How many joules are required to raise the temperature of 100.0 grams of water from -269 degrees celsius to 1500 degrees celsius

The correct answer is: The dianion can form a resonance-stabilized conjugated ring, which tends to absorb visible light.

The correct answer is: The dianion can form a resonance-stabilized conjugated ring, which tends to absorb visible light.

In the first part of the experiment, the reagents used are benzidine and hydrogen peroxide, which react to form a compound called a dianion. This dianion is initially colorless, but when sodium hydroxide is added, it causes the dianion to undergo a rearrangement that forms a resonance-stabilized conjugated ring. This conjugated ring absorbs visible light in the blue-green range, which causes the solution to appear red. This color change is used as an indicator for the presence of blood in forensic and medical labs because benzidine and its derivatives are known to react with the heme group found in blood to form a similar colored proproductduct.
Visit to know more about conjugated ring:-

https://brainly.com/question/15047805

#SPJ11

There are approximately 3.40 x 10²⁴ molecules in 9.44 moles of AlCl₃.

This is calculated by using Avogadro's number (6.022 x 10²³) and multiplying it by the number of moles given.


To calculate the number of molecules in a given amount of substance, we use Avogadro's number, which is 6.022 x 10²³. This number represents the number of particles (molecules, atoms, ions) in one mole of a substance.

In this case, we are given the number of moles of AlCl₃, which is 9.44. To calculate the number of molecules, we simply multiply the number of moles by Avogadro's number:

9.44 moles AlCl₃ x 6.022 x 10²³ molecules/mole = 3.40 x 10²⁴ molecules AlCl₃

Therefore, there are approximately 3.40 x 10²⁴ molecules in 9.44 moles of AlCl₃.

To know more about Avogadro's number click on below link:

https://brainly.com/question/28812626#

#SPJ11

The addition of more [tex]SO2[/tex] to the reaction at equilibrium, [tex]2 SO2(g) + O2(g) ↔ 2 SO3(g) + heat[/tex], will increase the rate of the forward reaction. This is because the forward reaction is an exothermic reaction, meaning it releases heat. The correct answer is option d.

According to Le Chatelier's principle, adding more [tex]SO2[/tex] will shift the equilibrium position to the right and favor the forward reaction, leading to an increase in the concentration of the products, [tex]SO3[/tex].

As the concentration of [tex]SO3[/tex] increases, the rate of the forward reaction will increase due to an increase in the number of molecular collisions between reactants. Therefore, adding more[tex]SO2[/tex] will increase the rate of the forward reaction, favoring the production of [tex]SO3[/tex].

The correct answer is option d.

To know more about Le Chatelier's principle refer to-

https://brainly.com/question/29009512

#SPJ11

In building a brand new city in America without using coal or gas, I would choose to use fission nuclear reactors over fusion nuclear reactors.

The reason behind choosing fission nuclear reactors is that they are currently more developed and widely used in practice than fusion nuclear reactors.

Fission reactors have proven their efficiency and safety in generating power for decades.

Fusion nuclear reactors, while having the potential for greater energy output and fewer radioactive waste issues, are still in the experimental stage and not yet commercially viable.

As a city planner, it's crucial to prioritize reliable and established energy sources for the city's needs. Therefore, using fission nuclear reactors would be a more feasible and practical choice for powering a new city in America.

To know more about nuclear fission visit:

https://brainly.com/question/29541275

#SPJ11

The amount of pressure on the sample of gas after compression is 4.67 atm.

The initial volume and pressure of the gas are 14 m³ and 3.0 atm, respectively. After the gas is compressed, its volume becomes 9.0 m³. We can use the combined gas law to determine the final pressure of the gas:

[tex]P_1V_1 / T_1 = P_2V_2 / T_2[/tex]

where[tex]P_1, V_1,\ and\ T_1[/tex]are the Initial pressure, volume, and temperature of the gas, respectively, and [tex]P_2, V_2,\ and\ T_2[/tex] are the final pressure, volume, and temperature of the gas, respectively.

