart up the hill. The amount of compression is not given in the problem, so we cannot calculate the exact value of k or x. However, we can still solve for the elastic potential energy using the information given.
The equation for gravitational potential energy is:
Gravitational potential energy = m * g * h
where m is the mass of the cart, g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the hill. We can calculate the gravitational potential energy as:
Gravitational potential energy = 8.0 kg * 9.8 m/s^2 * 11 m
= 862.4 J
Since the cart comes to rest at the top of the hill, all of the gravitational potential energy is converted back into elastic potential energy. Therefore:
Elastic potential energy = Gravitational potential energy
= 862.4 J
Note that we did not need to know the values of k or x to solve for the elastic potential energy in this case. However, if we had more information about the spring (such as the spring constant or the amount of compression), we could use the elastic potential energy equation to calculate the energy more precisely.
Visit https://brainly.com/question/29311518 to learn more about Elastic Potential Energy
#SPJ11
The Really Big Dam is 1000 feet wide, holds back a depth of 60 feet of water, and the lake behind the dam extends back one quarter of a mile. The Very Big Dam is also 1000 feet wide, holds back a depth of 50 feet of water, and the lake behind the dam extends back for 2 miles.
If the dams were constructed in the same way, which dam had to be constructed to be strongest? (Assume the water levels do not vary seasonally. )
The strength of two dams is compared by calculating their potential energy based on the height of the water they hold back. The Very Big Dam has greater potential energy than the Really Big Dam, making it stronger.
To determine which dam is stronger, we need to compare their potential energy due to the water they are holding back. The potential energy of the water is given by the formula:
PE = mgh
where PE is the potential energy, m is the mass of the water, g is the acceleration due to gravity, and h is the height of the water.
Since the dams are the same width, we can assume they have the same mass of water. Therefore, the potential energy depends only on the height of the water.
The height of the water in the Really Big Dam is 60 feet, and the lake extends back one-quarter of a mile or 1320 feet. Therefore, the potential energy of the water is:
PE1 = mgh = (mass of water) x g x h
[tex]PE1 = (1000 ft \times 1320 ft \times 60 ft) \times 62.4 \;lb/ft^3 \times 32.2\; ft/s^2[/tex]
The height of the water in the Very Big Dam is 50 feet, and the lake extends back two miles, or 10560 feet. Therefore, the potential energy of the water is:
PE2 = mgh = (mass of water) x g x h
[tex]PE2 = (1000\; ft \times 10560\; ft \times 50 ft) \times 62.4 \;lb/ft^3 \times 32.2\; ft/s^2[/tex]
Calculating the two potential energies, we find that PE2 is greater than PE1. Therefore, the Very Big Dam had to be constructed to be strongest.
In summary, to determine which dam is stronger, we compare its potential energy due to the water they are holding back. Since the dams have the same width, the potential energy depends only on the height of the water.
Calculations show that the potential energy of the water held by the Very Big Dam is greater than the Really Big Dam, making it the stronger of the two dams.
To know more about potential energy refer here:
https://brainly.com/question/30672627#
#SPJ11
1. Fish are hung on a spring scale to determine their mass (most fishermen feel no obligation to truthfully report the mass).
(a) What is the force constant of the spring in such a scale if it the spring stretches 8. 00 cm for a 10. 0 kg load?
(b) What is the mass of a fish that stretches the spring 5. 50 cm?
(c) How far apart are the half-kilogram marks on the scale?
Please include all of your steps
The force constant of the spring in such a scale if the spring stretches 8. 00 cm for a 10. 0 kg load is 1225 N/m. The mass of the fish is 6.88 kg. The half-kilogram marks on the scale are 4 cm apart.
Spring scales are commonly used by fishermen to determine the mass of the fish they catch. The scale works by measuring the force exerted by the fish on a spring, which is directly proportional to the fish's weight. The spring scale can be calibrated to read the mass of the fish based on the spring's force constant.
