PLEASE HELP
Identify and describe at least (3) physical science concepts to help with blackout.

If you float a piece of wood in a container half-full of water that rests on a weighing scale, the weight reading on the scale will increase.

Buoyancy is the force through your fluids or total or submerged bodies. Also known as Archimedes' theorem. The fluid of the direction on the body produces a resultant force but with the direction of the weight, with the opposite direction, upwards.

All material submerged in a liquid under the action of buoyancy, for this reason we have that the value on the scale will be increased with a system of a wood floating in water.

See more about Buoyancy at brainly.com/question/19168433

#SPJ12

The force exerted on the tires of a car that directly accelerate it along a road is exerted by the road friction.

Force is defined as the product of mass and acceleration of an object.

Friction is defined as the force that resists the movement of an object over another.

Therefore, the force exerted on the tires of a car that directly accelerate it along a road is exerted by the road friction.

Learn more about force here:

https://brainly.com/question/12970081

#SPJ12

Answer:

copper cooks it faster because it heats up quicker

Copper

Copper is a good heat conductor and food would be cooked faster in it.

Hope this helps!!

>Rijja<

Please mark brainliest! :)

Answer:

[tex]\huge\boxed{\sf Current = 6\ Ampere}[/tex]

Explanation:

In a parallel circuit, Total resistance is:

[tex]\displaystyle \frac{1}{R_T} =\frac{1}{R_1} +\frac{1}{R_2}[/tex]

Where [tex]R_1[/tex] = 6Ω and [tex]R_2[/tex] = 12Ω

[tex]\displaystyle \frac{1}{R_T} =\frac{1}{6} +\frac{1}{12} \\\\\frac{1}{R_T} =\frac{1 \times 2+1}{12} \\\\\frac{1}{R_T} =\frac{3}{12} \\\\\frac{R_T}{1} = \frac{12}{3} \\\\\boxed{R_T=4 \ Ohm}[/tex]

We know that:

V = 24 V, R = 4 Ω (V given, R found)

24 = I(4)

Divide 4 to both sides

6 A = I

Current = 6 Ampere

[tex]\rule[225]{225}{2}[/tex]

Gravitational potential energy has changed from the beginning to the chain just sliding away from the table willl be MgL/24.

The energy that an item has due to its location in a gravitational field is known as gravitational potential energy.

Length of hanging part, L/4

The gravitational potential energy is;

Work = Gravitational potential energy

Work done =force×displacement

[tex]\rm W = \frac{Mg}{3} \times \frac{L}{8} \\\\ W = \frac{MgL}{24}[/tex]

Hence, gravitational potential energy has changed from the beginning to the chain just sliding away from the table willl be MgL/24.

To learn more about the gravitational potential energy, refer;

https://brainly.com/question/3884855

#SPJ1

Answer:

Forces do not have a specific direction.

Answer:the line away from the spacecraft should be straight down (perpendicular to it). Label this M. This is the force of the moon on the spacecraft. A minuscule line upward from the moon towards the spacecraft shows the force of the spacecraft on the moon. Should be directly below the spacecraft and pointed straight up at it.

Explanation:

Answer: See below

Explanation:

a) Using Newton's 2nd Law, rearranging and solving for acceleration

[tex]a &= \frac{F}{m}\\ &= \frac{25\ \text{N}}{0.5\ \text{kg}}\\ &= \boxed{50\ \text{m/s}^2}[/tex]

b) Using the acceleration 50 m/s^2 and the initial velocity v = 0 (since the object starts from rest), the final velocity at t = 20, v can be determined using a suitable equation as follows:

[tex]v &= u+ at\\ &= 0+ 50\ \text{m/s}^2(20\ \text{s})\\ &= \boxed{100\ \text{m/s}}[/tex]

c) To determine the distance s traveled in the 20 seconds, we'll use a suitable equation:

[tex]s &= ut+\frac{1}{2}at^2\\ &= 0+\frac{1}{2}(50 \text{m/s}^2)(20\ \text{s})^2\\ &= \boxed{10\ 000\ \text{m}}[/tex]

The energy input would it take to climb a ladder will be 20000 J.