Assuming the temperature is constant, we can simplify the equation to:

[tex]P_2 = (P_1 * V_1) / V_2[/tex]

Substituting the given values, we get:

[tex]P_2[/tex] = (3.0 atm * 14 m³) / 9.0 m³

[tex]P_2[/tex]= 4.67 atm

To know more about Initial volume, here

brainly.com/question/2454734

#SPJ4

The rate of change of total pressure in a vessel during a reaction depends on the stoichiometry of the reaction and the behavior of the reactants and products with respect to pressure.

In general, if the reaction involves the production or consumption of gases, the total pressure in the vessel will change as the reaction proceeds. The rate of change of total pressure can be calculated using the ideal gas law, which relates the pressure, volume, and temperature of a gas:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature.

If the number of moles of gas changes during the reaction, the pressure will change accordingly. The rate of change of pressure can be calculated using the following equation:

ΔP/Δt = (Δn/Δt)RT/V

where ΔP/Δt is the rate of change of pressure, Δn/Δt is the rate of change of the number of moles of gas, R is the ideal gas constant, T is the temperature, and V is the volume.

Therefore, to determine the rate of change of total pressure in a vessel during a reaction, it is necessary to know the stoichiometry of the reaction and the behavior of the reactants and products with respect to pressure.

To know more about stoichiometry refer to-

https://brainly.com/question/30215297

#SPJ11

Sports drink helps to ensure that the body has enough sodium to maintain proper hydration levels and to prevent dehydration.

Electrolytes play a crucial role in various bodily functions, including muscle contractions, nerve impulses, and regulating fluid balance. This is important because the movement of ions across cell membranes is what generates electrical signals in the body. When a person perspires, the sweat that is released from their body contains both sodium and potassium ions. These ions are lost through the process of sweating. However, the evaporation of sweat helps to cool the skin.

After a strenuous workout, it is important to replenish the lost electrolytes by drinking sports drinks that contain NaCl (sodium chloride) and KCl (potassium chloride). For example, a single 250-gram serving of one sports drink contains 0.055 grams of sodium ions. This replaces the lost electrolytes and help maintain proper fluid balance in the body.

In conclusion, after a strenuous workout, it is essential to replenish the lost sodium ions and potassium ions to maintain the body's electrolyte balance and ensure proper muscle and nerve function. Thus, Sports drinks containing NaCl and KCl can be an effective way to replace these ions and quench thirst.

The question should be:

When a person perspires (sweats), the body loses many sodium ions and potassium ions. The evaporation of sweat cools the skin. After a strenuous workout, people often quench their thirst with sports drinks that contain NaCl and KCl. A single 250gram serving of one sports drink contains 0. 055 gram of sodium ions.  How sports drinks containing NaCl and KCl can be an effective way to replace these ions?

To learn more about electrolytes visit:

https://brainly.com/question/17089766

#SPJ11

To calculate the amount of heat required to warm 400 g of ethanol from 25.0°C to 40.0°C, we need to use the following formula:

Q = m * c * ΔT

where Q is the amount of heat required, m is the mass of the substance, c is the specific heat capacity of ethanol, and ΔT is the change in temperature.

The specific heat capacity of ethanol is 2.44 J/(g·°C), and the change in temperature is:

ΔT = 40.0°C - 25.0°C = 15.0°C

Now we can use the formula to calculate the amount of heat required:

Q = 400 g * 2.44 J/(g·°C) * 15.0°C = 18360 J

Therefore, 18,360 J of heat is required to warm 400 g of ethanol from 25.0°C to 40.0°C.

To know more about required refer here

https://brainly.com/question/2929431#

#SPJ11

When a wave passes through water, the particles of water move in a circular motion, which is often described as an orbital motion.

The circular motion of water particles is created by the energy of the wave, which causes the water to oscillate up and down or back and forth in the same place.

As the wave moves through the water, the energy is transferred from particle to particle in a circular motion, causing the water to move in a wave pattern that travels outward from its source. This circular motion is why water waves do not carry water particles along with them, but rather simply transfer energy through the water.

This motion is also what creates the phenomena of waves breaking on shorelines, as the circular motion of water particles becomes disrupted by the shallow water and causes the wave to collapse.

