Help asap pls! Circulating air caused when warm air rises and cool air sinks. Convection currents occur throughout the world.
1.barrage 2.collection area 3.convection current

Answer:

The light is transmitted through the curtain.

Explanation:

I believe this might be the answer, please comment if it’s incorrect

Answer: The phase change for A and B respectively is condensation, freezing.

Explanation:

A process in which gaseous state of a substance converts into liquid state is called condensation.

For example, conversion of steam into water.

A process in which liquid state of a substance converts into solid state is called freezing.

For example, conversion of liquid water into ice.

Thus, we can conclude that the phase change for A and B respectively is condensation and freezing.

Condensation and freezing would be the phase change for A and B respectively.

This is the process in which a liquid becomes solid and is mostly caused by exposure to cool temperatures.

Gaseous substances also have the ability to become liquids through the process known as Condensation. This therefore makes option A the most appropriate choice.

Read more about States of matter here https://brainly.com/question/9402776

Answer:

Equilibrium will shift leftwards towards NO2.

Explanation:

Hello there!

In this case, according to the Le Cha telier's principle, it is possible to realize that the increase of the volume turns out in the shift towards the most of the gaseous moles are in; in such a way, for the given chemical reaction, we can notice how NO2 (reactant side) has the most of the moles (2 moles in comparison to 1 mole of N2O4); and therefore, by increasing the volume, the equilibrium will shift to it, it means leftwards.

Best regards!

Answer: All are energy releasing phase changes EXCEPT sublimation.

Explanation:

When molecules with high energy start to lose their energy and begin to settle down then heat energy is released in this process. Hence, this change is exothermic in nature.

When molecules with low energy absorb heat and start moving randomly from one place to another then molecules move to high energy level. Hence, this change is endothermic in nature.

Condensation - The conversion of gas phase into liquid phase is called condensation. Energy is released in this process.

Freezing - The conversion of liquid phase into solid phase is called freezing. Energy is released in this process.

Deposition - The conversion of gas phase into solid phase is called deposition. Energy is released in this process.

Sublimation - The conversion of a solid phase into gas phase without undergoing liquid phase is called sublimation. Energy is absorbed in this process.

Thus, we can conclude that out of the given options all are energy releasing phase changes EXCEPT sublimation.

The aforementioned options are energy releasing phase changes except: D. Sublimation.

A phase change can be defined as the change in the state (phase) of matter of a given chemical compound or substance such as:

In Science, a change in the state (phase) of matter that results in the release of energy is known as an exothermic reaction such as:

In conclusion, sublimation​ is not an energy releasing phase change because it is an endothermic reaction.

Read more on energy here: https://brainly.com/question/1242059

Answer: chlorophyll

Explanation: Photosynthetic cells contain chlorophyll and other light-sensitive pigments that capture solar energy.

Answer:

A.The sound becomes louder.

And

C.The sound waves get further.

Explanation:

Louder the sound it will travel long.

Answer:

Na2CO3 + CaCl2 → CaCO3 + 2 NaCl

Explanation:

A double displacement reaction is a type of metathesis reaction in which two reactants exchange ions to form two new compounds. Double displacement reactions usually involve reacting two soluble salts in aqueous solution resulting in the formation of two products: a soluble salt and an insoluble salt that is produced as a precipitate.

If the reaction of two soluble compounds does not produce a precipitate, the reaction does not result in the formation of a product as basically, all the ions are mixed together in the reaction vessel.

From the given reactions above:

1. 3 KBr + AlPO4 → K3PO4 + AlBr3

The reaction does not proceed to product formation as the two products are all soluble salts.

2. Na2CO3 + CaCl2 → CaCO3 + 2 NaCl

The reaction occurs as one of the products, CaCO3 is insoluble as is produced as a precipitate.

3. NH4OH + KCl → KOH + NH4Cl

The reaction does nott occuras the products are all soluble in water.

4. ZnCl2 + Mg2SO4 → ZnSO4 + MgCl2

The reaction does not occur as the products are all soluble in water.

Answer:

e. None of these.

Explanation:

Hey there!

In this case, since the Henry's law is defined in terms of pressure, henry's constant and pressure, as shown below:

[tex]C=K_H*P[/tex]

Whereas C is the concentration, KH the Henry's constant and P the pressure, we infer that the concentration of a gas solution is directly proportional to the pressure, which is not the group choices, therefore, the answer is e. None of these.

Best regards!

Answer:

252 Joules

Explanation:

I thin k this is right, im so sorry if not!! :)

Answer:

C. i don't kow

Explanation:

Answer:

1632 Hz

Explanation:

We'll begin by calculating the frequency of each wave. This can be obtained as follow:

1st wave:

Velocity (v) = 340 m/s.

