Answer:
Initial velocity is independent of the slope of the graph; that is, the acceleration. An object thrown downward still accelerates after release at the same rate as an object that is dropped.
The formula for calculating density, D, is D=MV, where M represents mass and V represents volume.
For liquids, volume is often given in cubic centimeters (cc), which is the same as cm 3. If the density of an unknown liquid is 1.6 g/cc, what is the mass of 800 cc of the unknown liquid in grams (g)?
Answer:
Density 1.6g/cc means that every 1(one) cubic centimeter of the liquid has a mass of 1.6 grams.
Then, what about 800 cubic centimeters – how much mass, in grams, will it have ?
= 1.6 * 800 = 1280 g
Explanation:
Embarking on a road trip, you hope to average a speed of 90.0 km/hr. Driving through bad weather, you finally reach the midpoint (half the distance) of your trip, but realize that you have only been averaging 5.0 X 10^1 km/hr. How fast would you have to drive the second half of the trip to keep your desired arrival time? *
Answer:
Explanation:
average speed = 90 km / hr
Let the total distance be 2 d .
time required to cover the time = 2 d / 90
time taken to cover distance d at 50 km /h = d / 50
time required to cover the nd half = 2 d / 90 - d / 50
.02222 d - .02 d = .002222 d
speed required = d/2 / .002222d
1 / 2 x .002222
= 225 km /h .
When candle wax is heated enough, it becomes a liquid and flows. However, if it isn't heated, candle wax is a solid. Which of the following explains why liquid candle wax flows but solid wax does not?
○ the molecules of the Liquid wax are softer than the molecules of the solid matte wax.
○ The molecules of the liquid wax have less mass than the molecules of the solid wax.
○ The molecules of the liquid wax can easily move past one another but the molecules of the solid wax cannot.
Answer:
C
Explanation:
Two hockey players are about to collide on the ice, One player has a mass of
65 kg and is traveling at 1.8 m/s east. The other has a mass of 70 kg and is
traveling at 1.4 m/s west. The system consists of the two hockey players,
According to the law of conservation of momentum, what is the total
momentum of the system after they collide? Assume the collision is an
elastic collision
A. 19 kg'm/s east
B. 215 kgm/s east
C. 19 kgm/s west
D. 215 kgm/s west
Answer: 19kg•m/s east
Explanation:
The total momentum of the system after they collide will be equal to 19 kg m/s east. Hence, option A is correct.
What is momentum?The momentum is the result of a particle's velocity and its mass. Force and motion, meaning it has both magnitude and the direction. According to Isaac Newton's second equation of motion, the force acting on a particle equals the time rate of increase of momentum.
The impulse, which is the product of the force and the intervals (the impulse), is equal to the difference in momentum, according to Newton's 2nd law, if a steady force operates on a particle for a specific amount of time. On the other hand, a particle's momentum is the amount of time needed for a consistent action to fight it to rest.
As per the given information in the question,
Mass, m₁ = 65 kg
Mass, m₂ = 70 kg
Velocity, v₁ = 1.8 m/s
Velocity, v₂ = 1.4 m/s
Use the law of conservation of momentum,
P = m₁v₁ = m₂v₂
Here, P is the total momentum.
⇒ 65 × 1.8 = 78 × 1.4
= 117 east = 98 west
P = 117 - 98
P = 19 kg m/s east.
To know more about Momentum:
https://brainly.com/question/24030570
#SPJ2
How many joules of kinetic energy does the pendulum have when it has 50 J of potential energy?
Answer:
We do not have the information of the pendulum, so i will answer in a general way.
First, as you know, the total energy can be written as:
E = U + K
Where:
U = potential energy
K = kinetic energy.
Now, by the conservation of energy, we know that E does not change.
This means that if U increases an amount x, then K must decrease by the same amount.
Now, at the maximum height of the pendulum, the velocity is zero, this means that in this point the kinetic energy is 0j.
E = 0 + U
E = U.
Another thing that you may know about pendulums is that, if the initial displacement is by an angle θ, then the angle between the string and the vertical can never be more than θ.
