Please describe this graph

a. Explain the relationship between variables.
b. State if it is a linear or nonlinear graph.
c. Give an example of what this graph could be about.

The refractive index of the glass material is approximately 1.4226.

To calculate the refractive index of the glass material for the fiber optic cable, you can use Snell's Law and the definition of the critical angle. The critical angle (θc) is the angle of incidence at which the angle of refraction is 90°. In this case, the critical angle is 25°.

Snell's Law: n1 * sin(θ1) = n2 * sin(θ2)

For the critical angle, θ1 = 25°, and θ2 = 90°. The refractive index of air (n1) is approximately 1.

Applying Snell's Law: 1 * sin(25°) = n2 * sin(90°)

Solving for the refractive index (n2) of the glass material:
n2 = sin(25°) / sin(90°)

n2 ≈ 0.4226 / 1

n2 ≈ 1.4226

The refractive index of the glass material is approximately 1.4226.

To learn more about index, refer below:

https://brainly.com/question/14297987

#SPJ11

As a result, the motorbike wheel takes roughly 0.513 seconds to attain an angular velocity of 95.0 rad/s.

The first step in solving this problem is to find the moment of inertia of the motorcycle wheel. We can use the formula for the moment of inertia of an annular ring:

I = (1/2)mr^2, where m is the mass of the wheel and r is the average radius of the ring, which is (0.325 m + 0.275 m)/2 = 0.3 m.

Plugging in the values, we get:

I = (1/2)(12.0 kg)(0.3 m)^2 = 0.54 kg m^2

Next, we can use the formula for torque to find the net torque acting on the wheel:

τ = Fr, where F is the force exerted by the drive chain and r is the radius at which the force is applied.

Plugging in the values, we get:

τ = (2,000 N)(0.05 m) = 100 Nm

Finally, we can use the rotational kinematics equation to find the time it takes for the wheel to reach an angular velocity of 95.0 rad/s, starting from rest:

ω = ω0 + αt, where ω0 is the initial angular velocity (which is zero), α is the angular acceleration, and t is the time.

We can rearrange this equation to solve for t:

t = (ω - ω0)/α

The angular acceleration α is related to the net torque τ and the moment of inertia I by the formula:

α = τ/I

Plugging in the values, we get:

α = 100 Nm / 0.54 kg m^2 = 185.2 rad/s^2

Now we can plug in all the values to find t:

t = (95.0 rad/s - 0)/185.2 rad/s^2 = 0.513 s

Therefore, it takes approximately 0.513 seconds for the motorcycle wheel to reach an angular velocity of 95.0 rad/s.

To learn more about : angular velocity

https://brainly.com/question/29342095

#SPJ11

The rationale for Galileo using an inclined plane was that along an inclined plane, only part of gravity acts on the object in its direction of motion. Option 1 is correct.

Galileo's use of an inclined plane was an important contribution to the study of physics, as it allowed for the accurate measurement of the acceleration due to gravity. Prior to this, there was little understanding of the laws governing the motion of objects, and many misconceptions existed.

By carefully measuring the motion of falling objects along an inclined plane, Galileo was able to demonstrate that the acceleration due to gravity was constant, regardless of the weight or shape of the object. This was a major breakthrough in the understanding of physics and laid the foundation for further study in this field. Option 1 is correct.

To know more about the Galileo, here

https://brainly.com/question/9724017

#SPJ4

A reservoir functions like a battery by storing potential energy and releasing it when needed.

A reservoir can function like a battery by storing and releasing energy. In a hydroelectric reservoir, potential energy is stored by collecting water in a high altitude area, which can then be released to generate electricity.

Similar to a battery, the energy stored in a reservoir can be charged and discharged as needed.

The charging process occurs when water is pumped uphill using electricity generated by other sources, and the discharge process occurs when the stored water is released to generate electricity during times of high demand.

Learn more about reservoir here: https://brainly.com/question/30544847

#SPJ1

When the block is replaced by one with twice its mass but the amplitude of its oscillations remains the same, the maximum speed of the block will decrease.

