How many moles are in 98. 3 grams of nickel(III) phosphate

The volume of gas in the neon sign is 2.0 mL.

Neon signs are a popular form of advertising, characterized by bright and colorful lights that make them easily noticeable. These signs are made up of glass tubes that contain a small amount of neon gas at extremely low pressures, typically around 27.0 torr.

When an electrical current is applied to the gas, it emits a bright red-orange light, giving the sign its characteristic glow.

In order to determine the volume of gas in a neon sign, we need to use the ideal gas law equation, PV=nRT. We are given the pressure, temperature, and number of moles of gas in the sign, but we need to find the volume. Rearranging the equation to solve for V, we get V=nRT/P.

Plugging in the given values, we get:

V = (1.075 x 10^-4 moles)(0.0821 L•atm/mol•K)(315.75 K)/(27.0 torr x 1 atm/760 torr)
V = 0.002 L or 2.0 mL

Therefore, the volume of gas in the neon sign is 2.0 mL. It's important to note that the volume of gas in the sign can vary depending on the size and shape of the sign, as well as the pressure and temperature of the gas inside.

To know more about neon sign, visit:

https://brainly.com/question/30179681#

#SPJ11

There are 7 periods in the periodic table of elements.

The periodic table is a tabular arrangement of the chemical elements, organized according to their atomic number, electron configuration, and recurring chemical properties. Elements are presented in increasing atomic number, displayed in rows called periods.

Each period corresponds to the filling of a new electron shell, with the number of the period indicating the principal quantum number (n) of the electron shell being filled.

Period 1 contains only two elements, hydrogen and helium, as it corresponds to the filling of the 1s subshell. Period 2 and 3 each contain eight elements, corresponding to the filling of 2s, 2p, 3s, and 3p subshells. Period 4 and 5 contain 18 elements each, filling the 4s, 3d, 4p, 5s, 4d, and 5p subshells.

Finally, periods 6 and 7 contain 32 elements each, filling the 6s, 4f, 5d, 6p, 7s, 5f, 6d, and 7p subshells.

In summary, the periodic table consists of 7 periods, with each period representing the filling of a new electron shell. The number of elements in each period increases as you move down the periodic table due to the additional subshells that are filled.

To know more about periodic table, visit:

https://brainly.com/question/31672126#

#SPJ11

A filter funnel is used in laboratory experiments to separate a solid from a liquid mixture.

The funnel is designed with a conical shape and a narrow stem that fits into a filter paper, allowing the liquid to pass through while retaining the solid on top of the filter paper.

When using a filter funnel, it is important to wet the filter paper with the solvent before adding the mixture to prevent the filter paper from tearing or disintegrating.

The mixture is then poured into the funnel, and the liquid is allowed to filter through the paper into a receiving flask or beaker.

The filter funnel can be used for various applications, such as separating precipitates from a solution, isolating a solid product from a reaction mixture, or purifying a liquid by removing impurities.

The type of filter paper used will depend on the size of the particles being filtered and the solvent used.

It is important to handle the filter funnel with care to avoid spillage or breakage and to dispose of the solid waste properly after filtering.

to know more about filter funnel refer here:

https://brainly.com/question/9857749#

#SPJ11

Answer:

separate cabbage from liquid

Explanation:

You will use a filter funnel in this experiment to

✔ separate cabbage from liquid

To make a 750 M solution with a volume of 855 ml, we need 56.79 grams of CaCl₂. The calculation involves using the formula mass = Molarity x Volume x Molar mass.

To calculate the mass of CaCl₂ required to make a 750 M solution with a volume of 855 ml, we can use the following formula:

mass = Molarity x Volume x Molar mass

where:

Molarity is the concentration of the solution in moles per liter (M)

Volume is the volume of the solution in liters (L)

Molar mass is the mass of one mole of the solute in grams (g/mol)

The molar mass of CaCl₂ is:

Ca = 40.08 g/mol

Cl₂ = 2 x 35.45 g/mol = 70.90 g/mol

Molar mass of CaCl₂ = 40.08 + 70.90 = 110.98 g/mol

Substituting the given values into the formula, we get:

mass = 750 mol/L x 855 mL x (1 L / 1000 mL) x 110.98 g/mol

Note that we need to convert the volume from milliliters to liters by dividing by 1000.

mass = 56.79 g

Therefore, we need 56.79 grams of CaCl₂ to make a 750 M solution with a volume of 855 ml.