To know more about circular motion refer to-

https://brainly.com/question/2285236

#SPJ11

The ideal gas law states that the pressure of a gas is directly proportional to its temperature when held at a constant volume. This means that when the pressure is decreased, the temperature must also decrease.

To calculate the new temperature, use the equation P1/T1 = P2/T2, where P1 is the original pressure, T1 is the original temperature, P2 is the new pressure, and T2 is the new temperature.

Using the values given in the question, we get 1150/75.0 = 760/T2. Solving for T2, we get T2 = 49.6°C. Therefore, the final temperature of the gas is 49.6°C.

Know more about Ideal gas law here

https://brainly.com/question/28257995#

#SPJ11

The correlation coefficient and the coefficient of determination are two statistical terms that are often used to measure the relationship between two variables.

The correlation coefficient, also known as Pearson's correlation coefficient (r), is a measure of the strength and direction of the linear relationship between two variables. It ranges from -1 to 1, where -1 indicates a strong negative relationship, 1 indicates a strong positive relationship, and 0 indicates no relationship.

To calculate the correlation coefficient, you will need to find the covariance of the variables, as well as their standard deviations, and then divide the covariance by the product of the standard deviations.

On the other hand, the coefficient of determination (R²) is a measure of how much of the variance in one variable can be explained by the variance in another variable. It is the square of the correlation coefficient and ranges from 0 to 1.

A value of 0 indicates that none of the variance in the dependent variable can be explained by the independent variable, while a value of 1 indicates that 100% of the variance can be explained.

In summary, the correlation coefficient is a measure of the strength and direction of the relationship between two variables, while the coefficient of determination measures the proportion of variance in one variable that can be explained by the other variable.

Both of these coefficients are essential in understanding the relationship between variables and can be used to make predictions in various fields, such as finance, social sciences, and natural sciences.

To know more about correlation coefficient, visit:

https://brainly.com/question/15577278#

#SPJ11

According to the question the mass of Ag₂S produced is 0.063 g.

Mass is a measure of the amount of matter an object contains. It is usually measured in kilograms and grams, and is an important concept in physics and chemistry. Mass is related to other properties such as weight, density, and momentum. Mass can be determined either by measuring the object's weight in a gravitational field or by measuring its inertia, which is its resistance to acceleration caused by a force.

The amount of Ag₂S produced can be calculated using the molar ratio of the reactants and products in the equation: 4Ag + 2 H₂S + O2 → 2 Ag₂S + 2 H₂O
First, calculate the amount of each reactant in moles:
Ag: 0.950 g / 107.87 g/mol = 0.00877 mol
H₂S: 0.140 g / 34.08 g/mol = 0.0041 mol
O2: 0.08000 g / 32.00 g/mol = 0.0025 mol
Then, use the molar ratio to calculate the amount of Ag2S produced:
2 Ag₂S = 0.00877 mol x (2 mol Ag₂S/4 mol Ag) = 0.0044 mol
Therefore, the mass of Ag₂S produced is 0.0044 mol x 143.7 g/mol = 0.063 g.

To learn more about mass
https://brainly.com/question/837939
#SPJ4

The mass of [tex]Ag_2S[/tex] obtained from the given mixture is 1.015 g.

The given chemical equation shows that 4 moles of Ag react with 2 moles of [tex]H_2S[/tex] and 1 mole of [tex]O_2[/tex] to form 2 moles of [tex]Ag_2S[/tex] and 2 moles of [tex]H_2O[/tex].

To determine the mass of [tex]Ag_2S[/tex] produced, we need to find out the limiting reactant first. The limiting reactant is the reactant that is completely consumed during the reaction and limits the amount of product that can be formed.

We can find the limiting reactant by calculating the amount of product that can be formed from each reactant.