Mechanical advantage is a measure of the ratio of output force to input force in a system, it is used to obtain the efficiency of the given mechanical machine.

Mechanical advantage is a measure of how much a machine multiplies the input force.

The complete question is;

"if we assume a typical efficiency of 25% for the human body how much energy input would it take to climb a ladder increasing body potential energy by 5000J"

The formula for the efficiency is;

[tex]\rm E = \frac{P}{\eta} \\\\ E = \frac{5000}{0.25} \\\\ E = 20000 \ J[/tex]

Hence, the energy input would it take to climb a ladder will be 20000 J.

To learn more about the mechanical advantage, refer to the link;

https://brainly.com/question/7638820

#SPJ1

Answer:

18 groups are in the modern periodic table

Answer:

There's 18 groups I'm pretty sure

Answer:

The absorption lines will shift to the red (become longer).

This is because of the extra distance that a wavelength λ must travel between the vibrations of the source producing the spectrum.

Note that the Doppler effect of the source is slightly different for light waves than it is for sound waves because sound waves require a medium in which to travel while light waves do not require such a medium (example air).

Answer:

1.708 g/cm^3

Explanation:

Density = mass/volume

           =  84.7 g / 49.6 cm^3 = 1.708  g/cm^3

The peak value of a sine wave whose VAV value is 15V is 21. 21

A peak value is simply known as the highest or maximum value reached in one cycle by an alternating quantity.

The formula for peak value is given as;

peak value = Voltage * √2

Voltage = 15V

Peak value = 15 * √ 2 = 15 * 1. 4142 = 21. 21

Thus, the peak value is 21. 21

Learn more about rms value here:

https://brainly.com/question/9623597

#SPJ1

Nuclear fusion is the process which produces the energy that powers a solar calculator.

This process involves the fusion of hydrogen atoms to form helium with accompanying release of heat energy.

The heat energy is what powers the solar calculator thereby making it the most appropriate choice.

Read more about Nuclear fusion here https://brainly.com/question/982293

#SPJ1

The value of the [tex]\rm \triangle x[/tex] will be 29.14 m. Delta represent the change.

The change of distance with respect to time is defined as speed. Speed is a scalar quantity. It is a time-based component. Its unit is m/sec.

The velocity in the part 1;

V₁ = 8.81

The velocity in the part 2;

V₂ = 9.66 m/sec

The resultant of the two vectors of velocity gives the velocity for the connecting path.

[tex]\rm V = \sqrt{8.81 ^2 + 9.66^2 } \\\\ V= 13.07 \ m/sec[/tex]

The  time period for the train accelerates;

[tex]\rm \triangle x = v \times t \\\\ \triangle x = 13.07 \ m/sec \times 2.23 \ sec \\\\ \triangle x = 29.14 \ m[/tex]

Hence the value of the [tex]\rm \triangle x[/tex] will be 29.14 m.

To learn more about the velocity, refer to the link: https://brainly.com/question/862972.

#SPJ1

Answer:

the answer is 14.77 for ∆x

the answer for ∆y is 1.16

if there were no invention of machines then life would have been more difficult and simple works could be hard to do. Even now we are using our phones, sitting in a AC room interacting to eachother from different places. without the invention of machines simple things like transportation would have been difficult. There would be horses and donkey for the transportation. There would be no electricity,no internet, no transportation, not even c computers or mobile etc. The market for business will be smaller, the knowledge and news about world would be less.

so the problem would have been bigger than we can imagine. But one thing is that nature could survive lot more compared to what we have done till now by destroying nature.

Answer:

- elastic energy of rubber straps → KE of capsule 

- KE → GPE as capsule

Explanation:

Since the slowest instruction in the SCA executes in 12.5 ns, the maximum system clock frequency is 80 MHz

To answer the question, we need to know what frequency is.

Frequency is the number of oscillations per second of a wave.

It is given by f = 1/T where T = period of wave

Now, given that the slowest instruction in the SCA executes in t = 12.5 ns, we need to calculate maximum system clock frequency, f.