To know more about the Molar mass refer here :

https://brainly.com/question/22997914#

#SPJ11

When ethanedioic acid (HOOC-COOH) reacts with two 1,2-ethanediol molecules (HOCH₂CH₂OH), it forms a trimmer polymer.

Polymer is a material composed of long chain molecules, or macromolecules, which are made up of many repeating smaller units, known as monomers. Polymer molecules can be natural, such as cellulose, or synthetic, such as plastics and rubbers. Polymers are used to produce a wide range of materials with different characteristics and properties.

The HOOC group of the ethanedioic acid molecule reacts with the two hydroxyl groups of the two 1,2-ethanediol molecules to form the ester linkages. This produces a trimmer polymer, with three monomers connected via two ester linkages.

O

 |

HOOC-COO-O-CH₂CH₂-O-CH₂CH₂-OH

 |

 O

 H

To learn more about polymer

https://brainly.com/question/2494725

#SPJ4

75.83 grams of KNO3 are required to prepare a 0.50 M solution in 1.50 L of water.

To prepare a 0.50 M solution of KNO3 in 1.50 L of water, we can determine the amount of KNO3 required by using the formula:

Molarity (M) = moles of solute / liters of solution

Rearranging the formula, we can calculate the number of moles of KNO3:

moles of KNO3 = Molarity x liters of solution

Given the values, we find:

moles of KNO3 = 0.50 M x 1.50 L = 0.75 moles

To find the mass of KNO3 needed, we need to use its molar mass:

molar mass of KNO3 = 101.10 g/mol

Therefore, the mass of KNO3 required is:

mass of KNO3 = moles of KNO3 x molar mass of KNO3

Substituting the values, we obtain:

mass of KNO3 = 0.75 moles x 101.10 g/mol = 75.83 g

Hence, to prepare a 0.50 M solution in 1.50 L of water, you would need 75.83 grams of KNO3.

Know more about Molarity here:

https://brainly.com/question/22997914

#SPJ11

A concentration of 0.30 M [[tex]H^{+}[/tex]] in the water would indicate a strong acid for the given solution of [tex]H_{2} X[/tex].

A strong acid is one that completely dissociates in water, meaning it donates all of its hydrogen ions ([tex]H^{+}[/tex]) to the solution.

For the given acid, [tex]H_{2} X[/tex], the dissociation equation would be:
[tex]H_{2} X[/tex] → 2[tex]H^{+}[/tex] + [tex]X^{2-}[/tex]

Since it's a strong acid, we assume that all molecules will dissociate, resulting in two moles of [tex]H^{+}[/tex] for every mole of [tex]H_{2} X[/tex]. Therefore, to calculate the concentration of [[tex]H^{+}[/tex]] in the solution:

[[tex]H^{+}[/tex]] = 2 × (concentration of [tex]H_{2} X[/tex])

Given the concentration of [tex]H_{2} X[/tex] is 0.15 M:

[[tex]H^{+}[/tex]] = 2 × 0.15 M

[[tex]H^{+}[/tex]] = 0.30 M

So, a concentration of 0.30 M [[tex]H^{+}[/tex]] in the water would indicate a strong acid for the given solution of [tex]H_{2} X[/tex].

To know more about strong acids visit:

https://brainly.com/question/8743052

#SPJ11

Answer:

107g

Explanation:

First convert the number of molecules to moles using avogadro's number.

There are 6.02 x 10^23 molecules in 1 mol.

3.8 x 10^24 molecules NH3 ÷ 6.02 x 10^23 molecules / mol

= 6.31 mol NH3

Now that we have moles of NH3 we can multiply it by NH3's molecular mass.