For Ag:

The molar mass of Ag is 107.87 g/mol. The number of moles of Ag present is:

0.950 g / 107.87 g/mol = 0.00880 mol

The amount of [tex]Ag_2S[/tex] that can be formed from 0.00880 mol of Ag is:

0.00880 mol Ag x (2 mol [tex]Ag_2S[/tex] / 4 mol Ag) = 0.00440 mol [tex]Ag_2S[/tex]

For [tex]H_2S[/tex]:

The molar mass of [tex]H_2S[/tex] is 34.08 g/mol. The number of moles of [tex]H_2S[/tex] present is:

0.140 g / 34.08 g/mol = 0.00410 mol

The amount of [tex]Ag_2S[/tex] that can be formed from 0.00410 mol of [tex]H_2S[/tex] is:

0.00410 mol [tex]H_2S[/tex] x (2 mol [tex]Ag_2S[/tex] / 2 mol [tex]H_2S[/tex]) = 0.00410 mol [tex]Ag_2S[/tex]

For [tex]O_2[/tex]:

The molar mass of [tex]O_2[/tex] is 32.00 g/mol. The number of moles of [tex]O_2[/tex] present is:

0.08000 g / 32.00 g/mol = 0.00250 mol

The amount of [tex]Ag_2S[/tex] that can be formed from 0.00250 mol of [tex]O_2[/tex] is:

0.00250 mol [tex]O_2[/tex] x (2 mol [tex]Ag_2S[/tex] / 1 mol O2) = 0.00500 mol [tex]Ag_2S[/tex]

From the above calculations, we can see that the amount of [tex]Ag_2S[/tex] that can be formed from Ag is 0.00440 mol, from [tex]H_2S[/tex] is 0.00410 mol, and from [tex]O_2[/tex] is 0.00500 mol.

Since the smallest amount of [tex]Ag_2S[/tex] that can be formed is from [tex]H_2S[/tex], it is the limiting reactant. Therefore, the amount of [tex]Ag_2S[/tex] that can be formed is 0.00410 mol.

The molar mass of [tex]Ag_2S[/tex] is 247.80 g/mol. Therefore, the mass of [tex]Ag_2S[/tex] that can be formed is:

0.00410 mol [tex]Ag_2S[/tex] x 247.80 g/mol = 1.015 g [tex]Ag_2S[/tex] (rounded to three significant figures)

To learn more about mass

https://brainly.com/question/19694949

#SPJ4

Complete question:

What is the mass of Ag2S obtained from a mixture of 0.950 g Ag, 0.140 g of H2S, and 0.08000 g O2, according to the reaction 4Ag + 2H2S + O2 → 2Ag2S + 2H2O?

The equation for the dissociation of benzoic acid is:

C6H5COOH + H2O ↔ C6H5COO- + H3O+

The expression for Ka is:

Ka = [C6H5COO-][H3O+] / [C6H5COOH]

At equilibrium, the concentration of undissociated benzoic acid will be (0.35 - x), where x is the concentration of dissociated benzoic acid.

Assuming x is small compared to 0.35, we can make the approximation that the concentration of undissociated benzoic acid is 0.35. Therefore, we can write:

Ka = x^2 / (0.35 - x)

Solving for x, we get:

x = √(Ka × (0.35 - x))

x = √(6.3 × 10^-5 × 0.35 - 6.3 × 10^-5 × x)

Squaring both sides:

x^2 = 6.3 × 10^-5 × 0.35 - 6.3 × 10^-5 × x

Bringing all the x terms to one side:

x^2 + 6.3 × 10^-5 × x - 6.3 × 10^-5 × 0.35 = 0

Using the quadratic formula:

x = [-6.3 × 10^-5 ± √(6.3 × 10^-5)^2 + 4 × 6.3 × 10^-5 × 0.35] / 2

x = [-6.3 × 10^-5 ± 1.37 × 10^-3] / 2

x = 6.46 × 10^-4 or x = -7.03 × 10^-5

Since the concentration of benzoic acid cannot be negative, we choose the positive root:

x = 6.46 × 10^-4

The concentration of H3O+ ions is equal to x, so the pH of the solution is:

pH = -log[H3O+]

pH = -log(6.46 × 10^-4)

pH = 3.19

Therefore, the pH of a 0.35 m solution of benzoic acid is 3.19.