And we know that:
U = m*g*h
in this case, we can write h, the maximum height, as:
h = L*(1 - cos(θ))
Where:
L is the length of the string, g is the gravitational acceleration and m is the mass of the pendulum.
Then the total energy of the pendulum is:
E = m*g*L*(1 - cos(θ))
And we had that:
E = K + U = m*g*L*(1 - cos(θ))
Then, if in a given point we have U = 50j, the kinetic energy must be:
K + 50j = m*g*L*(1 - cos(θ))
K = m*g*L*(1 - cos(θ)) - 50j
!PLEASE HELP PLEASE!Why is wax the same suspense when it melts from a candle?
(Even though wax melts from a candle, it is still the same substance. Why is that?)
Answer:
it is the same substance because it didn't change the process of that it was it just changed its state for would to liquid
A volcano erupts, and a chunk of hot magma is launched horizontally with a speed of 208\,\dfrac{\text m}{\text s}208 s m 208, start fraction, start text, m, end text, divided by, start text, s, end text, end fraction from a height of 94\,\text m94m94, start text, m, end text. We can ignore air resistance.
Answer:
a. 42.92 m/s b 4.4 s c. 915.2 m
Explanation:
Here is the complete question
A volcano erupts, and a chunk of hot magma is launched horizontally with a speed of 208 m/s, from a height of 94 m. We can ignore air resistance.
What is the vertical velocity of the magma when it hits the ground?
Solution
a. Using v² = u² - 2gy since it is motion under gravity, where u = initial vertical velocity = 0 m/s, g = acceleration due to gravity = -9.8 m/s² and y = height = 94 m.
Substituting these values into the equation, we have
v² = u² - 2gy
v² = 0² - 2 × (-9.8 m/s²) × 94 m
v² = 1842.4 m²/s²
v = √1842.4 m²/s²
v = 42.92 m/s
b. We also find the time it takes to drop from the height of 94 m from
y = ut - 1/2gt² , u = 0
So, t = √(2y/g)
= √(2 × 94 m ÷ 9.8 m/s²)
= √19.184 s²
= 4.4 s
c. The horizontal distance the chunk of hot magma covers is thus x = Vt where v = horizontal velocity = 208 m/s
x = 208 m/s × 4.4 s = 915.2 m
Answer:
that's wrong its 911
Explanation:
trust me
If a car travels 40 mph for a distance of 1680 miles, how much time did it take?
Answer:
42 hour
Explanation:
It is given that,
Speed of a car, v = 40 mph
Distance covered by the car, d = 1680 miles
We need to find the time taken by the car to cover this distance. We can find it using the formula of speed which is equal to the distance covered divided by the time taken. Let the time is t.
speed = distance/time taken
[tex]t=\dfrac{d}{s}\\\\t=\dfrac{1680\ \text{miles}}{40\ \text{mph}}\\\\t=42\ \text{hour}[/tex]
Hence, the car will take 42 hours to cover 1680 miles with a speed of 40 mph.
Which has more inertia?
A human or an elephant and explain why?
Answer:
A human
Explanation:
An elephant weighs more, therefore it's gravitational pull by Earth impacts it more than a human.
Hope this helps!
Have a nice day!
If you find my answer helpful
Pls consider marking my answer as Brainliest! It would mean a lot!
Answer:
Explanation:
Think of it this way: An elephant has more inertia than a human. It is much harder to push an elephant across a floor than it is a human, and much harder to stop the elephant once it is moving. Therefore, by definition, an elephant has more mass than a human.
A go cart engine applies a force of 888N and moves the cart forward 22m.
a) How much work is done?
b) We put on a bigger engine (1111N) but the cart still moves forward 22m. How much work is done now?
c) Why would you put on a bigger engine if you are still moving 22m?
Answer:
Explanation:
a) work=Force times distance. given force is 888N and distance travelled is 22M
work= 888 x 22 = 19536J or 1.954x10^5J
b) work = 1111 x 22= 24442J or 2.444x10^5J
c) putting on a larger engine means that there are gonna be more force applied to the go cart. therefore the cart will travel the same distance faster
a. The amount of work done by the go cart engine is 19,536 Nm.
b. The amount of work done when a bigger engine is used is 24,442 Nm.
c. The reason why a bigger engine is used is, so that the engine can easily do more work in the same amount of distance.