NH3 molecular mass = Mass of N + Mass of H x 3

14.007g/mol + 1.008g/mol * 3

= 17.031 g NH3/ mol

6.31 mol NH3 * 17.031 g NH3 / mol

= 107g NH3

The difference in pressure between ideal and non-ideal conditions for CO₂ is 0.01 atm.

To find the difference in pressure between ideal and non-ideal conditions for CO₂ using the van der Waals equation, follow these steps:

1. First, recall the van der Waals equation: (P + a(n/V)²)(V - nb) = nRT, where P is pressure, n is the number of moles, V is volume, T is temperature, a and b are van der Waals constants, and R is the ideal gas constant (0.0821 L･atm/mol･K).

2. Given values: n = 2.0 mol, V = 7.30 L, T = 200.0 K, a = 3.59 L²･atm/mol², b = 0.0427 L/mol, and P_vdW = 4.50 atm (non-ideal pressure).

3. Calculate the ideal pressure (P_ideal) using the ideal gas law, PV = nRT:
  P_ideal = nRT/V = (2.0 mol)(0.0821 L･atm/mol･K)(200.0 K) / 7.30 L = 4.49 atm.

4. Find the difference in pressure between ideal and non-ideal conditions:
  ΔP = P_vdW - P_ideal = 4.50 atm - 4.49 atm = 0.01 atm.

The difference in pressure between ideal and non-ideal conditions for CO₂ is 0.01 atm.

To know more about van der Waals equation :

https://brainly.com/question/31585867

#SPJ11

The partial pressure of gas X if 0. 500 moles of each is used is 1 atm.

In a gas mixture, the pressure exerted by individual gases on the walls of the container is known as partial pressure of the gas. The sum of the partial pressures of all the gas molecules fives the total pressure of the gas.

Partial pressure = number of moles/ total moles × total pressure

since, 0.5 moles of each gas is used,

partial pressure of X is

= moles of X /total moles of X,E,Z  × total pressure

= 0.5 moles  × 3 atm/ 1.5 moles

= 1 atm

To know more about partial pressure here

https://brainly.com/question/31214700

#SPJ4

The limiting reagent is F₂, the number of OF₂ molecules formed is 2 and the number of F₂ atoms/molecules in excess is 2.

Since there are two oxygen molecules and four fluorine molecules, fluorine is in excess.

The balanced equation is O₂ + 2 F₂ → OF₂, which shows that 1 molecule of O₂ reacts with 2 molecules of F₂ to form 2 molecules of OF₂. Therefore, since there are only 2 molecules of F₂ available, the limiting reagent is F₂.

As F₂ is the limiting reagent, only 1 molecule of O₂ will react with 2 molecules of F₂ to form 2 molecules of OF₂. Therefore, the number of OF₂ molecules formed is 2.

The number of atoms/molecules in excess is the difference between the number of atoms/molecules available and the number of atoms/molecules used in the reaction. In this case, since F₂ is in excess, the number of F₂ molecules in excess is 2.

Find out more on limiting reagents here: https://brainly.com/question/14222359

#SPJ1

Image transcribed:

Use the References to access important values if needed for this question.

The illustration to the left represents a mixture of oxygen (red) and fluorine (green) molecules.

If the molecules in the above illustration react to form OF₂ according to the equation

O₂ + 2 F₂ →  OF₂,

the limiting reagent is _______, the number of OF₂ molecules formed is ______ and

the number of ______ atoms/molecules in excess is ________.

The reaction is combustion reaction of hydrocarbon.

Combustion reaction of hydrocarbons is a chemical reaction in which a hydrocarbons reacts with oxygen in the air to produce carbon dioxide (CO₂) and water (H₂O).

The general equation for the combustion of a hydrocarbon is:

hydrocarbon + oxygen → carbon dioxide + water + heat energy

The given reaction;

2C₈H₁₈ + 25O₂ -------> 16CO₂ + 18H₂O

So this reaction corresponds to combustion reaction.

