Answer:
The answer Is B.
Explanation:
The cats acceleration is decreased
by air resistance.
hope it helps you!
follow me for more
don't worry I'll try my best
If it takes 35J to lift up an object to some height, then how much gravitational potential energy will that object have?
Ingrid says that a red ball of clay appears red because the clay reflects red wavelengths. Simon says that the clay appears red because it allows red wavelengths to pass through it.
Which statement best explains who is correct?
Ingrid is correct. The clay appears red because it reflects red wavelengths.
Ingrid is correct. The clay appears red because it is a type of matter.
Simon is correct. The clay appears red because it allows red wavelengths to pass through it.
Simon is correct. The clay appears red because it is a solid.
Answer: (A) Ingrid is incorrect. The clay appears red because it reflects red wavelengths.
Explanation:
Edge 2021
Ingrid is correct. The clay appears red because it reflects red wavelengths.
Hence option A is correct.
What is wave ?Wave is is a disturbance in a medium that carries energy as well as momentum . wave is characterized by amplitude, wavelength and phase. Amplitude is the greatest distance that the particles are vibrating. especially a sound or radio wave, moves up and down. Amplitude is a measure of loudness of a sound wave. More amplitude means more loud is the sound wave.
Wavelength is the distance between two points on the wave which are in same phase. Phase is the position of a wave at a point at time t on a waveform.
There are two types of the wave longitudinal wave and transverse wave.
Longitudinal wave : in which, vibration of the medium (particle) is parallel to propagation of the wave. Sound wave is a longitudinal wave. Transverse wave : in which, vibration of the medium (particle) is perpendicular to propagation of the wave. Light wave is a Transverse wave.
Ingrid says that a red ball of clay appears red because the clay reflects red wavelengths. this statement is true.
Hence option A is correct.
To know more about absorption :
https://brainly.com/question/3080788
#SPJ7.
A man digs a hole in the soil next to a bush. How does the shovel make work easier for the man digging the hole? Check all that apply. The shovel changes the direction of the force the man applies. The man can apply less force. The man has to apply more force. The force applied by the end of the shovel decreases. The force applied by the end of the shovel increases.
Answer:
Following are the solution to the given points:
Explanation:
The shovel shifts the course of the man's force.
Man can use less power.
The strength at the end of the shovel is growing.
Its shovel is a tool that is used to excavate and transfer its large particles. This streamlines the job for all the men to find the pit.
Its machines modify their method that uses force. Its man must therefore use less force to lift the bulk material.
Answer:
The shovel changes the direction of the force the man applies.
The man can apply less force.
The force applied by the end of the shovel increases.
(a,b,e)
Explanation:
edge 2021
IF SOMEONE CAN'T FIND THE ANSWER I WILL COMMIT ARSON PLEASE HELP MEE
Brainliest + random amount of points please help me It's a crossword
Answer:
Freefall
Explanation:
Hi the answer is freefall, hope this helps :)
I’m offering 15 points for this 1 multiple choice question. The answer is not D. Pls answer, though I think I know the the answer, but I just want to make sure.
Answer:
I wanna say C
Explanation:
because A would be getting it nowhere and B would just take more time but when you use C it would be the greatest force.
One major concern of acid rain is that it can -
A. change the pH of soil and lakes
B. burn holes in the skin of humans and animals
C. it makes vegetation grow out of control
D. it turns trees red
Answer:
C. it makes vegetation grow out of control
Explanation:
please mark this answer as brainliest
You kick a ball. You are doing work on the ball when...
Find the average acceleration of a northbound subway train that slows down from 12 m/s to 9.6 m/s in 0.8 seconds.
Answer:
[tex]a=-3\ m/s^2[/tex]
Explanation:
Given that,
Initial speed of a train, u = 12 m/s
Final speed of a train, v = 9.6 m/s
Time taken, t = 0.8 s
We need to find the average acceleration of the train. We know that the rate of change of velocity is equal to acceleration. So,
[tex]a=\dfrac{v-u}{t}\\\\a=\dfrac{9.6-12}{0.8}\\\\a=-3\ m/s^2[/tex]
So, the average acceleration of the train is equal to [tex]-3\ m/s^2[/tex].
