In which situation is static electricity most likely to form?

Elizabeth switches on a light.
Jack holds a plastic comb close to a stream of water.
Marie drives a car.
Cooper bakes a cake. plssssssssssss answer not in a meen way but corrrect answer only plsssssssssssss answer correct i will drop a thx and rate yo stars ans give you brainlyest

Answers

Answer 1

Answer:

I'd go for 'Marie drives a car'

Explanation:

Static electricity will possible form in all the scenarios, but is more likely to form when you're driving a car. This is due to the friction between the body of the car and the particles in the air around the body of the car. This is why chains are sometimes attached to fuel tankers when transporting them. The chain is made to touch the ground so that any charge built up can be safely conducted to the earth, reducing the chances of a fire outbreak due to charges igniting the fuel.

Answer 2

Answer:

i think its a, sorry if im wrong

Explanation:


Related Questions

What does efficient mean in your own words in science

Answers

Answer:

Efficient means something that gives 100% accuracy.

1. An astronaut is getting ready to explore. If his mass is 60 kg, what is his weight
on Earth?

Answers

Answer:

The mass of an object is the same on Earth, in orbit, or on the surface of the Moon. ... 1N=1kg ⋅m/s2. 1 N = 1 kg · m/s 2 . ... The gravitational force on a mass is its weight. ...

Explanation:

ILY:)
Weight= mg
Weight= (60 kg) (9.8 m/s2)
Weight= 588

TOINETS
Assuming that distances are
equal, which of the following
objects would have the MOST
gravitational force with you?
A. Jupiter
NETTUNE
B. Earth
UNIVERSE
C. Sun

Answers

Answer:

The sun.

Explanation:

The sun has the most gravitational pull.

The sun hope this helps

3. A backpack weighs 8.2 N and has a mass of 5 kg on the moon. What is t
strength of gravity on the moon?
8.2 N

Answers

Weight is equivalent to the product of the mass of an object and the strength of the gravitational field.

Using:
F = ma

a = 8.2 / 5
a = 1.64 N/kg

The gravitational field strength is equivalent to 1.64 N/kg.

A water park rider (mass = 20.0 kg) starts from rest at the top of a 48.0-m tall
water slide (A). The height at B is 16.0 m. Assuming mechanical energy
conservation, determine the potential energy (PE) and kinetic energy (KE) values
at locations A, B and C. Use g = 10.0 N/kg.

Answers

This question involves the concept of the law of conservation of energy.

The potential energy at A,B,C is "9.6 J","3.2 KJ","0 KJ", respectively.

The kinetic energy at A,B,C is "0 KJ","6.4 KJ","9.6 KJ", respectively.

What is the law of conservation of energy?

The law of conservation of energy states that total energy of the system at any instant must remain constant.

At point A

At point A, the rider is at rest at a height of 48 m on top of the slide. So the kinetic energy of the rider must be 0 KJ. And the potential energy will be given as follows:

[tex]P.E=mgh[/tex]

where,

P.E = potential energy = ?m = mass = 20 kgg = 10 m/s²h = height = 48 m

Therefore,

[tex]P.E = (20\ kg)(10\ m/s^2)(48\ m)\\[/tex]

P.E = 9600 J = 9.6 KJ

At point B

The potential energy at point B will be:

[tex]P.E=mgh[/tex]

where,

P.E = potential energy = ?m = mass = 20 kgg = 10 m/s²h = height = 16 m

Therefore,

[tex]P.E = (20\ kg)(10\ m/s^2)(16\ m)\\[/tex]

P.E = 3200 J = 3.2 KJ

According to the law of conservation of energy the rest of the total energy shall be converted to kinetic energy:

K.E = 9.6 KJ - 3.2 KJ

K.E = 6.4 KJ

At point C

At the lowest point C of the ride, the potential energy will become 0 KJ, and the whole energy shall be converted to kinetic energy, that is 9.6 KJ.

Learn more about the law of conservation of energy here:

https://brainly.com/question/12050604

#SPJ1

5j-Tj=6j+3 Tj
Determine the value of T from the given vector

Answers

-1/4

Solve for j and Tj than you have
-j=4Tj
4T=-j/j
4T=-1
T=-1/4

A baseball is traveling (+30m/s) and is hit by a bat. It leaves the bat traveling (−40m/s). What is the change in its velocity?
Unlike some others, this is any choice, so not just 4 choices!