Learn more about combustions here: https://brainly.com/question/13251946

#SPJ1

2.5 moles of gas at 322 K and 0.90 atm of pressure would occupy 72.8 liters of volume.

We can use the ideal gas law to solve this problem:

PV = nRT

where P is the pressure in atm, V is the volume in liters, n is the number of moles, R is the ideal gas constant (0.0821 L·atm/mol·K), and T is the temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin:

322 K = 49°C + 273.15

Now we can plug in the values and solve for V:

V = nRT/P

V = (2.5 mol)(0.0821 L·atm/mol·K)(322 K)/(0.90 atm)

V = 72.8 L

Therefore, 2.5 moles of gas at 322 K and 0.90 atm of pressure would occupy 72.8 liters of volume.

To know more about ideal gas law refer to-

https://brainly.com/question/28257995

#SPJ11

At STP (Standard Temperature and Pressure), one mole of any ideal gas occupies 22.4 liters of volume. The molar mass of SO2 (sulphur dioxide) is 64.06 g/mol.

To calculate the mass of SO2 in 0.410 L of SO2 gas at STP, we can first calculate the number of moles of SO2 using the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant (0.08206 L·atm/mol·K) and T is the temperature. At STP, the temperature is 273 K.

So, n = (PV)/(RT) = [(1 atm) x (0.410 L)]/[(0.08206 L·atm/mol·K) x (273 K)] = 0.0162 mol

Therefore, there are 0.0162 moles of SO2 in 0.410 L of SO2 gas at STP.

Finally, we can calculate the mass of SO2 using the molar mass of SO2:

mass = number of moles x molar mass

mass = 0.0162 mol x 64.06 g/mol = 1.04 g

Therefore, there are 1.04 grams of SO2 in 0.410 L of SO2 gas at STP.

To learn more about ideal gas law, click here: brainly.com/question/13821925

#SPJ11

The Bohr equation for the hydrogen atom is given by:

E = -2.18 × 10^-18 J/n^2

where E is the energy of the electron, and n is the principal quantum number.

The lowest energy level or ground state of hydrogen is when n = 1. So, we can find the energy of the lowest excited state by setting n = 2 in the Bohr equation:

E = -2.18 × 10^-18 J/2^2 = -0.54 × 10^-18 J

The energy of the lowest excited state is the difference between the energy of the ground state and the energy of the excited state. So, we can find the energy of the lowest excited state by subtracting the energy of the ground state (n=1) from the energy of the excited state (n=2):

ΔE = E₂ - E₁ = (-0.54 × 10^-18 J) - (-2.18 × 10^-18 J) = 1.64 × 10^-18 J

Therefore, the energy of the lowest excited state of hydrogen is 1.64 × 10^-18 J, which is closest to option (b) 1.66 × 10^-18 J.

To know more about  hydrogen  refer here

https://brainly.com/question/31018544#

#SPJ11

The force experienced by Dwight and the rocket sled is approximately -30,000 N.

The force can be calculated using the formula :

F = ma

where F is the force,

m is the mass

and a is the acceleration.

Acceleration can be calculated using the formula :

a = v/t

a = (final speed - initial speed) / time
a = (0 m/s - 100 m/s) / 1.5 s
a = (-100 m/s) / 1.5 s
a = -66.67 m/s² (negative sign indicates deceleration)

Calculate the force:
F = ma
F = (450 kg) × (-66.67 m/s²)
F = -30,000 N (approximately)

Thus, the force experienced is -30,000 N. The negative sign indicates the force acts in the opposite direction of the initial motion, as it brings the sled and Dwight to a stop.

To learn more about force visit:

https://brainly.com/question/12785175

#SPJ11

Strontium nitrate is most likely the unknown solution based on the fact that it produces a white precipitate when combined with potassium carbonate but not when combined with potassium sulphate.

A "chemical reaction occurring in an aqueous solution when two ionic bonds combine, yielding the creation of an insoluble salt" is what is meant by the term "precipitation reaction." Precipitates are the insoluble salts created during precipitation reactions.

