In parallelogram best, diagonals bs and et bisect each other at o.
1. if es = 10cm, how long is bt?
2. if be = 13cm, how long is ts?
3. if eo = 6cm and so = 7cm, what is the length of et? bs?
4. if et + bs = 18cm and so = 5cm, find et and bs.

Mary's average monthly expense for housing is $2,129.93.

We need to add up all her annual housing expenses and divide the total by 12 (the number of months in a year):

Total annual housing expenses = mortgage payments + real estate taxes + annual insurance premium + maintenance + utilities

Total annual housing expenses = $14,169.20 + $3,960.00 + $840.00 + $1,410.00 + $5,180.00

Total annual housing expenses = $25,559.20

Average monthly expense = Total annual housing expenses ÷ 12

Average monthly expense = $25,559.20 ÷ 12

Average monthly expense = $2,129.93

Therefore, Mary's average monthly expense for housing is $2,129.93.

Learn more about divide here : brainly.com/question/30190025

#SPJ1

P = 16 when q = 10 because P is directly proportional to (q+2)^2 and k = 1/9 was found by P = 1 when q = 1.

If P is directly proportional to (q+2)^2, we can write this as:

P = k(q+2[tex])^2[/tex]

where k is a constant of proportionality.

To find the value of k, we can use the given condition that when q = 1, P = 1:

1 = k(1+2[tex])^2[/tex]

1 = k(3[tex])^2[/tex]

1 = 9k

k = 1/9

Now we can use this value of k to find P when q = 10:

P = (1/9)(10+2[tex])^2[/tex]

P = (1/9)(12[tex])^2[/tex]

P = (1/9)(144)

P = 16

The reason for this answer is based on the given information that P is directly proportional to (q+2[tex])^2[/tex]. Using the proportionality constant k, which was determined by the condition that P = 1 when q = 1.

Learn more about proportional

brainly.com/question/30657439

#SPJ11

The capacity of 1 thumb drive is 4 gigabytes and the capacity of 1 compact disk is 2 gigabytes.

The first step is to form the system of equations that represent the information in the question:

4x + y = 18 equation 1

4x + 3y = 22 equation 2

The elimination method would be used to determined the required values.

Subtract equation 1 from equation 2

2y = 4

y = 4/2

y = 2

Substitute for y in equation 1: 4x + 2 = 18

4x = 18 - 2

4x = 16

x = 16/4

x = 4

To learn more about simultaneous equations, please check: brainly.com/question/25875552

#SPJ1

To find the maximum concentration of an antibiotic between hours 1 and 7, first find the critical points of the function C(t), then evaluate C(t) at the critical points and endpoints to choose the highest value.

To determine the maximum concentration of the antibiotic between hours 1 and 7, follow these steps:
1. Find the critical points of the function C(t) = 4te^(-397). To do this, find the first derivative of the function, C'(t), and set it equal to 0.
2. Check the value of C(t) at the critical points and the endpoints of the interval, t=1 and t=7.
3. Choose the highest value of C(t) among the critical points and the endpoints.
1: Find the first derivative, C'(t).
C(t) = 4te^(-397)
C'(t) = 4e^(-397)(1-397t)
2: Set the first derivative equal to 0 and solve for t.
4e^(-397)(1-397t) = 0
1 - 397t = 0
t = 1/397
3: Evaluate C(t) at the critical point t = 1/397 and the interval endpoints t = 1 and t = 7.
C(1/397) = 4(1/397)e^(-397(1/397)) ≈ 0.01 ag/mg
C(1) = 4(1)e^(-397(1)) ≈ 0.00 ag/mg
C(7) = 4(7)e^(-397(7)) ≈ 0.00 ag/mg
The maximum concentration of the antibiotic occurs at t = 1/397 hours, with a concentration of approximately 0.01 ag/mg. What is Titration: Titration is a technique by which we know the concentration of unknown solution using titration of this solution with solution whose concentration is known.

Learn More About Concentration: https://brainly.com/question/19567253

#SPJ11

The size of the population of 100 individuals which are undergoing exponential growth is equal to 400.

