In the bohr model, what happens when an electron makes a transition between orbits?.

Answer:

air is a solution because it is homogeneous, uniform throughout,and doesn't scatter light

Answer:1.8

Explanation:

=nrt/v

P=(3.15)(.0821)(472)/67

P=1.82atm

In order to produce the impact of future droughts that may occur in the area, the scientist's plan would most likely include several key elements.

First and foremost, the plan would likely involve extensive research and data analysis to better understand the climate patterns and environmental factors that contribute to drought in the region.

This could involve collecting and analyzing data on rainfall, temperature, humidity, and other key indicators, as well as examining the impact of human activity on the local ecosystem.

Based on this research, the scientist may develop a range of strategies aimed at mitigating the effects of drought, such as water conservation measures, alternative irrigation techniques, and improved crop management practices.

Additionally, the plan may involve community outreach and education initiatives to raise awareness about the importance of water conservation and sustainable resource management.

Overall, the scientist's plan would likely be a comprehensive and multi-faceted approach aimed at preparing the city for future droughts and promoting long-term resilience and sustainability.

To know more about droughts refer here: https://brainly.com/question/26693108#

#SPJ11

The pH of the solution is 1.77 which, contains 1.44% formic acid by mass.

The first step is to determine the molarity of the solution, which can be done using the percent composition by mass and the density of the solution;

mass of formic acid = 1.44% × 100 g = 1.44 g

volume of solution = 1.44 g ÷ 1.01 g/mL

= 1.43 mL

= 0.00143 L

molarity of formic acid=moles of formic acid ÷ volume of solution

moles of formic acid = mass ÷ molar mass = 1.44 g ÷ 46.03 g/mol

= 0.0313 mol

molarity of formic acid = 0.0313 mol ÷ 0.00143 L

= 21.9 M

Next, we can use the expression for the acid dissociation constant of formic acid to determine the pH;

Ka = [H⁺][HCOO⁻] / [HCOOH]

Let x be the concentration of [H⁺] and [HCOO⁻] at equilibrium. Then, the concentration of [HCOOH] at equilibrium is 0.047 - x.

Substituting these expressions into the Ka expression and solving for x, we get;

6.2 × 10⁻⁴ = x² / (0.047 - x)

Solving for x using quadratic formula, we get;

x = 0.017 M

Therefore, the pH of the solution is;

pH = -log[H⁺] = -log(0.017)

= 1.77

To know more about formic acid here

https://brainly.com/question/13016575

#SPJ4

The term that describes a pure substance that is composed of only one type of atom is an element.

An element is a substance that cannot be broken down into simpler substances by chemical reactions. Each element has a unique number of protons in the nucleus of its atoms, which gives it a specific atomic number. For example, the element carbon has an atomic number of 6, meaning that each carbon atom has 6 protons in its nucleus.

Elements are the building blocks of all matter, and there are currently 118 known elements, ranging from hydrogen (which has an atomic number of 1) to oganesson (which has an atomic number of 118). Elements can exist in various states of matter, including solids, liquids, and gases, depending on their temperature and pressure.

Pure substances, like elements, have uniform properties and composition throughout. This means that every particle of an element has the same chemical and physical properties, such as its melting point, boiling point, and density. In contrast, a mixture is composed of two or more substances that are physically combined but not chemically bonded.

Mixtures can be separated into their component parts by physical means, while pure substances cannot.

In summary, an element is a pure substance that is composed of only one type of atom. It cannot be broken down into simpler substances by chemical reactions and has uniform properties and composition throughout.

To know more about element, visit:

https://brainly.com/question/13025901#

#SPJ11

By making a simple division of the Molar concentrations. The correct option is a.

The equilibrium constant Kc is a measure of the equilibrium between the forward and reverse reactions of a chemical reaction. It is a ratio of the concentrations of the products to the concentrations of the reactants at equilibrium.