Antibodies and antigens interact to cause precipitation reactions. They are founded on the idea that two soluble reactants can combine to create one precipitate, which is an insoluble product. Lattice formation is necessary for these processes.

To know more about solution visit:-

https://brainly.com/question/30665317

#SPJ1

The pH of a solution of a weak acid H₂CO₃ (carbonic acid) which is 1. 2 x 10⁻⁵ M is 5.64.

The pH of this weak acid when 1. 0 x 10⁻⁴ M NaHCO₃ is added to it is 9.53.

To find the pH of a solution of weak acid H₂CO₃ with a concentration of 1.2 x 10⁻⁵ M, we can use the equation for the acid dissociation constant (Ka) of H₂CO₃:

Ka = [H+][HCO₃⁻]/[H₂CO₃]

We know that the Ka value for H₂CO₃ is 4.3 x 10⁻⁷, and we can assume that the concentration of HCO₃⁻ is equal to the concentration of H⁺ since it is a weak acid. Therefore, we can simplify the equation to:

4.3 x 10⁻⁷ = [H⁺]² / 1.2 x 10⁻⁵

Solving for [H⁺], we get:

[H⁺] = 3.3 x 10⁻⁴ M

To find the pH, we can use the equation:

pH = -log[H⁺]

So, the pH of the solution before adding NaHCO₃ is:

pH (before) = -log(3.3 x 10⁻⁴) = 5.64

When 1.0 x 10⁻⁴ M of NaHCO₃ is added to the solution, it reacts with the H⁺ ions and forms more HCO₃⁻ ions, causing a shift in the equilibrium. The reaction is:

NaHCO₃(aq) + H⁺ → Na⁺(aq) + H₂CO₃(aq)

The addition of NaHCO₃ increases the concentration of HCO₃⁻ and decreases the concentration of H₂CO₃, which causes the equilibrium to shift to the left. This results in a decrease in [H⁺] and an increase in pH.

To find the pH after adding NaHCO₃, we need to calculate the new concentrations of H+ and HCO₃⁻ using an ICE table. Assuming that the initial concentration of H₂CO₃ does not change significantly, we can set up the table as follows:

                     H₂CO₃(aq) + H₂O(l) ⇌ H₃O⁺(aq) + HCO₃⁻(aq)
Initial:              1.2 x 10⁻⁵ M   0 M         0 M          0 M
Change:             -x                -x             +x            +x
Equilibrium:    1.2 x10⁻⁵ - x    0 - x          x              x

Since the initial concentration of H₂CO₃ is much larger than the amount of H⁺ that will be consumed by the reaction, we can assume that x is negligible compared to the initial concentration. Therefore, we can simplify the expression to:

[H⁺] ≈ x = [HCO₃⁻]

Using the equilibrium expression for the dissociation of HCO₃⁻, we can find the new [HCO₃⁻] concentration:

Ka = [H⁺][CO₃-2]/[HCO₃⁻]
4.3 x 10⁻⁷ = x2 / (1.2 x 10-5 + x)
x = 2.4 x 10⁻⁴ M

Therefore, the new [H⁺] and [HCO₃⁻] concentrations are both 2.4 x 10⁻⁴ M.

The new pH can be calculated using the same equation as before:

pH (after) = -log(2.4 x 10⁻⁴) = 9.53

So, the pH of the solution increases from 5.64 to 9.53 after adding NaHCO₃.

Learn more about weak acid at https://brainly.com/question/24018697

#SPJ11

Magnesium chloride is a compound that is commonly used in a variety of industries, including food, pharmaceuticals, and water treatment.

It is produced by combining magnesium metal with hydrochloric acid. The reaction between magnesium and hydrochloric acid produces hydrogen gas and magnesium chloride.

The first stage of the production of magnesium chloride is the preparation of the magnesium metal. This metal is obtained from its natural ore, which is purified by various processes. Once the magnesium is purified, it is cut into small pieces or shaved into fine strips to increase the surface area.