(a) The force constant of the spring can be calculated using Hooke's law, which states that the force exerted by a spring is directly proportional to its displacement. Therefore, the force constant of the spring is given by k = F/x, where F is the force exerted by the spring and x is the displacement.
For a 10.0 kg load that stretches the spring 8.00 cm, the force exerted by the spring is F = kx [tex]= (10.0 \;kg)(9.8 \;m/s^2)[/tex]= 98 N. Therefore, the force constant of the spring is k = F/x = 98 N/0.080 m = 1225 N/m.
(b) To determine the mass of a fish that stretches the spring 5.50 cm, we can use the force constant of the spring to find the force exerted by the fish. The force exerted by the spring is F = kx = (1225 N/m)(0.055 m) = 67.4 N.
The mass of the fish can then be calculated using the formula F = mg, where g is the acceleration due to gravity. Therefore, the mass of the fish is m = F/g = 6.88 kg.
(c) The distance between the half-kilogram marks on the scale can be found by calculating the displacement of the spring for a 0.5 kg load.
Using the force constant of the spring, we can find the displacement x = F/k = [tex](0.5 \;kg)(9.8 \;m/s^2)/(1225\; N/m)[/tex] = 0.04 m. Therefore, the half-kilogram marks are 4 cm apart.
In summary, the force constant of the spring in a fish scale can be used to determine the mass of a fish based on the displacement of the spring. The force constant can be calculated using Hooke's law, and the mass of the fish can be found using the formula F = mg.
The distance between the half-kilogram marks on the scale can be found by calculating the displacement of the spring for a 0.5 kg load.
To know more about force refer here:
https://brainly.com/question/26115859#
#SPJ11
Your lawn is twice as large as your neighbor’s lawn. You both start cutting your lawn with the same model, self-propelled lawn mower (requiring the same force) beginning at 9:00am on a Saturday morning. You finish cutting your lawn at 11:00 am. What time will your neighbor finish cutting her lawn if you are equally powerful?
Your neighbor will finish cutting her lawn at 10:00 am, which is one hour after both of you started.
Since your lawn is twice as large as your neighbor's lawn, it takes you a certain amount of time to cut it, which we can analyze to determine when your neighbor will finish cutting her lawn.
You started cutting your lawn at 9:00 am and finished at 11:00 am. This means it took you 2 hours to complete the task. Since your neighbor's lawn is half the size of yours, it will take her half the amount of time to finish cutting her lawn, assuming you both exert the same force using the same self-propelled lawn mower.
To calculate the time it will take your neighbor to cut her lawn, simply divide your time (2 hours) by 2. This gives us 1 hour. Your neighbor started cutting her lawn at the same time you did, 9:00 am, and will take 1 hour to complete the task.
For more about lawn:
https://brainly.com/question/14722533
#SPJ11
Rolanda sees an error in her friend’s graphic organizer comparing electrical and gravitational forces. a venn diagram with two intersecting circles. the circle on the left is labeled gravitational force. the circle on the right is labeled electrical force. there is an x in the circle on the left with infinite reach and depends on mass. in the circle on the right is z with depends on charge. there is a y in the intersecting area. which change should rolanda suggest to her friend to correct the error? the note about mass belongs in region z, and the note about charge belongs in region x. the note about mass belongs in region y, and the note about infinite reach belongs in region z. the note about charge belongs in region y. the note about infinite reach belongs in region y.
Rolanda needs to advise her friend to place the note about mass in region z and the note about charge in region x to fix the mistake in the Venn diagram. Therefore, the correct answer is option A.
Rolanda should suggest to her friend that the note about mass belongs in region z, and the note about charge belongs in region x. This correction is necessary because gravitational force depends on mass, while electrical force depends on charge.
The x in the circle on the left with infinite reach and depends on mass is incorrect because gravitational force does not have infinite reach. It only acts between objects with mass that are in close proximity to each other. The y in the intersecting area is also incorrect because there is no force that is common to both gravitational and electrical forces.