The equilibrium constant Kc:

Kc = [products]/[reactants]

here [products] is the concentration of the products at equilibrium and [reactants] is the concentration of the reactants at equilibrium.

If the concentrations of the products and reactants are given in molar concentrations (M), we can express the equilibrium constant as a ratio of Molar concentrations using the following equation:

Kc = [products]M / [reactants]M

Therefore, to find the equilibrium constant Kc, we simply need to divide the Molar concentrations of the products and reactants by their respective coefficients.

Therefore, the correct option is a) by making a simple division of the Molar concentrations.  

Learn more about Molar concentrations Visit: brainly.com/question/26255204

#SPJ4

Correct Question:

The equilibrium constant Kc is found:

a) by making a simple division of the Molar concentrations

b) with the quotient of the speed of the products over the reactants

c) dividing the speeds of the equations that form the chemical reaction

d) with the quotient of the concentrations of the substances present in the equation​

The reaction is a double displacement reaction, in which two ions switch places in the reactants to form the products. The chemical equation for the reaction between Na2CO3 (aq) and NaCl2 (aq) is as follows:

2 Na2CO3 (aq) + NaCl2 (aq) → 2 NaCl (aq) + CO2 (g) + H2O (l).

In this reaction, sodium carbonate (Na2CO3) reacts with sodium chloride (NaCl2) to form sodium chloride (NaCl), carbon dioxide (CO2) and water (H2O). The reaction is a double displacement reaction, in which two ions switch places in the reactants to form the products. The sodium ions in the Na2CO3 react with the chloride ions in the NaCl2 to form the NaCl, while the carbonate ions in the Na2CO3 react with the sodium ions in the NaCl2 to form CO2 and H2O.

The reaction does not form a precipitate, so no solid product is formed. This is because both the reactants and products are soluble in water, and so no solid product is formed.

Overall, this reaction between Na2CO3 and NaCl2 results in the formation of NaCl, CO2 and H2O, and no solid precipitate is formed. This is because both the reactants and products are soluble in water, and so no solid product is formed.

Know more about chemical equation here

https://brainly.com/question/28792948#

#SPJ11

The mass of the silver sample is approximately 77.9 grams.

To solve this problem, we can utilize the equation for heat transfer:

q = m * c * ΔT

where q represents the heat transferred, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

Initially, we calculate the heat transferred from the silver to the water:

q silver = m silver * c silver * ΔT silver

q water = m water * c water * ΔT water

For thermal equilibrium between the silver and water, we equate the two equations as they reach the same temperature:

q silver = q water

m silver * c silver * ΔT silver = m water * c water * ΔT water

Rearranging the equation allows us to solve for the mass of the silver:

m silver = (m water * c water * ΔT water) / (c silver * ΔT silver)

Substituting the given values:

m silver = (250g * 4.184 J/g°C * (23.35°C - 6.5°C)) / (0.235 J/g°C * (98.75°C - 23.35°C))

As a result:

m silver = 77.9 g

Thus, the mass of the silver sample is approximately 77.9 grams.

Know more about Calorimeter here:

https://brainly.com/question/4802333

#SPJ11

The molarity of the solution is 0.5 M.

To calculate the molarity of the solution, we need to first calculate the number of moles of NaF present in the solution. The molar mass of NaF is 41.99 g/mol (22.99 g/mol for Na and 19.00 g/mol for F).

Number of moles of NaF = mass of NaF / molar mass of NaF

= 15.1 g / 41.99 g/mol

= 0.359 mol

The volume of the solution is given as 550.0 mL, which needs to be converted to liters (L) as the unit of molarity is moles/L.

Volume of the solution = 550.0 mL = 0.5500 L

Molarity of the solution = number of moles of solute / volume of solution

= 0.359 mol / 0.5500 L

= 0.653 M

However, we need to consider that the NaF was diluted to a final volume of 550.0 mL, which means that the concentration of the solution has been decreased. Therefore, we need to divide the calculated molarity by 2.