The next stage involves the preparation of hydrochloric acid. This acid is obtained by reacting hydrogen gas with chlorine gas. The resulting hydrochloric acid is then purified and concentrated to the desired strength.

The third stage is the actual reaction between the magnesium metal and hydrochloric acid. The magnesium metal is added to the hydrochloric acid, and the reaction produces hydrogen gas and magnesium chloride. The hydrogen gas is released into the atmosphere, while the magnesium chloride is collected and purified.

Finally, the magnesium chloride is processed and packaged for use in various industries. It is typically sold in a variety of forms, including flakes, pellets, and powder. Magnesium chloride is widely used for de-icing roads, as a coagulant in water treatment, and as a source of magnesium in food and pharmaceutical products.

In summary, the production of magnesium chloride involves the stages of preparing the magnesium metal, preparing the hydrochloric acid, reacting the two substances, and processing and packaging the resulting magnesium chloride.

To know more about Magnesium chloride, visit:

https://brainly.com/question/15296925#

#SPJ11

He can do this either by changing the temperature to 150 kelvins or by changing the pressure to 200 kilopascals.

The ideal gas law is a fundamental principle in thermodynamics and describes the behavior of ideal gases under various conditions. It is mathematically represented by the equation:

PV = nRT

where:

P is the pressure of the gas,

V is the volume of the gas,

n is the number of moles of the gas,

R is the ideal gas constant, and

T is the absolute temperature of the gas.

The ideal gas law relates the pressure, volume, temperature, and amount of gas (number of moles) in a system. It assumes that the gas molecules do not interact with each other and occupy negligible volume compared to the total volume of the container. The ideal gas law allows for the calculation of any one of the variables (pressure, volume, temperature, or number of moles) if the other three are known.

Based on the Ideal Gas Equation,

V ∝ T

V ∝ 1/P

Using T :

V₁/T₁ = V₂/T₂

200/300 = 100/T₂

T₂ = 100/200 x 300

T₂ = 0.5 x 300

T₂ = 150 K

Using P :

P₁V₁ = P₂V₂

100 x 200 = P₂ x 100

P₂ = 200 kPa

Learn more about Ideal gas Equation, here:

https://brainly.com/question/30935329

#SPJ12

The mass of copper in the penny is 15.84 grams.

The mass of copper in a penny can be calculated by multiplying the number of copper atoms present in the penny with the molar mass of copper.

Given that the penny contains 1.5 x 10²³ atoms of copper, we can use the Avogadro's constant to convert the number of atoms to moles.

1 mole of any substance contains 6.022 x 10²³ particles, which is the Avogadro's constant.

Number of moles of copper in the penny = 1.5 x 10²³ / 6.022 x 10²³ = 0.249 mol

The mass of copper in the penny can then be calculated using the molar mass of copper, which is 63.55 g/mol.

Mass of copper in penny = Number of moles x Molar mass

Mass of copper in penny = 0.249 mol x 63.55 g/mol

Mass of copper in penny = 15.84 g

To know more about molar mass , refer here:

https://brainly.com/question/22997914#

#SPJ11

Benign and malignant are terms used to describe different types of tumors.

A benign tumor is a mass of cells that grows slowly and does not invade nearby tissue or spread to other parts of the body. It is typically encapsulated, meaning it is surrounded by a membrane that separates it from surrounding tissues.

While it is still considered abnormal, it is usually not life-threatening and can often be removed with surgery. Benign tumors do not metastasize or spread to other parts of the body.

On the other hand, a malignant tumor is cancerous and has the ability to spread to other parts of the body through the bloodstream or lymphatic system. Malignant tumors grow rapidly and invade nearby tissue, which can cause damage to organs and structures in the body.

These tumors can also interfere with the normal functioning of organs, leading to serious health problems. Malignant tumors are usually treated with a combination of surgery, radiation, and chemotherapy.