Given the following data:
Force A = 888 NewtonDistance = 22 meterForce B = 1111 Newtona. To determine the amount of work done by the go cart engine:
Mathematically, the work done by an object is given by the formula;
[tex]Work\;done = Force \times distance[/tex]
Substituting the given parameters into the formula, we have;
[tex]Work\;done = 888 \times 22[/tex]
Work done = 19,536 Nm.
b. To determine the amount of work done when a bigger engine is used:
[tex]Work\;done = Force \times distance[/tex]
[tex]Work\;done = 1111 \times 22[/tex]
Work done = 24,442 Nm.
c. The reason why a bigger engine is used is, so that the engine can easily do more work in the same amount of distance.
Read more: https://brainly.com/question/22599382
When an object gains thermal energy, the molecules inside the object move faster.
True or False?
Answer:
true
Explanation:
when the heat rises the molecules inside vibrate much faster than when ever they cool down because they are slower, think of it as if you were frozen but could still move, you'd be slow but if you weren't and were warmer your system can work more and you can run faster than when you were frozen.
13. How much dimmer than the sun is Eridani B2
Answer: Eridani B2 appears only [tex]6.73[/tex]×[tex]10^{-13}[/tex] as bright as the sun.
What is the point on the globe to the right that receives 24 hours of daylight on the December solstice?
Answer:
north of 66.5 degrees latitude;90 degrees minus and filt of earth axis receive 24 hrs of sunlight
How fast would an inline skater have been traveling if he had covered 400 m in 10
seconds?
Answer:
The answer is 40 m/sExplanation:
The speed or velocity of an object given it's distance and time taken can be found by using the formula
[tex]v = \frac{d}{t} \\ [/tex]
From the question we have
[tex]v = \frac{400}{10} \\ [/tex]
We have the final answer as
40 m/sHope this helps you
what are the 2 forces acting on a projectile
Answer:
horizontal and vertical motion
Explanation:
By definition, a projectile has a single force that acts upon it - the force of gravity. If there were any other force acting upon an object, then that object would not be a projectile. Thus, the free-body diagram of a projectile would show a single force acting downwards and labeled force of gravity (or simply F^grav).
Can someone please help me on this?
Answer:
80
Explanation:
Please help!!
Why is it important to keep the mass (weight) of your car low?
Words to use:
Mass, inversely proportional (as mass goes up, acceleration goes down),
acceleration (to change motion), force
Answer:
Mass is the correct answer.
Explanation:
Many drivers report a more positive handling response and a definite improvement when reducing unsprung mass. You want to keep unsprung weight to as little as possible. This minimizes the momentum and energies that your suspension has to counter. In effect, it can make your shocks more sensitive.
Answer:
If you push hard, the block's bottom will move out from under its center of gravity and the block will tip over. The taller the block, the easier it is to push the bottom out from under the center of gravity. Keeping a car's center of gravity low is important to avoiding disaster during turns. But if you don't keep the car's center gravity low it will be inversely proportional and the acceleration can be damaged with force, and its mass could get disproportionate.
Explanation:
I'm sorry i tried my best. :/
Mass
An object accelerated at a rate of 50 m/s/s. A force of
100 N was used to make this happen. What is the mass
of the object?
kg
HELP ME PLS
Answer:
2kg
Explanation:
100N = Force 50m/s²= Acceleration
Mass=?
the equation is;
Mass(kg)= Force(N) ÷ Acceleration (m/s²)
100÷50=2
what happens to the wave length and frequency of a wave as it crosses a different medium and speeds
Answer: SEE EXPLANATION!
Explanation:
When waves travel from one medium to another the frequency never changes. As waves travel into the denser medium, they slow down and wavelength decreases. Part of the wave travels faster for longer causing the wave to turn. The wave is slower but the wavelength is shorter meaning frequency remains the same.
