Lithium arsenate (Li3AsO4) and iron nitrate (Fe(NO3)3) are dissolved in water. What precipitate would you expect to form? what is the name and formula?

Answer:

The correct answer is the last option

Explanation:

Answer:

genetics i.e the law of heredity

Answer:Mendel proposed three laws: Law of Dominance. The Law of Segregation. Law of independent assortment.

Explanation:Gregor Johann Mendel was a scientist who is recognized as the Father and Founder of genetics. Mendel conducted many experiments on the pea plant (Pisum sativum) between 1856 and 1863. He studied the results of the experiments and deducted many observations. Thus, laws of inheritance or Mendel’s laws of inheritance came into existence. Before learning about Mendel’s laws of inheritance, it is important to understand what the experiments performed by Mendel were.

Answer:

666.22grams

Explanation:

The balanced chemical equation of this reaction is given as follows:

2Na + Cl2 → 2NaCl

Based on the above equation, 1 mole of Chlorine gas (Cl2) is needed to produce 2 moles of sodium chloride (NaCl).

Therefore, 5.7moles of Cl2 will react to produce (5.7 × 2) = 11.4moles of NaCl.

Note that, the mass of NaCl was asked in this question. We find the mass of NaCl from the mole by using the formula;

moles = mass/molar mass

Molar mass of NaCl = 58.44 g/mol

11.4 = mass/58.44

mass = 58.44 × 11.4

mass = 666.22grams.

Answer:

Its when like two pure substances are like combined into one.

Explanation:

Answer:

The answer is the 3rd line.

Explanation:

That's the atomic number

Answer: b) Nitrogen trihydride should be the answer.

Explanation:

Nitrogen trihydride is the substance whose Lewis structure shows triple covalent bonds. Hence option is correct.

Covalent bonds are defined as the shared electron pair between two atoms that creates an interatomic bond. At room temperature, covalent compounds can be found in all three of their physical states and often have low boiling and melting temperatures. Covalent substances don't carry electricity.

Lewis structure are defined as a structural depiction of a molecule using lines or pairs of dots to represent covalent bonds between atoms and dots to show the locations of electrons surrounding the atoms. The goal of creating a Lewis dot structure is to locate lone electron pairs in molecules in order to better understand how chemical bonds are formed. In chemistry, a triple bond is a covalent connection where two atoms share three pairs of electrons, such as in the nitrogen molecule (N2) or the acetylene molecule (C2H2).

Thus, Nitrogen trihydride is the substance whose Lewis structure shows triple covalent bonds. Hence option is correct.

To learn more about Lewis structure, refer to the link below:

https://brainly.com/question/20300458

#SPJ6

A solute is a substance that is dissolved in another substance (option A).

A solute is any substance that is dissolved in a liquid solvent to create a solution.

This means that a solute + solvent = solution. For example; sugar (solute) is dissolved in water (solvent) to form a sugary solution.

Therefore, a solute is a substance that is dissolved in another substance.

Learn more about solute at: https://brainly.com/question/7932885

#SPJ1

A solute is any substance that is dissolved in another substance (Option A).

A solute is any type of substance whose molecules are able to form chemical bonds with molecules of solvent in a solution.

Solutes include, for example, hydrophilic substances that dissolve into water such as glucose, cellulose, aminoacids , etc.

In conclusion, a solute is a substance dissolved into another (Option A).

Learn more about solutes here:

https://brainly.com/question/25326161

#SPJ1

Answer:

Voltage.

Explanation:

Voltage is the force or pressure of electricity and is compared to the amount of water pressure in a hose.

Answer:

Voltage is the force or pressure of electricity and is compared to the amount of water pressure in a hose.

Answer:

Explanation:

To find the number of moles in a substance given it's number of entities we use the formula

[tex]n = \frac{N}{L} \\[/tex]

where n is the number of moles

N is the number of entities

L is the Avogadro's constant which is

6.02 × 10²³ entities

From the question we have

[tex]n = \frac{7.72 \times {10}^{24} }{6.02 \times {10}^{23} } \\ = 12.8 239[/tex]

We have the final answer as

Hope this helps you

The answer is refining which is c

Answer:

Doubled.

