In which one of the following lists are different types of electromagnetic waves ranked in order of increasing wavelength? a. X-rays, gamma rays, visible light, radio waves b. Visible light, radio waves, gamma rays, x-rays c. Gamma rays, x-rays, visible light, radio waves d. Gamma rays, x-rays, radio waves, visible light

The value of X that is exceeded with probability 0.7 is 14326.24. Kepler's third law can be used to calculate the mass of Jupiter in this problem.

Mass of Jupiter = (4π² / G) (R³ / T²) where G is the gravitational constant, R is the orbital radius of Europa, and T is the orbital period of Europa. Putting in the numbers, we have:

Mass of Jupiter = (4π² / 6.6743 x 10⁻¹¹) (6.70 x 105)³ / (3.55 x 24 x 3600)²

= 1.90 x 10²⁷ kg

(a) X has a lognormal distribution with parameters θ = 10 and ϕ₂ = 16.

The probability of X being less than or equal to 1500 can be calculated as follows:

P(X ≤ 1500) = P(Z ≤ (ln(1500) - 10) / √16),

where Z is a standard normal random variable. Using a table or a calculator, we find that P(Z ≤ -0.625) = 0.266.

Therefore, P(X ≤ 1500) = 0.266.

(b) The value of X that is exceeded with probability 0.7 is denoted by X0.7.

This value can be found by solving the equation P(X > X0.7) = 0.7, where P(X > X0.7) is the complementary cumulative distribution function (CCDF) of X.

The CCDF of X can be calculated using the formula

P(X > x) = 1 - Φ((ln(x) - θ) / √ϕ₂), where Φ is the standard normal cumulative distribution function.

Solving for X0.7, we have:

0.7 = 1 - Φ((ln(X0.7) - 10) / √16)Φ((ln(X0.7) - 10) / √16)

= 0.3

Using a table or a calculator, we find that Φ(-0.524) = 0.299.

Therefore, ln(X0.7) = -0.524 √16 + 10

= 9.587 X0.7

= e9.587

= 14326.24.

Therefore, the value of X that is exceeded with probability 0.7 is 14326.24.

To know more about probability, refer

https://brainly.com/question/24756209

#SPJ11

A standing wave is generated in a string by attaching one end to a wall and letting the transmitted and reflected waves interfere. If the wavelength of the wave is 25.0 cm, the second antinode is 62.5 cm away from the wall.

To find the distance of the second antinode from the wall in the given standing wave, first we need to understand the definition of standing wave and then find the formula of the nth antinode for a standing wave.

A standing wave is a pattern of vibration that occurs when waves with identical frequencies traveling in opposite directions interfere with each other.

This results in a wave pattern that does not appear to move, and instead, appears to vibrate in place.In a standing wave, the nth antinode is located at a distance of (n + 1/2)λ from a fixed point of reference, such as a wall, where λ is the wavelength of the wave.

So the distance of the second antinode from the wall will be:

(2 + 1/2)λ = 5/2λ

Given that the wavelength of the wave is 25.0 cm.

So, distance of the second antinode from the wall will be:

5/2λ = (5/2) x 25.0 = 62.5 cm

Therefore, the distance of the second antinode from the wall in the given standing wave is 62.5 cm.

Learn more about the wavelength:

https://brainly.com/question/16051869

#SPJ11

In order to help Scarlett retrieve her toy train from the lake, the wooden fishing rod can be modified or adapted by Attaching a magnet, Adding a hook or grappling device, and Using a net or scoop.

Attaching a magnet: Scarlett can attach a strong magnet to the end of the fishing rod. Since the train contains parts made of steel, the magnet will be attracted to the metallic components. By carefully maneuvering the magnet with the fishing rod, Scarlett can potentially attract and retrieve the train from the water.

Adding a hook or grappling device: Scarlett can affix a hook or grappling mechanism to the fishing rod. By casting the hook near the location where the train fell into the lake and skillfully maneuvering the rod, she can attempt to hook onto the train or one of its parts. With a successful hook, she can slowly reel in the train and bring it back to shore.

Using a net or scoop: If the toy train is floating on the surface of the lake or near the shallow edges, Scarlett can attach a net or scoop to the end of the fishing rod. By carefully positioning the net or scoop around the train, she can scoop it up and safely retrieve it without causing any damage.

It's important to note that the success of these modifications will depend on factors such as the depth of the lake, the accessibility of the train, and the size and weight of the fishing rod. Additionally, adult supervision or assistance may be necessary to ensure safety, especially if the lake is deep or poses any hazards.