Answers

Answer:

Explanation:

The change must be 30 - - 40 which means it came in a 30 meters / second and went out in the opposite direction at 40 meters / second

The change is 70 m/sec.

You could show it to be - 70 meters per second as well. That's done by making the outgoing direction minus.

Delta v = vf - vi.

Now it depends on which way you define vf and vi.

Radio waves have a longer wavelength than microwaves. What else is true
about radio waves?

Answers


As it was explained in the Introductory Article on the Electromagnetic Spectrum, electromagnetic radiation can be described as a stream of photons, each traveling in a wave-like pattern, carrying energy and moving at the speed of light. In that section, it was pointed out that the only difference between radio waves, visible light and gamma rays is the energy of the photons. Radio waves have photons with the lowest energies. Microwaves have a little more energy than radio waves. Infrared has still more, followed by visible, ultraviolet, X-rays and gamma rays.

That should be able to help answer your question :)

why efficiency of electrons causes negative charge​

Answers

Answer:

Since opposite charges attract each other, the negatively charged electrons are attracted to the positively charged protons. ... Together, all of the electrons of an atom create a negative chargethat balances the positive charge of the protons in the atomic nucleus.

Explanation:

The wavelength of radio waves sent out by an AM station is 600 meters (v = 3.0 x 10^8 m/s). At what frequency is the radio station broadcasting?

Answers

Answer:

500,000 hertz

Explanation:

Wavelength= 600 meters

Velocity(b) = 3 × 10^8

Frequency=?

Therefore the frequency can be calculated as follows

Velocity= frequency × wavelength

Frequency= 3 × 10^8/600

= 500,000 hertz

Hence the frequency is 500,000 hertz

The square plates of a 3000-pF parallel-plate capacitor measure 40 mm by 40 mm and are separated by a dielectric that is 0.29 mm thick and completely fills the region between the plates. What is the dielectric constant of the dielectric?

Answers

Answer:

The square plates of a 3000-pF parallel-plate capacitor measure 40 mm by 40 mm and are separated by a dielectric that is 0.29 mm thick and completely fills teh region between the plates.

Explanation:

3.
A stone is thrown vertically upward at a velocity of 10 m-s-' from the top of a tower
of height 50 m. After some time the stone passes the edge of the tower and strikes
the ground below the tower. Ignore the effects of friction.
3.1 Calculate the time taken by the stone to reach its maximum height above the
ground
3.2 Calculate the maximum height the stone reaches above the tower.
3.3 Sketch the position time graph for the motion of the stone.
3.4 On its way down, the stone takes 0,1 s to pass a window of height 1,5 m, as shown
in the diagram above. Calculate the distance y, from the top of the window to the
ground

Answers

Answer:

1 one is answer when we throw

Explanation:

Becouse we got the 50 m

Which is NOT true of electricity?

It allows us to see with candles and kerosene lamps.
Humans did not invent electricity.
It’s a form of energy.
Lightning and thunder are examples of electricity.

plsssssssssss answer correct plss i want correct answers only not in a meen way

Answers

Answer:

option A is correct answer of this question

Explanation:

=> it allows us to see with candles and kerosene lamps

hope it helps

Assume that a person bouncing a ball represents a closed system. Which
statement best describes how the amounts of the ball's potential and kinetic
energy change?
O A. The ball's kinetic energy increases as it falls and its potential
energy decreases.
B. The ball's potential energy decreases as it rises and its kinetic
energy increases.
C. Both the kinetic and potential energy of the ball decrease.
D. Both the kinetic and potential energy of the ball increase

Answers

Answer:

I know that it is A

Explanation:

How much heat does it lose to change 126 g of water from 67°C to 37°C?​

Answers

Explanation:

convert gram into kg q means amount of heat lost

A fisherman notices that his boat is moving up and down periodically without any horizontal motion, owing to waves on the surface of the water. It takes a time of 2.10 s for the boat to travel from its highest point to its lowest, a total distance of 0.700 m. The fisherman sees that the wave crests are spaced a horizontal distance of 6.10 m apart. A. How fast are the waves traveling?B. What is the amplitude of each wave? C. If the total vertical distance traveled by the boat were 0.500 , but the other data remained the same, how fast are the waves traveling? D. If the total vertical distance traveled by the boat were 0.500 , but the other data remained the same, what is the amplitude of each wave?