The maximum speed of a block undergoing simple harmonic oscillations depends on the amplitude and mass of the block. According to the equation for simple harmonic motion, the maximum speed (v_max) of an object is given by:

v_max = ω * A

where ω represents the angular frequency and A represents the amplitude of oscillation.

In the case described, the student measures the maximum speed of a block with a certain amplitude, A. Now, if the block is replaced by one with twice its mass (2m) while keeping the amplitude of oscillation (A) the same, we need to consider the effect of mass on the angular frequency.

The angular frequency (ω) of an object undergoing simple harmonic motion is given by:

ω = √(k / m)

where k represents the spring constant and m represents the mass of the block.

Since the spring constant (k) remains constant and the mass (m) doubles, the angular frequency (ω) will decrease.

Now, let's analyze the effect on the maximum speed. As the angular frequency decreases and the amplitude (A) remains the same, the maximum speed (v_max) will also decrease.

To know more about harmonic oscillations refer here

https://brainly.com/question/13152216#

#SPJ11

The statement "The image is always to the right of the lens" is false.

However, the statement "The image can be upright or inverted" is true.

When an object is placed to the left of a converging lens, the image can be formed in different positions depending on the distance of the object from the lens and the focal length of the lens.

If the object is located at a distance greater than twice the focal length of the lens, the image will be real, inverted and located to the right of the lens.

If the object is located between the focal length and twice the focal length of the lens, the image will still be real and inverted but located on the same side of the lens as the object.

If the object is located at a distance less than the focal length of the lens, the image will be virtual, upright and located on the same side of the lens as the object.

To know more about converging lens refer here

https://brainly.com/question/28348284#

#SPJ11

The deceleration of the body is -4 m/s^2.

Deceleration is the rate at which an object slows down, and is defined as the negative acceleration of an object. It represents the change in velocity per unit of time when an object slows down.

We can use the kinematic equations to solve this problem.

First, we can find the acceleration of the body between points P and X using the equation:

v^2 = u^2 + 2as

where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the distance covered. We know that u = 40 m/s, v = 20 m/s, s = 200 m, so we can rearrange the equation to solve for a:

a = (v^2 - u^2) / 2s

a = (20^2 - 40^2) / 2(200)

a = -4 m/s^2 (negative sign indicates deceleration)

So the deceleration of the body between points P and X is -4 m/s^2.

Next, we can find the time taken by the body to travel from point X to M using the equation:

v = u + at

where v is the final velocity (0 m/s since the body comes to rest), u is the initial velocity (20 m/s), a is the deceleration (-4 m/s^2), and t is the time taken. Rearranging the equation, we get:

t = (v - u) / a

t = (0 - 20) / (-4)

t = 5 s

So the time taken by the body to travel from point X to M is 5 seconds.

Finally, we can find the distance covered by the body between points X and M using the equation:

s = ut + 1/2 at^2

where s is the distance covered, u is the initial velocity (20 m/s), a is the deceleration (-4 m/s^2), and t is the time taken (5 s). Plugging in the values, we get:

s = 20(5) + 1/2 (-4)(5)^2

s = 100 - 50

s = 50 m

So the distance covered by the body between points X and M is 50 meters.

Therefore, the deceleration of the body is -4 m/s^2.

To learn more about kinematic equations click:

https://brainly.com/question/24458315

#SPJ1

The frequency of displacement of a mass-spring-damper system under sinusoidal driving force is equal to the driving force frequency and in phase with it at steady state.

In a mass-spring-damper system driven by a sinusoidal force, the system will reach a steady-state where the amplitude of the displacement oscillations will remain constant. The frequency of this displacement will be equal to the frequency of the driving force.

Whether the frequency of displacement will be in phase with the driving force depends on the damping ratio of the system. If the damping ratio is zero (i.e. the system is undamped), the displacement frequency will be in phase with the driving force. However, if the system is damped, the displacement frequency will lag behind the driving force frequency.