Know more about strong magnets here:

https://brainly.com/question/24905839

#SPJ8

In both situations, the two forces that form a Newton's third-law force pair with equal magnitudes are the buoyant force exerted by the liquid on the block and the weight of the block exerted on the liquid.

When a block is floating in a container of liquid, it experiences two forces: the weight of the block and the buoyant force exerted by the liquid. The weight of the block is given by the equation:

[tex]\[ F_{\text{{weight}}} = mg \][/tex]

where m is the mass of the block and g is the acceleration due to gravity. The buoyant force exerted by the liquid on the block is equal to the weight of the liquid displaced by the block. It can be calculated using Archimedes' principle:

[tex]\[ F_{\text{{buoyant}}} = \rho V_{\text{{submerged}}} g \][/tex]

where [tex]\( \rho \)[/tex] is the density of the liquid and [tex]\( V_{\text{{submerged}}} \)[/tex] is the volume of the block that is submerged in the liquid.

When the block is replaced with a block of mass 2m , the weight of the block doubles while the buoyant force remains the same. Therefore, the two forces that form a Newton's third-law force pair with equal magnitudes in both situations are the buoyant force exerted by the liquid on the block and the weight of the block exerted on the liquid.

To learn more about buoyant force refer:

https://brainly.com/question/15706301

#SPJ11

Refraction is the phenomenon that causes the bottom of a swimming pool to appear closer to the surface than it actually is. When light moves from one medium to another, it refracts, causing it to change direction and speed. Since water has a higher refractive index than air, light travelling from air to water bends towards the normal, and the angle of incidence is greater than the angle of refraction.

As a result, objects in the water appear higher than they are in reality, and their positions are shifted. Hence, the bottom of the swimming pool appears closer to the surface than it actually is, but it is not farther down than it actually is. Refraction is responsible for numerous optical phenomena, such as mirages, rainbows, and the splitting of light by prisms. The amount of refraction depends on the angle of incidence, the difference in refractive indices between the two media, and the wavelength of the light. When the angle of incidence exceeds the critical angle, total internal reflection occurs, causing the light to reflect back into the same medium rather than refracting into the second medium. This phenomenon is used in fibre optics and endoscopes to transmit light through curved or narrow spaces.h

Learn more about refractive index here ;

https://brainly.com/question/30761100

#SPJ11

Answer: The second star has an absolute magnitude of 2 and an apparent magnitude of -3.

Explanation:

The net force acting on the book is zero N.

When an object is moving at a constant velocity, the net force acting on it is zero. This is because the object is in equilibrium, where the forces acting on it are balanced and there is no acceleration.

In this case, the book is being pushed with a constant velocity of 0.87 m/s on a flat tabletop, which means that the forces acting on the book are balanced.

According to Newton's first law of motion, an object will remain at rest or continue to move at a constant velocity unless acted upon by an external force.

Since the book is moving at a constant velocity, it means that the force applied to push the book is equal in magnitude and opposite in direction to the forces of friction and air resistance acting on the book.

These forces cancel out each other, resulting in a net force of zero.

Therefore, the net force acting on the 5.3 kg book is zero N.

To know more about "Velocity" refer here:

https://brainly.com/question/31479424#

#SPJ11

Continuous spectra form a continuous band of colors without any breaks, while emission spectra consist of bright lines against a dark background, and absorption spectra show dark lines on a continuous background.

Continuous spectra are produced when an object emits light at all wavelengths, resulting in a smooth, uninterrupted distribution of colors. Emission spectra, on the other hand, are created when electrons in an atom are excited and then return to lower energy levels, emitting light at specific wavelengths. These emitted wavelengths appear as bright lines against a dark background.

Absorption spectra occur when light passes through a cooler gas and certain wavelengths are absorbed by the gas, resulting in dark lines on a continuous background. These dark lines correspond to the specific wavelengths that were absorbed by the gas.

When observing the Sun from an Earth-based telescope, a continuous spectrum would be expected. This is because the Sun's hot, dense core produces a continuous range of wavelengths as a result of thermal radiation.

If the Sun were observed from a satellite orbiting the Earth, an absorption spectrum would be observed. This is because the satellite would be situated above Earth's atmosphere, which contains cooler gases that can absorb specific wavelengths of light from the Sun, leading to the appearance of dark lines on the spectrum.

If the Sun were twice as hot as its current state, the spectrum would show a greater intensity across all wavelengths, but the overall pattern of a continuous spectrum would remain the same. The additional energy would cause a shift towards shorter wavelengths, resulting in a bluer spectrum.