Molarity of the solution after dilution = 0.653 M / 2

= 0.5 M

To know more about molarity, refer here:

https://brainly.com/question/30404105#

#SPJ11

Both mass and charge are conserved. Therefore, option (3) is correct.

Fe(s) + CuSO₄(aq) → FeSO₄(aq) + Cu(s) conserves mass and charge.

The rule of conservation of mass prohibits matter creation or destruction during chemical reactions. The reactants and products must have the same mass. The left and right sides of the reaction must have the same mass of iron (Fe) and copper sulfate (CuSO₄).

Redox processes also involve electron transfer. The law of charge conservation asserts that reactants and products must have equal charges. Iron loses electrons to generate Fe²⁺ ions, while copper ions receive electrons to form copper metal (Cu). The reaction is neutral.

Learn more about redox reaction, here:

https://brainly.com/question/28300253

#SPJ12

The landform that is a result of the chemical weathering of carbonate rock is

While the chemical weathering of carbonate rock does occur, it can result in voids or cavities under the surface. When sedimentary layers become unstable and unable to support their own weight, a concave impression known as a sinkhole will form.

Sinkholes are prevalent in areas that have an ample supply of carbonate rock, which itself poses a danger due to its potential impact on infrastructure and human well-being. It is important to note that the chemical deterioration of carbonate rock does not typically contribute to natural developments like mountains, dunes, or rivers.

Learn more about Sinkholes at

https://brainly.com/question/1856979

#SPJ1

The name of this compound using IUPAC rules is  3,4-dimethylhexane.

Option D is correct.

the IUPAC nomenclature of organic chemistry is described as a method of naming organic chemical compounds as recommended by the International Union of Pure and Applied Chemistry.

Option A, 2,3-diethylbutane, is incorrect because it has a different carbon chain length and different substituent positions.

Option B, 2-ethyl-3-methylpentane, is incorrect because it has a different carbon chain length and one of the substituents is incorrectly placed.

Option C, 3-methyl-4-ethylpentane, is incorrect because it has a different carbon chain length and the substituent positions are reversed.

Learn more about  IUPAC rules at: https://brainly.com/question/28872356

#SPJ1

NAD+ is the most common electron carrier needed for both glycolysis and the citric acid cycle. It is a coenzyme and is involved in redox reactions.

It is an oxidized form of NADH, which is the reduced form. During the oxidation of organic molecules, NAD+ will accept electrons and become NADH. During the reduction of organic molecules, NADH will give electrons and become NAD+.

During glycolysis, NAD+ is used to accept electrons from the oxidation of glucose, creating NADH and releasing energy for the ATP production. During the citric acid cycle, NAD+ accepts electrons from the oxidation of acetyl CoA, creating NADH and releasing energy for the ATP production. The NADH produced in both glycolysis and the citric acid cycle can be used in the electron transport chain to produce ATP.

In summary, NAD+ is an oxidized form of NADH and it is essential in both glycolysis and the citric acid cycle to produce energy in the form of ATP.

Know more about Citric acid cycle here

https://brainly.com/question/29857075#

#SPJ11

Answer and explanation:

Based on the temperature change, we can conclude that the reaction of baking soda and vinegar is exothermic. In an exothermic reaction, energy is released from the system to the surroundings in the form of heat, which causes an increase in the temperature of the surroundings.

In this case, the system consists of the baking soda and vinegar, which react to form carbon dioxide gas, water, and sodium acetate. As the reaction proceeds, energy is released from the system to the surroundings in the form of heat. This heat causes an increase in the temperature of the surroundings, which in this case is the surrounding air and any objects in the vicinity of the reaction.

The decrease in temperature from 25˚C to 19˚C indicates that the reaction released energy to the surroundings, and this energy was absorbed by the air and objects in the vicinity of the reaction. This is why the temperature of the surroundings decreases.