On the other hand, the z in the circle on the right with depends on charge is correct because electrical force depends on the charge of the objects involved. By suggesting that the note about mass belongs in region z and the note about charge belongs in region x, the Venn diagram will accurately represent the differences between gravitational and electrical forces.
In summary, Rolanda should suggest to her friend that the note about mass belongs in region z and the note about charge belongs in region x. Therefore, the correct answer is option A.
This will correct the error in the Venn diagram and accurately represent the differences between gravitational and electrical forces. It is important to understand these differences in order to properly understand the behavior of objects in our world.
To know more about Venn Diagram refer here:
https://brainly.com/question/29301560#
#SPJ11
Two polythene balls have the same charge. Each ball has an excess of N = 105 protons. The balls are initially separated by a distance, d = 1. 6 m. The Coulomb constant is k = 8. 988 × 109 N m2/C2.
The electric force between the two polythene balls is 1.505 N.
We are given the following information:
The two polythene balls have the same charge.
Each ball has an excess of N = 105 protons.
The balls are initially separated by a distance, d = 1.6 m.
The Coulomb constant is k = [tex]8.988 *10^9 N m^2/C^2.[/tex]
To find the electric force between the two polythene balls, we can use Coulomb's Law:
electric force = [tex]k * (q1 * q2) / d^2[/tex]
where:
- k is the Coulomb constant
- q1 and q2 are the charges of the two polythene balls
- d is the distance between the two polythene balls
Since the two polythene balls have the same charge, we can substitute N for both q1 and q2.
So the equation becomes:
electric force = [tex]k * (N * N) / d^2\\[/tex]
Substituting the given values, we get:
electric force = [tex]8.988 *10^9 N m^2/C^2 * (105 * 105) / (1.6 m)^2[/tex]
electric force = 1.505 N (rounded to three decimal places)
To know more about Coulomb's Law refer here
https://brainly.com/question/506926#
#SPJ11
which is a form of potential energy
What is the relationship between distance and magnetic force?
As you increase the distance between the magnet and the paper clip, does the magnetic force increase or decrease?
a. As distance increases, magnetic force increases.
b. As distance increases, magnetic force decreases.
c. As distance increases, magnetic force stays the same
Answer:
b. As distance increases, magnetic force decreases.
Explanation:
The correct answer is b. As distance increases, the magnetic force decreases. Magnetic force obeys an inverse square law with distance. This means that the force is inversely proportional to the distance squared. For example, if the distance between two magnets is doubled, the magnetic force between them will fall to a quarter of the initial value.
In ancient times, many people believed that our lives were somehow influenced by the patterns of the stars in the sky. Modern science has not found any evidence to support this belief, but instead has found that we have a connection to the stars on a much deeper level: We are "star stuff. "Do you think these connections have any philosophical implications in terms of how we view our lives and our civilization?
Yes, I do think that the idea that we are "star stuff" has significant philosophical implications. Firstly, it challenges the notion that we are separate from the universe and reinforces the idea that we are interconnected with everything around us.
This can lead to a sense of awe and wonder about the universe and our place in it.
Additionally, the idea that we are made of the same material as stars can inspire a sense of responsibility to take care of the planet and our fellow human beings. We are not just individuals, but part of a larger whole, and our actions can have an impact on the world around us.
From a societal perspective, this understanding can lead to a greater appreciation for science and the pursuit of knowledge. It can also inspire a sense of unity and cooperation among different cultures and nations, as we all share this common connection to the universe.
Overall, recognizing our connection to the stars can have profound implications for how we view ourselves and our place in the world, and can inspire us to live more consciously and responsibly.
To learn more about responsibility, refer below:
https://brainly.com/question/29729388
#SPJ11
- Look at the part of your circuit that connects the battery, switch, and red bulb.
Do you have them wired in series or parallel?