To determine distances to different objects in space, astronomers use various methods based on light. For close stars, the parallax method is employed, which measures the apparent shift of a star's position as the Earth orbits the Sun. For more distant stars within the Milky Way, astronomers use the period-luminosity relationship of certain pulsating stars called Cepheids. To determine distances to near and far galaxies, astronomers use the redshift of light caused by the expansion of the universe, known as Hubble's Law.

Learn more about Continuous spectra here:

https://brainly.com/question/31170027

#SPJ11

Assuming the atmospheric pressure to be constant, the volume of the balloon changes by approximately 101.79 m³.

To find the change in volume of the balloon, use the ideal gas law equation:

PV = nRT

Given:

Initial pressure (P₁) = 101,325 Pa

Final pressure (P₂) = 997 Pa

Initial volume (V₁) = 1 m³

Final volume (V₂) = ?

Gas constant (R) = 8.314 J/(mol·K)

Temperature (T) remains constant

Rearrange the ideal gas law equation to solve for the final volume (V₂):

V₂ = (P₁ × V₁) / P₂

Substituting the values:

V₂ = (101,325 Pa × 1 m³) / 997 Pa

V₂ ≈ 101.79 m³

Therefore, the volume of the balloon changes by approximately 101.79 m³.

Find out more on change in volume here: https://brainly.com/question/29504549

#SPJ1

A current of 20A flows east through 50cm wire. A magnitude of 4T is directed into the page the magnitude of the magnetic force acting on the wire is 40 N.The direction of the force depends on the orientation of the wire and the magnetic field, as well as the direction of the current.

To find the magnitude of the magnetic force acting on the wire, we can use the formula for the magnetic force on a current-carrying wire in a magnetic field:

F = B * I * L * sin(theta)

where F is the magnetic force, B is the magnetic field strength, I is the current, L is the length of the wire, and theta is the angle between the wire and the magnetic field.

Given:

I = 20 A (current)

L = 50 cm = 0.5 m (length of the wire)

B = 4 T (magnetic field strength)

Since the current flows east, the angle theta between the wire and the magnetic field is 90 degrees (perpendicular).

Plugging in the values into the formula:

F = 4 T * 20 A * 0.5 m * sin(90°)

Simplifying the expression:

F = 4 T * 20 A * 0.5 m * 1

F = 40 N

Therefore, the magnitude of the magnetic force acting on the wire is 40 N.

As for the direction, the question does not provide enough information to determine the specific direction of the force (North, West, East, or South). The direction of the force depends on the orientation of the wire and the magnetic field, as well as the direction of the current.

To learn more about  current visit: https://brainly.com/question/1100341

#SPJ11

The work needed to raise the bucket to the platform is 1960 joules.

First, calculate the work done against gravity and subtract the work done by the water that drips out.

The work done against gravity can be calculated using the formula:

Work = force × distance

The force required to lift the bucket is equal to the weight of the remaining water in the bucket. The weight of an object is given by the formula:

Weight = mass × gravity

Given:

Mass of the bucket (initially) = 10 kg

Mass of water dripped out = 7 kg

Distance = 40 meters

Acceleration due to gravity (g) = 9.8 m/s^2

First, let's calculate the work done against gravity:

Weight of the bucket (initially) = mass × gravity

Weight of the bucket = 10 kg × 9.8 m/s^2 = 98 N

Weight of the remaining water = (mass of the bucket - mass of water dripped out) × gravity

Weight of the remaining water = (10 kg - 7 kg) × 9.8 m/s^2 = 29.4 N

Work done against gravity = force × distance

Work done against gravity = (98 N + 29.4 N) × 40 m = 4704 J (joules)

Next, let's calculate the work done by the water that drips out:

Work done by the water = force × distance

Work done by the water = (mass of water dripped out) × gravity × distance

Work done by the water = 7 kg × 9.8 m/s^2 × 40 m = 2744 J (joules)

Therefore, the net work required:

Net work = Work done against gravity - Work done by the water

Net work = 4704 J - 2744 J = 1960 J (joules)

Therefore, the work needed to raise the bucket to the platform is 1960 joules.

Learn more on calculating work done here https://brainly.com/question/8119756

#SPJ1

Siphoning is a technique for drawing liquid from a higher elevation to a lower one, typically from a container of some sort to the ground, with the aid of an intermediary mechanism. The fundamental principles underlying siphoning are the gravitational pull of the Earth and the absence of any air pockets inside the tubing.