Overall, an exothermic reaction like this involves the conversion of potential energy stored in the reactants into kinetic energy in the form of heat, which is released to the surroundings.

The pH after the addition of 19.0 ml of 0.500 M HNO₃ to a 75.0 ml volume of 0.200 M NH₃ (Kb = 1.8 * 10⁻⁵) is 9.11.

1. Calculate moles of NH₃ and HNO₃: moles NH₃ = 75.0 ml * 0.200 mol/L = 15.0 mmol, moles HNO₃ = 19.0 ml * 0.500 mol/L = 9.5 mmol

2. Find moles of NH₃ remaining: 15.0 mmol - 9.5 mmol = 5.5 mmol

3. Calculate new concentrations: [NH₃] = 5.5 mmol / (75.0 ml + 19.0 ml) = 0.055 mol/L, [NH₄⁺] = 9.5 mmol / (75.0 ml + 19.0 ml) = 0.095 mol/L

4. Apply the Henderson-Hasselbalch equation: pH = pKa + log([NH₃]/[NH₄⁺])

5. Find pKa from Kb: pKa = 14 - log(Kb) = 14 - log(1.8 * 10⁻⁵) = 9.74

6. Calculate pH: pH = 9.74 + log(0.055/0.095) = 9.11

To know more about Henderson-Hasselbalch equation click on below link:

https://brainly.com/question/13423434#

#SPJ11

Yes, Cayden will succeed in making curd. We would follow the same procedure to make the curd.

When a spoonful of old curd is added to warm milk, the bacteria present in the curd starts to multiply in the milk. These bacteria convert the lactose (milk sugar) present in the milk into lactic acid, which causes the milk to thicken and form curd. The process of curd formation is called curdling.

When the curdled milk is kept in a fridge, the low temperature inhibits the growth of bacteria, and the curd sets. This is because the lactic acid formed by bacteria during the curdling process makes the milk protein molecules coagulate and form a solid mass.

Therefore, Cayden's procedure of adding a spoonful of old curd to warm milk and keeping it in the fridge is an effective way to make curd.

To know more about bacteria, refer here:

https://brainly.com/question/2501232#

#SPJ11

If the unknown solution reacts with potassium carbonate to form a white precipitate, then it contains strontium ions, indicating that the unknown solution is strontium nitrate.

On the other hand, if the unknown solution reacts with potassium sulfate to form a white precipitate, then it contains magnesium ions, indicating that the unknown solution is magnesium nitrate.

Therefore, based on the observations, if a white precipitate is observed when the unknown solution is mixed with potassium carbonate and no precipitate is observed when the unknown solution is mixed with potassium sulfate, the unknown solution is most likely strontium nitrate.

If no precipitate is observed when the unknown solution is mixed with both potassium carbonate and potassium sulfate, the unknown solution is most likely magnesium nitrate.

Therefore, we can determine the identity of the unknown solution by observing the reaction with potassium carbonate and potassium sulfate.

For more question on carbonate

https://brainly.com/question/30594488

#SPJ11

The equilibrium concentration of Ag⁺ in the solution is 0.00200 M.

To solve this problem, we can use the equation for the reaction between silver nitrate (AgNO₃) and sodium iodate (NaIO₃), which is:

AgNO₃ + NaIO₃ -> AgIO₃ + NaNO₃

We know the initial concentrations of the two solutions: 0.00200 M for the AgNO₃ and 0.01 M for the NaIO₃. When they are mixed together, they will react to form a new equilibrium concentration of silver ions (Ag⁺).