This is because damping causes energy to be dissipated from the system, resulting in a reduction in the amplitude of the displacement oscillations. As a result, the displacement frequency will be slightly lower than the driving force frequency, and the displacement will lag behind the driving force. The amount of lag will depend on the damping ratio of the system.

To know more about steady state, here

brainly.com/question/30433261

#SPJ4

--The complete question is, In a mass-spring-damper system, a sinusoidal driving force is applied. At steady-state, what is the frequency of displacement of the system and will this frequency be in phase with the driving force? Provide an explanation for your answer--

Answer:

As the color of light changes from red to yellow, the frequency of the light increases.

Explanation:

Red light has the longest wavelength and the lowest frequency among visible light, while yellow light has a shorter wavelength and a higher frequency.

The relationship between the frequency and the wavelength of light is given by the equation:

c = λν

where c is the speed of light, λ is the wavelength of light, and ν is the frequency of light.

Since the speed of light is constant in a vacuum, if the wavelength of light decreases as the color changes from red to yellow, then the frequency must increase. This means that yellow light has a higher frequency than red light.

In the Northern Hemisphere, winds rotate in a counterclockwise direction around a low-pressure area and in a clockwise direction around a high-pressure area. This phenomenon is known as the Coriolis effect.

The Coriolis effect is a result of the rotation of the Earth. As air moves from areas of high pressure to areas of low pressure, it tends to follow a curved path due to the Earth's rotation. In the Northern Hemisphere, the Coriolis effect deflects moving air to the right. As a result, air circulating around a low-pressure area is deflected to the right, causing a counterclockwise rotation.

Conversely, around a high-pressure area, air is descending and moving outward. The Coriolis effect deflects the moving air to the right in the Northern Hemisphere, causing a clockwise rotation.

It's important to note that this rotation pattern is specific to the Northern Hemisphere. In the Southern Hemisphere, the wind rotation is reversed. Low-pressure areas exhibit a clockwise rotation, and high-pressure areas have a counterclockwise rotation due to the opposite deflection of the Coriolis effect in the Southern Hemisphere.

To know more about Northern Hemisphere refer here

https://brainly.com/question/13661560#

#SPJ11

The equation to calculate torque applied to a propeller is [tex]\Delta\omega = (\tau\Delta t) / I[/tex]. Using this equation, the torque applied to a propeller is found to be 5.3 N-m when the change in angular velocity is 16 rad/s, the time interval is 12 s, and the rotational inertia is 4 kg-m².

The torque applied to the propeller can be determined using the equation:

[tex]\Delta\omega = (\tau\Delta t) / I[/tex]

where [tex]\Delta\omega[/tex] is the change in angular velocity, τ is the torque applied, Δt is the time interval, and I is the rotational inertia.

The change in angular velocity is 8 - (-8) = 16 rad/s. Substituting the given values, we get:

[tex]16 rad/s = (\tau \times 12 s) / 4 kg-m^2[/tex]

Solving for τ, we get:

[tex]\tau = (16 rad/s \times 4 kg-m^2) / 12 s[/tex]

[tex]\tau[/tex] = 5.3 N-m

Therefore, the torque applied to the propeller is 5.3 N-m.

In summary, the torque applied to the boat's propeller can be determined using the formula [tex]\Delta\omega = (\tau\Delta t) / I[/tex], where [tex]\Delta\omega[/tex] is the change in angular velocity, [tex]\tau[/tex] is the torque applied, [tex]\Delta t[/tex] is the time interval, and I is the rotational inertia.

Substituting the given values and solving for [tex]\tau[/tex], we get the torque applied to be 5.3 N-m. Therefore, option B is the correct answer.

To know more about torque refer here:

https://brainly.com/question/28220969#

#SPJ11

Complete Question:

A boat's propeller has a rotational inertia of 4 kg-m2. After a constant torque is applied for 12s, the propeller's angular speed changes from a clockwise 8 rad/s to counter-clock wise 8 rad/s. What was the torque applied to the propeller?