Answers

Answer:

a)  v = 2.9 m / s, b) A = 0.350 m, c)    v = 2.9 m / s, d)   A = 1.00 m

Explanation:

The oscillatory motion is described by the expression

          x = A cos (wt + Ф)

the wavelength which is the distance for the wave to repeat and the frequency which is the number of times a wave oscillates per unit of time

a) In this part they ask us for the speed of the wave.

Let's use the relationship between speed, wavelength and frequency

          v = λ f

For the wavelength they indicate that the distance between two crest is 6.1 m

        λ / 2 = 6.10

        λ = 12.20 m

They give us the period of the wave is the time it takes to return to the same point, in this case they give half a period

       A / 2 = 2.10

       A = 4.20 me

        f = 1 / t

        f = ¼, 2

        f = 0.238 Hz

let's calculate

         v = 12.20 0.238

         v = 2.9 m / s

b) the amplitude of the wave, is the distance from zero to some maximum

                 2A = 0.700

                   A = 0.350 m

c) the speed of the wave is not function of the amplitude, so the speed is the same

           v = 2.9 m / s

d) the amplitude is

           2A = 0.50

             A = 1.00 m

When a baseball hits a
baseball glove, what is the
reaction force?

A. The ball pushes onto the glove.
B. The glove pushes against the ball.
C. The ball falls to the ground.
at for every
reaction.
all at the
his glove.

Answers

The reaction force is the glove pushing against the ball because the reaction force would be the ball pushing onto the glove.

Hope that helps :)

How much work is done by 15 kW engine during 3.5 min? Explain the answer if you can plz

Answers

Answer:

W = 3.15 · 10⁶ J  

Explanation:

We know that power is calculated using the formula:

P = W/twhere P = power (W), W = work (J), and t = time (s)  

We can derive a formula for work using this formula by multiplying t to both sides of the equation.

W = Pt

Let's convert 15 kW to W.

15 kW → 15,000 W

Let's convert 3.5 min to s.

3.5 min → 210 s

Substitute these values into the formula for work and solve for W.

W = Pt W = (15,000 W) · (210 s) W = 3,150,000 J  W = 3.15 · 10⁶ J  

This is the amount of work done by a 15 kW engine in 3.5 minutes.

How do sociologists view the categories of race, class, and gender?

Multiple Choice

1. inherent and inevitable
2. socially constructed
3. unchangeable and perpetual
4. natural and biologically determined​

Answers

Answer:

2. Socially constructed

Explanation:

which answer is correct.​

Answers

Answer:

I would say B but I could be wrong

Explanation:

I believe it is b as well

What aquatic species is the least susceptible to acid rain? (Refer to the chart in the lesson to answer this question.)

a bass
b Baetis mayflies
c Bullfrogs
d Rainbow Trout

Answers

Answer:

c. Bullfrogs

Explanation:

I did this lesson and got it right! :)

A unit used to measure force is a
a. newton.
b. newton-meter.
c. joule.
d. watt.

Answers

Answer:

Newton

Explanation:

Newton's are the standard unit of force.


[tex]2(2 \times 5) [/tex]

Answers

20, as you do the brackets first:
2x5=10
10x2=20

Answer:

20

Explanation:

→ First perform calculation within brackets

2 × 5 = 10

→ Resubstitute back

2 × 10

→ Solve

20

A 34kg crate resting on a horizontal surface is pushed as shown. If the coefficient of static friction s between the surfaces is 0.25, what is the minimum force (Fs) required to start the motion?

1


a.
1332.80N

b.
83.30N

c.
8.50N

d.
136.00N
Heeelppp plzz​

Answers

Answer:

D (not so sure, look in the explanation and judge yourself)

Explanation:

Assume that the acceleration due to gravity is 9.81 m/s^2 downwards

Minimum force required = 0.25 x 34 x 9.81

= 83.385 N

So technically the force need to be greater than 83.385 so the answer should be d, not really sure if it should be b though really depends on the acceleration due to gravity.