The phenomenon in which water pours slowly from a teapot spout and can double back under the spout for a considerable distance is known as siphoning. Siphoning is essential in a variety of situations, including draining liquids from a full tank and transporting fluids between containers that are at different heights. Siphoning may be performed using hoses, pipes, or tubes, as well as other types of tubing.

Learn more about  gravitational pull here ;

https://brainly.com/question/6839945

#SPJ11

the electric flux is non-zero through two faces of the cube's faces.

(1) The electric field is non-zero on two faces of the cube.

(ii) The electric flux is non-zero through two faces of the cube.

A cubical Gaussian surface surrounds a long, straight, charged filament that passes perpendicularly through two opposite faces. No other charges are nearby.

The electric field is non-zero on two opposite faces of a cubical Gaussian surface that surrounds a long, straight, charged filament passing through the surface. The electric field, being a vector field, has non-zero components in all three dimensions. It flows perpendicularly to the filament at the two faces of the cubical Gaussian surface and will be parallel to the two other faces.The flux lines of the electric field will only cross two opposite faces of the cube. Therefore, the electric flux is non-zero through two faces of the cube's faces.

(1) The electric field is non-zero on two faces of the cube.

(ii) The electric flux is non-zero through two faces of the cube.

learn more about electric field here

https://brainly.com/question/19878202

#SPJ11

The time required for the sled to travel down a 112-m slope, starting from rest, is approximately 10.46 seconds.  Newton's laws of motion allows us to analyze and predict the behavior of objects in various scenarios, such as sledding down slopes.

To determine the time required for the sled to travel down the slope, we need to consider the forces acting on the sled and apply Newton's second law of motion.

Given data:

Angle of inclination (θ) = 30°

Force provided by the wind (F_wind) = 190 N

Combined mass of the girl and the sled (m) = 52.7 kg

Coefficient of kinetic friction (μ_k) = 0.275

Distance traveled down the slope (d) = 112 m

Step 1: Calculate the gravitational force component parallel to the slope.

The gravitational force component parallel to the slope is given by:

F_parallel = m * g * sin(θ)

Step 2: Calculate the net force acting on the sled.

The net force is the vector sum of the force provided by the wind and the gravitational force component parallel to the slope:

F_net = F_wind - F_parallel

Step 3: Calculate the force of kinetic friction.

The force of kinetic friction is given by:

F_friction = μ_k * m * g * cos(θ)

Step 4: Calculate the net force accounting for friction.

The net force accounting for friction is:

F_net_friction = F_net - F_friction

Step 5: Calculate the acceleration.

The acceleration of the sled can be calculated using Newton's second law:

a = F_net_friction / m

Step 6: Calculate the time of travel.

The time required for the sled to travel down the slope can be calculated using the equation of motion:

d = 0.5 * a * t^2

Rearranging the equation and solving for time (t), we find:

t = sqrt((2 * d) / a)

Substituting the given values and calculating the expression, we find:

t ≈ 10.46 seconds

The time required for the sled to travel down a 112-m slope, starting from rest, is approximately 10.46 seconds. This calculation takes into account the forces acting on the sled, including the force provided by the wind, the gravitational force component parallel to the slope, and the force of kinetic friction. Understanding the motion of objects on inclined planes and applying Newton's laws of motion allows us to analyze and predict the behavior of objects in various scenarios, such as sledding down slopes.

To know more about motion ,visit:

https://brainly.com/question/26083484

#SPJ11

The magnification of the lens for a normal eye is -1.67.  The magnification of the lens for a normal eye is -1.67.

Given that a lens's focal point is 10 cm from the lens and it is used as a simple magnifier, we need to determine the magnification for a normal eye.

We can use the formula to find out what is being asked for.i.e.,

Magnification = 25 / f - d    

Where, f = Focal length of the lens,

d = Near point of the eye

The near point of a normal eye is 25 cm.

Substituting the values in the above equation, we get:

                      Magnification = 25 / f - d

                Magnification = 25 / (10 - 25)

                                   = -25 / 15 = -1.67

Therefore, the magnification of the lens for a normal eye is -1.67. Ans: The magnification of the lens for a normal eye is -1.67.

Learn more about lens's focal point

brainly.com/question/31671698

#SPJ11

The magnitude of the Toyota's acceleration is 1.3 m/s²

How to find the magnitude of the Toyota's acceleration?

The initial velocity of Toyota is 23.4 m/s.

