The work done on the block is W = (20 N)(5.0 m)(1) = 100 J.
If the block is moving at a constant speed, then the net force acting on it must be zero. The force of friction acting on the block must therefore be equal in magnitude and opposite in direction to the applied force.
Since the force of friction is opposing the motion of the block, the work done by the force of friction is negative. The work done by the applied force is positive.
The formula for work is given by W = Fd cos(theta), where W is the work done, F is the force applied, d is the displacement of the object, and theta is the angle between the force and the displacement.
In this case, the angle between the force and the displacement is 0 degrees (since the force is applied in the same direction as the displacement), so cos(theta) = 1.
Thus, the work done on the block is W = (20 N)(5.0 m)(1) = 100 J.
To know more about force of friction, refer here:
https://brainly.com/question/14662717#
#SPJ11
Calculate and compare the gravitational force and the electrical force between two protons that are separated by 4. 25x 10 -15 m (G = 6. 67 x 10 -11 Nm 2 /kg 2 , e = 1. 60 x 10 -19 C, m p = 1. 67 x 10 -27 kg)
The electrical force is approximately [tex]10^{43}[/tex] times larger than the gravitational force. This is because the electrical force is much stronger than the gravitational force, due to the large difference in the strength of the fundamental forces involved.
To calculate the gravitational force between two protons, we use the equation:
[tex]F_g = G * (m_p)^2 / r^2[/tex]
where
G is the gravitational constant,
[tex]m_p[/tex] is the mass of a proton, and
r is the distance between the centers of the two protons.
Plugging in the values given, we get:
[tex]F_g = 6.67 * 10^-11 Nm^2/kg^2 * (1.67 * 10^-27 kg)^2 / (4.25 * 10^-15 m)^2[/tex]
[tex]= 1.72 x 10^{-51} N[/tex]
To calculate the electrical force between the protons, we use the equation:
[tex]F_e = k * (q_p)^2 / r^2[/tex]
where
k is the Coulomb constant,
[tex]q_p[/tex] is the charge of a proton, and
r is the distance between the centers of the two protons.
Plugging in the values given, we get:
[tex]F_e = 9 *10^9 Nm^2/C^2 * (1.6 * 10^-19 C)^2 / (4.25 * 10^-15 m)^2[/tex]
= 2.32 x [tex]10^{-8}[/tex] N
Comparing the two forces, we see that the electrical force is much larger than the gravitational force. The electrical force is approximately [tex]10^{43[/tex]times larger than the gravitational force.
This is because the electrical force is much stronger than the gravitational force, due to the large difference in the strength of the fundamental forces involved.
To know more about gravitational force refer here
brainly.com/question/12528243#
#SPJ11
A distance of 1.0 × 10–2
meter separates successive
crests of a periodic wave produced in a shallow tank
of water. If a crest passes a point in the tank every 4.0
× 10–1
second, what is the speed of this wave?
The the speed of this wave is 2.5 × 10^−2 m/s.
How do you calculate the speed of wave?To calculate the speed of wave, we use the formula v = λ/T.
v = 1.0 × 10^-2 ÷ 4.0 × 10^-1
v = 0.025 ⇒ 2.5 × 10^−2 m/s.
The answer give is dependent of the correct figures below;
A distance of 1.0 × 10^−2 meter separates successive crests of a periodic wave produced in a shallow tank of water. If a crest passes a point in the tank every 4.0 × 10^−1 second, what is the speed of this wave?
Find more exercises on speed of wave;
https://brainly.com/question/10715783
3SPJ1
A conical tank has height 3 m and radius 2 m at the top. water flows in at a rate of 1.1m3/min. how fast is the water level rising when it is 1.7 m
The water level is rising at a rate of approximately 0.27 m/min when it is 1.7 m.
To solve this problem, we need to use the formula for the volume of a cone:
V = (1/3)πr^2h
where V is the volume, r is the radius, and h is the height of the cone.
We can differentiate this formula with respect to time to find the rate of change of the volume:
dV/dt = (1/3)π(2r)(dr/dt)h + (1/3)πr^2(dh/dt)
where dr/dt is the rate of change of the radius and dh/dt is the rate of change of the height.
We are given that water flows in at a rate of 1.1m3/min, which means that dV/dt = 1.1. We are also given the height of the water level, h = 1.7 m.
To find the rate of change of the height, dh/dt, we need to solve for dr/dt using the given values of r and h:
r/h = 2/3
r = (2/3)h
Substituting this into the formula for the volume of a cone, we get:
V = (1/3)π(4/9)h^3
Differentiating this formula with respect to time, we get:
dV/dt = (4/9)πh^2(dh/dt)
Substituting the given values of dV/dt and h, we get:
1.1 = (4/9)π(1.7)^2(dh/dt)
Solving for dh/dt, we get:
dh/dt = 1.1/((4/9)π(1.7)^2) ≈ 0.27 m/min
To know more about the water level, click here;
https://brainly.com/question/17750427
#SPJ11
Under what conditions (plural) could you expect to conductors to actually conduct? When will they stop conducting
Conductors conduct electricity when there's an electric field, availability of free electrons, and they are within an appropriate temperature range. They stop conducting when these conditions are not met, such as in the absence of an electric field, insufficient free electrons, extremely high temperatures, or when they transition to a superconductor state.