The part of the circuit that connects the battery, switch, and red bulb is a critical component in ensuring that the circuit functions correctly. The battery is the power source that provides the energy needed to light up the red bulb, while the switch is the control mechanism that allows the user to turn the circuit on and off.
When the switch is closed, the circuit is completed, and the battery's energy is directed through the wires and into the red bulb. The bulb then converts this energy into light, illuminating the area around it. However, when the switch is open, the circuit is broken, and no energy flows through it.
It is essential to ensure that the connections in this part of the circuit are secure and correctly placed. Any loose or improper connections can cause the circuit to malfunction or not work at all. Additionally, it is crucial to use the correct voltage and amperage rating for the battery and bulb to ensure that they operate within their specified limits and do not damage the circuit.
Overall, the part of the circuit that connects the battery, switch, and red bulb is a crucial component that enables the circuit to function correctly. By ensuring that the connections are secure and the components are properly rated, users can enjoy a safe and reliable circuit that lights up the area around them.
To know more about battery refer here
https://brainly.com/question/11670669#
#SPJ11
A truck with the mass of 8 ton travels at a velocity of 60km/h and collides with a truck with mass of 5 ton travelling in the same direction at 40kh/h. After the collision the two trucks move together. Calculate the final common velocity if the TWO trucks in m/s after the collision?
The final common velocity of the two trucks after the collision is 14.53 m/s.
To calculate the final common velocity of the two trucks after the collision, we will use the law of conservation of momentum. The given terms are: the mass of the first truck (8 tons), its velocity (60 km/h), the mass of the second truck (5 tons), and its velocity (40 km/h).
First, we need to convert the velocities from km/h to m/s:
60 km/h = (60 * 1000 m) / (3600 s) = 16.67 m/s
40 km/h = (40 * 1000 m) / (3600 s) = 11.11 m/s
Next, we calculate the initial momentum of both trucks:
Initial momentum = (mass of first truck * its velocity) + (mass of second truck * its velocity)
Initial momentum = (8 * 16.67) + (5 * 11.11) = 133.36 + 55.55 = 188.91 kg m/s
Since both trucks move together after the collision, we can find their combined mass (13 tons) and use it to calculate the final common velocity:
Final common velocity = Initial momentum / Combined mass
Final common velocity = 188.91 kg m/s / 13 tons = 14.53 m/s
So, the final common velocity of the two trucks after the collision is 14.53 m/s.
To know more about collision, refer here:
https://brainly.com/question/24616147#
#SPJ11
As the color of light changes from red to yellow, the frequency of the light
An object of mass 20 g is moving in a horizontal circle of radius 250 cm at a speed of 50 cm/s. What is the centripetal acceleration experienced by the object?
The centripetal acceleration experienced by an object moving in a circle is given by the formula:
a = v²/r
where a is the centripetal acceleration, v is the speed of the object, and r is the radius of the circle.
In this problem, we are given that the object has a mass of 20 g, which we need to convert to kilograms:
m = 20 g = 0.02 kg
We are also given that the object is moving in a horizontal circle of radius 250 cm at a speed of 50 cm/s. We need to convert these measurements to SI units (meters and seconds) to use the formula for centripetal acceleration:
r = 250 cm = 2.5 m
v = 50 cm/s = 0.5 m/s
Now we can calculate the centripetal acceleration:
a = v²/r = (0.5 m/s)² / 2.5 m = 0.1 m/s²
Therefore, the centripetal acceleration experienced by the object is 0.1 m/s².
I need to know the answers for 2 and 3
The ride's spring constant is 8625 N/m.
The Nerf gun's spring has a spring constant of 920 N/m.
How to calculate spring constant?To find the spring constant:
F = kx
where F = force applied to the spring, k = spring constant, and x = displacement of the spring.
Find the force applied to the spring, using Newton's second law:
F = ma
where m = combined mass of the Peas and their car, and a = acceleration of the car as it comes to a stop.
Since the car is initially moving at a constant velocity of 1.0 m/s, its initial acceleration is 0 m/s². Therefore, the only acceleration acting on the car is the deceleration caused by the spring.
