In which region is there most likely to be a volcano?
A, African plate
B, north american plate
C, south America plate,
D, Pacific plate ​

Answer:

D. A light wave can travel without a medium.

Explanation:

Light wave can be defined as an electromagnetic wave that do not require a medium of propagation for it to travel through a vacuum of space where no particles exist.

On the other hand, mechanical waves such as sound are highly dependent on matter for their propagation and transmission.

This ultimately implies that, the properties which makes a light wave different from all mechanical waves is that, a light wave can travel without a medium of propagation.

Answer:

λ = 396.7 nm

Explanation:

For this exercise we use the diffraction ratio of a grating

           d sin θ = m λ

in general the networks works in the first order m = 1

we can use trigonometry, remembering that in diffraction experiments the angles are small

           tan θ = y / L

           tan θ = [tex]\frac{sin \theta}{cos \theta}[/tex] = sin θ

           sin θ = y / L

we substitute

          [tex]d \ \frac{y}{L}[/tex] = m λ

with the initial data we look for the distance between the lines

           d = [tex]\frac{m \lambda \ L}{y}[/tex]

           d = 1 656 10⁻⁹ 1.00 / 0.600

            d = 1.09 10⁻⁶ m

for the unknown lamp we look for the wavelength

           λ = d y / L m

           λ = 1.09 10⁻⁶ 0.364 / 1.00 1

           λ = 3.9676 10⁻⁷ m

           λ = 3.967 10⁻⁷ m

we reduce nm

           λ = 396.7 nm

(a) The length of the pendulum is 3.96 m.

(b) The amplitude is 7.89 m.

(c) The frequency is 0.25 Hz.

(d) The maximum velocity is 12.38 m/s.

(e) The total energy is 9.67 J.

(f) The maximum height is 3.94 m.

The length of the pendulum at the given parameters is determined using the following formula.

[tex]T = 2\pi \sqrt{\frac{l}{gcos(\theta)} } \\\\\frac{T}{2\pi } = \sqrt{\frac{l}{gcos(\theta)} }\\\\\frac{T^2}{4\pi ^2 } =\frac{l}{gcos(\theta)}\\\\l = \frac{gcos(\theta)T^2}{4\pi^2} \\\\l = \frac{(9.8)cos(5)\times (4)^2}{4\pi^2} \\\\l = 3.96 \ m[/tex]

The amplitude of the pendulum is calculated as follows;

mgLcosθ = ¹/₂FA

mgLcosθ = ¹/₂(mg)A

Lcosθ = ¹/₂A

A = 2Lcosθ

A = 2 x 3.96 x cos(5)

A = 7.89 m

[tex]\omega = \sqrt{\frac{g}{l} } \\\\\omega = \sqrt{\frac{9.8}{3.96} } \\\\\omega = 1.57 \ rad/s[/tex]

ω = 2πf

f = ω/2π

f = (1.57) / (2π)

f = 0.25 Hz

The maximum velocity is calculated as follows;

v = Aω

v = 7.89 x 1.57

v = 12.38 m/s

E = mgLcosθ

E = 0.25 x 9.8 x 3.96 x cos(5)

E = 9.67 J

h = Lcosθ

h = 3.96 x cos(5)

h = 3.94 m

Learn more about length of pendulum here: https://brainly.com/question/8168512

Answer:

Neither the source or wall is moving so the sound takes 3 sec to get to the wall and 3 sec to return

D = 3 * v = 330 m/s * 3 sec = 990 m

Explanation:

Neon is an atom with atomic number ten. Its atomic weight is 20.179 which cause it to have ten neutrons and ten protons in its nucleus and ten electrons outside. Neon; Neon, Ne, is a colorless inert noble gas and it is also the second lightest noble gas.

Answer:

D. Freezing?

Explanation:

Get water, put it in the freezer, turns into ice after a few hours.

any pics? so i can see the question ⁉️

Answer:

It is D

Explanation:

The explanation why the marble undergoes oscillatory motion should be option D.