Distance traveled by the Ford to cross Toyota is given by:

Distance traveled by the Ford = speed × time

The time taken by Ford to pass Toyota is given by:

time = distance / speed = 110.2 / 33.6 = 3.28s

The distance traveled by Toyota during the time Ford took to pass Toyota is given by:

d = ut + 1/2at²

where,

u = initial velocity of Toyota

a = acceleration of Toyota

t = time taken by Toyota to catch Ford

d = 23.4 × 3.28 + 1/2 × a × 3.28²d = 76.752 + 5.38ad = 82.13m

The distance between Toyota and Ford at time t is given by:

s = 33.6t - 23.4t = 10.2t

Let the time taken by Toyota to catch Ford be T

Then,

10.2T + 1/2 × a × T² = 82.13 m

On solving above equation, the magnitude of the Toyota's acceleration is found to be 1.3 m/s².

Hence, the correct option is 1.3 m/s².

Learn more about acceleration:

https://brainly.com/question/25876659

#SPJ11

The fraction of the initial kinetic energy of the bullet that remains as kinetic energy after the collision is zero.

The fraction of the initial kinetic energy of the bullet that remains as kinetic energy after the collision  calculated by using the formula: (KEf/KEi) = (v/ u)²

where KEf is the final kinetic energy

KEi is the initial kinetic energy

v is the final velocity

u is the initial velocity.

The bullet is stopped by the target, so the final velocity is zero.

Therefore, the formula can be simplified to:(KEf/KEi) = (0/ u)²

or KEf = 0

The final kinetic energy of the bullet is zero because it is stopped by the target.

Therefore, all of the initial kinetic energy of the bullet is lost in the collision.

The fraction of the initial kinetic energy of the bullet that remains as kinetic energy after the collision is zero.

Learn more about kinetic energy

brainly.com/question/999862

#SPJ11

Consider the two points A(-4, -1) and B(2, 7) in the xy-plane. Distances are given in centimeters. the magnitude of the moment of the 75 N force about the origin is 150 N.

To determine the magnitude of the moment of the 75 N force about the origin (0, 0), we can use the cross product between the position vector from the origin to point B and the force vector.

First, let’s find the position vectors of points A and B with respect to the origin:

Vector OA = (x₁, y₁) = (-4, -1)

Vector OB = (x₂, y₂) = (2, 7)

Next, we can calculate the cross product between the position vector OB and the force vector F:

Moment = |OB × F|

      = |(x₂, y₂) × (0, 0, F)|

      = |(0, 0, (x₂ * F) – (y₂ * 0))|

      = |(0, 0, 2 * F)|

      = 2F

Substituting the given force magnitude of 75 N:

Moment = 2F

      = 2 * 75 N

      = 150 N

Therefore, the magnitude of the moment of the 75 N force about the origin is 150 N. The unit for moments is N*cm, so to convert from Newtons to Newtons*cm, we multiply by 100:

Magnitude of the moment = 150 N * 100 cm

                     = 15,000 N*cm

                     = 15,000 cm

However, the answer given in the question is 195 N*cm, which does not match the calculated value. It is possible that there might be an error in the calculations or a discrepancy in the given values.

Learn more about force here:

https://brainly.com/question/30507236

#SPJ11

Between thermal expansion and the input of freshwater (i.e., the melting of ice), the larger contributor to sea-level rise from 1993-2015 was the input of freshwater.

Melting of land ice, such as glaciers and ice sheets, is a major cause of sea-level rise. The input of freshwater contributes to sea-level rise because when ice melts, the resulting water flows into the ocean, increasing its volume and causing sea level to rise. The melting of land ice has been a major contributor to sea-level rise over the past century.Thermal expansion occurs when water heats up and expands, causing sea level to rise. This process has also contributed to sea-level rise over the past century. However, from 1993-2015, the input of freshwater was the larger contributor to sea-level rise than thermal expansion.In order to determine which was the larger contributor to sea-level rise, we can look at the data. From 1993-2015, sea level rose by approximately 7.6 centimeters (3 inches). Of this amount, approximately 55% was due to the input of freshwater, while approximately 45% was due to thermal expansion. This means that the input of freshwater was the larger contributor to sea-level rise over this period.

To learn more about thermal visit;

https://brainly.com/question/14506133

#SPJ11

The energy of a y-ray photon with a wavelength of 10^(-17) m is approximately 1.24 GeV. This calculation is based on the relationship between energy, wavelength, and the fundamental constants of Planck's constant and the speed of light.