Explanation:

The relationship between the temperature and the volume of a gas at a constant pressure can be described using Charles' law:

That means that the temperature and the volume of a gas are directly proportional: The higher the temperature, the higher the pressure. If one of those factors is increased twofold, the other one will be increased twofold as well.

Answer:

Explanation:

conductors

Answer:

V1/T1=V2/T2

4.20L/321.2K=x/288.4K

multiply both side by 288.4

1211.28/321.2=x

x=3.77L

Option 3 13.15 is the  correct answer.

Charles's law exists as an experimental gas law that explains how gases tend to expand when heated. A modern statement of Charles's law exists: When the pressure on a sample of a dry gas exists held constant, the Kelvin temperature and the volume will be in direct proportion.

According to Charles law

The volume occupied by a fixed amount of gas is directly proportional to its absolute temperature, if the pressure remains constant.

[tex]V1/T1=V2/T2[/tex]

Where,

[tex]V1[/tex]= first volume

[tex]V{2}[/tex] = second volume

[tex]T{1}[/tex] = first temperature

[tex]T{2}[/tex]= second temperature

Here, at constant pressure,

[tex]V1/T1=V2/T2[/tex]

[tex]V1[/tex]=4.20 L

[tex]V2[/tex]= x

[tex]T1[/tex]=321.2 K

[tex]T2[/tex]=288.4 K

Therefore, [tex]V1/T1=V2/T2[/tex]

4.20L/321.2K=x/288.4K

1211.28/321.2=x

x=3.77L

Thus option a is correct.

To learn more about Charles law refer to:

https://brainly.com/question/16927784

#SPJ2

Answer:

no sure

Explanation:

Answer:

the answer is d

Explanation:

hopes this helps

Answer:

b

Explanation:

Answer:

A single bond, but it's also a hydrogen bond.

Explanation:

A hydrogen bond forms when hydrogen bonds to the 3 most electronegative atoms: Oxygen, Nitrogen, or Fluorine.

It's a single bond because hydrogen only has two valence electrons. Therefore, the rest of the electrons are placed around the nitrogen atom.

Answer:

The following is a rather lengthy discussion on chemical stoichiometry, but it will lead you through the mole concept and its application to chemical reaction stoichiometry. The problems are different than the one posted, but if you can follow this, then you can work your problem of interest.

Explanation:

Stoichiometry is very easy to master if you understand the ‘mole concept’ and how it is used to define and describe chemical process mathematically. A ‘mole’ – in chemistry – is the mass of substance containing one Avogadro’s Number of particles. That is, N₀ = 6.023 x 10²³ particles / mole. When working with chemical reactions and equations data should be first converted to moles using the following conversions.  

1 mole = 1 formula weight = 6.023 x 10²³ particles = 22.4 liters at STP(0⁰, 1atm).

In this problem you are given the equation 2Na + 2H₂O => 2NaOH + H₂. ‘Reading the equation’ there are 2 moles of Na, 2 moles of water, 2 moles of NaOH and 1 mole of H₂. In another example 3H₂ + N₂ => 2NH₃ there are 3 moles of H₂, 1 mole of N₂ and 2 moles of NH₃. The mole values can be multiples or fractions but if one mole value increases all the remaining mole values increase or decrease proportionally. For example:

Using the equation 2Na + 2H₂O => 2NaOH + H₂, one could multiply the equation by 2 giving 4Na + 4H₂O => 4NaOH + 2H₂. The equation shows balance but is not in standard form. If one multiplies the equation by ½ gives Na + H₂ => NaOH + ½H₂. Again, the equation shows balance but is not in standard form.

Standard form of equation also implies the equation conditions are at 0⁰C & 1atm pressure and 1 mole of any gas phase substance occupies 22.4 Liters volume. Such is the significance of converting given data to moles as all other substance mass (in moles) are proportional.  

1st problem, 1.76 x 10²⁴ formula units of Na will react with water (usually read as an excess) to produce (?) grams of H₂.