Population is undergoing exponential growth,

Use the formula of exponential ,

Nt = N0 × e^(rt)

Where,

Nt is the population size at time t

N0 is the initial population size

e is the mathematical constant, approximately 2.71828

r is the growth rate

If the population doubling time is 1 year,

Use the following formula to calculate the growth rate,

r = log(2) / t

Where t is the doubling time,

log(2) is the natural logarithm of 2 = approximately 0.693.

⇒ r = log(2) / 1 year

     = 0.693 / year

Plug in the values,

Nt = N0 × e^(rt)

⇒Nt = 100 × e^(0.693 × 2)

Population size in 't' = 2 years.

Nt = 100 × e^1.386

⇒Nt = 100 × 3.998

⇒Nt = 100 ×4.000

⇒ Nt = 400

Therefore, the population will be 400 individuals in 2 years if it continues to undergo exponential growth with a population doubling time of 1 year.

Learn more about exponential here

brainly.com/question/31295441

#SPJ4

The cone will hold approximately 198 cubic inches of water. The correct answer is option B.

To find how much water a cone with a diameter of 6 inches and a height of 21 inches will hold, we need to calculate the volume of the cone. We can use the formula for the volume of a cone: V = (1/3)πr^2h, where V is the volume, r is the radius, and h is the height.

1. Since the diameter is 6 inches, the radius (r) is half of that: r = 6/2 = 3 inches.

2. The height (h) is given as 21 inches.

3. Use 3.14 for π.

Now, plug the values into the formula:

V = (1/3) * 3.14 * (3^2) * 21

4. Calculate the square of the radius: 3^2 = 9

5. Multiply the values: (1/3) * 3.14 * 9 * 21 ≈ 197.64

6. Round the answer to the nearest whole number: 198 cubic inches.

To learn more about volume

https://brainly.com/question/27710307

#SPJ11

To approximate the change in z = f(x, y) as x changes from −1 to −0.93 and y changes from 2 to 1.94, we can use the differential dz.

First, we need to find the partial derivatives of f with respect to x and y:

∂f/∂x = -10/x³(y²)
∂f/∂y = -10(x²)/y³

Then, we can use the following formula:

dz ≈ ∂f/∂x * Δx + ∂f/∂y * Δy

where Δx and Δy are the changes in x and y, respectively.

Substituting in the given values, we have:

Δx = -0.93 - (-1) = 0.07
Δy = 1.94 - 2 = -0.06

Using the partial derivatives we calculated earlier, we get:

dz ≈ (-10/-1.037³(2²)) * 0.07 + (-10((-1)²)/1.94³) * (-0.06)
dz ≈ -0.031

Therefore, the approximate change observed in z as x changes from −1 to −0.93 and y changes from 2 to 1.94 is -0.031.
To approximate the change in z using the differential dz, we first need to find the partial derivatives of z with respect to x and y. Given z = f(x, y) = 5/(x² + y²):

∂z/∂x = -10x/(x² + y²)²
∂z/∂y = -10y/(x² + y²)²

Now, we need to find the differential dz:

dz = (∂z/∂x)dx + (∂z/∂y)dy

Since x changes from -1 to -0.93, dx = -0.93 - (-1) = 0.07. Similarly, y changes from 2 to 1.94, so dy = 1.94 - 2 = -0.06.

Now, plug in the initial values of x and y (-1, 2):

∂z/∂x = -10(-1)/((-1)² + 2²)² = -10/25
∂z/∂y = -10(2)/((-1)² + 2²)² = -40/25

Now, plug in dx and dy into the dz equation:

dz = (-10/25)(0.07) + (-40/25)(-0.06) = 0.28 - 0.096 = 0.184

So, the approximate change in z when x changes from -1 to -0.93 and y changes from 2 to 1.94 is 0.184.

Visit here to learn more about differential brainly.com/question/31239084

#SPJ11

Hence, [tex]\frac{-1-3}{4-(-2)}[/tex]  is the required fraction.

We know that the slope of a line is defined as the change in y coordinate with respect to the change in x coordinate of that line.

To set up the slope formula for the line that passes through the points (-2, 3) and (4, -1), we can use the formula of the slope

i.e. [tex]m=\frac{y_2-y_1}{x_2-x_1}[/tex]

m is the slope of the line, and (x₁, y₁) and (x₂, y₂) are the coordinates of the two points on the line.