So, f = 1/t

= 1/12.5 ns

= 1/(12.5 × 10⁻⁹ s)

= 1/12.5 × 10⁹ Hz

= 0.08 × 10⁹ Hz

= 80 × 10⁻³ × 10⁹ Hz

= 80 × 10⁶ Hz

= 80 MHz

So, the maximum system clock frequency is 80 MHz

Learn more about maximum system clock frequency here:

https://brainly.com/question/14636488

#SPJ11

Answer:

C

Explanation:

compound is a substance made from two or more different elements that have been chemically joined

More stopping force is required when the car has to stop in a shorter distance.

Force is directly proportional to acceleration according to Newton's second law of motion.

This means that acceleration increases when force increases.

Stopping of a moving car is negative acceleration.

Therefore, more stopping force is required when the car has to stop in a shorter distance.

Learn more about force and acceleration at: https://brainly.com/question/14343220

#SPJ1

The moon's orbital plane is different from that of the earth's orbit around the sun due to which lunar and solar eclipses do not occur every month.

When the moon passes in front of Earth and the sun, it creates a solar eclipse and casts a shadow across the globe.

Only during the new moon phase, when the moon travels squarely between the sun and Earth and casts shadows on its surface, can a solar eclipse occur.

Due to the moon's orbit being five degrees off-center from Earth's orbit around the Sun, lunar eclipses do not happen every month and the Moon often passes above or below the shadow.

Lunar eclipses would happen every month if there were no tilt. Eclipses of the sun and the moon happen equally often.

Hence lunar and solar eclipses aren't coming every month.

To learn more about the solar eclipse refer;

https://brainly.com/question/17749647

#SPJ1

The reason why lunar and solar eclipses do not occur every month is because; the plane of orbit of the moon around the earth is not same as that of earth around the sun.

When the Moon passes between Earth and the Sun, there's solar eclipse while when the earth passes between the Sun and the Moon, casting a shadow on the Moon, there's lunar eclipse.

Hence, because the plane of orbit of the moon around the earth is not same as that of earth around the sun, we do not have lunar and solar eclipses every month.

Read more on solar and lunar eclipse;

https://brainly.com/question/14198324

#SPJ11

The electric force on the charges will be equal and opposite in nature and the magnitude will be 8.5536 × 10⁻¹³ Newton.

Formula for electrostatic force is F = ( K q1 q2 )/ r²

where q1 and q2 represent the charges and r represents the distance between them and the value of K is 9 × 10⁹.

In question we have given

value of q1 = 5.4 x 10⁻⁷ C

value of q2 = 1.1 x 10⁻¹⁷ C

distance between the (r) = 0.25 m

Applying the formula

F = ( K x (5.4 x 10-7) x (1.1x10-17) )/ 0.25²

F = ( (9 × 10⁹ ) x (5.4 x 10-7) x (1.1x10-17) )/ 0.25²

F = ( (9 × 5.4 × 1.1) × ( 10⁹ × 10⁻⁷ x 10⁻¹⁷) )/ ( 6.25 × 10⁻² )

F = ( 53.46 × 10⁻¹⁵) / ( 6.25 × 10⁻² )

F = 8.5536 × 10⁻¹³ Newton

Electrostatic force = 8.5536 × 10⁻¹³ Newton

So, The point charges are possessing equal and opposite electrostatic force of magnitude 8.5536 × 10⁻¹³ Newton.

Learn more about Electrostatic Force here:

https://brainly.com/question/23121845

#SPJ10

Answer:

V initial = 29.4 m.s²

Explanation:

( Using the laws of motion)

V final = V initial + Acceleration × time

0 = V initial + ( -9.8)(3)

29.4 = V initial

* I took upward as positive that's why I substituted -9.8 *

* for V final we know that at maximum height the ball is not moving thats why is = 0 *

Answer:

I would agree with the answers 1, 3, 4, 5

Obviously energy will not spontaneously flow from a cooler object to a warmer object

Answer:

A. Thermal energy that is not used to do work is often released to the surroundings.

C. Thermal energy flows from a warmer object to a cooler object.

D. Thermal energy is released as unusable energy by a heat engine, which is never 100 percent efficient.

E. Thermal energy flows when two objects in contact have a temperature difference.

Explanation:

Got it right on edge 23

The disadvantage of using geothermal energy is  "It can cause air and groundwater pollution." The correct option is D.