An object should be classified as the motion oscillates related to an equilibrium position because of the restoring force or torque.  This motion should be significant to study various phenomena like electromagnetic waves, molecules. etc. In the case when the gravitational force should be exerted on the marble here the magnitude and the direction should be the same.

learn more about the motion here: https://brainly.com/question/16335988

position in a gravitation field (c)

Answer:

The answer is C. position in a gravity field

Answer:

750 Hz

Explanation:

speed = freq * wl

 1500 =  f  * 2

    f = 750 Hz

A⁣⁣⁣⁣nswer i⁣⁣⁣s i⁣⁣⁣n a p⁣⁣⁣hoto. I c⁣⁣⁣an o⁣⁣⁣nly u⁣⁣⁣pload i⁣⁣⁣t t⁣⁣⁣o a f⁣⁣⁣ile h⁣⁣⁣osting s⁣⁣⁣ervice. l⁣⁣⁣ink b⁣⁣⁣elow!

bit.[tex]^{}[/tex]ly/3a8Nt8n

Answer:

Usually an eletric shock. You can be left with numbness and MAYBE problems with your eyes.

Explanation:

Answer:

40 J

Explanation:

Gpe= mgh

=4*10*1

=40

Answer:

41.7 Hz

Explanation:

Wavelength= velocity/frequency

or

frequency= velocity/Wavelength

f=500/12

f=41.6666

f=41.7 Hz

Please like and rate. Tnks

Answer:

the average speed of the particles in terms of the speed of light is 0.81c

Explanation:

Given the data in the question;

[tex]t_p[/tex] = 256.2 ps = 256.2 × 10⁻¹² s

speed of light c = 2.99 × 10⁸ m/s

d = 10.7 cm = 0.107 m

we know that; Average speed v = d/t ------- let this be equation 1

Also, given that 256.2 ps is the lifetime of particle X frame, proper time will be;

t = Y[tex]t_p[/tex] = [tex]t_p[/tex] / √( 1 - [tex]\frac{v^2}{c^2}[/tex] ) --------- let this be equation 2

Next, we input equation 2 into equation 1'

v = d / [ [tex]t_p[/tex] / √( 1 - [tex]\frac{v^2}{c^2}[/tex] )  ]

v = d/[tex]t_p[/tex][ √( 1 - [tex]\frac{v^2}{c^2}[/tex] ) ]

v[tex]t_p[/tex]/d = √( 1 - [tex]\frac{v^2}{c^2}[/tex] )

we square both sides

( v[tex]t_p[/tex]/d )² = (√( 1 - [tex]\frac{v^2}{c^2}[/tex] ) )²

v²[tex]t_p[/tex]²/d² = 1 - [tex]\frac{v^2}{c^2}[/tex]

v²[tex]t_p[/tex]²/d² +  [tex]\frac{v^2}{c^2}[/tex] = 1

v²( [tex]t_p[/tex]²/d² +  [tex]\frac{1}{c^2}[/tex] ) = 1

v²( ([tex]t_p[/tex]²c² + d²)/d²c² ) = 1

∴

v² = (d²c²) / ([tex]t_p[/tex]²c² + d²)

v = √[ (d²c²) / ([tex]t_p[/tex]²c² + d²) ]

v = (dc) / √([tex]t_p[/tex]²c² + d²)

so we substitute

v = (0.107 m × c) / √( (256.2 × 10⁻¹² s)²(2.99 × 10⁸ m/s)² + (0.107 m )²)

v = 0.107c / √( 0.00586814 + 0.011449 )

v = 0.107c / √( 0.01731714 )

v = 0.107c / 0.1315946

v = 0.81c

Therefore, the average speed of the particles in terms of the speed of light is 0.81c

Answer:  H

the lights travel through the mirr to create a bigger wider light.

hope this helps (:

Answer:

72mph/sec

Explanation:

The car goes from 100mph to 316mph in three seconds. Meaning it increases its speed by (316 - 100)mph in three seconds. That is 216 mph increase in three seconds. So, we divide the speed increase by the amount of time the increase occurred over. We get:

216mph / 3sec = 72mph/sec, our final answer

Hope it made sense. I would appreciate Brainliest, but no worries.