To find the equilibrium concentration of Ag⁺, we need to use the stoichiometry of the reaction and the equilibrium constant (K) for the reaction. The balanced equation tells us that one mole of AgNO₃ reacts with one mole of NaIO₃ to form one mole of AgIO₃. Therefore, at equilibrium, the concentration of Ag⁺ will be equal to the initial concentration of AgNO₃ minus the amount that reacted to form AgIO₃:

[Ag⁺] = [AgNO₃] - [AgIO₃]

We can use the equilibrium constant expression for the reaction to find the concentration of AgIO₃:

K = [AgIO₃]/([AgNO₃][NaIO₃])

At equilibrium, this expression will equal the equilibrium constant for the reaction, which is given as 1.8 x 10^-12. We can rearrange this expression to solve for [AgIO₃]:

[AgIO₃] = K[AgNO₃][NaIO₃]

Substituting the initial concentrations and the value of K, we get:

[AgIO₃] = (1.8 x 10^-12)(0.00200 M)(0.01 M) = 3.6 x 10^-17 M

Now we can plug this value into the equation for [Ag⁺] to find the equilibrium concentration of silver ions:

[Ag⁺] = [AgNO₃] - [AgIO₃] = 0.00200 M - 3.6 x 10^-17 M = 0.00200 M (to three significant figures)

Learn more about equilibrium concentration at https://brainly.com/question/10838453

#SPJ11

The student incorrectly calculated the mass of the sample of pyrite by assuming the density of pyrite to be 2 g/cm³, which is actually the density of water. The actual density of pyrite is about 5 g/cm³, so the actual mass of the 10 cm³ sample would be 50 g.

The student likely confused the concept of density, which is the mass per unit volume of a substance, with the specific gravity, which is the ratio of the density of a substance to the density of water.

Pyrite has a specific gravity of about 5, meaning that its density is about 5 times greater than that of water. Therefore, the mass of a 10 cm³ sample of pyrite would be 5 times greater than the mass of a 10 cm³ sample of water, or 50 g.

To learn more about Pyrite, here

https://brainly.com/question/13435246

#SPJ4

Add approximately 10.9 grams of pentanol to 250 mL of water to make a 5% solution by volume.

To make a 5% solution by volume with pentanol and water, you'll need to determine the volume of pentanol to be added to the 250 mL of water.

First, find the total volume of the solution:

Total volume = (Volume of pentanol + 250 mL) * 100

Next, calculate the volume of pentanol needed for a 5% solution:

Volume of pentanol = (5% * Total volume) / 100

Since the desired solution is 5% pentanol by volume:

5% * (Volume of pentanol + 250 mL) = Volume of pentanol
0.05 * (Volume of pentanol + 250) = Volume of pentanol

Now, solve for the volume of pentanol:

0.05 * Volume of pentanol + 12.5 = Volume of pentanol
-0.05 * Volume of pentanol = -12.5
Volume of pentanol = 13.16 mL (rounded to 3 significant figures)

Now, use the density of pentanol to find the mass of pentanol to be added:

Mass of pentanol = Volume of pentanol * Density of pentanol
Mass of pentanol = 13.16 mL * 0.825 g/mL
Mass of pentanol ≈ 10.9 g (rounded to 3 significant figures)

Therefore, you should add approximately 10.9 grams of pentanol to 250 mL of water to make a 5% solution by volume.

To know more about Volume-Density Calculations:
https://brainly.com/question/1354972

#SPJ11

The volume of the gas at 561.06 K and 70.3 atm will be 168.08 L.

The initial conditions of the gas are given as P₁ = 15.17 atm, V₁ = 641.68 L, and T₁ = 243.41 K. To find the volume of the gas at the new conditions, we can use the combined gas law:

(P₁V₁)/T₁ = (P₂V₂)/T₂

where P₂, V₂, and T₂ are the new pressure, volume, and temperature, respectively.

We can rearrange the equation to solve for V₂:

V₂ = (P₂/P₁) x (T₁/T₂) x V₁

Substituting the given values:

V₂ = (70.3/15.17) x (243.41/561.06) x 641.68

V₂ = 168.08 L

To know more about combined gas law, refer here:

https://brainly.com/question/30458409#

#SPJ11

The mass in micrograms of 5. 00 scruples approximately 149,166.67 µg.