Conductors are materials that allow the flow of electric current due to the movement of free electrons. They typically have low resistance to electric current flow. Some common conductors include metals such as copper, aluminum, and silver.
Conditions for conductors to actually conduct:
1. Presence of an electric field: Conductors need an electric field or potential difference to initiate the flow of electric current.
2. Availability of free electrons: Conductors must have a sufficient number of free electrons to conduct electricity.
3. Adequate temperature range: Conductors must be within a suitable temperature range, as extremely high temperatures can impact their conductivity.
Conditions when conductors will stop conducting:
1. Absence of an electric field: If there's no electric field or potential difference, the conductors won't conduct electricity.
2. Insufficient free electrons: If a conductor lacks free electrons, it cannot facilitate the flow of electric current.
3. Extremely high temperatures: At very high temperatures, the resistance of conductors may increase significantly, hindering their ability to conduct electricity.
4. Transition to a superconductor state: In some materials, when cooled down to extremely low temperatures, they exhibit zero electrical resistance and become superconductors. In this state, they no longer behave as regular conductors.
Learn more about conductors at: https://brainly.com/question/492289
#SPJ11
Two ropes support a load of 478 kg. The two ropes are perpendicular to each other, and the tension in the first rope is 2. 2 times that of the second rope. Find the tension in the second rope. The acceleration of gravity is 9. 8 m/s 2. Answer in units of N
The tension in the second rope is approximately 809.44 N.
To solve this problem, we'll use the following terms: load, tension, perpendicular, ropes, and gravity.
Given that two ropes support a load of 478 kg, we can find the total force acting on the load due to gravity using F = m * g, where F is the force, m is the mass, and g is the acceleration due to gravity (9.8 m/s²).
F = 478 kg * 9.8 m/s² = 4684.4 N
Now, let T1 be the tension in the first rope, and T2 be the tension in the second rope. We're told that T1 = 2.2 * T2, and the ropes are perpendicular to each other.
Since the ropes are perpendicular, the sum of the horizontal and vertical components of the tensions must equal the total force:
T1^2 + T2^2 = F^2
Substitute T1 with 2.2 * T2:
(2.2 * T2)^2 + T2^2 = 4684.4^2
Now, solve for T2:
5.84 * T2^2 = 4684.4^2
T2^2 = (4684.4^2) / 5.84
T2 = sqrt((4684.4^2) / 5.84)
T2 ≈ 809.44 N
Therefore, the tension in the second rope is approximately 809.44 N.
To learn more about gravity, refer below:
https://brainly.com/question/31321801
#SPJ11
25. 0 kg dog is trapped on a rock in the middle of a narrow river. A 66. 0-kg rescuer has assembled a swing with negligible mass that she will use to swing down and catch the trapped dog at the bottom of her swing, and then continue swinging to the other side of the river. The ledge that the rescuer swings from is 5. 0 m above the rock, which is not high enough so the rescuer and dog together can reach the other side of the river, which is 3. 0 m above the rock. However, the rescuer can use a ladder to increase the height from which she swings. What is the minimum height of the ladder the rescuer must use so both dog and rescuer make it to the other side of the river? Assume that friction and air resistance are negligible
The minimum height of the ladder the rescuer must use is 29 meters above the ledge.
To solve this problem, we can use the conservation of energy principle. At the top of the swing, the total mechanical energy is equal to the potential energy due to the height of the swing. At the bottom of the swing, the total mechanical energy is equal to the potential energy due to the height of the swing plus the kinetic energy of the rescuer and dog.
Let H be the height of the ladder above the ledge, and let x be the distance between the rock and the point where the rescuer catches the dog at the bottom of the swing. Then we can set up the following equation:
mg(5+H) = (m+66)g3/2 + (m+66)gx
where m is the mass of the dog.
The left-hand side of the equation represents the initial potential energy of the system, which includes both the dog and the rescuer. The right-hand side represents the final energy of the system, which includes the kinetic energy of the rescuer and dog as they swing down to the bottom of the swing, and the potential energy of the system at that point.
Simplifying the equation, we get:
5mg + Hmg = 99mg/2 + 66mg/2 + xmg
Canceling the mass and gravity terms, we get:
5 + H = 99/2 + 33/2 + x
Simplifying further, we get:
H = x + 29
To learn more about Ladder
https://brainly.com/question/28636911
#SPJ4
A ball of mass 0.2kg travelling in the x direction at a speed of 0.5m/s collides with a ball of mass 0.3kg travelling in the y direction at a speed of 0.4m/s. the two balls stick together after the collision travelling at an tita to the x direction. what is the value of tita
The value of tita is approximately 32.4 degrees.
The momentum in the x direction before the collision is 0.2 kg * 0.5 m/s = 0.1 kgm/s. The momentum in the y direction before the collision is 0.3 kg * 0.4 m/s = 0.12 kgm/s. The total momentum before the collision is the vector sum of the momenta in the x and y direction, which is √(0.1^2 + 0.12^2) = 0.16 kg*m/s.