To know more about dissociation refer here

https://brainly.com/question/28330679#

#SPJ11

Valence electrons are the outermost electrons of an atom, and they play a significant role in determining the atom's chemical properties, including its reactivity.

Valence electrons are responsible for the formation of chemical bonds between atoms, which are essential for the creation of molecules and compounds.

An atom's valence electrons determine its ability to form bonds and interact with other atoms. The number of valence electrons an atom possesses corresponds to its position on the periodic table. For example, elements in the same group of the periodic table have the same number of valence electrons and exhibit similar chemical properties.

Atoms with a full valence shell, such as noble gases, are stable and unreactive because they have no need to form bonds with other atoms. On the other hand, atoms with incomplete valence shells are more reactive and have a strong tendency to bond with other atoms to achieve a full valence shell.

For example, halogens have seven valence electrons and are highly reactive because they only need one more electron to achieve a full valence shell.

The reactivity of an atom depends on the number of valence electrons it has and its ability to form chemical bonds. Atoms with one or two valence electrons tend to lose them to form positive ions, while atoms with five, six, or seven valence electrons tend to gain electrons to form negative ions.

This behavior is due to the fact that a full valence shell is more stable than an incomplete one.

In conclusion, valence electrons are crucial in determining an atom's chemical properties, including its reactivity. The number of valence electrons an atom possesses determines its position in the periodic table and its ability to form chemical bonds with other atoms, which ultimately affects its behavior in chemical reactions.

To know more about Valence electrons, visit:

https://brainly.com/question/28977387#

#SPJ11

The substances that can create a pH = 4 buffer solution are HCO₂H and KHCO₂.

When modest quantities of acid or base are added to a buffer solution, it resists changes in pH. In order to create a buffer solution, we need to have a weak acid and its conjugate base, or a weak base and its conjugate acid, in roughly equal amounts.

HCO₂H is a weak acid with a pKa of 3.74, and its conjugate base is HCO₂⁻. KHCO₂ is the potassium salt of HCO₂⁻, and it acts as a source of HCO₂⁻ ions, making it a good buffer component.

The other substances listed are not suitable for creating a pH = 4 buffer solution because they either do not have a pKa or pKb near 4, or they are neither a pair of a weak acid and its conjugate base, or a pair of a weak base and its conjugate acid..

To learn more about buffer solution, here

https://brainly.com/question/24262133

#SPJ4

All else being equal, a reaction with a higher activation energy will have a slower reaction rate compared to one with a lower activation energy.

Activation energy refers to the minimum amount of energy required for a chemical reaction to occur. The higher the activation energy, the more energy is required to initiate the reaction, and thus the slower the reaction rate.

This is because a higher activation energy means that fewer reactant molecules will have enough energy to overcome the energy barrier and form products. Therefore, reactions with higher activation energies require more energy input to proceed and will typically have a slower reaction rate than those with lower activation energies.

To know more about the Activation energy, here

https://brainly.com/question/29016918

#SPJ4

To calculate the volume of 0.75 M KCl solution required to obtain 2.0 moles of the solute, we can use the formula:

moles = concentration x volume

Rearranging this formula, we get:

volume = moles / concentration

Substituting the given values, we get:

volume = 2.0 moles / 0.75 M

volume = 2.67 L

Therefore, you would need 2.67 liters of 0.75 M KCl solution to obtain 2.0 moles of the solute.

To know more about volume refer here

https://brainly.com/question/28058531#

#SPJ11

The mass of B1 is one-half of the total mass of the mixture before any salt or water is added.The mass of B1 is 1582.5 lbm.

Mixture is a combination of two or more substances that are not chemically combined. Mixtures can be either homogeneous, meaning the substances are uniformly dispersed, or heterogeneous, meaning the substances are not evenly distributed. Examples of mixtures include sand and water, sugar and water, and salt and pepper.