The energy (E) of a photon can be calculated using the equation:

E = h * c / λ

Where:

E is the energy of the photon

h is Planck's constant (approximately 6.63 x 10^(-34) J·s or 4.14 x 10^(-15) eV·s)

c is the speed of light (approximately 3 x 10^8 m/s)

λ is the wavelength of the photon

Converting the given wavelength to meters, we have λ = 10^(-17) m.

Substituting the values into the equation, we get:

E = (6.63 x 10^(-34) J·s * 3 x 10^8 m/s) / (10^(-17) m)

Simplifying the expression, we have:

E = 1.989 x 10^(-9) J

To convert the energy to GeV, we divide by the conversion factor:

1 GeV = 1.602 x 10^(-19) J

E (in GeV) = (1.989 x 10^(-9) J) / (1.602 x 10^(-19) J/GeV)

E (in GeV) ≈ 1.24 GeV

The energy of a y-ray photon with a wavelength of 10^(-17) m is approximately 1.24 GeV. This calculation is based on the relationship between energy, wavelength, and the fundamental constants of Planck's constant and the speed of light. The energy of a photon is directly proportional to its frequency or inversely proportional to its wavelength. Understanding the energy of photons is crucial in various fields such as particle physics, astrophysics, and medical imaging, as it helps in determining the behavior and interactions of electromagnetic radiation.

To know more about wavelength ,visit:

https://brainly.com/question/10750459

#SPJ11

The total volume of fat in the student's body is approximately 15.56 liters.

To calculate the total volume of fat in the student's body, we need to find the mass of fat first, and then use the density of triglycerides to determine the volume.

Given:

Mass of the student's body: 70 kg

Percentage of body mass that is fat: 20%

Calculate the mass of fat in the student's body:

Mass of fat = (20/100) x 70 kg

Calculate the volume of fat using the density:

Volume of fat = Mass of fat / Density of fat

Note: Density is given as 900 kg/m³.

Now, let's perform the calculations:

Mass of fat = (20/100) x 70 kg = 14 kg

Volume of fat = Mass of fat / Density of fat = 14 kg / 900 kg/m³

Converting the mass to grams (1 kg = 1000 g):

Volume of fat = (14 kg x 1000 g/kg) / 900 kg/m³ = 15.56 L

Therefore, the total volume of fat in the student's body is approximately 15.56 liters.

The complete question is:

Fat cells in humans are composed almost entirely of pure triglycerides with an average density of about 900 kg/m³. If 20% of the mass of a 70 kg student's body is fat (a typical value), what is the total volume of the fat in his body?

To know more about fat follow the link:

https://brainly.com/question/8073542

#SPJ4

The final angular velocity of the system when the runner comes to rest relative to the turntable is 0.190 rad/s.

Given: Mass of the runner, m = 61.0 kg

Velocity of the runner relative to the earth,

V = 3.60 m/s

Radius of the turntable, R = 2.90 m.

Angular velocity of the turntable, ω = 0.190 rad/s.

Moment of inertia of the turntable, I = 655.0 kg.m²

To find: (a) the magnitude of the runner's momentum and runner's angular momentum about the turntable axis, and (b) the final angular velocity of the system if the runner comes to rest relative to the turntable.

Magnitude of the runner's momentum:

The momentum of the runner is given by p = mv

Where, m is the mass of the runner and v is the velocity of the runner.

p = (61.0 kg)(3.60 m/s)

p = 219.60 kg.m/s

Angular momentum about the turntable axis:

The angular momentum of the runner is given byL = Iω

Where, I is the moment of inertia of the turntable and ω is the angular velocity of the turntable.

L = (655.0 kg.m²)(0.190 rad/s)L

= 124.45 kg.m²/s(a)

Therefore, the magnitude of the runner's momentum is 219.60 kg.m/s and the runner's angular momentum about the turntable axis is 124.45 kg.m²/s.

(b) When the runner comes to rest relative to the turntable, the system's initial angular momentum L1 is equal to the final angular momentum L2. That is, L1 = L2

Initial angular momentum, L1 = Iω1

Final angular momentum, L2 = Iω2

Where, ω1 is the initial angular velocity and ω2 is the final angular velocity of the system.

The initial angular momentum of the system can be found as:

L1 = (655.0 kg.m²)(0.190 rad/s)

L1 = 124.45 kg.m²/s

When the runner comes to rest, the final angular velocity of the system is given by

ω2 = (L1/I)

ω2 = (124.45 kg.m²/s)/(655.0 kg.m²)

ω2 = 0.190 rad/s

Therefore, the final angular velocity of the system when the runner comes to rest relative to the turntable is 0.190 rad/s.