The known values are: 1 scruple = 20 grains, 1 ounce = 480 grains, and 1 oz = 28.34 g.

To find the mass of 5.00 scruples, first convert scruples to grains by multiplying by 20, then convert grains to ounces by dividing by 480, and finally convert ounces to grams by multiplying by 28.34.

The calculation is as follows:

5.00 scruples x 20 grains/scruple x 1 ounce/480 grains x 28.34 g/1 oz x 1,000,000 µg/1 g = 149,166.67 µg

Therefore, the mass of 5.00 scruples is 149,166.67 µg.

To know more about the micrograms refer here :

https://brainly.com/question/13264213#

#SPJ11

The Arrhenius equation describes the relationship between the rate constant (k) of a chemical reaction and the temperature (T) at which the reaction occurs. The equation is given as:

k = Ae^(-Ea/RT)

where A is the pre-exponential factor or frequency factor, Ea is the activation energy required for the reaction to occur, R is the gas constant, and e is the base of the natural logarithm.

The Arrhenius equation indicates that as the temperature of a chemical reaction increases, the rate constant also increases exponentially.

The activation energy term (Ea) represents the minimum energy required for reactants to form products, and the pre-exponential factor (A) represents the frequency of successful collisions between reactant molecules.

This equation is commonly used in the study of chemical kinetics, which is the study of the rates of chemical reactions and the factors that affect them.

to know more about Arrhenius equation refer here:

https://brainly.com/question/30514582#

#SPJ11

We need a volume of 60.4 ml of 11.7 M HCl to make a 500.0 ml solution with a pH of 3.20.

To calculate the required volume of 11.7 M HCl to make a 500.0 ml solution with a pH of 3.20, we need to use the Henderson-Hasselbalch equation, which relates the pH of a solution to its pKa and the ratio of the concentrations of the conjugate base and acid.

Using the Henderson-Hasselbalch equation:

pH = pKa + log([A⁻] ÷ [HA])

where [A-] / [HA] is the ratio of the concentration of the conjugate base (Cl⁻) to the concentration of the acid (H⁺).

Rearranging the equation, we can solve for [H⁺]:

[H⁺] = [tex]10^{(pH - pKa)}[/tex]

[H⁺] = [tex]10^{(3.20 - (-1))}[/tex]

= [tex]10^{-3.20} + mol/L[/tex]

Since the concentration of HCl is equal to the concentration of [H⁺] in solution, we can calculate the moles of HCl required to make the solution:

moles of HCl = concentration of HCl × volume of solution

moles of HCl = [tex](10^{-3.20})[/tex] × (0.5 L)

= 7.08 × 10⁻⁴ mol

Finally, we can calculate the required volume of 11.7 M HCl:

volume of HCl = moles of HCl ÷ concentration of HCl

volume of HCl = (7.08 × 10⁻⁴ mol) ÷ (11.7 mol/L)

= 0.0604 L

= 60.4 ml

To learn more about solution follow the link:

brainly.com/question/1416865

#SPJ4

Answer:

One of two or more versions of a genetic sequence at a particular region of a chromosome.

The name of this branched alkene is 6- ethyl-8-methyl-5-propylnon-2-ene.

The longest carbon chain containing the carbon-carbon double bond is selected as the parent alkene.

The suffix ‘ane’ of the alkane is replaced by ‘ene’.

The position of double bonds or side chains indicated by numbers 1, 2, 3 etc.

The longest chain is numbered from that end, which gives the lowest number to the carbon atom of the double bond and written just before the suffix ‘ene’. If while numbering the chain the double bond gets the same number from either side the carbon chain is numbered in such a manner that the substituent gets the lowest number.

The name and position of other groups (substituents) is indicated by prefixes.