To know more about tumors refer to-

https://brainly.com/question/14143650

#SPJ11

We can deduce from the computations that the mass of the acetic acid produced is 28.2 g.

The reactant that is totally consumed during a chemical reaction involving two or more reactants is known as the limiting reactant. This limits the amount of product that can be generated. Excess reactants are the additional reactant(s) that are still present after the limiting reactant has been completely consumed.

CH3CHO's molecular weight is 20.8 g/44 g/mol.

= 0.47 moles

O2 molecular weight is 14.5 g/32 g/mol.

= 0.45 moles

If 1 mole of O2 interacts with 2 moles of CH3CHO

CH3CHO containing 0.47 moles would react with 0.47 * 1/2.

= 0.24 moles

Thus, the limiting reactant is CH3CHO.

Acetic acid mass produced is 0.47 moles * 60 g/mol.

= 28.2 g

Learn more about acetic acid:brainly.com/question/15202177

#SPJ1

The pH value of the mentioned solution is calculate out being  2.76. The percent ionization of the acid is calculate being nearly 3.8%. And the Ka value of the acid is found out to be  1.75×10⁻³.

In the way to get pH of the solution, we ar needed to utilize the formula:

pH = -log[H⁺]

here, [H⁺] is defined as the concentration of the hydrogen ion in moles per liter (M).

As per given [H⁺] = 1.75×10⁻³ M, we have:

pH = -log(1.75×10⁻³) = 2.76

Therefore, the pH of the mentioned solution is found out being 2.76.

In order to calculate the percent ionization of the acid, we can utilize the formula: % ionization = [H⁺] / [HA] × 100%

( [HA] is the initial concentration of the acid in moles per liter (M))

The [HA] can be calculated using the information that the solution is 0.0460 M, so:

[HA] = 0.0460 M

% ionization = [H⁺] / [HA] × 100% = (1.75×10⁻³ / 0.0460) × 100% ≈ 3.8%

Therefore, the percent ionization of the acid is calculate being nearly 3.8%.

To get the Ka value of the acid, we can use the expression:

Ka = [H⁺]² / [A⁻]

Here, [A⁻] is the concentration of the conjugate base of the acid in moles every liter (M).

The presented acid is a weak acid, so it dissociates according to the equation:

HA ⇌ H⁺ + A⁻

From this equation above , we can find and get that the initial concentration of the conjugate base [A⁻] calculated being almost equal to the concentration of the hydrogen ion [H⁺] because the acid is only slightly ionized. Therefore, we have: [A⁻] = [H⁺] = 1.75×10⁻³ M

putting it in this in order to find Ka, we will get:

Ka = [H⁺]² / [A⁻] = (1.75×10⁻³)² / (1.75×10⁻³) = 1.75×10⁻³. Hence, the Ka value of the acid is calculated being 1.75×10⁻³.

Learn more about Ionization :

https://brainly.com/question/1602374

The complete question is :

A 0.0460 M solution of an organic acid has an [H⁺] of 1.75×10⁻³ M . Using the values above, calculate the pH of the solution. What is the percent ionization of the acid? Calculate the Ka value of the acid.

Answer:

[tex]H _{2} SO _{4}+NaOH→NaSO _{4} +H _{2} O[/tex]

hope it helps:)

The equilibrium position of the system used to produce methanol from carbon monoxide and hydrogen can be altered by a change in the concentration of any of the reactants or products, a change in temperature, or a change in pressure.

If the concentration of carbon monoxide or hydrogen is increased, then the equilibrium position will shift to the right, favoring the formation of methanol. Conversely, if the concentration of methanol is increased, then the equilibrium position will shift to the left, favoring the decomposition of methanol into carbon monoxide and hydrogen.

If the temperature is increased, then the equilibrium position will shift to the right, as the forward reaction is exothermic and the reverse reaction is endothermic. Conversely, if the temperature is decreased, then the equilibrium position will shift to the left.

If the pressure is increased, then the equilibrium position will shift to the side with fewer moles of gas. In this case, both the reactants and the products have the same number of moles of gas, so the pressure will have no effect on the equilibrium position.