Wavelength 1 (λ₁) = 5 m

Frequency 1 (f₁) =?

v = λ₁f₁

340 = 5 × f₁

Divide both side by 5

f₁ = 340 / 5

f₁ = 68 Hz

2nd wave:

Velocity (v) = 340 m/s.

Wavelength 2 (λ₂) = 0.2 m

Frequency 2 (f₂) =?

v = λ₂f₂

340 = 0.2 × f₂

Divide both side by 0.2

f₂ = 340 / 0.2

f₂ = 1700 Hz

Finally, we shall determine the difference in the frequency of both waves.

This can be obtained as follow:

Frequency 1 (f₁) = 68 Hz

Frequency 2 (f₂) = 1700 Hz

Difference =?

Difference = f₂ – f₁

Difference = 1700 – 68

Difference = 1632 Hz

Answer:

In artificial selection, humans have the capacity to influence certain characteristics of organisms by selective breeding. One can choose desired parental traits determined by genes, which are then passed on to offspring.

Answer:

0.917 L

Explanation:

Step 1: Given data

Step 2: Calculate the moles corresponding to 36.0 g of Ca(OH)₂

The molar mass of Ca(OH)₂ is 74.09 g/mol.

36.0 g × 1 mol/74.09 g = 0.486 mol

Step 3: Calculate the volume of the solution

Molarity is equal to the moles of solute divided by the liters of solution.

M = moles of solute / liters of solution

liters of solution = moles of solute / M

liters of solution = 0.486 mol / (0.530 mol/L) = 0.917 L

Answer:

0.917 liters

Hope this helps! :D

Explanation:

5.

(08.02 MC)

A 0.530 M Ca(OH)2 solution was prepared by dissolving 36.0 grams of Ca(OH)2 in enough water. What is the total volume of the solution thus formed? (4 points)

Answer:

19 protons, 20 neutrons and 18 electrons.

Explanation:

Answer:

2 NaBr(aq) + Cl₂(g) ⇒ 2 NaCl(aq) + Br₂(l)

Explanation:

Let's consider the unbalanced equation that occurs when aqueous sodium bromide reacts with chlorine gas to form aqueous sodium chloride and liquid bromine. This is a single displacement reaction.

NaBr(aq) + Cl₂(g) ⇒ NaCl(aq) + Br₂(l)

We will start balancing Cl atoms by multiplying NaCl by 2.

NaBr(aq) + Cl₂(g) ⇒ 2 NaCl(aq) + Br₂(l)

Then, we get the balanced equation by multiplying NaBr by 2.

2 NaBr(aq) + Cl₂(g) ⇒ 2 NaCl(aq) + Br₂(l)

Answer:

Li + ZnCO3

Explanation:

Li is higher than Zn on the activity series so Ln is more easily oxidized and prefers to be in a compound. For the rest of the reactions, the element that is higher on the activity series is already in the compound, so the reactions wouldn't happen.

Answer:

C. Li + ZnCO3

Explanation:

edge 2021

Answer:

Calcium oxide: CaO

Copper (II) nitrate: Cu(NO₃)₂

Ammonium chloride: NH₄Cl

Magnesium sulfate: MgSO₄

Copper (I) oxide: Cu₂O

Calcium chloride: CaCl₂

Explanation:

Hello there!

In this case, according the IUPAC rules for naming this inorganic salts, whereas calcium, copper (II), ammonium, magnesium and copper (I) are the cations and oxide, nitrate, chloride and sulfate are the anions, we proceed as follows:

Calcium oxide: CaO

Copper (II) nitrate: Cu(NO₃)₂

Ammonium chloride: NH₄Cl

Magnesium sulfate: MgSO₄

Copper (I) oxide: Cu₂O

Calcium chloride: CaCl₂

Best regards!

Answer:

Explanation:

The volume of a substance when given the density and mass can be found by using the formula

[tex]volume = \frac{mass}{density} \\[/tex]

We have

[tex]volume = \frac{24}{8} = 3 \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

1.sea water 2.fresh water 3. Salt and ice

4.salted roads 5. Sugar solution used for making candy

Explanation:

Because Truck

Answer:

salted roads

sugar something

pure water

Explanation:

trust me bro

Answer:

The answer is a

Explanation:because yes

Answer: The answer is B.

Explanation: The rocks falling off is caused by gravity. Other options don't include effects of gravity; Therefore, B is correct.