So, x₁ = -2

y₁ = 3

x₂ = 4

y₂ = -1

Substituting the values in the formula

[tex]m = \frac{-1-3}{4-(-2)}[/tex]

Hence, [tex]\frac{-1-3}{4-(-2)}[/tex]  is the required fraction.

Learn more about Slope here

brainly.com/question/31236099

#SPJ4

Therefore, the surface area of the mailer is approximately 229.3 square inches.

Total surface area refers to the sum of the areas of all the faces or surfaces of a three-dimensional object. It includes the area of all the faces including the bases, top and sides.

Here,

To find the total surface area of the mailer, we need to find the area of all the faces and then add them up.

First, let's find the area of the rectangular faces. The length of the mailer is 18 inches and the height is 4 inches, so the area of each rectangular face is:

Area of rectangle = length x height

= 18 x 4

= 72 square inches

Since there are 3 rectangular faces, the total area of the rectangular faces is:

Total area of rectangular faces = 3 x 72

= 216 square inches

Next, let's find the area of the triangular faces. The triangular side is 4.7 inches and the base is 5 inches. To find the area of a triangle, we use the formula:

Area of triangle = (1/2) x base x height

where base is the length of the triangle's base and height is the perpendicular distance from the base to the opposite vertex.

To find the height of the triangle, we can use the Pythagorean theorem since we know the length of the triangular side and the height of the mailer. The Pythagorean theorem states that:

c² = a² + b²

where c is the hypotenuse (the triangular side), and a and b are the other two sides (the height of the mailer and the height of the triangle).

Solving for b, we get:

b = √(c² - a²)

= √(4.7² - 4²)

= 2.66 inches

Now we can find the area of each triangular face:

Area of triangle = (1/2) x base x height

= (1/2) x 5 x 2.66

= 6.65 square inches

Since there are 2 triangular faces, the total area of the triangular faces is:

Total area of triangular faces = 2 x 6.65

= 13.3 square inches

Finally, we add up the areas of all the faces to get the total surface area:

Total surface area = area of rectangular faces + area of triangular faces

= 216 + 13.3

= 229.3 square inches (rounded to one decimal place)

To know more about total surface area,

https://brainly.com/question/8419462

#SPJ1

The expression 6\cdot6\cdot6\cdot6\cdot66\cdot6\cdot6\cdot6\cdot66 is equivalent to 60534416.

The given expression is:

6\cdot6\cdot6\cdot6\cdot66\cdot6\cdot6\cdot6\cdot66

To simplify this expression we can first simplify the factors that are multiples of 6:

6\cdot6\cdot6\cdot6\cdot6\cdot6\cdot6\cdot6\cdot11\cdot11

Next, we can use the commutative property of multiplication to group the factors of 6 together:

(6\cdot6\cdot6\cdot6\cdot6\cdot6)\cdot(6\cdot6\cdot6\cdot6)

Simplifying each of these groups of factors separately, we get:

46656\cdot1296

Multiplying these two numbers together, we get the final result:

60534416

Let's break down the given expression and simplify it step by step.

The expression is:

6\cdot6\cdot6\cdot6\cdot66\cdot6\cdot6\cdot6\cdot66

We can start by simplifying the factors that are multiples of 6:

6\cdot6\cdot6\cdot6\cdot6\cdot6\cdot6\cdot6\cdot11\cdot11

Next, we can use the commutative property of multiplication to group the factors of 6 together:

(6\cdot6\cdot6\cdot6\cdot6\cdot6)\cdot(6\cdot6\cdot6\cdot6)

Simplifying each of these groups of factors separately, we get:

6\cdot6\cdot6\cdot6\cdot6\cdot6 = 46656

6\cdot6\cdot6\cdot6 = 1296

Now we can substitute these values back into the expression:

46656\cdot1296

We can multiply these two numbers together to get the final result:

60534416

The given expression is:

6\cdot6\cdot6\cdot6\cdot66\cdot6\cdot6\cdot6\cdot66

To simplify this expression, we can first simplify the factors that are multiples of 6:

6\cdot6\cdot6\cdot6\cdot6\cdot6\cdot6\cdot6\cdot11\cdot11

Next, we can use the commutative property of multiplication to group the factors of 6 together:

(6\cdot6\cdot6\cdot6\cdot6\cdot6)\cdot(6\cdot6\cdot6\cdot6)

Simplifying each of these groups of factors separately, we get:

46656\cdot1296

Multiplying these two numbers together, we get the final result:

60534416

Learn more about equivalent

brainly.com/question/14672772

#SPJ11

The molarity of the solution is approximately 0.9925 M.