Since we are given that the total mass of the mixture is 3200 lbm and that 35 lbm of salt will be added, the total mass of the mixture before the salt and water are added is 3165 lbm.Since B2 is 4.5% salt, we can calculate the salt mass of B2 by multiplying 4.5 by the total mass of B2. Thus, the salt mass of B2 is 4.5 * 1582.5 lbm = 7162.5 lbm. Since we are given that 35 lbm of salt will be added, we can calculate the total mass of B2 before the salt and water are added by subtracting 35 lbm from 7162.5 lbm. Thus, the total mass of B2 before the salt and water are added is 7127.5 lbm. e B3 is 5.5% salt, we can calculate the salt mass of B3 by multiplying 5.5.

To learn more about mixture

https://brainly.com/question/24647756

#SPJ4

To prepare a hydroponic solution with 35 mg/L of phosphorus in a 500 mL volume, you will need to dilute the concentrated calcium dihydrogen phosphate solution.

Firstly, calculate the volume of the concentrated solution required to make the desired concentration. You can apply the formula here:

C1V1 = C2V2

Where C1 is the concentration of the concentrated solution (200 mg/L), V1 is the volume of concentrated solution required, C2 is the desired concentration (35 mg/L), and V2 is the final volume of the solution (500 mL).

Substituting these values, we get:

(200 mg/L) V1 = (35 mg/L) (500 mL)

V1 = (35 mg/L) (500 mL) / (200 mg/L)

V1 = 87.5 mL

So, you need 87.5 mL of the concentrated solution to make 500 mL of the final solution with a phosphorus concentration of 35 mg/L.

To prepare the final solution, measure 87.5 mL of the concentrated solution and add it to a measuring cylinder. Add distilled water to make the remaining 500 mL, and then. Mix the solution well to ensure that the calcium dihydrogen phosphate is evenly distributed.

This will give you a hydroponic solution with a phosphorus concentration of 35 mg/L, which falls within the common range of elemental phosphorus required for growing lettuce.

What is hydroponic solution?

A Hydroponic solution, also known as hydroponic nutrient solution, is a specially formulated liquid mixture of nutrients that is used to grow plants hydroponically. Hydroponics is a method of growing plants in a soil-free medium, where the roots of the plants are suspended in a nutrient-rich solution.

A 0.625 g sample of unknown weak acid is titrated with 0.1 M NaOH. So, the molecular mass of the unknown acid is 139.0 g/mol. The pKa of the unknown acid is 8.25.

Here are the step by step solutions for the given question:

(a) To determine the molecular mass of the unknown acid, we need to first find the number of moles of NaOH used in the titration. From the concentration and volume of NaOH used, we have:

0.100 mol/L x 0.045 L = 0.0045 mol NaOH

Since the acid and base react in a 1:1 ratio, we know that the number of moles of acid in the sample is also 0.0045 mol. Using the mass of the sample and the number of moles of acid, we can find the molecular mass:

Molecular mass = mass/number of moles = 0.625 g / 0.0045 mol = 139.0 g/mol

Therefore, the molecular mass of the unknown acid is 139.0 g/mol.

(b) At the equivalence point, the number of moles of NaOH added is equal to the number of moles of acid originally present in the sample. Therefore, we can use the concentration of the NaOH solution and the volume of NaOH used to calculate the initial concentration of the acid, [HA]:

0.100 mol/L x 0.045 L = 0.0045 mol NaOH

0.0045 mol NaOH = 0.0045 mol HA

[HA] = 0.0045 mol / 0.025 L = 0.18 mol/L

Next, we can use the Henderson-Hasselbalch equation to find the pKa of the acid:

pKa = pH + log([A-]/[HA])

At the equivalence point, all of the acid has been converted to its conjugate base, so [A-] = [HA]. We can assume that the pH at the equivalence point is equal to the pKa of the acid. Substituting these values into the Henderson-Hasselbalch equation:

8.25 = pKa + log(1)

pKa = 8.25

Therefore, the pKa of the unknown acid is 8.25.

To know more about the equivalence point refer here :

https://brainly.com/question/31671460#

#SPJ11

The alpha decay of the isotope of the element produces lead-206 is the polonium (Po)- 210.

Alpha decay is the process, the alpha particles is the emitted when the heavier nuclei decays into the lighter nuclei. Then the  alpha particle released has the charge of the +2 units.

