The lytic cycle is a viral replication cycle that involves the infection, replication, and lysis (destruction) of the host cell. It is commonly observed in bacteriophages (viruses that infect bacteria). The steps of the lytic cycle, labeled 1-5, are as follows:
The virus attaches to the host cell.
The virus releases a protein that causes the cell wall to burst (lysis), killing the cell and releasing viruses.
The host's DNA is disassembled, and the virus takes over the cell's metabolic activity.
The new viral nucleic acid and viral proteins are replicated.
The pieces made in replication are assembled to complete the new virus particles.
During the lytic cycle, the virus attaches to the host cell and injects its genetic material (either DNA or RNA) into the cell. The viral genetic material then takes over the host cell's machinery to produce new viral components, such as viral nucleic acids and proteins.
These components are assembled to form new virus particles. Eventually, the host cell undergoes lysis, where it bursts open, releasing the newly formed viruses. The released viruses can then go on to infect other host cells and continue the lytic cycle.
For more details regarding the lytic cycle, visit:
https://brainly.com/question/17705456
#SPJ12
(a) Describe the pattern of inheritance that is most likely associated with a mutation in the MT-ND5 gene.
The pattern of inheritance most likely associated with a mutation in the MT-ND5 gene is maternal inheritance. This is because the MT-ND5 gene is located within the mitochondrial DNA, and mitochondria are inherited exclusively from the mother.
The MT-ND5 gene is located in the mitochondrial DNA and codes for a subunit of Complex I of the mitochondrial respiratory chain. Mutations in this gene have been associated with a variety of mitochondrial diseases, including Leigh syndrome, which is a progressive neurodegenerative disorder.
Mitochondrial DNA is inherited maternally, meaning all offspring receive their mitochondrial DNA from their mother. This is because the egg cell contributes most of the cytoplasm to the developing embryo, thus most of the mitochondria. The sperm, on the other hand, typically only contributes its genetic material.
Therefore, if a mother has a mutation in her mitochondrial DNA, all her children will inherit the mutation. However, the severity of the disease caused by the mutation can vary widely, even among siblings with the same mutation.
The pattern of inheritance associated with a mutation in the MT-ND5 gene is, therefore, mitochondrial inheritance, or maternal inheritance.
Learn more about inheritance here :
https://brainly.com/question/14930526
#SPJ11
For a sequence of mrna, how many reading frames are possible?.
For a sequence of mRNA, there are three reading frames possible.
The genetic information in DNA is transcribed into mRNA, which is then translated into proteins. The mRNA sequence is read in groups of three nucleotides called codons.
Each codon specifies a particular amino acid to be added to the growing polypeptide chain during translation. However, the reading frame, or the grouping of nucleotides into codons, can be shifted by one or two nucleotides, resulting in a different amino acid sequence.
Thus, for a given mRNA sequence, there are three possible reading frames, one for each possible starting position of the codon triplets. The correct reading frame is established by the start codon, AUG, which codes for the amino acid methionine and signals the beginning of translation. If the reading frame is shifted, the resulting protein may be completely different, leading to a frameshift mutation.
Therefore, the three possible reading frames of mRNA are crucial for the accurate translation of genetic information into proteins.
To know more about mRNA sequence, refer here:
https://brainly.com/question/22173633#
#SPJ11
Research and provide a description of the "talk test" and "breath test" as it relates to physical activity. Make reference to the anaerobic threshold in your answer. (10 marks: 3 definition, 2 reference to the anaerobic threshold) – you must describe the test and how it is conducted. A) What are the effects of the ‘talk test’ and ‘breath sound check’ on the body? (2 marks) b) How do the tests relate to intensity level? (2 marks) 2) Why is it important for an athlete to get rid of CO 2 than take in O 2 ? (2 marks) 3) Why do trained subjects have a lower VE (Minute Ventilation) during exercise? Explain. (2 marks) 4) What is the relationship between the lactate threshold and ventilatory threshold? (2 marks) 5) Describe what VO2 max is and how it differs between a trained and untrained individual. (4 marks) 6) What is a ‘Shallow Water Blackout’? Explain how it happens in terms O2 and CO2 levels (4 marks) ** References should be embedded in the write up**
Two techniques are used to gauge an individual's exercise intensity during physical activity: the "talk test" and the "breath test."
A self-paced way of gauging exercise intensity called the "talk test" involves having a conversation while exercising. This test is frequently employed as a benchmark for moderate-intensity exercise, which is typically understood as a tempo at which a person may converse while exercising. VO2 max is the maximum amount of oxygen an individual can utilize during intense exercise, and it is an indicator of cardiovascular fitness.
The "breath test" is a technique for calculating ventilation rate, which is a measurement of how much air a person breaths in and out per minute when exercising. In order to fulfil the increased metabolic demand during vigorous activity, the body generates more carbon dioxide [tex](CO_2)[/tex] and needs more oxygen[tex](O_2).[/tex] The link between ventilation rate and exercise intensity may thus be assessed using the breath test.
Learn more about physical activity Visit: brainly.com/question/1744272
#SPJ4
As with the emergence of acoelomorpha phylum, it is common for___ data to misplace animals in close relation to other species whereas ___ data often reveals a different and more accurate evolutionary relationship
Molecular data can sometimes misplace animals in close relation to other species because of convergent evolution or incomplete lineage sorting.
Convergent evolution occurs when two different species independently evolve similar characteristics due to similar selective pressures.
Incomplete lineage sorting occurs when two lineages diverge from a common ancestor, but the splitting of the lineages is not complete, leading to some shared genetic variation.
Morphological data, on the other hand, often reveals a different and more accurate evolutionary relationship as it is based on physical features of the organisms, which can be a better indicator of evolutionary history.
Therefore, combining both molecular and morphological data is crucial for establishing accurate evolutionary relationships.
To know more about Molecular data, refer here:
https://brainly.com/question/29732713#
#SPJ11
Why is it important to study variations in monkey populations?
Studying variations in monkey populations is important because it can help us better understand the evolution of primates, including humans.
By studying the genetic, behavioral, and physiological variations among different monkey populations, researchers can gain insights into how traits are passed down through generations and how natural selection shapes these traits over time.
This information can also be used to inform conservation efforts, as understanding the genetic diversity and geographic distribution of different monkey populations can help guide conservation efforts aimed at protecting these endangered species.
Additionally, studying monkey populations can shed light on the ecological and environmental factors that influence animal behavior and adaptations, which can inform our understanding of broader ecological systems.
To know more about primates, refer here:
https://brainly.com/question/30667957#
#SPJ11
1. Two people heterozygous for Tay-Sachs (recessive disease) have two children who are both normal. What are the chances of their third child having Tay-Sachs? What are the chances of their fourth child having Tay-Sachs?
The chances of the third child having Tay-Sachs are: 25%, and the chances of the fourth child having Tay-Sachs are also: 25%.
This is because both parents are heterozygous carriers of Tay-Sachs, meaning they have one normal allele and one mutated allele.
When they have children, each child has a 25% chance of inheriting two copies of the mutated allele, which would result in Tay-Sachs disease.
Each child also has a 50% chance of inheriting one normal allele and one mutated allele, making them a carrier like their parents, and a 25% chance of inheriting two normal alleles, making them completely unaffected.
Since the previous two children were both normal, this does not affect the chances of the third and fourth child having Tay-Sachs, as the inheritance of alleles is independent for each child.
Therefore, the chances of each child having Tay-Sachs are still 25%.
To know more about "Tay-Sachs disease" refer here:
https://brainly.com/question/15585980#
#SPJ11
A dam breaks, separating a population of dung beetles into one large group and one much smaller group. This species of dung beetle only reproduce once a year and females typically only produce one or two offspring.
What type of isolation is this called?
What group runs the greater risk of decreased genetic diversity/variation?
Answer: I honestly don't have a clue what this is called but the smaller group runs a higher risk of non-genetic diversity.
Hope this helps :)
Explanation:
If a single cycle of PCR takes 5 minutes, it should it take _______ minutes to amplify one double-stranded molecule into 64
If a single cycle of PCR takes 5 minutes, it should it take 30 minutes to amplify one double-stranded molecule into 64
PCR (Polymerase Chain Reaction) is a laboratory technique that can be used to amplify DNA fragments. In each cycle of PCR, the amount of DNA is doubled.
Therefore, to determine how long it would take to amplify one double-stranded molecule into 64 molecules, we need to calculate the number of cycles required.
To amplify one double-stranded molecule into 64, it would require 6 cycles of PCR since 2^6 = 64.
If each cycle of PCR takes 5 minutes, then 6 cycles would take a total of 30 minutes (6 cycles x 5 minutes per cycle). Therefore, it would take 30 minutes to amplify one double-stranded molecule into 64 using PCR.
To learn more about PCR here: https://brainly.com/question/7177771
#SPJ4
The pre cell (before the appearance of life) formed during chemical evolution has an outer membrane that is a phospholipid bilayer. given the properties of the water in the prebiotic ocean. one would expect that h2o and ions would: _______
In the pre-cell (before the appearance of life) formed during chemical evolution with an outer membrane that is a phospholipid bilayer, one would expect that H2O and ions would: contribute to the formation and stability of the phospholipid bilayer in pre-cells during chemical evolution.
It would also be attracted to the polar head groups of the phospholipids in the bilayer. Form hydration shells around the polar head groups, providing stability to the bilayer structure. Interact with the membrane through passive diffusion, facilitated diffusion, or active transport, depending on the properties of the ions and the membrane.
The presence of H2O and ions in the prebiotic ocean would contribute to the formation and stability of the phospholipid bilayer in pre-cells during chemical evolution.
Learn more about facilitated diffusion here: https://brainly.com/question/18122054
#SPJ11
one problem with informal interviews to identify potential reinforcers is they are not is definiton of what?
One problem with informal interviews to identify potential reinforcers is they are not is definition of: systematic.
Informal interviews are not systematic in nature as they do not follow a structured or standardized approach to identify potential reinforcers.
In such interviews, the questions asked are generally open-ended, and there is no standardized set of questions or procedures that need to be followed.
This lack of structure can lead to a biased selection of reinforcers, where the interviewer's personal biases and preferences may influence the selection process.
Additionally, informal interviews may not provide a comprehensive understanding of all possible reinforcers that may be effective for an individual.
On the other hand, a systematic approach involves following a standardized set of procedures and questions to identify potential reinforcers, which can help to ensure that all possible reinforcers are identified and evaluated in a fair and unbiased manner.
This may involve conducting structured interviews, using checklists or rating scales, and involving multiple individuals in the selection process to reduce the impact of individual biases.
A systematic approach can help to increase the likelihood of identifying effective reinforcers and developing an effective behavior intervention plan.
To know more about "Systematic" refer here:
https://brainly.com/question/30764372#
#SPJ11
Which of the below is NOT a law of thermodynamics?
Group of answer choices
Energy must be absorbed.
Energy cannot be created or destroyed.
Energy spreads out spontaneously.
The entropy of any isolated system always increases
A
Energy must be absorbed is not a law
Alzheimer's disease: piecing together the evidence assignment answers????
Alzheimer's disease is a progressive neurodegenerative disorder characterized by memory loss, cognitive decline, and behavioral changes.
The evidence supporting our understanding of Alzheimer's includes amyloid-beta plaques, neurofibrillary tangles, and genetic factors.
Researchers are continuously working on piecing together the evidence to find effective treatments and potential preventive measures for this complex disease.
Neurofibrillary Tangles: Another characteristic feature of Alzheimer's disease is the formation of neurofibrillary tangles inside neurons. These tangles are composed of abnormal forms of a protein called tau.
Tau proteins normally help stabilize microtubules, which are essential for maintaining the structure and transport within neurons.
However, in Alzheimer's disease, tau proteins become abnormal and clump together, leading to the breakdown of the microtubule structure and impairing neuronal function.
Genetic Factors: Genetic factors play a role in Alzheimer's disease. Mutations in certain genes, such as the APP gene, presenilin 1 (PSEN1) gene, and presenilin 2 (PSEN2) gene, have been linked to familial cases of early-onset Alzheimer's disease.
However, these cases represent a small percentage of overall Alzheimer's cases. The most common form of Alzheimer's is late-onset and is influenced by a combination of genetic and environmental factors.
Research and Treatment: Researchers are actively investigating Alzheimer's disease to improve our understanding of its underlying mechanisms and develop effective treatments.
Numerous approaches are being explored, including targeting amyloid-beta plaques and neurofibrillary tangles, reducing inflammation, enhancing neurotransmitter function, and promoting neuronal protection and repair.
While there is currently no cure for Alzheimer's disease, available treatments aim to alleviate symptoms and slow disease progression.
To learn more about treatment, refer below:
https://brainly.com/question/31477810
#SPJ11
What did you observe with the halves of the drawing you and a family member made , when yoou placed them beside the mirror?
When you place the halves of the drawing made by you and a family member beside the mirror, you would observe the following:
1. Position the drawing halves side by side, with one half touching the mirror.
2. Look at the reflection of the half touching the mirror. You will see that it creates a complete image of the drawing in the mirror.
3. Compare the reflected image with the other half of the drawing made by your family member.
4. Notice any differences or similarities between the two halves of the drawing, as well as how the reflection in the mirror helps to complete the image.
By doing this activity, you can observe how mirrors create symmetrical reflections and explore the concept of symmetry in drawings and everyday objects.
Learn more about reflection here: https://brainly.com/question/29842530
#SPJ11
Which best describes the pattern seen between planet diameter and density?
If planets have a high density, they tend to have a smaller diameter.
If planets have a high density, then tend to have
a larger diameter.
There is no pattern between planet density and diameter.
NAVEDO
D
The relationship between a planet's diameter and density is not consistent or easily defined. Generally speaking, planets with a high density tend to have a smaller diameter, while planets with a lower density tend to have a larger diameter.
Here, correct option is A.
This trend is largely due to the fact that high-density planets are typically composed of heavier materials, such as iron, nickel and rock, which provide less volume than lighter materials, such as hydrogen and helium. However, there are exceptions to this rule, such as the small, icy dwarf planets in the outer Solar System, which have a relatively low density and a large diameter.
Ultimately, the size and density of a planet is determined by the composition of the material that makes it up and the amount of gravity the planet is subjected to. As such, there is no one-size-fits-all pattern between planet diameter and density.
Therefore, correct option is A.
Know more about planet's diameter here
https://brainly.com/question/16357823#
#SPJ11
Complete question is :
Which best describes the pattern seen between planet diameter and density?
A. If planets have a high density, they tend to have a smaller diameter.
B. If planets have a high density, then tend to have a larger diameter.
C. There is no pattern between planet density and diameter.
D. NAVEDOD
pollution can be controlled by____ the pollution at the power plant
Answer:
Pollution can be controlled by reducing the pollution at the power plant.
which one of the four recorded motor unit action potentials (muaps) corresponds to the smallest number of muscle fibers contracting?
Based on your question, the motor unit action potential (MUAP) that corresponds to the smallest number of muscle fibers contracting is the one with the lowest amplitude. The amplitude of a MUAP is directly related to the number of muscle fibers activated, so a lower amplitude indicates fewer muscle fibers contracting.
The motor unit action potential (MUAP) that corresponds to the smallest number of muscle fibers contracting is typically referred to as a "low amplitude" or "small" MUAP. This MUAP reflects the activation of a small number of muscle fibers by a single motor neuron. The other recorded MUAPs with higher amplitudes correspond to the activation of larger numbers of muscle fibers by the same motor neuron. It is worth noting that the specific number of muscle fibers that are activated by a single motor neuron can vary depending on the muscle and the individual.
Learn more about muscle fibers here: brainly.com/question/30176507
#SPJ11
describe the general structure of multicellular fungi, including the type of cells they have, the cell wall composition, how they undergo vegetative growth, and the adaptive ways fungi obtains food and transports its nutrients throughout the body.
Multicellular fungi possess a network of thread-like structures called hyphae, having eukaryotic cells and a chitin-based cell wall. They exhibit vegetative growth through the extension and branching of these hyphae. Fungi have adaptive ways of obtaining food, including decomposing organic matter or forming symbiotic relationships, and transport nutrients throughout their network of hyphae.
The general structure of multicellular fungi involves a network of thread-like structures called hyphae, which collectively form the mycelium. These fungi have eukaryotic cells, characterized by the presence of a nucleus and membrane-bound organelles.
The cell wall composition in multicellular fungi primarily consists of chitin, a strong, flexible polysaccharide that provides support and protection. In some fungi, the cell walls may also contain glucans and proteins.
Vegetative growth in fungi occurs through the extension and branching of hyphae. This process, called apical growth, takes place at the tips of the hyphae, where the cell wall material is added, and the hyphae elongate and branch.
Fungi obtain food through their unique absorptive heterotrophic feeding strategy. They secrete extracellular enzymes that break down complex organic materials in their surroundings into simpler compounds, which are then absorbed into the hyphae. This process allows fungi to decompose dead organic matter, act as symbiotic partners, or even as parasites.
Transportation of nutrients in multicellular fungi is facilitated through the interconnected network of hyphae within the mycelium. Nutrients are absorbed by individual hyphae and distributed throughout the fungal body, supporting growth and reproduction.
For more such questions on hyphae, click on:
https://brainly.com/question/11922947
#SPJ11
Emily is a student in biology lab. She conduct several experiments to investigate properties of amylase, an enzyme which converts starch into glucose. Benedict’s region is a blue colored chemical which changes colors according to the amount of glucose in a sample. Benedict regent remains blue in the presence of starch. Emily feel seven test tubes with an equal amount of amylase and water. Next she places each tube in a different water bath for 10 minutes. She adds an equal amount of starch to each tube and performs a Benedict test
Emily conducted an experiment to investigate the properties of amylase, an enzyme that converts starch into glucose.
She filled seven test tubes with equal amounts of amylase and water, before placing each tube in its own water bath for 10 minutes. After this, an equal amount of starch was added to each tube before the Benedict test was performed. The Benedict test involves a blue chemical, which changes colour according to the amount of glucose present in the sample. It remains blue in the presence of starch.
Emily observed the colour change of the reagent in each of the tubes, to determine the amount of glucose present in each. This experiment helped her to understand how the enzyme amylase works, and how it affects the conversion of starch into glucose.
Know more about amylase here
https://brainly.com/question/31534644#
#SPJ11
complete question is:
Emily is a student in biology lab. She conduct several experiments to investigate properties of amylase, an enzyme which converts starch into glucose. Benedict’s region is a blue colored chemical which changes colors according to the amount of glucose in a sample. Benedict regent remains blue in the presence of starch. Emily feel seven test tubes with an equal amount of amylase and water. Next she places each tube in a different water bath for 10 minutes. She adds an equal amount of starch to each tube and performs a Benedict test. EXPLAIN.
Which of the two seal groups, earless seals or fur seals, can move rapidly on land? why?
Fur seals are able to move rapidly on land due to their large foreflippers and powerful hindquarters. The combination of these two features allows fur seals to "gallop" on land, enabling them to cover large distances quickly.
This is an adaptation that has been developed over time due to the seals’ need to move between breeding and foraging grounds. The hindquarters of fur seals are also used to propel them through the water and are far more powerful than those of the earless seals.
Earless seals, on the other hand, lack the powerful hindquarters of their fur seal counterparts and rely primarily on their front flippers for movement. Earless seals are well adapted for aquatic locomotion and slow, undulating movements on land.
Know more about adaptation here
https://brainly.com/question/31297595#
#SPJ11
Early seed plants were pollinated by: Group of answer choices bees. Butterflies. Wind. Birds. Still water
Early seed plants were pollinated by a variety of organisms, including bees, butterflies, wind, and birds.
Here, all the options are correct.
Bees are important pollinators for many flowering plants, and in the case of early seed plants, they would have been a key factor in pollinating the flowers and helping them to reproduce. Butterflies are also important pollinators and may have been active in helping early seed plants reproduce as well.
Wind can also be important in pollination, particularly for plants that produce large amounts of pollen and dispersing it over a wide area. Finally, birds can be important pollinators as well, particularly in the case of plants that rely on large, brightly colored flowers to attract them.
Still water can also be important for some plants, as it can help to disperse their pollen and provide a medium for their reproduction. All of these factors would have been important for the success of early seed plants and the evolution of the plant kingdom.
Therefore, all the options are correct.
Know more about pollinators here
https://brainly.com/question/13260796#
#SPJ11
Many of Earth's biodiversity hotspots are also home to communities of people who are living at the subsistence level-able to obtain just what they need for daily survival. Is it realistic to think conservation plans for such regions can be designed to serve local people as well? explain why or why not. BRAIN LIST
It is realistic to think that conservation plans for biodiversity hotspots can be designed to serve local people living at the subsistence level.
This can be achieved by incorporating sustainable resource management, community-based conservation initiatives, and eco-tourism. By addressing both ecological and socio-economic needs, such plans can help protect biodiversity while improving the well-being of the local communities.
Sustainable Resource Management: Conservation plans for biodiversity hotspots should prioritize sustainable resource management practices.
This involves promoting responsible harvesting of natural resources, such as timber, non-timber forest products, and fisheries, ensuring that their extraction does not exceed the ecosystem's capacity to regenerate.
By adopting sustainable practices, local communities can continue to meet their subsistence needs while preserving the biodiversity upon which they depend.
Community-Based Conservation Initiatives: Conservation plans can be designed to empower local communities and involve them as key stakeholders in biodiversity protection.
By recognizing the rights and traditional knowledge of indigenous peoples and local communities, conservation initiatives can benefit from their deep understanding of the local ecosystems.
Eco-Tourism: Sustainable eco-tourism can play a crucial role in biodiversity conservation while generating economic benefits for local communities.
By promoting responsible tourism practices that minimize negative impacts on ecosystems, conservation plans can leverage the natural and cultural assets of biodiversity hotspots to create economic opportunities for local people.
To learn more about leverage, refer below:
https://brainly.com/question/30985112
#SPJ11
The diagram below shows the steps of DNA replication.
Which of the following is the correct sequence of replication?
2, 1, 4, 3
3,4, 1, 2
3, 4, 2, 1
3, 1,4, 2
Answer:
B
Explanation:
What is it called when a membrane protein moves a substance from low to high concentration through a protein channel?
The process is called active transport. Specifically, when a membrane protein moves a substance from a low to high concentration through a protein channel, it is referred to as primary active transport.
This is because the movement of the substance against the concentration gradient requires energy in the form of ATP, which is directly used by the membrane protein to carry out the transport.
This type of active transport is important for maintaining concentration gradients across the cell membrane, which is critical for many cellular processes such as nutrient uptake, signal transduction, and ion balance.
Examples of primary active transport include the sodium-potassium pump and the proton pump.
To know more about cell membrane, refer here:
https://brainly.com/question/13524386#
#SPJ11
The cranial nerve responsible for movement of the medial rectus, superior rectus, inferior rectus and inferior oblique eye muscles is the ________ nerve. group of answer choices hypoglossal
The cranial nerve responsible for the movement of the medial rectus, superior rectus, inferior rectus, and inferior oblique eye muscles is the oculomotor nerve (cranial nerve III). The correct answer is option C.
The oculomotor nerve (cranial nerve III) is one of the twelve cranial nerves that originate in the brainstem. It is responsible for the control of most of the movements of the eye, including constriction of the pupil, focusing the lens of the eye, and the coordinated movement of several extraocular muscles that control eye movement.
The oculomotor nerve emerges from the midbrain and travels through the cavernous sinus, a large venous sinus in the skull, before entering the orbit through the superior orbital fissure. In the orbit, the nerve branches into several smaller nerves that innervate the muscles of the eye.
Damage to the oculomotor nerve can result in a number of different symptoms, depending on which portion of the nerve is affected. These can include drooping eyelids (ptosis), double vision (diplopia), and difficulty moving the eye in certain directions. In some cases, damage to the oculomotor nerve can be a sign of a more serious underlying condition, such as a brain tumor or an aneurysm.
The correct option is c) oculomotor nerve .
Learn more about oculomotor nerve here:
https://brainly.com/question/30766717
#SPJ11
The complete question would be -
The cranial nerve responsible for the movement of the medial rectus, superior rectus, inferior rectus, and inferior oblique eye muscles is the ________ nerve.
a) hypoglossal
b) abducens
c) oculomotor
d) ophthalmic
Lizzie is making bread. she adds yeast to her flour and other ingredients before
placing it in the oven. lizzie's bread rises nicely. how did the bread rise?
The yeast that Lizzie added to the flour and other ingredients is responsible for the bread rising.
Yeast is a type of fungi that ferments the sugar in the dough, producing carbon dioxide gas as a byproduct. This gas gets trapped in the gluten network of the dough, causing it to rise and expand. As the bread bakes, the heat causes the carbon dioxide to expand further, giving the bread its light and airy texture. This process is known as yeast fermentation, and it is a crucial step in making bread.
In addition to yeast fermentation, other factors can also affect the rise of the bread. For example, the temperature and humidity of the environment in which the bread is proofed can impact the rate of fermentation.
To learn more about yeast follow the link:
https://brainly.com/question/14117480
#SPJ4
Help me please I’m cannot understand
Answer/explanation:
3.
A) A dominant allele is the allele that is more prominent and over rules the weaker/recessive allele.
B) a genotype is the genetic make up that is in a living organism. A phenotype is the physical traits that one has (ex. blue eyes, curly hair)
C) Heterozygous, hetero meaning different, means that it is a mix of two different alleles (ex. Bb). Homozygous means two of the same (ex. BB or bb).
4.
A) The genotype, the actual make up ends up being a mix of both parents (heterozygous). It is, Hh.