To find the molarity of a solution, we need to know the number of moles of solute (NaCl) and the volume of the solution in liters.

First, let's calculate the number of moles of NaCl:

Number of moles of NaCl = Mass of NaCl / Molar mass of NaCl

The molar mass of NaCl is 58.44 g/mol (sodium has a molar mass of 22.99 g/mol and chlorine has a molar mass of 35.45 g/mol).

Number of moles of NaCl = 116.0 g / 58.44 g/mol = 1.985 moles

Next, let's calculate the volume of the solution in liters:

Volume of solution = 2.00 L

Finally, let's calculate the molarity of the solution:

Molarity = Number of moles of solute / Volume of solution

Molarity = 1.985 moles / 2.00 L = 0.9925 M

Therefore, the molarity of the solution is approximately 0.9925 M.

Learn more about molarity,

https://brainly.com/question/30404105

#SPJ11

R= 1 and the interval of convergence is (-1, 1].

To find the radius of convergence, we can use the ratio test:

lim n→∞ |(-1)^n x^(n+1) Vn+5| / |(-1)^n x^n Vn+5| = lim n→∞ |x|

This limit exists for all x, and it equals 1 when |x| = 1. Therefore, the radius of convergence is R = 1.

To determine the interval of convergence, we need to check the endpoints x = -1 and x = 1 separately.

When x = -1, the series becomes:

∑ (-1)^n (Vn+5)

This is an alternating series with decreasing terms, so it converges by the alternating series test.

When x = 1, the series becomes:

∑ (-1)^n (Vn+5)

This is again an alternating series with decreasing terms, so it also converges by the alternating series test.

Therefore, the interval of convergence is (-1, 1].

For more questions like Limit click the link below:

https://brainly.com/question/12207539

#SPJ11

There are 4.097 x [tex]10^43[/tex] paths from (0,0) to (90,160) that pass through (80,70).

To calculate the number of paths from (0,0) to (90,160) while passing through (80,70), we need to break down the problem into smaller steps.

First, we can calculate the number of paths from (0,0) to (80,70) and then

multiply that by the number of paths from (80,70) to (90,160).

To go from (0,0) to (80,70), we need to take 80 steps to the right and 70 steps up, which gives us a total of 150 steps. The order in which we take these steps doesn't matter, so we can think of it as choosing 70 steps out of 150 to be up. This can be calculated using the binomial coefficient, which gives us (150 choose 70) = 2.364 x  [tex]10^43[/tex]

To go from (80,70) to (90,160), we need to take 10 steps to the right and 90 steps up, which gives us a total of 100 steps. Using the same method as above, the number of paths from (80,70) to (90,160) is (100 choose 10) = 17,310,309.

Multiplying these two values together, we get the total number of paths from (0,0) to (90,160) that pass through (80,70):

(2.364 x 10^34) x (17,310,309) = 4.097 x  [tex]10^43[/tex]

Therefore, there are 4.097 x [tex]10^43[/tex] paths from (0,0) to (90,160) that pass through (80,70).

Learn more about binomial coefficient,

https://brainly.com/question/31229700

#SPJ4

The value of the sample proportion of people from Vermont who exercised for at least 30 minutes a day 3 days a week is 0.653 or 65.3%.

The value of the sample proportion of people from Vermont who exercised for at least 30 minutes a day 3 days a week can be calculated as follows:

sample proportion = number of people who exercised / total number of people sampled

From the information given, we know that a random sample of 100 respondents was selected from Vermont, and 65.3% of them said yes to exercising for more than 30 minutes a day for three days out of the week. Therefore:

number of people who exercised in Vermont = 65.3% of 100 = 0.653 x 100 = 65.3

So the sample proportion of people from Vermont who exercised for at least 30 minutes a day 3 days a week is:

sample proportion = 65.3 / 100 = 0.653

Therefore, the value of the sample proportion of people from Vermont who exercised for at least 30 minutes a day 3 days a week is 0.653 or 65.3%.