Geothermal energy is a type of renewable energy that comes from the heat within the Earth's core.

The Earth's core is extremely hot, and this heat energy can be harnessed and used to generate electricity. Geothermal energy is often found in areas where the Earth's crust is thin or where there are active volcanoes and geysers.

There are two main types of geothermal energy: direct use and electricity generation.

Direct use involves using geothermal heat directly for heating buildings, greenhouses, or industrial processes such as drying crops or pasteurizing milk. Electricity generation involves using geothermal heat to generate electricity, typically by pumping water into underground reservoirs to create steam that drives turbines connected to generators.

Geothermal energy is considered a renewable energy source because the heat within the Earth's core is continually replenished by radioactive decay. Additionally, geothermal energy is a relatively clean energy source, producing fewer greenhouse gas emissions than fossil fuels.

Here in the question,

Although geothermal energy has many advantages, such as being renewable and reducing greenhouse gas emissions, one of the main disadvantages is that it can cause air and groundwater pollution.

This is because geothermal power plants often release gases and fluids from underground reservoirs that can contain pollutants such as hydrogen sulfide, ammonia, and boron. Additionally, the drilling process used to extract geothermal energy can also release pollutants into the air and water. However, with proper management and regulation, these negative impacts can be minimized.

Therefore, Option D  is correct i.e It can cause air and groundwater pollution is a disadvantage of using geothermal energy.

To know more about Renewable energy click:

https://brainly.com/question/17373437

#SPJ5

The total amount of charge and energy will be 1.20 C and 7.20 J respectively

A capacitor is a device that can store electrical energy. It is a two-conductor configuration separated by an insulating medium that carries charges of equal size and opposite sign.

An electric insulator or vacuum, such as glass, paper, air, or a semiconductor termed a dielectric, can be used as the non-conductive zone.

Given data;

Voltage,V= 12V

Capicitance,C=100mF = 100 × 10⁻³ F

The total amount of charge is;

Q=CV

Q=100 × 10⁻³ ×  12 V

Q=1.20 C

The energy stored by the capacitor;

[tex]\rm U = \frac{1}{2}CV^2 \\\\ \rm U = \frac{1}{2}\times 100 \times 10^{-3} \times (12 \ V)^2 \\\\ U= 7.20 \ J[/tex]

The energy stored by a capacitor will be 7.20 J.

Hence, the total amount of charge and energy will be 1.20 C and 7.20 J respectively

To learn more about the capacitor, refer to the link: https://brainly.com/question/14048432

#SPJ1

The relative ages of the moon's maria and highlands can be determined through the following:

This is referred to as the early geologic units of the moon which arose from asteroid impact and subsequent volcanic activity.

The ages can be measured using techniques such as radioactive dating and crater density.

Read more about Moon maria here https://brainly.com/question/14392864

#SPJ11

Answer:

Star Formation

Stars are born within the clouds of dust and scattered throughout most galaxies. A familiar example of such as a dust cloud is the Orion Nebula. Turbulence deep within these clouds gives rise to knots with sufficient mass that the gas and dust can begin to collapse under its own gravitational attraction.

hy XD ~

The upthrust experienced by the cube of metal is determined as 7.84 N.

The upthrust experienced by the body is calculated as follows;

Fu = ρVg

where;

S.G = density of the body / density of water

density of the body = S.G x density of water

ρ = 0.8 x 1000 kg/m³

ρ = 800 kg/m³

V = L³

V = (0.1)³

V = 0.001 m³

Upthrust = ρVg

Upthrust = 800 x 0.001 x 9.8

Upthrust = 7.84 N

Learn more about Upthrust here: https://brainly.com/question/23931817

#SPJ1