The representation of the alpha decay is as :

[tex]X^{A}{z} }[/tex] --->  Y⁴₂  +  α⁴₂

Y⁴₂  = Pb²⁰⁶₈₂

Z - 2 = 82

Z = 84

A - 4 = 206

A = 210

The atomic mass, A = 210

The atomic number, Z = 84

Therefore, the element is the polonium (Po) that has the atomic number is the 84 and the atomic mass is the 210.

To learn more about isotopes here

https://brainly.com/question/787643

#SPJ4

To calculate the solubility of a gas when the pressure increases, the ideal gas law can be used. According to the law, the solubility of a gas is inversely proportional to pressure, meaning that as the pressure increases, the solubility decreases. T

herefore, if the pressure increases from 345 atm to 445 atm, the solubility will decrease.

Using the equation S1/P1 = S2/P2, the new solubility can be calculated. The equation can be rearranged to S2 = (S1 x P2) / P1. Plugging in the given values, the new solubility at 445 atm is 1.97 g/L. This is a decrease of 0.39 g/L.

In conclusion, when the pressure of a gas increases, its solubility decreases. Using the ideal gas law, the new solubility can be calculated using the equation S2 = (S1 x P2) / P1. In this case, the solubility of a gas decreased from 2.36 g/L to 1.97 g/L when the pressure increased from 345 atm to 445 atm.

Know more about Ideal gas law here

https://brainly.com/question/28257995#

#SPJ11

Answer:

0.79 L of concentrated nitric acid is needed to prepare 5.0 L of a 2.5 M solution.

Explanation:

We can use the formula:[tex]M_1V_1 = M_2V_2[/tex]where [tex]M_1[/tex] is the concentration of the concentrated nitric acid, [tex]V_1[/tex] is the volume of concentrated nitric acid needed, [tex]M_2[/tex] is the desired concentration of the final solution, and [tex]V_2[/tex] is the final volume of the solution.Plugging in the given values, we get:[tex](15.8 \text{ M})(V_1) = (2.5 \text{ M})(5.0 \text{ L})[/tex]Solving for [tex]V_1[/tex], we get:[tex]V_1 = \frac{(2.5 \text{ M})(5.0 \text{ L})}{15.8 \text{ M}} \approx 0.79 \text{ L}[/tex]Therefore, approximately 0.79 L of concentrated nitric acid is needed to prepare 5.0 L of a 2.5 M solution.

Answer:

0.79 L

I hope this helps! Cheers ^^

Answer:

Mechanical energy is the total amount of kinetic energy and potential energy of an object.

It can also be defined as the energy of an object due to either its motion or position or both.

Hope this helps!

pls like and mark as brainliest!

Answer:

Energy possessed by a machine.

The concentration of arsenic in the water is 12 ppm, which is higher than the legal limit of 0.05 ppm, the sample of drinking water is not within the legal limit for arsenic. Therefore, action needs to be taken to reduce the level of arsenic in the water to make it safe for drinking.

The concentration of arsenic in the water can be calculated as follows:

Concentration (ppm) = (Mass of arsenic / Mass of water) x 1,000,000

In this case, the mass of arsenic is 0.0012 grams and the mass of water is 100 grams. Substituting these values into the formula, we get:

Concentration (ppm) = (0.0012 g / 100 g) x 1,000,000

Concentration (ppm) = 12 ppm

To know more about arsenic, here

brainly.com/question/493434

#SPJ1

5.2 moles of aluminum reacting with excess iron (III) oxide would release 2210 J of energy and 4.9 g of aluminum reacting with excess iron (III) oxide would produce 38.5 J of energy.

To find out the amount of energy released when 5.2 moles of aluminum reacts with excess iron (III) oxide, we can use the given enthalpy change of the reaction and stoichiometry.

Using the balanced chemical equation,

2Al(s) + Fe₂O₃(s)→Al₂O₃(s) + 2Fe(s)

We can see that 2 moles of aluminum react with 1 mole of Fe₂O₃.