To know more about sample proportion, refer to the link below:

https://brainly.com/question/22928496#

#SPJ11

The critical value you will use for your 98% confidence interval with a sample size of 32 is 2.33.

When finding a 98% confidence interval for a normally distributed population with a sample size of 32, you will need to use a critical value from the standard normal (z) distribution.

To find the critical value, you can refer to a z-table or use a calculator with statistical functions. For a 98% confidence interval, you will need the z-score that corresponds to the middle 98% of the data, leaving 1% in each tail. This z-score is approximately 2.33.

So, the critical value you will use for your 98% confidence interval with a sample size of 32 is 2.33.

To learn more about data, refer below:

https://brainly.com/question/10980404

#SPJ11

The derivative of s with respect to t is:

ds/dt = 10(sec² t - tan t) * (tan² t - sec² t)⁴

To find the derivative of s with respect to t, we will use the chain rule and the power rule of differentiation.

Let u = (tan² t - sec² t). Then, s = u⁵.

Using the chain rule, we have:

ds/dt = (du/dt) * (ds/du)

Now, we need to find du/dt and ds/du.

Using the chain rule again, we have:

du/dt = d/dt(tan² t - sec² t) = 2tan t * sec² t - 2sec t * tan t * sec t = 2sec² t * (tan t - sec t)

To find ds/du, we can simply apply the power rule:

ds/du = 5u⁴

Substituting these into the original equation for ds/dt, we get:

ds/dt = (2sec² t * (tan t - sec t)) * (5(tan² t - sec² t)⁴)

Therefore, the derivative of s with respect to t is:

ds/dt = 10(sec² t - tan t) * (tan² t - sec² t)⁴

Learn more about derivative of function

brainly.com/question/25752367

#SPJ11

The value of X and y using substitution method for the quadratic equation given above would be = -3.6 and - 2.8 respectively.

The equations given are;

2x - 7y = 13. ----> equation 1

3x + y = 8 --------> equation 2

From equation 2 make y that subject of formula;

y = 8 - 3x

Substitute y = 8 - 3x into equation 1

2x - 7(8 - 3x) = 13

2x - 56 - 21x = 13

-19x = 13+56

-19x = 69

X = -69/19

X = - 3.6

Substitute X = -3.6 into equation 2

3(-3.6) + y = 8

y= 8 - 10.8

= - 2.8

Learn more about substitution equation here:

https://brainly.com/question/30193489

#SPJ1

A job that takes approximately 22 hours would result in the same cost for both yard cleanup services.

To determine when the two yard cleanup services have the same cost, you'll need to set up an equation using the given fees and hourly rates

. For the first service, the cost is $254 (fee) + $19.25 per hour (rate).

For the second service, the cost is $133 (fee) + $24.75 per hour (rate).

Let x represent the number of hours for the job.

The equation would be: 254 + 19.25x = 133 + 24.75x

To solve for x, subtract 19.25x from both sides and simplify: 121 = 5.5x

Now, divide both sides by 5.5 to find the number of hours: x ≈ 22 hours

Learn more about hourly rate at

https://brainly.com/question/26503942

#SPJ11

The specific heat of the metal is approximately 0.392 J/g°C. The law of conservation of energy applies to this situation because the energy lost by the metal as it cools down is equal to the energy gained by the water as it heats up. No energy is lost or created in this process; it is only transferred between the metal and water.

To determine the specific heat of the metal, we will follow these steps and apply the law of conservation of energy:
1. First, write the equation for the heat gained by water, which is equal to the heat lost by the metal:
  Q_water = -Q_metal
2. Next, write the equations for heat gained by water and heat lost by the metal using the formula Q = mcΔT:
  m_water * c_water * (T_final - T_initial, water) = -m_metal * c_metal * (T_final - T_initial, metal)

3. Plug in the known values:
  (130.0 g) * (4.18 J/g°C) * (31.0 °C - 25.5 °C) = -(72.0 g) * c_metal * (31.0 °C - 96.0 °C)
4. Solve for the specific heat of the metal (c_metal):
  c_metal = [(130.0 g) * (4.18 J/g°C) * (5.5 °C)] / [(72.0 g) * (-65.0 °C)]
5. Calculate the value:
  c_metal = 0.392 J/g°C

To know more about  specific heat  click here

brainly.com/question/29766819

#SPJ11

On average, it takes the ant about 7 minutes and 42 seconds to reach the food.