A. 4.3 N-m

B. 5.3 N-m

C. 6.3 N-m

D. 7.3 N-m

This effect is commonly referred to as tidal forces. Tidal forces arise due to the differences in gravitational attraction across the length of an extended object.

In the case of the Earth-Moon system, the gravitational pull of the Moon on the near side of the Earth is greater than the pull on the far side.

This results in the deformation of the Earth's oceans, creating the familiar tidal bulges.

Tidal forces can also lead to tidal locking, where an object's rotation and orbital period become synchronized, as is the case with the Moon, which always shows the same face to the Earth.

Tidal forces are also important in the study of binary star systems, where they can cause significant changes in the orbits of the stars.

To know more about tidal forces, refer here:

https://brainly.com/question/6762160#

#SPJ11

In addition to the acromion process, there is another part of the scapula that articulates with the clavicle. It is called the lateral end of the clavicle. The lateral end of the clavicle forms a joint called the sternoclavicular joint with the medial end of the clavicle. This joint connects the clavicle to the sternum and allows for movement and stability of the shoulder girdle.

The sensing method that reflects pulsed radar waves off features below the surface is called Ground-Penetrating Radar (GPR). GPR is a geophysical technique that uses radar pulses to detect and map subsurface structures, objects, and materials. It works by emitting short pulses of electromagnetic energy into the ground or other materials and measuring the reflected signals. The reflections from subsurface features can provide information about changes in material properties, such as variations in composition, density, and moisture content. GPR is commonly used in various fields, including archaeology, geology, civil engineering, and utility detection.

To know more about acromion refer here

https://brainly.com/question/14131256#

#SPJ11

The electromagnetic wave with the longest wavelength and lowest frequency/energy is radio waves.

The electromagnetic spectrum encompasses a range of waves with varying wavelengths and frequencies. At one end of the spectrum are radio waves, which have the longest wavelengths and lowest frequencies. As we move along the spectrum towards shorter wavelengths and higher frequencies, we encounter other types of waves such as microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays.

Radio waves are commonly used for communication, including radio broadcasting, television signals, wireless networks, and radar. They have wavelengths ranging from several millimeters to hundreds of kilometers. Due to their long wavelengths, radio waves carry less energy compared to waves with shorter wavelengths, such as visible light or X-rays.

It's important to note that even though radio waves have low energy and long wavelengths, they are still part of the electromagnetic spectrum and can be used for various practical applications in communication and technology.

To know more about electromagnetic wave refer here

https://brainly.com/question/3101711#

#SPJ11

A flywheel of mass 3. 0g consist of a flat uniform disc of radius 0. 40m. It pivots about central axis perpendicular to its plane, moment of inertia: 2.4 x 10⁻⁴ kg m².

A) To calculate the moment of inertia of a flat uniform disc, we use the formula: I = (1/2) * M * R², where I is the moment of inertia, M is the mass, and R is the radius.

Given the flywheel's mass (3.0g) and radius (0.40m), first convert the mass to kilograms: 3.0g = 0.003 kg. Then, plug the values into the formula: I = (1/2) * 0.003 kg * (0.40m)².

The moment of inertia of the flywheel is approximately 2.4 x 10⁻⁴ kg m².

B) When a torque of 6.8 Nm acts on the flywheel, it causes angular acceleration, which can be calculated using the formula: τ = I * α, where τ is the torque, I is the moment of inertia, and α is the angular acceleration.

Rearrange the formula to find α: α = τ / I. Plugging in the values, we get: α = 6.8 Nm / (2.4 x 10⁻⁴ kg m²). The angular acceleration of the flywheel is approximately 2.83 x 10⁻⁴ rad/s². This means the flywheel will experience a significant increase in angular velocity due to the applied torque.

To know more about moment of inertia, refer here:

https://brainly.com/question/15246709#

#SPJ11

Approximately 14.58 Kg of water is used to cool the 250 Kg cast iron car engine.