I hope this helps you!
Someone, please help me with this
1. Distance traveled during the first minute (A-B) *
40 m
100 m
140 m
180 m
2. Displacement after the first minute (A-B) *
180 m west
180 m east
100 m west
100 m east
3. Distance traveled during the first 2 minutes (A-B-C)
40 m
140 m
320 m
420 m
4. Displacement after the first 2 minutes of travel (A-B-C) *
40 m east
40 m west
140 m east
140 m west
5. Distance traveled during the total time of 3 minutes (A-B-C-D) *
140 m
240 m
360 m
420 m
6. Displacement after the total 3 minutes of travel (A-B-C-D) *
40 m east
40 m west
140 m east
140 m west
Answer:
Explanation:
1). Distance traveled during the first minute (A-B)
= Distance from A to C + Distance from C to D + Distance from D to B
= 40 + 100 + 40
= 180 m
Option (4) will be the answer.
2). Displacement after first minute (A-B)
= Distance from A to B
= 180 m East
Option (2) is the answer.
3). Distance traveled during the first 2 minutes (A - B - C)
= Distance from A to B + Distance from B to C
= 180 + 140
= 320 m
Option (3) will be the answer.
4). Displacement after first 2 minutes (A-B-C)
= Distance between A and C
= 40 m towards east
Option (1) is the answer.
5). Distance traveled during 3 minutes (A-B-C-D)
= Distance between A to B + Distance between B to C + Distance between C to D
= 180 + 140 + 100
= 420 m
Option (4) is the answer.
6). Displacement after total 3 minutes (A-B-C-D)
= Distance between A and D
= Distance between A to C + distance between C to D
= 40 + 100
= 140 m
And the direction is towards East.
Option (3) is the answer.
Which of the following is true? *
Electronics and neutrons have the same mass.
Protons and electrons have the same mass.
All subatomic particles have the same mass.
Protons and neutrons have the same mass.
Answer: D. Protons and neutrons
Explanation: PLEASE GIVE BRAINLIEST IT HELPS ALOT
A delivery truck travels 2.8 km North, 1.0 km East, and 1.6 km South. The final displacement from the origin is ___km to the ___.(round to the nearest tenth) (write the resultant vector as NE, SE, NW, or SW)
Answer:
The final displacement from the origin is 1.6 km to the NE
Explanation:
The directions in which the delivery truck travels are;
1) 2.8 km North = 2.8·[tex]\hat j[/tex], in vector form
2) 1.0 km East = 1.0·[tex]\hat i[/tex], in vector form
3) 1.6 km South = -1.6·[tex]\hat j[/tex], in vector form
Therefore, to find the final displacement, Δx, of the delivery truck, we add the individual displacements as follows;
Final displacement, Δd = 2.8·[tex]\hat j[/tex] + 1.0·[tex]\hat i[/tex] +(-1.6·[tex]\hat j[/tex]) = 1.2·[tex]\hat j[/tex] + 1.0·[tex]\hat i[/tex]
Final displacement, = 1.0·[tex]\hat i[/tex] + 1.2·[tex]\hat j[/tex]
Where;
Δx = The displacement in the x-direction = 1.0·[tex]\hat i[/tex]
Δy = The displacement in the y-direction = 1.2·[tex]\hat j[/tex]
The magnitude of the resultant displacement vector is given as follows
[tex]\left | d \right |[/tex] = √((Δx)² + (Δy)²) = √(1² + 1.2²) ≈ 1.6 (To the nearest tenth)
The magnitude of the resultant displacement vector ≈ 1.6 km
The direction of the resultant vector is positive for both the east and north direction, therefore, the direction of the resultant vector = NE
Therefore, the resultant displacement of the delivery truck is approximately 1.6 km, NE from the origin.
What is the wavelength of a wave with a frequency of 330 Hz and a speed of
343 m/s?