Un cuerpo cuya masa es de 20 kg se lleva primero a la luna y luego a marte. Teniendo en cuenta el factor que liga masa y peso en marte es de 3,8 N/Kg
Answer:
W = 76 N
Explanation:
In this exercise you are asked to find the weight of the body.
Mass is a quantity that is invariant, it measures the same everywhere, the weight depends on where it is measured, a simple way to find the weight of a body is
W = g m
where g is the constant of the place, in this case we have the weight of the body on Mars and its mass which is constant on Earth and on Mars
W = 3.8 20
W = 76 N
Can some one help me ;-;
Answer: The first answer for the first problem, and the 2nd answer for the second problem
Explanation: For the first one, if it is absolute zero, the molecules would not move at all.
For the second one, the temperature of the sample will increase due to the movement.
An atom's atomic mass (mass number) is its number of
Answer:
Is equal to the sum of the number of protons and neutrons in the nucleus.
Explanation:
What kind of energy does an electromagnet use to pick up metallic objects?
Answer:
Magnetic energy is used by an electromagnet to pick up metallic objects
Explanation:
An electromagnet generates its own magnetic field in presence of electric current.
As an electric current is induced in an electromagnet , it magnetic dipole arrange themselves in order to behave as a magnet and hence generate magnetic field with a proper north and south. This leads to attraction of metallic object.
Hence, it can be said that Magnetic energy is used by an electromagnet to pick up metallic objects
What happens during the process of deposition
Electrical potential is measured in units called what
Answer:
Electrical potential is measured in units called volts.
A KG object has a speed of 24 M/S if it has 14 J of kinetic energy what is the mass
Stress is __________.
A.
positive or negative, depending on circumstances
B.
a body's automatic physical response
C.
a negative reaction to outside influences
D.
A and B only
Answer:
(A)
Explanation:
Depending on the circumstances, there are such things called good stress and bad stress.
7. A jogger runs three blocks south, two blocks east, 4 blocks north and
two blocks west. What is the DISTANCE the jogger ran? *
Answer:
11 blocks
Explanation:
distance is adding up the numbers while displacement is the difference in starting and ending points
Focus Question: How are physical properties used to compare and classify substances?
Answer:
Properties that can be determined without changing the composition of a substance are referred to as physical properties. Characteristics such as melting point, boiling point, density, solubility, color, odor, etc. ... Physical and chemical properties can be used to classify a substance as ionic or molecular.
Explanation:
Hope it helps! Correct me if I am wrong!
Dont worry im sure about my answer!
If you dont mind can you please mark me as brainlest?
Its ok if you don't want to!
Recommend An architect wants to design a conference room that
reduces noise coming from outside the room. Suggest some design
features that should be considered in this project.
Answer:
Install sound absorbers such as foam or acoustical panels
Explanation:
They could install some sound absorbers such as foam or acoustical panels in the walls, floors, and ceiling of the conference room.
Which of the following decreases the dissolving rate of a solid in water?
A.
crushing the solid
B.
raising the temperature
C.
using larger pieces of solid
D.
stirring constantly
Answer:
Answer is C
Explanation:
Using larger pieces of the solid creates more area for dissolving therefore causing the decrease in dissolving...
Hope this helps
Help pls sand quickly plssssss
Answer:
The magnet produces an electric current in the wire
Explanation:
Answer: the first one is right
Explanation:
An object travels a distance d with acceleration a over a period of time t according to the equation: d = at² After 2.3 seconds with an acceleration of 9.8 m/s2, how far does an object travel (rounding the answer to two significant figures)?
Answer:
A 26m
Explanation:
firstly the answer will not be part c as distance unit will be meters (m)
next, substitute the values of a and t as shown
[tex]\frac{1}{2} (9.8)(2.3)^2 = 25.921[/tex]
the answer rounded off to 2 significant figures will be hence 26m
Help hurry help pls it’s timed
I think it's the yellow one
Students are asked to create a model that shows the components that help an organism process sensory input.