To find the mass of water used to cool a 250 Kg cast iron car engine, we must consider the heat given off by the engine and water as they cool to air temperature.

Given that the engine's initial temperature is 35°C, and the air temperature is 10°C, the heat given off is 4.4 x 10^6 J.

First, we will calculate the heat given off by the engine alone:

Q_engine = m_engine * c_engine * ΔT_engine

where:

Q_engine = heat given off by the engine

m_engine = mass of the engine (250 Kg)

c_engine = specific heat capacity of cast iron (approximately 460 J/Kg°C)

ΔT_engine = change in temperature of the engine (35°C - 10°C = 25°C)

Q_engine = 250 Kg * 460 J/Kg°C * 25°C

Q_engine = 2,875,000 J

Next, we will find the heat given off by the water (Q_water) by subtracting the heat given off by the engine from the total heat given off:

Q_water = Q_total - Q_engine

Q_water = 4.4 x 10^6 J - 2,875,000 J

Q_water = 1,525,000 J

Now, we will find the mass of water (m_water) using the equation:

Q_water = m_water * c_water * ΔT_water
where:

c_water = specific heat capacity of water (4,186 J/Kg°C)

ΔT_water = change in temperature of the water (25°C)

1,525,000 J = m_water * 4,186 J/Kg°C * 25°C

m_water = 1,525,000 J / (4,186 J/Kg°C * 25°C)

m_water ≈ 14.58 Kg

To know more about mass of water refer here

https://brainly.com/question/26789700#

#SPJ11

During the collision of a planetesimal with a protoplanet, the kinetic energy of the planetesimal can be converted into different forms of energy.

Some of the energy may be converted into thermal energy due to the friction caused by the collision, resulting in an increase in temperature of the colliding bodies.

Additionally, some of the kinetic energy may be converted into potential energy, as the colliding bodies may move away from each other due to the collision.

The potential energy can later be converted back into kinetic energy if the bodies start moving towards each other again.

Finally, some of the energy can be radiated away as electromagnetic radiation, such as light or heat, depending on the specifics of the collision.

To know more about planetesimal, refer here:

https://brainly.com/question/10194667#

#SPJ11

The situation described here involves the concepts of running, parking, and velocity. Andrew was running late for his class and had to park his truck next to the golf course. Unfortunately, while he was away, a golf ball hit his truck, leaving a noticeable dent in the hood. The golf ball was falling with a velocity of 8.00 m/s.

Velocity is a measure of the rate of change of position of an object with respect to time. In this case, the golf ball was falling with a velocity of 8.00 m/s. When the golf ball hit Andrew's truck, it transferred some of its momentum to the truck, resulting in the dent in the hood.

Momentum is a property of a moving object and is equal to its mass times its velocity. Since the golf ball had a mass of 0.300 kg and was falling with a velocity of 8.00 m/s, it had a certain amount of momentum. When it hit the truck, it transferred some of its momentum to the truck, resulting in the dent in the hood.

The situation described here highlights the importance of being careful while parking one's vehicle. Andrew had to park his truck in a spot he might not have preferred due to his running late. Had he parked in a safer spot, his truck would not have been hit by the golf ball. This also emphasizes the importance of being aware of one's surroundings and being mindful of potential hazards while parking.

To know more about situation  refer here

https://brainly.com/question/14501632#

#SPJ11

If you stand on a swing instead of sitting on it, the frequency of oscillation will decrease.

The frequency of oscillation of a swing depends on its length and acceleration due to gravity. The longer the swing, the slower it oscillates, and the shorter the swing, the faster it oscillates. The acceleration due to gravity provides the restoring force that pulls the swing back toward its equilibrium position.

When you stand on a swing instead of sitting on it, you effectively shorten the length of the swing. This is because your center of mass is higher up on the swing, which reduces the length of the pendulum from the pivot point to your center of mass. A shorter pendulum has a higher frequency of oscillation than a longer pendulum, so the frequency of oscillation of the swing will increase.