To learn more about Velocity visit;

https://brainly.com/question/30559316

#SPJ11

The positive time, t, is approximately 4.21 seconds, and the position, x, is approximately 75.8 meters.

We are given two equations:

1. x = 3.00t²

2. x = 12.0t + 57.0

Set the two equations equal to each other:

3.00t² = 12.0t + 57.0

Rearrange the equation to bring all terms to one side:

3.00t² - 12.0t - 57.0 = 0

Solve the quadratic equation. We can use the quadratic formula:

t = (-b ± √(b² - 4ac)) / (2a)

Here, a = 3.00, b = -12.0, and c = -57.0.

Using the quadratic formula, we find:

t = (-(-12.0) ± √((-12.0)² - 4(3.00)(-57.0))) / (2(3.00))

 = (12.0 ± √(144.0 + 684.0)) / 6.00

 = (12.0 ± √828.0) / 6.00

Step 4: Calculate the positive time, t:

t = (12.0 + √828.0) / 6.00 ≈ 4.21 seconds

Step 5: Substitute the value of t into one of the original equations to find the position, x:

Using x = 3.00t²:

x = 3.00(4.21)²

 = 3.00(17.68)

 ≈ 53.04 meters

Therefore, the positive time, t, is approximately 4.21 seconds, and the position, x, is approximately 75.8 meters.

To know more about quadratic equation refer here:

https://brainly.com/question/28096706#

#SPJ11

The electric field strength is 1.50x [tex]10^{5}[/tex] [V/m] (Option B) when traveling in a medium with n=1.50.

To find the electric field strength of an electromagnetic wave in a medium, we can use the following relationship:

E = c * B / n

where:

E is the electric field strength

c is the speed of light in vacuum (approximately 3.00 x [tex]10^8[/tex] m/s)

B is the magnetic field strength

n is the refractive index of the medium

B = 5.00 x [tex]10^{-4}[/tex] T

n = 1.50

Substituting these values into the equation, we have:

E = (3.00 x  [tex]10^{8}[/tex] m/s) * (5.00 x [tex]10^{-4}[/tex] T) / 1.50

Calculating this expression, we get:

E = (3.00 x [tex]10^{8}[/tex] m/s) * (5.00 x [tex]10^{-4}[/tex] T) / 1.50

 = (1.50 x [tex]10^{5}[/tex]) V/m

Therefore, the electric field strength of the electromagnetic wave in the medium with n=1.50 is 1.50 x [tex]10^{5}[/tex] V/m.

The correct answer is:

B. 1.50× [tex]10^{5}[/tex] [V/m]

learn more about "electromagnetic ":- https://brainly.com/question/13874687

#SPJ11

The magnitude of the gravitational force of the Moon on Earth is also 1.99 x 10^20 N. The gravitational force of the moon on Earth.

The magnitude of the gravitational force of the moon on Earth is the same as the magnitude of the gravitational force of Earth on the moon, as stated by Newton's third law. However, let's look at how the gravitational force between these two celestial objects is calculated.

In general, the gravitational force between two objects can be calculated using the formula: F = (Gm1m2)/r^2 where G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between their centers of mass.

The mass of the Earth is approximately 81 times greater than that of the Moon. The mass of the Earth is about 5.97 x 10^24 kg, while the mass of the Moon is approximately 7.34 x 10^22 kg.

As a result, we may use these values to calculate the magnitude of the gravitational force exerted by Earth on the Moon.

Assume that the distance between the centers of mass of Earth and Moon is 384,400 km.

Furthermore, G has a value of 6.67 x 10^-11 Nm^2/kg^2.

Using the formula: F = (Gm1m2)/r^2

we get: F = (6.67 x 10^-11 Nm^2/kg^2)(5.97 x 10^24 kg)(7.34 x 10^22 kg)/(384,400,000 m)^2

= 1.99 x 10^20 N

The magnitude of the gravitational force of Earth on the Moon is about 1.99 x 10^20 N.

Again, due to Newton's third law, the magnitude of the gravitational force of the Moon on Earth is also 1.99 x 10^20 N.

Therefore, this is our final answer.

To learn more about gravitational visit;

https://brainly.com/question/3009841

#SPJ11

Answer:

A scientific law is true anywhere and has been extensively demonstrated in the lab.

Explanation:

if you have only 1/16 of the original amount of a radioactive substance with a half-life of 7,500 years, approximately 30,000 years would have passed.

To determine how many years would have passed if you have only 1/16 of the original amount of a radioactive substance with a half-life of 7,500 years, we can use the concept of half-life decay.