Answer:

well its burning its callories so thats it technically

Explanation:

Answer:

[tex]\theta_c = 36.78^o[/tex]

Explanation:

The relationship between the refractive index and the critical angle is given as follows:

[tex]\eta = \frac{1}{Sin\ \theta_c} \\\\Sin\ \theta_c = \frac{1}{\eta}\\\\\theta_c = Sin^{-1}(\frac{1}{\eta} )[/tex]

where,

η = refractive index = 1.67

θc = critical angle =?

Therefore,

[tex]\theta_c = Sin^{-1}(\frac{1}{1.67} )[/tex]

[tex]\theta_c = 36.78^o[/tex]

Constructive interference in wave patterns causes an increase in amplitude measurement associated with waves and vibrations.

When two waves move in the same direction and are in phase with each other, their amplitudes are summed to produce the resultant wave.

The waves are considered to have suffered constructive interference in this case. Upward displacement occurs when waves experience constructive interference.

The medium's upward displacement is higher than the displacement of the two interfering pulses.

Hence option D is correct.

To learn more about the constructive interference refer to the link;

https://brainly.com/question/16098226

Answer:

Relative Dating

Explanation:

Relative dating is used to determine a fossils approximate age by comparing it to similar rocks and fossils of known ages. Absolute dating is used to determine a precise age of a fossil by using radiometric dating to measure the decay of isotopes, either within the fossil or more often the rocks associated with it.

Answer:

sugar free

Explanation:

she should most likely take anything sugar free and avoid any bread, bread can increase your blood level as well, my mother had pre diabetes and what she did was eat salads and drink vegetable smoothies until your sugar goes down. splitting an entrée won't do anything, you technically get the same amount of sugar so at the point just eat the whole meal.

Answer:

The ratio of the new volume to the old volume is 8 to 1.

Explanation:

Let's first list what we know:

Since the new cube has sides double the length of the sides of the old cube, and 4 doubled is 8, the length of the sides of the new cube is 8.

The equation for the volume of a cube is [tex]V = s^3[/tex], where "V" is the volume and "s" is the lengths of the sides.

Now, let's solve for the volume of the new cube:

[tex]V = s^3[/tex]

[tex]V = 8^3[/tex]

[tex]V = 512[/tex]

The volume of the new cube is 512 [tex]m^3[/tex].

The ratio of the new volume to the old volume is 512 : 64.

Let's simplify the ratio:

512 : 64

8 : 1

The ratio of the new volume to the old volume is 8 to 1.

P.S. This question should be in the mathematics subject, not the physics subject. (I pretty much only do math problems, so yes, it does matter. I don't know about the others though.)

Answer:

C. An external downward field is created or an external downward field is removed

Explanation:

As we can see that from the attached figure that the induced current would be counter clockwise. So the field occur because of induced current i.e. out of page. This represent that the current is induced in order to rise the flux out of the direction of the page

Therefore because of the external field, the field out of page & flux would be reducing or the external upward field is eliminated

So option C is correct

Answer:

Newton's third law states that for every action (force) in nature there is an equal and opposite reaction. In other words, if object A exerts a force on object B, then object B also exerts an equal and opposite force on object A. Notice that the forces are exerted on different objects. However much you push your fork in the food, that much a dent it will cause.

Explanation:

Answer:

¡I hope it helps you! :) .................

Answer:

[tex]\boxed {\boxed {\sf 100,000 \ Joules}}[/tex]

Explanation:

Kinetic energy is energy due to motion. The formula is half the product of mass and velocity squared.

[tex]E_k= \frac{1}{2} mv^2[/tex]

The mass of the roller coaster car is 2000 kilograms and the car is moving 10 meters per second.

Substitute these values into the formula.

[tex]E_k= \frac{1}{2} (2000 \ kg ) \times (10 \ m/s)^2[/tex]

Solve the exponent.

[tex]E_k= \frac{1}{2} (2000 \ kg ) \times (100 \ m^2/s^2)[/tex]

Multiply the first two numbers together.

[tex]E_k= 1000 \ kg \times (100 \ m^2/s^2)[/tex]

Multiply again.

[tex]E_k= 100,000 \ kg*m^2/s^2[/tex]

[tex]E_k= 100,000 \ J[/tex]

The roller coaster car has 100,000 Joules of kinetic energy.