What is the expermintal example of Zeeman effect?

Answers

Answer:

When the spectral lines are absorption lines, the effect is called inverse Zeeman effect.

Which examples are ways that models can help scientists solve problems? Check all that apply.

Answers

Answer:

These are the 4  correct answers that should be on your test.

A. A model can represent something very large like the solar system.

B. A model can represent something very small like a single cell.

C. A model can represent something very complex like the flow of energy in an ecosystem.

D. A model can represent something that cannot be seen or touched.

Explanation:

Two football players collide head-on in midair while chasing a pass. The first player has a 110 kg mass and an initial velocity of 4.40 m/s in the positive x direction, while the second player has a 135 kg mass and initial velocity of 3.30 m/s in the negative x direction.

Required:
What is the x component of their velocity just after impact if they cling together?

Answers

Answer:

v = 0.16 m/s in the positive x direction.

Explanation:

Assuming no external forces acting during the collision, total momentum must be conserved.Initial momentum can be expressed as follows:

       [tex]p_{o} =m_{1} * v_{o1} + m_{2} * v_{o2} (1)[/tex]

Since both players move only horizontally, (1) can be expressed in terms of the velocities in the x- directions only, taking into account that player 1 moves in the positive x-direction, and player 2 in the opposite direction, and assuming that positive velocities are in the positive x-direction also:

       [tex]p_{o} =110 kg * 4.4 m/s + 135 kg * (-3.3 m/s) (2)[/tex]

Since total momentum must be conserved, the final momentum must be equal to the initial one.We know that both players cling together after colliding, so the collision is totally inelastic.So, the final momentum can be expressed as follows:

       [tex]p_{f} =( m_{1} + m_{2} )* v_{f} (3)[/tex]

Replacing by the givens in (3), we get:

       [tex]p_{f} =( m_{1} + m_{2} )* v_{f} = (110 kg + 135 kg)* vf (4)[/tex]

Since (3) must be equal to (4) we can solve for vf, as follows:

       [tex]v_{f} = \frac {110 kg * 4.4 m/s + 135 kg * (-3.3 m/s) }{(110 kg + 135 kg)} = 0.16 m/s (5)[/tex]

Since the initial momentum has only component in the x-direction, the final one must have component in the x-direction only too.This means that vf is in the x-direction, and due to it is positive, it must aim in the positive x-direction.So, vfx = +0.16 m/s

As Carlos and Manual both push a 4 kg box to the right across a rough floor, the box speeds up at a rate of 2.0 m/s2.(Hint, this is the acceleration.) If you assume that Manual pushes with a force strength of 8.0 N and the friction force of the floor on the box is 5.0 N, then what is the strength of the force that Carlos pushes on the box

Answers

Answer: 5 N

Explanation:

Given

Mass of box [tex]m=4\ kg[/tex]

acceleration of box [tex]a=2\ m/s^2[/tex]

Force applied by Manual [tex]F_m=8\ N[/tex]

Friction force [tex]f=5\ N[/tex]

The net force on the block is [tex]F_{net}=m\times a=4\times 2=8 \N[/tex]

Suppose [tex]F_c[/tex] is the force applied by Carlos

[tex]\Rightarrow F_m+F_c-f=F_{net}\\\Rightarrow F_c=F_{net}-F_m+f\\\Rightarrow F_c=8-8+5=5\ N[/tex]

The strength of the force that Carlos pushes on the box will be [tex]F_c=5\ N[/tex]

What is force?

The force is defined as the external effort applied on any object to move it or to restrict it.

Here following information is given in the question:

Mass of the box m=4 kg

The acceleration of the box [tex]a=2\ \frac{m}{s^2}[/tex]

The force applied by the Manual [tex]F_m=8\ N[/tex]

The frictional force is [tex]F_f=5\ N[/tex]

The net force on the body will be calculated by

[tex]F_{net}=m\times a=4\times 2=8\ N[/tex]

The force that Carlos pushes on the box will be calculated by the equilibrium of the forces:

[tex]F_m+F_c-F_f=F_{net}[/tex]

[tex]8+F_c-5=8[/tex]

[tex]F_c=5\ N[/tex]

Thus the strength of the force that Carlos pushes on the box will be [tex]F_c=5\ N[/tex]

To know more about forces follow

https://brainly.com/question/388851

Enter your passwor
Accounts
What happens when you move two
objects far apart from each other?
A. The force of gravity increases.
B. The force of gravity decreases.
C. Distance does not affect the force of gravity.
D. The friction between the two objects will increase.