After the collision, the two balls stick together and move at an angle tita to the x direction. Let's call the velocity of the combined mass v. The total momentum after the collision is the mass of the combined balls multiplied by the velocity, which is (0.2 kg + 0.3 kg) * v = 0.5 kg * v.
Since momentum is conserved, the total momentum before the collision is equal to the total momentum after the collision: 0.16 kg*m/s = 0.5 kg * v. Solving for v, we get v = 0.32 m/s. We can find the angle tita using trigonometry. The x component of the velocity is v_x = v * cos(tita) and the y component of the velocity is v_y = v * sin(tita). So we have v_x / v_y = tan(tita). Plugging in the values, we get tan(tita) = (0.32 m/s) / 0.5 m/s, or tita = arctan(0.64) = 32.4 degrees.
To know more about the Direction, here
https://brainly.com/question/29508607
#SPJ4
A model rocket starting at rest is launched straight upward. The thrust provided by the engine accelerates the rocket upward at a rate of 4 m/s/s for 15 seconds before running out of fuel. Once out of fuel, the rocket continues moving upward for awhile before falling striaght down back to earth. The engine shuts off at 450 meters high and a velocity of 60 m/s.
What is the total time that the rocket is in the air?
What is the maximum altitude of the rocket after the engine shuts off?
The first time the rocket is 542 m above the ground will be____ after liftoff.
The second time the rocket is 542 m above the ground will be___after liftoff.
1. The total time is 38.56 s
2. maximum altitude of the rocket after the engine shuts off = 1367.35 m
Hiw to solve for the altitude
v = u + at = 0 + 4 m/s^2 * 15 s = 60 m/s
v^2 = u^2 + 2as
where s is the displacement. We can rearrange this equation to solve for the displacement:
s = (v^2 - u^2) / (2a) + h
where h is the initial height of the rocket (zero). Substituting the given values, we get:
s = (60 m/s)^2 / (2 * (-9.8 m/s^2)) + 450 m
= 1367.35 m
t = sqrt(2s/a) = sqrt(2*683.675 m / 9.8 m/s^2) = 11.78 s
Therefore, the total time that the rocket is in the air is twice this time, plus the 15 seconds when the engine is providing thrust:
total time = 2*11.78 s + 15 s = 38.56 s
Read more on total time here:https://brainly.com/question/30481593
#SPJ1
Tritium (hydrogen-3) undergoes radioactive decay to produce helium-3. which
particle needs to be added to this equation to show that the total numbers of
neutrons and protons are not changed by the reaction? marking brainliest! points
In the radioactive decay of tritium (hydrogen-3) to helium-3, a beta particle is involved to ensure that the total numbers of neutrons and protons remain unchanged.
The decay can be represented by the following equation:
¹H₃ (tritium) → ²He₃ (helium-3) + β⁻ (beta particle)
In this process, one neutron from tritium is converted into a proton, forming helium-3, and a beta particle (electron) is emitted to conserve the total number of neutrons and protons.
To learn more about electron, refer below:
https://brainly.com/question/1255220
#SPJ11
a 450.0-g block is attached to a spring of spring constant 45 n/m, and is in simple harmonic motion on a frictionless surface with an amplitude of 7.5 cm. a second identical block, moving at 12 m/s in line with the spring, strikes the first one when the spring is at its maximum extension. the two blocks stick together. what is the amplitude of the resulting oscillation?
The amplitude of the resulting oscillation is approximately 0.106 meters or 10.6 cm.
Before the collision:
- The first block
(mass m1 = 0.45 kg) is at its maximum extension
(amplitude A1 = 0.075 m) and has zero velocity.
-
The second block
(mass m2 = 0.45 kg) is moving at a velocity
v2 = 12 m/s and has no potential energy.
During the collision, the two blocks stick together
(mass m = m1 + m2 = 0.9 kg).
After the collision, the combined mass oscillates with a new amplitude A2.
Before collision:
- Mechanical energy of the system = Potential energy of the spring = (1/2)kA1^2
- Momentum of the system = m2 * v2
After collision:
- Mechanical energy of the system = Potential energy of the spring = (1/2)kA2^2
- Momentum of the system = m * v
Since mechanical energy and momentum are conserved:
- (1/2)kA1^2 = (1/2)kA2^2
- m2 * v2 = m * v
We know A1, m1, m2, and v2. We can solve the equations to find A2.
From the energy equation:
A2^2 = A1^2 * (m1 + m2) / m1 = (0.075^2) * (0.9 / 0.45) = 0.01125
A2 = sqrt(0.01125ou) ≈ 0.106 m
So, the amplitude of the resulting oscillation is approximately 0.106 meters or 10.6 cm.
To learn more about : Amplitude
https://brainly.com/question/3613222
#SPJ11
Answer:
85 cm
Explanation:
The speed of the blocks right after the collision is 6 m/s, so now we have an oscillator of mass 900.0 g with a speed of 6 m/s when x = 7.5 cm. The amplitude of this oscillator is 85 cm
It has been argued that power plants should make use of off-peak hours (such as late at night) to generate mechanical energy and store it until it is needed during peak load times, such as the middle of the day. one suggestion has been to store the energy in large flywheels spinning on nearly frictionless ball-bearings. consider a flywheel made of iron, with a density of 7800 kg/m3 , in the shape of a uniform disk with a thickness of 11.6 cm .part a
what would the diameter of such a disk need to be if it is to store an amount of kinetic energy of 13.7 mj when spinning at an angular velocity of 92.0 rpm about an axis perpendicular to the disk at its center?part b
what would be the centripetal acceleration of a point on its rim when spinning at this rate?