Now, we can calculate the energy released using the given enthalpy change,

ΔH = -850 J/2 moles Al × 5.2 moles Al = -2210 J

Therefore, the amount of energy released would be -2210 J. To calculate the amount of energy produced when 4.9 g of aluminum reacts with excess iron (III) oxide, we can first convert the given mass of aluminum to moles. The molar mass of aluminum is 26.98 g/mol, so the amount of moles of aluminum would be,

4.9 g Al × (1 mol Al / 26.98 g Al) = 0.181 mol Al

0.181 mol Al × (1mole Fe₂O₃/2moles Al)

= 0.0905 mol Fe₂O₃

Finally, we can calculate the energy produced using the given enthalpy change,

ΔH = -850 J/2 moles Al × 0.0905 moles Fe₂O₃ = -38.5 J. Therefore, the amount of energy produced would be -38.5 J.

To know more about energy of a reaction, visit,

https://brainly.com/question/3682966

#SPJ4

The strength of bonds formed and broken depends on the specific chemical reaction involved. In some reactions, the bonds formed are stronger than the bonds broken, while in other reactions, the opposite is true.

When a chemical reaction is exothermic, meaning that it releases energy, the bonds formed are typically stronger than the bonds broken. This is because energy is released when the bonds are formed, indicating that they are more stable and stronger than the bonds that were broken.

On the other hand, in an endothermic reaction, meaning that it absorbs energy, the bonds broken are usually stronger than the bonds formed. This is because energy is required to break the existing bonds, indicating that they are stronger and more stable than the new bonds that are formed.

To know more about chemical reaction, refer here:

https://brainly.com/question/29762834#

#SPJ11

The correct answer is e. The concentrations of H2 and HI will decrease as the system is approaching equilibrium.

the equilibrium concentration of HI is 1.18 x 10^-4 M.

The correct answer is e. The concentrations of H2 and HI will decrease as the system is approaching equilibrium.

This is because the equilibrium constant, Kc, for the reaction is 64, which is a relatively large value. This suggests that the forward reaction (2HI → H2 + I2) is favored at equilibrium, meaning that the concentration of HI will decrease as the system approaches equilibrium.

To calculate the equilibrium concentration of HI, we can use the equilibrium constant expression:

Kc = [H2][I2]/[HI]^2

Substituting the given values, we get:

64 = (4.2 x 10^-4)(1.9 x 10^-3)/[HI]^2

Solving for [HI], we get:

[HI] = sqrt((4.2 x 10^-4)(1.9 x 10^-3)/64) = 1.18 x 10^-4 M

Therefore, the equilibrium concentration of HI is 1.18 x 10^-4 M.
Visit to know more about equilibrium:-

https://brainly.com/question/517289

#SPJ11

Answer:

An acid

Explanation:

a metal oxide e.g NaOH +an acid e.g HCl=>salt e.g NaCl+water

The composition of the vapor and liquid in the mixture containing 60 mol% n-pentane and 40 mol% n-heptane is as follows:

Vapor composition: 75 mol% n-pentane, 25 mol% n-heptane
Liquid composition: 50 mol% n-pentane, 50 mol% n-heptane


1. Calculate the initial moles of each component:
  n-pentane: 100 mol * 0.6 = 60 mol
  n-heptane: 100 mol * 0.4 = 40 mol

2. Determine the moles of vapor produced:
  40 mol vapor = x mol n-pentane + y mol n-heptane

3. Calculate the moles of liquid remaining:
  60 mol liquid = (60 - x) mol n-pentane + (40 - y) mol n-heptane

4. Apply the equilibrium condition:
  x / (60 - x) = y / (40 - y)

5. Solve the system of equations to find the moles of each component in the vapor and liquid phases:
  x = 30 mol n-pentane, y = 10 mol n-heptane

6. Calculate the vapor composition:
  n-pentane: 30 mol / 40 mol = 0.75 or 75%
  n-heptane: 10 mol / 40 mol = 0.25 or 25%

7. Calculate the liquid composition:
  n-pentane: (60 - 30) mol / 60 mol = 0.5 or 50%
  n-heptane: (40 - 10) mol / 60 mol = 0.5 or 50%

To know more about equilibrium condition click on below link:

https://brainly.com/question/13764087#

#SPJ11