However, when you stand on a swing, you also make it harder for the swing to move. This is because your legs are now acting as shock absorbers, and they absorb some of the energy that would otherwise be used to swing the swing. This makes it harder for the swing to oscillate, which reduces the frequency of oscillation.

The net effect of these two factors is that the frequency of oscillation of the swing decreases when you stand on it instead of sitting on it.

More on oscillation's frequency can be found here: https://brainly.com/question/14316711

#SPJ1

When traveling at 55mph, it takes approximately 211 feet to stop.

To determine how many feet you need to stop when traveling at 55 mph, you'll need to consider the following terms:

1. Speed: In this case, it's 55 mph.

2. Conversion factor: To convert mph to feet per second (fps), you need to multiply by 1.467.

3. Braking distance: The distance required to come to a complete stop from a certain speed, which is affected by factors such as the road conditions and vehicle's braking system.

Now, let's calculate the stopping distance:

Step 1: Convert the speed to feet per second.
55 mph × 1.467 = 80.685 fps

Step 2: Calculate the braking distance using the general rule of thumb (which assumes good road conditions and properly functioning brakes) that it takes 1.5 feet to stop for every 1 fps of speed.

80.685 fps × 1.5 = 121.028 feet

So, when traveling at 55 mph, you would need approximately 121 feet to stop. Please note that this is a rough estimate and can vary depending on factors such as road conditions and the efficiency of the vehicle's braking system.

Learn more about Braking distance: https://brainly.com/question/13666022

#SPJ11

In this scenario, the independent variable is the amount of sleep and the dependent variable is the academic performance in English and math classes.

In this research, a researcher is studying the effect of sleep on academic performance. She thinks that less sleep will lead to lower grades. Therefore, she has some people sleep six hours per night. Some people sleep three hours per night, and some people sleep as much as they want.

She then monitors academic behavior during English math classes among participants.

The independent variable here is the amount of sleep that the participants get each night. It is the variable that is being manipulated or changed by the researcher.

The researcher is interested in studying the effect of different amounts of sleep on academic performance. Therefore, the amount of sleep is the independent variable.

The dependent variable is the academic performance of the participants in English and math classes. It is the variable that is being measured by the researcher. The researcher wants to know how different amounts of sleep affect academic performance.

For more such questions on independent variable, click on:

https://brainly.com/question/28433016

#SPJ11

Newton's formula for the speed of sound (c) is  c = √(K/ρ)

Newton's formula for the speed of sound is an early theoretical prediction of the speed of sound in a medium. The formula includes the following terms:

1. Bulk modulus (K): A measure of a material's resistance to compression.
2. Density (ρ): The mass of a substance per unit volume.

Newton's formula for the speed of sound (c) is given by:

c = √(K/ρ)

This equation suggests that the speed of sound in a medium is dependent on the medium's bulk modulus and density.

The higher the bulk modulus and lower the density, the faster the speed of sound in that medium. However, this formula didn't account for adiabatic processes and was later refined by Laplace.

To learn more about density, refer below:

https://brainly.com/question/29775886

#SPJ11

Answer:

Explanation:

C

In charging by induction, a charged object is brought near an object without touching it. The presence of the charge object induces electron movement and a polarization of the object. Then conducting pathway to ground is established and electron movement occurs between the object and the ground. During the process, the charged object is never touched to the object being charged.

The experiment compares two materials by rubbing them with a positively charged balloon to see which one attracts the balloon more. The material that attracts the balloon more has a higher tendency to accept negative charges.

To determine which material accepts negative charges more easily, a simple experiment can be conducted using a positively charged, helium-filled balloon and a 1 m long string.

First, the balloon is rubbed against each of the mystery materials for the same amount of time to transfer some of the positive charges to the materials. The balloon can be positively charged by rubbing it against a wool sweater or a person's hair.

Next, the string is tied to a tabletop, and the balloon is held by the string close to one of the mystery materials. If the material attracts the balloon, it indicates that the material has a greater ability to accept negative charges and is therefore more attractive to the positively charged balloon.