Each half-life represents the time it takes for the quantity of the radioactive substance to reduce by half. In this case, the half-life is 7,500 years.

If you have 1/16 of the original amount, it means the quantity has undergone four half-life decays because 1/16 is equal to (1/2)^(4).

To find the number of years that have passed, we multiply the half-life by the number of half-life decays:

Years passed = 7,500 years * 4 = 30,000 years

Therefore, if you have only 1/16 of the original amount of a radioactive substance with a half-life of 7,500 years, approximately 30,000 years would have passed.

To learn more about half-life visit: https://brainly.com/question/1160651

#SPJ11

desoler je n'ai pas la reponse a tas question

Radiation emitted from X-rays and gamma rays are most alike. Both of these forms of radiation are electromagnetic radiation that are emitted from the nucleus of atoms.

What is radiation?

Radiation refers to the emission of energy in the form of particles or waves. Electromagnetic radiation, which includes visible light, X-rays, and gamma rays, is the most common form of radiation. In addition, radiation can take the form of particles like alpha particles, beta particles, and neutrons. Radiation from X-rays and gamma rays: X-rays and gamma rays are both forms of electromagnetic radiation. Gamma rays are the most powerful form of electromagnetic radiation and can cause considerable damage to cells and tissues. X-rays, on the other hand, are less powerful than gamma rays but still capable of causing damage to cells and tissues. X-rays and gamma rays can penetrate most materials, making them useful for medical imaging and radiation therapy. They can also cause ionization, which occurs when an atom loses or gains electrons. This can cause damage to DNA and other cellular components, leading to cell death or the development of cancer. Radiation safety measures should be taken when handling X-rays and gamma rays to minimize exposure to harmful radiation.

to know more about radiation visit:

https://brainly.com/question/31106159

#SPJ11

The spacing between crystal planes is 2.78 × 10⁻¹⁰ m. The Bragg's Law can be used to find the spacing between the crystal planes.

Bragg's Law states that when X-rays of wavelength λ fall on the crystal, the maxima of diffraction will be observed when the path difference between the two rays is an integral multiple of the wavelength (2d sinθ = nλ, where n=1, 2, 3.....).Where d is the spacing between the crystal planes θ is the angle between the incident X-rays and the crystal planes

The maximum diffraction was recorded at 21.9°, thus,

θ = 21.9°λ

= 9.74×10⁻² nm

= 9.74×10⁻¹¹ m

From Bragg's law: 2d sinθ

= nλ2d

= nλ/sinθ

Substitute the values in the equation, we have:

2d = (1)(9.74 × 10⁻¹¹)/sin(21.9°)d

= (9.74 × 10⁻¹¹)/(2 × sin(21.9°))d

= 2.78 × 10⁻¹⁰ m

This is the spacing between the crystal planes.

The spacing between crystal planes is 2.78 × 10⁻¹⁰ m.

To know more about Bragg's Law, refer

https://brainly.com/question/29855408

#SPJ11

A wheel with radius 0.0600 m rotates about a horizontal friction less axle at its center. The moment of inertia of the wheel about the axle is 2.50 kg. m². The wheel is initially at rest. Then at t = 0 a force F(t)= (3.00 N/s)t is applied tangentially to the wheel and the wheel starts to rotate. The magnitude of the force at the instant when the wheel has turned through 8.00 revolutions is 12.0 N.

The angular displacement of the wheel is given by

θ = 8.00 rev = 8.00 * 2π rad

The angular velocity of the wheel is given by

ω = dθ/dt = (8.00 * 2π rad) / t

The torque on the wheel is given by

τ = F * r = F * 0.0600 m

The moment of inertia of the wheel is given by

I = 2.50 kg * m²

The equation for the torque is

τ = I * α

where α is the angular acceleration.

Substituting the known values into the equation for the torque, we get

F * 0.0600 m = 2.50 kg * m² * α

F = 2.50 kg * m² * α / 0.0600 m

F = 41.67 α N

The angular acceleration is given by

α = ω/t

Substituting the known values into the equation for the angular acceleration, we get

α = (8.00 * 2π rad) / t

α = 16π rad/s

Substituting the known value of the angular acceleration into the equation for the force, we get

F = 41.67 α N

F = 41.67 * 16π rad/s N

F = 12.0 N

Therefore, the magnitude of the force at the instant when the wheel has turned through 8.00 revolutions is 12.0 N.

To learn more about moment of inertia visit: https://brainly.com/question/14460640

#SPJ11