Learn more about Alkenes, here:

https://brainly.com/question/31033378

#SPJ1

The best classification for the creation of a complex ion like Cu(NH3)4 2+ (aq) is a Lewis acid-base reaction. The NH3 molecules serve as Lewis bases in this process, while the Cu2+ ion functions as a Lewis acid by accepting a pair of electrons from them. As a result, a coordination complex is created that contains four NH3 ligands and a Cu2+ ion.

Covalent coordinate bonds are created when the NH3 molecules give the Cu2+ ion a pair of electrons from their lone pairs. As a result, a stable complex ion with a net charge of 2+ is created, with the Cu2+ ion at its centre and four NH3 ligands surrounding it.

Overall, the formation of complex ions involves the interaction of a Lewis acid (metal ion) and a Lewis base (ligand), resulting in the formation of a coordinate covalent bond.

For more questions on:  molecules

https://brainly.com/question/22312099

#SPJ11  

The formation of a complex ion such as Cu(NH3)4 2+ (aq) can be best categorized as a coordination complex.

For such more question on complex ion

https://brainly.com/question/24262383

#SPJ11

True, variations can be subtle or extreme.

The degree of variation depends on the context and the nature of the subject being examined. Some variations may be slight and difficult to detect, while others may be extreme and easily identifiable. Regardless of the extent of the variation, it is an essential concept that allows for diversity and creativity in various fields.

This is because variations refer to differences or changes in something. For instance, in genetics, variations can range from small changes in the genetic code to large-scale mutations that alter the entire genetic sequence. Similarly, in language, variations can be subtle, such as different pronunciations or word usage, or extreme, such as different languages altogether.

In other areas such as art, variations can also be subtle or extreme. For example, an artist may create variations of a painting by changing the color scheme, brushstrokes, or composition, resulting in subtle differences. Alternatively, an artist may create an extreme variation by creating a completely different piece that only shares a few similarities with the original.

For more such questions on variations

https://brainly.com/question/20126690

#SPJ11

The mass (in grams) of sodium carbonate, Na₂CO₃ needed to react completely with 25 mL of vinegar is 1.17 grams

First, we shall obtain the mole in 25 mL of vinegar, HC₂H₃O₂

Mole = molarity × volume

Mole of HC₂H₃O₂ = 0.875 × 0.025

Mole of HC₂H₃O₂ = 0.022 mole

Next, we shall determine the mole of sodium carbonate, Na₂CO₃ that react. Details below:

Na₂CO₃ + 2HC₂H₃O₂ -> 2NaC₂H₃O₂ + CO₂ + H₂O

From the balanced equation above,

2 moles of HC₂H₃O₂ reacted with 1 mole of Na₂CO₃

Therefore,

0.022 mole of HC₂H₃O₂ will react with = 0.022 / 2 = 0.011 mole of Na₂CO₃

Finally, we shall determine the mass of Na₂CO₃ needed. Details below:

Mass = Mole × molar mass

Mass of Na₂CO₃ = 0.011 × 106

Mass of Na₂CO₃ = 1.17 grams

Learn more about mass:

https://brainly.com/question/21940152

#SPJ1

Answer:

388.88 mmHg (2 d.p.)

Explanation:

To find the final pressure when the volume is kept constant, we can use Gay-Lussac's law.

[tex]\boxed{\sf \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}}[/tex]

where:

The values to substitute into the equation are:

Substitute the values into the equation and solve for P₂:

[tex]\implies \sf \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}[/tex]

[tex]\implies \sf \dfrac{745}{523 }=\dfrac{P_2}{273}[/tex]

[tex]\implies \sf P_2=\dfrac{745 \cdot 273}{523 }[/tex]

[tex]\implies \sf P_2=\dfrac{203385}{523 }[/tex]

[tex]\implies \sf P_2=388.88145315...[/tex]

[tex]\implies \sf P_2=388.88\;mmHg\;(2\;d.p.)[/tex]

Therefore, the final pressure would be 388.88 mmHg if a gas is cooled from 523 K to 273 K and the volume is kept constant, starting with an initial pressure of 745 mmHg.