1st write the equation followed by listing the givens below the respective formulas… That is…

                         Na                      +            H₂O       =>    NaOH    +    H₂,

Given:      1.76 x 10²⁴ atoms                excess             ---------          ? grams

               = 1.76 x 10²⁴atoms/6.023 x 10²³atoms/mole

               = 2.922moles                                        produces  =>    2.922moles H₂ (b/c coefficients of Na & H₂ are same)

                                                      Convert moles to grams =>    2.922moles H₂  x  2.000 grams H₂/mole H₂

                                                                                                              = 5.8443 grams H₂

2nd problem, 3.5 moles Na will react with H₂O (in excess) to produce (?) moles of NaOH.

Again, write equation and assign values to each formula unit in the equation.

                         Na                      +            H₂O        =>           NaOH    +    H₂,

Given:            3.5moles                       excess                      ? grams       ----

Since coefficients of balanced std equation are equal …

                      3.5 moles Na                          produces =>     3.5 moles NaOH

                                             Convert moles to grams =>     3.5 moles NaOH x 40 g Na/mole Na

                                                                                                  = 140 grams NaOH

3rd problem, 2.75 x 10²⁵ molecules H₂O will react with (?) atoms of Na.

Same procedure, convert to moles, solve problem by ratios then convert to needed dimension at end of problem.

                         Na          +            H₂O                                   =>           NaOH           +    H₂

Given:           excess            2.75 x 10²⁵ molecules H₂O    =>      ? atoms NaOH       ----

Convert to moles =>          2.75 x 10²⁵ molecules H₂O / 6.023 x 10²³ molecules H₂O/mole H₂O  

                                             = 45.658 moles H₂O              =>  45.658 moles NaOH  (coefficients are equal)

Convert moles NaOH to grams NaOH                            =>   45.658 moles NaOH x  40 grams NaOH/mole NaOH

                                                                                                     = 1826.33 grams NaOH  

Master the mole concept and you master a lot of chemistry! Good luck.

Answer:

they are both equal

Explanation:

if you don't know don't guess troll the teacher you will get it wrong anyway

Answer: The correct option is D (Powders have more surface area and will dissolve faster).

Explanation:

For a scientist to investigate whether a powered pill will dissolve faster than a solid pill is putting the rate of the reaction under study.

Rate has to do with what is achieved per unit time. One of the factors affecting rates of chemical reaction includes the SURFACE AREA.

Reagents in solution tend to react faster than reagents in solid form. This is because molecules are freer to move about and collide more effectively in solutions. For solids, the more the surface area exposed for reaction the faster the reaction. For example, a lump of Zinc will not react as fast as powdered zinc with dilute hydrochloric acid to produce hydrogen.

Therefore, with the above explanation and example concerning surface area in a chemical reaction, the hypothesis the scientist should develop is that powers which has more surface area will dissolve faster than the soils pills.

Answer:

The correct option is D (Powders have more surface area and will dissolve faster).

Explanation:

Answer:

1.14 M

Explanation:

First divide the mass of NaOH by the molar mass of NaOH. Then divide by the volume to get molarity.

34.2 g / 39.997 g/mol = 0.855 mol NaOH

0.855 mol NaOH / 0.750 L = 1.14 M NaOH

Answer:

ionic substances because they contain charged particles

Answer:

solid goes on the first on and liquid goes on the sceond one

Answer:

B. Wind

Explanation:

Kinetic energy is moving

Answer:

Explanation:

Even if you have a Hotmail email address, you now use the Outlook.com interface to ... I searched and found a Hotmail support number, but is it legit? ... one from Leo's e-mail, I receive a message from windows stating it can't find the site.

Answer:

Chlorine (Cl)

Answer:

The correct answer is - Frequency is the number of wavelengths, which is measured in hertz.

Explanation:

Frequency is the number of waves that go through a fixed point at a particular time. Hertz is the SI unit for frequency which means that one hertz is equal to a unit number of waver passes in a unit time to a fixed point.

As the frequency of a wave increases which means the number of waves increases in the unit time, the shorter the wavelength will be.

a higher frequency wave has more energy than a lower frequency wave with the same amplitude.

Answer:

About 60 grams.  

Explanation:

The on point answer is 61.28 grams.