Answer:

Most common oxidation states: +2, +3

M.P. 1535º

B.P. 2750º

Density 7.87 g/cm3

Characteristics: Iron is a gray, moderately active metal.

Characteristic reactions of Fe²⁺ and Fe³⁺

The [Fe(H2O)6]3+ ion is colorless (or pale pink), but many solutions containing this ion are yellow or amber-colored because of hydrolysis. Iron in both oxidation states forms many complex ions.

Aqueous Ammonia

Aqueous ammonia reacts with Fe(II) ions to produce white gelatinous Fe(OH)2, which oxidizes to form red-brown Fe(OH)3:

Fe2+(aq)+2NH3(aq)+3H2O(l)↽−−⇀Fe(OH)2(s)+2NH+4(aq)(1)

Fe3appt.gif

Aqueous ammonia reacts with Fe(III) ions to produce red-brown Fe(OH)3:

Fe3+(aq)+3NH3(aq)+3H2O(l)↽−−⇀Fe(OH)3(s)+3NH+4(aq)(2)

Fe3bppt.gif

Both precipitates are insoluble in excess aqueous ammonia. Iron(II) hydroxide quickly oxidizes to Fe(OH)3 in the presence of air or other oxidizing agents.

Sodium Hydroxide

Sodium hydroxide also produces Fe(OH)2 and Fe(OH)3 from the corresponding oxidation states of iron in aqueous solution.

Fe2+(aq)+2OH−(aq)↽−−⇀Fe(OH)2(s)(3)

Fe4appt.gif

Fe3+(aq)+3OH−(aq)↽−−⇀Fe(OH)3(s)(4)

Fe4bppt.gif

Neither hydroxide precipitate dissolves in excess sodium hydroxide.

Potassium Ferrocyanide

Potassium ferrocyanide will react with Fe3+ solution to produce a dark blue precipitate called Prussian blue:

K+(aq)+Fe3+(aq)+[Fe(CN)6]4−(aq)↽−−⇀KFe[Fe(CN)6](s)(5)

Fe5a1ppt.gif

With Fe2+ solution, a white precipitate will be formed that will be converted to blue due to the oxidation by oxygen in air:

2Fe2+(aq)+[Fe(CN)6]4−(aq)↽−−⇀Fe2[Fe(CN)6](s)(6)

Fe5a2ppt.gif

Many metal ions form ferrocyanide precipitates, so potassium ferrocyanide is not a good reagent for separating metal ions. It is used more commonly as a confirmatory test.

Potassium Ferricyanide

Potassium ferricyanide will give a brown coloration but no precipitate with Fe3+. With Fe2+, a dark blue precipitate is formed. Although this precipitate is known as Turnbull's blue, it is identical with Prussian blue (from Equation 5).

K+(aq)+Fe+2(aq)+[Fe(CN)6]3−(aq)↽−−⇀KFe[Fe(CN)6](s)(7)

Fe5b.gif

Potassium Thiocyanate

KSCN will give a deep red coloration to solutions containing Fe3+:

Fe+3(aq)+NCS−(aq)↽−−⇀[FeNCS]+2(aq)(8)

Fe5cppt.gif

No Reaction

Cl−, SO2−4

Answer:

D. Streak.

Explanation:

A mineral, in simple terms, can be defined as a solid inorganic substance that occurs in a pure form with a specific crystal structure. A mineral is identified based on its physical properties which include luster, color, streak, crystal shape, etc.

The color of the powdered form of a mineral is called a streak. A streak is a useful property in distinguishing sulfide and oxide minerals. To check the color of a mineral, it is rubbed against the surface of a ceramic streak plate or a piece of unglazed ceramic. In its finely powdered form, a mineral is easy to identify.

Therefore, option D is correct.

Answer: acid

Explanation:

Answer:

A) Acid

Explanation:

I got the same question and answered correctly

Answer: 0.144 moles. :)

Explanation:

The number  of  moles of NaCl that are contained in 50.0 mL of 2.50 M NaCl is 0.125 moles

Using this formula

Molarity=Moles of solute/Liters of solution

First step is to convert 50.0 mL to Liters

Litres=50.0 ml×1 L/1000 ml

Litres=0.05 L

Now let determie the number of moles of NaCl

2.50M=moles/0.05

moles=2.50M(0.05)

moles = 0.125 moles of NaCl

Inconclusion The number  of  moles of NaCl that are contained in 50.0 mL of 2.50 M NaCl is 0.125 moles

Learn more here:

https://brainly.com/question/2229605

Answer:

The first one is moles and so is the second one.

Explanation:

Answer:

1) Moles

2) Moles

Explanation:

On Edge

Answer:

Eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Explanation: