i need help with this pls!<333 would be so appreciated

The angular acceleration of the pottery wheel is 0.728 rad/s², and whereas the time it takes for the pottery wheel to reach its required speed of 65 rpm is 1.93 s.

(a) The small rubber wheel drives the large pottery wheel through frictional forces at their point of contact. Since they are in contact without slipping, the linear speed of the small wheel must be equal to the linear speed of the large wheel.

The linear speed of the small wheel can be found using the formula [tex]v = \omega r,[/tex] where ω is the angular velocity and r is the radius. The small wheel has an angular acceleration of 6.0 rad/s², so its angular velocity increases as  [tex]\omega = \alpha t[/tex] , where t is time.

Substituting the given values, we get v = (6.0 rad/s²)(2.8 cm) t. The linear speed of the large wheel is the same as that of the small wheel, so we can use the formula [tex]v = \omega r[/tex] to find its angular velocity. Substituting the given values, we get  [tex]\omega = v/r[/tex]

[tex]= (6.0\;rad/s^2)(2.8\;cm)/(23.0\cm)[/tex]

= 0.728 rad/s².

(b) The time it takes for the pottery wheel to reach its required speed of 65 rpm can be found using the formula [tex]\omega = (2\pi n)/60[/tex], where n is the rotational speed in rpm.

Solving for n, we get [tex]n = (60 \;\omega)/(2\pi )[/tex]

= (60)(0.728)/(2π)

= 11.6 rpm.

The time it takes to reach this speed can be found using the formula [tex]t = (n - n0)/\alpha[/tex], where n0 is the initial rotational speed (which is zero in this case).

Substituting the given values, we get t = (11.6 rpm - 0 rpm)/(6.0 rad/s²) = 1.93 s.

In summary, A small rubber wheel drives a large pottery wheel through frictional forces. The angular acceleration of the pottery wheel can be found using the formula [tex]\omega = v/r[/tex] where v is the linear speed of the small wheel and r is the radius of the pottery wheel.

The time it takes for the pottery wheel to reach its required speed can be found using the formula t = (n - n0)/α, where n is the final rotational speed and α is the angular acceleration.

To know more about acceleration refer here:

https://brainly.com/question/30413854#

#SPJ11

The gravitational force between the two masses is approximately 1.96 x 10⁻⁹ N. Option B is correct.

The gravitational force between two masses can be calculated using the formula;

F=G x (m₁ x m₂) / r²

Where F is the gravitational force, G is the gravitational constant, m₁ and m₂ are the masses of the two objects, and r is the distance between their centers of mass.

In this case, m₁ = 4.0 kg, m₂ = 7.0 kg, r = 1.0 m, and G = 6.67 x 10⁻¹¹ N x m²/kg². Plugging these values into the formula gives;

F = (6.67 x 10⁻¹¹ N x m²/kg²) x (4.0 kg x 7.0 kg) / (1.0 m)²

F = 1.96 x 10⁻⁹ N

Therefore, the gravitational force is 1.96 x 10⁻⁹ N.

Hence, B. is the correct option.

To know more about gravitational force here

https://brainly.com/question/24783651

#SPJ1

--The given question is incomplete, the complete question si

"A 4.0 kg mass is 1.0 m away from a 7.0 kg mass. What is the gravitational force between the two masses? (Remember to use the gravitational constant, G = 6.67 x 10-11 N x m2/ kg2, in your calculation.) A) 6.67 x 10 -11 N B) 1.9 x 10 -9N C) 6.67 x 10 10N D) 3.8 N."--

An example of bad publicity as it pertains to OB (organizational behavior) is "a negative article about the offense" The correct option is (b).

This can be damaging to the company's reputation and can lead to a loss of trust from customers, stakeholders, and employees. Negative publicity can have a significant impact on the company's bottom line as well as its ability to attract and retain talent.

Additionally, the cost of lost wages can also be an example of bad publicity as it can reflect poorly on the company's compensation and benefits practices. This can lead to low morale and high turnover rates, which can ultimately harm the company's performance.

In order to mitigate the effects of bad publicity, companies should prioritize communication, transparency, and accountability. They should also be proactive in addressing negative feedback and taking steps to improve their organizational culture and practices. By doing so, they can help to rebuild trust and maintain a positive reputation in the eyes of their stakeholders.

Therefore, the correct answer is an option B.

For more such questions on OB:

https://brainly.com/question/30459176

#SPJ11

Answer:

Q = mcΔT

Where:

Q is the heat energy transferred

m is the mass of the water

c is the specific heat capacity of water

ΔT is the change in temperature

First, let's calculate the heat energy required to raise the temperature of the water:

Q = mcΔT

m = 150 kg (since 1 liter of water is approximately equal to 1 kg)

c = 4186 J/kg°C (specific heat capacity of water)

ΔT = 70°C - 15°C = 55°C

Q = (150 kg) * (4186 J/kg°C) * (55°C)

Q = 346,185,000 J

Now, let's calculate the time using the power of the electric immersion heater:

P = W/t

P = 3000 W (power of the heater)

We can rearrange the formula to solve for time:

t = W/P

t = Q/P

t = (346,185,000 J) / (3000 W)

t ≈ 115,395 seconds

Techniques that are often combined to create more detailed and accurate maps of the universe. The resulting maps provide valuable insights into the evolution, structure, and properties of the universe.

Astronomers create three-dimensional maps of the universe using various techniques, including:

1. Redshift surveys: Astronomers measure the redshift of galaxies to determine their distance and velocity. The redshift is caused by the expansion of the universe, which stretches the wavelength of light from distant objects. By measuring the redshift of many galaxies, astronomers can create a three-dimensional map of the large-scale structure of the universe.

2. Cosmic microwave background radiation (CMB) surveys: The CMB is the oldest light in the universe, and it provides a snapshot of the early universe when it was only 380,000 years old. Astronomers use specialized telescopes to measure the temperature and polarization of the CMB to study the structure and history of the universe.

3. Gravitational lensing: Massive objects like galaxies and clusters of galaxies can bend and distort the light from more distant objects behind them, creating a magnifying effect. By studying the distortions in the light, astronomers can map the distribution of dark matter, which is invisible but exerts a gravitational force.

4. Galaxy surveys: Astronomers can also create three-dimensional maps of the universe by cataloging the positions and properties of large numbers of galaxies. By studying the distribution of galaxies, astronomers can infer the large-scale structure of the universe and the distribution of dark matter.

To know more about Redshift surveys refer here

https://brainly.com/question/24078282#

#SPJ11

The tension in the left wire is 29.4 N, and the tension in the right wire is 73.5 N.

To find the tension in the wires, we can use the principle of equilibrium. The sum of the forces in the x-direction must be zero since the shelf is not moving horizontally. The weight of the shelf and the tool act downwards, and the tensions in the wires act upwards.

Let's call the angle between the ceiling and the horizontal θ. The weight of the shelf and the tool is W = (70.0 N + 20.0 N) = 90.0 N. The weight can be split into components perpendicular and parallel to the ceiling:

The tension in the left wire can be split into components parallel and perpendicular to the ceiling:

The tension in the right wire can also be split into components parallel and perpendicular to the ceiling:

Now we can write the equilibrium equations:

Solving for T₁ and T₂ gives:

To know more about the Wire, here

https://brainly.com/question/14637128

#SPJ4

The rate of change of the water depth when the water depth is 2 ft is approximately -0.85 ft/min.

To find the rate of change of the water depth when the water depth is 2 ft in an inverted conical water tank with a height of 18 ft and a radius of 9 ft, being drained through a hole in the vertex at a rate of 8 ft^3, follow these steps:

1. Set up the proportions for the similar triangles formed by the water and the tank itself. Since the tank height is 18 ft and the radius is 9 ft, we can represent the current water depth as h and the current water radius as r.

  h / 18 = r / 9

2. Solve for r in terms of h.

  r = (9 / 18) * h = (1 / 2) * h

3. Calculate the volume of the water in the tank as a function of h, using the formula for the volume of a cone: V = (1/3)πr^2h.

  V = (1/3)π[(1/2) * h]^2 * h

4. Simplify the expression for the volume.

  V = (1/3)π(1/4) * h^3

5. Find the derivative of the volume with respect to time (dV/dt) using the Chain Rule.

  dV/dt = (3/4)π * h^2 * dh/dt

6. Plug in the given values: dV/dt = -8 ft^3/min (negative because the volume is decreasing) and h = 2 ft. Solve for dh/dt, the rate of change of the water depth.

  -8 = (3/4)π * (2^2) * dh/dt

7. Solve for dh/dt.

  dh/dt = -8 / [(3/4)π * 4]

8. Calculate the final value for dh/dt.

  dh/dt ≈ -0.85 ft/min

To know more about water depth refer here

https://brainly.com/question/29156782#

#SPJ11

The average current in a 120 V power line to a house is typically around 15 amps, give or take a few amps depending on the power consumption of the household.

The average current in a 120 V power line to a house can vary depending on the power consumption of the household. However, we can use Ohm's law to calculate an estimate of the current. Ohm's law states that current is equal to voltage divided by resistance (I = V/R). In this case, we can assume that the resistance is equal to the resistance of the wiring, which is typically very low.

Using this formula, we can calculate the current as I = 120 V / R. The value of R can vary depending on the size and type of wiring used, but for residential wiring, it is typically around 0.1 ohms.

Therefore, I = 120 V / 0.1 ohms = 1200 amps.

However, it's important to note that this calculation assumes a very low resistance in the wiring and doesn't take into account the actual power consumption of the household. In reality, the current will vary based on the power being consumed by the appliances in the house.

In practice, the current will typically be much lower, usually in the range of 10-20 amps for an average household. It's important to note that the current can still spike much higher than this during power surges or when large appliances are turned on.

To learn more about power line

https://brainly.com/question/28430509

#SPJ4

The period of a simple pendulum of length 1m on a massive planet is 1 sec. The acceleration due to gravity on that planet is 39.48 m/s^2.

A simple pendulum's period is given by:

T = 2π √(L/g)

Where T is the pendulum's period, L is its length, and g is the acceleration due to gravity.

In this scenario, the pendulum's period is one second and its length is one metre.

So, from above equation, we have:

1 = 2π √(1/g)

Squaring both sides, we get:

1^2 = (2π)^2 (1/g)

Simplifying, we get:

g = (4π^2)/1 = 39.48 m/s^2

Therefore, the acceleration due to gravity on the massive planet is 39.48 m/s^2.

For more such questions on simple pendulum, click on:

https://brainly.com/question/26449711

#SPJ11

The mass of Deimos is approximately 9.52 x 10^15 kg.

To find the mass of Deimos, we can use the formula for gravitational force:F = G * (m1 * m2) / r^2. where F is the gravitational force between two objects, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between their centers of mass.

In this problem, we know the radius of Deimos (r = 6.3 km = 6.3 x 10^3 m), the mass of the rock on its surface (m1 = 3.0 kg), and the gravitational force between them (F = 2.5 x 10^-2 N). We can also look up the value of G: G = 6.674 x 10^-11 N(m/kg)^2.

We want to solve for the mass of Deimos (m2). Rearranging the formula, we get: m2 = (F * r^2) / (G * m1). Substituting the given values, we get: m2 = (2.5 x 10^-2 N) * (6.3 x 10^3 m)^2 / (6.674 x 10^-11 N(m/kg)^2 * 3.0 kg). m2 = 9.52 x 10^15 kg.Therefore, the mass of Deimos is approximately 9.52 x 10^15 kg.

It is worth noting that this calculation assumes that the rock on Deimos' surface is not affecting its orbit significantly. In reality, the gravitational force between the rock and Deimos would cause some perturbations in Deimos' orbit, but they are likely to be very small due to the small mass of the rock compared to Deimos.

For more such question on mass visit:

https://brainly.com/question/30400740

#SPJ11

To find the mass of Deimos, we can use the gravitational force formula:
F = G * (m1 * m2) / r^2

Where F is the gravitational force (2.5 * 10^(-2) N), G is the gravitational constant (6.674 * 10^(-11) Nm^2/kg^2), m1 is the mass of Deimos (which we want to find), m2 is the mass of the rock (3.0 kg), and r is the distance between their centers, which is equal to Deimos' radius (6.3 km or 6300 m).

Rearranging the formula to solve for m1 (the mass of Deimos):

m1 = (F * r^2) / (G * m2)

m1 = (2.5 * 10^(-2) N * (6300 m)^2) / (6.674 * 10^(-11) Nm^2/kg^2 * 3.0 kg)

After calculating, we find that the mass of Deimos is approximately 1.0 * 10^15 kg.

For more questions on: force

https://brainly.com/question/12785175

#SPJ11

The sound wave moved at a speed of about 170.59 m/s.

Echoes. An echo is a sound that is reproduced when sound waves are reflected back. Sound waves can also reflect off smooth, hard surfaces, much to way a rubber ball does. The echo sounds the same as the original sound, despite the fact that the sound's direction changes.

Time for sound to reach the mountain and bounce back = 2 x 1.7 s = 3.4 s

The distance traveled by the sound wave is twice the distance between the hiker and the mountain, so:

Distance = (580 m x 2 x 290 m)

Using the formula:

Speed = Distance / Time

we get:

Speed = 580 m / 3.4 s = 170.59 m/s

To know more about speed visit:-

https://brainly.com/question/28224010

#SPJ1

A plane mirror is a flat mirror that produces an image that is equal in size to the object being reflected. The most notable feature of a plane mirror is that it produces an image that is a virtual, or exact, replica of the object.

This is because a plane mirror reflects light in a way that preserves the orientation of the object, meaning the image appears as a mirror image of the object. For example, if someone is facing a plane mirror, the image of the person will appear to be facing the opposite direction.

The image produced by a plane mirror is also reversed from left to right. This means that if someone raises their left arm in front of the mirror, their reflected image will appear to raise their right arm. However, the image formed by a plane mirror preserves the size, shape, and color of the object. This means that the reflected image will appear to be the exact same size, shape, and color as the object being reflected. Additionally, the image will appear to be the same distance from the mirror as the object is from the mirror.

Know more about image here

https://brainly.com/question/25029470#

#SPJ11

The true statement is "The PGF acting on the wind was stronger yesterday than today because the pressure gradient was larger yesterday". Option 1 is correct.

The pressure gradient force (PGF) is the force that drives air from high-pressure areas to low-pressure areas. It is proportional to the pressure gradient, which is the change in pressure over a given distance.

Yesterday, the pressure changed by 5 mb over a distance of 75 km, so the pressure gradient was 5 mb/75 km = 0.067 mb/km. Today, the pressure changed by 5 ml over a distance of 105 km, so the pressure gradient was 5 ml/105 km = 0.048 ml/km.

Since the pressure gradient was larger yesterday, the PGF acting on the wind was stronger yesterday than today. This means that the wind would have been driven more forcefully yesterday than today, assuming all other factors remained constant.

To learn more about pressure gradient, here

https://brainly.com/question/30463106

#SPJ4

The complete question is:

Yesterday, the pressure surrounding your location changed by 5 mb over a horizontal distance of 75 km. today, it changes by 5 ml over a horizontal distance of 105 km. choose the true statement.

The effective external resistance of the circuit is 3.5 ohms, the current in the circuit is 1.71 A, the lost voltage in the battery is 1.285 V, and the current in one of the 3-ohm resistors is 1.71 A.

To solve this problem, we can use Kirchhoff's circuit laws and Ohm's law.

First, let's calculate the equivalent resistance of the parallel combination of two 3-ohm resistors:

1/Rp = 1/3 + 1/3

Rp = 1.5 ohm

Now, let's calculate the total external resistance of the circuit:

R = 2 + Rp

R = 2 + 1.5

R = 3.5 ohm

Using Ohm's law, we can calculate the current in the circuit:

V = IR

I = V/R

I = 6/3.5

I = 1.71 A

The lost voltage in the battery is given by:

VL = E - Ir

VL = 23 - 1.711.5

VL = 1.285 V

The current in one of the 3-ohm resistors is the same as the current in the circuit:

I = 1.71 A

Learn more about resistors and resistance at: https://brainly.com/question/29635283

#SPJ1

Complete question:

A battery Of 3 cells is arranged in series each of emf 2V and internal resistance of 0.5-ohm and connected to a 2-ohm resistor.

In a series with a parallel combination of two 3-ohm resistors,

The volleyball with a mass of 2100 g and a velocity of 30 m/s will have a kinetic energy of  945 Joules.

1. Mass: It refers to the amount of matter in an object. In this case, the volleyball has a mass of 2100 g, which we need to convert to kg (1 kg = 1000 g), so the mass is 2.1 kg.

2. Velocity: It is the rate of change of an object's position, including both speed and direction. In this example, the velocity of the volleyball is 30 m/s.

3. Kinetic Energy: It is the energy an object possesses due to its motion. To calculate the kinetic energy of an object, we can use the formula: KE = (1/2)mv², where KE is kinetic energy, m is mass, and v is velocity.

To calculate the kinetic energy of the volleyball:

1. Convert the mass of the volleyball to kg.
Mass = 2100 g = 2100/1000 kg = 2.1 kg

2. Use the given velocity of the volleyball.
Velocity = 30 m/s

3. Apply the kinetic energy formula.
KE = (1/2)mv²
KE = (1/2)(2.1 kg)(30 m/s)²

4. Calculate the kinetic energy.
KE = 0.5 * 2.1 kg * (900 m^2/s²) = 945 J (Joules)

In conclusion, the volleyball you serve with a mass of 2100 g and a velocity of 30 m/s has a kinetic energy of 945 Joules.

Learn more about velocity at: https://brainly.com/question/10425898

#SPJ11

Answer:

Approximately [tex]0.21\; {\rm m}[/tex].

(Assuming that [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex].)

Explanation:

As the bottle cap slows down, it lost kinetic energy [tex](\text{KE})[/tex]: [tex]\Delta \text{KE} = (1/2)\, m\, (u^{2} - v^{2})[/tex], where [tex]m[/tex] is the mass of the cap, [tex]v = 1.0\; {\rm m\cdot s^{-1}}[/tex], and [tex]u = 2.0\; {\rm m\cdot s^{-1}}[/tex].

The amount of kinetic energy lost should also be equal to the sum of:

Let [tex]d[/tex] denote the distance that the cap has travelled along the ramp. The height of the cap would have increased by:

[tex]\Delta h = d\, \sin(\theta)[/tex], where [tex]\theta = 20^{\circ}[/tex] is the angle of elevation of the ramp.

The [tex]\text{GPE}[/tex] of the cap would have increased by:

[tex]\Delta \text{GPE} = m\, g\, \Delta h = m\, g\, d\, \sin(\theta)[/tex].

To find the friction on the cap, it will be necessary to find the normal force that the ramp exerts on the cap.

Let [tex]\theta = 20^{\circ}[/tex] denote the angle of elevation of this ramp. Decompose the weight of the cap [tex]m\, g[/tex] (where [tex]m[/tex] is the mass of the cap) into two directions:

The normal force on the cap is entirely within the tangential direction.

Since the cap is moving along the ramp, there would be no motion in the tangential direction. Forces in the tangential direction should be balanced. Hence, the normal force on the cap will be equal in magnitude to the weight of the cap in the tangential direction: [tex]F_{\text{normal}} = m\, g\, \cos(\theta)[/tex].

Since the cap is moving, multiply the normal force on the cap by the coefficient of kinetic friction [tex]\mu_{\text{k}}[/tex] to find the friction [tex]f[/tex] between the ramp and the cap:

[tex]f = \mu_{\text{k}}\, F_{\text{normal}}[/tex].

After a distance of [tex]x[/tex] along the ramp, friction would have done work of magnitude:

[tex]\begin{aligned} (\text{work}) &= f\, s \\ &= (\mu_{\text{k}}\, F_{\text{normal}})\, (d) \\ &= \mu_{\text{k}}\, m\, g\, \cos(\theta)\, d\end{aligned}[/tex].

Overall:

[tex]\begin{aligned} \Delta \text{KE} &= \Delta \text{GPE} + \mu_{\text{k}}\, m\, g\, \cos(\theta)\, d \\ &= m\, g\, \sin(\theta)\, d + \mu_{\text{k}}\, m\, g\, \cos(\theta)\, d \\ &= m\, g\, (\sin(\theta) + \mu_{\text{k}}\, \cos(\theta))\, d\end{aligned}[/tex].

At the same time:

[tex]\Delta \text{KE} = (1/2)\, m\, (v^{2} - u^{2})[/tex].
Therefore:

[tex]\displaystyle \frac{1}{2}\, m\, (v^{2} - u^{2}) = m\, g\, (\sin(\theta) + \mu_{\text{k}}\, \cos(\theta))\, d[/tex].

[tex]\begin{aligned}d &= \frac{m\, (u^{2} - v^{2})}{2\, m\, g\, (\sin(\theta) + \mu_{\text{k}}\, \cos(\theta))} \\ &= \frac{u^{2} - v^{2}}{2\, g\, (\sin(\theta) + \mu_{\text{k}}\, \cos(\theta))} \\ &= \frac{(2.0)^{2} - (1.0)^{2}}{2\, (9.81)\, (\sin(20^{\circ}) + 0.40\, \cos(20^{\circ}))}\; {\rm m} \\ &\approx0.21\; {\rm m}\end{aligned}[/tex].

Answer:

1.  0.102 mol/kg.

2. 0.444 mol/kg.

Explanation:

To calculate molality, we need to know the moles of solute (NaCl) and the mass of the solvent (water) in kilograms. First, we need to convert the mass of NaCl to moles by dividing by its molar mass. Then we convert the mass of water to kilograms. Molality (m) is equal to moles of solute divided by kilograms of solvent.

First, we need to convert the mass of glucose to moles by dividing by its molar mass. Then we convert the volume of water to kilograms. Molality (m) is equal to moles of solute divided by kilograms of solvent. Finally, we need to round the answer to three significant figures.

Answer: What is the main cause of the increase in carbon dioxide in our atmosphere?

The main cause of the increase in carbon dioxide in our atmosphere is the burning of fossil fuels, such as coal, oil, and gas. When these fuels are burned, carbon dioxide is released into the atmosphere, which can have negative effects on our climate and oceans. This increase in carbon dioxide is caused by human activities, and it may jeopardize life on the planet if we do not take action to reduce our reliance on fossil fuels.

Explanation: very long /:

The resonances in a tube driven by a speaker are determined by the length and properties of the tube. The presence of resonances at specific frequencies indicates that the tube is supporting standing waves at those frequencies.

In this case, the tube displays resonances at 450 Hz and 600 Hz, with no resonances in between. The fundamental frequency, which is the lowest resonant frequency, is found to be 150 Hz.

To understand the boundary conditions on the tube, we can use the concept of open and closed ends of a tube.

1. Open End: An open end of a tube corresponds to a displacement antinode (maximum amplitude) for a standing wave. At an open end, the air particles in the tube are free to move, resulting in zero pressure points and maximum amplitude of motion.

2. Closed End: A closed end of a tube corresponds to a displacement node (minimum amplitude) for a standing wave. At a closed end, the air particles in the tube cannot move, resulting in maximum pressure points and minimum amplitude of motion.

Given that the tube displays resonances at 450 Hz and 600 Hz with no resonances in between, we can infer the following boundary conditions on the tube:

1. The tube has an open end at one side and a closed end at the other side. This configuration allows for the fundamental frequency (150 Hz) to be supported since it requires a displacement node at the closed end and a displacement antinode at the open end.

2. The first harmonic (450 Hz) corresponds to a displacement node at the closed end and a displacement antinode at the open end.

3. The second harmonic (600 Hz) corresponds to a displacement node at the closed end and a displacement antinode at the open end.

In summary, the boundary conditions on the tube can be described as an open-closed tube configuration, where one end is open and the other end is closed. This configuration allows for the fundamental frequency and harmonics at 450 Hz and 600 Hz to be supported.

To know more about resonances refer here

https://brainly.com/question/31781948#

#SPJ11

The minimum runway length required for this airplane to reach the required speed for takeoff is 193.41 meters.

(a) To determine if the airplane can reach the required speed for takeoff on a 150m long runway, we can use the equation: v^2 = u^2 + 2as. Here, v is the final speed (27.8 m/s), u is the initial speed (0 m/s, assuming the plane starts from rest), a is the acceleration (2.00 m/s^2), and s is the distance (150m).

27.8^2 = 0^2 + 2(2.00)(150)
773.64 = 600

Since 773.64 > 600, this airplane cannot reach the required speed for takeoff on a 150m long runway.

(b) To find the minimum runway length required for this airplane to take off, we can rearrange the equation: s = (v^2 - u^2) / 2a.

s = (27.8^2 - 0^2) / (2 * 2.00)
s = 773.64 / 4
s = 193.41m

So, the minimum runway length required for this airplane to reach the required speed for takeoff is 193.41 meters.

To know more about speed, refer here:

https://brainly.com/question/19127881#

#SPJ11

Answer:

One cell can divide into two new cells. This is called mitosis. The process of cell division goes through various stages. First the cell nucleus divides into two. A new cell surface membrane then severs the cell divides. The two new cells are called daughter cells and they are small. They will grow larger. they grow by getting nutrients from the food that is eaten. Once they grow to full size they can also reproduce or divide. If cells divide more quickly than they should, or divide in the wrong way, diseases may develop.

Explanation:

Hope that helped

To determine the frictional torque of the engine's bearings by graphing the data, we need to select appropriate variables to plot on each axis that will produce a straight-line graph with a slope related to the frictional torque.

We know that the frictional torque is directly proportional to the frictional force acting on the bearings. Therefore, one of the variables we should plot on the y-axis is the frictional force. The frictional force is usually measured using a load cell or a torque sensor.

On the other hand, the other variable we should plot on the x-axis is the rotational speed of the engine. The rotational speed of the engine can be measured using a tachometer or a frequency counter.

The reason we choose these two variables is that the frictional force acting on the bearings usually increases linearly with the rotational speed of the engine.

Therefore, plotting the frictional force against the rotational speed of the engine should produce a straight-line graph with a slope related to the frictional torque.

Once we have obtained the straight-line graph, we can calculate the frictional torque by finding the slope of the graph.

The slope of the graph represents the change in the frictional force per unit change in the rotational speed of the engine. Therefore, the slope of the graph can be multiplied by the radius of the bearings to obtain the frictional torque.

In conclusion, to determine the frictional torque of the engine's bearings by graphing the data, we should plot the frictional force against the rotational speed of the engine, as this should produce a straight-line graph with a slope related to the frictional torque.

To know more about frictional torque refer here

https://brainly.com/question/30021872#

#SPJ11

TimeTime when energy stored in the capacitor will be half of its initial value=7.3s

To find the time at which the energy stored in the capacitor will be half of its initial value, we can use the formula for the time constant (τ) of an RC circuit and the fact that energy is halved when the voltage across the capacitor is reduced to 1/√2 of its initial value.

The time constant (τ) of the RC circuit is given by τ = R * C, where R is the resistance and C is the capacitance.

τ = (1.3 * 10^6 Ω) * (8.1 * 10^-6 F) = 10.53 seconds

Now, we can use the formula for discharging a capacitor: V(t) = V_initial * e^(-t/τ)

We need to find the time (t) when V(t) = V_initial / √2. So:

V_initial / √2 = V_initial * e^(-t/10.53)

Divide both sides by V_initial:

1 / √2 = e^(-t/10.53)

Take the natural logarithm of both sides:

-ln(√2) = -t / 10.53

Now, solve for t:

t = 10.53 * ln(√2) ≈ 7.3 seconds

So, the energy stored in the capacitor will be half of its initial value at approximately 7.3 seconds.

Visit https://brainly.com/question/29301875 to learn more about capacitors

#SPJ11

The equation is a nonlinear equation with a mix of t and v terms.

To find how long the rocket must fire before the sled travels 2000 meters, we need to solve the given equation of motion: 6v˙ = 2700 - 24v. Since the sled starts from rest, its initial velocity (v0) is 0.

First, we need to find the velocity as a function of time. Divide both sides of the equation by 6:

v˙ = (2700 - 24v) / 6

Integrate both sides with respect to time (t):

∫v˙ dt = ∫(450 - 4v) dt

v(t) = 450t - 2v^2 + C

Since the sled starts from rest, when t = 0, v(0) = 0. This allows us to find the constant C:

0 = 450(0) - 2(0)^2 + C

C = 0

So, the velocity equation becomes:

v(t) = 450t - 2v^2

Now, we need to find the position equation by integrating the velocity equation:

∫(450t - 2v^2) dt = ∫(450t - 2(450t - 2v^2)^2) dt

s(t) = 225t^2 - (2/3)v^3 + D

Since the sled starts from rest and has not yet moved, when t = 0, s(0) = 0, which allows us to find the constant D:

0 = 225(0)^2 - (2/3)(0)^3 + D

D = 0

So, the position equation becomes:

s(t) = 225t^2 - (2/3)v^3

We need to find the time t when s(t) = 2000:

2000 = 225t^2 - (2/3)v^3

This equation is a nonlinear equation with a mix of t and v terms. Unfortunately, it does not have an analytical solution, so it would need to be solved using numerical methods such as the Newton-Raphson method or by using a software or calculator with numerical equation-solving capabilities.

To learn more about velocity, refer below:

https://brainly.com/question/17127206

#SPJ11

The amount of heat transferred to the wooden beam is 2,040,000 Joules.

During the course of a hot, summer day, the temperature of the wooden beam slowly increases from 15°C at night to a final temperature of 35°C during the day.

To calculate the amount of heat transferred to the wooden beam with a mass of 60kg, follow these steps:

Step 1: Determine the temperature change (∆T)

∆T = [tex]T_{final} - T_{initial}[/tex]

∆T = 35°C - 15°C

∆T = 20°C

Step 2: Find the specific heat capacity (c) of the wooden beam

The specific heat capacity of wood varies depending on its type. For this example, let's use an average specific heat capacity of wood, which is approximately 1700 J/(kg·K).

Step 3: Calculate the amount of heat transferred (Q) using the formula:

Q = mc∆T

where

m is the mass of the wooden beam,

c is the specific heat capacity of wood, and

∆T is the temperature change.

Step 4: Plug in the values and solve for Q

Q = (60 kg)(1700 J/(kg·K))(20 K)

Q = 2,040,000 J

Therefore, the amount of heat transferred to the wooden beam is 2,040,000 Joules.

To know more about temperature refer here

brainly.com/question/11464844#

#SPJ11

The sample will move very slowly in the opposite direction of the applied magnetic field, but it will eventually come to a stop when it reaches equilibrium.

Diamagnetic materials, unlike ferromagnetic or paramagnetic materials, do not possess any permanent magnetic moment or net magnetic dipole moment. The magnetic force acting on the diamagnetic material is perpendicular to its velocity, and hence it cannot accelerate the material along the direction of the magnetic field.

Since the sample is made of diamagnetic material, it will have a very weak and temporary magnetic moment induced in it when placed in a magnetic field. This induced magnetic moment will be in the opposite direction to the applied magnetic field. Therefore, the sample will experience a force in the direction opposite to the applied magnetic field. However, this force will be very weak since the diamagnetic material has a weak magnetic susceptibility.

To know more about diamagnetic materials, click here

https://brainly.com/question/30320581

#SPJ11

Answer:The student should put time (in seconds or minutes) on the x-axis of her graph, since she measured the distance the car traveled at specific time intervals (every 20 seconds) for a total duration of 2 minutes.

Explanation:

In the process of making pancakes, the three steps that best show that new substances are created are: Steps 3, 4, and 5. The correct option is B.

These steps involve seeing bubbles form as the pancake starts to harden, waiting until the bubbles stop forming, and flipping the pancake so the other side can darken and harden.

During Step 3, the formation of bubbles indicates a chemical reaction taking place, as the heat causes the pancake batter to release carbon dioxide gas. This leads to the creation of a new substance: the cooked pancake. Step 4, waiting for the bubbles to stop forming, further demonstrates the chemical changes occurring as the batter continues to cook and transform.

Lastly, in Step 5, flipping the pancake allows the other side to darken and harden, completing the cooking process and solidifying the new substance: a fully cooked pancake. The correct option is B.

To know more about substances, refer here:

https://brainly.com/question/30667005#

#SPJ11

The average potential difference across the coil is: 9 × 10⁻³ volts or 9 millivolts when the magnetic field strength changes as described.

To find the average potential difference, we can use Faraday's law of electromagnetic induction, which states that the induced electromotive force (EMF) in a coil is equal to the rate of change of magnetic flux through the coil. The formula for Faraday's law is:

EMF = -N × (ΔΦ/Δt)

where EMF is the induced electromotive force, N is the number of turns in the coil, ΔΦ is the change in magnetic flux, and Δt is the time interval.

First, we need to convert the cross-sectional area from cm² to m²:

1000 cm² × (1 m / 100 cm)² = 0.1 m²

Next, we calculate the change in magnetic flux:

ΔΦ = (10^-4 Wb/m³ - 10^-3 Wb/m²) × 0.1 m² = -9 × 10⁻⁵ Wb

Now, we can plug the values into Faraday's law formula:

EMF = -100 × (-9 × 10⁻³ Wb / 0.1 s) = 9 × 10⁻³ V

Therefore, the average potential difference across the coil is 9 × 10⁻³volts or 9 millivolts when the magnetic field strength changes as described.

To know more about potential difference, refer here:

https://brainly.com/question/24142403#

#SPJ11

1. The four criteria for assessing a change in a system are environmental impact, economic impact, social impact, and technical feasibility.

Environmental impact: The use of electric toothbrushes may have a negative environmental impact due to the need for electricity to power them. However, if the electricity is generated from renewable sources, the impact may be minimal.

Economic impact: The cost of electric toothbrushes may be higher than manual toothbrushes, which may put a financial burden on some people. However, electric toothbrushes may also have a longer lifespan and require less frequent replacement, which may offset the initial cost.

Social impact: The use of electric toothbrushes may be seen as a status symbol, which may create social inequalities. Additionally, some people may prefer the feeling of a manual toothbrush, which may lead to resistance to the change.

Technical feasibility: The technology for electric toothbrushes already exists and is widely available, so this change is technically feasible.

2. Two methods of support used to keep a system operating safely and efficiently are maintenance and troubleshooting. Maintenance involves regularly checking and repairing components of the system to prevent breakdowns and ensure optimal performance. Troubleshooting involves identifying and resolving problems that arise during the operation of the system.

3.

a) The mechanical advantage of this pulley system is equal to the weight lifted divided by the force applied. In this case, the weight lifted is 500 N and the force applied is 100 N, so the mechanical advantage is 5.

b) The input that Marina did on the rope is equal to the force she applied multiplied by the distance she pulled the rope. In this case, the force is 100 N and the distance is 9.0 m, so the input is 900 J.

c) The useful output that the rope did on the weight is equal to the weight lifted multiplied by the distance it was lifted. In this case, the weight lifted is 500 N and the distance is 1.5 m, so the useful output is 750 J.

d) The efficiency of the pulley system is equal to the useful output divided by the input, multiplied by 100% to express the result as a percentage. In this case, the useful output is 750 J and the input is 900 J, so the efficiency is 83.3%.