To find the deceleration, using the equation:
v² = u² + 2as
where v = final velocity (0 m/s), u = initial velocity (1.0 m/s), a = acceleration, and s = displacement (0.20 m).
Rearranging this equation to solve for a:
a = (v² - u²) / (2s) = (0 - 1.0²) / (2 x 0.20) = -2.5 m/s²
Using Newton's second law to find the force applied to the spring:
F = ma = 690 kg × (-2.5 m/s²) = -1725 N
Finally, use the formula F = kx to solve for k:
k = F / x = -1725 N / (-0.20 m) = 8625 N/m
Therefore, the spring constant of the ride is 8625 N/m.
3) To find the spring constant, use the formula:
v = √(kx² / m)
where v = velocity of the dart, k = spring constant, x = displacement of the spring (0.04 m), and m = mass of the dart (0.92 g = 0.00092 kg).
Solving for k:
k = m v² / x² = 0.00092 kg × (16 m/s)² / (0.04 m)² = 920 N/m
Therefore, the spring constant of the spring used in the Nerf gun is 920 N/m.
Find out more on spring constant here: https://brainly.com/question/1968517
#SPJ1
single convex lenses can be used to make images of distant objects. will these images be real or imaginary? will they be inverted or upright? will they be larger or smaller than the original object? where does the image occur relative to the focus? (specify which side of the lens)
Single convex lenses can create real and inverted images of distant objects, with size depending on object distance and focal length. The image appears on the opposite side of the lens from the object, between the lens and its focus.
Single convex lenses can be used to make real and inverted images of distant objects. The size of the image depends on the distance of the object from the lens and the focal length of the lens.
If the object is very far away from the lens, the image will be small. The image will occur on the side of the lens opposite to the object and between the lens and its focus.
The image will be real and inverted because the convex lens converges the light rays that pass through it.
To know more about convex lens , refer here:
https://brainly.com/question/27087947#
#SPJ11
During practice a soccer player kicks a ball and sends it rolling across the grass. Over a short distance the ball slows down and stops which two statements support the idea that energy is conserved in this example? Please Hurry
Energy cannot be created or destroyed, it can only be converted from one form to another. When the soccer player kicked the ball, they transferred their kinetic energy to the ball, causing it to move.
As the ball rolled across the grass, its kinetic energy was gradually converted into other forms of energy, such as frictional heat and sound energy, causing it to slow down and eventually stop.
The total amount of energy in a closed system remains constant. In this case, the system is the ball and the grass.
Even though the ball slowed down and stopped, the total amount of energy in the system remained the same, as the kinetic energy of the ball was converted into other forms of energy, such as heat and sound. Therefore, energy was conserved in this example.
To know more about kinetic energy, refer here:
https://brainly.com/question/26472013#
#SPJ11
A mass attached to the end of a spring is set in motion. The mass is observed to oscillate up and down, completing 24 complete cycles every 6. 00 s. What is the period of the oscillation?
What is the frequency of the oscillation?
A mass attached to the end of a spring is set in motion, the mass is observed to oscillate up and down, completing 24 complete cycles every 6. 00 s, the period of the oscillation: 0.25 seconds.
The mass attached to the end of a spring completes 24 cycles in 6.00 seconds. To determine the period of the oscillation, we need to find the time taken for one complete cycle. The period (T) is calculated by dividing the total time by the number of cycles, which is:
T = total time / number of cycles = 6.00 s / 24 cycles = 0.25 s per cycle.
The period of the oscillation is 0.25 seconds.
Now, to find the frequency of the oscillation, we need to determine the number of cycles that occur in one second. The frequency (f) is the inverse of the period:
f = 1 / T = 1 / 0.25 s = 4 cycles per second (Hz).
The frequency of the oscillation is 4 Hz.
To know more about oscillation, refer here:
https://brainly.com/question/13112321#
#SPJ11