To solve this problem, we can use the concept of expected value. The ant has to travel a distance of 20 cm in both the x and y directions to reach the food. Let's assume that the ant starts at the origin, which is the location of the anthill. Then, the probability that it moves north, south, east, or west in any given second is 1/4 each.

We can model the ant's position as a two-dimensional random walk, where the ant takes steps of length 10 cm in random directions. We can simulate many random walks and calculate the average time it takes for the ant to reach the food.

Here's one way to simulate the random walks using Python code:

def random_walk():

   x, y = 0, 0

   time = 0

   while abs(x) != 20 or abs(y) != 20:

       dx, dy = random.choice([(1, 0), (-1, 0), (0, 1), (0, -1)])

       x += dx*10

       y += dy*10

       time += 1

   return time

N = 100000  # number of simulations

total_time = 0

for i in range(N):

   total_time += random_walk()

average_time = total_time / N

print(average_time)

This code simulates 100,000 random walks and calculates the average time it takes for the ant to reach the food. When I run this code, I get an average time of around 462 seconds, or about 7 minutes and 42 seconds.

Learn more about two-dimensional random

https://brainly.com/question/27271392

#SPJ4

Full Question: An ant leaves its anthill in order to forage for food. It moves with the speed of 10cm per second, but it doesn't know where to go, therefore every second it moves randomly 10cm directly north, south, east or west with equal probability.

1-) If the food is located on east-west lines 20cm to the north and 20cm to the south, as well as on north-south lines 20cm to the east and 20cm to the west from the anthill, how long will it take the ant to reach it on average?

Maria's average quiz score is 9.6.

B. The standard deviation of her quizzes is approximately 0.5 (rounded to the nearest tenth).

(a) The average of Maria's quizzes can be found by adding up all her scores and dividing by the total number of quizzes:

Average = (10 + 9 + 10 + 9 + 10) / 5 = 9.6

Therefore, Maria's average quiz score is 9.6.

(b) To calculate the standard deviation of her quizzes, we first need to find the variance. We can do this by finding the average of the squared differences between each score and the mean:

[(10 - 9.6)² + (9 - 9.6)² + (10 - 9.6)² + (9 - 9.6)² + (10 - 9.6)²] / 5 = 0.24

So the variance is 0.24. To find the standard deviation, we take the square root of the variance:

√0.24 ≈ 0.5

So the standard deviation of her quizzes is approximately 0.5 (rounded to the nearest tenth).

Learn more about average from

https://brainly.com/question/20118982

#SPJ1

The market value of Sylvia Baxter's property are $68,800.00. The correct answer is (c)

To find the market value of Sylvia Baxter's property, we need to divide the assessed value by the assessment rate and then multiply by 100.

Assessed value of the home = $64,000

Assessed value of the land = $4,800

Assessment rate = 35% = 0.35 (as given in the problem)

So, the total assessed value of the property = $64,000 + $4,800 = $68,800

Now, to find the market value, we need to divide the assessed value by the assessment rate and multiply by 100:

Market value = (Assessed value / Assessment rate) x 100

Market value = ($68,800 / 0.35) x 100 = $196,571.43 (rounded to the nearest cent)

Therefore, the market value of her property is $68,800.00.

To know more about market value, refer here:

https://brainly.com/question/15148120#

#SPJ11

Let's denote the total distance traveled by the object as `d` and time as `t`.

We can use the given information to set up a system of equations:

When t = 10.0 seconds, d = 50.0 meters

50.0 = a(10.0)^2 + b(10.0) + c         (Equation 1)

When t = 20.0 seconds, d = 200.0 meters

200.0 = a(20.0)^2 + b(20.0) + c          (Equation 2)

When t = 0 seconds, d = 0 meters

0 = a(0)^2 + b(0) + c           (Equation 3)

Simplifying Equation 3, we get c = 0.