Similarly, the same experiment can be repeated with the other mystery material. The material that attracts the balloon more strongly indicates that it has a greater tendency to accept negative charges.

This experiment works on the principle of electrostatics, where opposite charges attract each other. The positively charged balloon is attracted to the negatively charged material, and the strength of the attraction is proportional to the ability of the material to accept negative charges.

In summary, the experiment involves rubbing both mystery materials with a positively charged balloon and testing which one is more attractive to the balloon using a string tied to a tabletop. The material that attracts the balloon more strongly indicates that it has a greater tendency to accept negative charges.

To know more about charged refer here:

https://brainly.com/question/30960094#

#SPJ11

The deceleration of the body is -1 m/s^2, the distance between X and M is 200m, and the time taken by the body to move from X to M is 20 seconds.

Kinematic equations are a set of mathematical equations used to describe the motion of an object in terms of its displacement, velocity, and acceleration, given certain initial conditions.

To solve this problem, we can use the following kinematic equations of motion:

v = u + at

s = ut + (1/2)at^2

v^2 = u^2 + 2as

Where:

u = initial velocity

v = final velocity

a = acceleration or deceleration

t = time taken

s = distance covered

i) To find the deceleration of the body:

From the first equation, we have:

v = u + at

20 = 40 + a(20)

a = (20-40)/20 = -1 m/s^2

Therefore, the deceleration of the body is -1 m/s^2.

ii) To find the distance between X and M:

We know that the total distance covered from P to M is:

s = 200m + distance between X and M

When the body is at rest at point M, we can use the third equation:

v^2 = u^2 + 2as

Since the body is brought to rest, the final velocity is zero:

0 = 20^2 + 2(-1)s

s = 200 m

Therefore, the distance between X and M is 200m.

iii) To find the time taken by the body to move from X to M:

From the second equation, we have:

s = ut + (1/2)at^2

Since the initial velocity is 20m/s and the final velocity is zero, we have:

s = (1/2)at^2

200 = (1/2)(-1)t^2

t^2 = 400

t = 20 seconds

So, the time taken by the body to move from X to M is 20 seconds.

Therefore, 200 meters separate X and M, the body is decelerating at -1 m/s^2, and it takes the body 20 seconds to get from X to M.

To learn more about Newton's law of motion click:

brainly.com/question/29775827

#SPJ1

The total kinetic energy of the system before the collisions was equal to the total kinetic energy of the system after the collisions.

It appears that both conservation of momentum and conservation of energy hold across all trials regardless of initial conditions. This can be inferred from the fact that the elastic collisions were perfectly elastic, meaning that there was no loss of kinetic energy during the collisions. As a result, the system's total kinetic energy before the collisions was equal to the system's total kinetic energy after the collisions.

As for the conservation of momentum, this can be confirmed by calculating the momentum of the system before and after each collision and comparing the results. In a perfectly elastic collision, the total momentum of the system is conserved, which means that the momentum before the collision is equal to the momentum after the collision.

There do not appear to be any significant patterns based on the information provided regarding whether higher mass or faster velocities did a better job of showing momentum or kinetic energy conservation. However, it is important to note that in a perfectly elastic collision, both momentum and kinetic energy are conserved regardless of the initial conditions of the system.

To know more about the Momentum, here

https://brainly.com/question/29579131

#SPJ4

A real image is formed when the light rays converge and actually intersect at a point, allowing the image to be projected onto a screen. A real image can be captured or observed by placing a screen or a photographic plate at the location of the image.

A virtual image, on the other hand, is formed when the light rays only appear to diverge from a point behind the optical system. It cannot be projected onto a screen but can be observed by looking through the optical system.

Now, without specific scenarios mentioned, it is not possible to provide a definitive answer. The characteristics of the image depend on the specific optical system, such as the type of lens or mirror being used, the object's position, and the distance between the object and the optical system.

In some scenarios, a lens or mirror might produce a real image if the object is placed at a specific distance from the lens or mirror. In other cases, the same lens or mirror might produce a virtual image if the object is placed at a different distance.