A. 1.04 m
B. 1.13 x 105 m
O C. 8.8 x 10-6 m
D. 0.96 m
Answer:
A
Explanation:
wavelength can be obtained by speed of the wave divided by its frequency
[tex] \frac{343}{330} [/tex]
1.04m
Answer:
Correct answer - A) 1.04 m
Explanation: just did the quiz
what does a worm and wheel mechanism do to torque and speed
Answer:Explanation:
Image result for what does a worm and wheel mechanism do to torque and speed
Like other gear arrangements, a worm drive can reduce rotational speed or transmit higher torque. ... Each full 360 degree turn of a single start worm advances the gear by one tooth. For a multi start worm the gear reduction equals the number of teeth on the gear divided by the number of starts on the worm.
Which of the following statements is not true about genes?
A. Genes consist of hormones that regulate bodily functions.
B. Genes are DNA segments that are carried in each chromosome.
C. Genes serve as the biochemical units of heredity.
D. Genes operate in pairs and influence one's physical traits.
Answer:
A.) Genes consist of hormones that regulate bodily functions.
Explanation:
The statements (A), (B) and (C) are correct to explain the functions of Genes in a human body.
The given problem is based on the concept and fundamentals of Genes. Genes in a human body acts as a set of instruction that determine the likings of the organism, its appearance, and its behavior in its environment.
As per the above definition, Genes are the hormones that is responsible for the regulation of functions of body.Genes are made of a substance called deoxyribonucleic acid, or DNA. Moreover, it is a short section of DNA that contains instructions that tell the cells to make molecules called proteins.It is responsible for the transmission of hereditary from one biological unit to another, therefore it is known to serve as Biochemical unit for Heredity.Thus, we can conclude that the statements (A), (B) and (C) are correct to explain the functions of Genes in a human body.
Learn more about the Genes here:
https://brainly.com/question/8832859
how many tennis balls are in 8 bags if each bag holds 25 tennis balls.
The answer is 200, 200 tennis balls would be in 8 bags if they each held 25.
Answer:
200 balls
Explanation:
The temperature of a 5.0 kg block increases by 3 degrees C when 2,000 J of thermal energy are added to the block. What is the specific heat of the block? _____________
Which refers to the distance between two crests or two troughs on a transverse wave? wavelength amplitude frequency hertz
Answer:
Wavelength
Explanation:
The distance between two crests or two troughs on a transverse wave is known as the wavelength.
What is a wavelength?The wavelength of a periodic wave is its spatial period or the distance over which the wave's structure repeats. It's the distance between two adjacent corresponding points of the same phase on the wave, such as two adjacent crests, troughs, or zero-crossings, and it's a feature of both travelling and standing waves, as well as other spatial wave patterns.
As discussed above the wavelength, therefore, the distance between two crests or two troughs on a transverse wave is known as the wavelength.
Learn more about Wavelength:
https://brainly.com/question/13533093
HURRY PLEASE!!
The particles of solids are packed together tightly, so sound waves travel faster through solids than through liquids or gases. How do light waves differ from sound waves?
A. Light waves require a medium and travel fastest through liquids
B. Light waves require a medium, but travel fastest through a vacuum
C. Light waves do not require a medium, but travel fastest through solids
D.
Light waves do not require a medium and travel fastest when in a vacuum
Answer:
Hope it help you
Stayhomestaysafe
Plz mark my answer brainliest✍️✍️
Explanation:
Sound travels fastest through solids. This is because molecules in a solid medium are much closer together than those in a liquid or gas, allowing sound waves to travel more quickly through it. In fact, sound waves travel over 17 times faster through steel than through air.
Option b
REAL NAME - SHRESTH DUBEY
A 1200 kg car accelerates from rest for 45 meters in 6.0 seconds. What is the net force on the car?
Answer:
Explanation:
At first, you have to get the acceleration value from the given data.
[tex]s=ut+\frac{1}{2}at^{2}[/tex]
s= 45m
u= 0 m/s
t = 6s
a = ?
45 = 0+ 0.5 × a × 6²
45 = 0.5 × 36 × a
45 = 18a
a = 2.5 m/s²
Now, you can use F=ma equation
F = ?
m = 1200kg
a = 2.5 m/s²
F = 1200 × 2.5
F = 3000 N