The diameter of the disk would need to be approximately 1.08 m to store 13.7 MJ of kinetic energy when spinning at 92.0 rpm. The centripetal acceleration of a point on the rim of the disk would be approximately 332.6 m/s².
The moment of inertia of a uniform disk rotating about an axis perpendicular to the disk through its center is given by the formula:
I = (1/2) * M * R²
where I is the moment of inertia, M is the mass of the disk, and R is the radius of the disk.
The mass of the disk can be calculated using its volume and density:
M = ρ * V =
= ρ * π * R² * h
where ρ is the density of the iron, π is the mathematical constant pi, R is the radius of the disk, and h is the thickness of the disk.
Substituting the given values, we get:
M = 7800 kg/m³ * π * (0.116 m/2)² * 0.116 m
M = 8.4 kg
The kinetic energy of the spinning disk can be calculated using the formula:
K = (1/2) * I * ω²
where K is the kinetic energy, I is the moment of inertia, and ω is the angular velocity of the disk.
Substituting the given values, we get:
13.7 MJ = (1/2) * (8.4 kg * (0.116 m/2)²) * (92.0 rpm * 2π/60)²
Solving for R, we get:
R = 0.539 m
The centripetal acceleration of a point on the rim of the disk can be calculated using the formula:
a = ω² * R
where a is the centripetal acceleration, ω is the angular velocity of the disk, and R is the radius of the disk.
Substituting the given values, we get:
a = (92.0 rpm * 2π/60)² * 0.539 m
a = 332.6 m/s²
To know more about angular velocity, here
brainly.com/question/30885221
#SPJ4
A motor vehicle generates electrical power using an alternator, which employs electromagnetic induction to convert mechanical energy to electrical energy. The alternator acts as a dc generator (Example 29. 4 ). The alternator maintains and replenishes charge on the car's battery and operates headlights, radiator fans, windshield wipers, power windows, computer systems, sensors, sound systems, and other components. (a) A typical car battery provides 70 amp-hours of charge. How many coulombs is that
In order to determine how many coulombs are in a typical car battery's 70 amp-hours of charge, we first need to understand the relationship between amps and coulombs.
Amps measure the flow of electric current, while coulombs measure the amount of electric charge. One coulomb is equal to the amount of charge transported by a current of one ampere in one second.
Therefore, to convert amp-hours to coulombs, we need to multiply the number of amp-hours by the number of seconds in an hour (3,600) and by the number of coulombs per ampere-second (1). This gives us:
70 amp-hours x 3,600 seconds/hour x 1 coulomb/ampere-second = 252,000 coulombs
So a typical car battery provides 252,000 coulombs of charge. This is important information because it helps us understand the amount of electrical energy available for use in the various components of the vehicle, such as the headlights, windshield wipers, and sound system.
The alternator plays a critical role in maintaining and replenishing the charge on the car's battery, which in turn ensures that these components can continue to operate effectively.
Overall, the interplay between mechanical and electrical systems in a motor vehicle is a fascinating and complex topic that requires a deep understanding of physics, engineering, and technology.
To know more about coulombs refer here
https://brainly.com/question/12498766#
#SPJ11
An Oceanic Plate is subducting on it's eastern side, what is the most likely boundary type on the western side of the plate?
A concrete column has a diameter of 350m and length of 2m. If the density (mass/volume) of the concrete is 2. 45mg/m^3 determine the weight of column in pounds
The weight of the concrete column with a diameter of 350mm and a length of 2m, having a density of 2.45 Mg/m³, is: approximately 1042 pounds.
To determine the weight of the concrete column with a diameter of 350mm and a length of 2m, we first need to calculate its volume. Since the column is cylindrical, we can use the formula for the volume of a cylinder: V = πr²h, where V is the volume, r is the radius, and h is the height.
The radius of the column is half of the diameter, so r = 350mm / 2 = 175mm, which is equivalent to 0.175m. The height is 2m. Plugging these values into the formula, we get:
V = π(0.175m)²(2m) ≈ 0.193m³
Now that we have the volume, we can use the given density of concrete, which is 2.45 Mg/m³, to determine the mass. The mass can be calculated using the formula: mass = density × volume.
Mass = 2.45 Mg/m³ × 0.193m³ ≈ 0.473 Mg
Next, we need to convert the mass from Mg (megagrams) to kg (kilograms) since 1 Mg = 1000 kg:
Mass = 0.473 Mg × 1000 kg/Mg = 473 kg
Now, to find the weight, we'll use the formula: weight = mass × gravity. The gravitational force is approximately 9.81 m/s².
Weight = 473 kg × 9.81 m/s² ≈ 4638.93 N (Newtons)
Finally, we'll convert the weight from Newtons to pounds using the given conversion factor: 1 pound = 4.4482 N.