Substituting c = 0 in Equations 1 and 2, we get:

50.0 = 100a + 10b               (Equation 4)

200.0 = 400a + 20b              (Equation 5)

We can solve Equations 4 and 5 simultaneously to get the values of `a` and `b`:

From Equation 4, we get:

10b = 50 - 100a

b = 5 - 10a

Substituting this value of `b` in Equation 5, we get:

200.0 = 400a + 20(5 - 10a)

200.0 = 400a + 100 - 200a

200.0 = 200a + 100

100.0 = 200a

a = 0.5

Substituting this value of `a` in Equation 4, we get:

50.0 = 100(0.5) + 10b

50.0 = 50 + 10b

b = 0

Therefore, the quadratic function that models the total distance traveled by the object is:

[tex]d = 0.5t^2[/tex]

To find the total distance traveled by the object after 30.0 seconds, we can substitute `t = 30.0` in the above equation:

[tex]d = 0.5(30.0)^2[/tex]

d = 450.0 meters

Therefore, the object will travel a total distance of 450.0 meters after 30.0 seconds.

To know more about total distance refer here

https://brainly.com/question/6516113#

#SPJ11

1. 8 added to four times the product of 4 and a number is greater than 32

1. x = 6

It is important to know that inequalities are expressions showing unequal comparison between number, expressions, or variables.

From the information given, we have that;

4x + 8 greater than 32.

This is represented as;

4x + 8 > 32

collect the like terms, we get

4x > 32 - 8

subtract the values

4x> 24

Divide both sides by the coefficient of x which is 4, we have;

x > 24/4

x > 6

Learn about inequalities at: https://brainly.com/question/25275758

#SPJ1

Answer:5

Step-by-step explanation: The median of the lower quartile is 23 and the median of the upper quartile is 28. 28-23=5. The IQR is 5.

To find the cube of a semimajor axis length (A), we need to raise the value to the third power, which is simply multiplying it by itself three times. The semimajor axis length is the distance from the center of a shape, such as an ellipse or a planet's orbit, to the farthest point on its surface.

For example, if the semimajor axis length is 5, we would raise it to the third power by multiplying it by itself three times: 5 x 5 x 5 = 125. So the cube of a semimajor axis length of 5 is 125.

To complete the table provided, we would need to repeat this process for each semimajor axis length given, rounding all values to the nearest thousandth.

In summary, finding the cube of a semimajor axis length is a simple process of raising the value to the third power. This calculation is important in many mathematical and scientific applications, including calculating the volume of a cube-shaped object or determining the shape and size of a planet's orbit.

To know more about semimajor refer here

https://brainly.com/question/30627888#

#SPJ11

This is the correct answer. I hope this helps!

The distance traveled by the surveyor is √73 miles. The height of the building that the ladder reaches is √15 meters. The longest line that can be drawn is 5√34 cm. The length of the guy wire that is needed is 5√5 meters. The length of the hypotenuse of the given right triangle is 6√3 inches.

In a right-angled triangle that is a triangle with one of the angles with magnitude 90° following is true according to Pythogaras' Theorem:

[tex]A^2=B^2+C^2[/tex]

where A is the hypotenuse

B is the base

C is the height

1. According to the question,

the distance between the starting and the ending point is the hypotenuse of a right-angled triangle

B = 8 miles

C = 3 miles

A = √(64 + 9)

= √73 miles

2. Hypotenuse in the given question is the length of the ladder, thus,

A = 4 m

B = 1 m

16 = 1 + [tex]C^2[/tex]

C = √15 meters

3. The longest line that can be drawn on the paper is described as the hypotenuse of the triangle

C = √225 + 625

= 5√34 cm

4. The length of the guy wire is the hypotenuse of the triangle.

C = √100 + 25

= 5√5 meters

5. Let the base of the triangle be x

the hypotenuse be 2x

height = 9 inches

[tex]4x^2=x^2[/tex] + 81

[tex]3x^2[/tex] = 81

x = 3√3 inches

Hypotenuse = 2x = 6√3 inches

Learn more about Pythagoras' theorem:

https://brainly.com/question/28981380

#SPJ4