B) Usually in biology the capital letter is the more dominant allele/gene, therefore the phenotype (physical feature) should be the child having a widow's peak.
explanation: Since the dominant gene is the widow's peak then that will be the gene that shows up in the child's phenotype.
Hope this helps?!
Which of the chains of amino acids corresponds to the nucleotide sequence uca-agc-gua? a glu-cys-pro
b glu-asp-"stop"
c thr-arg-met
d ser-ser-val
ser-ser-val is the chains of amino acids corresponds to the nucleotide sequence uca-agc-gua. Correct option is D.
Proteins are made up of substances called amino acids. Proteins and amino acids are the components of life.
Amino acids are the byproducts of the digestion or breakdown of proteins. Amino acids are used by the human body to create proteins that aid in: Dissect the food, Grow, rehabilitate body tissue and perform a variety of other bodily tasks.
The body can also utilise amino acids as a source of energy.
There are three categories for amino acids: required amino acids, auxiliary amino acids and specific amino acids
The body is unable to produce essential amino acids. They must therefore originate from food.
Histidine, isoleucine, leucine, lysine, methionine, phenylalanine, threonine, tryptophan, and valine are the nine essential amino acids.
To know more about amino acids, click:
https://brainly.com/question/8869966
#SPJ4
Does the process of glycolysis require oxygen? (not including Krebs or the Electron Transport)
Answer:
Glycolysis
(Link reaction)
Krebs Cycle/TCA cycle
Electron transport chain/oxidative phosphorylation
Explanation:
Hand sanitizer with 60% alcohol is produced in anaerobic conditions
Hand sanitizer with 60% alcohol is not produced in anaerobic conditions. Instead, it is typically created by mixing ethanol or isopropanol alcohol with other ingredients such as glycerin, hydrogen peroxide, and distilled water.
Anaerobic conditions refer to an environment without oxygen, which is not relevant to the production of hand sanitizer.
To produce hand sanitizer with 60% alcohol, the alcohol component (ethanol or isopropanol) is usually combined with other ingredients like glycerin, hydrogen peroxide, and distilled water.
Glycerin is often added to moisturize and prevent the skin from drying out, while hydrogen peroxide helps to eliminate any potential contaminants. Distilled water is used to dilute the alcohol and achieve the desired alcohol concentration.
The production process typically involves mixing these ingredients together under controlled conditions, ensuring that they are thoroughly combined and properly blended. The resulting mixture is then bottled and sealed for distribution.
It's important to note that hand sanitizers should be manufactured following specific guidelines and regulations to ensure their safety and effectiveness.
These guidelines include maintaining proper hygiene standards during production, using quality ingredients, and adhering to the recommended alcohol concentration.
To learn more about concentration, refer below:
https://brainly.com/question/10725862
#SPJ11
Hand sanitizer with 60% alcohol is produced in anaerobic conditions, what are the potential reasons for producing hand sanitizer with 60% alcohol in anaerobic conditions?
ovulation begins when a mature egg(ovum) is released from an ovary. peristaltic contractions and the action of cilia transport the ovum through the fallopian tube to the uterus. the hormones estrogen, follicle-stimulating hormone (fsh), luteinizing hormone, and progesterone regulate and control this process.
Ovulation is the process by which a mature egg or ovum is released from the ovary regulated by estrogen, follicle-stimulating hormone (FSH), luteinizing hormone (LH), and progesterone, the correct options are B, C, D, & E.
During the menstrual cycle, rising levels of estrogen stimulate the growth and maturation of ovarian follicles. When the follicle reaches maturity, LH levels surge, triggering the release of the mature egg from the ovary. Peristaltic contractions and the action of cilia in the fallopian tube transport the ovum toward the uterus, where it may be fertilized by sperm.
Following ovulation, the remnants of the follicle form the corpus luteum, which produces progesterone. Progesterone helps to prepare the uterus for pregnancy by thickening the endometrium and suppressing further ovulation. If fertilization does not occur, the corpus luteum degenerates, progesterone levels drop, and menstruation occurs, the correct options are B, C, D, & E.
To learn more about progesterone follow the link:
https://brainly.com/question/12732603
#SPJ1
The correct question is:
Ovulation begins when a mature egg(ovum) is released from an ovary.
A) peristaltic contractions and the action of cilia transport the ovum through the fallopian tube to the uterus
B) the hormones estrogen
C) follicle-stimulating hormone (FSH)
D) luteinizing hormone
E) progesterone regulate and control this process.