In summary, changes in concentration, temperature, and pressure can all alter the equilibrium position of the system used to produce methanol from carbon monoxide and hydrogen. By understanding how these changes affect the system, it is possible to manipulate the equilibrium position to maximize the yield of methanol.

To know more about carbon monoxide, visit:

https://brainly.com/question/22530423#

#SPJ11

Hi! You asked about ethylene glycol, which is the main ingredient in antifreeze used in car radiators due to its low freezing point. You want to determine the molality of a solution that will cause an 8.26 °C change in the freezing point of water, given that the Kf of water is 1.86 kg/mol°C and i = 1.

To calculate the molality (m), we can use the formula:

ΔTf = i * Kf * m

Where ΔTf is the change in freezing point, i is the van't Hoff factor, Kf is the cryoscopic constant, and m is the molality. We're given ΔTf = 8.26 °C, Kf = 1.86 kg/mol°C, and i = 1.

Rearranging the formula to solve for molality (m):

m = ΔTf / (i * Kf)

Substituting the given values:

m = 8.26 / (1 * 1.86)

m ≈ 4.44 mol/kg

So, the molality of the ethylene glycol solution that will cause an 8.26 °C change in the freezing point of water is approximately 4.44 mol/kg.

Learn more about "Ethylene Glycol": https://brainly.com/question/14469428

#SPJ11

There are 0.0025 moles of hydrogen ions present in the flask and the expression that shows how to find it is : moles H+ = Molarity × Volume in liters

The expression to find the moles of hydrogen ions present in the flask is:

moles H+ = Molarity × Volume in liters

First, we need to convert the volume of the solution from milliliters to liters:

Volume = 25.00 mL = 25.00 ÷ 1000 L = 0.02500 L

Substituting the given values into the expression, we get:

moles H+ = 0.10 M × 0.02500 L = 0.002500 mol

Therefore, there are 0.0025 moles of hydrogen ions present in the flask.

To know more about hydrogen ions, here

brainly.com/question/14736709

#SPJ4

The mass of iron (III) oxide produced when 3.88 x 10²⁵ molecules of oxygen react with excess iron is 685.58 grams.

Determine the moles of oxygen molecules:
Number of moles = Number of molecules / Avogadro's number
Number of moles = 3.88 x 10²⁵ molecules / 6.022 x 10²³ molecules/mol
Number of moles = 6.44 moles of O₂

Use the balanced chemical equation to find the moles of Fe₂O₃ produced:
4Fe + 3O₂ → 2Fe₂O₃
Since 3 moles of O₂ react to produce 2 moles of Fe₂O₃
=(6.44 moles O₂) x (2 moles Fe₂O₃ / 3 moles O₂)

= 4.29 moles Fe₂O₃

Molar mass of Fe₂O₃ =

2(55.85) + 3(16.00) = 159.70 g/mol

Calculate the mass of Fe₂O₃ produced:
mass = moles x molar mass
mass = 4.29 moles x 159.70 g/mol
mass = 685.58 g

Therefore, when 3.88 x 1025 molecules of oxygen react with excess iron, 685.58 grams of iron (III) oxide are produced.

To learn more about molar mass visit:

https://brainly.com/question/837939

#SPJ11

The statement that "all strong acids and bases appear equally strong in H₂O" is not entirely accurate. However, it is true that in water, the strongest acid possible is H₃O⁺ (hydronium ion), while the strongest base possible is OH⁻ (hydroxide ion).

In both cases, the equilibrium favors the dissociation products, meaning that the acids and bases fully ionize in water. Water also exerts an effect on any strong acid or base, as it can stabilize the charged ions produced by dissociation. Overall, the strength of an acid or base in water is determined by its dissociation constant (Ka for acids and Kb for bases). Stronger acids and bases have higher dissociation constants, meaning that they will ionize more readily and appear more "strong" in water.

To know more about strong acids and bases :

https://brainly.com/question/13263329

#SPJ11