Organize the components in order from simplest to more complex that help an organism process sensory input.
brain
nervous system
brain tissue
nerve cell
Car accelerates uniformly from 22.5 m/s to 46.1 m/s in 2.47
seconds. Determine the acceleration of a car.
3. A large crane lifts a 25,000 kg mass in the air. The amount of work that must be done by the
crane's lifting components is 2.2 X 10'J (Wo). If the efficiency of the crane is 22%, how much
useful work is done on the mass (Wou)?
[tex]\mathfrak{\huge{\orange{\underline{\underline{AnSwEr:-}}}}}[/tex]
Actually Welcome to the concept of Efficiency.
Here we can see that, the Input work is given as 2.2 x 10^7 J and the efficiency is given as 22%
The efficiency is => 22% => 22/100.
so we get as,
E = W(output) /W(input)
hence, W(output) = E x W(input)
so we get as,
W(output) = (22/100) x 2.2 x 10^7
=> W(output) = 0.22 x 2.2 x 10^7 => 0.484 x 10^7
hence, W(output) = 4.84 x 10^6 J
The useful work done on the mass is 4.84 x 10^6 J
The tallest Ferris wheel in the world is located in Singapore. Standing 42 stories high and holding as many as 780 passengers, the Ferris wheel has a diameter of 150m and takes approximately 30 minutes to make a full circle. Determine the speed of the riders (in m/s) on the Singapore Flyer.
Answer:
The speed of the riders on the Singapore Flyer is approximately 0.262 m/s
Explanation:
The dimensions of the tallest Ferris wheel in the world are;
The diameter of the Ferris wheel, D = 150 m
The tine it takes the Ferris wheel to make a full circle, T = 30 minutes = 30 min × 60 s/min = 1,800 seconds
The angular velocity of the Ferris wheel, ω = 2·π/T
The linear velocity of the Ferris wheel, v = r·ω = The speed of the riders
Where;
r = The radius of the Ferris wheel = D/2
D = 150 m
∴ r = 150 m/2 = 75 m
∴ v = r·2·π/T
∴ v = 75 m × 2 × π/(1,800 s) ≈ 0.262 m/s
The speed of the riders on the Singapore Flyer, v ≈ 0.262 m/s
Which is the best description of a high pressure system?
A.
Air cools and rises.
B.
Air warms and rises.
C.
Air cools and sinks.
D.
Air warms and sinks.
Answer:
The Answer is gonna be B.
Air warms and rises.
Which of the following elements would you predict to have properties most like that of silicon, aluminum, phosphorous, or germanium?
2. 3. 4. 5. 6. 7. A(n)results when a vehicle loses part or all of its grip on the road. is a technique that can be applied when trying to move your vehicle out of deep snow. The action of a vehicle's rear end sliding out to a side is called a(n) is a technique of reducing your speed as quickly as possible while maintaining control of your vehicle. Driving at a speed where the stopping distance of your vehicle is longer than the distance you can see with your headlights is called occurs when a tire loses road surface contact and rises on top of water. It is a(n)when your front tires begin 1 18 1 1 to plow and your vehicle is not responding, or not responding as quickly as it should, to a steering input.
Answer:
1) Skid
2) Rocking
3) Oversteer situation
4) Controlled breaking
5) Overdriving headlights
6) Hydroplaning
7) Understeer situation
Explanation:
1) A skid results when a vehicle loses part or all of its grip on the road
2) Rocking is a technique that can be applied when trying to move your vehicle out of deep snow
3) The action of vehicle's rear end sliding out to a side is called an oversteer situation
4) Controlled breaking is a technique of reducing your speed as quick as possible while maintaining control of your vehicle
5) Driving at a speed where the stopping distance of your vehicle is longer than the distance you can see with your headlights is called overdriving headlights
6) Hydroplaning occurs when a tire loses road surface contact and rises on top of water
7) It is an understeer situation when your front tires begin to plow and your vehicle is not responding or not responding as quickly as it should, to a steering point