Answers

Answer:

C. Distance does not affect the force of gravity.

An automobile is traveling on a long, straight highway at a steady 80.0 mi/h when the driver sees a wreck 190 m ahead. At that instant, she applies the brakes (ignore reaction time). Between her and the wreck are two different surfaces. First there is 100 m of ice, where the deceleration is only 1.20 m/s2 . From then on, it is dry concrete, where the deceleration is a more normal 6.80 m/s2 .

a) What was the car’s speed just after leaving the icy portion of the road?
b)What is the total distance her car travels before it comes to a stop?
c)What is the total time it took the car to stop?

Answers

Answer:

a) The car’s speed just after leaving the icy portion of the road is the first part

Explanation:

Other Questions
giving thanks and brainliest for best answer name two mistakes that contributed to the russian people becoming disillusioned with their involvement in the first world war Your title information should go at the top of the page. Make sure the text is large enough to be eye-catching. Your readers should know immediately what your infographic is about when they look at it.Next, you should create a draft of where your graphics will go. Your most important information should be the most noticeable, so think about placing those graphics in prominent spots or make them a little larger. Remember, you can group similar information together, or order the information to illustrate a process or trend.Once you have a layout, you can start creating the graphics. You can create your infographic as a poster or make it on the computer. Remember to use color and icons to create cohesion and highlight important data. Here are some things to look at while reviewing:Will your graphics help a reader understand the information quickly and easily?Are there any errors in your data?Are there any grammatical or spelling mistakes?When you are happy with this project upload the final product below What year was this question the dbq the 1920s have been characterized as a decade of economic, social and cultural change. analyze the extent to whihc the first world war and consumerism affected united states sociuety during this period? a quelle phase de la guerre la bataille de Verdun appartient-elle? URGENT! Please only answer if you know though. How did the Black Death affect the economy during the middle ages? What is the converse of the statement? if p then q A If q, then p.B If not p, then q.C If not p, then not q.D If not q, then not p. Help plz helpppppppppppppp 40 of the cats at the pet store are black, which is 25% of all cats. How many cats are there at the pet store Uhm what is the mean of 0,3,6,7,9?? You are comparing replacing the current lab, which has a cost function of 400,000 + 15*Volume, with an automated lab that has a cost function of 500,000 + 10*Volume. Doing so would reduce the error rate from 1.5 percent to 1 percent. Your volume is expected to be 45,000 tests per year.a. You should keep the current lab because its fixed costs are smaller. b. You should adopt the automated lab because its total costs and error rate are smaller. c. You should keep the current lab because its total costs and error rate are about the same. d. None of the above What is the diameter of C?22 cm3.25 cm6.5 cm13 cm 876/60 pls what is the answer Which of the following United States agencies is NOT concerned with international affairs?A.Central Intelligence AgencyB.National Security AgencyC.Federal Bureau of InvestigationD.National Security CouncilPlease select the best answer from the choices providedABCD please help!! due soon, if explained ill give brainlest thanks! please be serious!!Michelle is packing cubes into boxes. She found that 33 cubes wouldfit into one box. If she has 1,244 cubes, what percent of the cubes fitsin one box? WHICH WAVE DESCRIBES THE DESCRIPTION BELOW the energy runs perpendicular to the direction of the wave or matter? 1) Mechanical 2) Longitudinal 3) Transverse 4) Electromagnetic 30 POINTS AND BRAINLIEST!!!!!!!!!!!Lizzy gets her paycheck every 10 days. Her husband, Don gets a paycheck every 14 days. On July 3, they both get a paycheck. How many days will pass before they both get a check on the same day Help pleaseee I need help NOW Which practice of the Catholic Church did Martin Luther criticize in his Ninety-Five Theses of 1517?