To determine whether a scenario produces a real or virtual image, it is necessary to specify the details of the optical system and the object's position relative to it.

To know more about virtual image refer here

https://brainly.com/question/13197137#

#SPJ11

For its size, the common flea is one of the most accomplished jumpers in the animal world. a 2.30-mm-long, 0.490 mg flea can reach a height of 18.0 cm in a single leap.

a) To calculate the kinetic energy per kilogram of mass of the flea, we can use the formula

KE/kg = KE / m

Where KE is the kinetic energy of the flea and m is its mass in kilograms.

First, we need to convert the mass of the flea from milligrams to kilograms

m = 0.460 mg / 1000 = 0.00046 kg

Next, we can use the equation for gravitational potential energy

PE = m * g * h

Where g is the acceleration due to gravity (9.81 m/s^2) and h is the height the flea jumped (0.15 m).

Therefore, the potential energy of the flea is

PE = 0.00046 kg * 9.81 m/s^2 * 0.15 m = 0.00068 J

The kinetic energy of the flea just before takeoff would be equal to its potential energy, assuming that all of its energy was converted from potential energy to kinetic energy during the jump. Therefore:

KE = 0.00068 J

Finally, we can calculate the kinetic energy per kilogram of mass

KE/kg = KE / m = 0.00068 J / 0.00046 kg = 1.48 J/kg.

b) To find out how high the 79.0 kg, 2.00-m-tall human could jump if they could jump to the same height compared with their length as the flea jumps compared with its length, we can use the equation

Height = body length x 60

Where body length is the length of the body from the feet to the top of the head.

Assuming an average body proportion, we can estimate the body length of the human to be about 1.7 meters.

Therefore, the height the human could jump would be

height = 1.7 m x 60 = 102 m.

However, it is important to note that this calculation is purely theoretical and does not take into account the many physiological and biomechanical limitations that would make such a jump impossible for a human.

The given question is incomplete and the complete question is '' For its size, the common flea is one of the most accomplished jumpers in the animal world. A 2.50-mm-long, 0.460 mg flea can reach a height of 15.0 cm in a single leap. a) Calculate the kinetic energy per kilogram of mass. b) If a 79.0 kg, 2.00-m-tall human could jump to the same height compared with his length as the flea jumps compared with its length, how high could the human jump''.

To know more about common flea here

https://brainly.com/question/15393026

#SPJ4

The reason why problems involving mechanical energy fail to meet this rule with an exact answer is because mechanical energy is not a conserved quantity in real-world situations.

The law of conservation of mechanical energy states that the total mechanical energy of a closed system, which includes both potential energy(PE) and kinetic energy(KE), remains constant as long as no external forces act on the system.

In an ideal situation, where there is no friction or other external forces acting on the system, the total mechanical energy would remain constant. However, in most real-world situations, there are always external forces present, such as air resistance or friction, that cause some of the mechanical energy to be lost or converted into other forms of energy such as heat or sound. Therefore, it is impossible to have an exact answer when dealing with mechanical energy problems in real-world situations.

To know more about mechanical energy, click here;

https://brainly.com/question/29408366

#SPJ11

Assuming that the meterstick is in equilibrium, the sum of the forces acting on it must be zero. At the top of the meterstick, the tension in the string is pulling upward with a force of T, while the weight of the meterstick is pulling downward with a force of mg, where m is the mass of the meterstick and g is the acceleration due to gravity.

Since the meterstick is vertical, the weight is acting straight down and the tension is acting at an angle of 90 degrees. Therefore, we can use the following equation to find the tension:

T = mg/cosθ

where θ is the angle between the string and the meterstick (which is 90 degrees in this case). Plugging in the values given:

T = (0.5 kg)(9.8 m/s^2)/cos(90°) = 0 N

Therefore, the tension in the string when the meterstick is vertical is 0 N.

To know more about meterstick refer here

https://brainly.com/question/29690562#

#SPJ11