Weight = 4638.93 N × (1 pound / 4.4482 N) ≈ 1042 pounds
To know more about density, refer here:
https://brainly.com/question/28929608
#SPJ11
Complete question:
A concrete column has a diameter of 350mm and a length of 2m. If the density (mass/volume) of concrete is 2.45 Mg/m3 determine the weight of the column in pounds. 1 pound = 4.4482 N
Click to review the online content. Then answer the question(s) below, using complete sentences. Scroll down to view additional questions.
Online Content: Site 1
Describe the new framework for Alzheimer’s..
The new research framework of Alzheimer is one that is based on biomarkers that are set into different pathologic processes of Alzheimer's which is then measured in living people with the use of imaging technology as well as analysis of cerebral spinal fluid samples.
What is Alzheimer?Research suggests that inflammation in the brain may lead to AD by forming amyloid plaques and neurofibrillary tangles. Researchers explore anti-inflammatory drugs & personalized treatment for AD.
Therefore, Using genetics and biomarkers to identify high-risk AD patients, and customizing treatment plans with drugs or therapies that target underlying factors.
Learn more about Alzheimer from
https://brainly.com/question/27414232
#SPJ1
Jose does push-ups by applying a force to elevate his body 10 cm off the ground. he does 50 j of work. if jose does each push-up in two seconds, what is the power delivered?
physical science.
help please
Answer:
The power delivered by Jose when doing push-ups is 25 watts.
Step-by-step explanation:
The power delivered by Jose is:
[tex]\sf\qquad\dashrightarrow Power = \dfrac{Work}{Time}[/tex]
We know that Jose did 50 J of work in 2 seconds, so we can substitute these values into the equation:
[tex]\sf:\implies Power = \dfrac{50\: J}{2\: s}[/tex]
[tex]\sf:\implies \boxed{\bold{\:\:Power = 25\: W\:\:}}\:\:\:\green{\checkmark}[/tex]
Therefore, the power delivered by Jose when doing push-ups is 25 watts.
A performing dolphin speeds through the water and hits a rubber ball originally at rest. describe what happens to the velocities of the dolphin and the ball.
According to the law of conservation of momentum, the total momentum of the system of the dolphin and the ball is conserved. Initially, the dolphin and the ball have a total momentum of zero as the ball is at rest.
When the dolphin hits the ball, it exerts a force on it, causing it to move in the direction of the force.
This creates a net momentum in the direction of the ball's motion, which is equal in magnitude and opposite in direction to the momentum of the dolphin.
Therefore, the dolphin's momentum decreases while the ball's momentum increases.
The dolphin continues moving forward but with a reduced velocity, while the ball moves away from the dolphin with a velocity that depends on the mass of the ball and the force applied by the dolphin.
To know more about law of conservation, refer here:
https://brainly.com/question/28996277#
#SPJ11
he difference between mass and weight. *
Diode-fare semiconductor devices.
Diodes only allow a current to pass in one direction in a circuit (forward direction).
The potential difference (p. D. ) at which the diode will allow a current to pass in the
circuit is called the threshold p. D.
Write a plan to find the threshold p. D. And its direction to enable a current to pass.
Your plan should include the following details:
a hypothesis
selection and justification of equipment, techniques or standard procedures
health and safety associated with the investigation
methods for data collection and analysis to test the hypothesis including:
the quantities to be measured
the number and range of measurements to be taken
how equipment may be used
control variables
brief method for data collection analysis.
Determine threshold potential difference of diode by increasing voltage until current flows. Use a diode, multimeter, DC power supply, and take multiple readings of voltage and current. Plot graph of current against voltage to find threshold. Follow safety measures.
Hypothesis: The threshold potential difference of a diode can be determined by using a multimeter in series with the diode and gradually increasing the voltage until a current flows through the diode in the forward direction.
Equipment: A diode, a multimeter, a variable DC power supply, connecting wires, a breadboard, and a resistor.
Technique: The diode should be connected in series with the multimeter and the variable power supply on the breadboard. The power supply voltage should be gradually increased, and the multimeter should be used to measure the current flowing through the diode in the forward direction. The voltage at which the current starts to flow is the threshold potential difference.
Health and Safety: Ensure that all electrical connections are secure and insulated, avoid touching exposed wires, and use appropriate personal protective equipment.
Data Collection: Measure the voltage and current using the multimeter, and take multiple readings at different voltage values. The range of measurements should be selected based on the expected threshold potential difference of the diode.
Analysis: Plot a graph of the current against the voltage to observe the relationship between the two variables. The threshold potential difference can be identified as the voltage at which the current starts to increase significantly.
Control variables should be kept constant throughout the experiment, including the resistor and the distance between the components on the breadboard.
In summary, the threshold potential difference of a diode can be determined by gradually increasing the voltage until a current flows through the diode in the forward direction.
The equipment required includes a diode, multimeter, variable DC power supply, and connecting wires. The data should be collected by measuring the voltage and current using the multimeter, and multiple readings should be taken at different voltage values.
The threshold potential difference can be identified by plotting a graph of the current against voltage, and appropriate health and safety measures should be followed.
To know more about voltage refer here:
https://brainly.com/question/31347497#
#SPJ11
the earth travels around the sun in an almost circular orbit at an almost constant speed of 107,300 km/h (or 67,062 mi/h)! which statement(s) are true about the earth's motion about the sun?multiple select question.the earth is going too fast to accelerate any more.the earth is not accelerating since we earthlings do not feel the acceleration.the earth is not accelerating since its speed is constant.the earth has a velocity that is always changing.the earth cannot accelerate since it is in space.the earth is accelerating since the direction of its velocity is changing.
The statement that the earth is accelerating since the direction of its velocity is changing is true, as changes in direction are also changes in velocity, which constitutes acceleration
The statement that the earth is going too fast to accelerate any more is false. This is because acceleration is a change in velocity, which can occur even if the speed is constant.
The statement that the earth is not accelerating since we earthlings do not feel the acceleration is also false, as acceleration is a physical property of an object's motion, independent of perception.
The statement that the earth is not accelerating since its speed is constant is true, as acceleration is defined as a change in velocity, which includes changes in speed or direction.
The statement that the earth has a velocity that is always changing is also true, as its motion around the sun is not perfectly circular and is affected by other celestial bodies.
The statement that the earth cannot accelerate since it is in space is false, as acceleration is a property of motion regardless of the medium in which it occurs.
To lean more about : velocity
https://brainly.com/question/80295
#SPJ11
If two charges, with 2 c and 4 c, were separated in air by a distance of 1500 m, what would be the force between them?
The force between the charges of 2 C and 4 C, separated by a distance of 1500 m in air, is approximately 3.84 × [tex]10^6[/tex] Newtons.
The force between two charges can be calculated using Coulomb's law, which states that the force (F) between two charges (q₁ and q₂) is given by the equation:
F = (k * |q₁ * q₂|) / r²
where k is the electrostatic constant (approximately 9 × [tex]10^9[/tex] N·m²/C²), q₁ and q₂ are the magnitudes of the charges, and r is the distance between the charges.
In this case, the charges are 2 C and 4 C, and the distance between them is 1500 m. Let's calculate the force:
F = (k * |q₁ * q₂|) / r²
= (9 × [tex]10^9[/tex] N·m²/C² * |2 C * 4 C|) / (1500 m)²
Simplifying the expression:
F = (9 × [tex]10^9[/tex] N·m²/C² * 8 C²) / (1500 m)²
= (9 × 8 × [tex]10^9[/tex] N·m²) / (1500 m)²
Calculating the value:
F = (72 ×[tex]10^9[/tex] N·m²) / (1500 m)²
= (72 × [tex]10^9[/tex]) / (1500²) N
F ≈ 3.84 × [tex]10^6[/tex] N
Therefore, the force between the charges of 2 C and 4 C, separated by a distance of 1500 m in air, is approximately 3.84 × [tex]10^6[/tex] Newtons.
To know more about Coulomb's law refer here
https://brainly.com/question/506926#
#SPJ11
The basketball started at a height of about 4 feet above the ground. While dribbling the ball traveled downward until it hit the ground, then it returned to its initial height. What is the distance and what is the displacement?
Answer:Assuming that the basketball is dropped from rest and bounces back up to its initial height of 4 feet, we can use the equations of motion to find the distance and displacement.
The distance traveled by the basketball is the total length of the path it travels, which can be calculated by adding up the distance traveled during each phase of the motion. During the first phase, the ball falls from a height of 4 feet to the ground, a distance of 4 feet. During the second phase, the ball bounces back up from the ground to a height of 4 feet, covering the same distance of 4 feet. Therefore, the total distance traveled by the basketball is:
Distance = 4 + 4 = 8 feet
The displacement of the basketball, on the other hand, is the straight-line distance between its initial and final positions. Since the basketball returns to its initial height of 4 feet, its displacement is equal to zero. Therefore:
Displacement = 0 feet
Explanation:
Please need help!!!
Gender shifts are actually a common phenomenon in public roles (employment,
entertainment, or otherwise). Identify a role and explain if there is a status change
in the role - as in how these women or non binary folks are treated by the others
in the situation (still treated as women/non-binary or as if they are men-explain).
Gave me two examples please need due today!!!
One example of gender shift in public roles is in the field of politics. In many countries, women and non-binary individuals are still a minority in political positions, and their presence can challenge traditional gender roles and expectations. When women or non-binary individuals hold political positions, they may face discrimination or prejudice from other politicians or the public, based on their gender identity. However, as more women and non-binary individuals enter politics, they are slowly shifting the gender dynamics and expectations of what it means to be a politician.
Another example of gender shift in public roles is in the entertainment industry. Historically, the industry has been dominated by men and traditional gender roles have been reinforced in many forms of media. However, in recent years, more women and non-binary individuals have gained visibility and recognition in the industry, challenging traditional gender roles and norms. While there is still a long way to go in terms of achieving equal representation and opportunities, these shifts have brought attention to the need for diversity and inclusion in the entertainment industry.
After 3 s, brian was running at 1.2 m/s on a straight path. after 7 s, he was running at 2 m/s. what was his acceleration
Brian's acceleration was [tex]0.2 m/s^{2}[/tex]. This means that his velocity increased by 0.2 m/s every second during the 4 seconds.
To find Brian's acceleration, we can use the formula: acceleration = (change in velocity) / (time taken)
The change in velocity is the difference between his final velocity and initial velocity: change in velocity = final velocity - initial velocity
So, we have: change in velocity = 2 m/s - 1.2 m/s = 0.8 m/s
The time taken is: time taken = 7 s - 3 s = 4 s
Now we can plug in these values to find the acceleration: acceleration = (0.8 m/s) / (4 s) = [tex]0.2 m/s^{2}[/tex]
Therefore, Brian's acceleration was [tex]0.2 m/s^{2}[/tex]. This means that his velocity increased by 0.2 m/s every second during the 4 seconds.
To know more about acceleration, refer here:
https://brainly.com/question/2303856#
#SPJ11
5. A bathroom heater uses 10. 5 A of current when connected to a 120. V potential difference. How much power does this heater dissipate?
· Remember to identify all data (givens and unknowns), list equations used, show all your work, and include units and the proper number of significant digits to receive full credit
The power dissipated by the bathroom heater is 1.26 kW or 1260 W.
Given data:
1. Current (I) = 10.5 A
2. Potential difference (V) = 120 V
Unknown:
1. Power (P)
Equation used: P = IV
Now, let's solve the problem step-by-step:
Step 1: Recall the formula for power, which is P = IV.
Step 2: Plug in the given values for current (I) and potential difference (V) into the equation.
P = (10.5 A) × (120 V)
Step 3: Perform the multiplication to calculate the power.
P = 1260 W
Step 4: Check the significant digits. Both given values have three significant digits, so our answer should also have three significant digits.
For more about power dissipated:
https://brainly.com/question/12803712
#SPJ11
(PLEASE HELP ME OUT). A student claims when they use their space heater and hairdryer at the same time, the power for the entire house goes out. A second student says that it is not possible for the use of those two items to affect the power to the entire house. Using your knowledge of circuitry and electricity, explain why it is unlikely that the power for the entire house would go out.
In response to the question about a student claiming that using a space heater and hairdryer at the same time causes the power for the entire house to go out, it is unlikely that the power for the entire house would be affected. This can be explained using knowledge of circuitry and electricity.
Firstly, the electrical system in a house is designed with multiple circuits. Each circuit is protected by a circuit breaker, which is a safety device designed to prevent electrical overloads and short circuits. When a circuit is overloaded or a short circuit occurs, the circuit breaker trips, cutting off power to that specific circuit only, not the entire house.
In this scenario, the space heater and hairdryer are likely drawing a large amount of current due to their high power consumption. If both appliances are connected to the same circuit, it is possible that the combined current drawn by the heater and hairdryer exceeds the capacity of the circuit breaker, causing it to trip and cut off power to that specific circuit.
However, the power for the entire house should not go out, as the other circuits in the house would remain unaffected. The second student's claim that the use of the space heater and hairdryer cannot affect the power to the entire house is more accurate, given that only the circuit containing these appliances would be impacted.
In conclusion, it is unlikely that using a space heater and hairdryer simultaneously would cause the power for the entire house to go out, as circuit breakers are designed to protect specific circuits from overload and not the whole electrical system.
To know more about claiming refer here
https://brainly.com/question/14551819#
#SPJ11
The vast majority of stars in a newly formed star cluster are __________. red giants very high-mass, type o and b stars less massive than the sun about the same mass as our sun
The vast majority of stars in a newly formed star cluster are less massive than the sun, and about the same mass as our sun.
In a newly formed star cluster, most stars are categorized as low-mass or medium-mass stars, similar in size to our sun. This is because the process of star formation results in a mass distribution that follows a pattern called the initial mass function (IMF).
The IMF indicates that lower mass stars are much more abundant than high-mass stars.
High-mass, Type O and B stars, as well as red giants, are not as common in newly formed star clusters. Type O and B stars are very massive, hot, and luminous, but their rarity is due to the fact that they consume their nuclear fuel at a rapid rate, leading to shorter lifespans.
Red giants are also relatively rare in new star clusters, as they represent a later evolutionary stage of lower-mass stars, such as those with masses similar to our sun.
In summary, the vast majority of stars in a newly formed star cluster are less massive than the sun and about the same mass as our sun. High-mass, Type O and B stars, and red giants are less common in these clusters.
To know more about initial mass function (IMF) refer here
https://brainly.com/question/31533880#
#SPJ11
Design an experimental set up to show that white light is made up of different colours of light
Using a prism to split white light into its component colors is a classic experimental setup that demonstrates that white light is made up of a range of colors.
One classic experimental setup to demonstrate that white light is made up of different colors of light is the use of a prism. Here are the steps to set up the experiment:
Start with a source of white light, such as a flashlight or a lamp.
Shine the white light onto a prism, which is a triangular-shaped piece of glass or plastic.
The prism will refract or bend the light, splitting it into its different colors, which are the colors of the rainbow (red, orange, yellow, green, blue, indigo, and violet).
Observe the spectrum of colors that are produced on the other side of the prism.
To make the colors more visible, place a white screen or piece of paper behind the prism.
You can also use a spectroscope, which is a tool that separates light into its component wavelengths, to measure the wavelengths of each color in the spectrum.
This experiment shows that white light is not a single color, but is made up of a range of colors.
To learn more about Prism
https://brainly.com/question/29722724
#SPJ4
Make a problem where an object goes through three different energy changes. The last change needs to be a situation where all the energy turns into Spring Potential energy. Write the problem, then separately solve it
The total work done on the block is the sum of the work done in each part 7.56 J. The maximum potential energy stored in the spring is 0.5 J.
A 0.5 kg block is initially at rest on a frictionless surface. It is pushed by a constant horizontal force of 5 N for a distance of 2 meters. As it travels, it encounters a rough surface with a coefficient of kinetic friction of 0.2 and slides a distance of 3 meters before coming to a stop. Finally, the block is pushed against a spring with a spring constant of 100 N/m and compressed it by 0.1 meters. Find the total work done on the block and the maximum potential energy stored in the spring.
The problem can be divided into three parts, each representing a different energy change.
Part 1: Kinetic Energy
The work done on the block by the horizontal force can be calculated using the equation:
Work = Force x Distance x Cos(theta)
where theta is the angle between the force and the displacement. In this case, theta is 0 since the force is in the same direction as the displacement.
Work = 5 N x 2 m x Cos(0) = 10 J
The work done on the block increases its kinetic energy by 10 J. Since the block was initially at rest, its initial kinetic energy was zero.
Part 2: Frictional Heat
As the block slides on the rough surface, the force of kinetic friction acts in the opposite direction to its motion. The work done by the force of friction is:
Work = Force of friction x Distance x Cos(theta)
where theta is the angle between the force of friction and the displacement. In this case, theta is 180 since the force of friction is opposite to the displacement.
Work = (0.2 x 9.8 x 0.5 kg) x 3 m x Cos(180) = -2.94 J
The negative sign indicates that the work done by the force of friction is negative, which means it takes away energy from the block. The work done by the force of friction converts the kinetic energy of the block into heat.
Part 3: Spring Potential Energy
The block is then pushed against a spring, which compresses it by 0.1 meters. The work done by the spring force is given by the equation:
Work = [tex]$\frac{1}{2}kx^2$[/tex]
where k is the spring constant and x is the displacement of the block from its equilibrium position.
Work = [tex]$\frac{1}{2}(100 \text{ N/m})(0.1 \text{ m})^2 = 0.5 \text{ J}$[/tex]
The work done by the spring force converts the remaining kinetic energy of the block into potential energy stored in the spring.
Total Work:
The total work done on the block is the sum of the work done in each part:
Total Work = Kinetic Energy + Frictional Heat + Spring Potential Energy
Total Work = 10 J - 2.94 J + 0.5 J
Total Work = 7.56 J
Maximum Potential Energy:
The maximum potential energy stored in the spring occurs when the block is fully compressed and is given by the equation:
Potential Energy = [tex]$\frac{1}{2}kx^2$[/tex]
Potential Energy = [tex]$\frac{1}{2}(100 \text{ N/m})(0.1 \text{ m})^2 = 0.5 \text{ J}$[/tex]
To learn more about potential energy
https://brainly.com/question/24284560
#SPJ4
Complete question:
A 0.5 kg block is initially at rest on a frictionless surface. It is pushed by a constant horizontal force of 5 N for a distance of 2 meters. As it travels, it encounters a rough surface with a coefficient of kinetic friction of 0.2 and slides a distance of 3 meters before coming to a stop. Finally, the block is pushed against a spring with a spring constant of 100 N/m and compressed it by 0.1 meters. Find the total work done on the block and the maximum potential energy stored in the spring.
A 52. 0 kg diver jumps off a diving board with an upward velocity of 1. 7 m/s. The diving board bounces off a spring with a spring constant of 4100 N/m. Ignore her horizontal velocity. How far did the diver compress the spring in order to achieve her initial upward velocity?
The diver compresses the spring by 0.35 m to achieve her initial upward velocity. At the point where the diver contacts the spring, all the energy is in the form of kinetic energy.
At the maximum compression point, all the energy is in the form of elastic potential energy stored in the spring. Therefore, we can use the conservation of energy principle to determine how much the spring is compressed.
The initial kinetic energy of the system is given by 1/2[tex]mv^{2}[/tex], where m is the mass of the diver and v is the initial upward velocity.
Initial kinetic energy = 1/2*(52.0 kg)*[tex](1.7 m/s)^{2}[/tex] = 79.1 J
At maximum compression, the elastic potential energy stored in the spring is equal to the initial kinetic energy.
Elastic potential energy = 1/2[tex]kx^{2}[/tex], where k is the spring constant and x is the distance that the spring is compressed.
Solving for x: x = sqrt(2initial kinetic energy/k) = sqrt(279.1 J/4100 N/m) = 0.35 m
Therefore, the diver compresses the spring by 0.35 m to achieve her initial upward velocity.
To know more about kinetic energy, refer here:
https://brainly.com/question/999862#
#SPJ11
